Merge branch 'next' of https://gitlab.denx.de/u-boot/custodians/u-boot-x86 into next

- Various x86 common codes updated for TPL/SPL
- I2C designware driver updated for PCI
- ICH SPI driver updated to support Apollo Lake
- Add Intel FSP2 base support
- Intel Apollo Lake platform specific drivers support
- Add a new board Google Chromebook Coral

6 files changed, 204 insertions, 94 deletions

diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index c2f75d87559..f5a471f8875 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -14,6 +14,9 @@ obj-$(CONFIG_SYS_I2C_AT91) += at91_i2c.o
 obj-$(CONFIG_SYS_I2C_CADENCE) += i2c-cdns.o
 obj-$(CONFIG_SYS_I2C_DAVINCI) += davinci_i2c.o
 obj-$(CONFIG_SYS_I2C_DW) += designware_i2c.o
+ifdef CONFIG_DM_PCI
+obj-$(CONFIG_SYS_I2C_DW) += designware_i2c_pci.o
+endif
 obj-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o
 obj-$(CONFIG_SYS_I2C_IHS) += ihs_i2c.o
 obj-$(CONFIG_SYS_I2C_INTEL) += intel_i2c.o
diff --git a/drivers/i2c/designware_i2c.c b/drivers/i2c/designware_i2c.c
index 6daa90e7442..b8cdd1c6613 100644
--- a/drivers/i2c/designware_i2c.c
+++ b/drivers/i2c/designware_i2c.c
@@ -13,34 +13,6 @@
 #include <asm/io.h>
 #include "designware_i2c.h"
 
-struct dw_scl_sda_cfg {
-	u32 ss_hcnt;
-	u32 fs_hcnt;
-	u32 ss_lcnt;
-	u32 fs_lcnt;
-	u32 sda_hold;
-};
-
-#ifdef CONFIG_X86
-/* BayTrail HCNT/LCNT/SDA hold time */
-static struct dw_scl_sda_cfg byt_config = {
-	.ss_hcnt = 0x200,
-	.fs_hcnt = 0x55,
-	.ss_lcnt = 0x200,
-	.fs_lcnt = 0x99,
-	.sda_hold = 0x6,
-};
-#endif
-
-struct dw_i2c {
-	struct i2c_regs *regs;
-	struct dw_scl_sda_cfg *scl_sda_cfg;
-	struct reset_ctl_bulk resets;
-#if CONFIG_IS_ENABLED(CLK)
-	struct clk clk;
-#endif
-};
-
 #ifdef CONFIG_SYS_I2C_DW_ENABLE_STATUS_UNSUPPORTED
 static int  dw_i2c_enable(struct i2c_regs *i2c_base, bool enable)
 {
@@ -90,7 +62,9 @@ static unsigned int __dw_i2c_set_bus_speed(struct i2c_regs *i2c_base,
 	unsigned int ena;
 	int i2c_spd;
 
-	if (speed >= I2C_MAX_SPEED)
+	/* Allow max speed if there is no config, or the config allows it */
+	if (speed >= I2C_MAX_SPEED &&
+	    (!scl_sda_cfg || scl_sda_cfg->has_max_speed))
 		i2c_spd = IC_SPEED_MODE_MAX;
 	else if (speed >= I2C_FAST_SPEED)
 		i2c_spd = IC_SPEED_MODE_FAST;
@@ -106,7 +80,6 @@ static unsigned int __dw_i2c_set_bus_speed(struct i2c_regs *i2c_base,
 	cntl = (readl(&i2c_base->ic_con) & (~IC_CON_SPD_MSK));
 
 	switch (i2c_spd) {
-#ifndef CONFIG_X86 /* No High-speed for BayTrail yet */
 	case IC_SPEED_MODE_MAX:
 		cntl |= IC_CON_SPD_SS;
 		if (scl_sda_cfg) {
@@ -119,7 +92,6 @@ static unsigned int __dw_i2c_set_bus_speed(struct i2c_regs *i2c_base,
 		writel(hcnt, &i2c_base->ic_hs_scl_hcnt);
 		writel(lcnt, &i2c_base->ic_hs_scl_lcnt);
 		break;
-#endif
 
 	case IC_SPEED_MODE_STANDARD:
 		cntl |= IC_CON_SPD_SS;
@@ -565,24 +537,19 @@ static int designware_i2c_probe_chip(struct udevice *bus, uint chip_addr,
 	return ret;
 }
 
-static int designware_i2c_probe(struct udevice *bus)
+static int designware_i2c_ofdata_to_platdata(struct udevice *bus)
 {
 	struct dw_i2c *priv = dev_get_priv(bus);
-	int ret;
 
-	if (device_is_on_pci_bus(bus)) {
-#ifdef CONFIG_DM_PCI
-		/* Save base address from PCI BAR */
-		priv->regs = (struct i2c_regs *)
-			dm_pci_map_bar(bus, PCI_BASE_ADDRESS_0, PCI_REGION_MEM);
-#ifdef CONFIG_X86
-		/* Use BayTrail specific timing values */
-		priv->scl_sda_cfg = &byt_config;
-#endif
-#endif
-	} else {
-		priv->regs = (struct i2c_regs *)devfdt_get_addr_ptr(bus);
-	}
+	priv->regs = (struct i2c_regs *)devfdt_get_addr_ptr(bus);
+
+	return 0;
+}
+
+int designware_i2c_probe(struct udevice *bus)
+{
+	struct dw_i2c *priv = dev_get_priv(bus);
+	int ret;
 
 	ret = reset_get_bulk(bus, &priv->resets);
 	if (ret)
@@ -606,7 +573,7 @@ static int designware_i2c_probe(struct udevice *bus)
 	return __dw_i2c_init(priv->regs, 0, 0);
 }
 
-static int designware_i2c_remove(struct udevice *dev)
+int designware_i2c_remove(struct udevice *dev)
 {
 	struct dw_i2c *priv = dev_get_priv(dev);
 
@@ -618,30 +585,7 @@ static int designware_i2c_remove(struct udevice *dev)
 	return reset_release_bulk(&priv->resets);
 }
 
-static int designware_i2c_bind(struct udevice *dev)
-{
-	static int num_cards;
-	char name[20];
-
-	/* Create a unique device name for PCI type devices */
-	if (device_is_on_pci_bus(dev)) {
-		/*
-		 * ToDo:
-		 * Setting req_seq in the driver is probably not recommended.
-		 * But without a DT alias the number is not configured. And
-		 * using this driver is impossible for PCIe I2C devices.
-		 * This can be removed, once a better (correct) way for this
-		 * is found and implemented.
-		 */
-		dev->req_seq = num_cards;
-		sprintf(name, "i2c_designware#%u", num_cards++);
-		device_set_name(dev, name);
-	}
-
-	return 0;
-}
-
-static const struct dm_i2c_ops designware_i2c_ops = {
+const struct dm_i2c_ops designware_i2c_ops = {
 	.xfer		= designware_i2c_xfer,
 	.probe_chip	= designware_i2c_probe_chip,
 	.set_bus_speed	= designware_i2c_set_bus_speed,
@@ -656,28 +600,12 @@ U_BOOT_DRIVER(i2c_designware) = {
 	.name	= "i2c_designware",
 	.id	= UCLASS_I2C,
 	.of_match = designware_i2c_ids,
-	.bind	= designware_i2c_bind,
+	.ofdata_to_platdata = designware_i2c_ofdata_to_platdata,
 	.probe	= designware_i2c_probe,
 	.priv_auto_alloc_size = sizeof(struct dw_i2c),
 	.remove = designware_i2c_remove,
-	.flags = DM_FLAG_OS_PREPARE,
+	.flags	= DM_FLAG_OS_PREPARE,
 	.ops	= &designware_i2c_ops,
 };
 
-#ifdef CONFIG_X86
-static struct pci_device_id designware_pci_supported[] = {
-	/* Intel BayTrail has 7 I2C controller located on the PCI bus */
-	{ PCI_VDEVICE(INTEL, 0x0f41) },
-	{ PCI_VDEVICE(INTEL, 0x0f42) },
-	{ PCI_VDEVICE(INTEL, 0x0f43) },
-	{ PCI_VDEVICE(INTEL, 0x0f44) },
-	{ PCI_VDEVICE(INTEL, 0x0f45) },
-	{ PCI_VDEVICE(INTEL, 0x0f46) },
-	{ PCI_VDEVICE(INTEL, 0x0f47) },
-	{},
-};
-
-U_BOOT_PCI_DEVICE(i2c_designware, designware_pci_supported);
-#endif
-
 #endif /* CONFIG_DM_I2C */
diff --git a/drivers/i2c/designware_i2c.h b/drivers/i2c/designware_i2c.h
index 20ff20d9b83..48766d08067 100644
--- a/drivers/i2c/designware_i2c.h
+++ b/drivers/i2c/designware_i2c.h
@@ -7,6 +7,8 @@
 #ifndef __DW_I2C_H_
 #define __DW_I2C_H_
 
+#include <reset.h>
+
 struct i2c_regs {
 	u32 ic_con;		/* 0x00 */
 	u32 ic_tar;		/* 0x04 */
@@ -131,4 +133,37 @@ struct i2c_regs {
 #define I2C_FAST_SPEED		400000
 #define I2C_STANDARD_SPEED	100000
 
+/**
+ * struct dw_scl_sda_cfg - I2C timing configuration
+ *
+ * @has_max_speed: Support maximum speed (1Mbps)
+ * @ss_hcnt: Standard speed high time in ns
+ * @fs_hcnt: Fast speed high time in ns
+ * @ss_lcnt: Standard speed low time in ns
+ * @fs_lcnt: Fast speed low time in ns
+ * @sda_hold: SDA hold time
+ */
+struct dw_scl_sda_cfg {
+	bool has_max_speed;
+	u32 ss_hcnt;
+	u32 fs_hcnt;
+	u32 ss_lcnt;
+	u32 fs_lcnt;
+	u32 sda_hold;
+};
+
+struct dw_i2c {
+	struct i2c_regs *regs;
+	struct dw_scl_sda_cfg *scl_sda_cfg;
+	struct reset_ctl_bulk resets;
+#if CONFIG_IS_ENABLED(CLK)
+	struct clk clk;
+#endif
+};
+
+extern const struct dm_i2c_ops designware_i2c_ops;
+
+int designware_i2c_probe(struct udevice *bus);
+int designware_i2c_remove(struct udevice *dev);
+
 #endif /* __DW_I2C_H_ */
diff --git a/drivers/i2c/designware_i2c_pci.c b/drivers/i2c/designware_i2c_pci.c
new file mode 100644
index 00000000000..7f0625df66b
--- /dev/null
+++ b/drivers/i2c/designware_i2c_pci.c
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ * Copyright 2019 Google Inc
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <spl.h>
+#include <asm/lpss.h>
+#include "designware_i2c.h"
+
+enum {
+	VANILLA		= 0,	/* standard I2C with no tweaks */
+	INTEL_APL,		/* Apollo Lake I2C */
+};
+
+/* BayTrail HCNT/LCNT/SDA hold time */
+static struct dw_scl_sda_cfg byt_config = {
+	.ss_hcnt = 0x200,
+	.fs_hcnt = 0x55,
+	.ss_lcnt = 0x200,
+	.fs_lcnt = 0x99,
+	.sda_hold = 0x6,
+};
+
+/* Have a weak function for now - possibly should be a new uclass */
+__weak void lpss_reset_release(void *regs);
+
+static int designware_i2c_pci_ofdata_to_platdata(struct udevice *dev)
+{
+	struct dw_i2c *priv = dev_get_priv(dev);
+
+	if (spl_phase() < PHASE_SPL) {
+		u32 base;
+		int ret;
+
+		ret = dev_read_u32(dev, "early-regs", &base);
+		if (ret)
+			return log_msg_ret("early-regs", ret);
+
+		/* Set i2c base address */
+		dm_pci_write_config32(dev, PCI_BASE_ADDRESS_0, base);
+
+		/* Enable memory access and bus master */
+		dm_pci_write_config32(dev, PCI_COMMAND, PCI_COMMAND_MEMORY |
+				      PCI_COMMAND_MASTER);
+	}
+
+	if (spl_phase() < PHASE_BOARD_F) {
+		/* Handle early, fixed mapping into a different address space */
+		priv->regs = (struct i2c_regs *)dm_pci_read_bar32(dev, 0);
+	} else {
+		priv->regs = (struct i2c_regs *)
+			dm_pci_map_bar(dev, PCI_BASE_ADDRESS_0, PCI_REGION_MEM);
+	}
+	if (!priv->regs)
+		return -EINVAL;
+
+	/* Save base address from PCI BAR */
+	if (IS_ENABLED(CONFIG_INTEL_BAYTRAIL))
+		/* Use BayTrail specific timing values */
+		priv->scl_sda_cfg = &byt_config;
+
+	return 0;
+}
+
+static int designware_i2c_pci_probe(struct udevice *dev)
+{
+	struct dw_i2c *priv = dev_get_priv(dev);
+
+	if (dev_get_driver_data(dev) == INTEL_APL) {
+		/* Ensure controller is in D0 state */
+		lpss_set_power_state(dev, STATE_D0);
+
+		lpss_reset_release(priv->regs);
+	}
+
+	return designware_i2c_probe(dev);
+}
+
+static int designware_i2c_pci_bind(struct udevice *dev)
+{
+	char name[20];
+
+	/*
+	 * Create a unique device name for PCI type devices
+	 * ToDo:
+	 * Setting req_seq in the driver is probably not recommended.
+	 * But without a DT alias the number is not configured. And
+	 * using this driver is impossible for PCIe I2C devices.
+	 * This can be removed, once a better (correct) way for this
+	 * is found and implemented.
+	 *
+	 * TODO(sjg@chromium.org): Perhaps if uclasses had platdata this would
+	 * be possible. We cannot use static data in drivers since they may be
+	 * used in SPL or before relocation.
+	 */
+	dev->req_seq = gd->arch.dw_i2c_num_cards++;
+	sprintf(name, "i2c_designware#%u", dev->req_seq);
+	device_set_name(dev, name);
+
+	return 0;
+}
+
+static const struct udevice_id designware_i2c_pci_ids[] = {
+	{ .compatible = "snps,designware-i2c-pci" },
+	{ .compatible = "intel,apl-i2c", .data = INTEL_APL },
+	{ }
+};
+
+U_BOOT_DRIVER(i2c_designware_pci) = {
+	.name	= "i2c_designware_pci",
+	.id	= UCLASS_I2C,
+	.of_match = designware_i2c_pci_ids,
+	.bind	= designware_i2c_pci_bind,
+	.ofdata_to_platdata	= designware_i2c_pci_ofdata_to_platdata,
+	.probe	= designware_i2c_pci_probe,
+	.priv_auto_alloc_size = sizeof(struct dw_i2c),
+	.remove = designware_i2c_remove,
+	.flags = DM_FLAG_OS_PREPARE,
+	.ops	= &designware_i2c_ops,
+};
+
+static struct pci_device_id designware_pci_supported[] = {
+	/* Intel BayTrail has 7 I2C controller located on the PCI bus */
+	{ PCI_VDEVICE(INTEL, 0x0f41) },
+	{ PCI_VDEVICE(INTEL, 0x0f42) },
+	{ PCI_VDEVICE(INTEL, 0x0f43) },
+	{ PCI_VDEVICE(INTEL, 0x0f44) },
+	{ PCI_VDEVICE(INTEL, 0x0f45) },
+	{ PCI_VDEVICE(INTEL, 0x0f46) },
+	{ PCI_VDEVICE(INTEL, 0x0f47) },
+	{ PCI_VDEVICE(INTEL, 0x5aac), .driver_data = INTEL_APL },
+	{ PCI_VDEVICE(INTEL, 0x5aae), .driver_data = INTEL_APL },
+	{ PCI_VDEVICE(INTEL, 0x5ab0), .driver_data = INTEL_APL },
+	{ PCI_VDEVICE(INTEL, 0x5ab2), .driver_data = INTEL_APL },
+	{ PCI_VDEVICE(INTEL, 0x5ab4), .driver_data = INTEL_APL },
+	{ PCI_VDEVICE(INTEL, 0x5ab6), .driver_data = INTEL_APL },
+	{},
+};
+
+U_BOOT_PCI_DEVICE(i2c_designware_pci, designware_pci_supported);
diff --git a/drivers/i2c/i2c-uclass.c b/drivers/i2c/i2c-uclass.c
index 44aace3a36a..fe77e646193 100644
--- a/drivers/i2c/i2c-uclass.c
+++ b/drivers/i2c/i2c-uclass.c
@@ -11,7 +11,7 @@
 #include <dm/device-internal.h>
 #include <dm/lists.h>
 #include <dm/pinctrl.h>
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
 #include <asm/gpio.h>
 #endif
 
@@ -485,7 +485,7 @@ uint i2c_get_chip_addr_offset_mask(struct udevice *dev)
 	return chip->chip_addr_offset_mask;
 }
 
-#ifdef CONFIG_DM_GPIO
+#if CONFIG_IS_ENABLED(DM_GPIO)
 static void i2c_gpio_set_pin(struct gpio_desc *pin, int bit)
 {
 	if (bit)
@@ -581,7 +581,7 @@ static int i2c_deblock_gpio(struct udevice *bus)
 {
 	return -ENOSYS;
 }
-#endif // CONFIG_DM_GPIO
+#endif /* DM_GPIO */
 
 int i2c_deblock(struct udevice *bus)
 {
diff --git a/drivers/i2c/muxes/pca954x.c b/drivers/i2c/muxes/pca954x.c
index a630ce991d0..bb2935f8ec0 100644
--- a/drivers/i2c/muxes/pca954x.c
+++ b/drivers/i2c/muxes/pca954x.c
@@ -125,7 +125,7 @@ static int pca954x_ofdata_to_platdata(struct udevice *dev)
 
 static int pca954x_probe(struct udevice *dev)
 {
-	if (IS_ENABLED(CONFIG_DM_GPIO)) {
+	if (CONFIG_IS_ENABLED(DM_GPIO)) {
 		struct pca954x_priv *priv = dev_get_priv(dev);
 		int err;
 
@@ -146,7 +146,7 @@ static int pca954x_probe(struct udevice *dev)
 
 static int pca954x_remove(struct udevice *dev)
 {
-	if (IS_ENABLED(CONFIG_DM_GPIO)) {
+	if (CONFIG_IS_ENABLED(DM_GPIO)) {
 		struct pca954x_priv *priv = dev_get_priv(dev);
 
 		if (dm_gpio_is_valid(&priv->gpio_mux_reset))