Merge branch 'master' into hpc2

Conflicts:

	drivers/Makefile
Fix the merge conflict in file drivers/Makefile
Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>

3 files changed, 257 insertions, 13 deletions

diff --git a/drivers/Makefile b/drivers/Makefile
index 6a3ea5da255..60ce3b489cc 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -44,7 +44,7 @@ COBJS	= 3c589.o 5701rls.o ali512x.o atmel_usart.o \
 	  serial.o serial_max3100.o \
 	  serial_pl010.o serial_pl011.o serial_xuartlite.o \
 	  sl811_usb.o sm501.o smc91111.o smiLynxEM.o \
-	  status_led.o sym53c8xx.o ahci.o \
+	  status_led.o sym53c8xx.o systemace.o ahci.o \
 	  ti_pci1410a.o tigon3.o tsec.o tsi108_eth.o\
 	  usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \
 	  videomodes.o w83c553f.o \
diff --git a/drivers/cfi_flash.c b/drivers/cfi_flash.c
index 696f9a47ada..5579a1efc15 100644
--- a/drivers/cfi_flash.c
+++ b/drivers/cfi_flash.c
@@ -36,6 +36,7 @@
 
 #include <common.h>
 #include <asm/processor.h>
+#include <asm/io.h>
 #include <asm/byteorder.h>
 #include <environment.h>
 #ifdef	CFG_FLASH_CFI_DRIVER
@@ -931,27 +932,18 @@ static void flash_write_cmd (flash_info_t * info, flash_sect_t sect, uint offset
 		debug ("fwc addr %p cmd %x %x 8bit x %d bit\n", addr.cp, cmd,
 		       cword.c, info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
 		*addr.cp = cword.c;
-#ifdef CONFIG_BLACKFIN
-		asm("ssync;");
-#endif
 		break;
 	case FLASH_CFI_16BIT:
 		debug ("fwc addr %p cmd %x %4.4x 16bit x %d bit\n", addr.wp,
 		       cmd, cword.w,
 		       info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
 		*addr.wp = cword.w;
-#ifdef CONFIG_BLACKFIN
-		asm("ssync;");
-#endif
 		break;
 	case FLASH_CFI_32BIT:
 		debug ("fwc addr %p cmd %x %8.8lx 32bit x %d bit\n", addr.lp,
 		       cmd, cword.l,
 		       info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
 		*addr.lp = cword.l;
-#ifdef CONFIG_BLACKFIN
-		asm("ssync;");
-#endif
 		break;
 	case FLASH_CFI_64BIT:
 #ifdef DEBUG
@@ -966,11 +958,11 @@ static void flash_write_cmd (flash_info_t * info, flash_sect_t sect, uint offset
 		}
 #endif
 		*addr.llp = cword.ll;
-#ifdef CONFIG_BLACKFIN
-		asm("ssync;");
-#endif
 		break;
 	}
+
+	/* Ensure all the instructions are fully finished */
+	sync();
 }
 
 static void flash_unlock_seq (flash_info_t * info, flash_sect_t sect)
diff --git a/drivers/systemace.c b/drivers/systemace.c
new file mode 100644
index 00000000000..3848d9c59c2
--- /dev/null
+++ b/drivers/systemace.c
@@ -0,0 +1,252 @@
+/*
+ * Copyright (c) 2004 Picture Elements, Inc.
+ *    Stephen Williams (XXXXXXXXXXXXXXXX)
+ *
+ *    This source code is free software; you can redistribute it
+ *    and/or modify it in source code form under the terms of the GNU
+ *    General Public License as published by the Free Software
+ *    Foundation; either version 2 of the License, or (at your option)
+ *    any later version.
+ *
+ *    This program is distributed in the hope that it will be useful,
+ *    but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *    GNU General Public License for more details.
+ *
+ *    You should have received a copy of the GNU General Public License
+ *    along with this program; if not, write to the Free Software
+ *    Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ */
+
+/*
+ * The Xilinx SystemACE chip support is activated by defining
+ * CONFIG_SYSTEMACE to turn on support, and CFG_SYSTEMACE_BASE
+ * to set the base address of the device. This code currently
+ * assumes that the chip is connected via a byte-wide bus.
+ *
+ * The CONFIG_SYSTEMACE also adds to fat support the device class
+ * "ace" that allows the user to execute "fatls ace 0" and the
+ * like. This works by making the systemace_get_dev function
+ * available to cmd_fat.c:get_dev and filling in a block device
+ * description that has all the bits needed for FAT support to
+ * read sectors.
+ *
+ * According to Xilinx technical support, before accessing the
+ * SystemACE CF you need to set the following control bits:
+ *      FORCECFGMODE : 1
+ *      CFGMODE : 0
+ *      CFGSTART : 0
+ */
+
+#include <common.h>
+#include <command.h>
+#include <systemace.h>
+#include <part.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_SYSTEMACE
+
+/*
+ * The ace_readw and writew functions read/write 16bit words, but the
+ * offset value is the BYTE offset as most used in the Xilinx
+ * datasheet for the SystemACE chip. The CFG_SYSTEMACE_BASE is defined
+ * to be the base address for the chip, usually in the local
+ * peripheral bus.
+ */
+#if (CFG_SYSTEMACE_WIDTH == 8)
+#if !defined(__BIG_ENDIAN)
+#define ace_readw(off) ((readb(CFG_SYSTEMACE_BASE+off)<<8) | \
+			(readb(CFG_SYSTEMACE_BASE+off+1)))
+#define ace_writew(val, off) {writeb(val>>8, CFG_SYSTEMACE_BASE+off); \
+			      writeb(val, CFG_SYSTEMACE_BASE+off+1);}
+#else
+#define ace_readw(off) ((readb(CFG_SYSTEMACE_BASE+off)) | \
+			(readb(CFG_SYSTEMACE_BASE+off+1)<<8))
+#define ace_writew(val, off) {writeb(val, CFG_SYSTEMACE_BASE+off); \
+			      writeb(val>>8, CFG_SYSTEMACE_BASE+off+1);}
+#endif
+#else
+#define ace_readw(off) (in16(CFG_SYSTEMACE_BASE+off))
+#define ace_writew(val, off) (out16(CFG_SYSTEMACE_BASE+off,val))
+#endif
+
+/* */
+
+static unsigned long systemace_read(int dev, unsigned long start,
+				    unsigned long blkcnt, void *buffer);
+
+static block_dev_desc_t systemace_dev = { 0 };
+
+static int get_cf_lock(void)
+{
+	int retry = 10;
+
+	/* CONTROLREG = LOCKREG */
+	unsigned val = ace_readw(0x18);
+	val |= 0x0002;
+	ace_writew((val & 0xffff), 0x18);
+
+	/* Wait for MPULOCK in STATUSREG[15:0] */
+	while (!(ace_readw(0x04) & 0x0002)) {
+
+		if (retry < 0)
+			return -1;
+
+		udelay(100000);
+		retry -= 1;
+	}
+
+	return 0;
+}
+
+static void release_cf_lock(void)
+{
+	unsigned val = ace_readw(0x18);
+	val &= ~(0x0002);
+	ace_writew((val & 0xffff), 0x18);
+}
+
+block_dev_desc_t *systemace_get_dev(int dev)
+{
+	/* The first time through this, the systemace_dev object is
+	   not yet initialized. In that case, fill it in. */
+	if (systemace_dev.blksz == 0) {
+		systemace_dev.if_type = IF_TYPE_UNKNOWN;
+		systemace_dev.dev = 0;
+		systemace_dev.part_type = PART_TYPE_UNKNOWN;
+		systemace_dev.type = DEV_TYPE_HARDDISK;
+		systemace_dev.blksz = 512;
+		systemace_dev.removable = 1;
+		systemace_dev.block_read = systemace_read;
+
+		/*
+		 * Ensure the correct bus mode (8/16 bits) gets enabled
+		 */
+		ace_writew(CFG_SYSTEMACE_WIDTH == 8 ? 0 : 0x0001, 0);
+
+		init_part(&systemace_dev);
+
+	}
+
+	return &systemace_dev;
+}
+
+/*
+ * This function is called (by dereferencing the block_read pointer in
+ * the dev_desc) to read blocks of data. The return value is the
+ * number of blocks read. A zero return indicates an error.
+ */
+static unsigned long systemace_read(int dev, unsigned long start,
+				    unsigned long blkcnt, void *buffer)
+{
+	int retry;
+	unsigned blk_countdown;
+	unsigned char *dp = buffer;
+	unsigned val;
+
+	if (get_cf_lock() < 0) {
+		unsigned status = ace_readw(0x04);
+
+		/* If CFDETECT is false, card is missing. */
+		if (!(status & 0x0010)) {
+			printf("** CompactFlash card not present. **\n");
+			return 0;
+		}
+
+		printf("**** ACE locked away from me (STATUSREG=%04x)\n",
+		       status);
+		return 0;
+	}
+#ifdef DEBUG_SYSTEMACE
+	printf("... systemace read %lu sectors at %lu\n", blkcnt, start);
+#endif
+
+	retry = 2000;
+	for (;;) {
+		val = ace_readw(0x04);
+
+		/* If CFDETECT is false, card is missing. */
+		if (!(val & 0x0010)) {
+			printf("**** ACE CompactFlash not found.\n");
+			release_cf_lock();
+			return 0;
+		}
+
+		/* If RDYFORCMD, then we are ready to go. */
+		if (val & 0x0100)
+			break;
+
+		if (retry < 0) {
+			printf("**** SystemACE not ready.\n");
+			release_cf_lock();
+			return 0;
+		}
+
+		udelay(1000);
+		retry -= 1;
+	}
+
+	/* The SystemACE can only transfer 256 sectors at a time, so
+	   limit the current chunk of sectors. The blk_countdown
+	   variable is the number of sectors left to transfer. */
+
+	blk_countdown = blkcnt;
+	while (blk_countdown > 0) {
+		unsigned trans = blk_countdown;
+
+		if (trans > 256)
+			trans = 256;
+
+#ifdef DEBUG_SYSTEMACE
+		printf("... transfer %lu sector in a chunk\n", trans);
+#endif
+		/* Write LBA block address */
+		ace_writew((start >> 0) & 0xffff, 0x10);
+		ace_writew((start >> 16) & 0x0fff, 0x12);
+
+		/* NOTE: in the Write Sector count below, a count of 0
+		   causes a transfer of 256, so &0xff gives the right
+		   value for whatever transfer count we want. */
+
+		/* Write sector count | ReadMemCardData. */
+		ace_writew((trans & 0xff) | 0x0300, 0x14);
+
+		/* Reset the configruation controller */
+		val = ace_readw(0x18);
+		val |= 0x0080;
+		ace_writew(val, 0x18);
+
+		retry = trans * 16;
+		while (retry > 0) {
+			int idx;
+
+			/* Wait for buffer to become ready. */
+			while (!(ace_readw(0x04) & 0x0020)) {
+				udelay(100);
+			}
+
+			/* Read 16 words of 2bytes from the sector buffer. */
+			for (idx = 0; idx < 16; idx += 1) {
+				unsigned short val = ace_readw(0x40);
+				*dp++ = val & 0xff;
+				*dp++ = (val >> 8) & 0xff;
+			}
+
+			retry -= 1;
+		}
+
+		/* Clear the configruation controller reset */
+		val = ace_readw(0x18);
+		val &= ~0x0080;
+		ace_writew(val, 0x18);
+
+		/* Count the blocks we transfer this time. */
+		start += trans;
+		blk_countdown -= trans;
+	}
+
+	release_cf_lock();
+
+	return blkcnt;
+}
+#endif /* CONFIG_SYSTEMACE */