aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--doc/board/ti/am62x_beagleplay.rst46
-rw-r--r--doc/board/ti/am62x_sk.rst18
-rw-r--r--doc/board/ti/am64x_evm.rst20
-rw-r--r--doc/board/ti/am65x_evm.rst104
-rw-r--r--doc/board/ti/j7200_evm.rst20
-rw-r--r--doc/board/ti/j721e_evm.rst40
-rw-r--r--doc/board/ti/j721s2_evm.rst18
7 files changed, 133 insertions, 133 deletions
diff --git a/doc/board/ti/am62x_beagleplay.rst b/doc/board/ti/am62x_beagleplay.rst
index 17738ea4f91..44e728de210 100644
--- a/doc/board/ti/am62x_beagleplay.rst
+++ b/doc/board/ti/am62x_beagleplay.rst
@@ -55,15 +55,15 @@ Set the variables corresponding to this platform:
.. include:: k3.rst
:start-after: .. k3_rst_include_start_common_env_vars_defn
:end-before: .. k3_rst_include_end_common_env_vars_defn
-.. code-block:: bash
+.. prompt:: bash $
- $ export UBOOT_CFG_CORTEXR="am62x_evm_r5_defconfig beagleplay_r5.config"
- $ export UBOOT_CFG_CORTEXA="am62x_evm_a53_defconfig beagleplay_a53.config"
- $ export TFA_BOARD=lite
- $ # we dont use any extra TFA parameters
- $ unset TFA_EXTRA_ARGS
- $ export OPTEE_PLATFORM=k3-am62x
- $ export OPTEE_EXTRA_ARGS="CFG_WITH_SOFTWARE_PRNG=y"
+ export UBOOT_CFG_CORTEXR="am62x_evm_r5_defconfig beagleplay_r5.config"
+ export UBOOT_CFG_CORTEXA="am62x_evm_a53_defconfig beagleplay_a53.config"
+ export TFA_BOARD=lite
+ # we dont use any extra TFA parameters
+ unset TFA_EXTRA_ARGS
+ export OPTEE_PLATFORM=k3-am62x
+ export OPTEE_EXTRA_ARGS="CFG_WITH_SOFTWARE_PRNG=y"
.. include:: am62x_sk.rst
:start-after: .. am62x_evm_rst_include_start_build_steps
@@ -174,24 +174,24 @@ boot1 partition depends on A/B update requirements.
The following are the steps from Linux shell to program eMMC:
-.. code-block:: bash
+.. prompt:: bash #
- # # Enable Boot0 boot
- # mmc bootpart enable 1 2 /dev/mmcblk0
- # mmc bootbus set single_backward x1 x8 /dev/mmcblk0
- # mmc hwreset enable /dev/mmcblk0
+ # Enable Boot0 boot
+ mmc bootpart enable 1 2 /dev/mmcblk0
+ mmc bootbus set single_backward x1 x8 /dev/mmcblk0
+ mmc hwreset enable /dev/mmcblk0
- # # Clear eMMC boot0
- # echo '0' >> /sys/class/block/mmcblk0boot0/force_ro
- # dd if=/dev/zero of=/dev/mmcblk0boot0 count=32 bs=128k
- # # Write tiboot3.bin
- # dd if=tiboot3.bin of=/dev/mmcblk0boot0 bs=128k
+ # Clear eMMC boot0
+ echo '0' >> /sys/class/block/mmcblk0boot0/force_ro
+ dd if=/dev/zero of=/dev/mmcblk0boot0 count=32 bs=128k
+ # Write tiboot3.bin
+ dd if=tiboot3.bin of=/dev/mmcblk0boot0 bs=128k
- # # Copy the rest of the boot binaries
- # mount /dev/mmcblk0p1 /boot/firmware
- # cp tispl.bin /boot/firmware
- # cp u-boot.img /boot/firmware
- # sync
+ # Copy the rest of the boot binaries
+ mount /dev/mmcblk0p1 /boot/firmware
+ cp tispl.bin /boot/firmware
+ cp u-boot.img /boot/firmware
+ sync
.. warning ::
diff --git a/doc/board/ti/am62x_sk.rst b/doc/board/ti/am62x_sk.rst
index 4703ce6f7ff..b12dc85f06b 100644
--- a/doc/board/ti/am62x_sk.rst
+++ b/doc/board/ti/am62x_sk.rst
@@ -76,15 +76,15 @@ Set the variables corresponding to this platform:
.. include:: ../ti/k3.rst
:start-after: .. k3_rst_include_start_common_env_vars_defn
:end-before: .. k3_rst_include_end_common_env_vars_defn
-.. code-block:: bash
+.. prompt:: bash $
- $ export UBOOT_CFG_CORTEXR=am62x_evm_r5_defconfig
- $ export UBOOT_CFG_CORTEXA=am62x_evm_a53_defconfig
- $ export TFA_BOARD=lite
- $ # we dont use any extra TFA parameters
- $ unset TFA_EXTRA_ARGS
- $ export OPTEE_PLATFORM=k3-am62x
- $ export OPTEE_EXTRA_ARGS="CFG_WITH_SOFTWARE_PRNG=y"
+ export UBOOT_CFG_CORTEXR=am62x_evm_r5_defconfig
+ export UBOOT_CFG_CORTEXA=am62x_evm_a53_defconfig
+ export TFA_BOARD=lite
+ # we dont use any extra TFA parameters
+ unset TFA_EXTRA_ARGS
+ export OPTEE_PLATFORM=k3-am62x
+ export OPTEE_EXTRA_ARGS="CFG_WITH_SOFTWARE_PRNG=y"
.. am62x_evm_rst_include_start_build_steps
@@ -271,6 +271,6 @@ detailed setup information.
To start OpenOCD and connect to the board
-.. code-block:: bash
+.. prompt:: bash $
openocd -f board/ti_am625evm.cfg
diff --git a/doc/board/ti/am64x_evm.rst b/doc/board/ti/am64x_evm.rst
index 69afee08f6e..6ae35b3fee3 100644
--- a/doc/board/ti/am64x_evm.rst
+++ b/doc/board/ti/am64x_evm.rst
@@ -65,16 +65,16 @@ Set the variables corresponding to this platform:
.. include:: k3.rst
:start-after: .. k3_rst_include_start_common_env_vars_defn
:end-before: .. k3_rst_include_end_common_env_vars_defn
-.. code-block:: bash
-
- $ export UBOOT_CFG_CORTEXR=am64x_evm_r5_defconfig
- $ export UBOOT_CFG_CORTEXA=am64x_evm_a53_defconfig
- $ export TFA_BOARD=lite
- $ # we dont use any extra TFA parameters
- $ unset TFA_EXTRA_ARGS
- $ export OPTEE_PLATFORM=k3-am64x
- $ # we dont use any extra TFA parameters
- $ unset OPTEE_EXTRA_ARGS
+.. prompt:: bash $
+
+ export UBOOT_CFG_CORTEXR=am64x_evm_r5_defconfig
+ export UBOOT_CFG_CORTEXA=am64x_evm_a53_defconfig
+ export TFA_BOARD=lite
+ # we dont use any extra TFA parameters
+ unset TFA_EXTRA_ARGS
+ export OPTEE_PLATFORM=k3-am64x
+ # we dont use any extra TFA parameters
+ unset OPTEE_EXTRA_ARGS
.. am64x_evm_rst_include_start_build_steps
diff --git a/doc/board/ti/am65x_evm.rst b/doc/board/ti/am65x_evm.rst
index 0e96e31a644..89011c08dd4 100644
--- a/doc/board/ti/am65x_evm.rst
+++ b/doc/board/ti/am65x_evm.rst
@@ -75,16 +75,16 @@ Set the variables corresponding to this platform:
.. include:: k3.rst
:start-after: .. k3_rst_include_start_common_env_vars_defn
:end-before: .. k3_rst_include_end_common_env_vars_defn
-.. code-block:: bash
+.. prompt:: bash $
- $ export UBOOT_CFG_CORTEXR=am65x_evm_r5_defconfig
- $ export UBOOT_CFG_CORTEXA=am65x_evm_a53_defconfig
- $ export TFA_BOARD=generic
- $ # we dont use any extra TFA parameters
- $ unset TFA_EXTRA_ARGS
- $ export OPTEE_PLATFORM=k3-am65x
- $ # we dont use any extra OP-TEE parameters
- $ unset OPTEE_EXTRA_ARGS
+ export UBOOT_CFG_CORTEXR=am65x_evm_r5_defconfig
+ export UBOOT_CFG_CORTEXA=am65x_evm_a53_defconfig
+ export TFA_BOARD=generic
+ # we dont use any extra TFA parameters
+ unset TFA_EXTRA_ARGS
+ export OPTEE_PLATFORM=k3-am65x
+ # we dont use any extra OP-TEE parameters
+ unset OPTEE_EXTRA_ARGS
.. am65x_evm_rst_include_start_build_steps
@@ -160,32 +160,32 @@ The following commands can be used to download tiboot3.bin, tispl.bin,
u-boot.img, and sysfw.itb from an SD card and write them to the eMMC boot0
partition at respective addresses.
-.. code-block:: text
+.. prompt:: bash =>
- => mmc dev 0 1
- => fatload mmc 1 ${loadaddr} tiboot3.bin
- => mmc write ${loadaddr} 0x0 0x400
- => fatload mmc 1 ${loadaddr} tispl.bin
- => mmc write ${loadaddr} 0x400 0x1000
- => fatload mmc 1 ${loadaddr} u-boot.img
- => mmc write ${loadaddr} 0x1400 0x2000
- => fatload mmc 1 ${loadaddr} sysfw.itb
- => mmc write ${loadaddr} 0x3600 0x800
+ mmc dev 0 1
+ fatload mmc 1 ${loadaddr} tiboot3.bin
+ mmc write ${loadaddr} 0x0 0x400
+ fatload mmc 1 ${loadaddr} tispl.bin
+ mmc write ${loadaddr} 0x400 0x1000
+ fatload mmc 1 ${loadaddr} u-boot.img
+ mmc write ${loadaddr} 0x1400 0x2000
+ fatload mmc 1 ${loadaddr} sysfw.itb
+ mmc write ${loadaddr} 0x3600 0x800
To give the ROM access to the boot partition, the following commands must be
used for the first time:
-.. code-block:: text
+.. prompt:: bash =>
- => mmc partconf 0 1 1 1
- => mmc bootbus 0 1 0 0
+ mmc partconf 0 1 1 1
+ mmc bootbus 0 1 0 0
To create a software partition for the rootfs, the following command can be
used:
-.. code-block:: text
+.. prompt:: bash =>
- => gpt write mmc 0 ${partitions}
+ gpt write mmc 0 ${partitions}
eMMC layout:
@@ -195,11 +195,11 @@ eMMC layout:
Kernel image and DT are expected to be present in the /boot folder of rootfs.
To boot kernel from eMMC, use the following commands:
-.. code-block:: text
+.. prompt:: bash =>
- => setenv mmcdev 0
- => setenv bootpart 0
- => boot
+ setenv mmcdev 0
+ setenv bootpart 0
+ boot
OSPI:
-----
@@ -211,17 +211,17 @@ Below commands can be used to download tiboot3.bin, tispl.bin, u-boot.img,
and sysfw.itb over tftp and then flash those to OSPI at their respective
addresses.
-.. code-block:: text
+.. prompt:: bash =>
- => sf probe
- => tftp ${loadaddr} tiboot3.bin
- => sf update $loadaddr 0x0 $filesize
- => tftp ${loadaddr} tispl.bin
- => sf update $loadaddr 0x80000 $filesize
- => tftp ${loadaddr} u-boot.img
- => sf update $loadaddr 0x280000 $filesize
- => tftp ${loadaddr} sysfw.itb
- => sf update $loadaddr 0x6C0000 $filesize
+ sf probe
+ tftp ${loadaddr} tiboot3.bin
+ sf update $loadaddr 0x0 $filesize
+ tftp ${loadaddr} tispl.bin
+ sf update $loadaddr 0x80000 $filesize
+ tftp ${loadaddr} u-boot.img
+ sf update $loadaddr 0x280000 $filesize
+ tftp ${loadaddr} sysfw.itb
+ sf update $loadaddr 0x6C0000 $filesize
Flash layout for OSPI:
@@ -234,10 +234,10 @@ ospi.rootfs just like in SD card case. U-Boot looks for UBI volume named
To boot kernel from OSPI, at the U-Boot prompt:
-.. code-block:: text
+.. prompt:: bash =>
- => setenv boot ubi
- => boot
+ setenv boot ubi
+ boot
UART:
-----
@@ -281,19 +281,19 @@ is fully loaded (from sysfw.itb) and started.
Example bash script sequence for running on a Linux host PC feeding all boot
artifacts needed to the device:
-.. code-block:: text
+.. prompt:: bash $
- MCU_DEV=/dev/ttyUSB1
- MAIN_DEV=/dev/ttyUSB0
+ MCU_DEV=/dev/ttyUSB1
+ MAIN_DEV=/dev/ttyUSB0
- stty -F $MCU_DEV 115200 cs8 -cstopb -parenb
- stty -F $MAIN_DEV 115200 cs8 -cstopb -parenb
+ stty -F $MCU_DEV 115200 cs8 -cstopb -parenb
+ stty -F $MAIN_DEV 115200 cs8 -cstopb -parenb
- sb --xmodem tiboot3.bin > $MCU_DEV < $MCU_DEV
- sb --ymodem sysfw.itb > $MCU_DEV < $MCU_DEV
- sb --ymodem tispl.bin > $MAIN_DEV < $MAIN_DEV
- sleep 1
- sb --xmodem u-boot.img > $MAIN_DEV < $MAIN_DEV
+ sb --xmodem tiboot3.bin > $MCU_DEV < $MCU_DEV
+ sb --ymodem sysfw.itb > $MCU_DEV < $MCU_DEV
+ sb --ymodem tispl.bin > $MAIN_DEV < $MAIN_DEV
+ sleep 1
+ sb --xmodem u-boot.img > $MAIN_DEV < $MAIN_DEV
Debugging U-Boot
----------------
@@ -315,6 +315,6 @@ detailed setup information.
To start OpenOCD and connect to the board
-.. code-block:: bash
+.. prompt:: bash $
openocd -f board/ti_am654evm.cfg
diff --git a/doc/board/ti/j7200_evm.rst b/doc/board/ti/j7200_evm.rst
index 5653c2e4c8d..d4a823fa26c 100644
--- a/doc/board/ti/j7200_evm.rst
+++ b/doc/board/ti/j7200_evm.rst
@@ -64,16 +64,16 @@ Set the variables corresponding to this platform:
.. include:: k3.rst
:start-after: .. k3_rst_include_start_common_env_vars_defn
:end-before: .. k3_rst_include_end_common_env_vars_defn
-.. code-block:: bash
+.. prompt:: bash $
- $ export UBOOT_CFG_CORTEXR=j7200_evm_r5_defconfig
- $ export UBOOT_CFG_CORTEXA=j7200_evm_a72_defconfig
- $ export TFA_BOARD=generic
- $ # we dont use any extra TFA parameters
- $ unset TFA_EXTRA_ARGS
- $ export OPTEE_PLATFORM=k3-j721e
- $ # we dont use any extra OP-TEE parameters
- $ unset OPTEE_EXTRA_ARGS
+ export UBOOT_CFG_CORTEXR=j7200_evm_r5_defconfig
+ export UBOOT_CFG_CORTEXA=j7200_evm_a72_defconfig
+ export TFA_BOARD=generic
+ # we dont use any extra TFA parameters
+ unset TFA_EXTRA_ARGS
+ export OPTEE_PLATFORM=k3-j7200
+ # we dont use any extra OP-TEE parameters
+ unset OPTEE_EXTRA_ARGS
.. j7200_evm_rst_include_start_build_steps
@@ -226,6 +226,6 @@ detailed setup information.
To start OpenOCD and connect to the board
-.. code-block:: bash
+.. prompt:: bash $
openocd -f board/ti_j7200evm.cfg
diff --git a/doc/board/ti/j721e_evm.rst b/doc/board/ti/j721e_evm.rst
index 5f14e4528b9..113475d7c9d 100644
--- a/doc/board/ti/j721e_evm.rst
+++ b/doc/board/ti/j721e_evm.rst
@@ -69,16 +69,16 @@ Set the variables corresponding to this platform:
.. include:: k3.rst
:start-after: .. k3_rst_include_start_common_env_vars_defn
:end-before: .. k3_rst_include_end_common_env_vars_defn
-.. code-block:: bash
+.. prompt:: bash $
- $ export UBOOT_CFG_CORTEXR=j721e_evm_r5_defconfig
- $ export UBOOT_CFG_CORTEXA=j721e_evm_a72_defconfig
- $ export TFA_BOARD=generic
- $ # we dont use any extra TFA parameters
- $ unset TFA_EXTRA_ARGS
- $ export OPTEE_PLATFORM=k3-j721e
- $ # we dont use any extra OP-TEE parameters
- $ unset OPTEE_EXTRA_ARGS
+ export UBOOT_CFG_CORTEXR=j721e_evm_r5_defconfig
+ export UBOOT_CFG_CORTEXA=j721e_evm_a72_defconfig
+ export TFA_BOARD=generic
+ # we dont use any extra TFA parameters
+ unset TFA_EXTRA_ARGS
+ export OPTEE_PLATFORM=k3-j721e
+ # we dont use any extra OP-TEE parameters
+ unset OPTEE_EXTRA_ARGS
.. j721e_evm_rst_include_start_build_steps
@@ -203,17 +203,17 @@ Below commands can be used to download tiboot3.bin, tispl.bin, u-boot.img,
and sysfw.itb over tftp and then flash those to OSPI at their respective
addresses.
-.. code-block:: text
+.. prompt:: bash =>
- => sf probe
- => tftp ${loadaddr} tiboot3.bin
- => sf update $loadaddr 0x0 $filesize
- => tftp ${loadaddr} tispl.bin
- => sf update $loadaddr 0x80000 $filesize
- => tftp ${loadaddr} u-boot.img
- => sf update $loadaddr 0x280000 $filesize
- => tftp ${loadaddr} sysfw.itb
- => sf update $loadaddr 0x6C0000 $filesize
+ sf probe
+ tftp ${loadaddr} tiboot3.bin
+ sf update $loadaddr 0x0 $filesize
+ tftp ${loadaddr} tispl.bin
+ sf update $loadaddr 0x80000 $filesize
+ tftp ${loadaddr} u-boot.img
+ sf update $loadaddr 0x280000 $filesize
+ tftp ${loadaddr} sysfw.itb
+ sf update $loadaddr 0x6C0000 $filesize
Flash layout for OSPI:
@@ -255,6 +255,6 @@ detailed setup information.
To start OpenOCD and connect to the board
-.. code-block:: bash
+.. prompt:: bash $
openocd -f board/ti_j721eevm.cfg
diff --git a/doc/board/ti/j721s2_evm.rst b/doc/board/ti/j721s2_evm.rst
index 5fbe6088444..f5c48c96a83 100644
--- a/doc/board/ti/j721s2_evm.rst
+++ b/doc/board/ti/j721s2_evm.rst
@@ -78,15 +78,15 @@ Set the variables corresponding to this platform:
.. include:: k3.rst
:start-after: .. k3_rst_include_start_common_env_vars_defn
:end-before: .. k3_rst_include_end_common_env_vars_defn
-.. code-block:: bash
+.. prompt:: bash $
- $ export UBOOT_CFG_CORTEXR=j721s2_evm_r5_defconfig
- $ export UBOOT_CFG_CORTEXA=j721s2_evm_a72_defconfig
- $ export TFA_BOARD=generic
- $ export TFA_EXTRA_ARGS="K3_USART=0x8"
- $ # The following is not a typo, j784s4 is the OP-TEE platform for j721s2
- $ export OPTEE_PLATFORM=k3-j784s4
- $ export OPTEE_EXTRA_ARGS="CFG_CONSOLE_UART=0x8"
+ export UBOOT_CFG_CORTEXR=j721s2_evm_r5_defconfig
+ export UBOOT_CFG_CORTEXA=j721s2_evm_a72_defconfig
+ export TFA_BOARD=generic
+ export TFA_EXTRA_ARGS="K3_USART=0x8"
+ # The following is not a typo, j784s4 is the OP-TEE platform for j721s2
+ export OPTEE_PLATFORM=k3-j784s4
+ export OPTEE_EXTRA_ARGS="CFG_CONSOLE_UART=0x8"
.. j721s2_evm_rst_include_start_build_steps
@@ -300,7 +300,7 @@ Debugging U-Boot on J721S2-EVM
To start OpenOCD and connect to the board
-.. code-block:: bash
+.. prompt:: bash $
openocd -f board/ti_j721s2evm.cfg
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 15:02:00 +0000