mtd: remove SPEAr flash driver st_smi

Remove the driver st_smic.c used in SPEAr products and the associated
config CONFIG_ST_SMI; this driver is no more used in U-Boot after the
commit 570c3dcfc153 ("arm: Remove spear600 boards and the rest of SPEAr
support").

Fixes: 570c3dcfc153 ("arm: Remove spear600 boards and the rest of SPEAr support")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>

1 files changed, 0 insertions, 100 deletions

diff --git a/include/linux/mtd/st_smi.h b/include/linux/mtd/st_smi.h
deleted file mode 100644
index 60589697870..00000000000
--- a/include/linux/mtd/st_smi.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2009
- * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
- */
-
-#ifndef ST_SMI_H
-#define ST_SMI_H
-
-/* 0xF800.0000 . 0xFBFF.FFFF	64MB	SMI (Serial Flash Mem) */
-/* 0xFC00.0000 . 0xFC1F.FFFF	2MB	SMI (Serial Flash Reg.) */
-
-#define FLASH_START_ADDRESS	CONFIG_SYS_FLASH_BASE
-#define FLASH_BANK_SIZE		CONFIG_SYS_FLASH_BANK_SIZE
-
-#define SMIBANK0_BASE		(FLASH_START_ADDRESS)
-#define SMIBANK1_BASE		(SMIBANK0_BASE + FLASH_BANK_SIZE)
-#define SMIBANK2_BASE		(SMIBANK1_BASE + FLASH_BANK_SIZE)
-#define SMIBANK3_BASE		(SMIBANK2_BASE + FLASH_BANK_SIZE)
-
-#define BANK0			0
-#define BANK1			1
-#define BANK2			2
-#define BANK3			3
-
-struct smi_regs {
-	u32 smi_cr1;
-	u32 smi_cr2;
-	u32 smi_sr;
-	u32 smi_tr;
-	u32 smi_rr;
-};
-
-/* CONTROL REG 1 */
-#define BANK_EN			0x0000000F	/* enables all banks */
-#define DSEL_TIME		0x00000060	/* Deselect time */
-#define PRESCAL5		0x00000500	/* AHB_CK prescaling value */
-#define PRESCALA		0x00000A00	/* AHB_CK prescaling value */
-#define PRESCAL3		0x00000300	/* AHB_CK prescaling value */
-#define PRESCAL4		0x00000400	/* AHB_CK prescaling value */
-#define SW_MODE			0x10000000	/* enables SW Mode */
-#define WB_MODE			0x20000000	/* Write Burst Mode */
-#define FAST_MODE		0x00008000	/* Fast Mode */
-#define HOLD1			0x00010000
-
-/* CONTROL REG 2 */
-#define RD_STATUS_REG		0x00000400	/* reads status reg */
-#define WE			0x00000800	/* Write Enable */
-#define BANK0_SEL		0x00000000	/* Select Banck0 */
-#define BANK1_SEL		0x00001000	/* Select Banck1 */
-#define BANK2_SEL		0x00002000	/* Select Banck2 */
-#define BANK3_SEL		0x00003000	/* Select Banck3 */
-#define BANKSEL_SHIFT		12
-#define SEND			0x00000080	/* Send data */
-#define TX_LEN_1		0x00000001	/* data length = 1 byte */
-#define TX_LEN_2		0x00000002	/* data length = 2 byte */
-#define TX_LEN_3		0x00000003	/* data length = 3 byte */
-#define TX_LEN_4		0x00000004	/* data length = 4 byte */
-#define RX_LEN_1		0x00000010	/* data length = 1 byte */
-#define RX_LEN_2		0x00000020	/* data length = 2 byte */
-#define RX_LEN_3		0x00000030	/* data length = 3 byte */
-#define RX_LEN_4		0x00000040	/* data length = 4 byte */
-#define TFIE			0x00000100	/* Tx Flag Interrupt Enable */
-#define WCIE			0x00000200	/* WCF Interrupt Enable */
-
-/* STATUS_REG */
-#define INT_WCF_CLR		0xFFFFFDFF	/* clear: WCF clear */
-#define INT_TFF_CLR		0xFFFFFEFF	/* clear: TFF clear */
-#define WIP_BIT			0x00000001	/* WIP Bit of SPI SR */
-#define WEL_BIT			0x00000002	/* WEL Bit of SPI SR */
-#define RSR			0x00000005	/* Read Status regiser */
-#define TFF			0x00000100	/* Transfer Finished FLag */
-#define WCF			0x00000200	/* Transfer Finished FLag */
-#define ERF1			0x00000400	/* Error Flag 1 */
-#define ERF2			0x00000800	/* Error Flag 2 */
-#define WM0			0x00001000	/* WM Bank 0 */
-#define WM1			0x00002000	/* WM Bank 1 */
-#define WM2			0x00004000	/* WM Bank 2 */
-#define WM3			0x00008000	/* WM Bank 3 */
-#define WM_SHIFT		12
-
-/* TR REG */
-#define READ_ID			0x0000009F	/* Read Identification */
-#define BULK_ERASE		0x000000C7	/* BULK erase */
-#define SECTOR_ERASE		0x000000D8	/* SECTOR erase */
-#define WRITE_ENABLE		0x00000006	/* Wenable command to FLASH */
-
-struct flash_dev {
-	u32 density;
-	ulong size;
-	ushort sector_count;
-};
-
-#define SFLASH_PAGE_SIZE	0x100	/* flash page size */
-#define XFER_FINISH_TOUT	15	/* xfer finish timeout(in ms) */
-#define WMODE_TOUT		15	/* write enable timeout(in ms) */
-
-extern void smi_init(void);
-
-#endif