diff options
| author | Walter Schweizer | 2016-10-06 23:29:56 +0200 |
|---|---|---|
| committer | Stefan Roese | 2016-10-09 10:55:32 +0200 |
| commit | a0a868b20b7e3a8bc331f32720516d0ba85d7df8 (patch) | |
| tree | bb4aacccd09a3b3d509d1b50be710ef650311125 /include/configs/ds109.h | |
| parent | f5fd45ff64e28a73499548358e3d1ceda0de7daf (diff) | |
arm: kirkwood: add support for Synology DS109 board
Synology DS109 is based on MV88F6281. The code
is based on Dreamplug code with modificatons
from Synologys open source repository.
Signed-off-by: Walter Schweizer <swwa@users.sourceforge.net>
Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'include/configs/ds109.h')
| -rw-r--r-- | include/configs/ds109.h | 103 |
1 files changed, 103 insertions, 0 deletions
diff --git a/include/configs/ds109.h b/include/configs/ds109.h new file mode 100644 index 00000000000..222a510034e --- /dev/null +++ b/include/configs/ds109.h @@ -0,0 +1,103 @@ +/* + * (C) Copyright 2011 + * Jason Cooper <u-boot@lakedaemon.net> + * + * Based on work by: + * Marvell Semiconductor <www.marvell.com> + * Written-by: Siddarth Gore <gores@marvell.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_DS109_H +#define _CONFIG_DS109_H + +/* + * FIXME: This belongs in mach-types.h. However, we only pull mach-types + * from Linus' kernel.org tree. This hasn't been updated primarily due to + * the recent arch/arm reshuffling. So, in the meantime, we'll place it + * here. + */ +#include <asm/mach-types.h> +#ifdef MACH_TYPE_SYNOLOGY +#error "MACH_TYPE_SYNOLOGY has been defined properly, please remove this." +#else +#define MACH_TYPE_SYNOLOGY 527 +#endif + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */ +#define CONFIG_MACH_TYPE MACH_TYPE_SYNOLOGY + +/* + * Commands configuration + */ +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT + +/* + * mv-plug-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-plug-common.h" + +/* + * Environment variables configurations + */ +#ifdef CONFIG_SPI_FLASH +#define CONFIG_ENV_IS_IN_SPI_FLASH 1 +#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */ +#else +#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ +#endif + +#ifdef CONFIG_CMD_SF +#define CONFIG_HARD_SPI 1 +#define CONFIG_KIRKWOOD_SPI 1 +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */ +#endif + +/* + * max 4k env size is enough, but in case of nand + * it has to be rounded to sector size + */ +#define CONFIG_ENV_SIZE 0x10000 +#define CONFIG_ENV_ADDR 0x3d0000 +#define CONFIG_ENV_OFFSET 0x3d0000 /* env starts here */ + +/* + * Default environment variables + */ +#define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \ + "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\ + "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \ + "bootm 0x6400000;" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "x_bootcmd_ethernet=ping 192.168.1.2\0" \ + "x_bootcmd_usb=usb start\0" \ + "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \ + "x_bootargs=console=ttyS0,115200\0" \ + "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" \ + "ipaddr=192.168.1.5\0" + +/* + * Ethernet Driver configuration + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_MVGBE_PORTS {1, 0} /* enable one port */ +#define CONFIG_PHY_BASE_ADR 8 +#endif /* CONFIG_CMD_NET */ + +/* + * SATA Driver configuration + */ +#ifdef CONFIG_MVSATA_IDE +#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET +#endif /*CONFIG_MVSATA_IDE*/ + +#endif /* _CONFIG_DS109_H */ |