Merge branch 'master' of git://git.denx.de/u-boot-nand-flash

7 files changed, 329 insertions, 165 deletions

diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index 8b13b107e28..69412e461e8 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -316,7 +316,6 @@
 #define CONFIG_SYS_HUSH_PARSER
 
 /* Video */
-#define CONFIG_FSL_DIU_FB
 
 #ifdef CONFIG_FSL_DIU_FB
 #define CONFIG_SYS_DIU_ADDR	(CONFIG_SYS_CCSRBAR + 0x10000)
@@ -336,7 +335,6 @@
 #endif
 
 #ifndef CONFIG_FSL_DIU_FB
-#define CONFIG_ATI
 #endif
 
 #ifdef CONFIG_ATI
diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h
index 8cbcdae1143..71292b1a86b 100644
--- a/include/linux/mtd/bbm.h
+++ b/include/linux/mtd/bbm.h
@@ -81,32 +81,53 @@ struct nand_bbt_descr {
 #define NAND_BBT_LASTBLOCK	0x00000010
 /* The bbt is at the given page, else we must scan for the bbt */
 #define NAND_BBT_ABSPAGE	0x00000020
-/* The bbt is at the given page, else we must scan for the bbt */
-#define NAND_BBT_SEARCH		0x00000040
 /* bbt is stored per chip on multichip devices */
 #define NAND_BBT_PERCHIP	0x00000080
 /* bbt has a version counter at offset veroffs */
 #define NAND_BBT_VERSION	0x00000100
 /* Create a bbt if none exists */
 #define NAND_BBT_CREATE		0x00000200
+/*
+ * Create an empty BBT with no vendor information. Vendor's information may be
+ * unavailable, for example, if the NAND controller has a different data and OOB
+ * layout or if this information is already purged. Must be used in conjunction
+ * with NAND_BBT_CREATE.
+ */
+#define NAND_BBT_CREATE_EMPTY	0x00000400
 /* Search good / bad pattern through all pages of a block */
-#define NAND_BBT_SCANALLPAGES	0x00000400
+#define NAND_BBT_SCANALLPAGES	0x00000800
 /* Scan block empty during good / bad block scan */
-#define NAND_BBT_SCANEMPTY	0x00000800
+#define NAND_BBT_SCANEMPTY	0x00001000
 /* Write bbt if neccecary */
-#define NAND_BBT_WRITE		0x00001000
+#define NAND_BBT_WRITE		0x00002000
 /* Read and write back block contents when writing bbt */
-#define NAND_BBT_SAVECONTENT	0x00002000
+#define NAND_BBT_SAVECONTENT	0x00004000
 /* Search good / bad pattern on the first and the second page */
-#define NAND_BBT_SCAN2NDPAGE	0x00004000
+#define NAND_BBT_SCAN2NDPAGE	0x00008000
 /* Search good / bad pattern on the last page of the eraseblock */
-#define NAND_BBT_SCANLASTPAGE	0x00008000
-/* Chip stores bad block marker on BOTH 1st and 6th bytes of OOB */
-#define NAND_BBT_SCANBYTE1AND6 0x00100000
-/* The nand_bbt_descr was created dynamicaly and must be freed */
-#define NAND_BBT_DYNAMICSTRUCT 0x00200000
-/* The bad block table does not OOB for marker */
-#define NAND_BBT_NO_OOB		0x00400000
+#define NAND_BBT_SCANLASTPAGE	0x00010000
+/*
+ * Use a flash based bad block table. By default, OOB identifier is saved in
+ * OOB area. This option is passed to the default bad block table function.
+ */
+#define NAND_BBT_USE_FLASH	0x00020000
+/*
+ * Do not store flash based bad block table marker in the OOB area; store it
+ * in-band.
+ */
+#define NAND_BBT_NO_OOB		0x00040000
+/*
+ * Do not write new bad block markers to OOB; useful, e.g., when ECC covers
+ * entire spare area. Must be used with NAND_BBT_USE_FLASH.
+ */
+#define NAND_BBT_NO_OOB_BBM	0x00080000
+
+/*
+ * Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr
+ * was allocated dynamicaly and must be freed in nand_release(). Has no meaning
+ * in nand_chip.bbt_options.
+ */
+#define NAND_BBT_DYNAMICSTRUCT	0x80000000
 
 /* The maximum number of blocks to scan for a bbt */
 #define NAND_BBT_SCAN_MAXBLOCKS	4
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 141c96024c5..6f44abdc161 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -9,7 +9,8 @@
 
 #include <linux/types.h>
 #include <div64.h>
-#include <linux/mtd/mtd-abi.h>
+#include <mtd/mtd-abi.h>
+#include <asm/errno.h>
 
 #define MTD_CHAR_MAJOR 90
 #define MTD_BLOCK_MAJOR 31
@@ -65,22 +66,6 @@ struct mtd_erase_region_info {
 	unsigned long *lockmap;		/* If keeping bitmap of locks */
 };
 
-/*
- * oob operation modes
- *
- * MTD_OOB_PLACE:	oob data are placed at the given offset
- * MTD_OOB_AUTO:	oob data are automatically placed at the free areas
- *			which are defined by the ecclayout
- * MTD_OOB_RAW:		mode to read raw data+oob in one chunk. The oob data
- *			is inserted into the data. Thats a raw image of the
- *			flash contents.
- */
-typedef enum {
-	MTD_OOB_PLACE,
-	MTD_OOB_AUTO,
-	MTD_OOB_RAW,
-} mtd_oob_mode_t;
-
 /**
  * struct mtd_oob_ops - oob operation operands
  * @mode:	operation mode
@@ -92,7 +77,7 @@ typedef enum {
  * @ooblen:	number of oob bytes to write/read
  * @oobretlen:	number of oob bytes written/read
  * @ooboffs:	offset of oob data in the oob area (only relevant when
- *		mode = MTD_OOB_PLACE)
+ *		mode = MTD_OPS_PLACE_OOB or MTD_OPS_RAW)
  * @datbuf:	data buffer - if NULL only oob data are read/written
  * @oobbuf:	oob data buffer
  *
@@ -101,7 +86,7 @@ typedef enum {
  * OOB area.
  */
 struct mtd_oob_ops {
-	mtd_oob_mode_t	mode;
+	unsigned int	mode;
 	size_t		len;
 	size_t		retlen;
 	size_t		ooblen;
@@ -133,13 +118,25 @@ struct mtd_info {
 	u_int32_t oobsize;   /* Amount of OOB data per block (e.g. 16) */
 	u_int32_t oobavail;  /* Available OOB bytes per block */
 
+	/*
+	 * read ops return -EUCLEAN if max number of bitflips corrected on any
+	 * one region comprising an ecc step equals or exceeds this value.
+	 * Settable by driver, else defaults to ecc_strength.  User can override
+	 * in sysfs.  N.B. The meaning of the -EUCLEAN return code has changed;
+	 * see Documentation/ABI/testing/sysfs-class-mtd for more detail.
+	 */
+	unsigned int bitflip_threshold;
+
 	/* Kernel-only stuff starts here. */
 	const char *name;
 	int index;
 
-	/* ecc layout structure pointer - read only ! */
+	/* ECC layout structure pointer - read only! */
 	struct nand_ecclayout *ecclayout;
 
+	/* max number of correctible bit errors per ecc step */
+	unsigned int ecc_strength;
+
 	/* Data for variable erase regions. If numeraseregions is zero,
 	 * it means that the whole device has erasesize as given above.
 	 */
@@ -147,25 +144,17 @@ struct mtd_info {
 	struct mtd_erase_region_info *eraseregions;
 
 	/*
-	 * Erase is an asynchronous operation.  Device drivers are supposed
-	 * to call instr->callback() whenever the operation completes, even
-	 * if it completes with a failure.
-	 * Callers are supposed to pass a callback function and wait for it
-	 * to be called before writing to the block.
+	 * Do not call via these pointers, use corresponding mtd_*()
+	 * wrappers instead.
 	 */
-	int (*erase) (struct mtd_info *mtd, struct erase_info *instr);
-
-	/* This stuff for eXecute-In-Place */
-	/* phys is optional and may be set to NULL */
-	int (*point) (struct mtd_info *mtd, loff_t from, size_t len,
+	int (*_erase) (struct mtd_info *mtd, struct erase_info *instr);
+	int (*_point) (struct mtd_info *mtd, loff_t from, size_t len,
 			size_t *retlen, void **virt, phys_addr_t *phys);
-
-	/* We probably shouldn't allow XIP if the unpoint isn't a NULL */
-	void (*unpoint) (struct mtd_info *mtd, loff_t from, size_t len);
-
-
-	int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
-	int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
+	void (*_unpoint) (struct mtd_info *mtd, loff_t from, size_t len);
+	int (*_read) (struct mtd_info *mtd, loff_t from, size_t len,
+		     size_t *retlen, u_char *buf);
+	int (*_write) (struct mtd_info *mtd, loff_t to, size_t len,
+		      size_t *retlen, const u_char *buf);
 
 	/* In blackbox flight recorder like scenarios we want to make successful
 	   writes in interrupt context. panic_write() is only intended to be
@@ -174,24 +163,35 @@ struct mtd_info {
 	   longer, this function can break locks and delay to ensure the write
 	   succeeds (but not sleep). */
 
-	int (*panic_write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
+	int (*_panic_write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
 
-	int (*read_oob) (struct mtd_info *mtd, loff_t from,
+	int (*_read_oob) (struct mtd_info *mtd, loff_t from,
 			 struct mtd_oob_ops *ops);
-	int (*write_oob) (struct mtd_info *mtd, loff_t to,
+	int (*_write_oob) (struct mtd_info *mtd, loff_t to,
 			 struct mtd_oob_ops *ops);
-
+	int (*_get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf,
+				   size_t len);
+	int (*_read_fact_prot_reg) (struct mtd_info *mtd, loff_t from,
+				   size_t len, size_t *retlen, u_char *buf);
+	int (*_get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf,
+				   size_t len);
+	int (*_read_user_prot_reg) (struct mtd_info *mtd, loff_t from,
+				   size_t len, size_t *retlen, u_char *buf);
+	int (*_write_user_prot_reg) (struct mtd_info *mtd, loff_t to, size_t len,
+				    size_t *retlen, u_char *buf);
+	int (*_lock_user_prot_reg) (struct mtd_info *mtd, loff_t from,
+				   size_t len);
+	void (*_sync) (struct mtd_info *mtd);
+	int (*_lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
+	int (*_unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
+	int (*_block_isbad) (struct mtd_info *mtd, loff_t ofs);
+	int (*_block_markbad) (struct mtd_info *mtd, loff_t ofs);
 	/*
-	 * Methods to access the protection register area, present in some
-	 * flash devices. The user data is one time programmable but the
-	 * factory data is read only.
+	 * If the driver is something smart, like UBI, it may need to maintain
+	 * its own reference counting. The below functions are only for driver.
 	 */
-	int (*get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len);
-	int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
-	int (*get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf, size_t len);
-	int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
-	int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
-	int (*lock_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len);
+	int (*_get_device) (struct mtd_info *mtd);
+	void (*_put_device) (struct mtd_info *mtd);
 
 /* XXX U-BOOT XXX */
 #if 0
@@ -201,18 +201,6 @@ struct mtd_info {
 	*/
 	int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen);
 #endif
-
-	/* Sync */
-	void (*sync) (struct mtd_info *mtd);
-
-	/* Chip-supported device locking */
-	int (*lock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
-	int (*unlock) (struct mtd_info *mtd, loff_t ofs, uint64_t len);
-
-	/* Bad block management functions */
-	int (*block_isbad) (struct mtd_info *mtd, loff_t ofs);
-	int (*block_markbad) (struct mtd_info *mtd, loff_t ofs);
-
 /* XXX U-BOOT XXX */
 #if 0
 	struct notifier_block reboot_notifier;  /* default mode before reboot */
@@ -227,15 +215,59 @@ struct mtd_info {
 
 	struct module *owner;
 	int usecount;
-
-	/* If the driver is something smart, like UBI, it may need to maintain
-	 * its own reference counting. The below functions are only for driver.
-	 * The driver may register its callbacks. These callbacks are not
-	 * supposed to be called by MTD users */
-	int (*get_device) (struct mtd_info *mtd);
-	void (*put_device) (struct mtd_info *mtd);
 };
 
+int mtd_erase(struct mtd_info *mtd, struct erase_info *instr);
+int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
+	     u_char *buf);
+int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
+	      const u_char *buf);
+int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
+		    const u_char *buf);
+
+int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops);
+
+static inline int mtd_write_oob(struct mtd_info *mtd, loff_t to,
+				struct mtd_oob_ops *ops)
+{
+	ops->retlen = ops->oobretlen = 0;
+	if (!mtd->_write_oob)
+		return -EOPNOTSUPP;
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+	return mtd->_write_oob(mtd, to, ops);
+}
+
+int mtd_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf,
+			   size_t len);
+int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
+			   size_t *retlen, u_char *buf);
+int mtd_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf,
+			   size_t len);
+int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
+			   size_t *retlen, u_char *buf);
+int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len,
+			    size_t *retlen, u_char *buf);
+int mtd_lock_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len);
+
+/* XXX U-BOOT XXX */
+#if 0
+int mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
+	       unsigned long count, loff_t to, size_t *retlen);
+#endif
+
+static inline void mtd_sync(struct mtd_info *mtd)
+{
+	if (mtd->_sync)
+		mtd->_sync(mtd);
+}
+
+int mtd_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+int mtd_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len);
+int mtd_block_isbad(struct mtd_info *mtd, loff_t ofs);
+int mtd_block_markbad(struct mtd_info *mtd, loff_t ofs);
+
 static inline uint32_t mtd_div_by_eb(uint64_t sz, struct mtd_info *mtd)
 {
 	do_div(sz, mtd->erasesize);
@@ -247,6 +279,16 @@ static inline uint32_t mtd_mod_by_eb(uint64_t sz, struct mtd_info *mtd)
 	return do_div(sz, mtd->erasesize);
 }
 
+static inline int mtd_has_oob(const struct mtd_info *mtd)
+{
+	return mtd->_read_oob && mtd->_write_oob;
+}
+
+static inline int mtd_can_have_bb(const struct mtd_info *mtd)
+{
+	return !!mtd->_block_isbad;
+}
+
 	/* Kernel-side ioctl definitions */
 
 extern int add_mtd_device(struct mtd_info *mtd);
@@ -269,12 +311,6 @@ struct mtd_notifier {
 
 extern void register_mtd_user (struct mtd_notifier *new);
 extern int unregister_mtd_user (struct mtd_notifier *old);
-
-int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs,
-		       unsigned long count, loff_t to, size_t *retlen);
-
-int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs,
-		      unsigned long count, loff_t from, size_t *retlen);
 #endif
 
 #ifdef CONFIG_MTD_PARTITIONS
@@ -296,17 +332,34 @@ static inline void mtd_erase_callback(struct erase_info *instr)
 #define MTD_DEBUG_LEVEL3	(3)	/* Noisy   */
 
 #ifdef CONFIG_MTD_DEBUG
+#define pr_debug(args...)	MTDDEBUG(MTD_DEBUG_LEVEL0, args)
 #define MTDDEBUG(n, args...)				\
 	do {						\
 		if (n <= CONFIG_MTD_DEBUG_VERBOSE)	\
 			printk(KERN_INFO args);		\
 	} while(0)
 #else /* CONFIG_MTD_DEBUG */
+#define pr_debug(args...)
 #define MTDDEBUG(n, args...)				\
 	do {						\
 		if (0)					\
 			printk(KERN_INFO args);		\
 	} while(0)
 #endif /* CONFIG_MTD_DEBUG */
+#define pr_info(args...)	MTDDEBUG(MTD_DEBUG_LEVEL0, args)
+#define pr_warn(args...)	MTDDEBUG(MTD_DEBUG_LEVEL0, args)
+#define pr_err(args...)		MTDDEBUG(MTD_DEBUG_LEVEL0, args)
+
+static inline int mtd_is_bitflip(int err) {
+	return err == -EUCLEAN;
+}
+
+static inline int mtd_is_eccerr(int err) {
+	return err == -EBADMSG;
+}
+
+static inline int mtd_is_bitflip_or_eccerr(int err) {
+	return mtd_is_bitflip(err) || mtd_is_eccerr(err);
+}
 
 #endif /* __MTD_MTD_H__ */
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 98bf255bb28..2055584374d 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -46,7 +46,7 @@ extern void nand_wait_ready(struct mtd_info *mtd);
  * is supported now. If you add a chip with bigger oobsize/page
  * adjust this accordingly.
  */
-#define NAND_MAX_OOBSIZE	576
+#define NAND_MAX_OOBSIZE	640
 #define NAND_MAX_PAGESIZE	8192
 
 /*
@@ -82,6 +82,8 @@ extern void nand_wait_ready(struct mtd_info *mtd);
 #define NAND_CMD_READID		0x90
 #define NAND_CMD_ERASE2		0xd0
 #define NAND_CMD_PARAM		0xec
+#define NAND_CMD_GET_FEATURES	0xee
+#define NAND_CMD_SET_FEATURES	0xef
 #define NAND_CMD_RESET		0xff
 
 #define NAND_CMD_LOCK		0x2a
@@ -142,7 +144,7 @@ typedef enum {
 #define NAND_ECC_READ		0
 /* Reset Hardware ECC for write */
 #define NAND_ECC_WRITE		1
-/* Enable Hardware ECC before syndrom is read back from flash */
+/* Enable Hardware ECC before syndrome is read back from flash */
 #define NAND_ECC_READSYN	2
 
 /* Bit mask for flags passed to do_nand_read_ecc */
@@ -153,9 +155,7 @@ typedef enum {
  * Option constants for bizarre disfunctionality and real
  * features.
  */
-/* Chip can not auto increment pages */
-#define NAND_NO_AUTOINCR	0x00000001
-/* Buswitdh is 16 bit */
+/* Buswidth is 16 bit */
 #define NAND_BUSWIDTH_16	0x00000002
 /* Device supports partial programming without padding */
 #define NAND_NO_PADDING		0x00000004
@@ -179,12 +179,6 @@ typedef enum {
  * This happens with the Renesas AG-AND chips, possibly others.
  */
 #define BBT_AUTO_REFRESH	0x00000080
-/*
- * Chip does not require ready check on read. true
- * for all large page devices, as they do not support
- * autoincrement.
- */
-#define NAND_NO_READRDY		0x00000100
 /* Chip does not allow subpage writes */
 #define NAND_NO_SUBPAGE_WRITE	0x00000200
 
@@ -202,34 +196,21 @@ typedef enum {
 	(NAND_NO_PADDING | NAND_CACHEPRG | NAND_COPYBACK)
 
 /* Macros to identify the above */
-#define NAND_CANAUTOINCR(chip) (!(chip->options & NAND_NO_AUTOINCR))
 #define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING))
 #define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG))
 #define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK))
 #define NAND_HAS_SUBPAGE_READ(chip) ((chip->options & NAND_SUBPAGE_READ))
 
 /* Non chip related options */
-/*
- * Use a flash based bad block table. OOB identifier is saved in OOB area.
- * This option is passed to the default bad block table function.
- */
-#define NAND_USE_FLASH_BBT	0x00010000
 /* This option skips the bbt scan during initialization. */
-#define NAND_SKIP_BBTSCAN	0x00020000
+#define NAND_SKIP_BBTSCAN	0x00010000
 /*
  * This option is defined if the board driver allocates its own buffers
  * (e.g. because it needs them DMA-coherent).
  */
-#define NAND_OWN_BUFFERS	0x00040000
+#define NAND_OWN_BUFFERS	0x00020000
 /* Chip may not exist, so silence any errors in scan */
-#define NAND_SCAN_SILENT_NODEV	0x00080000
-/*
- * If passed additionally to NAND_USE_FLASH_BBT then BBT code will not touch
- * the OOB area.
- */
-#define NAND_USE_FLASH_BBT_NO_OOB	0x00800000
-/* Create an empty BBT with no vendor information if the BBT is available */
-#define NAND_CREATE_EMPTY_BBT		0x01000000
+#define NAND_SCAN_SILENT_NODEV	0x00040000
 
 /* Options set by nand scan */
 /* bbt has already been read */
@@ -244,6 +225,21 @@ typedef enum {
 /* Keep gcc happy */
 struct nand_chip;
 
+/* ONFI timing mode, used in both asynchronous and synchronous mode */
+#define ONFI_TIMING_MODE_0		(1 << 0)
+#define ONFI_TIMING_MODE_1		(1 << 1)
+#define ONFI_TIMING_MODE_2		(1 << 2)
+#define ONFI_TIMING_MODE_3		(1 << 3)
+#define ONFI_TIMING_MODE_4		(1 << 4)
+#define ONFI_TIMING_MODE_5		(1 << 5)
+#define ONFI_TIMING_MODE_UNKNOWN	(1 << 6)
+
+/* ONFI feature address */
+#define ONFI_FEATURE_ADDR_TIMING_MODE	0x1
+
+/* ONFI subfeature parameters length */
+#define ONFI_SUBFEATURE_PARAM_LEN	4
+
 struct nand_onfi_params {
 	/* rev info and features block */
 	/* 'O' 'N' 'F' 'I'  */
@@ -326,27 +322,32 @@ struct nand_hw_control {
 };
 
 /**
- * struct nand_ecc_ctrl - Control structure for ecc
- * @mode:	ecc mode
- * @steps:	number of ecc steps per page
- * @size:	data bytes per ecc step
- * @bytes:	ecc bytes per step
- * @total:	total number of ecc bytes per page
- * @prepad:	padding information for syndrome based ecc generators
- * @postpad:	padding information for syndrome based ecc generators
+ * struct nand_ecc_ctrl - Control structure for ECC
+ * @mode:	ECC mode
+ * @steps:	number of ECC steps per page
+ * @size:	data bytes per ECC step
+ * @bytes:	ECC bytes per step
+ * @strength:	max number of correctible bits per ECC step
+ * @total:	total number of ECC bytes per page
+ * @prepad:	padding information for syndrome based ECC generators
+ * @postpad:	padding information for syndrome based ECC generators
  * @layout:	ECC layout control struct pointer
- * @priv:	pointer to private ecc control data
- * @hwctl:	function to control hardware ecc generator. Must only
+ * @priv:	pointer to private ECC control data
+ * @hwctl:	function to control hardware ECC generator. Must only
  *		be provided if an hardware ECC is available
- * @calculate:	function for ecc calculation or readback from ecc hardware
- * @correct:	function for ecc correction, matching to ecc generator (sw/hw)
+ * @calculate:	function for ECC calculation or readback from ECC hardware
+ * @correct:	function for ECC correction, matching to ECC generator (sw/hw)
  * @read_page_raw:	function to read a raw page without ECC
  * @write_page_raw:	function to write a raw page without ECC
- * @read_page:	function to read a page according to the ecc generator
- *		requirements.
- * @read_subpage:	function to read parts of the page covered by ECC.
- * @write_page:	function to write a page according to the ecc generator
+ * @read_page:	function to read a page according to the ECC generator
+ *		requirements; returns maximum number of bitflips corrected in
+ *		any single ECC step, 0 if bitflips uncorrectable, -EIO hw error
+ * @read_subpage:	function to read parts of the page covered by ECC;
+ *			returns same as read_page()
+ * @write_page:	function to write a page according to the ECC generator
  *		requirements.
+ * @write_oob_raw:	function to write chip OOB data without ECC
+ * @read_oob_raw:	function to read chip OOB data without ECC
  * @read_oob:	function to read chip OOB data
  * @write_oob:	function to write chip OOB data
  */
@@ -356,6 +357,7 @@ struct nand_ecc_ctrl {
 	int size;
 	int bytes;
 	int total;
+	int strength;
 	int prepad;
 	int postpad;
 	struct nand_ecclayout	*layout;
@@ -366,25 +368,28 @@ struct nand_ecc_ctrl {
 	int (*correct)(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc,
 			uint8_t *calc_ecc);
 	int (*read_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
-			uint8_t *buf, int page);
-	void (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
-			const uint8_t *buf);
+			uint8_t *buf, int oob_required, int page);
+	int (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+			const uint8_t *buf, int oob_required);
 	int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
-			uint8_t *buf, int page);
+			uint8_t *buf, int oob_required, int page);
 	int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
 			uint32_t offs, uint32_t len, uint8_t *buf);
-	void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
-			const uint8_t *buf);
-	int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page,
-			int sndcmd);
+	int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
+			const uint8_t *buf, int oob_required);
+	int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+			int page);
+	int (*read_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
+			int page);
+	int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page);
 	int (*write_oob)(struct mtd_info *mtd, struct nand_chip *chip,
 			int page);
 };
 
 /**
  * struct nand_buffers - buffer structure for read/write
- * @ecccalc:	buffer for calculated ecc
- * @ecccode:	buffer for ecc read from flash
+ * @ecccalc:	buffer for calculated ECC
+ * @ecccode:	buffer for ECC read from flash
  * @databuf:	buffer for data - dynamically sized
  *
  * Do not change the order of buffers. databuf and oobrbuf must be in
@@ -418,7 +423,7 @@ struct nand_buffers {
  *			mtd->oobsize, mtd->writesize and so on.
  *			@id_data contains the 8 bytes values of NAND_CMD_READID.
  *			Return with the bus width.
- * @dev_ready:		[BOARDSPECIFIC] hardwarespecific function for accesing
+ * @dev_ready:		[BOARDSPECIFIC] hardwarespecific function for accessing
  *			device ready/busy line. If set to NULL no access to
  *			ready/busy is available and the ready/busy information
  *			is read from the chip status register.
@@ -426,17 +431,17 @@ struct nand_buffers {
  *			commands to the chip.
  * @waitfunc:		[REPLACEABLE] hardwarespecific function for wait on
  *			ready.
- * @ecc:		[BOARDSPECIFIC] ecc control ctructure
+ * @ecc:		[BOARDSPECIFIC] ECC control structure
  * @buffers:		buffer structure for read/write
  * @hwcontrol:		platform-specific hardware control structure
- * @ops:		oob operation operands
  * @erase_cmd:		[INTERN] erase command write function, selectable due
  *			to AND support.
  * @scan_bbt:		[REPLACEABLE] function to scan bad block table
  * @chip_delay:		[BOARDSPECIFIC] chip dependent delay for transferring
  *			data from array to read regs (tR).
  * @state:		[INTERN] the current state of the NAND device
- * @oob_poi:		poison value buffer
+ * @oob_poi:		"poison value buffer," used for laying out OOB data
+ *			before writing
  * @page_shift:		[INTERN] number of address bits in a page (column
  *			address bits).
  * @phys_erase_shift:	[INTERN] number of address bits in a physical eraseblock
@@ -445,10 +450,14 @@ struct nand_buffers {
  * @options:		[BOARDSPECIFIC] various chip options. They can partly
  *			be set to inform nand_scan about special functionality.
  *			See the defines for further explanation.
+ * @bbt_options:	[INTERN] bad block specific options. All options used
+ *			here must come from bbm.h. By default, these options
+ *			will be copied to the appropriate nand_bbt_descr's.
  * @badblockpos:	[INTERN] position of the bad block marker in the oob
  *			area.
- * @badblockbits:	[INTERN] number of bits to left-shift the bad block
- *			number
+ * @badblockbits:	[INTERN] minimum number of set bits in a good block's
+ *			bad block marker position; i.e., BBM == 11110111b is
+ *			not bad when badblockbits == 7
  * @cellinfo:		[INTERN] MLC/multichip data from chip ident
  * @numchips:		[INTERN] number of physical chips
  * @chipsize:		[INTERN] the size of one chip for multichip arrays
@@ -460,7 +469,9 @@ struct nand_buffers {
  *			non 0 if ONFI supported.
  * @onfi_params:	[INTERN] holds the ONFI page parameter when ONFI is
  *			supported, 0 otherwise.
- * @ecclayout:		[REPLACEABLE] the default ecc placement scheme
+ * @onfi_set_features	[REPLACEABLE] set the features for ONFI nand
+ * @onfi_get_features	[REPLACEABLE] get the features for ONFI nand
+ * @ecclayout:		[REPLACEABLE] the default ECC placement scheme
  * @bbt:		[INTERN] bad block table pointer
  * @bbt_td:		[REPLACEABLE] bad block table descriptor for flash
  *			lookup.
@@ -468,9 +479,9 @@ struct nand_buffers {
  * @badblock_pattern:	[REPLACEABLE] bad block scan pattern used for initial
  *			bad block scan.
  * @controller:		[REPLACEABLE] a pointer to a hardware controller
- *			structure which is shared among multiple independend
+ *			structure which is shared among multiple independent
  *			devices.
- * @priv:		[OPTIONAL] pointer to private chip date
+ * @priv:		[OPTIONAL] pointer to private chip data
  * @errstat:		[OPTIONAL] hardware specific function to perform
  *			additional error status checks (determine if errors are
  *			correctable).
@@ -501,10 +512,16 @@ struct nand_chip {
 	int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state,
 			int status, int page);
 	int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
-			const uint8_t *buf, int page, int cached, int raw);
+			const uint8_t *buf, int oob_required, int page,
+			int cached, int raw);
+	int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip,
+			int feature_addr, uint8_t *subfeature_para);
+	int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip,
+			int feature_addr, uint8_t *subfeature_para);
 
 	int chip_delay;
 	unsigned int options;
+	unsigned int bbt_options;
 
 	int page_shift;
 	int phys_erase_shift;
@@ -534,8 +551,6 @@ struct nand_chip {
 	struct nand_buffers *buffers;
 	struct nand_hw_control hwcontrol;
 
-	struct mtd_oob_ops ops;
-
 	uint8_t *bbt;
 	struct nand_bbt_descr *bbt_td;
 	struct nand_bbt_descr *bbt_md;
@@ -557,6 +572,8 @@ struct nand_chip {
 #define NAND_MFR_HYNIX		0xad
 #define NAND_MFR_MICRON		0x2c
 #define NAND_MFR_AMD		0x01
+#define NAND_MFR_MACRONIX	0xc2
+#define NAND_MFR_EON		0x92
 
 /**
  * struct nand_flash_dev - NAND Flash Device ID Structure
@@ -615,9 +632,9 @@ extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len,
  * @partitions:		mtd partition list
  * @chip_delay:		R/B delay value in us
  * @options:		Option flags, e.g. 16bit buswidth
- * @ecclayout:		ecc layout info structure
+ * @bbt_options:	BBT option flags, e.g. NAND_BBT_USE_FLASH
+ * @ecclayout:		ECC layout info structure
  * @part_probe_types:	NULL-terminated array of probe types
- * @priv:		hardware controller specific settings
  */
 struct platform_nand_chip {
 	int nr_chips;
@@ -627,8 +644,8 @@ struct platform_nand_chip {
 	struct nand_ecclayout *ecclayout;
 	int chip_delay;
 	unsigned int options;
+	unsigned int bbt_options;
 	const char **part_probe_types;
-	void *priv;
 };
 
 /* Keep gcc happy */
@@ -650,6 +667,7 @@ struct platform_nand_ctrl {
 	int (*dev_ready)(struct mtd_info *mtd);
 	void (*select_chip)(struct mtd_info *mtd, int chip);
 	void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
+	unsigned char (*read_byte)(struct mtd_info *mtd);
 	void *priv;
 };
 
@@ -679,4 +697,23 @@ void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len);
 void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len);
 uint8_t nand_read_byte(struct mtd_info *mtd);
 
+/* return the supported asynchronous timing mode. */
+
+#ifdef CONFIG_SYS_NAND_ONFI_DETECTION
+static inline int onfi_get_async_timing_mode(struct nand_chip *chip)
+{
+	if (!chip->onfi_version)
+		return ONFI_TIMING_MODE_UNKNOWN;
+	return le16_to_cpu(chip->onfi_params.async_timing_mode);
+}
+
+/* return the supported synchronous timing mode. */
+static inline int onfi_get_sync_timing_mode(struct nand_chip *chip)
+{
+	if (!chip->onfi_version)
+		return ONFI_TIMING_MODE_UNKNOWN;
+	return le16_to_cpu(chip->onfi_params.src_sync_timing_mode);
+}
+#endif
+
 #endif /* __LINUX_MTD_NAND_H */
diff --git a/include/linux/string.h b/include/linux/string.h
index e9b134d1428..8e44855712c 100644
--- a/include/linux/string.h
+++ b/include/linux/string.h
@@ -85,6 +85,9 @@ extern int memcmp(const void *,const void *,__kernel_size_t);
 #ifndef __HAVE_ARCH_MEMCHR
 extern void * memchr(const void *,int,__kernel_size_t);
 #endif
+#ifndef __HAVE_ARCH_MEMCHR_INV
+void *memchr_inv(const void *, int, size_t);
+#endif
 
 #ifdef __cplusplus
 }
diff --git a/include/linux/mtd/mtd-abi.h b/include/mtd/mtd-abi.h
index 8bdd23112b4..d51c1abd186 100644
--- a/include/linux/mtd/mtd-abi.h
+++ b/include/mtd/mtd-abi.h
@@ -24,6 +24,25 @@ struct mtd_oob_buf {
 	unsigned char __user *ptr;
 };
 
+/*
+ * MTD operation modes
+ *
+ * @MTD_OPS_PLACE_OOB:	OOB data are placed at the given offset (default)
+ * @MTD_OPS_AUTO_OOB:	OOB data are automatically placed at the free areas
+ *			which are defined by the internal ecclayout
+ * @MTD_OPS_RAW:	data are transferred as-is, with no error correction;
+ *			this mode implies %MTD_OPS_PLACE_OOB
+ *
+ * These modes can be passed to ioctl(MEMWRITE) and are also used internally.
+ * See notes on "MTD file modes" for discussion on %MTD_OPS_RAW vs.
+ * %MTD_FILE_MODE_RAW.
+ */
+enum {
+	MTD_OPS_PLACE_OOB = 0,
+	MTD_OPS_AUTO_OOB = 1,
+	MTD_OPS_RAW = 2,
+};
+
 #define MTD_ABSENT		0
 #define MTD_RAM			1
 #define MTD_ROM			2
@@ -82,24 +101,42 @@ struct otp_info {
 	uint32_t locked;
 };
 
+/* Get basic MTD characteristics info (better to use sysfs) */
 #define MEMGETINFO		_IOR('M', 1, struct mtd_info_user)
+/* Erase segment of MTD */
 #define MEMERASE		_IOW('M', 2, struct erase_info_user)
+/* Write out-of-band data from MTD */
 #define MEMWRITEOOB		_IOWR('M', 3, struct mtd_oob_buf)
+/* Read out-of-band data from MTD */
 #define MEMREADOOB		_IOWR('M', 4, struct mtd_oob_buf)
+/* Lock a chip (for MTD that supports it) */
 #define MEMLOCK			_IOW('M', 5, struct erase_info_user)
+/* Unlock a chip (for MTD that supports it) */
 #define MEMUNLOCK		_IOW('M', 6, struct erase_info_user)
+/* Get the number of different erase regions */
 #define MEMGETREGIONCOUNT	_IOR('M', 7, int)
+/* Get information about the erase region for a specific index */
 #define MEMGETREGIONINFO	_IOWR('M', 8, struct region_info_user)
+/* Get info about OOB modes (e.g., RAW, PLACE, AUTO) - legacy interface */
 #define MEMSETOOBSEL		_IOW('M', 9, struct nand_oobinfo)
 #define MEMGETOOBSEL		_IOR('M', 10, struct nand_oobinfo)
+/* Check if an eraseblock is bad */
 #define MEMGETBADBLOCK		_IOW('M', 11, loff_t)
+/* Mark an eraseblock as bad */
 #define MEMSETBADBLOCK		_IOW('M', 12, loff_t)
+/* Set OTP (One-Time Programmable) mode (factory vs. user) */
 #define OTPSELECT		_IOR('M', 13, int)
+/* Get number of OTP (One-Time Programmable) regions */
 #define OTPGETREGIONCOUNT	_IOW('M', 14, int)
+/* Get all OTP (One-Time Programmable) info about MTD */
 #define OTPGETREGIONINFO	_IOW('M', 15, struct otp_info)
+/* Lock a given range of user data (must be in mode %MTD_FILE_MODE_OTP_USER) */
 #define OTPLOCK			_IOR('M', 16, struct otp_info)
+/* Get ECC layout (deprecated) */
 #define ECCGETLAYOUT		_IOR('M', 17, struct nand_ecclayout)
+/* Get statistics about corrected/uncorrected errors */
 #define ECCGETSTATS		_IOR('M', 18, struct mtd_ecc_stats)
+/* Set MTD mode on a per-file-descriptor basis (see "MTD file modes") */
 #define MTDFILEMODE		_IO('M', 19)
 
 /*
@@ -146,7 +183,21 @@ struct mtd_ecc_stats {
 };
 
 /*
- * Read/write file modes for access to MTD
+ * MTD file modes - for read/write access to MTD
+ *
+ * @MTD_FILE_MODE_NORMAL:	OTP disabled, ECC enabled
+ * @MTD_FILE_MODE_OTP_FACTORY:	OTP enabled in factory mode
+ * @MTD_FILE_MODE_OTP_USER:	OTP enabled in user mode
+ * @MTD_FILE_MODE_RAW:		OTP disabled, ECC disabled
+ *
+ * These modes can be set via ioctl(MTDFILEMODE). The mode mode will be retained
+ * separately for each open file descriptor.
+ *
+ * Note: %MTD_FILE_MODE_RAW provides the same functionality as %MTD_OPS_RAW -
+ * raw access to the flash, without error correction or autoplacement schemes.
+ * Wherever possible, the MTD_OPS_* mode will override the MTD_FILE_MODE_* mode
+ * (e.g., when using ioctl(MEMWRITE)), but in some cases, the MTD_FILE_MODE is
+ * used out of necessity (e.g., `write()', ioctl(MEMWRITEOOB64)).
  */
 enum mtd_file_modes {
 	MTD_MODE_NORMAL = MTD_OTP_OFF,
diff --git a/include/nand.h b/include/nand.h
index f0f3bf94b55..26190e4137d 100644
--- a/include/nand.h
+++ b/include/nand.h
@@ -31,7 +31,8 @@
  * at the same time, so do it here.  When all drivers are
  * converted, this will go away.
  */
-#if defined(CONFIG_NAND_FSL_ELBC) || defined(CONFIG_NAND_ATMEL)
+#if defined(CONFIG_NAND_FSL_ELBC) || defined(CONFIG_NAND_ATMEL)\
+	|| defined(CONFIG_NAND_FSL_IFC)
 #define CONFIG_SYS_NAND_SELF_INIT
 #endif
 
@@ -55,17 +56,17 @@ extern nand_info_t nand_info[];
 
 static inline int nand_read(nand_info_t *info, loff_t ofs, size_t *len, u_char *buf)
 {
-	return info->read(info, ofs, *len, (size_t *)len, buf);
+	return mtd_read(info, ofs, *len, (size_t *)len, buf);
 }
 
 static inline int nand_write(nand_info_t *info, loff_t ofs, size_t *len, u_char *buf)
 {
-	return info->write(info, ofs, *len, (size_t *)len, buf);
+	return mtd_write(info, ofs, *len, (size_t *)len, buf);
 }
 
 static inline int nand_block_isbad(nand_info_t *info, loff_t ofs)
 {
-	return info->block_isbad(info, ofs);
+	return mtd_block_isbad(info, ofs);
 }
 
 static inline int nand_erase(nand_info_t *info, loff_t off, size_t size)
@@ -77,7 +78,7 @@ static inline int nand_erase(nand_info_t *info, loff_t off, size_t size)
 	instr.len = size;
 	instr.callback = 0;
 
-	return info->erase(info, &instr);
+	return mtd_erase(info, &instr);
 }