diff options
| author | Michael Walle | 2021-03-17 15:01:37 +0100 |
|---|---|---|
| committer | Peng Fan | 2021-04-06 18:36:04 +0800 |
| commit | d3b745f7d00d07767a0ed85a6b139feeb8df9aaf (patch) | |
| tree | 3acce1e9caed60d740445948f654d35f6445e731 /drivers/mmc | |
| parent | bd7b8505f2c0c87785488a040ff7d2711465b401 (diff) | |
mmc: fsl_esdhc: add pulse width detection workaround
HS400 mode on the LS1028A SoC isn't reliable. The linux driver has a
workaroung for the pulse width detection. Apply this workaround in
u-boot, too.
This will make HS400 mode work reliably on the LS1028A SoC.
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/Kconfig | 3 | ||||
| -rw-r--r-- | drivers/mmc/fsl_esdhc.c | 6 |
2 files changed, 8 insertions, 1 deletions
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index b0ff92b5fa1..492567575ec 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -816,3 +816,6 @@ config SYS_FSL_ERRATUM_ESDHC_A001 config SYS_FSL_ERRATUM_A011334 bool + +config SYS_FSL_ESDHC_UNRELIABLE_PULSE_DETECTION_WORKAROUND + bool diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 09ea1a9de91..7501fdb71e1 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -71,7 +71,8 @@ struct fsl_esdhc { uint sdtimingctl; /* SD timing control register */ char reserved8[20]; /* reserved */ uint dllcfg0; /* DLL config 0 register */ - char reserved9[12]; /* reserved */ + uint dllcfg1; /* DLL config 1 register */ + char reserved9[8]; /* reserved */ uint dllstat0; /* DLL status 0 register */ char reserved10[664];/* reserved */ uint esdhcctl; /* eSDHC control register */ @@ -767,6 +768,9 @@ static int esdhc_init_common(struct fsl_esdhc_priv *priv, struct mmc *mmc) /* Set timout to the maximum value */ esdhc_clrsetbits32(®s->sysctl, SYSCTL_TIMEOUT_MASK, 14 << 16); + if (IS_ENABLED(CONFIG_SYS_FSL_ESDHC_UNRELIABLE_PULSE_DETECTION_WORKAROUND)) + esdhc_clrbits32(®s->dllcfg1, DLL_PD_PULSE_STRETCH_SEL); + return 0; } |