diff options
| author | Jonas Karlman | 2023-04-18 16:46:37 +0000 |
|---|---|---|
| committer | Kever Yang | 2023-04-21 15:55:29 +0800 |
| commit | d2cece03003ea811a42d471a4733276391f4e1bf (patch) | |
| tree | c4f252dd574bb292b3605ac7fb4ae9c8f5fc9c03 /drivers/mmc | |
| parent | 8874c417ab87e559c018461effca1191e1c45fe5 (diff) | |
mmc: rockchip_sdhci: Fix HS400 and HS400ES mode on RK3568
Adjust tap number for transmit clock, tap number and delay number for
strobe input to fix HS400 modes on RK3568.
New values have been picked from vendor kernel and u-boot and have
successfully been tested with rock-3a-rk3568_defconfig and
CONFIG_MMC_HS200_SUPPORT=y
CONFIG_MMC_HS400_SUPPORT=y
CONFIG_MMC_HS400_ES_SUPPORT=y
CONFIG_MMC_SPEED_MODE_SET=y
using the following command to switch mode and then read 512 MiB of data
from eMMC into memory,
=> mmc dev 0 0 <mode> && mmc info && mmc read 10000000 2000 10000
for each of the modes below.
0 = MMC legacy
1 = MMC High Speed (26MHz)
3 = MMC High Speed (52MHz)
4 = MMC DDR52 (52MHz)
10 = HS200 (200MHz)
11 = HS400 (200MHz)
12 = HS400ES (200MHz)
Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/rockchip_sdhci.c | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/drivers/mmc/rockchip_sdhci.c b/drivers/mmc/rockchip_sdhci.c index bcf65e09174..12a616d3dfb 100644 --- a/drivers/mmc/rockchip_sdhci.c +++ b/drivers/mmc/rockchip_sdhci.c @@ -69,13 +69,13 @@ #define DWCMSHC_EMMC_DLL_DLYENA BIT(27) #define DLL_RXCLK_NO_INVERTER BIT(29) #define DLL_RXCLK_ORI_GATE BIT(31) -#define DLL_TXCLK_TAPNUM_DEFAULT 0xA +#define DLL_TXCLK_TAPNUM_DEFAULT 0x10 #define DLL_TXCLK_TAPNUM_FROM_SW BIT(24) -#define DLL_STRBIN_TAPNUM_DEFAULT 0x8 +#define DLL_STRBIN_TAPNUM_DEFAULT 0x4 #define DLL_STRBIN_TAPNUM_FROM_SW BIT(24) #define DLL_STRBIN_DELAY_NUM_SEL BIT(26) #define DLL_STRBIN_DELAY_NUM_OFFSET 16 -#define DLL_STRBIN_DELAY_NUM_DEFAULT 0x16 +#define DLL_STRBIN_DELAY_NUM_DEFAULT 0x10 #define DLL_LOCK_WO_TMOUT(x) \ ((((x) & DWCMSHC_EMMC_DLL_LOCKED) == DWCMSHC_EMMC_DLL_LOCKED) && \ |