env: sf: add support of command env erase

Add support of opts erase for env in SPI flash;
this opts is used by command 'env erase'.

This command only fills the env offset by 0x0 (bit flip to 0) and
the saved environment becomes invalid (with bad CRC).

It doesn't erase the sector here to avoid issue when the sector
is larger than the env (i.e. embedded when
CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE).

The needed sector erase will be managed in the next "env save" command,
using the opt ".save", before to update the environment in SPI flash.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>

1 files changed, 34 insertions, 0 deletions

diff --git a/env/sf.c b/env/sf.c
index 20358f5c3f4..1c2ab9da9b9 100644
--- a/env/sf.c
+++ b/env/sf.c
@@ -28,9 +28,18 @@
 #define INITENV
 #endif
 
+#define	OFFSET_INVALID		(~(u32)0)
+
 #ifdef CONFIG_ENV_OFFSET_REDUND
+#define ENV_OFFSET_REDUND	CONFIG_ENV_OFFSET_REDUND
+
 static ulong env_offset		= CONFIG_ENV_OFFSET;
 static ulong env_new_offset	= CONFIG_ENV_OFFSET_REDUND;
+
+#else
+
+#define ENV_OFFSET_REDUND	OFFSET_INVALID
+
 #endif /* CONFIG_ENV_OFFSET_REDUND */
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -288,6 +297,30 @@ out:
 }
 #endif
 
+static int env_sf_erase(void)
+{
+	int ret;
+	env_t env;
+
+	ret = setup_flash_device();
+	if (ret)
+		return ret;
+
+	memset(&env, 0, sizeof(env_t));
+	ret = spi_flash_write(env_flash, CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, &env);
+	if (ret)
+		goto done;
+
+	if (ENV_OFFSET_REDUND != OFFSET_INVALID)
+		ret = spi_flash_write(env_flash, ENV_OFFSET_REDUND, CONFIG_ENV_SIZE, &env);
+
+done:
+	spi_flash_free(env_flash);
+	env_flash = NULL;
+
+	return ret;
+}
+
 #if CONFIG_ENV_ADDR != 0x0
 __weak void *env_sf_get_env_addr(void)
 {
@@ -415,5 +448,6 @@ U_BOOT_ENV_LOCATION(sf) = {
 	ENV_NAME("SPIFlash")
 	.load		= env_sf_load,
 	.save		= ENV_SAVE_PTR(env_sf_save),
+	.erase		= ENV_ERASE_PTR(env_sf_erase),
 	.init		= env_sf_init,
 };