aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/sandbox/cpu/os.c2
-rw-r--r--arch/sandbox/cpu/start.c17
-rw-r--r--arch/sandbox/include/asm/config.h8
-rw-r--r--arch/sandbox/include/asm/getopt.h23
-rw-r--r--arch/sandbox/include/asm/sections.h4
-rw-r--r--arch/sandbox/include/asm/spi.h58
-rw-r--r--arch/sandbox/include/asm/state.h9
-rw-r--r--board/sandbox/sandbox/README.sandbox54
-rw-r--r--doc/SPI/README.sandbox-spi64
-rw-r--r--doc/device-tree-bindings/spi/spi-bus.txt92
-rw-r--r--drivers/misc/cros_ec_spi.c3
-rw-r--r--drivers/mtd/spi/Makefile1
-rw-r--r--drivers/mtd/spi/sandbox.c483
-rw-r--r--drivers/mtd/spi/sf_internal.h1
-rw-r--r--drivers/mtd/spi/sf_probe.c28
-rw-r--r--drivers/spi/Makefile1
-rw-r--r--drivers/spi/exynos_spi.c10
-rw-r--r--drivers/spi/sandbox_spi.c204
-rw-r--r--drivers/spi/spi.c19
-rw-r--r--include/configs/exynos5250-dt.h1
-rw-r--r--include/configs/sandbox.h10
-rw-r--r--include/spi.h23
-rw-r--r--include/spi_flash.h13
23 files changed, 1088 insertions, 40 deletions
diff --git a/arch/sandbox/cpu/os.c b/arch/sandbox/cpu/os.c
index db66fd31f25..26f44cb597e 100644
--- a/arch/sandbox/cpu/os.c
+++ b/arch/sandbox/cpu/os.c
@@ -161,7 +161,7 @@ static struct option *long_opts;
int os_parse_args(struct sandbox_state *state, int argc, char *argv[])
{
- struct sb_cmdline_option **sb_opt = __u_boot_sandbox_option_start;
+ struct sandbox_cmdline_option **sb_opt = __u_boot_sandbox_option_start;
size_t num_options = __u_boot_sandbox_option_count();
size_t i;
diff --git a/arch/sandbox/cpu/start.c b/arch/sandbox/cpu/start.c
index f1cb7930b10..1b154547847 100644
--- a/arch/sandbox/cpu/start.c
+++ b/arch/sandbox/cpu/start.c
@@ -13,7 +13,7 @@
int sandbox_early_getopt_check(void)
{
struct sandbox_state *state = state_get_current();
- struct sb_cmdline_option **sb_opt = __u_boot_sandbox_option_start;
+ struct sandbox_cmdline_option **sb_opt = __u_boot_sandbox_option_start;
size_t num_options = __u_boot_sandbox_option_count();
size_t i;
int max_arg_len, max_noarg_len;
@@ -40,7 +40,7 @@ int sandbox_early_getopt_check(void)
max_noarg_len = max_arg_len + 7;
for (i = 0; i < num_options; ++i) {
- struct sb_cmdline_option *opt = sb_opt[i];
+ struct sandbox_cmdline_option *opt = sb_opt[i];
/* first output the short flag if it has one */
if (opt->flag_short >= 0x100)
@@ -61,12 +61,12 @@ int sandbox_early_getopt_check(void)
os_exit(0);
}
-static int sb_cmdline_cb_help(struct sandbox_state *state, const char *arg)
+static int sandbox_cmdline_cb_help(struct sandbox_state *state, const char *arg)
{
/* just flag to sandbox_early_getopt_check to show usage */
return 1;
}
-SB_CMDLINE_OPT_SHORT(help, 'h', 0, "Display help");
+SANDBOX_CMDLINE_OPT_SHORT(help, 'h', 0, "Display help");
int sandbox_main_loop_init(void)
{
@@ -81,19 +81,20 @@ int sandbox_main_loop_init(void)
return 0;
}
-static int sb_cmdline_cb_command(struct sandbox_state *state, const char *arg)
+static int sandbox_cmdline_cb_command(struct sandbox_state *state,
+ const char *arg)
{
state->cmd = arg;
return 0;
}
-SB_CMDLINE_OPT_SHORT(command, 'c', 1, "Execute U-Boot command");
+SANDBOX_CMDLINE_OPT_SHORT(command, 'c', 1, "Execute U-Boot command");
-static int sb_cmdline_cb_fdt(struct sandbox_state *state, const char *arg)
+static int sandbox_cmdline_cb_fdt(struct sandbox_state *state, const char *arg)
{
state->fdt_fname = arg;
return 0;
}
-SB_CMDLINE_OPT_SHORT(fdt, 'd', 1, "Specify U-Boot's control FDT");
+SANDBOX_CMDLINE_OPT_SHORT(fdt, 'd', 1, "Specify U-Boot's control FDT");
int main(int argc, char *argv[])
{
diff --git a/arch/sandbox/include/asm/config.h b/arch/sandbox/include/asm/config.h
index 7755a4defff..ec7729eb4cc 100644
--- a/arch/sandbox/include/asm/config.h
+++ b/arch/sandbox/include/asm/config.h
@@ -9,4 +9,12 @@
#define CONFIG_SANDBOX_ARCH
+/* Used by drivers/spi/sandbox_spi.c and arch/sandbox/include/asm/state.h */
+#ifndef CONFIG_SANDBOX_SPI_MAX_BUS
+#define CONFIG_SANDBOX_SPI_MAX_BUS 1
+#endif
+#ifndef CONFIG_SANDBOX_SPI_MAX_CS
+#define CONFIG_SANDBOX_SPI_MAX_CS 10
+#endif
+
#endif
diff --git a/arch/sandbox/include/asm/getopt.h b/arch/sandbox/include/asm/getopt.h
index 685883cd3f6..3048c2cc30b 100644
--- a/arch/sandbox/include/asm/getopt.h
+++ b/arch/sandbox/include/asm/getopt.h
@@ -18,7 +18,7 @@ struct sandbox_state;
* consumer code should focus on the macros below and
* the callback function.
*/
-struct sb_cmdline_option {
+struct sandbox_cmdline_option {
/* The long flag name: "help" for "--help" */
const char *flag;
/* The (optional) short flag name: "h" for "-h" */
@@ -35,18 +35,19 @@ struct sb_cmdline_option {
* Internal macro to expand the lower macros into the necessary
* magic junk that makes this all work.
*/
-#define _SB_CMDLINE_OPT(f, s, ha, h) \
- static struct sb_cmdline_option sb_cmdline_option_##f = { \
+#define _SANDBOX_CMDLINE_OPT(f, s, ha, h) \
+ static struct sandbox_cmdline_option sandbox_cmdline_option_##f = { \
.flag = #f, \
.flag_short = s, \
.help = h, \
.has_arg = ha, \
- .callback = sb_cmdline_cb_##f, \
+ .callback = sandbox_cmdline_cb_##f, \
}; \
/* Ppointer to the struct in a special section for the linker script */ \
static __attribute__((section(".u_boot_sandbox_getopt"), used)) \
- struct sb_cmdline_option *sb_cmdline_option_##f##_ptr = \
- &sb_cmdline_option_##f
+ struct sandbox_cmdline_option \
+ *sandbox_cmdline_option_##f##_ptr = \
+ &sandbox_cmdline_option_##f
/**
* Macros for end code to declare new command line flags.
@@ -56,16 +57,16 @@ struct sb_cmdline_option {
* @param h The help string displayed when showing --help
*
* This invocation:
- * SB_CMDLINE_OPT(foo, 0, "The foo arg");
+ * SANDBOX_CMDLINE_OPT(foo, 0, "The foo arg");
* Will create a new flag named "--foo" (no short option) that takes
* no argument. If the user specifies "--foo", then the callback func
- * sb_cmdline_cb_foo() will automatically be called.
+ * sandbox_cmdline_cb_foo() will automatically be called.
*/
-#define SB_CMDLINE_OPT(f, ha, h) _SB_CMDLINE_OPT(f, 0, ha, h)
+#define SANDBOX_CMDLINE_OPT(f, ha, h) _SANDBOX_CMDLINE_OPT(f, 0, ha, h)
/*
* Same as above, but @s is used to specify a short flag e.g.
- * SB_CMDLINE_OPT(foo, 'f', 0, "The foo arg");
+ * SANDBOX_CMDLINE_OPT(foo, 'f', 0, "The foo arg");
*/
-#define SB_CMDLINE_OPT_SHORT(f, s, ha, h) _SB_CMDLINE_OPT(f, s, ha, h)
+#define SANDBOX_CMDLINE_OPT_SHORT(f, s, ha, h) _SANDBOX_CMDLINE_OPT(f, s, ha, h)
#endif
diff --git a/arch/sandbox/include/asm/sections.h b/arch/sandbox/include/asm/sections.h
index 4c378600b0f..fbc1bd11a34 100644
--- a/arch/sandbox/include/asm/sections.h
+++ b/arch/sandbox/include/asm/sections.h
@@ -11,9 +11,9 @@
#include <asm-generic/sections.h>
-struct sb_cmdline_option;
+struct sandbox_cmdline_option;
-extern struct sb_cmdline_option *__u_boot_sandbox_option_start[],
+extern struct sandbox_cmdline_option *__u_boot_sandbox_option_start[],
*__u_boot_sandbox_option_end[];
static inline size_t __u_boot_sandbox_option_count(void)
diff --git a/arch/sandbox/include/asm/spi.h b/arch/sandbox/include/asm/spi.h
new file mode 100644
index 00000000000..49b4a0f103a
--- /dev/null
+++ b/arch/sandbox/include/asm/spi.h
@@ -0,0 +1,58 @@
+/*
+ * Simulate a SPI port and clients (see README.sandbox for details)
+ *
+ * Copyright (c) 2011-2013 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __ASM_SPI_H__
+#define __ASM_SPI_H__
+
+#include <linux/types.h>
+
+/*
+ * The interface between the SPI bus and the SPI client. The bus will
+ * instantiate a client, and that then call into it via these entry
+ * points. These should be enough for the client to emulate the SPI
+ * device just like the real hardware.
+ */
+struct sandbox_spi_emu_ops {
+ /* The bus wants to instantiate a new client, so setup everything */
+ int (*setup)(void **priv, const char *spec);
+ /* The bus is done with us, so break things down */
+ void (*free)(void *priv);
+ /* The CS has been "activated" -- we won't worry about low/high */
+ void (*cs_activate)(void *priv);
+ /* The CS has been "deactivated" -- we won't worry about low/high */
+ void (*cs_deactivate)(void *priv);
+ /* The client is rx-ing bytes from the bus, so it should tx some */
+ int (*xfer)(void *priv, const u8 *rx, u8 *tx, uint bytes);
+};
+
+/*
+ * There are times when the data lines are allowed to tristate. What
+ * is actually sensed on the line depends on the hardware. It could
+ * always be 0xFF/0x00 (if there are pull ups/downs), or things could
+ * float and so we'd get garbage back. This func encapsulates that
+ * scenario so we can worry about the details here.
+ */
+static inline void sandbox_spi_tristate(u8 *buf, uint len)
+{
+ /* XXX: make this into a user config option ? */
+ memset(buf, 0xff, len);
+}
+
+/*
+ * Extract the bus/cs from the spi spec and return the start of the spi
+ * client spec. If the bus/cs are invalid for the current config, then
+ * it returns NULL.
+ *
+ * Example: arg="0:1:foo" will set bus to 0, cs to 1, and return "foo"
+ */
+const char *sandbox_spi_parse_spec(const char *arg, unsigned long *bus,
+ unsigned long *cs);
+
+#endif
diff --git a/arch/sandbox/include/asm/state.h b/arch/sandbox/include/asm/state.h
index 093c81d9181..a38820bdeeb 100644
--- a/arch/sandbox/include/asm/state.h
+++ b/arch/sandbox/include/asm/state.h
@@ -15,6 +15,11 @@ enum exit_type_id {
STATE_EXIT_POWER_OFF,
};
+struct sandbox_spi_info {
+ const char *spec;
+ const struct sandbox_spi_emu_ops *ops;
+};
+
/* The complete state of the test system */
struct sandbox_state {
const char *cmd; /* Command to execute */
@@ -23,6 +28,10 @@ struct sandbox_state {
const char *parse_err; /* Error to report from parsing */
int argc; /* Program arguments */
char **argv;
+
+ /* Pointer to information for each SPI bus/cs */
+ struct sandbox_spi_info spi[CONFIG_SANDBOX_SPI_MAX_BUS]
+ [CONFIG_SANDBOX_SPI_MAX_CS];
};
/**
diff --git a/board/sandbox/sandbox/README.sandbox b/board/sandbox/sandbox/README.sandbox
index 30b05416a76..69895574ffd 100644
--- a/board/sandbox/sandbox/README.sandbox
+++ b/board/sandbox/sandbox/README.sandbox
@@ -31,6 +31,60 @@ the console. It does not set the terminal into raw mode, so cursor keys and
history will not work yet.
+SPI Emulation
+-------------
+
+Sandbox supports SPI and SPI flash emulation.
+
+This is controlled by the spi_sf argument, the format of which is:
+
+ bus:cs:device:file
+
+ bus - SPI bus number
+ cs - SPI chip select number
+ device - SPI device emulation name
+ file - File on disk containing the data
+
+For example:
+
+ dd if=/dev/zero of=spi.bin bs=1M count=4
+ ./u-boot --spi_sf 0:0:M25P16:spi.bin
+
+With this setup you can issue SPI flash commands as normal:
+
+=>sf probe
+SF: Detected M25P16 with page size 64 KiB, total 2 MiB
+=>sf read 0 0 10000
+SF: 65536 bytes @ 0x0 Read: OK
+=>
+
+Since this is a full SPI emulation (rather than just flash), you can
+also use low-level SPI commands:
+
+=>sspi 0:0 32 9f
+FF202015
+
+This is issuing a READ_ID command and getting back 20 (ST Micro) part
+0x2015 (the M25P16).
+
+Drivers are connected to a particular bus/cs using sandbox's state
+structure (see the 'spi' member). A set of operations must be provided
+for each driver.
+
+
+Configuration settings for the curious are:
+
+CONFIG_SANDBOX_SPI_MAX_BUS
+ The maximum number of SPI buses supported by the driver (default 1).
+
+CONFIG_SANDBOX_SPI_MAX_CS
+ The maximum number of chip selects supported by the driver
+ (default 10).
+
+CONFIG_SPI_IDLE_VAL
+ The idle value on the SPI bus
+
+
Tests
-----
diff --git a/doc/SPI/README.sandbox-spi b/doc/SPI/README.sandbox-spi
new file mode 100644
index 00000000000..bb73eaf2884
--- /dev/null
+++ b/doc/SPI/README.sandbox-spi
@@ -0,0 +1,64 @@
+Sandbox SPI/SPI Flash Implementation
+====================================
+
+U-Boot supports SPI and SPI flash emuation in sandbox. This must be enabled
+using the --spi_sf paramter when starting U-Boot.
+
+For example:
+
+$ make O=sandbox sandbox_config
+$ make O=sandbox
+$ ./sandbox/u-boot --spi_sf 0:0:W25Q128:b/chromeos_peach/out/image.bin
+
+The four parameters to spi_sf are:
+
+ SPI bus number (typically 0)
+ SPI chip select number (typically 0)
+ SPI chip to emulate
+ File containing emulated data
+
+Supported chips are W25Q16 (2MB), W25Q32 (4MB) and W25Q128 (16MB). Once
+U-Boot it started you can use 'sf' commands as normal. For example:
+
+$ ./b/sandbox/u-boot --spi_sf 0:0:W25Q128:b/chromeos_peach/out/image.bin \
+ -c "sf probe; sf test 0 100000; sf read 0 1000 1000; \
+ sf erase 1000 1000; sf write 0 1000 1000"
+
+
+U-Boot 2013.10-00237-gd4e0fdb (Nov 07 2013 - 20:08:15)
+
+DRAM: 128 MiB
+Using default environment
+
+In: serial
+Out: serial
+Err: serial
+SF: Detected W25Q128BV with page size 256 Bytes, erase size 4 KiB, total 16 MiB
+SPI flash test:
+0 erase: 1 ticks, 1024000 KiB/s 8192.000 Mbps
+1 check: 2 ticks, 512000 KiB/s 4096.000 Mbps
+2 write: 6 ticks, 170666 KiB/s 1365.328 Mbps
+3 read: 0 ticks, 1048576000 KiB/s -201326.-592 Mbps
+Test passed
+0 erase: 1 ticks, 1024000 KiB/s 8192.000 Mbps
+1 check: 2 ticks, 512000 KiB/s 4096.000 Mbps
+2 write: 6 ticks, 170666 KiB/s 1365.328 Mbps
+3 read: 0 ticks, 1048576000 KiB/s -201326.-592 Mbps
+SF: 4096 bytes @ 0x1000 Read: OK
+SF: 4096 bytes @ 0x1000 Erased: OK
+SF: 4096 bytes @ 0x1000 Written: OK
+
+
+Since the SPI bus is fully implemented as well as the SPI flash connected to
+it, you can also use low-level SPI commands to access the flash. For example
+this reads the device ID from the emulated chip:
+
+=> sspi 0 32 9f
+FFEF4018
+
+
+Simon Glass
+sjg@chromium.org
+7/11/2013
+Note that the sandbox SPI implementation was written by Mike Frysinger
+<vapier@gentoo.org>.
diff --git a/doc/device-tree-bindings/spi/spi-bus.txt b/doc/device-tree-bindings/spi/spi-bus.txt
new file mode 100644
index 00000000000..800dafe5b01
--- /dev/null
+++ b/doc/device-tree-bindings/spi/spi-bus.txt
@@ -0,0 +1,92 @@
+SPI (Serial Peripheral Interface) busses
+
+SPI busses can be described with a node for the SPI master device
+and a set of child nodes for each SPI slave on the bus. For this
+discussion, it is assumed that the system's SPI controller is in
+SPI master mode. This binding does not describe SPI controllers
+in slave mode.
+
+The SPI master node requires the following properties:
+- #address-cells - number of cells required to define a chip select
+ address on the SPI bus.
+- #size-cells - should be zero.
+- compatible - name of SPI bus controller following generic names
+ recommended practice.
+- cs-gpios - (optional) gpios chip select.
+No other properties are required in the SPI bus node. It is assumed
+that a driver for an SPI bus device will understand that it is an SPI bus.
+However, the binding does not attempt to define the specific method for
+assigning chip select numbers. Since SPI chip select configuration is
+flexible and non-standardized, it is left out of this binding with the
+assumption that board specific platform code will be used to manage
+chip selects. Individual drivers can define additional properties to
+support describing the chip select layout.
+
+Optional property:
+- num-cs : total number of chipselects
+
+If cs-gpios is used the number of chip select will automatically increased
+with max(cs-gpios > hw cs)
+
+So if for example the controller has 2 CS lines, and the cs-gpios
+property looks like this:
+
+cs-gpios = <&gpio1 0 0> <0> <&gpio1 1 0> <&gpio1 2 0>;
+
+Then it should be configured so that num_chipselect = 4 with the
+following mapping:
+
+cs0 : &gpio1 0 0
+cs1 : native
+cs2 : &gpio1 1 0
+cs3 : &gpio1 2 0
+
+SPI slave nodes must be children of the SPI master node and can
+contain the following properties.
+- reg - (required) chip select address of device.
+- compatible - (required) name of SPI device following generic names
+ recommended practice
+- spi-max-frequency - (required) Maximum SPI clocking speed of device in Hz
+- spi-cpol - (optional) Empty property indicating device requires
+ inverse clock polarity (CPOL) mode
+- spi-cpha - (optional) Empty property indicating device requires
+ shifted clock phase (CPHA) mode
+- spi-cs-high - (optional) Empty property indicating device requires
+ chip select active high
+- spi-3wire - (optional) Empty property indicating device requires
+ 3-wire mode.
+- spi-tx-bus-width - (optional) The bus width(number of data wires) that
+ used for MOSI. Defaults to 1 if not present.
+- spi-rx-bus-width - (optional) The bus width(number of data wires) that
+ used for MISO. Defaults to 1 if not present.
+
+Some SPI controllers and devices support Dual and Quad SPI transfer mode.
+It allows data in SPI system transfered in 2 wires(DUAL) or 4 wires(QUAD).
+Now the value that spi-tx-bus-width and spi-rx-bus-width can receive is
+only 1(SINGLE), 2(DUAL) and 4(QUAD).
+Dual/Quad mode is not allowed when 3-wire mode is used.
+
+If a gpio chipselect is used for the SPI slave the gpio number will be passed
+via the cs_gpio
+
+SPI example for an MPC5200 SPI bus:
+ spi@f00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+ reg = <0xf00 0x20>;
+ interrupts = <2 13 0 2 14 0>;
+ interrupt-parent = <&mpc5200_pic>;
+
+ ethernet-switch@0 {
+ compatible = "micrel,ks8995m";
+ spi-max-frequency = <1000000>;
+ reg = <0>;
+ };
+
+ codec@1 {
+ compatible = "ti,tlv320aic26";
+ spi-max-frequency = <100000>;
+ reg = <1>;
+ };
+ };
diff --git a/drivers/misc/cros_ec_spi.c b/drivers/misc/cros_ec_spi.c
index 202acf258b8..2fc911025ee 100644
--- a/drivers/misc/cros_ec_spi.c
+++ b/drivers/misc/cros_ec_spi.c
@@ -135,8 +135,7 @@ int cros_ec_spi_decode_fdt(struct cros_ec_dev *dev, const void *blob)
*/
int cros_ec_spi_init(struct cros_ec_dev *dev, const void *blob)
{
- dev->spi = spi_setup_slave_fdt(blob, dev->parent_node,
- dev->cs, dev->max_frequency, 0);
+ dev->spi = spi_setup_slave_fdt(blob, dev->parent_node, dev->node);
if (!dev->spi) {
debug("%s: Could not setup SPI slave\n", __func__);
return -1;
diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
index 1bbeb7da3b8..26483a23f79 100644
--- a/drivers/mtd/spi/Makefile
+++ b/drivers/mtd/spi/Makefile
@@ -13,4 +13,5 @@ endif
obj-$(CONFIG_CMD_SF) += sf.o
obj-$(CONFIG_SPI_FLASH) += sf_probe.o sf_ops.o
obj-$(CONFIG_SPI_FRAM_RAMTRON) += ramtron.o
+obj-$(CONFIG_SPI_FLASH_SANDBOX) += sandbox.o
obj-$(CONFIG_SPI_M95XXX) += eeprom_m95xxx.o
diff --git a/drivers/mtd/spi/sandbox.c b/drivers/mtd/spi/sandbox.c
new file mode 100644
index 00000000000..a62ef4cbbd3
--- /dev/null
+++ b/drivers/mtd/spi/sandbox.c
@@ -0,0 +1,483 @@
+/*
+ * Simulate a SPI flash
+ *
+ * Copyright (c) 2011-2013 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <spi.h>
+#include <os.h>
+
+#include <spi_flash.h>
+#include "sf_internal.h"
+
+#include <asm/getopt.h>
+#include <asm/spi.h>
+#include <asm/state.h>
+
+/*
+ * The different states that our SPI flash transitions between.
+ * We need to keep track of this across multiple xfer calls since
+ * the SPI bus could possibly call down into us multiple times.
+ */
+enum sandbox_sf_state {
+ SF_CMD, /* default state -- we're awaiting a command */
+ SF_ID, /* read the flash's (jedec) ID code */
+ SF_ADDR, /* processing the offset in the flash to read/etc... */
+ SF_READ, /* reading data from the flash */
+ SF_WRITE, /* writing data to the flash, i.e. page programming */
+ SF_ERASE, /* erase the flash */
+ SF_READ_STATUS, /* read the flash's status register */
+ SF_READ_STATUS1, /* read the flash's status register upper 8 bits*/
+};
+
+static const char *sandbox_sf_state_name(enum sandbox_sf_state state)
+{
+ static const char * const states[] = {
+ "CMD", "ID", "ADDR", "READ", "WRITE", "ERASE", "READ_STATUS",
+ };
+ return states[state];
+}
+
+/* Bits for the status register */
+#define STAT_WIP (1 << 0)
+#define STAT_WEL (1 << 1)
+
+/* Assume all SPI flashes have 3 byte addresses since they do atm */
+#define SF_ADDR_LEN 3
+
+struct sandbox_spi_flash_erase_commands {
+ u8 cmd;
+ u32 size;
+};
+#define IDCODE_LEN 5
+#define MAX_ERASE_CMDS 3
+struct sandbox_spi_flash_data {
+ const char *name;
+ u8 idcode[IDCODE_LEN];
+ u32 size;
+ const struct sandbox_spi_flash_erase_commands
+ erase_cmds[MAX_ERASE_CMDS];
+};
+
+/* Structure describing all the flashes we know how to emulate */
+static const struct sandbox_spi_flash_data sandbox_sf_flashes[] = {
+ {
+ "M25P16", { 0x20, 0x20, 0x15 }, (2 << 20),
+ { /* erase commands */
+ { 0xd8, (64 << 10), }, /* sector */
+ { 0xc7, (2 << 20), }, /* bulk */
+ },
+ },
+ {
+ "W25Q32", { 0xef, 0x40, 0x16 }, (4 << 20),
+ { /* erase commands */
+ { 0x20, (4 << 10), }, /* 4KB */
+ { 0xd8, (64 << 10), }, /* sector */
+ { 0xc7, (4 << 20), }, /* bulk */
+ },
+ },
+ {
+ "W25Q128", { 0xef, 0x40, 0x18 }, (16 << 20),
+ { /* erase commands */
+ { 0x20, (4 << 10), }, /* 4KB */
+ { 0xd8, (64 << 10), }, /* sector */
+ { 0xc7, (16 << 20), }, /* bulk */
+ },
+ },
+};
+
+/* Used to quickly bulk erase backing store */
+static u8 sandbox_sf_0xff[0x1000];
+
+/* Internal state data for each SPI flash */
+struct sandbox_spi_flash {
+ /*
+ * As we receive data over the SPI bus, our flash transitions
+ * between states. For example, we start off in the SF_CMD
+ * state where the first byte tells us what operation to perform
+ * (such as read or write the flash). But the operation itself
+ * can go through a few states such as first reading in the
+ * offset in the flash to perform the requested operation.
+ * Thus "state" stores the exact state that our machine is in
+ * while "cmd" stores the overall command we're processing.
+ */
+ enum sandbox_sf_state state;
+ uint cmd;
+ const void *cmd_data;
+ /* Current position in the flash; used when reading/writing/etc... */
+ uint off;
+ /* How many address bytes we've consumed */
+ uint addr_bytes, pad_addr_bytes;
+ /* The current flash status (see STAT_XXX defines above) */
+ u16 status;
+ /* Data describing the flash we're emulating */
+ const struct sandbox_spi_flash_data *data;
+ /* The file on disk to serv up data from */
+ int fd;
+};
+
+static int sandbox_sf_setup(void **priv, const char *spec)
+{
+ /* spec = idcode:file */
+ struct sandbox_spi_flash *sbsf;
+ const char *file;
+ size_t i, len, idname_len;
+ const struct sandbox_spi_flash_data *data;
+
+ file = strchr(spec, ':');
+ if (!file) {
+ printf("sandbox_sf: unable to parse file\n");
+ goto error;
+ }
+ idname_len = file - spec;
+ ++file;
+
+ for (i = 0; i < ARRAY_SIZE(sandbox_sf_flashes); ++i) {
+ data = &sandbox_sf_flashes[i];
+ len = strlen(data->name);
+ if (idname_len != len)
+ continue;
+ if (!memcmp(spec, data->name, len))
+ break;
+ }
+ if (i == ARRAY_SIZE(sandbox_sf_flashes)) {
+ printf("sandbox_sf: unknown flash '%*s'\n", (int)idname_len,
+ spec);
+ goto error;
+ }
+
+ if (sandbox_sf_0xff[0] == 0x00)
+ memset(sandbox_sf_0xff, 0xff, sizeof(sandbox_sf_0xff));
+
+ sbsf = calloc(sizeof(*sbsf), 1);
+ if (!sbsf) {
+ printf("sandbox_sf: out of memory\n");
+ goto error;
+ }
+
+ sbsf->fd = os_open(file, 02);
+ if (sbsf->fd == -1) {
+ free(sbsf);
+ printf("sandbox_sf: unable to open file '%s'\n", file);
+ goto error;
+ }
+
+ sbsf->data = data;
+
+ *priv = sbsf;
+ return 0;
+
+ error:
+ return 1;
+}
+
+static void sandbox_sf_free(void *priv)
+{
+ struct sandbox_spi_flash *sbsf = priv;
+
+ os_close(sbsf->fd);
+ free(sbsf);
+}
+
+static void sandbox_sf_cs_activate(void *priv)
+{
+ struct sandbox_spi_flash *sbsf = priv;
+
+ debug("sandbox_sf: CS activated; state is fresh!\n");
+
+ /* CS is asserted, so reset state */
+ sbsf->off = 0;
+ sbsf->addr_bytes = 0;
+ sbsf->pad_addr_bytes = 0;
+ sbsf->state = SF_CMD;
+ sbsf->cmd = SF_CMD;
+}
+
+static void sandbox_sf_cs_deactivate(void *priv)
+{
+ debug("sandbox_sf: CS deactivated; cmd done processing!\n");
+}
+
+/* Figure out what command this stream is telling us to do */
+static int sandbox_sf_process_cmd(struct sandbox_spi_flash *sbsf, const u8 *rx,
+ u8 *tx)
+{
+ enum sandbox_sf_state oldstate = sbsf->state;
+
+ /* We need to output a byte for the cmd byte we just ate */
+ sandbox_spi_tristate(tx, 1);
+
+ sbsf->cmd = rx[0];
+ switch (sbsf->cmd) {
+ case CMD_READ_ID:
+ sbsf->state = SF_ID;
+ sbsf->cmd = SF_ID;
+ break;
+ case CMD_READ_ARRAY_FAST:
+ sbsf->pad_addr_bytes = 1;
+ case CMD_READ_ARRAY_SLOW:
+ case CMD_PAGE_PROGRAM:
+ state_addr:
+ sbsf->state = SF_ADDR;
+ break;
+ case CMD_WRITE_DISABLE:
+ debug(" write disabled\n");
+ sbsf->status &= ~STAT_WEL;
+ break;
+ case CMD_READ_STATUS:
+ sbsf->state = SF_READ_STATUS;
+ break;
+ case CMD_READ_STATUS1:
+ sbsf->state = SF_READ_STATUS1;
+ break;
+ case CMD_WRITE_ENABLE:
+ debug(" write enabled\n");
+ sbsf->status |= STAT_WEL;
+ break;
+ default: {
+ size_t i;
+
+ /* handle erase commands first */
+ for (i = 0; i < MAX_ERASE_CMDS; ++i) {
+ const struct sandbox_spi_flash_erase_commands *
+ erase_cmd = &sbsf->data->erase_cmds[i];
+
+ if (erase_cmd->cmd == 0x00)
+ continue;
+ if (sbsf->cmd != erase_cmd->cmd)
+ continue;
+
+ sbsf->cmd_data = erase_cmd;
+ goto state_addr;
+ }
+
+ debug(" cmd unknown: %#x\n", sbsf->cmd);
+ return 1;
+ }
+ }
+
+ if (oldstate != sbsf->state)
+ debug(" cmd: transition to %s state\n",
+ sandbox_sf_state_name(sbsf->state));
+
+ return 0;
+}
+
+int sandbox_erase_part(struct sandbox_spi_flash *sbsf, int size)
+{
+ int todo;
+ int ret;
+
+ while (size > 0) {
+ todo = min(size, sizeof(sandbox_sf_0xff));
+ ret = os_write(sbsf->fd, sandbox_sf_0xff, todo);
+ if (ret != todo)
+ return ret;
+ size -= todo;
+ }
+
+ return 0;
+}
+
+static int sandbox_sf_xfer(void *priv, const u8 *rx, u8 *tx,
+ uint bytes)
+{
+ struct sandbox_spi_flash *sbsf = priv;
+ uint cnt, pos = 0;
+ int ret;
+
+ debug("sandbox_sf: state:%x(%s) bytes:%u\n", sbsf->state,
+ sandbox_sf_state_name(sbsf->state), bytes);
+
+ if (sbsf->state == SF_CMD) {
+ /* Figure out the initial state */
+ if (sandbox_sf_process_cmd(sbsf, rx, tx))
+ return 1;
+ ++pos;
+ }
+
+ /* Process the remaining data */
+ while (pos < bytes) {
+ switch (sbsf->state) {
+ case SF_ID: {
+ u8 id;
+
+ debug(" id: off:%u tx:", sbsf->off);
+ if (sbsf->off < IDCODE_LEN)
+ id = sbsf->data->idcode[sbsf->off];
+ else
+ id = 0;
+ debug("%02x\n", id);
+ tx[pos++] = id;
+ ++sbsf->off;
+ break;
+ }
+ case SF_ADDR:
+ debug(" addr: bytes:%u rx:%02x ", sbsf->addr_bytes,
+ rx[pos]);
+
+ if (sbsf->addr_bytes++ < SF_ADDR_LEN)
+ sbsf->off = (sbsf->off << 8) | rx[pos];
+ debug("addr:%06x\n", sbsf->off);
+
+ sandbox_spi_tristate(&tx[pos++], 1);
+
+ /* See if we're done processing */
+ if (sbsf->addr_bytes <
+ SF_ADDR_LEN + sbsf->pad_addr_bytes)
+ break;
+
+ /* Next state! */
+ if (os_lseek(sbsf->fd, sbsf->off, OS_SEEK_SET) < 0) {
+ puts("sandbox_sf: os_lseek() failed");
+ return 1;
+ }
+ switch (sbsf->cmd) {
+ case CMD_READ_ARRAY_FAST:
+ case CMD_READ_ARRAY_SLOW:
+ sbsf->state = SF_READ;
+ break;
+ case CMD_PAGE_PROGRAM:
+ sbsf->state = SF_WRITE;
+ break;
+ default:
+ /* assume erase state ... */
+ sbsf->state = SF_ERASE;
+ goto case_sf_erase;
+ }
+ debug(" cmd: transition to %s state\n",
+ sandbox_sf_state_name(sbsf->state));
+ break;
+ case SF_READ:
+ /*
+ * XXX: need to handle exotic behavior:
+ * - reading past end of device
+ */
+
+ cnt = bytes - pos;
+ debug(" tx: read(%u)\n", cnt);
+ ret = os_read(sbsf->fd, tx + pos, cnt);
+ if (ret < 0) {
+ puts("sandbox_spi: os_read() failed\n");
+ return 1;
+ }
+ pos += ret;
+ break;
+ case SF_READ_STATUS:
+ debug(" read status: %#x\n", sbsf->status);
+ cnt = bytes - pos;
+ memset(tx + pos, sbsf->status, cnt);
+ pos += cnt;
+ break;
+ case SF_READ_STATUS1:
+ debug(" read status: %#x\n", sbsf->status);
+ cnt = bytes - pos;
+ memset(tx + pos, sbsf->status >> 8, cnt);
+ pos += cnt;
+ break;
+ case SF_WRITE:
+ /*
+ * XXX: need to handle exotic behavior:
+ * - unaligned addresses
+ * - more than a page (256) worth of data
+ * - reading past end of device
+ */
+ if (!(sbsf->status & STAT_WEL)) {
+ puts("sandbox_sf: write enable not set before write\n");
+ goto done;
+ }
+
+ cnt = bytes - pos;
+ debug(" rx: write(%u)\n", cnt);
+ sandbox_spi_tristate(&tx[pos], cnt);
+ ret = os_write(sbsf->fd, rx + pos, cnt);
+ if (ret < 0) {
+ puts("sandbox_spi: os_write() failed\n");
+ return 1;
+ }
+ pos += ret;
+ sbsf->status &= ~STAT_WEL;
+ break;
+ case SF_ERASE:
+ case_sf_erase: {
+ const struct sandbox_spi_flash_erase_commands *
+ erase_cmd = sbsf->cmd_data;
+
+ if (!(sbsf->status & STAT_WEL)) {
+ puts("sandbox_sf: write enable not set before erase\n");
+ goto done;
+ }
+
+ /* verify address is aligned */
+ if (sbsf->off & (erase_cmd->size - 1)) {
+ debug(" sector erase: cmd:%#x needs align:%#x, but we got %#x\n",
+ erase_cmd->cmd, erase_cmd->size,
+ sbsf->off);
+ sbsf->status &= ~STAT_WEL;
+ goto done;
+ }
+
+ debug(" sector erase addr: %u\n", sbsf->off);
+
+ cnt = bytes - pos;
+ sandbox_spi_tristate(&tx[pos], cnt);
+ pos += cnt;
+
+ /*
+ * TODO(vapier@gentoo.org): latch WIP in status, and
+ * delay before clearing it ?
+ */
+ ret = sandbox_erase_part(sbsf, erase_cmd->size);
+ sbsf->status &= ~STAT_WEL;
+ if (ret) {
+ debug("sandbox_sf: Erase failed\n");
+ goto done;
+ }
+ goto done;
+ }
+ default:
+ debug(" ??? no idea what to do ???\n");
+ goto done;
+ }
+ }
+
+ done:
+ return pos == bytes ? 0 : 1;
+}
+
+static const struct sandbox_spi_emu_ops sandbox_sf_ops = {
+ .setup = sandbox_sf_setup,
+ .free = sandbox_sf_free,
+ .cs_activate = sandbox_sf_cs_activate,
+ .cs_deactivate = sandbox_sf_cs_deactivate,
+ .xfer = sandbox_sf_xfer,
+};
+
+static int sandbox_cmdline_cb_spi_sf(struct sandbox_state *state,
+ const char *arg)
+{
+ unsigned long bus, cs;
+ const char *spec = sandbox_spi_parse_spec(arg, &bus, &cs);
+
+ if (!spec)
+ return 1;
+
+ /*
+ * It is safe to not make a copy of 'spec' because it comes from the
+ * command line.
+ *
+ * TODO(sjg@chromium.org): It would be nice if we could parse the
+ * spec here, but the problem is that no U-Boot init has been done
+ * yet. Perhaps we can figure something out.
+ */
+ state->spi[bus][cs].ops = &sandbox_sf_ops;
+ state->spi[bus][cs].spec = spec;
+ return 0;
+}
+SANDBOX_CMDLINE_OPT(spi_sf, 1, "connect a SPI flash: <bus>:<cs>:<id>:<file>");
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
index 732ddf836df..d291746ed4a 100644
--- a/drivers/mtd/spi/sf_internal.h
+++ b/drivers/mtd/spi/sf_internal.h
@@ -28,6 +28,7 @@
#define CMD_PAGE_PROGRAM 0x02
#define CMD_WRITE_DISABLE 0x04
#define CMD_READ_STATUS 0x05
+#define CMD_READ_STATUS1 0x35
#define CMD_WRITE_ENABLE 0x06
#define CMD_READ_CONFIG 0x35
#define CMD_FLAG_STATUS 0x70
diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c
index 5eb8ffe843e..c1eb7548983 100644
--- a/drivers/mtd/spi/sf_probe.c
+++ b/drivers/mtd/spi/sf_probe.c
@@ -13,6 +13,7 @@
#include <malloc.h>
#include <spi.h>
#include <spi_flash.h>
+#include <asm/io.h>
#include "sf_internal.h"
@@ -279,22 +280,19 @@ int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
debug("%s: Memory map must cover entire device\n", __func__);
return -1;
}
- flash->memory_map = (void *)addr;
+ flash->memory_map = map_sysmem(addr, size);
return 0;
}
#endif /* CONFIG_OF_CONTROL */
-struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int spi_mode)
+static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi)
{
- struct spi_slave *spi;
struct spi_flash *flash = NULL;
u8 idcode[5];
int ret;
/* Setup spi_slave */
- spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
if (!spi) {
printf("SF: Failed to set up slave\n");
return NULL;
@@ -358,6 +356,26 @@ err_claim_bus:
return NULL;
}
+struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int spi_mode)
+{
+ struct spi_slave *spi;
+
+ spi = spi_setup_slave(bus, cs, max_hz, spi_mode);
+ return spi_flash_probe_slave(spi);
+}
+
+#ifdef CONFIG_OF_SPI_FLASH
+struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node,
+ int spi_node)
+{
+ struct spi_slave *spi;
+
+ spi = spi_setup_slave_fdt(blob, slave_node, spi_node);
+ return spi_flash_probe_slave(spi);
+}
+#endif
+
void spi_flash_free(struct spi_flash *flash)
{
spi_free_slave(flash->spi);
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 27902fe394e..ed4ecd754b4 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_MXC_SPI) += mxc_spi.o
obj-$(CONFIG_MXS_SPI) += mxs_spi.o
obj-$(CONFIG_OC_TINY_SPI) += oc_tiny_spi.o
obj-$(CONFIG_OMAP3_SPI) += omap3_spi.o
+obj-$(CONFIG_SANDBOX_SPI) += sandbox_spi.o
obj-$(CONFIG_SOFT_SPI) += soft_spi.o
obj-$(CONFIG_SH_SPI) += sh_spi.o
obj-$(CONFIG_FSL_ESPI) += fsl_espi.o
diff --git a/drivers/spi/exynos_spi.c b/drivers/spi/exynos_spi.c
index 699c57eb6d9..4d5def2d319 100644
--- a/drivers/spi/exynos_spi.c
+++ b/drivers/spi/exynos_spi.c
@@ -529,18 +529,18 @@ static int process_nodes(const void *blob, int node_list[], int count)
* @param node SPI peripheral node to use
* @return 0 if ok, -1 on error
*/
-struct spi_slave *spi_setup_slave_fdt(const void *blob, int node,
- unsigned int cs, unsigned int max_hz, unsigned int mode)
+struct spi_slave *spi_setup_slave_fdt(const void *blob, int slave_node,
+ int spi_node)
{
struct spi_bus *bus;
unsigned int i;
for (i = 0, bus = spi_bus; i < bus_count; i++, bus++) {
- if (bus->node == node)
- return spi_setup_slave(i, cs, max_hz, mode);
+ if (bus->node == spi_node)
+ return spi_base_setup_slave_fdt(blob, i, slave_node);
}
- debug("%s: Failed to find bus node %d\n", __func__, node);
+ debug("%s: Failed to find bus node %d\n", __func__, spi_node);
return NULL;
}
diff --git a/drivers/spi/sandbox_spi.c b/drivers/spi/sandbox_spi.c
new file mode 100644
index 00000000000..7895305a053
--- /dev/null
+++ b/drivers/spi/sandbox_spi.c
@@ -0,0 +1,204 @@
+/*
+ * Simulate a SPI port
+ *
+ * Copyright (c) 2011-2013 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <spi.h>
+#include <os.h>
+
+#include <asm/errno.h>
+#include <asm/spi.h>
+#include <asm/state.h>
+
+#ifndef CONFIG_SPI_IDLE_VAL
+# define CONFIG_SPI_IDLE_VAL 0xFF
+#endif
+
+struct sandbox_spi_slave {
+ struct spi_slave slave;
+ const struct sandbox_spi_emu_ops *ops;
+ void *priv;
+};
+
+#define to_sandbox_spi_slave(s) container_of(s, struct sandbox_spi_slave, slave)
+
+const char *sandbox_spi_parse_spec(const char *arg, unsigned long *bus,
+ unsigned long *cs)
+{
+ char *endp;
+
+ *bus = simple_strtoul(arg, &endp, 0);
+ if (*endp != ':' || *bus >= CONFIG_SANDBOX_SPI_MAX_BUS)
+ return NULL;
+
+ *cs = simple_strtoul(endp + 1, &endp, 0);
+ if (*endp != ':' || *cs >= CONFIG_SANDBOX_SPI_MAX_CS)
+ return NULL;
+
+ return endp + 1;
+}
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+ return bus < CONFIG_SANDBOX_SPI_MAX_BUS &&
+ cs < CONFIG_SANDBOX_SPI_MAX_CS;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+ struct sandbox_spi_slave *sss = to_sandbox_spi_slave(slave);
+
+ debug("sandbox_spi: activating CS\n");
+ if (sss->ops->cs_activate)
+ sss->ops->cs_activate(sss->priv);
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+ struct sandbox_spi_slave *sss = to_sandbox_spi_slave(slave);
+
+ debug("sandbox_spi: deactivating CS\n");
+ if (sss->ops->cs_deactivate)
+ sss->ops->cs_deactivate(sss->priv);
+}
+
+void spi_init(void)
+{
+}
+
+void spi_set_speed(struct spi_slave *slave, uint hz)
+{
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct sandbox_spi_slave *sss;
+ struct sandbox_state *state = state_get_current();
+ const char *spec;
+
+ if (!spi_cs_is_valid(bus, cs)) {
+ debug("sandbox_spi: Invalid SPI bus/cs\n");
+ return NULL;
+ }
+
+ sss = spi_alloc_slave(struct sandbox_spi_slave, bus, cs);
+ if (!sss) {
+ debug("sandbox_spi: Out of memory\n");
+ return NULL;
+ }
+
+ spec = state->spi[bus][cs].spec;
+ sss->ops = state->spi[bus][cs].ops;
+ if (!spec || !sss->ops || sss->ops->setup(&sss->priv, spec)) {
+ free(sss);
+ printf("sandbox_spi: unable to locate a slave client\n");
+ return NULL;
+ }
+
+ return &sss->slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ struct sandbox_spi_slave *sss = to_sandbox_spi_slave(slave);
+
+ debug("sandbox_spi: releasing slave\n");
+
+ if (sss->ops->free)
+ sss->ops->free(sss->priv);
+
+ free(sss);
+}
+
+static int spi_bus_claim_cnt[CONFIG_SANDBOX_SPI_MAX_BUS];
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ if (spi_bus_claim_cnt[slave->bus]++) {
+ printf("sandbox_spi: error: bus already claimed: %d!\n",
+ spi_bus_claim_cnt[slave->bus]);
+ }
+
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+ if (--spi_bus_claim_cnt[slave->bus]) {
+ printf("sandbox_spi: error: bus freed too often: %d!\n",
+ spi_bus_claim_cnt[slave->bus]);
+ }
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
+ void *din, unsigned long flags)
+{
+ struct sandbox_spi_slave *sss = to_sandbox_spi_slave(slave);
+ uint bytes = bitlen / 8, i;
+ int ret = 0;
+ u8 *tx = (void *)dout, *rx = din;
+
+ if (bitlen == 0)
+ goto done;
+
+ /* we can only do 8 bit transfers */
+ if (bitlen % 8) {
+ printf("sandbox_spi: xfer: invalid bitlen size %u; needs to be 8bit\n",
+ bitlen);
+ flags |= SPI_XFER_END;
+ goto done;
+ }
+
+ if (flags & SPI_XFER_BEGIN)
+ spi_cs_activate(slave);
+
+ /* make sure rx/tx buffers are full so clients can assume */
+ if (!tx) {
+ debug("sandbox_spi: xfer: auto-allocating tx scratch buffer\n");
+ tx = malloc(bytes);
+ if (!tx) {
+ debug("sandbox_spi: Out of memory\n");
+ return -ENOMEM;
+ }
+ }
+ if (!rx) {
+ debug("sandbox_spi: xfer: auto-allocating rx scratch buffer\n");
+ rx = malloc(bytes);
+ if (!rx) {
+ debug("sandbox_spi: Out of memory\n");
+ return -ENOMEM;
+ }
+ }
+
+ debug("sandbox_spi: xfer: bytes = %u\n tx:", bytes);
+ for (i = 0; i < bytes; ++i)
+ debug(" %u:%02x", i, tx[i]);
+ debug("\n");
+
+ ret = sss->ops->xfer(sss->priv, tx, rx, bytes);
+
+ debug("sandbox_spi: xfer: got back %i (that's %s)\n rx:",
+ ret, ret ? "bad" : "good");
+ for (i = 0; i < bytes; ++i)
+ debug(" %u:%02x", i, rx[i]);
+ debug("\n");
+
+ if (tx != dout)
+ free(tx);
+ if (rx != din)
+ free(rx);
+
+ done:
+ if (flags & SPI_XFER_END)
+ spi_cs_deactivate(slave);
+
+ return ret;
+}
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index b76a26cef05..7ddea9b026a 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -5,6 +5,7 @@
*/
#include <common.h>
+#include <fdtdec.h>
#include <malloc.h>
#include <spi.h>
@@ -37,3 +38,21 @@ void *spi_do_alloc_slave(int offset, int size, unsigned int bus,
return ptr;
}
+
+#ifdef CONFIG_OF_SPI
+struct spi_slave *spi_base_setup_slave_fdt(const void *blob, int busnum,
+ int node)
+{
+ int cs, max_hz, mode = 0;
+
+ cs = fdtdec_get_int(blob, node, "reg", -1);
+ max_hz = fdtdec_get_int(blob, node, "spi-max-frequency", 100000);
+ if (fdtdec_get_bool(blob, node, "spi-cpol"))
+ mode |= SPI_CPOL;
+ if (fdtdec_get_bool(blob, node, "spi-cpha"))
+ mode |= SPI_CPHA;
+ if (fdtdec_get_bool(blob, node, "spi-cs-high"))
+ mode |= SPI_CS_HIGH;
+ return spi_setup_slave(busnum, cs, max_hz, mode);
+}
+#endif
diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index 0155322a310..1e9c1e31185 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -276,6 +276,7 @@
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
#define CONFIG_SF_DEFAULT_SPEED 50000000
#define EXYNOS5_SPI_NUM_CONTROLLERS 5
+#define CONFIG_OF_SPI
#endif
#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index a4edc624bc6..7e78a231d7a 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -71,6 +71,16 @@
#define CONFIG_ENV_SIZE 8192
#define CONFIG_ENV_IS_NOWHERE
+/* SPI */
+#define CONFIG_SANDBOX_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SF_TEST
+#define CONFIG_CMD_SPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SANDBOX
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SPI_FLASH_WINBOND
+
/* Memory things - we don't really want a memory test */
#define CONFIG_SYS_LOAD_ADDR 0x00000000
#define CONFIG_SYS_MEMTEST_START 0x00100000
diff --git a/include/spi.h b/include/spi.h
index e2563c99f24..aba792244a8 100644
--- a/include/spi.h
+++ b/include/spi.h
@@ -259,13 +259,24 @@ static inline int spi_w8r8(struct spi_slave *slave, unsigned char byte)
* spi_free_slave() to free it later.
*
* @param blob: Device tree blob
- * @param node: SPI peripheral node to use
- * @param cs: Chip select to use
- * @param max_hz: Maximum SCK rate in Hz (0 for default)
- * @param mode: Clock polarity, clock phase and other parameters
+ * @param slave_node: Slave node to use
+ * @param spi_node: SPI peripheral node to use
* @return pointer to new spi_slave structure
*/
-struct spi_slave *spi_setup_slave_fdt(const void *blob, int node,
- unsigned int cs, unsigned int max_hz, unsigned int mode);
+struct spi_slave *spi_setup_slave_fdt(const void *blob, int slave_node,
+ int spi_node);
+
+/**
+ * spi_base_setup_slave_fdt() - helper function to set up a SPI slace
+ *
+ * This decodes SPI properties from the slave node to determine the
+ * chip select and SPI parameters.
+ *
+ * @blob: Device tree blob
+ * @busnum: Bus number to use
+ * @node: Device tree node for the SPI bus
+ */
+struct spi_slave *spi_base_setup_slave_fdt(const void *blob, int busnum,
+ int node);
#endif /* _SPI_H_ */
diff --git a/include/spi_flash.h b/include/spi_flash.h
index 25ca8f177b3..afc3a5809ea 100644
--- a/include/spi_flash.h
+++ b/include/spi_flash.h
@@ -67,6 +67,19 @@ struct spi_flash {
struct spi_flash *spi_flash_probe(unsigned int bus, unsigned int cs,
unsigned int max_hz, unsigned int spi_mode);
+
+/**
+ * Set up a new SPI flash from an fdt node
+ *
+ * @param blob Device tree blob
+ * @param slave_node Pointer to this SPI slave node in the device tree
+ * @param spi_node Cached pointer to the SPI interface this node belongs
+ * to
+ * @return 0 if ok, -1 on error
+ */
+struct spi_flash *spi_flash_probe_fdt(const void *blob, int slave_node,
+ int spi_node);
+
void spi_flash_free(struct spi_flash *flash);
static inline int spi_flash_read(struct spi_flash *flash, u32 offset,
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 12:42:28 +0000