net: phy: Add gmiitorgmii converter support

This patch adds support for gmiitorgmii converter.
This converter sits between the MAC and the external phy
MAC <==> GMII2RGMII <==> RGMII_PHY.
The ethernet driver probes this bridge and this bridge driver
probes real phy driver and invokes the real phy functionalities
as requested. This bridge just needs to be configured based on
real phy negotiated speed and duplex.

Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

4 files changed, 194 insertions, 0 deletions

diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 2a3da068c90..30bd8e76530 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -228,6 +228,13 @@ config PHY_VITESSE
 config PHY_XILINX
 	bool "Xilinx Ethernet PHYs support"
 
+config PHY_XILINX_GMII2RGMII
+	bool "Xilinx GMII to RGMII Ethernet PHYs support"
+	help
+	  This adds support for Xilinx GMII to RGMII IP core. This IP acts
+	  as bridge between MAC connected over GMII and external phy that
+	  is connected over RGMII interface.
+
 config PHY_FIXED
 	bool "Fixed-Link PHY"
 	depends on DM_ETH
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
index 555da83630f..76b6197009b 100644
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_PHY_SMSC) += smsc.o
 obj-$(CONFIG_PHY_TERANETICS) += teranetics.o
 obj-$(CONFIG_PHY_TI) += ti.o
 obj-$(CONFIG_PHY_XILINX) += xilinx_phy.o
+obj-$(CONFIG_PHY_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o
 obj-$(CONFIG_PHY_VITESSE) += vitesse.o
 obj-$(CONFIG_PHY_MSCC) += mscc.o
 obj-$(CONFIG_PHY_FIXED) += fixed.o
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 8c4043445e8..f2d17aa91a0 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -545,6 +545,9 @@ int phy_init(void)
 #ifdef CONFIG_PHY_FIXED
 	phy_fixed_init();
 #endif
+#ifdef CONFIG_PHY_XILINX_GMII2RGMII
+	phy_xilinx_gmii2rgmii_init();
+#endif
 	genphy_init();
 
 	return 0;
@@ -918,6 +921,41 @@ void phy_connect_dev(struct phy_device *phydev, struct eth_device *dev)
 	debug("%s connected to %s\n", dev->name, phydev->drv->name);
 }
 
+#ifdef CONFIG_PHY_XILINX_GMII2RGMII
+#ifdef CONFIG_DM_ETH
+static struct phy_device *phy_connect_gmii2rgmii(struct mii_dev *bus,
+						 struct udevice *dev,
+						 phy_interface_t interface)
+#else
+static struct phy_device *phy_connect_gmii2rgmii(struct mii_dev *bus,
+						 struct eth_device *dev,
+						 phy_interface_t interface)
+#endif
+{
+	struct phy_device *phydev = NULL;
+	int sn = dev_of_offset(dev);
+	int off;
+
+	while (sn > 0) {
+		off = fdt_node_offset_by_compatible(gd->fdt_blob, sn,
+						    "xlnx,gmii-to-rgmii-1.0");
+		if (off > 0) {
+			phydev = phy_device_create(bus, off,
+						   PHY_GMII2RGMII_ID, false,
+						   interface);
+			break;
+		}
+		if (off == -FDT_ERR_NOTFOUND)
+			sn = fdt_first_subnode(gd->fdt_blob, sn);
+		else
+			printf("%s: Error finding compat string:%d\n",
+			       __func__, off);
+	}
+
+	return phydev;
+}
+#endif
+
 #ifdef CONFIG_PHY_FIXED
 #ifdef CONFIG_DM_ETH
 static struct phy_device *phy_connect_fixed(struct mii_dev *bus,
@@ -964,6 +1002,10 @@ struct phy_device *phy_connect(struct mii_dev *bus, int addr,
 #ifdef CONFIG_PHY_FIXED
 	phydev = phy_connect_fixed(bus, dev, interface);
 #endif
+#ifdef CONFIG_PHY_XILINX_GMII2RGMII
+	if (!phydev)
+		phydev = phy_connect_gmii2rgmii(bus, dev, interface);
+#endif
 
 	if (!phydev)
 		phydev = phy_find_by_mask(bus, mask, interface);
diff --git a/drivers/net/phy/xilinx_gmii2rgmii.c b/drivers/net/phy/xilinx_gmii2rgmii.c
new file mode 100644
index 00000000000..8c20da26820
--- /dev/null
+++ b/drivers/net/phy/xilinx_gmii2rgmii.c
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xilinx GMII2RGMII phy driver
+ *
+ * Copyright (C) 2018 Xilinx, Inc.
+ */
+
+#include <dm.h>
+#include <phy.h>
+#include <config.h>
+#include <common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define ZYNQ_GMII2RGMII_REG		0x10
+#define ZYNQ_GMII2RGMII_SPEED_MASK	(BMCR_SPEED1000 | BMCR_SPEED100)
+
+static int xilinxgmiitorgmii_config(struct phy_device *phydev)
+{
+	struct phy_device *ext_phydev = phydev->priv;
+
+	debug("%s\n", __func__);
+	if (ext_phydev->drv->config)
+		ext_phydev->drv->config(ext_phydev);
+
+	return 0;
+}
+
+static int xilinxgmiitorgmii_extread(struct phy_device *phydev, int addr,
+				     int devaddr, int regnum)
+{
+	struct phy_device *ext_phydev = phydev->priv;
+
+	debug("%s\n", __func__);
+	if (ext_phydev->drv->readext)
+		ext_phydev->drv->readext(ext_phydev, addr, devaddr, regnum);
+
+	return 0;
+}
+
+static int xilinxgmiitorgmii_extwrite(struct phy_device *phydev, int addr,
+				      int devaddr, int regnum, u16 val)
+
+{
+	struct phy_device *ext_phydev = phydev->priv;
+
+	debug("%s\n", __func__);
+	if (ext_phydev->drv->writeext)
+		ext_phydev->drv->writeext(ext_phydev, addr, devaddr, regnum,
+					  val);
+
+	return 0;
+}
+
+static int xilinxgmiitorgmii_startup(struct phy_device *phydev)
+{
+	u16 val = 0;
+	struct phy_device *ext_phydev = phydev->priv;
+
+	debug("%s\n", __func__);
+	ext_phydev->dev = phydev->dev;
+	if (ext_phydev->drv->startup)
+		ext_phydev->drv->startup(ext_phydev);
+
+	val = phy_read(phydev, phydev->addr, ZYNQ_GMII2RGMII_REG);
+	val &= ~ZYNQ_GMII2RGMII_SPEED_MASK;
+
+	if (ext_phydev->speed == SPEED_1000)
+		val |= BMCR_SPEED1000;
+	else if (ext_phydev->speed == SPEED_100)
+		val |= BMCR_SPEED100;
+
+	phy_write(phydev, phydev->addr, ZYNQ_GMII2RGMII_REG, val |
+		  BMCR_FULLDPLX);
+
+	phydev->duplex = ext_phydev->duplex;
+	phydev->speed = ext_phydev->speed;
+	phydev->link = ext_phydev->link;
+
+	return 0;
+}
+
+static int xilinxgmiitorgmii_probe(struct phy_device *phydev)
+{
+	int ofnode = phydev->addr;
+	u32 phy_of_handle;
+	int ext_phyaddr = -1;
+	struct phy_device *ext_phydev;
+
+	debug("%s\n", __func__);
+
+	if (phydev->interface != PHY_INTERFACE_MODE_GMII) {
+		printf("Incorrect interface type\n");
+		return -EINVAL;
+	}
+
+	/*
+	 * Read the phy address again as the one we read in ethernet driver
+	 * was overwritten for the purpose of storing the ofnode
+	 */
+	phydev->addr = fdtdec_get_int(gd->fdt_blob, ofnode, "reg", -1);
+	phy_of_handle = fdtdec_lookup_phandle(gd->fdt_blob, ofnode,
+					      "phy-handle");
+	if (phy_of_handle > 0)
+		ext_phyaddr = fdtdec_get_int(gd->fdt_blob,
+					     phy_of_handle,
+					     "reg", -1);
+	ext_phydev = phy_find_by_mask(phydev->bus,
+				      1 << ext_phyaddr,
+				      PHY_INTERFACE_MODE_RGMII);
+	if (!ext_phydev) {
+		printf("%s, No external phy device found\n", __func__);
+		return -EINVAL;
+	}
+
+	ext_phydev->node = offset_to_ofnode(phy_of_handle);
+	phydev->priv = ext_phydev;
+
+	debug("%s, gmii2rgmmi:0x%x, extphy:0x%x\n", __func__, phydev->addr,
+	      ext_phyaddr);
+
+	phydev->flags |= PHY_FLAG_BROKEN_RESET;
+
+	return 0;
+}
+
+static struct phy_driver gmii2rgmii_driver = {
+	.name = "XILINX GMII2RGMII",
+	.uid = PHY_GMII2RGMII_ID,
+	.mask = 0xffffffff,
+	.features = PHY_GBIT_FEATURES,
+	.probe = xilinxgmiitorgmii_probe,
+	.config = xilinxgmiitorgmii_config,
+	.startup = xilinxgmiitorgmii_startup,
+	.writeext = xilinxgmiitorgmii_extwrite,
+	.readext = xilinxgmiitorgmii_extread,
+};
+
+int phy_xilinx_gmii2rgmii_init(void)
+{
+	phy_register(&gmii2rgmii_driver);
+
+	return 0;
+}