qe: move drivers/qe/qe.h to include/fsl_qe.h

As the QE firmware struct is shared with Fman, move the header file
out of drivers/qe/.

Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>

8 files changed, 7 insertions, 306 deletions

diff --git a/drivers/qe/fdt.c b/drivers/qe/fdt.c
index dfae4bf64de..4f48f984ab5 100644
--- a/drivers/qe/fdt.c
+++ b/drivers/qe/fdt.c
@@ -10,7 +10,7 @@
 #include <common.h>
 #include <libfdt.h>
 #include <fdt_support.h>
-#include "qe.h"
+#include <fsl_qe.h>
 
 #ifdef CONFIG_QE
 DECLARE_GLOBAL_DATA_PTR;
diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
index 08620b23a71..8f00817c506 100644
--- a/drivers/qe/qe.c
+++ b/drivers/qe/qe.c
@@ -12,7 +12,7 @@
 #include "asm/errno.h"
 #include "asm/io.h"
 #include "linux/immap_qe.h"
-#include "qe.h"
+#include <fsl_qe.h>
 #ifdef CONFIG_LS102XA
 #include <asm/arch/immap_ls102xa.h>
 #endif
diff --git a/drivers/qe/qe.h b/drivers/qe/qe.h
deleted file mode 100644
index 77b18e928ff..00000000000
--- a/drivers/qe/qe.h
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * Copyright (C) 2006-2009 Freescale Semiconductor, Inc.
- *
- * Dave Liu <daveliu@freescale.com>
- * based on source code of Shlomi Gridish
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __QE_H__
-#define __QE_H__
-
-#include "common.h"
-#ifdef CONFIG_U_QE
-#include <linux/immap_qe.h>
-#endif
-
-#define QE_NUM_OF_BRGS	16
-#define UCC_MAX_NUM	8
-
-#define QE_DATAONLY_BASE	0
-#define QE_DATAONLY_SIZE	(QE_MURAM_SIZE - QE_DATAONLY_BASE)
-
-/* QE threads SNUM
-*/
-typedef enum qe_snum_state {
-	QE_SNUM_STATE_USED,   /* used */
-	QE_SNUM_STATE_FREE    /* free */
-} qe_snum_state_e;
-
-typedef struct qe_snum {
-	u8		num;   /* snum	*/
-	qe_snum_state_e	state; /* state */
-} qe_snum_t;
-
-/* QE RISC allocation
-*/
-#define	QE_RISC_ALLOCATION_RISC1	0x1  /* RISC 1 */
-#define	QE_RISC_ALLOCATION_RISC2	0x2  /* RISC 2 */
-#define	QE_RISC_ALLOCATION_RISC3	0x4  /* RISC 3 */
-#define	QE_RISC_ALLOCATION_RISC4	0x8  /* RISC 4 */
-#define	QE_RISC_ALLOCATION_RISC1_AND_RISC2 	(QE_RISC_ALLOCATION_RISC1 | \
-						 QE_RISC_ALLOCATION_RISC2)
-#define	QE_RISC_ALLOCATION_FOUR_RISCS	(QE_RISC_ALLOCATION_RISC1 | \
-					 QE_RISC_ALLOCATION_RISC2 | \
-					 QE_RISC_ALLOCATION_RISC3 | \
-					 QE_RISC_ALLOCATION_RISC4)
-
-/* QE CECR commands for UCC fast.
-*/
-#define QE_CR_FLG			0x00010000
-#define QE_RESET			0x80000000
-#define QE_INIT_TX_RX			0x00000000
-#define QE_INIT_RX			0x00000001
-#define QE_INIT_TX			0x00000002
-#define QE_ENTER_HUNT_MODE		0x00000003
-#define QE_STOP_TX			0x00000004
-#define QE_GRACEFUL_STOP_TX		0x00000005
-#define QE_RESTART_TX			0x00000006
-#define QE_SWITCH_COMMAND		0x00000007
-#define QE_SET_GROUP_ADDRESS		0x00000008
-#define QE_INSERT_CELL			0x00000009
-#define QE_ATM_TRANSMIT			0x0000000a
-#define QE_CELL_POOL_GET		0x0000000b
-#define QE_CELL_POOL_PUT		0x0000000c
-#define QE_IMA_HOST_CMD			0x0000000d
-#define QE_ATM_MULTI_THREAD_INIT	0x00000011
-#define QE_ASSIGN_PAGE			0x00000012
-#define QE_START_FLOW_CONTROL		0x00000014
-#define QE_STOP_FLOW_CONTROL		0x00000015
-#define QE_ASSIGN_PAGE_TO_DEVICE	0x00000016
-#define QE_GRACEFUL_STOP_RX		0x0000001a
-#define QE_RESTART_RX			0x0000001b
-
-/* QE CECR Sub Block Code - sub block code of QE command.
-*/
-#define QE_CR_SUBBLOCK_INVALID		0x00000000
-#define QE_CR_SUBBLOCK_USB		0x03200000
-#define QE_CR_SUBBLOCK_UCCFAST1		0x02000000
-#define QE_CR_SUBBLOCK_UCCFAST2		0x02200000
-#define QE_CR_SUBBLOCK_UCCFAST3		0x02400000
-#define QE_CR_SUBBLOCK_UCCFAST4		0x02600000
-#define QE_CR_SUBBLOCK_UCCFAST5		0x02800000
-#define QE_CR_SUBBLOCK_UCCFAST6		0x02a00000
-#define QE_CR_SUBBLOCK_UCCFAST7		0x02c00000
-#define QE_CR_SUBBLOCK_UCCFAST8		0x02e00000
-#define QE_CR_SUBBLOCK_UCCSLOW1		0x00000000
-#define QE_CR_SUBBLOCK_UCCSLOW2		0x00200000
-#define QE_CR_SUBBLOCK_UCCSLOW3		0x00400000
-#define QE_CR_SUBBLOCK_UCCSLOW4		0x00600000
-#define QE_CR_SUBBLOCK_UCCSLOW5		0x00800000
-#define QE_CR_SUBBLOCK_UCCSLOW6		0x00a00000
-#define QE_CR_SUBBLOCK_UCCSLOW7		0x00c00000
-#define QE_CR_SUBBLOCK_UCCSLOW8		0x00e00000
-#define QE_CR_SUBBLOCK_MCC1		0x03800000
-#define QE_CR_SUBBLOCK_MCC2		0x03a00000
-#define QE_CR_SUBBLOCK_MCC3		0x03000000
-#define QE_CR_SUBBLOCK_IDMA1		0x02800000
-#define QE_CR_SUBBLOCK_IDMA2		0x02a00000
-#define QE_CR_SUBBLOCK_IDMA3		0x02c00000
-#define QE_CR_SUBBLOCK_IDMA4		0x02e00000
-#define QE_CR_SUBBLOCK_HPAC		0x01e00000
-#define QE_CR_SUBBLOCK_SPI1		0x01400000
-#define QE_CR_SUBBLOCK_SPI2		0x01600000
-#define QE_CR_SUBBLOCK_RAND		0x01c00000
-#define QE_CR_SUBBLOCK_TIMER		0x01e00000
-#define QE_CR_SUBBLOCK_GENERAL		0x03c00000
-
-/* QE CECR Protocol - For non-MCC, specifies mode for QE CECR command.
-*/
-#define QE_CR_PROTOCOL_UNSPECIFIED	0x00 /* For all other protocols */
-#define QE_CR_PROTOCOL_HDLC_TRANSPARENT	0x00
-#define QE_CR_PROTOCOL_ATM_POS		0x0A
-#define QE_CR_PROTOCOL_ETHERNET		0x0C
-#define QE_CR_PROTOCOL_L2_SWITCH	0x0D
-#define QE_CR_PROTOCOL_SHIFT		6
-
-/* QE ASSIGN PAGE command
-*/
-#define QE_CR_ASSIGN_PAGE_SNUM_SHIFT	17
-
-/* Communication Direction.
-*/
-typedef enum comm_dir {
-	COMM_DIR_NONE		= 0,
-	COMM_DIR_RX		= 1,
-	COMM_DIR_TX		= 2,
-	COMM_DIR_RX_AND_TX	= 3
-} comm_dir_e;
-
-/* Clocks and BRG's
-*/
-typedef enum qe_clock {
-	QE_CLK_NONE = 0,
-	QE_BRG1,     /* Baud Rate Generator  1 */
-	QE_BRG2,     /* Baud Rate Generator  2 */
-	QE_BRG3,     /* Baud Rate Generator  3 */
-	QE_BRG4,     /* Baud Rate Generator  4 */
-	QE_BRG5,     /* Baud Rate Generator  5 */
-	QE_BRG6,     /* Baud Rate Generator  6 */
-	QE_BRG7,     /* Baud Rate Generator  7 */
-	QE_BRG8,     /* Baud Rate Generator  8 */
-	QE_BRG9,     /* Baud Rate Generator  9 */
-	QE_BRG10,    /* Baud Rate Generator 10 */
-	QE_BRG11,    /* Baud Rate Generator 11 */
-	QE_BRG12,    /* Baud Rate Generator 12 */
-	QE_BRG13,    /* Baud Rate Generator 13 */
-	QE_BRG14,    /* Baud Rate Generator 14 */
-	QE_BRG15,    /* Baud Rate Generator 15 */
-	QE_BRG16,    /* Baud Rate Generator 16 */
-	QE_CLK1,     /* Clock  1	       */
-	QE_CLK2,     /* Clock  2	       */
-	QE_CLK3,     /* Clock  3	       */
-	QE_CLK4,     /* Clock  4	       */
-	QE_CLK5,     /* Clock  5	       */
-	QE_CLK6,     /* Clock  6	       */
-	QE_CLK7,     /* Clock  7	       */
-	QE_CLK8,     /* Clock  8	       */
-	QE_CLK9,     /* Clock  9	       */
-	QE_CLK10,    /* Clock 10	       */
-	QE_CLK11,    /* Clock 11	       */
-	QE_CLK12,    /* Clock 12	       */
-	QE_CLK13,    /* Clock 13	       */
-	QE_CLK14,    /* Clock 14	       */
-	QE_CLK15,    /* Clock 15	       */
-	QE_CLK16,    /* Clock 16	       */
-	QE_CLK17,    /* Clock 17	       */
-	QE_CLK18,    /* Clock 18	       */
-	QE_CLK19,    /* Clock 19	       */
-	QE_CLK20,    /* Clock 20	       */
-	QE_CLK21,    /* Clock 21	       */
-	QE_CLK22,    /* Clock 22	       */
-	QE_CLK23,    /* Clock 23	       */
-	QE_CLK24,    /* Clock 24	       */
-	QE_CLK_DUMMY
-} qe_clock_e;
-
-/* QE CMXGCR register
-*/
-#define QE_CMXGCR_MII_ENET_MNG_MASK	0x00007000
-#define QE_CMXGCR_MII_ENET_MNG_SHIFT	12
-
-/* QE CMXUCR registers
- */
-#define QE_CMXUCR_TX_CLK_SRC_MASK	0x0000000F
-
-/* QE BRG configuration register
-*/
-#define QE_BRGC_ENABLE			0x00010000
-#define QE_BRGC_DIVISOR_SHIFT		1
-#define QE_BRGC_DIVISOR_MAX		0xFFF
-#define QE_BRGC_DIV16			1
-
-/* QE SDMA registers
-*/
-#define QE_SDSR_BER1			0x02000000
-#define QE_SDSR_BER2			0x01000000
-
-#define QE_SDMR_GLB_1_MSK		0x80000000
-#define QE_SDMR_ADR_SEL			0x20000000
-#define QE_SDMR_BER1_MSK		0x02000000
-#define QE_SDMR_BER2_MSK		0x01000000
-#define QE_SDMR_EB1_MSK			0x00800000
-#define QE_SDMR_ER1_MSK			0x00080000
-#define QE_SDMR_ER2_MSK			0x00040000
-#define QE_SDMR_CEN_MASK		0x0000E000
-#define QE_SDMR_SBER_1			0x00000200
-#define QE_SDMR_SBER_2			0x00000200
-#define QE_SDMR_EB1_PR_MASK		0x000000C0
-#define QE_SDMR_ER1_PR			0x00000008
-
-#define QE_SDMR_CEN_SHIFT		13
-#define QE_SDMR_EB1_PR_SHIFT		6
-
-#define QE_SDTM_MSNUM_SHIFT		24
-
-#define QE_SDEBCR_BA_MASK		0x01FFFFFF
-
-/* Communication Processor */
-#define QE_CP_CERCR_MEE		0x8000	/* Multi-user RAM ECC enable */
-#define QE_CP_CERCR_IEE		0x4000	/* Instruction RAM ECC enable */
-#define QE_CP_CERCR_CIR		0x0800	/* Common instruction RAM */
-
-/* I-RAM */
-#define QE_IRAM_IADD_AIE	0x80000000	/* Auto Increment Enable */
-#define QE_IRAM_IADD_BADDR	0x00080000	/* Base Address */
-#define QE_IRAM_READY		0x80000000
-
-/* Structure that defines QE firmware binary files.
- *
- * See doc/README.qe_firmware for a description of these fields.
- */
-struct qe_firmware {
-	struct qe_header {
-		u32 length;	/* Length of the entire structure, in bytes */
-		u8 magic[3];	/* Set to { 'Q', 'E', 'F' } */
-		u8 version;	/* Version of this layout. First ver is '1' */
-	} header;
-	u8 id[62];		/* Null-terminated identifier string */
-	u8 split;		/* 0 = shared I-RAM, 1 = split I-RAM */
-	u8 count;		/* Number of microcode[] structures */
-	struct {
-		u16 model;	/* The SOC model  */
-		u8 major;	/* The SOC revision major */
-		u8 minor;	/* The SOC revision minor */
-	} __attribute__ ((packed)) soc;
-	u8 padding[4];		/* Reserved, for alignment */
-	u64 extended_modes;	/* Extended modes */
-	u32 vtraps[8];		/* Virtual trap addresses */
-	u8 reserved[4];		/* Reserved, for future expansion */
-	struct qe_microcode {
-		u8 id[32];	/* Null-terminated identifier */
-		u32 traps[16];	/* Trap addresses, 0 == ignore */
-		u32 eccr;	/* The value for the ECCR register */
-		u32 iram_offset;/* Offset into I-RAM for the code */
-		u32 count;	/* Number of 32-bit words of the code */
-		u32 code_offset;/* Offset of the actual microcode */
-		u8 major;	/* The microcode version major */
-		u8 minor;	/* The microcode version minor */
-		u8 revision;	/* The microcode version revision */
-		u8 padding;	/* Reserved, for alignment */
-		u8 reserved[4];	/* Reserved, for future expansion */
-	} __attribute__ ((packed)) microcode[1];
-	/* All microcode binaries should be located here */
-	/* CRC32 should be located here, after the microcode binaries */
-} __attribute__ ((packed));
-
-struct qe_firmware_info {
-	char id[64];		/* Firmware name */
-	u32 vtraps[8];		/* Virtual trap addresses */
-	u64 extended_modes;	/* Extended modes */
-};
-
-void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign);
-void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data);
-uint qe_muram_alloc(uint size, uint align);
-void *qe_muram_addr(uint offset);
-int qe_get_snum(void);
-void qe_put_snum(u8 snum);
-void qe_init(uint qe_base);
-void qe_reset(void);
-void qe_assign_page(uint snum, uint para_ram_base);
-int qe_set_brg(uint brg, uint rate);
-int qe_set_mii_clk_src(int ucc_num);
-int qe_upload_firmware(const struct qe_firmware *firmware);
-struct qe_firmware_info *qe_get_firmware_info(void);
-void ft_qe_setup(void *blob);
-void qe_init(uint qe_base);
-void qe_reset(void);
-
-#ifdef CONFIG_U_QE
-void u_qe_init(void);
-int u_qe_upload_firmware(const struct qe_firmware *firmware);
-void u_qe_resume(void);
-int u_qe_firmware_resume(const struct qe_firmware *firmware,
-			 qe_map_t *qe_immrr);
-#endif
-
-#endif /* __QE_H__ */
diff --git a/drivers/qe/uccf.c b/drivers/qe/uccf.c
index 85386bfc708..e0118865052 100644
--- a/drivers/qe/uccf.c
+++ b/drivers/qe/uccf.c
@@ -12,8 +12,8 @@
 #include "asm/errno.h"
 #include "asm/io.h"
 #include "linux/immap_qe.h"
-#include "qe.h"
 #include "uccf.h"
+#include <fsl_qe.h>
 
 void ucc_fast_transmit_on_demand(ucc_fast_private_t *uccf)
 {
diff --git a/drivers/qe/uccf.h b/drivers/qe/uccf.h
index 55941e4601a..aa817e73ec9 100644
--- a/drivers/qe/uccf.h
+++ b/drivers/qe/uccf.h
@@ -11,8 +11,8 @@
 #define __UCCF_H__
 
 #include "common.h"
-#include "qe.h"
 #include "linux/immap_qe.h"
+#include <fsl_qe.h>
 
 /* Fast or Giga ethernet
 */
diff --git a/drivers/qe/uec.c b/drivers/qe/uec.c
index e0ab04abc27..40cccc2406b 100644
--- a/drivers/qe/uec.c
+++ b/drivers/qe/uec.c
@@ -12,11 +12,11 @@
 #include "asm/errno.h"
 #include "asm/io.h"
 #include "linux/immap_qe.h"
-#include "qe.h"
 #include "uccf.h"
 #include "uec.h"
 #include "uec_phy.h"
 #include "miiphy.h"
+#include <fsl_qe.h>
 #include <phy.h>
 
 /* Default UTBIPAR SMI address */
diff --git a/drivers/qe/uec.h b/drivers/qe/uec.h
index 6b559f7974e..22e248ff1dd 100644
--- a/drivers/qe/uec.h
+++ b/drivers/qe/uec.h
@@ -10,8 +10,8 @@
 #ifndef __UEC_H__
 #define __UEC_H__
 
-#include "qe.h"
 #include "uccf.h"
+#include <fsl_qe.h>
 #include <phy.h>
 
 #define MAX_TX_THREADS				8
diff --git a/drivers/qe/uec_phy.c b/drivers/qe/uec_phy.c
index e701787c41a..272874d3b05 100644
--- a/drivers/qe/uec_phy.c
+++ b/drivers/qe/uec_phy.c
@@ -16,11 +16,11 @@
 #include "asm/errno.h"
 #include "linux/immap_qe.h"
 #include "asm/io.h"
-#include "qe.h"
 #include "uccf.h"
 #include "uec.h"
 #include "uec_phy.h"
 #include "miiphy.h"
+#include <fsl_qe.h>
 #include <phy.h>
 
 #define ugphy_printk(format, arg...)  \