mkimage: add atmelimage

The new atmelimage converts a machine code BLOB to bootable ROM image. Atmel
ROM has no sophisticated image format, it only checks the first 7 ARM vectors.
The vectors can contain valid B or LDR opcodes, the 6'th vector contains the
image size to load.

Additionally the PMECC header can be written by the atmelimage target. The
parameters must be given via the -n switch as a coma separated list. For
example:

mkimage -T atmelimage \
 -n usePmecc=1,sectorPerPage=4,sectorSize=512,spareSize=64,eccBits=4,eccOffset=36 \
 -d spl/u-boot-spl.bin boot.bin

A provided image can be checked for correct header setup. It prints out the
PMECC header parameters if it has one and the 6'th interrupt vector content.

---8<---
Image Type:	ATMEL ROM-Boot Image with PMECC Header
		PMECC header
		====================
		eccOffset:        36
		sectorSize:      512
		eccBitReq:         4
		spareSize:        64
		nbSectorPerPage:   4
		usePmecc:          1
		====================
		6'th vector has 17044 set
--->8---

A SPL binary modified with the atmelimage mkimage target was succesfully
booted on a sama5d34ek via MMC and NAND.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Bo Shen <voice.shen@atmel.com>
Cc: Heiko Schocher <hs@denx.de>
Tested-by: Bo Shen <voice.shen@atmel.com>

1 files changed, 342 insertions, 0 deletions

diff --git a/tools/atmelimage.c b/tools/atmelimage.c
new file mode 100644
index 00000000000..c8101d2ddc2
--- /dev/null
+++ b/tools/atmelimage.c
@@ -0,0 +1,342 @@
+/*
+ * (C) Copyright 2014
+ * Andreas Bießmann <andreas.devel@googlemail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include "imagetool.h"
+#include "mkimage.h"
+
+#include <image.h>
+
+#define pr_err(fmt, args...) fprintf(stderr, "atmelimage Error: " fmt, ##args)
+
+static int atmel_check_image_type(uint8_t type)
+{
+	if (type == IH_TYPE_ATMELIMAGE)
+		return EXIT_SUCCESS;
+	else
+		return EXIT_FAILURE;
+}
+
+static uint32_t nand_pmecc_header[52];
+
+/*
+ * A helper struct for parsing the mkimage -n parameter
+ *
+ * Keep in same order as the configs array!
+ */
+static struct pmecc_config {
+	int use_pmecc;
+	int sector_per_page;
+	int spare_size;
+	int ecc_bits;
+	int sector_size;
+	int ecc_offset;
+} pmecc;
+
+/*
+ * Strings used for configure the PMECC header via -n mkimage switch
+ *
+ * We estimate a coma separated list of key=value pairs. The mkimage -n
+ * parameter argument should not contain any whitespace.
+ *
+ * Keep in same order as struct pmecc_config!
+ */
+static const char * const configs[] = {
+	"usePmecc",
+	"sectorPerPage",
+	"spareSize",
+	"eccBits",
+	"sectorSize",
+	"eccOffset"
+};
+
+static int atmel_find_pmecc_parameter_in_token(const char *token)
+{
+	size_t pos;
+	char *param;
+
+	debug("token: '%s'\n", token);
+
+	for (pos = 0; pos < ARRAY_SIZE(configs); pos++) {
+		if (strncmp(token, configs[pos], strlen(configs[pos])) == 0) {
+			param = strstr(token, "=");
+			if (!param)
+				goto err;
+
+			param++;
+			debug("\t%s parameter: '%s'\n", configs[pos], param);
+
+			switch (pos) {
+			case 0:
+				pmecc.use_pmecc = strtol(param, NULL, 10);
+				return EXIT_SUCCESS;
+			case 1:
+				pmecc.sector_per_page = strtol(param, NULL, 10);
+				return EXIT_SUCCESS;
+			case 2:
+				pmecc.spare_size = strtol(param, NULL, 10);
+				return EXIT_SUCCESS;
+			case 3:
+				pmecc.ecc_bits = strtol(param, NULL, 10);
+				return EXIT_SUCCESS;
+			case 4:
+				pmecc.sector_size = strtol(param, NULL, 10);
+				return EXIT_SUCCESS;
+			case 5:
+				pmecc.ecc_offset = strtol(param, NULL, 10);
+				return EXIT_SUCCESS;
+			}
+		}
+	}
+
+err:
+	pr_err("Could not find parameter in token '%s'\n", token);
+	return EXIT_FAILURE;
+}
+
+static int atmel_parse_pmecc_params(char *txt)
+{
+	char *token;
+
+	token = strtok(txt, ",");
+	while (token != NULL) {
+		if (atmel_find_pmecc_parameter_in_token(token))
+			return EXIT_FAILURE;
+
+		token = strtok(NULL, ",");
+	}
+
+	return EXIT_SUCCESS;
+}
+
+static int atmel_verify_header(unsigned char *ptr, int image_size,
+			struct image_tool_params *params)
+{
+	uint32_t *ints = (uint32_t *)ptr;
+	size_t pos;
+	size_t size = image_size;
+
+	/* check if we have an PMECC header attached */
+	for (pos = 0; pos < ARRAY_SIZE(nand_pmecc_header); pos++)
+		if (ints[pos] >> 28 != 0xC)
+			break;
+
+	if (pos == ARRAY_SIZE(nand_pmecc_header)) {
+		ints += ARRAY_SIZE(nand_pmecc_header);
+		size -= sizeof(nand_pmecc_header);
+	}
+
+	/* check the seven interrupt vectors of binary */
+	for (pos = 0; pos < 7; pos++) {
+		debug("atmelimage: interrupt vector #%d is 0x%08X\n", pos+1,
+		      ints[pos]);
+		/*
+		 * all vectors except the 6'th one must contain valid
+		 * LDR or B Opcode
+		 */
+		if (pos == 5)
+			/* 6'th vector has image size set, check later */
+			continue;
+		if ((ints[pos] & 0xff000000) == 0xea000000)
+			/* valid B Opcode */
+			continue;
+		if ((ints[pos] & 0xfffff000) == 0xe59ff000)
+			/* valid LDR (I=0, P=1, U=1, B=0, W=0, L=1) */
+			continue;
+		/* ouch, one of the checks has missed ... */
+		return 1;
+	}
+
+	return ints[5] != cpu_to_le32(size);
+}
+
+static void atmel_print_pmecc_header(const uint32_t word)
+{
+	int val;
+
+	printf("\t\tPMECC header\n");
+
+	printf("\t\t====================\n");
+
+	val = (word >> 18) & 0x1ff;
+	printf("\t\teccOffset: %9i\n", val);
+
+	val = (((word >> 16) & 0x3) == 0) ? 512 : 1024;
+	printf("\t\tsectorSize: %8i\n", val);
+
+	if (((word >> 13) & 0x7) <= 2)
+		val = (2 << ((word >> 13) & 0x7));
+	else
+		val = (12 << (((word >> 13) & 0x7) - 3));
+	printf("\t\teccBitReq: %9i\n", val);
+
+	val = (word >> 4) & 0x1ff;
+	printf("\t\tspareSize: %9i\n", val);
+
+	val = (1 << ((word >> 1) & 0x3));
+	printf("\t\tnbSectorPerPage: %3i\n", val);
+
+	printf("\t\tusePmecc: %10i\n", word & 0x1);
+	printf("\t\t====================\n");
+}
+
+static void atmel_print_header(const void *ptr)
+{
+	uint32_t *ints = (uint32_t *)ptr;
+	size_t pos;
+
+	/* check if we have an PMECC header attached */
+	for (pos = 0; pos < ARRAY_SIZE(nand_pmecc_header); pos++)
+		if (ints[pos] >> 28 != 0xC)
+			break;
+
+	if (pos == ARRAY_SIZE(nand_pmecc_header)) {
+		printf("Image Type:\tATMEL ROM-Boot Image with PMECC Header\n");
+		atmel_print_pmecc_header(ints[0]);
+		pos += 5;
+	} else {
+		printf("Image Type:\tATMEL ROM-Boot Image without PMECC Header\n");
+		pos = 5;
+	}
+	printf("\t\t6'th vector has %u set\n", le32_to_cpu(ints[pos]));
+}
+
+static void atmel_set_header(void *ptr, struct stat *sbuf, int ifd,
+				struct image_tool_params *params)
+{
+	/* just save the image size into 6'th interrupt vector */
+	uint32_t *ints = (uint32_t *)ptr;
+	size_t cnt;
+	size_t pos = 5;
+	size_t size = sbuf->st_size;
+
+	for (cnt = 0; cnt < ARRAY_SIZE(nand_pmecc_header); cnt++)
+		if (ints[cnt] >> 28 != 0xC)
+			break;
+
+	if (cnt == ARRAY_SIZE(nand_pmecc_header)) {
+		pos += ARRAY_SIZE(nand_pmecc_header);
+		size -= sizeof(nand_pmecc_header);
+	}
+
+	ints[pos] = cpu_to_le32(size);
+}
+
+static int atmel_check_params(struct image_tool_params *params)
+{
+	if (strlen(params->imagename) > 0)
+		if (atmel_parse_pmecc_params(params->imagename))
+			return EXIT_FAILURE;
+
+	return !(!params->eflag &&
+		!params->fflag &&
+		!params->xflag &&
+		((params->dflag && !params->lflag) ||
+		 (params->lflag && !params->dflag)));
+}
+
+static int atmel_vrec_header(struct image_tool_params *params,
+				struct image_type_params *tparams)
+{
+	uint32_t tmp;
+	size_t pos;
+
+	if (strlen(params->imagename) == 0)
+		return EXIT_SUCCESS;
+
+	tmp = 0xC << 28;
+
+	tmp |= (pmecc.ecc_offset & 0x1ff) << 18;
+
+	switch (pmecc.sector_size) {
+	case 512:
+		tmp |= 0 << 16;
+		break;
+	case 1024:
+		tmp |= 1 << 16;
+		break;
+
+	default:
+		pr_err("Wrong sectorSize (%i) for PMECC header\n",
+		       pmecc.sector_size);
+		return EXIT_FAILURE;
+	}
+
+	switch (pmecc.ecc_bits) {
+	case 2:
+		tmp |= 0 << 13;
+		break;
+	case 4:
+		tmp |= 1 << 13;
+		break;
+	case 8:
+		tmp |= 2 << 13;
+		break;
+	case 12:
+		tmp |= 3 << 13;
+		break;
+	case 24:
+		tmp |= 4 << 13;
+		break;
+
+	default:
+		pr_err("Wrong eccBits (%i) for PMECC header\n",
+		       pmecc.ecc_bits);
+		 return EXIT_FAILURE;
+	}
+
+	tmp |= (pmecc.spare_size & 0x1ff) << 4;
+
+	switch (pmecc.sector_per_page) {
+	case 1:
+		tmp |= 0 << 1;
+		break;
+	case 2:
+		tmp |= 1 << 1;
+		break;
+	case 4:
+		tmp |= 2 << 1;
+		break;
+	case 8:
+		tmp |= 3 << 1;
+		break;
+
+	default:
+		pr_err("Wrong sectorPerPage (%i) for PMECC header\n",
+		       pmecc.sector_per_page);
+		return EXIT_FAILURE;
+	}
+
+	if (pmecc.use_pmecc)
+		tmp |= 1;
+
+	for (pos = 0; pos < ARRAY_SIZE(nand_pmecc_header); pos++)
+		nand_pmecc_header[pos] = tmp;
+
+	debug("PMECC header filled 52 times with 0x%08X\n", tmp);
+
+	tparams->header_size = sizeof(nand_pmecc_header);
+	tparams->hdr = nand_pmecc_header;
+
+	return EXIT_SUCCESS;
+}
+
+static struct image_type_params atmelimage_params = {
+	.name		= "ATMEL ROM-Boot Image support",
+	.header_size	= 0,
+	.hdr		= NULL,
+	.check_image_type = atmel_check_image_type,
+	.verify_header	= atmel_verify_header,
+	.print_header	= atmel_print_header,
+	.set_header	= atmel_set_header,
+	.check_params	= atmel_check_params,
+	.vrec_header	= atmel_vrec_header,
+};
+
+void init_atmel_image_type(void)
+{
+	register_image_type(&atmelimage_params);
+}