POST: add new memory regions test

This test is similar to the actual POST memory test but quicker and
far less complete. It checks the address and data lines and then only
tests some regularly placed sub regions of the RAM.
This can be useful when we want to test the RAM but we do not have enough
time to run the full memory test.

The POST memory test code was rearranged in order to avoid code duplication
between the two tests but the memory test functionnality remains the same.

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Ackey-by: Mike Frysinger <vapier@gentoo.org>

1 files changed, 59 insertions, 19 deletions

diff --git a/post/drivers/memory.c b/post/drivers/memory.c
index 69c5dbec453..69973c0f442 100644
--- a/post/drivers/memory.c
+++ b/post/drivers/memory.c
@@ -153,7 +153,7 @@
 #include <post.h>
 #include <watchdog.h>
 
-#if CONFIG_POST & CONFIG_SYS_POST_MEMORY
+#if CONFIG_POST & (CONFIG_SYS_POST_MEMORY | CONFIG_SYS_POST_MEM_REGIONS)
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -413,23 +413,29 @@ static int memory_post_test4(unsigned long start, unsigned long size)
 	return ret;
 }
 
-static int memory_post_tests(unsigned long start, unsigned long size)
+static int memory_post_test_lines(unsigned long start, unsigned long size)
 {
 	int ret = 0;
 
-	if (!ret)
-		ret = memory_post_dataline((unsigned long long *)start);
+	ret = memory_post_dataline((unsigned long long *)start);
 	WATCHDOG_RESET();
 	if (!ret)
 		ret = memory_post_addrline((ulong *)start, (ulong *)start,
-						size);
+				size);
 	WATCHDOG_RESET();
 	if (!ret)
-		ret = memory_post_addrline((ulong *)(start + size - 8),
-					    (ulong *)start, size);
+		ret = memory_post_addrline((ulong *)(start+size-8),
+				(ulong *)start, size);
 	WATCHDOG_RESET();
-	if (!ret)
-		ret = memory_post_test1(start, size, 0x00000000);
+
+	return ret;
+}
+
+static int memory_post_test_patterns(unsigned long start, unsigned long size)
+{
+	int ret = 0;
+
+	ret = memory_post_test1(start, size, 0x00000000);
 	WATCHDOG_RESET();
 	if (!ret)
 		ret = memory_post_test1(start, size, 0xffffffff);
@@ -453,6 +459,33 @@ static int memory_post_tests(unsigned long start, unsigned long size)
 	return ret;
 }
 
+static int memory_post_test_regions(unsigned long start, unsigned long size)
+{
+	unsigned long i;
+	int ret = 0;
+
+	for (i = 0; i < (size >> 20) && (!ret); i++) {
+		if (!ret)
+			ret = memory_post_test_patterns(i << 20, 0x800);
+		if (!ret)
+			ret = memory_post_test_patterns((i << 20) + 0xff800,
+				0x800);
+	}
+
+	return ret;
+}
+
+static int memory_post_tests(unsigned long start, unsigned long size)
+{
+	int ret = 0;
+
+	ret = memory_post_test_lines(start, size);
+	if (!ret)
+		ret = memory_post_test_patterns(start, size);
+
+	return ret;
+}
+
 /*
  * !! this is only valid, if you have contiguous memory banks !!
  */
@@ -490,6 +523,21 @@ void arch_memory_failure_handle(void)
 	return;
 }
 
+int memory_regions_post_test(int flags)
+{
+	int ret = 0;
+	phys_addr_t phys_offset = 0;
+	u32 memsize, vstart;
+
+	arch_memory_test_prepare(&vstart, &memsize, &phys_offset);
+
+	ret = memory_post_test_lines(vstart, memsize);
+	if (!ret)
+		ret = memory_post_test_regions(vstart, memsize);
+
+	return ret;
+}
+
 int memory_post_test(int flags)
 {
 	int ret = 0;
@@ -502,15 +550,7 @@ int memory_post_test(int flags)
 		if (flags & POST_SLOWTEST) {
 			ret = memory_post_tests(vstart, memsize);
 		} else {			/* POST_NORMAL */
-			unsigned long i;
-			for (i = 0; i < (memsize >> 20) && !ret; i++) {
-				if (!ret)
-					ret = memory_post_tests(vstart +
-						(i << 20), 0x800);
-				if (!ret)
-					ret = memory_post_tests(vstart +
-						(i << 20) + 0xff800, 0x800);
-			}
+			ret = memory_post_test_regions(vstart, memsize);
 		}
 	} while (!ret &&
 		!arch_memory_test_advance(&vstart, &memsize, &phys_offset));
@@ -522,4 +562,4 @@ int memory_post_test(int flags)
 	return ret;
 }
 
-#endif /* CONFIG_POST & CONFIG_SYS_POST_MEMORY */
+#endif /* CONFIG_POST&(CONFIG_SYS_POST_MEMORY|CONFIG_SYS_POST_MEM_REGIONS) */