Merge https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi

- Allwinner H616 Ethernet support
- sunxi ata debug fix

2 files changed, 37 insertions, 30 deletions

diff --git a/drivers/ata/ahci_sunxi.c b/drivers/ata/ahci_sunxi.c
index 58e345d9983..94a3379c532 100644
--- a/drivers/ata/ahci_sunxi.c
+++ b/drivers/ata/ahci_sunxi.c
@@ -80,18 +80,18 @@ static int sunxi_sata_probe(struct udevice *dev)
 
 	base = dev_read_addr(dev);
 	if (base == FDT_ADDR_T_NONE) {
-		debug("%s: Failed to find address (err=%d\n)", __func__, ret);
+		debug("%s: Failed to find address\n", __func__);
 		return -EINVAL;
 	}
 	reg = (u8 *)base;
 	ret = sunxi_ahci_phy_init(reg);
 	if (ret) {
-		debug("%s: Failed to init phy (err=%d\n)", __func__, ret);
+		debug("%s: Failed to init phy (err=%d)\n", __func__, ret);
 		return ret;
 	}
 	ret = ahci_probe_scsi(dev, base);
 	if (ret) {
-		debug("%s: Failed to probe (err=%d\n)", __func__, ret);
+		debug("%s: Failed to probe (err=%d)\n", __func__, ret);
 		return ret;
 	}
 
@@ -105,7 +105,7 @@ static int sunxi_sata_bind(struct udevice *dev)
 
 	ret = ahci_bind_scsi(dev, &scsi_dev);
 	if (ret) {
-		debug("%s: Failed to bind (err=%d\n)", __func__, ret);
+		debug("%s: Failed to bind (err=%d)\n", __func__, ret);
 		return ret;
 	}
 
diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c
index 9f91a20d1d1..0f6b6bb537e 100644
--- a/drivers/net/sun8i_emac.c
+++ b/drivers/net/sun8i_emac.c
@@ -85,7 +85,9 @@
 
 /* IO mux settings */
 #define SUN8I_IOMUX_H3		2
-#define SUN8I_IOMUX_R40	5
+#define SUN8I_IOMUX_R40		5
+#define SUN8I_IOMUX_H6		5
+#define SUN8I_IOMUX_H616	2
 #define SUN8I_IOMUX		4
 
 /* H3/A64 EMAC Register's offset */
@@ -297,30 +299,29 @@ static void sun8i_adjust_link(struct emac_eth_dev *priv,
 	writel(v, priv->mac_reg + EMAC_CTL0);
 }
 
-static int sun8i_emac_set_syscon_ephy(struct emac_eth_dev *priv, u32 *reg)
+static u32 sun8i_emac_set_syscon_ephy(struct emac_eth_dev *priv, u32 reg)
 {
 	if (priv->use_internal_phy) {
 		/* H3 based SoC's that has an Internal 100MBit PHY
 		 * needs to be configured and powered up before use
 		*/
-		*reg &= ~H3_EPHY_DEFAULT_MASK;
-		*reg |=  H3_EPHY_DEFAULT_VALUE;
-		*reg |= priv->phyaddr << H3_EPHY_ADDR_SHIFT;
-		*reg &= ~H3_EPHY_SHUTDOWN;
-		*reg |= H3_EPHY_SELECT;
-	} else
-		/* This is to select External Gigabit PHY on
-		 * the boards with H3 SoC.
-		*/
-		*reg &= ~H3_EPHY_SELECT;
+		reg &= ~H3_EPHY_DEFAULT_MASK;
+		reg |=  H3_EPHY_DEFAULT_VALUE;
+		reg |= priv->phyaddr << H3_EPHY_ADDR_SHIFT;
+		reg &= ~H3_EPHY_SHUTDOWN;
+		return reg | H3_EPHY_SELECT;
+	}
 
-	return 0;
+	/* This is to select External Gigabit PHY on those boards with
+	 * an internal PHY. Does not hurt on other SoCs. Linux does
+	 * it as well.
+	 */
+	return reg & ~H3_EPHY_SELECT;
 }
 
 static int sun8i_emac_set_syscon(struct sun8i_eth_pdata *pdata,
 				 struct emac_eth_dev *priv)
 {
-	int ret;
 	u32 reg;
 
 	if (priv->variant == R40_GMAC) {
@@ -336,11 +337,7 @@ static int sun8i_emac_set_syscon(struct sun8i_eth_pdata *pdata,
 
 	reg = readl(priv->sysctl_reg + 0x30);
 
-	if (priv->variant == H3_EMAC || priv->variant == H6_EMAC) {
-		ret = sun8i_emac_set_syscon_ephy(priv, &reg);
-		if (ret)
-			return ret;
-	}
+	reg = sun8i_emac_set_syscon_ephy(priv, reg);
 
 	reg &= ~(SC_ETCS_MASK | SC_EPIT);
 	if (priv->variant == H3_EMAC ||
@@ -522,10 +519,10 @@ static int sun8i_emac_eth_start(struct udevice *dev)
 
 static int parse_phy_pins(struct udevice *dev)
 {
-	struct emac_eth_dev *priv = dev_get_priv(dev);
 	int offset;
 	const char *pin_name;
 	int drive, pull = SUN4I_PINCTRL_NO_PULL, i;
+	u32 iomux;
 
 	offset = fdtdec_lookup_phandle(gd->fdt_blob, dev_of_offset(dev),
 				       "pinctrl-0");
@@ -552,6 +549,21 @@ static int parse_phy_pins(struct udevice *dev)
 	else if (fdt_get_property(gd->fdt_blob, offset, "bias-pull-down", NULL))
 		pull = SUN4I_PINCTRL_PULL_DOWN;
 
+	/*
+	 * The GPIO pinmux value is an integration choice, so depends on the
+	 * SoC, not the EMAC variant.
+	 */
+	if (IS_ENABLED(CONFIG_MACH_SUN8I_H3))
+		iomux = SUN8I_IOMUX_H3;
+	else if (IS_ENABLED(CONFIG_MACH_SUN8I_R40))
+		iomux = SUN8I_IOMUX_R40;
+	else if (IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+		iomux = SUN8I_IOMUX_H6;
+	else if (IS_ENABLED(CONFIG_MACH_SUN50I_H616))
+		iomux = SUN8I_IOMUX_H616;
+	else
+		iomux = SUN8I_IOMUX;
+
 	for (i = 0; ; i++) {
 		int pin;
 
@@ -564,12 +576,7 @@ static int parse_phy_pins(struct udevice *dev)
 		if (pin < 0)
 			continue;
 
-		if (priv->variant == H3_EMAC)
-			sunxi_gpio_set_cfgpin(pin, SUN8I_IOMUX_H3);
-		else if (priv->variant == R40_GMAC || priv->variant == H6_EMAC)
-			sunxi_gpio_set_cfgpin(pin, SUN8I_IOMUX_R40);
-		else
-			sunxi_gpio_set_cfgpin(pin, SUN8I_IOMUX);
+		sunxi_gpio_set_cfgpin(pin, iomux);
 
 		if (drive != ~0)
 			sunxi_gpio_set_drv(pin, drive);