diff options
163 files changed, 361 insertions, 352 deletions
@@ -2045,6 +2045,9 @@ Configuration Settings: - CONFIG_SYS_LONGHELP: Defined when you want long help messages included; undefine this when you're short of memory. +- CONFIG_SYS_HELP_CMD_WIDTH: Defined when you want to override the default + width of the commands listed in the 'help' command output. + - CONFIG_SYS_PROMPT: This is what U-Boot prints on the console to prompt for user input. diff --git a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c index 753d85b1b20..02a095ef8df 100644 --- a/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c +++ b/board/BuS/EB+MCF-EV123/EB+MCF-EV123.c @@ -155,7 +155,7 @@ int do_vcimage (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( vcimage, 2, 0, do_vcimage, - "vcimage - loads an image to Display\n", + "loads an image to Display", "vcimage addr\n" ); diff --git a/board/MAI/AmigaOneG3SE/cmd_boota.c b/board/MAI/AmigaOneG3SE/cmd_boota.c index 949af180254..6b955d83521 100644 --- a/board/MAI/AmigaOneG3SE/cmd_boota.c +++ b/board/MAI/AmigaOneG3SE/cmd_boota.c @@ -122,7 +122,7 @@ int do_boota (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) #if defined(CONFIG_AMIGAONEG3SE) && defined(CONFIG_CMD_BSP) U_BOOT_CMD( boota, 3, 1, do_boota, - "boota - boot an Amiga kernel\n", + "boot an Amiga kernel", "address disk" ); #endif /* _CMD_BOOTA_H */ diff --git a/board/MAI/menu/cmd_menu.c b/board/MAI/menu/cmd_menu.c index 079f1ff16ef..2b97d23213c 100644 --- a/board/MAI/menu/cmd_menu.c +++ b/board/MAI/menu/cmd_menu.c @@ -10,7 +10,7 @@ int do_menu( cmd_tbl_t *cmdtp, /*bd_t *bd,*/ int flag, int argc, char *argv[] ) #if defined(CONFIG_AMIGAONEG3SE) && defined(CONFIG_CMD_BSP) U_BOOT_CMD( menu, 1, 1, do_menu, - "menu - display BIOS setup menu\n", + "display BIOS setup menu", "" ); #endif diff --git a/board/ads5121/ads5121_diu.c b/board/ads5121/ads5121_diu.c index 11e2be781f4..4f7dda0e3e7 100644 --- a/board/ads5121/ads5121_diu.c +++ b/board/ads5121/ads5121_diu.c @@ -101,7 +101,7 @@ int ads5121diu_init_show_bmp(cmd_tbl_t *cmdtp, U_BOOT_CMD( diufb, CONFIG_SYS_MAXARGS, 1, ads5121diu_init_show_bmp, - "diufb - Init or Display BMP file\n", + "Init or Display BMP file", "init\n - initialize DIU\n" "addr\n - display bmp at address 'addr'\n" ); diff --git a/board/amcc/acadia/cmd_acadia.c b/board/amcc/acadia/cmd_acadia.c index 9fc03f106cb..d47cf1af574 100644 --- a/board/amcc/acadia/cmd_acadia.c +++ b/board/amcc/acadia/cmd_acadia.c @@ -96,6 +96,6 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( bootstrap, 3, 0, do_bootstrap, - "bootstrap - program the I2C bootstrap EEPROM\n", + "program the I2C bootstrap EEPROM", "<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM\n" ); diff --git a/board/amcc/canyonlands/bootstrap.c b/board/amcc/canyonlands/bootstrap.c index 35284d17942..30046fee3ab 100644 --- a/board/amcc/canyonlands/bootstrap.c +++ b/board/amcc/canyonlands/bootstrap.c @@ -190,6 +190,6 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( bootstrap, 2, 0, do_bootstrap, - "bootstrap - program the I2C bootstrap EEPROM\n", + "program the I2C bootstrap EEPROM", "<nand|nor> - strap to boot from NAND or NOR flash\n" ); diff --git a/board/amcc/katmai/cmd_katmai.c b/board/amcc/katmai/cmd_katmai.c index d3626556639..2c2849b015a 100644 --- a/board/amcc/katmai/cmd_katmai.c +++ b/board/amcc/katmai/cmd_katmai.c @@ -213,6 +213,6 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( bootstrap, 3, 1, do_bootstrap, - "bootstrap - program the serial device strap\n", + "program the serial device strap", "wrclk [prom0|prom1] - program the serial device strap\n" ); diff --git a/board/amcc/kilauea/cmd_pll.c b/board/amcc/kilauea/cmd_pll.c index 3b49e5b37ad..6b38493e59c 100644 --- a/board/amcc/kilauea/cmd_pll.c +++ b/board/amcc/kilauea/cmd_pll.c @@ -237,7 +237,7 @@ ret: U_BOOT_CMD( pllalter, CONFIG_SYS_MAXARGS, 1, do_pll_alter, - "pllalter- change pll frequence \n", + "change pll frequence", "pllalter <selection> - change pll frequence \n\n\ ** New freq take effect after reset. ** \n\ ----------------------------------------------\n\ diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c index e1357f404b1..d2a3b9ec3d4 100644 --- a/board/amcc/luan/luan.c +++ b/board/amcc/luan/luan.c @@ -329,7 +329,7 @@ int do_l2cache( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] ) U_BOOT_CMD( l2cache, 2, 1, do_l2cache, - "l2cache - enable or disable L2 cache\n", + "enable or disable L2 cache", "[on, off]\n" " - enable or disable L2 cache\n" ); diff --git a/board/amcc/makalu/cmd_pll.c b/board/amcc/makalu/cmd_pll.c index 3b49e5b37ad..6b38493e59c 100644 --- a/board/amcc/makalu/cmd_pll.c +++ b/board/amcc/makalu/cmd_pll.c @@ -237,7 +237,7 @@ ret: U_BOOT_CMD( pllalter, CONFIG_SYS_MAXARGS, 1, do_pll_alter, - "pllalter- change pll frequence \n", + "change pll frequence", "pllalter <selection> - change pll frequence \n\n\ ** New freq take effect after reset. ** \n\ ----------------------------------------------\n\ diff --git a/board/amcc/sequoia/cmd_sequoia.c b/board/amcc/sequoia/cmd_sequoia.c index c840748d43d..6dfd8ba381f 100644 --- a/board/amcc/sequoia/cmd_sequoia.c +++ b/board/amcc/sequoia/cmd_sequoia.c @@ -226,6 +226,6 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( bootstrap, 2, 0, do_bootstrap, - "bootstrap - program the I2C bootstrap EEPROM\n", + "program the I2C bootstrap EEPROM", "<nand|nor> - strap to boot from NAND or NOR flash\n" ); diff --git a/board/amcc/taihu/lcd.c b/board/amcc/taihu/lcd.c index 7cc094abecc..6b68f335634 100644 --- a/board/amcc/taihu/lcd.c +++ b/board/amcc/taihu/lcd.c @@ -232,25 +232,25 @@ static int do_lcd_cur (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( lcd_cls, 1, 1, do_lcd_clear, - "lcd_cls - lcd clear display\n", + "lcd clear display", NULL ); U_BOOT_CMD( lcd_puts, 2, 1, do_lcd_puts, - "lcd_puts - display string on lcd\n", + "display string on lcd", "<string> - <string> to be displayed\n" ); U_BOOT_CMD( lcd_putc, 2, 1, do_lcd_putc, - "lcd_putc - display char on lcd\n", + "display char on lcd", "<char> - <char> to be displayed\n" ); U_BOOT_CMD( lcd_cur, 3, 1, do_lcd_cur, - "lcd_cur - shift cursor on lcd\n", + "shift cursor on lcd", "<count> <dir> - shift cursor on lcd <count> times, direction is <dir> \n" " <count> - 0..31\n" " <dir> - 0=backward 1=forward\n" diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c index a98c186a8b2..522437805bf 100644 --- a/board/amcc/taihu/taihu.c +++ b/board/amcc/taihu/taihu.c @@ -93,7 +93,7 @@ static int do_sw_stat(cmd_tbl_t* cmd_tp, int flags, int argc, char *argv[]) U_BOOT_CMD ( sw2_stat, 1, 1, do_sw_stat, - "sw2_stat - show status of switch 2\n", + "show status of switch 2", NULL ); @@ -132,7 +132,7 @@ static int do_led_ctl(cmd_tbl_t* cmd_tp, int flags, int argc, char *argv[]) U_BOOT_CMD ( led_ctl, 3, 1, do_led_ctl, - "led_ctl - make led 1 or 2 on or off\n", + "make led 1 or 2 on or off", "<led_no> <on/off> - make led <led_no> on/off,\n" "\tled_no is 1 or 2\t" ); diff --git a/board/amcc/taihu/update.c b/board/amcc/taihu/update.c index 52bad56bfd6..8e969056cc9 100644 --- a/board/amcc/taihu/update.c +++ b/board/amcc/taihu/update.c @@ -127,6 +127,6 @@ static int update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char *argv[] U_BOOT_CMD ( update_boot_eeprom, 1, 1, update_boot_eeprom, - "update_boot_eeprom - update boot eeprom content\n", + "update boot eeprom content", NULL ); diff --git a/board/amcc/taishan/lcd.c b/board/amcc/taishan/lcd.c index 4e14bbc9ae1..e4d070570aa 100644 --- a/board/amcc/taishan/lcd.c +++ b/board/amcc/taishan/lcd.c @@ -254,16 +254,16 @@ static int do_lcd_cur(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) return 0; } -U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd_test - lcd test display\n", NULL); -U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd_cls - lcd clear display\n", NULL); +U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd test display", NULL); +U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd clear display", NULL); U_BOOT_CMD(lcd_puts, 2, 1, do_lcd_puts, - "lcd_puts - display string on lcd\n", + "display string on lcd", "<string> - <string> to be displayed\n"); U_BOOT_CMD(lcd_putc, 2, 1, do_lcd_putc, - "lcd_putc - display char on lcd\n", + "display char on lcd", "<char> - <char> to be displayed\n"); U_BOOT_CMD(lcd_cur, 3, 1, do_lcd_cur, - "lcd_cur - shift cursor on lcd\n", + "shift cursor on lcd", "<count> <dir>- shift cursor on lcd <count> times, direction is <dir> \n" " <count> - 0~31\n" " <dir> - 0,backward; 1, forward\n"); @@ -373,8 +373,8 @@ static int do_led_test_on(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(ledon, 1, 1, do_led_test_on, - "ledon - led test light on\n", NULL); + "led test light on", NULL); U_BOOT_CMD(ledoff, 1, 1, do_led_test_off, - "ledoff - led test light off\n", NULL); + "led test light off", NULL); #endif diff --git a/board/amcc/taishan/showinfo.c b/board/amcc/taishan/showinfo.c index 5b8b88e856b..b471c956e4e 100644 --- a/board/amcc/taishan/showinfo.c +++ b/board/amcc/taishan/showinfo.c @@ -168,7 +168,7 @@ int do_show_xbridge_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(xbriinfo, 1, 1, do_show_xbridge_info, - "xbriinfo - Show PCIX bridge info\n", NULL); + "Show PCIX bridge info", NULL); #define TAISHAN_PCI_DEV_ID0 0x800 #define TAISHAN_PCI_DEV_ID1 0x1000 @@ -222,7 +222,7 @@ int do_show_pcix_device_info(cmd_tbl_t * cmdtp, int flag, int argc, } U_BOOT_CMD(xdevinfo, 1, 1, do_show_pcix_device_info, - "xdevinfo - Show PCIX Device info\n", NULL); + "Show PCIX Device info", NULL); extern void show_reset_reg(void); @@ -233,4 +233,4 @@ int do_show_reset_reg_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(resetinfo, 1, 1, do_show_reset_reg_info, - "resetinfo - Show Reset REG info\n", NULL); + "Show Reset REG info", NULL); diff --git a/board/amcc/taishan/update.c b/board/amcc/taishan/update.c index 96b918be0ba..63f874488e6 100644 --- a/board/amcc/taishan/update.c +++ b/board/amcc/taishan/update.c @@ -74,5 +74,5 @@ int do_update_boot_eeprom(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(update_boot_eeprom, 1, 1, do_update_boot_eeprom, - "update_boot_eeprom - update bootstrap eeprom content\n", NULL); + "update bootstrap eeprom content", NULL); #endif diff --git a/board/amcc/yucca/cmd_yucca.c b/board/amcc/yucca/cmd_yucca.c index 5198317dd25..d2ca2572d7d 100644 --- a/board/amcc/yucca/cmd_yucca.c +++ b/board/amcc/yucca/cmd_yucca.c @@ -281,6 +281,6 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag, U_BOOT_CMD( evb440spe, 3, 1, do_evb440spe, - "evb440spe - program the serial device strap\n", + "program the serial device strap", "wrclk [prom0|prom1] - program the serial device strap\n" ); diff --git a/board/amirix/ap1000/ap1000.c b/board/amirix/ap1000/ap1000.c index e9f80ff5cee..fcf26984ff5 100644 --- a/board/amirix/ap1000/ap1000.c +++ b/board/amirix/ap1000/ap1000.c @@ -659,7 +659,7 @@ done: } U_BOOT_CMD (temp, 6, 0, do_temp_sensor, - "temp - interact with the temperature sensor\n", + "interact with the temperature sensor", "temp [s]\n" " - Show status.\n" "temp l LOW [HIGH] [THERM]\n" @@ -674,28 +674,28 @@ U_BOOT_CMD (temp, 6, 0, do_temp_sensor, #if 0 U_BOOT_CMD (loadace, 2, 0, do_loadace, - "loadace - load fpga configuration from System ACE compact flash\n", + "load fpga configuration from System ACE compact flash", "N\n" " - Load configuration N (0-7) from System ACE compact flash\n" "loadace\n" " - loads default configuration\n"); #endif U_BOOT_CMD (swconfig, 2, 0, do_swconfigbyte, - "swconfig- display or modify the software configuration byte\n", + "display or modify the software configuration byte", "N [ADDRESS]\n" " - set software configuration byte to N, optionally use ADDRESS as\n" " location of buffer for flash copy\n" "swconfig\n" " - display software configuration byte\n"); U_BOOT_CMD (pause, 2, 0, do_pause, - "pause - sleep processor until any key is pressed with poll time of N seconds\n", + "sleep processor until any key is pressed with poll time of N seconds", "N\n" " - sleep processor until any key is pressed with poll time of N seconds\n" "pause\n" " - sleep processor until any key is pressed with poll time of 1 second\n"); U_BOOT_CMD (swrecon, 1, 0, do_swreconfig, - "swrecon - trigger a board reconfigure to the software selected configuration\n", + "trigger a board reconfigure to the software selected configuration", "\n" " - trigger a board reconfigure to the software selected configuration\n"); diff --git a/board/amirix/ap1000/powerspan.c b/board/amirix/ap1000/powerspan.c index f0481553f07..f727061df7b 100644 --- a/board/amirix/ap1000/powerspan.c +++ b/board/amirix/ap1000/powerspan.c @@ -478,7 +478,7 @@ int do_eeprom (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD (eeprom, 4, 0, do_eeprom, - "eeprom - read/write/copy to/from the PowerSpan II eeprom\n", + "read/write/copy to/from the PowerSpan II eeprom", "eeprom r OFF [NUM]\n" " - read NUM words starting at OFF\n" "eeprom w OFF VAL\n" diff --git a/board/barco/barco.c b/board/barco/barco.c index e3abca4cffd..a19e1edabb2 100644 --- a/board/barco/barco.c +++ b/board/barco/barco.c @@ -306,19 +306,19 @@ int barcobcd_boot_image (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD ( try_working, 1, 1, barcobcd_boot_image, - " try_working - check flash value and boot the appropriate image\n", + "check flash value and boot the appropriate image", "\n" ); U_BOOT_CMD ( boot_working, 1, 1, barcobcd_boot_image, - " boot_working - check flash value and boot the appropriate image\n", + "check flash value and boot the appropriate image", "\n" ); U_BOOT_CMD ( boot_default, 1, 1, barcobcd_boot_image, - " boot_default - check flash value and boot the appropriate image\n", + "check flash value and boot the appropriate image", "\n" ); /* diff --git a/board/bc3450/cmd_bc3450.c b/board/bc3450/cmd_bc3450.c index ae5061f94b3..aa46e5812f2 100644 --- a/board/bc3450/cmd_bc3450.c +++ b/board/bc3450/cmd_bc3450.c @@ -194,7 +194,7 @@ int cmd_dip (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD (dip, 1, 1, cmd_dip, - "dip - read dip switch and config inputs\n", + "read dip switch and config inputs", "\n" " - prints the state of the dip switch and/or\n" " external configuration inputs as hex value.\n" @@ -228,7 +228,7 @@ static int cmd_buz (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD (buz, 2, 1, cmd_buz, - "buz - turns buzzer on/off\n", + "turns buzzer on/off", "\n" "buz <on/off>\n" " - turns the buzzer on or off\n"); #endif /* CONFIG_BC3450_BUZZER */ @@ -322,7 +322,7 @@ static int cmd_fp (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD (fp, 3, 1, cmd_fp, - "fp - front panes access functions\n", + "front panes access functions", "\n" "fp bl <on/off>\n" " - turns the CCFL backlight of the display on/off\n" @@ -523,7 +523,7 @@ static int cmd_temp (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD (temp, 3, 1, cmd_temp, - "temp - print current temperature\n", + "print current temperature", "\n" "temp\n" " - print current temperature\n"); #ifdef CONFIG_BC3450_CAN @@ -816,7 +816,7 @@ int cmd_test (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) return 1; } -U_BOOT_CMD (test, 2, 1, cmd_test, "test - unit test routines\n", "\n" +U_BOOT_CMD (test, 2, 1, cmd_test, "unit test routines", "\n" #ifdef CONFIG_BC3450_CAN "test can\n" " - connect CAN1 (X8) with CAN2 (X9) for this test\n" diff --git a/board/bf537-stamp/cmd_bf537led.c b/board/bf537-stamp/cmd_bf537led.c index fa650f26fe4..e77bb0cb19a 100644 --- a/board/bf537-stamp/cmd_bf537led.c +++ b/board/bf537-stamp/cmd_bf537led.c @@ -196,6 +196,6 @@ void show_cmd_usage() /* Register information for u-boot to find this command */ U_BOOT_CMD(led, 3, 1, do_bf537led, - "led- Control BF537 stamp LEDs\n", USAGE_LONG); + "Control BF537 stamp LEDs", USAGE_LONG); #endif diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c index 00f0671d785..52f031cbb2a 100644 --- a/board/cm5200/cmd_cm5200.c +++ b/board/cm5200/cmd_cm5200.c @@ -435,7 +435,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( fkt, 4, 1, cmd_fkt, - "fkt - Function test routines\n", + "Function test routines", "i2c\n" " - Test I2C communication\n" "fkt led\n" diff --git a/board/delta/delta.c b/board/delta/delta.c index 878416f73dc..73e6c3e3747 100644 --- a/board/delta/delta.c +++ b/board/delta/delta.c @@ -259,7 +259,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( kbd, 1, 1, do_kbd, - "kbd - read keyboard status\n", + "read keyboard status", NULL ); diff --git a/board/esd/ar405/ar405.c b/board/esd/ar405/ar405.c index 3abcfe690e9..c4b4b676703 100644 --- a/board/esd/ar405/ar405.c +++ b/board/esd/ar405/ar405.c @@ -247,7 +247,7 @@ int do_digtest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( digtest, 3, 1, do_digtest, - "digtest - Test digital in-/output\n", + "Test digital in-/output", NULL ); @@ -341,7 +341,7 @@ int do_anatest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( anatest, 2, 1, do_anatest, - "anatest - Test analog in-/output\n", + "Test analog in-/output", NULL ); @@ -408,7 +408,7 @@ int do_inctest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( inctest, 3, 1, do_inctest, - "inctest - Test incremental encoder inputs\n", + "Test incremental encoder inputs", NULL ); #endif diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c index 5709d450471..d0ee1932982 100644 --- a/board/esd/cms700/cms700.c +++ b/board/esd/cms700/cms700.c @@ -198,7 +198,7 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, - "eepwren - Enable / disable / query EEPROM write access\n", + "Enable / disable / query EEPROM write access", NULL); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ diff --git a/board/esd/common/auto_update.c b/board/esd/common/auto_update.c index 633f64178e6..4ea373a7c0d 100644 --- a/board/esd/common/auto_update.c +++ b/board/esd/common/auto_update.c @@ -550,7 +550,7 @@ int auto_update(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( autoupd, 1, 1, auto_update, - "autoupd - Automatically update images\n", + "Automatically update images", NULL ); #endif /* CONFIG_AUTO_UPDATE */ diff --git a/board/esd/common/cmd_loadpci.c b/board/esd/common/cmd_loadpci.c index ad490c3494c..0a6626e0716 100644 --- a/board/esd/common/cmd_loadpci.c +++ b/board/esd/common/cmd_loadpci.c @@ -123,7 +123,7 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( loadpci, 1, 1, do_loadpci, - "loadpci - Wait for pci bootcmd and boot it\n", + "Wait for pci bootcmd and boot it", NULL ); diff --git a/board/esd/common/lcd.c b/board/esd/common/lcd.c index 1db8d9058a9..066df74bf38 100644 --- a/board/esd/common/lcd.c +++ b/board/esd/common/lcd.c @@ -372,6 +372,6 @@ int do_esdbmp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( esdbmp, 2, 1, do_esdbmp, - "esdbmp - display BMP image\n", + "display BMP image", "<imageAddr> - display image\n" ); diff --git a/board/esd/common/xilinx_jtag/micro.c b/board/esd/common/xilinx_jtag/micro.c index 318f229feb7..9b2cf90d431 100644 --- a/board/esd/common/xilinx_jtag/micro.c +++ b/board/esd/common/xilinx_jtag/micro.c @@ -1859,6 +1859,6 @@ int do_cpld(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( cpld, 1, 1, do_cpld, - "cpld - Program onboard CPLD\n", + "Program onboard CPLD", NULL ); diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c index dcab9060b66..517b1740a43 100644 --- a/board/esd/cpci2dp/cpci2dp.c +++ b/board/esd/cpci2dp/cpci2dp.c @@ -176,7 +176,7 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( eepwren, 2, 0, do_eep_wren, - "eepwren - Enable / disable / query EEPROM write access\n", + "Enable / disable / query EEPROM write access", NULL ); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c index bd569a62971..0aca825c12a 100644 --- a/board/esd/cpci405/cpci405.c +++ b/board/esd/cpci405/cpci405.c @@ -689,7 +689,7 @@ int do_onewire(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( onewire, 1, 1, do_onewire, - "onewire - Read 1-write ID\n", + "Read 1-write ID", NULL ); @@ -750,7 +750,7 @@ int do_get_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( getbpip, 1, 1, do_get_bpip, - "getbpip - Update IP-Address with Backplane IP-Address\n", + "Update IP-Address with Backplane IP-Address", NULL ); @@ -786,7 +786,7 @@ int do_set_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( setbpip, 2, 1, do_set_bpip, - "setbpip - Write Backplane IP-Address\n", + "Write Backplane IP-Address", NULL ); diff --git a/board/esd/cpci5200/cpci5200.c b/board/esd/cpci5200/cpci5200.c index 6eedb83ff15..b6b50fb46e1 100644 --- a/board/esd/cpci5200/cpci5200.c +++ b/board/esd/cpci5200/cpci5200.c @@ -294,5 +294,5 @@ int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(writepci, 3, 1, do_writepci, - "writepci- Write some data to pcibus\n", + "Write some data to pcibus", "<addr> <size>\n" " - Write some data to pcibus.\n"); diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c index 70bae60c68d..482663398aa 100644 --- a/board/esd/cpci750/cpci750.c +++ b/board/esd/cpci750/cpci750.c @@ -993,6 +993,6 @@ int do_show_config(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( show_config, 1, 1, do_show_config, - "show_config - Show Marvell strapping register\n", + "Show Marvell strapping register", "Show Marvell strapping register (ResetSampleLow ResetSampleHigh)\n" ); diff --git a/board/esd/dasa_sim/cmd_dasa_sim.c b/board/esd/dasa_sim/cmd_dasa_sim.c index 97a39c9d7a5..f405be94853 100644 --- a/board/esd/dasa_sim/cmd_dasa_sim.c +++ b/board/esd/dasa_sim/cmd_dasa_sim.c @@ -227,7 +227,7 @@ int do_pci9054 (cmd_tbl_t * cmdtp, int flag, int argc, U_BOOT_CMD( pci9054, 3, 1, do_pci9054, - "pci9054 - PLX PCI9054 EEPROM access\n", + "PLX PCI9054 EEPROM access", "pci9054 info - print EEPROM values\n" "pci9054 update - updates EEPROM with default values\n" ); diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c index 2f97a1262a3..f9b91b59376 100644 --- a/board/esd/du440/du440.c +++ b/board/esd/du440/du440.c @@ -606,7 +606,7 @@ int do_dcf77(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( dcf77, 1, 1, do_dcf77, - "dcf77 - Check DCF77 receiver\n", + "Check DCF77 receiver", NULL ); @@ -656,7 +656,7 @@ int do_hubinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( hubinit, 1, 1, do_hubinit, - "hubinit - Initialize USB hub\n", + "Initialize USB hub", NULL ); #endif /* CONFIG_I2C_MULTI_BUS */ @@ -789,7 +789,7 @@ int do_setup_boot_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( sbe, 2, 0, do_setup_boot_eeprom, - "sbe - setup boot eeprom\n", + "setup boot eeprom", NULL ); @@ -863,7 +863,7 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, - "eepwren - Enable / disable / query EEPROM write access\n", + "Enable / disable / query EEPROM write access", NULL); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ @@ -914,7 +914,7 @@ int do_waitpwrirq(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( wpi, 1, 1, do_waitpwrirq, - "wpi - Wait for power change interrupt\n", + "Wait for power change interrupt", NULL ); @@ -959,7 +959,7 @@ int do_dviinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( dviinit, 1, 1, do_dviinit, - "dviinit - Initialize DVI Panellink transmitter\n", + "Initialize DVI Panellink transmitter", NULL ); @@ -999,7 +999,7 @@ int do_time(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( time, CONFIG_SYS_MAXARGS, 1, do_time, - "time - run command and output execution time\n", + "run command and output execution time", NULL ); @@ -1049,6 +1049,6 @@ int do_gfxdemo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( gfxdemo, CONFIG_SYS_MAXARGS, 1, do_gfxdemo, - "gfxdemo - demo\n", + "demo", NULL ); diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c index efadf164602..ae3bc80aa0a 100644 --- a/board/esd/hh405/hh405.c +++ b/board/esd/hh405/hh405.c @@ -733,7 +733,7 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, - "eepwren - Enable / disable / query EEPROM write access\n", + "Enable / disable / query EEPROM write access", NULL); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ diff --git a/board/esd/ocrtc/cmd_ocrtc.c b/board/esd/ocrtc/cmd_ocrtc.c index f83dfe870bc..db2c5484210 100644 --- a/board/esd/ocrtc/cmd_ocrtc.c +++ b/board/esd/ocrtc/cmd_ocrtc.c @@ -54,7 +54,7 @@ int do_setdevice(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( setdevice, 1, 1, do_setdevice, - "setdevice - Set device number on pci adapter boards\n", + "Set device number on pci adapter boards", NULL ); @@ -77,7 +77,7 @@ int do_getdevice(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( getdevice, 1, 1, do_getdevice, - "getdevice - Get device number and set slot env variable\n", + "Get device number and set slot env variable", NULL ); diff --git a/board/esd/pci405/cmd_pci405.c b/board/esd/pci405/cmd_pci405.c index f558a2bc63a..a0d1f3f0d16 100644 --- a/board/esd/pci405/cmd_pci405.c +++ b/board/esd/pci405/cmd_pci405.c @@ -108,7 +108,7 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( loadpci, 1, 1, do_loadpci, - "loadpci - Wait for pci-image and boot it\n", + "Wait for pci-image and boot it", NULL ); #endif diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c index 42774ad2095..0602abf9c48 100644 --- a/board/esd/pci405/pci405.c +++ b/board/esd/pci405/pci405.c @@ -375,7 +375,7 @@ int do_wpeeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( wpeeprom, 2, 1, do_wpeeprom, - "wpeeprom - Check/Enable/Disable I2C EEPROM write protection\n", + "Check/Enable/Disable I2C EEPROM write protection", "wpeeprom\n" " - check I2C EEPROM write protection state\n" "wpeeprom 1\n" diff --git a/board/esd/pf5200/pf5200.c b/board/esd/pf5200/pf5200.c index f7962afa5c3..f225f0e1964 100644 --- a/board/esd/pf5200/pf5200.c +++ b/board/esd/pf5200/pf5200.c @@ -294,7 +294,7 @@ int do_poweroff(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) return (0); } -U_BOOT_CMD(poweroff, 1, 1, do_poweroff, "poweroff- Switch off power\n", NULL); +U_BOOT_CMD(poweroff, 1, 1, do_poweroff, "Switch off power", NULL); int phypower(int flag) { @@ -338,7 +338,7 @@ int do_phypower(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(phypower, 2, 2, do_phypower, - "phypower- Switch power of ethernet phy\n", NULL); + "Switch power of ethernet phy", NULL); int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { @@ -369,5 +369,5 @@ int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(writepci, 3, 1, do_writepci, - "writepci- Write some data to pcibus\n", + "Write some data to pcibus", "<addr> <size>\n" " - Write some data to pcibus.\n"); diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c index 85057a268fe..7c0aaa2e32d 100644 --- a/board/esd/plu405/plu405.c +++ b/board/esd/plu405/plu405.c @@ -333,6 +333,6 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, - "eepwren - Enable / disable / query EEPROM write access\n", + "Enable / disable / query EEPROM write access", NULL); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ diff --git a/board/esd/pmc405/pmc405.c b/board/esd/pmc405/pmc405.c index c0781dc950e..975b6d6d949 100644 --- a/board/esd/pmc405/pmc405.c +++ b/board/esd/pmc405/pmc405.c @@ -203,6 +203,6 @@ int do_cantest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( cantest, 3, 1, do_cantest, - "cantest - Test CAN controller", + "Test CAN controller", NULL ); diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c index 16c9c7eea2e..7808d4d17e0 100644 --- a/board/esd/pmc440/cmd_pmc440.c +++ b/board/esd/pmc440/cmd_pmc440.c @@ -98,7 +98,7 @@ int do_waithci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( waithci, 1, 1, do_waithci, - "waithci - Wait for host control interrupt\n", + "Wait for host control interrupt", NULL ); @@ -258,7 +258,7 @@ int do_fifo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( fifo, 5, 1, do_fifo, - "fifo - Fifo module operations\n", + "Fifo module operations", "wait\nfifo read\n" "fifo write fifo(0..3) data [cnt=1]\n" "fifo write address(>=4) data [cnt=1]\n" @@ -336,7 +336,7 @@ int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] } U_BOOT_CMD( sbe, 4, 0, do_setup_bootstrap_eeprom, - "sbe - setup bootstrap eeprom\n", + "setup bootstrap eeprom", "<cpufreq:400|533|667> [<console-uart:0|1> [<bringup delay (0..20s)>]]" ); @@ -399,7 +399,7 @@ int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( painit, 1, 1, do_painit, - "painit - prepare PciAccess system\n", + "prepare PciAccess system", NULL ); #endif /* CONFIG_PRAM */ @@ -411,7 +411,7 @@ int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( selfreset, 1, 1, do_selfreset, - "selfreset- assert self-reset# signal\n", + "assert self-reset# signal", NULL ); @@ -448,7 +448,7 @@ int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( resetout, 2, 1, do_resetout, - "resetout - assert PMC-RESETOUT# signal\n", + "assert PMC-RESETOUT# signal", NULL ); @@ -480,7 +480,7 @@ int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( inta, 2, 1, do_inta, - "inta - Assert/Deassert or query INTA# state in non-monarch mode\n", + "Assert/Deassert or query INTA# state in non-monarch mode", NULL ); @@ -513,7 +513,7 @@ int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( pmm, 2, 1, do_pmm, - "pmm - Setup pmm[1] registers\n", + "Setup pmm[1] registers", "<pciaddr> (pciaddr will be aligned to 256MB)\n" ); @@ -549,7 +549,7 @@ int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) return state; } U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, - "eepwren - Enable / disable / query EEPROM write access\n", + "Enable / disable / query EEPROM write access", NULL); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ diff --git a/board/esd/tasreg/tasreg.c b/board/esd/tasreg/tasreg.c index 64e6d632962..80ff2376b88 100644 --- a/board/esd/tasreg/tasreg.c +++ b/board/esd/tasreg/tasreg.c @@ -248,7 +248,7 @@ int do_iploop(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( iploop, 2, 1, do_iploop, - "iploop - iprobe loop <addr>\n", + "iprobe loop <addr>", NULL ); @@ -301,7 +301,7 @@ int do_codec(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( codec, 1, 1, do_codec, - "codec - Enable codec\n", + "Enable codec", NULL ); @@ -334,7 +334,7 @@ int do_saa(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( saa, 5, 1, do_saa, - "saa - Write to SAA1064 <addr> <instr> <cntrl> <data>\n", + "Write to SAA1064 <addr> <instr> <cntrl> <data>", NULL ); @@ -373,7 +373,7 @@ int do_iwrite(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( iwrite, 6, 1, do_iwrite, - "iwrite - Write n bytes to I2C-device\n", + "Write n bytes to I2C-device", "addr cnt data0 ... datan\n" ); @@ -405,7 +405,7 @@ int do_iread(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( iread, 3, 1, do_iread, - "iread - Read from I2C <addr> <cnt>\n", + "Read from I2C <addr> <cnt>", NULL ); @@ -443,7 +443,7 @@ int do_ireadl(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( ireadl, 2, 1, do_ireadl, - "ireadl - Read-loop from I2C <addr>\n", + "Read-loop from I2C <addr>", NULL ); #endif diff --git a/board/esd/voh405/voh405.c b/board/esd/voh405/voh405.c index ec65ffd4346..5480105b488 100644 --- a/board/esd/voh405/voh405.c +++ b/board/esd/voh405/voh405.c @@ -392,6 +392,6 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, - "eepwren - Enable / disable / query EEPROM write access\n", + "Enable / disable / query EEPROM write access", NULL); #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ diff --git a/board/evb64260/zuma_pbb.c b/board/evb64260/zuma_pbb.c index 1d03570937a..aef9c27e79f 100644 --- a/board/evb64260/zuma_pbb.c +++ b/board/evb64260/zuma_pbb.c @@ -202,19 +202,19 @@ do_zuma_init_mbox (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( zinit, 1, 0, do_zuma_init_pbb, - "zinit - init zuma pbb\n", + "init zuma pbb", "\n" " - init zuma pbb\n" ); U_BOOT_CMD( zdtest, 3, 1, do_zuma_test_dma, - "zdtest - run dma test\n", + "run dma test", "[cmd [count]]\n" " - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes\n" ); U_BOOT_CMD( zminit, 1, 0, do_zuma_init_mbox, - "zminit - init zuma mbox\n", + "init zuma mbox", "\n" " - init zuma mbox\n" ); diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c index 96820ac60a8..eb76d937f86 100644 --- a/board/freescale/common/pixis.c +++ b/board/freescale/common/pixis.c @@ -280,7 +280,7 @@ int pixis_disable_watchdog_cmd(cmd_tbl_t *cmdtp, U_BOOT_CMD( diswd, 1, 0, pixis_disable_watchdog_cmd, - "diswd - Disable watchdog timer \n", + "Disable watchdog timer", NULL); #ifdef CONFIG_PIXIS_SGMII_CMD @@ -539,7 +539,7 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd, - "pixis_reset - Reset the board using the FPGA sequencer\n", + "Reset the board using the FPGA sequencer", " pixis_reset\n" " pixis_reset [altbank]\n" " pixis_reset altbank wd\n" diff --git a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c index 2320c0f1387..2b2d5d7ec27 100644 --- a/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c +++ b/board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c @@ -138,7 +138,7 @@ int mpc8610diu_init_show_bmp(cmd_tbl_t *cmdtp, U_BOOT_CMD( diufb, CONFIG_SYS_MAXARGS, 1, mpc8610diu_init_show_bmp, - "diufb - Init or Display BMP file\n", + "Init or Display BMP file", "init\n - initialize DIU\n" "addr\n - display bmp at address 'addr'\n" ); diff --git a/board/g2000/g2000.c b/board/g2000/g2000.c index 48fc643dce6..b35038dc437 100644 --- a/board/g2000/g2000.c +++ b/board/g2000/g2000.c @@ -185,7 +185,7 @@ int do_dumpebc(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( dumpebc, 1, 1, do_dumpebc, - "dumpebc - Dump all EBC registers\n", + "Dump all EBC registers", NULL ); @@ -207,7 +207,7 @@ int do_dumpdcr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( dumpdcr, 1, 1, do_dumpdcr, - "dumpdcr - Dump all DCR registers\n", + "Dump all DCR registers", NULL ); @@ -271,7 +271,7 @@ int do_dumpspr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( dumpspr, 1, 1, do_dumpspr, - "dumpspr - Dump all SPR registers\n", + "Dump all SPR registers", NULL ); #endif diff --git a/board/hymod/bsp.c b/board/hymod/bsp.c index 54b3b86c6db..092d3684402 100644 --- a/board/hymod/bsp.c +++ b/board/hymod/bsp.c @@ -277,7 +277,7 @@ do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( fpga, 6, 1, do_fpga, - "fpga - FPGA sub-system\n", + "FPGA sub-system", "load [type] addr size\n" " - write the configuration data at memory address `addr',\n" " size `size' bytes, into the FPGA of type `type' (either\n" @@ -336,7 +336,7 @@ do_eecl (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( eeclear, 1, 0, do_eecl, - "eeclear - Clear the eeprom on a Hymod board \n", + "Clear the eeprom on a Hymod board", "[type]\n" " - write zeroes into the EEPROM on the board of type `type'\n" " (`type' is either `main' or `mezz' - default `main')\n" diff --git a/board/keymile/common/keymile_hdlc_enet.c b/board/keymile/common/keymile_hdlc_enet.c index 141371b8f88..57978800f69 100644 --- a/board/keymile/common/keymile_hdlc_enet.c +++ b/board/keymile/common/keymile_hdlc_enet.c @@ -590,7 +590,7 @@ int hdlc_enet_stest(struct cmd_tbl_s *a, int b, int c, char **d) } U_BOOT_CMD( stest, 1, 1, hdlc_enet_stest, - "stest - simple send test for hdlc_enet\n", + "simple send test for hdlc_enet", "no arguments\n" ); /* simple receive test routine */ @@ -612,7 +612,7 @@ int hdlc_enet_rtest(struct cmd_tbl_s *a, int b, int c, char **d) } U_BOOT_CMD( rtest, 1, 1, hdlc_enet_rtest, - "rtest - simple receive test for hdlc_enet\n", + "simple receive test for hdlc_enet", "no arguments\n" ); #endif diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c index 257f1cd2497..1b665a91885 100644 --- a/board/lwmon/lwmon.c +++ b/board/lwmon/lwmon.c @@ -851,7 +851,7 @@ int do_pic (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( pic, 4, 1, do_pic, - "pic - read and write PIC registers\n", + "read and write PIC registers", "read reg - read PIC register `reg'\n" "pic write reg val - write value `val' to PIC register `reg'\n" ); @@ -910,7 +910,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( kbd, 1, 1, do_kbd, - "kbd - read keyboard status\n", + "read keyboard status", NULL ); @@ -982,7 +982,7 @@ int do_lsb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( lsb, 2, 1, do_lsb, - "lsb - check and set LSB switch\n", + "check and set LSB switch", "on - switch LSB on\n" "lsb off - switch LSB off\n" "lsb - print current setting\n" diff --git a/board/lwmon5/kbd.c b/board/lwmon5/kbd.c index 0a8787a91ce..bafd39c62ae 100644 --- a/board/lwmon5/kbd.c +++ b/board/lwmon5/kbd.c @@ -432,7 +432,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( kbd, 1, 1, do_kbd, - "kbd - read keyboard status\n", + "read keyboard status", NULL ); diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index adecad0f8d8..4c04b984193 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -486,7 +486,7 @@ int do_eeprom_wp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( eepromwp, 2, 0, do_eeprom_wp, - "eepromwp- eeprom write protect off/on\n", + "eeprom write protect off/on", "<on|off> - enable (on) or disable (off) I2C EEPROM write protect\n" ); diff --git a/board/mpl/mip405/cmd_mip405.c b/board/mpl/mip405/cmd_mip405.c index 6ad95b5dda5..dc1380445a0 100644 --- a/board/mpl/mip405/cmd_mip405.c +++ b/board/mpl/mip405/cmd_mip405.c @@ -55,7 +55,7 @@ int do_mip405(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( mip405, 8, 1, do_mip405, - "mip405 - MIP405 specific Cmds\n", + "MIP405 specific Cmds", "flash mem [SrcAddr] - updates U-Boot with image in memory\n" "mip405 flash mps - updates U-Boot with image from MPS\n" "mip405 info - displays board information\n" diff --git a/board/mpl/pati/cmd_pati.c b/board/mpl/pati/cmd_pati.c index 9d9531b54f3..95bfdcc8c8e 100644 --- a/board/mpl/pati/cmd_pati.c +++ b/board/mpl/pati/cmd_pati.c @@ -427,7 +427,7 @@ int do_pati(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( pati, 8, 1, do_pati, - "pati - PATI specific Cmds\n", + "PATI specific Cmds", "info - displays board information\n" "pati pci - displays PCI registers\n" "pati led <nr> <on> \n" diff --git a/board/mpl/pip405/cmd_pip405.c b/board/mpl/pip405/cmd_pip405.c index 945e5c95845..ad5e0a1e189 100644 --- a/board/mpl/pip405/cmd_pip405.c +++ b/board/mpl/pip405/cmd_pip405.c @@ -60,7 +60,7 @@ int do_pip405(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( pip405, 6, 1, do_pip405, - "pip405 - PIP405 specific Cmds\n", + "PIP405 specific Cmds", "flash mem [SrcAddr] - updates U-Boot with image in memory\n" "pip405 flash floppy [SrcAddr] - updates U-Boot with image from floppy\n" "pip405 flash mps - updates U-Boot with image from MPS\n" diff --git a/board/mpl/vcma9/cmd_vcma9.c b/board/mpl/vcma9/cmd_vcma9.c index d3629c58992..2748fa97f8a 100644 --- a/board/mpl/vcma9/cmd_vcma9.c +++ b/board/mpl/vcma9/cmd_vcma9.c @@ -175,6 +175,6 @@ int do_vcma9(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( vcma9, 6, 1, do_vcma9, - "vcma9 - VCMA9 specific commands\n", + "VCMA9 specific commands", "flash mem [SrcAddr]\n - updates U-Boot with image in memory\n" ); diff --git a/board/pcippc2/pcippc2.c b/board/pcippc2/pcippc2.c index c706ca588d7..80c2cb58e2d 100644 --- a/board/pcippc2/pcippc2.c +++ b/board/pcippc2/pcippc2.c @@ -236,7 +236,7 @@ int do_wd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( wd, 2, 1, do_wd, - "wd - check and set watchdog\n", + "check and set watchdog", "on - switch watchDog on\n" "wd off - switch watchdog off\n" "wd - print current status\n" diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c index 01ceecebbb8..5fd3291e4a9 100644 --- a/board/pcs440ep/pcs440ep.c +++ b/board/pcs440ep/pcs440ep.c @@ -761,7 +761,7 @@ int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( led, 2, 1, do_led, - "led - set the DIAG-LED\n", + "set the DIAG-LED", "[bitmask] 0x01 = DIAG 1 on\n" " 0x02 = DIAG 2 on\n" " 0x04 = DIAG 3 on\n" @@ -823,7 +823,7 @@ int do_sha1 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( sha1, 4, 1, do_sha1, - "sha1 - calculate the SHA1 Sum\n", + "calculate the SHA1 Sum", "address len [addr] calculate the SHA1 sum [save at addr]\n" " -p calculate the SHA1 sum from the U-Boot image in flash and print\n" " -c check the U-Boot image in flash\n" diff --git a/board/pn62/cmd_pn62.c b/board/pn62/cmd_pn62.c index bb98fcfa00c..10d0df63a8c 100644 --- a/board/pn62/cmd_pn62.c +++ b/board/pn62/cmd_pn62.c @@ -53,7 +53,7 @@ int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( led , 3, 1, do_led, - "led - set LED 0..11 on the PN62 board\n", + "set LED 0..11 on the PN62 board", "i fun\n" " - set 'i'th LED to function 'fun'\n" ); @@ -174,7 +174,7 @@ int do_loadpci (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( loadpci, 2, 1, do_loadpci, - "loadpci - load binary file over PCI\n", + "load binary file over PCI", "[addr]\n" " - load binary file over PCI to address 'addr'\n" ); diff --git a/board/prodrive/pdnb3/pdnb3.c b/board/prodrive/pdnb3/pdnb3.c index 9b87f6a8a95..877728403fd 100644 --- a/board/prodrive/pdnb3/pdnb3.c +++ b/board/prodrive/pdnb3/pdnb3.c @@ -227,7 +227,7 @@ int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( fpga, 2, 0, do_fpga, - "fpga - boot FPGA\n", + "boot FPGA", "address size\n - boot FPGA with gzipped image at <address>\n" ); diff --git a/board/pxa255_idp/pxa_idp.c b/board/pxa255_idp/pxa_idp.c index b0aa8dda889..aa598aaa44d 100644 --- a/board/pxa255_idp/pxa_idp.c +++ b/board/pxa255_idp/pxa_idp.c @@ -128,7 +128,7 @@ int do_idpcmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(idpcmd, CONFIG_SYS_MAXARGS, 0, do_idpcmd, - "idpcmd - custom IDP command\n", + "custom IDP command", "no args at this time\n" ); diff --git a/board/r360mpi/r360mpi.c b/board/r360mpi/r360mpi.c index b502e4d78c4..1871984a699 100644 --- a/board/r360mpi/r360mpi.c +++ b/board/r360mpi/r360mpi.c @@ -414,6 +414,6 @@ int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( kbd, 1, 1, do_kbd, - "kbd - read keyboard status\n", + "read keyboard status", NULL ); diff --git a/board/renesas/sh7785lcr/rtl8169_mac.c b/board/renesas/sh7785lcr/rtl8169_mac.c index 8b04453adb2..6d0bbc0c2f0 100644 --- a/board/renesas/sh7785lcr/rtl8169_mac.c +++ b/board/renesas/sh7785lcr/rtl8169_mac.c @@ -323,7 +323,7 @@ int do_set_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( setmac, 2, 1, do_set_mac, - "setmac - write MAC address for RTL8110SCL\n", + "write MAC address for RTL8110SCL", "\n" "setmac <mac address> - write MAC address for RTL8110SCL\n" ); @@ -342,7 +342,7 @@ int do_print_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( printmac, 1, 1, do_print_mac, - "printmac - print MAC address for RTL8110\n", + "print MAC address for RTL8110", "\n" " - print MAC address for RTL8110\n" ); diff --git a/board/renesas/sh7785lcr/selfcheck.c b/board/renesas/sh7785lcr/selfcheck.c index 22079fbcc0d..6dbb7842e45 100644 --- a/board/renesas/sh7785lcr/selfcheck.c +++ b/board/renesas/sh7785lcr/selfcheck.c @@ -159,7 +159,7 @@ int do_hw_test(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( hwtest, 2, 1, do_hw_test, - "hwtest - hardware test for R0P7785LC0011RL board\n", + "hardware test for R0P7785LC0011RL board", "\n" "hwtest all - test all hardware\n" "hwtest pld - output PLD version\n" diff --git a/board/sandburst/common/ppc440gx_i2c.c b/board/sandburst/common/ppc440gx_i2c.c index 9af6b8d8815..c1af70ceab3 100644 --- a/board/sandburst/common/ppc440gx_i2c.c +++ b/board/sandburst/common/ppc440gx_i2c.c @@ -500,7 +500,7 @@ int do_i2c1_probe(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( iprobe1, 1, 1, do_i2c1_probe, - "iprobe1 - probe to discover valid I2C chip addresses\n", + "probe to discover valid I2C chip addresses", "\n -discover valid I2C chip addresses\n" ); diff --git a/board/sandburst/karef/karef.c b/board/sandburst/karef/karef.c index 8d97a9c3577..9b94af55043 100644 --- a/board/sandburst/karef/karef.c +++ b/board/sandburst/karef/karef.c @@ -578,7 +578,7 @@ int karefRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(kasetup, 1, 1, karefSetupVars, - "kasetup - Set environment to factory defaults\n", NULL); + "Set environment to factory defaults", NULL); U_BOOT_CMD(karecover, 1, 1, karefRecover, - "karecover - Set environment to allow for fs recovery\n", NULL); + "Set environment to allow for fs recovery", NULL); diff --git a/board/sandburst/metrobox/metrobox.c b/board/sandburst/metrobox/metrobox.c index 19302dc61e0..ec4c45153a5 100644 --- a/board/sandburst/metrobox/metrobox.c +++ b/board/sandburst/metrobox/metrobox.c @@ -544,7 +544,7 @@ int metroboxRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(mbsetup, 1, 1, metroboxSetupVars, - "mbsetup - Set environment to factory defaults\n", NULL); + "Set environment to factory defaults", NULL); U_BOOT_CMD(mbrecover, 1, 1, metroboxRecover, - "mbrecover - Set environment to allow for fs recovery\n", NULL); + "Set environment to allow for fs recovery", NULL); diff --git a/board/siemens/common/fpga.c b/board/siemens/common/fpga.c index 63aa179d2db..c9a93e15892 100644 --- a/board/siemens/common/fpga.c +++ b/board/siemens/common/fpga.c @@ -292,7 +292,7 @@ int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( fpga, 4, 1, do_fpga, - "fpga - access FPGA(s)\n", + "access FPGA(s)", "fpga status [name] - print FPGA status\n" "fpga reset [name] - reset FPGA\n" "fpga load [name] addr - load FPGA configuration data\n" diff --git a/board/siemens/pcu_e/pcu_e.c b/board/siemens/pcu_e/pcu_e.c index 25cf2bb2971..f87d6bc00f1 100644 --- a/board/siemens/pcu_e/pcu_e.c +++ b/board/siemens/pcu_e/pcu_e.c @@ -404,7 +404,7 @@ int do_puma (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD (puma, 4, 1, do_puma, - "puma - access PUMA FPGA\n", + "access PUMA FPGA", "status - print PUMA status\n" "puma load addr len - load PUMA configuration data\n"); diff --git a/board/ssv/common/cmd_sled.c b/board/ssv/common/cmd_sled.c index cb796982b9f..99ff5076084 100644 --- a/board/ssv/common/cmd_sled.c +++ b/board/ssv/common/cmd_sled.c @@ -156,7 +156,7 @@ int do_sled (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) #endif U_BOOT_CMD (sled, 3, 0, do_sled, - "sled - check and set status led\n", + "check and set status led", "sled [name [state]]\n" __NAME_STR " - state: on|off|blink\n"); #endif #endif /* CONFIG_STATUS_LED */ diff --git a/board/ssv/common/wd_pio.c b/board/ssv/common/wd_pio.c index 8823ed12f43..9b384259e4b 100644 --- a/board/ssv/common/wd_pio.c +++ b/board/ssv/common/wd_pio.c @@ -151,7 +151,7 @@ int do_wd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( wd, 2, 1, do_wd, - "wd - check and set watchdog\n", + "check and set watchdog", "on - switch watchDog on\n" "wd off - switch watchdog off\n" "wd - print current status\n" diff --git a/board/tqc/tqm5200/cmd_stk52xx.c b/board/tqc/tqm5200/cmd_stk52xx.c index 6ef7fbe0132..20632a7f1eb 100644 --- a/board/tqc/tqm5200/cmd_stk52xx.c +++ b/board/tqc/tqm5200/cmd_stk52xx.c @@ -1194,7 +1194,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( sound , 5, 1, cmd_sound, - "sound - Sound sub-system\n", + "Sound sub-system", "saw [duration] [freq] [channel]\n" " - generate sawtooth for 'duration' ms with frequency 'freq'\n" " on left \"l\" or right \"r\" channel\n" @@ -1206,14 +1206,14 @@ U_BOOT_CMD( U_BOOT_CMD( wav , 3, 1, cmd_wav, - "wav - play wav file\n", + "play wav file", "[addr] [bytes]\n" " - play wav file at address 'addr' with length 'bytes'\n" ); U_BOOT_CMD( beep , 2, 1, cmd_beep, - "beep - play short beep\n", + "play short beep", "[channel]\n" " - play short beep on \"l\"eft or \"r\"ight channel\n" ); @@ -1222,7 +1222,7 @@ U_BOOT_CMD( #if defined(CONFIG_STK52XX) U_BOOT_CMD( fkt , 4, 1, cmd_fkt, - "fkt - Function test routines\n", + "Function test routines", "led number on/off\n" " - 'number's like printed on STK52XX board\n" "fkt can\n" @@ -1237,7 +1237,7 @@ U_BOOT_CMD( #elif defined(CONFIG_FO300) U_BOOT_CMD( fkt , 3, 1, cmd_fkt, - "fkt - Function test routines\n", + "Function test routines", "fkt can\n" " - loopback plug for X16/X29 required\n" "fkt rs232 number\n" diff --git a/board/tqc/tqm5200/cmd_tb5200.c b/board/tqc/tqm5200/cmd_tb5200.c index 214dca65e53..b9c9e7e194e 100644 --- a/board/tqc/tqm5200/cmd_tb5200.c +++ b/board/tqc/tqm5200/cmd_tb5200.c @@ -90,13 +90,13 @@ int cmd_backlight(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( led , 2, 1, cmd_led, - "led - switch status LED on or off\n", + "switch status LED on or off", "on/off\n" ); U_BOOT_CMD( backlight , 2, 1, cmd_backlight, - "backlight - switch backlight on or off\n", + "switch backlight on or off", "on/off\n" ); diff --git a/board/tqc/tqm8272/tqm8272.c b/board/tqc/tqm8272/tqm8272.c index 5d0741d8096..5bc080ff81e 100644 --- a/board/tqc/tqm8272/tqm8272.c +++ b/board/tqc/tqm8272/tqm8272.c @@ -866,7 +866,7 @@ int do_hwib_dump (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( hwib, 1, 1, do_hwib_dump, - "hwib - dump HWIB'\n", + "dump HWIB'", "\n" ); diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c index 5020d609f45..7e2a6723480 100644 --- a/board/trab/cmd_trab.c +++ b/board/trab/cmd_trab.c @@ -258,7 +258,7 @@ int do_burn_in (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( burn_in, 1, 1, do_burn_in, - "burn_in - start burn-in test application on TRAB\n", + "start burn-in test application on TRAB", "\n" " - start burn-in test application\n" " The burn-in test could took a while to finish!\n" @@ -292,7 +292,7 @@ int do_dip (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( dip, 1, 1, do_dip, - "dip - read dip switch on TRAB\n", + "read dip switch on TRAB", "\n" " - read state of dip switch (S1) on TRAB board\n" " read sequence: 1-2-3-4; ON=1; OFF=0; e.g.: \"0100\"\n" @@ -321,7 +321,7 @@ int do_vcc5v (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( vcc5v, 1, 1, do_vcc5v, - "vcc5v - read VCC5V on TRAB\n", + "read VCC5V on TRAB", "\n" " - read actual value of voltage VCC5V\n" ); @@ -346,7 +346,7 @@ int do_contact_temp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( c_temp, 1, 1, do_contact_temp, - "c_temp - read contact temperature on TRAB\n", + "read contact temperature on TRAB", "\n" " - reads the onboard temperature (=contact temperature)\n" ); @@ -398,7 +398,7 @@ int do_burn_in_status (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( bis, 1, 1, do_burn_in_status, - "bis - print burn in status on TRAB\n", + "print burn in status on TRAB", "\n" " - prints the status variables of the last burn in test\n" " stored in the onboard EEPROM on TRAB board\n" @@ -886,7 +886,7 @@ int do_temp_log (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( tlog, 2, 1, do_temp_log, - "tlog - log contact temperature [1/100 C] to console (endlessly)\n", + "log contact temperature [1/100 C] to console (endlessly)", "delay\n" " - contact temperature [1/100 C] is printed endlessly to console\n" " <delay> specifies the seconds to wait between two measurements\n" diff --git a/board/trab/trab.c b/board/trab/trab.c index 57ff718782f..7fcc4507f7c 100644 --- a/board/trab/trab.c +++ b/board/trab/trab.c @@ -322,7 +322,7 @@ int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( kbd, 1, 1, do_kbd, - "kbd - read keyboard status\n", + "read keyboard status", NULL ); diff --git a/board/trizepsiv/eeprom.c b/board/trizepsiv/eeprom.c index e11519aa2f8..63f1c6cdf79 100644 --- a/board/trizepsiv/eeprom.c +++ b/board/trizepsiv/eeprom.c @@ -76,7 +76,7 @@ int do_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { U_BOOT_CMD( dm9000ee,4,1,do_dm9000_eeprom, - "dm9000ee- Read/Write eeprom connected to Ethernet Controller\n", + "Read/Write eeprom connected to Ethernet Controller", "\ndm9000ee write <word offset> <value> \n" "\tdm9000ee read \n" "\tword:\t\t00-02 : MAC Address\n" diff --git a/board/w7o/cmd_vpd.c b/board/w7o/cmd_vpd.c index 52025213d7f..eaec940e679 100644 --- a/board/w7o/cmd_vpd.c +++ b/board/w7o/cmd_vpd.c @@ -58,7 +58,7 @@ int do_vpd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( vpd, 2, 1, do_vpd, - "vpd - Read Vital Product Data\n", + "Read Vital Product Data", "[dev_addr]\n" " - Read VPD Data from default address, or device address 'dev_addr'.\n" ); diff --git a/board/zeus/update.c b/board/zeus/update.c index 2f2a127f734..ce1f34fee2b 100644 --- a/board/zeus/update.c +++ b/board/zeus/update.c @@ -98,7 +98,7 @@ int do_update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[]) U_BOOT_CMD ( update_boot_eeprom, 1, 1, do_update_boot_eeprom, - "update_boot_eeprom - update boot eeprom content\n", + "update boot eeprom content", NULL ); diff --git a/board/zeus/zeus.c b/board/zeus/zeus.c index 974bdf29c15..3f329c2fc99 100644 --- a/board/zeus/zeus.c +++ b/board/zeus/zeus.c @@ -327,7 +327,7 @@ int do_set_default(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( setdef, 4, 1, do_set_default, - "setdef - write board-specific values to EEPROM (ethaddr...)\n", + "write board-specific values to EEPROM (ethaddr...)", "ethaddr eth1addr serial#\n - write board-specific values to EEPROM\n" ); @@ -418,7 +418,7 @@ int do_chkreset(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[]) U_BOOT_CMD ( chkreset, 1, 1, do_chkreset, - "chkreset- Check for status of SW-reset button and act accordingly\n", + "Check for status of SW-reset button and act accordingly", NULL ); diff --git a/common/cmd_ambapp.c b/common/cmd_ambapp.c index 43427bb3c54..06531f12b32 100644 --- a/common/cmd_ambapp.c +++ b/common/cmd_ambapp.c @@ -273,6 +273,6 @@ int ambapp_init_reloc(void) } U_BOOT_CMD(ambapp, 1, 1, do_ambapp_print, - "ambapp - list AMBA Plug&Play information\n", + "list AMBA Plug&Play information", "ambapp\n" " - lists AMBA (AHB & APB) Plug&Play devices present on the system\n"); diff --git a/common/cmd_autoscript.c b/common/cmd_autoscript.c index 4517ac83c76..e5a9bc02db2 100644 --- a/common/cmd_autoscript.c +++ b/common/cmd_autoscript.c @@ -230,7 +230,7 @@ do_autoscript (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( autoscr, 2, 0, do_autoscript, - "autoscr - run script from memory\n", + "run script from memory", "[addr] - run script starting at addr" " - A valid autoscr header must be present\n" #if defined(CONFIG_FIT) diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index b660d2ab995..8e9251d4aa5 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -444,6 +444,6 @@ static void print_str(const char *name, const char *str) U_BOOT_CMD( bdinfo, 1, 1, do_bdinfo, - "bdinfo - print Board Info structure\n", + "print Board Info structure", NULL ); diff --git a/common/cmd_bedbug.c b/common/cmd_bedbug.c index 1dda1933447..cd9e720fc62 100644 --- a/common/cmd_bedbug.c +++ b/common/cmd_bedbug.c @@ -107,7 +107,7 @@ int do_bedbug_dis (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } /* do_bedbug_dis */ U_BOOT_CMD (ds, 3, 1, do_bedbug_dis, - "ds - disassemble memory\n", + "disassemble memory", "ds <address> [# instructions]\n"); /* ====================================================================== @@ -160,7 +160,7 @@ int do_bedbug_asm (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } /* do_bedbug_asm */ U_BOOT_CMD (as, 2, 0, do_bedbug_asm, - "as - assemble memory\n", "as <address>\n"); + "assemble memory", "as <address>\n"); /* ====================================================================== * Used to set a break point from the interpreter. Simply calls into the @@ -177,7 +177,7 @@ int do_bedbug_break (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } /* do_bedbug_break */ U_BOOT_CMD (break, 3, 0, do_bedbug_break, - "break - set or clear a breakpoint\n", + "set or clear a breakpoint", " - Set or clear a breakpoint\n" "break <address> - Break at an address\n" "break off <bp#> - Disable breakpoint.\n" @@ -277,7 +277,7 @@ int do_bedbug_continue (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } /* do_bedbug_continue */ U_BOOT_CMD (continue, 1, 0, do_bedbug_continue, - "continue- continue from a breakpoint\n", + "continue from a breakpoint", " - continue from a breakpoint.\n"); /* ====================================================================== @@ -308,7 +308,7 @@ int do_bedbug_step (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } /* do_bedbug_step */ U_BOOT_CMD (step, 1, 1, do_bedbug_step, - "step - single step execution.\n", + "single step execution.", " - single step execution.\n"); /* ====================================================================== @@ -339,7 +339,7 @@ int do_bedbug_next (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } /* do_bedbug_next */ U_BOOT_CMD (next, 1, 1, do_bedbug_next, - "next - single step execution, stepping over subroutines.\n", + "single step execution, stepping over subroutines.", " - single step execution, stepping over subroutines.\n"); /* ====================================================================== @@ -384,7 +384,7 @@ int do_bedbug_stack (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } /* do_bedbug_stack */ U_BOOT_CMD (where, 1, 1, do_bedbug_stack, - "where - Print the running stack.\n", + "Print the running stack.", " - Print the running stack.\n"); /* ====================================================================== @@ -405,7 +405,7 @@ int do_bedbug_rdump (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } /* do_bedbug_rdump */ U_BOOT_CMD (rdump, 1, 1, do_bedbug_rdump, - "rdump - Show registers.\n", " - Show registers.\n"); + "Show registers.", " - Show registers.\n"); /* ====================================================================== */ diff --git a/common/cmd_bmp.c b/common/cmd_bmp.c index e60f18b15b5..abbb0704fbe 100644 --- a/common/cmd_bmp.c +++ b/common/cmd_bmp.c @@ -139,7 +139,7 @@ int do_bmp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( bmp, 5, 1, do_bmp, - "bmp - manipulate BMP image data\n", + "manipulate BMP image data", "info <imageAddr> - display image info\n" "bmp display <imageAddr> [x y] - display image at x,y\n" ); diff --git a/common/cmd_boot.c b/common/cmd_boot.c index 36106c7e606..efc1a0262f0 100644 --- a/common/cmd_boot.c +++ b/common/cmd_boot.c @@ -64,7 +64,7 @@ int do_go (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( go, CONFIG_SYS_MAXARGS, 1, do_go, - "go - start application at address 'addr'\n", + "start application at address 'addr'", "addr [arg ...]\n - start application at address 'addr'\n" " passing 'arg' as arguments\n" ); @@ -73,6 +73,6 @@ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); U_BOOT_CMD( reset, 1, 0, do_reset, - "reset - Perform RESET of the CPU\n", + "Perform RESET of the CPU", NULL ); diff --git a/common/cmd_bootldr.c b/common/cmd_bootldr.c index e6474aab22b..b525f0d602d 100644 --- a/common/cmd_bootldr.c +++ b/common/cmd_bootldr.c @@ -59,6 +59,6 @@ int do_bootldr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(bootldr, 2, 0, do_bootldr, - "bootldr - boot ldr image from memory\n", + "boot ldr image from memory", "[addr]\n" " - boot ldr image stored in memory\n"); diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 68f167594cc..07f6c6bca2d 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -913,7 +913,7 @@ static void *boot_get_kernel (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] U_BOOT_CMD( bootm, CONFIG_SYS_MAXARGS, 1, do_bootm, - "bootm - boot application image from memory\n", + "boot application image from memory", "[addr [arg ...]]\n - boot application image stored in memory\n" "\tpassing arguments 'arg ...'; when booting a Linux kernel,\n" "\t'arg' can be the address of an initrd image\n" @@ -970,14 +970,14 @@ int do_bootd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( boot, 1, 1, do_bootd, - "boot - boot default, i.e., run 'bootcmd'\n", + "boot default, i.e., run 'bootcmd'", NULL ); /* keep old command name "bootd" for backward compatibility */ U_BOOT_CMD( bootd, 1, 1, do_bootd, - "bootd - boot default, i.e., run 'bootcmd'\n", + "boot default, i.e., run 'bootcmd'", NULL ); @@ -1062,7 +1062,7 @@ static int image_info (ulong addr) U_BOOT_CMD( iminfo, CONFIG_SYS_MAXARGS, 1, do_iminfo, - "iminfo - print header information for application image\n", + "print header information for application image", "addr [addr ...]\n" " - print header information for application image starting at\n" " address 'addr' in memory; this includes verification of the\n" @@ -1130,7 +1130,7 @@ next_bank: ; U_BOOT_CMD( imls, 1, 1, do_imls, - "imls - list all images found in flash\n", + "list all images found in flash", "\n" " - Prints information about all images found at sector\n" " boundaries in flash.\n" diff --git a/common/cmd_cache.c b/common/cmd_cache.c index caa56daf2ed..c0f2cbaf674 100644 --- a/common/cmd_cache.c +++ b/common/cmd_cache.c @@ -97,14 +97,14 @@ static int on_off (const char *s) U_BOOT_CMD( icache, 2, 1, do_icache, - "icache - enable or disable instruction cache\n", + "enable or disable instruction cache", "[on, off]\n" " - enable or disable instruction cache\n" ); U_BOOT_CMD( dcache, 2, 1, do_dcache, - "dcache - enable or disable data cache\n", + "enable or disable data cache", "[on, off]\n" " - enable or disable data (writethrough) cache\n" ); diff --git a/common/cmd_console.c b/common/cmd_console.c index e2bc2a30d91..f861f8300ce 100644 --- a/common/cmd_console.c +++ b/common/cmd_console.c @@ -65,6 +65,6 @@ int do_coninfo (cmd_tbl_t * cmd, int flag, int argc, char *argv[]) U_BOOT_CMD( coninfo, 3, 1, do_coninfo, - "coninfo - print console devices and information\n", + "print console devices and information", "" ); diff --git a/common/cmd_cplbinfo.c b/common/cmd_cplbinfo.c index b2bbec12ea8..629e6a9389e 100644 --- a/common/cmd_cplbinfo.c +++ b/common/cmd_cplbinfo.c @@ -54,6 +54,6 @@ int do_cplbinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(cplbinfo, 1, 0, do_cplbinfo, - "cplbinfo- display current CPLB tables\n", + "display current CPLB tables", "\n" " - display current CPLB tables\n"); diff --git a/common/cmd_date.c b/common/cmd_date.c index d6bd931caff..3d78be2696d 100644 --- a/common/cmd_date.c +++ b/common/cmd_date.c @@ -214,7 +214,7 @@ int mk_date (char *datestr, struct rtc_time *tmp) U_BOOT_CMD( date, 2, 1, do_date, - "date - get/set/reset date & time\n", + "get/set/reset date & time", "[MMDDhhmm[[CC]YY][.ss]]\ndate reset\n" " - without arguments: print date & time\n" " - with numeric argument: set the system date & time\n" diff --git a/common/cmd_dcr.c b/common/cmd_dcr.c index 7d382bbbf24..7aed06c1170 100644 --- a/common/cmd_dcr.c +++ b/common/cmd_dcr.c @@ -223,23 +223,23 @@ int do_setidcr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( getdcr, 2, 1, do_getdcr, - "getdcr - Get an AMCC PPC 4xx DCR's value\n", + "Get an AMCC PPC 4xx DCR's value", "dcrn - return a DCR's value.\n" ); U_BOOT_CMD( setdcr, 2, 1, do_setdcr, - "setdcr - Set an AMCC PPC 4xx DCR's value\n", + "Set an AMCC PPC 4xx DCR's value", "dcrn - set a DCR's value.\n" ); U_BOOT_CMD( getidcr, 3, 1, do_getidcr, - "getidcr - Get a register value via indirect DCR addressing\n", + "Get a register value via indirect DCR addressing", "adr_dcrn[.dat_dcrn] offset - write offset to adr_dcrn, read value from dat_dcrn.\n" ); U_BOOT_CMD( setidcr, 4, 1, do_setidcr, - "setidcr - Set a register value via indirect DCR addressing\n", + "Set a register value via indirect DCR addressing", "adr_dcrn[.dat_dcrn] offset value - write offset to adr_dcrn, write value to dat_dcrn.\n" ); diff --git a/common/cmd_df.c b/common/cmd_df.c index c85b7a62417..d64f9009d73 100644 --- a/common/cmd_df.c +++ b/common/cmd_df.c @@ -33,5 +33,5 @@ usage: U_BOOT_CMD( sf, 2, 1, do_serial_flash, - "sf - Serial flash sub-system\n", + "Serial flash sub-system", "probe [bus:]cs - init flash device on given SPI bus and CS\n") diff --git a/common/cmd_diag.c b/common/cmd_diag.c index 13d4225fb85..c2a617547f1 100644 --- a/common/cmd_diag.c +++ b/common/cmd_diag.c @@ -66,7 +66,7 @@ int do_diag (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( diag, CONFIG_SYS_MAXARGS, 0, do_diag, - "diag - perform board diagnostics\n", + "perform board diagnostics", " - print list of available tests\n" "diag [test1 [test2]]\n" " - print information about specified tests\n" diff --git a/common/cmd_display.c b/common/cmd_display.c index 982e09dab62..4102424d148 100644 --- a/common/cmd_display.c +++ b/common/cmd_display.c @@ -71,7 +71,7 @@ int do_display (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( display, CONFIG_SYS_MAXARGS, 1, do_display, - "display- display string on dot matrix display\n", + "display string on dot matrix display", "[<string>]\n" " - with <string> argument: display <string> on dot matrix display\n" " - without arguments: clear dot matrix display\n" diff --git a/common/cmd_doc.c b/common/cmd_doc.c index f139d42cbaf..e2d4a42d1dc 100644 --- a/common/cmd_doc.c +++ b/common/cmd_doc.c @@ -191,7 +191,7 @@ int do_doc (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD( doc, 5, 1, do_doc, - "doc - Disk-On-Chip sub-system\n", + "Disk-On-Chip sub-system", "info - show available DOC devices\n" "doc device [dev] - show or set current device\n" "doc read addr off size\n" @@ -337,7 +337,7 @@ int do_docboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( docboot, 4, 1, do_docboot, - "docboot - boot from DOC device\n", + "boot from DOC device", "loadAddr dev\n" ); diff --git a/common/cmd_dtt.c b/common/cmd_dtt.c index c5b1d4d8fd2..7783c880ba4 100644 --- a/common/cmd_dtt.c +++ b/common/cmd_dtt.c @@ -55,6 +55,6 @@ int do_dtt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( dtt, 1, 1, do_dtt, - "dtt - Digital Thermometer and Thermostat\n", + "Digital Thermometer and Thermostat", " - Read temperature from digital thermometer and thermostat.\n" ); diff --git a/common/cmd_eeprom.c b/common/cmd_eeprom.c index c59227d6049..e598bf1ec43 100644 --- a/common/cmd_eeprom.c +++ b/common/cmd_eeprom.c @@ -425,7 +425,7 @@ void eeprom_init (void) #ifdef CONFIG_SYS_I2C_MULTI_EEPROMS U_BOOT_CMD( eeprom, 6, 1, do_eeprom, - "eeprom - EEPROM sub-system\n", + "EEPROM sub-system", "read devaddr addr off cnt\n" "eeprom write devaddr addr off cnt\n" " - read/write `cnt' bytes from `devaddr` EEPROM at offset `off'\n" @@ -433,7 +433,7 @@ U_BOOT_CMD( #else /* One EEPROM */ U_BOOT_CMD( eeprom, 5, 1, do_eeprom, - "eeprom - EEPROM sub-system\n", + "EEPROM sub-system", "read addr off cnt\n" "eeprom write addr off cnt\n" " - read/write `cnt' bytes at EEPROM offset `off'\n" diff --git a/common/cmd_elf.c b/common/cmd_elf.c index 27a4b73ed78..19e12493a2f 100644 --- a/common/cmd_elf.c +++ b/common/cmd_elf.c @@ -310,12 +310,12 @@ unsigned long load_elf_image (unsigned long addr) /* ====================================================================== */ U_BOOT_CMD( bootelf, 2, 0, do_bootelf, - "bootelf - Boot from an ELF image in memory\n", + "Boot from an ELF image in memory", " [address] - load address of ELF image.\n" ); U_BOOT_CMD( bootvx, 2, 0, do_bootvx, - "bootvx - Boot vxWorks from an ELF image\n", + "Boot vxWorks from an ELF image", " [address] - load address of vxWorks ELF image.\n" ); diff --git a/common/cmd_ext2.c b/common/cmd_ext2.c index 05a053b45bd..c2dcc6436e5 100644 --- a/common/cmd_ext2.c +++ b/common/cmd_ext2.c @@ -116,7 +116,7 @@ int do_ext2ls (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( ext2ls, 4, 1, do_ext2ls, - "ext2ls - list files in a directory (default /)\n", + "list files in a directory (default /)", "<interface> <dev[:part]> [directory]\n" " - list files from 'dev' on 'interface' in a 'directory'\n" ); @@ -252,7 +252,7 @@ int do_ext2load (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( ext2load, 6, 0, do_ext2load, - "ext2load- load binary file from a Ext2 filesystem\n", + "load binary file from a Ext2 filesystem", "<interface> <dev[:part]> [addr] [filename] [bytes]\n" " - load binary file 'filename' from 'dev' on 'interface'\n" " to address 'addr' from ext2 filesystem\n" diff --git a/common/cmd_fat.c b/common/cmd_fat.c index ebe9e090ccf..4a26b8072ec 100644 --- a/common/cmd_fat.c +++ b/common/cmd_fat.c @@ -88,7 +88,7 @@ int do_fat_fsload (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( fatload, 6, 0, do_fat_fsload, - "fatload - load binary file from a dos filesystem\n", + "load binary file from a dos filesystem", "<interface> <dev[:part]> <addr> <filename> [bytes]\n" " - load binary file 'filename' from 'dev' on 'interface'\n" " to address 'addr' from dos filesystem\n" @@ -136,7 +136,7 @@ int do_fat_ls (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( fatls, 4, 1, do_fat_ls, - "fatls - list files in a directory (default /)\n", + "list files in a directory (default /)", "<interface> <dev[:part]> [directory]\n" " - list files from 'dev' on 'interface' in a 'directory'\n" ); @@ -174,7 +174,7 @@ int do_fat_fsinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( fatinfo, 3, 1, do_fat_fsinfo, - "fatinfo - print information about filesystem\n", + "print information about filesystem", "<interface> <dev[:part]>\n" " - print information about filesystem from 'dev' on 'interface'\n" ); diff --git a/common/cmd_fdc.c b/common/cmd_fdc.c index c6265c38c69..c043b976500 100644 --- a/common/cmd_fdc.c +++ b/common/cmd_fdc.c @@ -902,7 +902,7 @@ int do_fdcboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( fdcboot, 3, 1, do_fdcboot, - "fdcboot - boot from floppy device\n", + "boot from floppy device", "loadAddr drive\n" ); #endif diff --git a/common/cmd_fdos.c b/common/cmd_fdos.c index 514c049b8b5..bcf98d9e4b9 100644 --- a/common/cmd_fdos.c +++ b/common/cmd_fdos.c @@ -142,12 +142,12 @@ int do_fdosls(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( fdosboot, 3, 0, do_fdosboot, - "fdosboot- boot from a dos floppy file\n", + "boot from a dos floppy file", "[loadAddr] [filename]\n" ); U_BOOT_CMD( fdosls, 2, 0, do_fdosls, - "fdosls - list files in a directory\n", + "list files in a directory", "[directory]\n" ); diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c index a36ca20d5b4..0947b72d20c 100644 --- a/common/cmd_fdt.c +++ b/common/cmd_fdt.c @@ -819,7 +819,7 @@ static int fdt_print(const char *pathp, char *prop, int depth) U_BOOT_CMD( fdt, 255, 0, do_fdt, - "fdt - flattened device tree utility commands\n", + "flattened device tree utility commands", "addr <addr> [<length>] - Set the fdt location to <addr>\n" #ifdef CONFIG_OF_BOARD_SETUP "fdt boardsetup - Do board-specific set up\n" diff --git a/common/cmd_flash.c b/common/cmd_flash.c index 2df40f0ee54..510654e1aeb 100644 --- a/common/cmd_flash.c +++ b/common/cmd_flash.c @@ -710,14 +710,14 @@ int flash_sect_protect (int p, ulong addr_first, ulong addr_last) U_BOOT_CMD( flinfo, 2, 1, do_flinfo, - "flinfo - print FLASH memory information\n", + "print FLASH memory information", "\n - print information for all FLASH memory banks\n" "flinfo N\n - print information for FLASH memory bank # N\n" ); U_BOOT_CMD( erase, 3, 0, do_flerase, - "erase - erase FLASH memory\n", + "erase FLASH memory", "start end\n" " - erase FLASH from addr 'start' to addr 'end'\n" "erase start +len\n" @@ -731,7 +731,7 @@ U_BOOT_CMD( U_BOOT_CMD( protect, 4, 0, do_protect, - "protect - enable or disable FLASH write protection\n", + "enable or disable FLASH write protection", "on start end\n" " - protect FLASH from addr 'start' to addr 'end'\n" "protect on start +len\n" diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c index 4abb86e9146..362bffdcd57 100644 --- a/common/cmd_fpga.c +++ b/common/cmd_fpga.c @@ -350,7 +350,7 @@ static int fpga_get_op (char *opstr) } U_BOOT_CMD (fpga, 6, 1, do_fpga, - "fpga - loadable FPGA image support\n", + "loadable FPGA image support", "fpga [operation type] [device number] [image address] [image size]\n" "fpga operations:\n" "\tinfo\tlist known device information\n" diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index 170ebc7251a..16439ac489c 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -1303,7 +1303,7 @@ int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) #if defined(CONFIG_I2C_CMD_TREE) U_BOOT_CMD( i2c, 6, 1, do_i2c, - "i2c - I2C sub-system\n", + "I2C sub-system", #if defined(CONFIG_I2C_MUX) "bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes.\n" #endif /* CONFIG_I2C_MUX */ @@ -1326,37 +1326,37 @@ U_BOOT_CMD( #endif /* CONFIG_I2C_CMD_TREE */ U_BOOT_CMD( imd, 4, 1, do_i2c_md, \ - "imd - i2c memory display\n", \ + "i2c memory display", \ "chip address[.0, .1, .2] [# of objects]\n - i2c memory display\n" \ ); U_BOOT_CMD( imm, 3, 1, do_i2c_mm, - "imm - i2c memory modify (auto-incrementing)\n", + "i2c memory modify (auto-incrementing)", "chip address[.0, .1, .2]\n" " - memory modify, auto increment address\n" ); U_BOOT_CMD( inm, 3, 1, do_i2c_nm, - "inm - memory modify (constant address)\n", + "memory modify (constant address)", "chip address[.0, .1, .2]\n - memory modify, read and keep address\n" ); U_BOOT_CMD( imw, 5, 1, do_i2c_mw, - "imw - memory write (fill)\n", + "memory write (fill)", "chip address[.0, .1, .2] value [count]\n - memory write (fill)\n" ); U_BOOT_CMD( icrc32, 5, 1, do_i2c_crc, - "icrc32 - checksum calculation\n", + "checksum calculation", "chip address[.0, .1, .2] count\n - compute CRC32 checksum\n" ); U_BOOT_CMD( iprobe, 1, 1, do_i2c_probe, - "iprobe - probe to discover valid I2C chip addresses\n", + "probe to discover valid I2C chip addresses", "\n -discover valid I2C chip addresses\n" ); @@ -1365,7 +1365,7 @@ U_BOOT_CMD( */ U_BOOT_CMD( iloop, 5, 1, do_i2c_loop, - "iloop - infinite loop on address range\n", + "infinite loop on address range", "chip address[.0, .1, .2] [# of objects]\n" " - loop, reading a set of addresses\n" ); @@ -1373,7 +1373,7 @@ U_BOOT_CMD( #if defined(CONFIG_CMD_SDRAM) U_BOOT_CMD( isdram, 2, 1, do_sdram, - "isdram - print SDRAM configuration information\n", + "print SDRAM configuration information", "chip\n - print SDRAM configuration information\n" " (valid chip values 50..57)\n" ); diff --git a/common/cmd_ide.c b/common/cmd_ide.c index 3afa38d9ce4..c9b9a479959 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -2140,7 +2140,7 @@ ulong atapi_read (int device, lbaint_t blknr, ulong blkcnt, void *buffer) U_BOOT_CMD( ide, 5, 1, do_ide, - "ide - IDE sub-system\n", + "IDE sub-system", "reset - reset IDE controller\n" "ide info - show available IDE devices\n" "ide device [dev] - show or set current device\n" @@ -2153,6 +2153,6 @@ U_BOOT_CMD( U_BOOT_CMD( diskboot, 3, 1, do_diskboot, - "diskboot- boot from IDE device\n", + "boot from IDE device", "loadAddr dev:part\n" ); diff --git a/common/cmd_immap.c b/common/cmd_immap.c index 13ad94e20aa..c8367f0fb37 100644 --- a/common/cmd_immap.c +++ b/common/cmd_immap.c @@ -614,105 +614,105 @@ do_mccinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( siuinfo, 1, 1, do_siuinfo, - "siuinfo - print System Interface Unit (SIU) registers\n", + "print System Interface Unit (SIU) registers", NULL ); U_BOOT_CMD( memcinfo, 1, 1, do_memcinfo, - "memcinfo- print Memory Controller registers\n", + "print Memory Controller registers", NULL ); U_BOOT_CMD( sitinfo, 1, 1, do_sitinfo, - "sitinfo - print System Integration Timers (SIT) registers\n", + "print System Integration Timers (SIT) registers", NULL ); #ifdef CONFIG_8260 U_BOOT_CMD( icinfo, 1, 1, do_icinfo, - "icinfo - print Interrupt Controller registers\n", + "print Interrupt Controller registers", NULL ); #endif U_BOOT_CMD( carinfo, 1, 1, do_carinfo, - "carinfo - print Clocks and Reset registers\n", + "print Clocks and Reset registers", NULL ); U_BOOT_CMD( iopinfo, 1, 1, do_iopinfo, - "iopinfo - print I/O Port registers\n", + "print I/O Port registers", NULL ); U_BOOT_CMD( iopset, 5, 0, do_iopset, - "iopset - set I/O Port registers\n", + "set I/O Port registers", "PORT PIN CMD VALUE\nPORT: A-D, PIN: 0-31, CMD: [dat|dir|odr|sor], VALUE: 0|1" ); U_BOOT_CMD( dmainfo, 1, 1, do_dmainfo, - "dmainfo - print SDMA/IDMA registers\n", + "print SDMA/IDMA registers", NULL ); U_BOOT_CMD( fccinfo, 1, 1, do_fccinfo, - "fccinfo - print FCC registers\n", + "print FCC registers", NULL ); U_BOOT_CMD( brginfo, 1, 1, do_brginfo, - "brginfo - print Baud Rate Generator (BRG) registers\n", + "print Baud Rate Generator (BRG) registers", NULL ); U_BOOT_CMD( i2cinfo, 1, 1, do_i2cinfo, - "i2cinfo - print I2C registers\n", + "print I2C registers", NULL ); U_BOOT_CMD( sccinfo, 1, 1, do_sccinfo, - "sccinfo - print SCC registers\n", + "print SCC registers", NULL ); U_BOOT_CMD( smcinfo, 1, 1, do_smcinfo, - "smcinfo - print SMC registers\n", + "print SMC registers", NULL ); U_BOOT_CMD( spiinfo, 1, 1, do_spiinfo, - "spiinfo - print Serial Peripheral Interface (SPI) registers\n", + "print Serial Peripheral Interface (SPI) registers", NULL ); U_BOOT_CMD( muxinfo, 1, 1, do_muxinfo, - "muxinfo - print CPM Multiplexing registers\n", + "print CPM Multiplexing registers", NULL ); U_BOOT_CMD( siinfo, 1, 1, do_siinfo, - "siinfo - print Serial Interface (SI) registers\n", + "print Serial Interface (SI) registers", NULL ); U_BOOT_CMD( mccinfo, 1, 1, do_mccinfo, - "mccinfo - print MCC registers\n", + "print MCC registers", NULL ); diff --git a/common/cmd_irq.c b/common/cmd_irq.c index a47cde4245c..a21aedea40c 100644 --- a/common/cmd_irq.c +++ b/common/cmd_irq.c @@ -44,7 +44,7 @@ int do_interrupts(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( interrupts, 5, 0, do_interrupts, - "interrupts - enable or disable interrupts\n", + "enable or disable interrupts", "[on, off]\n" " - enable or disable interrupts\n" ); diff --git a/common/cmd_itest.c b/common/cmd_itest.c index b3025e37eba..309b08bb03a 100644 --- a/common/cmd_itest.c +++ b/common/cmd_itest.c @@ -190,6 +190,6 @@ int do_itest ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] ) U_BOOT_CMD( itest, 4, 0, do_itest, - "itest\t- return true/false on integer compare\n", + "return true/false on integer compare", "[.b, .w, .l, .s] [*]value1 <op> [*]value2\n" ); diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c index 4c63f51c104..d0a7ceaa58b 100644 --- a/common/cmd_jffs2.c +++ b/common/cmd_jffs2.c @@ -2297,35 +2297,35 @@ int do_jffs2_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) /***************************************************/ U_BOOT_CMD( fsload, 3, 0, do_jffs2_fsload, - "fsload\t- load binary file from a filesystem image\n", + "load binary file from a filesystem image", "[ off ] [ filename ]\n" " - load binary file from flash bank\n" " with offset 'off'\n" ); U_BOOT_CMD( ls, 2, 1, do_jffs2_ls, - "ls\t- list files in a directory (default /)\n", + "list files in a directory (default /)", "[ directory ]\n" " - list files in a directory.\n" ); U_BOOT_CMD( fsinfo, 1, 1, do_jffs2_fsinfo, - "fsinfo\t- print information about filesystems\n", + "print information about filesystems", " - print information about filesystems\n" ); #ifdef CONFIG_JFFS2_CMDLINE U_BOOT_CMD( chpart, 2, 0, do_jffs2_chpart, - "chpart\t- change active partition\n", + "change active partition", "part-id\n" " - change active partition (e.g. part-id = nand0,1)\n" ); U_BOOT_CMD( mtdparts, 6, 0, do_jffs2_mtdparts, - "mtdparts- define flash/nand partitions\n", + "define flash/nand partitions", "\n" " - list partition table\n" "mtdparts delall\n" diff --git a/common/cmd_license.c b/common/cmd_license.c index 301af8d967c..c3c34967db0 100644 --- a/common/cmd_license.c +++ b/common/cmd_license.c @@ -53,7 +53,7 @@ int do_license(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(license, 1, 1, do_license, - "license - print GPL license text\n", + "print GPL license text", NULL); #endif /* CONFIG_CMD_LICENSE */ diff --git a/common/cmd_load.c b/common/cmd_load.c index 350d7a3524a..88fba889914 100644 --- a/common/cmd_load.c +++ b/common/cmd_load.c @@ -1045,7 +1045,7 @@ static ulong load_serial_ymodem (ulong offset) #ifdef CONFIG_SYS_LOADS_BAUD_CHANGE U_BOOT_CMD( loads, 3, 0, do_load_serial, - "loads - load S-Record file over serial line\n", + "load S-Record file over serial line", "[ off ] [ baud ]\n" " - load S-Record file over serial line" " with offset 'off' and baudrate 'baud'\n" @@ -1054,7 +1054,7 @@ U_BOOT_CMD( #else /* ! CONFIG_SYS_LOADS_BAUD_CHANGE */ U_BOOT_CMD( loads, 2, 0, do_load_serial, - "loads - load S-Record file over serial line\n", + "load S-Record file over serial line", "[ off ]\n" " - load S-Record file over serial line with offset 'off'\n" ); @@ -1069,7 +1069,7 @@ U_BOOT_CMD( #ifdef CONFIG_SYS_LOADS_BAUD_CHANGE U_BOOT_CMD( saves, 4, 0, do_save_serial, - "saves - save S-Record file over serial line\n", + "save S-Record file over serial line", "[ off ] [size] [ baud ]\n" " - save S-Record file over serial line" " with offset 'off', size 'size' and baudrate 'baud'\n" @@ -1077,7 +1077,7 @@ U_BOOT_CMD( #else /* ! CONFIG_SYS_LOADS_BAUD_CHANGE */ U_BOOT_CMD( saves, 3, 0, do_save_serial, - "saves - save S-Record file over serial line\n", + "save S-Record file over serial line", "[ off ] [size]\n" " - save S-Record file over serial line with offset 'off' and size 'size'\n" ); @@ -1089,7 +1089,7 @@ U_BOOT_CMD( #if defined(CONFIG_CMD_LOADB) U_BOOT_CMD( loadb, 3, 0, do_load_serial_bin, - "loadb - load binary file over serial line (kermit mode)\n", + "load binary file over serial line (kermit mode)", "[ off ] [ baud ]\n" " - load binary file over serial line" " with offset 'off' and baudrate 'baud'\n" @@ -1097,7 +1097,7 @@ U_BOOT_CMD( U_BOOT_CMD( loady, 3, 0, do_load_serial_bin, - "loady - load binary file over serial line (ymodem mode)\n", + "load binary file over serial line (ymodem mode)", "[ off ] [ baud ]\n" " - load binary file over serial line" " with offset 'off' and baudrate 'baud'\n" @@ -1129,7 +1129,7 @@ int do_hwflow (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( hwflow, 2, 0, do_hwflow, - "hwflow - turn the harwdare flow control on/off\n", + "turn the harwdare flow control on/off", "[on|off]\n - change RTS/CTS hardware flow control over serial line\n" ); diff --git a/common/cmd_log.c b/common/cmd_log.c index 6f8a27fe445..a03835d0216 100644 --- a/common/cmd_log.c +++ b/common/cmd_log.c @@ -252,7 +252,7 @@ int do_log (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( log, 255, 1, do_log, - "log - manipulate logbuffer\n", + "manipulate logbuffer", "info - show pointer details\n" "log reset - clear contents\n" "log show - show contents\n" diff --git a/common/cmd_mac.c b/common/cmd_mac.c index 4453299fe59..cf601e4e602 100644 --- a/common/cmd_mac.c +++ b/common/cmd_mac.c @@ -28,7 +28,7 @@ extern int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); U_BOOT_CMD( mac, 3, 1, do_mac, - "mac - display and program the system ID and MAC addresses in EEPROM\n", + "display and program the system ID and MAC addresses in EEPROM", "[read|save|id|num|errata|date|ports|0|1|2|3|4|5|6|7]\n" "read\n" " - show content of EEPROM\n" diff --git a/common/cmd_mem.c b/common/cmd_mem.c index e2af0306383..a203e0d3e4d 100644 --- a/common/cmd_mem.c +++ b/common/cmd_mem.c @@ -1214,39 +1214,39 @@ int do_unzip ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) /**************************************************/ U_BOOT_CMD( md, 3, 1, do_mem_md, - "md - memory display\n", + "memory display", "[.b, .w, .l] address [# of objects]\n - memory display\n" ); U_BOOT_CMD( mm, 2, 1, do_mem_mm, - "mm - memory modify (auto-incrementing)\n", + "memory modify (auto-incrementing)", "[.b, .w, .l] address\n" " - memory modify, auto increment address\n" ); U_BOOT_CMD( nm, 2, 1, do_mem_nm, - "nm - memory modify (constant address)\n", + "memory modify (constant address)", "[.b, .w, .l] address\n - memory modify, read and keep address\n" ); U_BOOT_CMD( mw, 4, 1, do_mem_mw, - "mw - memory write (fill)\n", + "memory write (fill)", "[.b, .w, .l] address value [count]\n - write memory\n" ); U_BOOT_CMD( cp, 4, 1, do_mem_cp, - "cp - memory copy\n", + "memory copy", "[.b, .w, .l] source target count\n - copy memory\n" ); U_BOOT_CMD( cmp, 4, 1, do_mem_cmp, - "cmp - memory compare\n", + "memory compare", "[.b, .w, .l] addr1 addr2 count\n - compare memory\n" ); @@ -1254,7 +1254,7 @@ U_BOOT_CMD( U_BOOT_CMD( crc32, 4, 1, do_mem_crc, - "crc32 - checksum calculation\n", + "checksum calculation", "address count [addr]\n - compute CRC32 checksum [save at addr]\n" ); @@ -1262,7 +1262,7 @@ U_BOOT_CMD( U_BOOT_CMD( crc32, 5, 1, do_mem_crc, - "crc32 - checksum calculation\n", + "checksum calculation", "address count [addr]\n - compute CRC32 checksum [save at addr]\n" "-v address count crc\n - verify crc of memory area\n" ); @@ -1271,14 +1271,14 @@ U_BOOT_CMD( U_BOOT_CMD( base, 2, 1, do_mem_base, - "base - print or set address offset\n", + "print or set address offset", "\n - print address offset for memory commands\n" "base off\n - set address offset for memory commands to 'off'\n" ); U_BOOT_CMD( loop, 3, 1, do_mem_loop, - "loop - infinite loop on address range\n", + "infinite loop on address range", "[.b, .w, .l] address number_of_objects\n" " - loop on a set of addresses\n" ); @@ -1286,7 +1286,7 @@ U_BOOT_CMD( #ifdef CONFIG_LOOPW U_BOOT_CMD( loopw, 4, 1, do_mem_loopw, - "loopw - infinite write loop on address range\n", + "infinite write loop on address range", "[.b, .w, .l] address number_of_objects data_to_write\n" " - loop on a set of addresses\n" ); @@ -1294,7 +1294,7 @@ U_BOOT_CMD( U_BOOT_CMD( mtest, 5, 1, do_mem_mtest, - "mtest - simple RAM test\n", + "simple RAM test", "[start [end [pattern [iterations]]]]\n" " - simple RAM read/write test\n" ); @@ -1302,13 +1302,13 @@ U_BOOT_CMD( #ifdef CONFIG_MX_CYCLIC U_BOOT_CMD( mdc, 4, 1, do_mem_mdc, - "mdc - memory display cyclic\n", + "memory display cyclic", "[.b, .w, .l] address count delay(ms)\n - memory display cyclic\n" ); U_BOOT_CMD( mwc, 4, 1, do_mem_mwc, - "mwc - memory write cyclic\n", + "memory write cyclic", "[.b, .w, .l] address value delay(ms)\n - memory write cyclic\n" ); #endif /* CONFIG_MX_CYCLIC */ @@ -1316,7 +1316,7 @@ U_BOOT_CMD( #ifdef CONFIG_CMD_UNZIP U_BOOT_CMD( unzip, 4, 1, do_unzip, - "unzip - unzip a memory region\n", + "unzip a memory region", "srcaddr dstaddr [dstsize]\n" ); #endif /* CONFIG_CMD_UNZIP */ diff --git a/common/cmd_mfsl.c b/common/cmd_mfsl.c index db2a994ce41..6470baceb87 100644 --- a/common/cmd_mfsl.c +++ b/common/cmd_mfsl.c @@ -389,7 +389,7 @@ int do_rspr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) /***************************************************/ U_BOOT_CMD (frd, 3, 1, do_frd, - "frd - read data from FSL\n", + "read data from FSL", "- [fslnum [0|1|2|3]]\n" " 0 - non blocking data read\n" " 1 - non blocking control read\n" @@ -398,7 +398,7 @@ U_BOOT_CMD (frd, 3, 1, do_frd, U_BOOT_CMD (fwr, 4, 1, do_fwr, - "fwr - write data to FSL\n", + "write data to FSL", "- [fslnum [0|1|2|3]]\n" " 0 - non blocking data write\n" " 1 - non blocking control write\n" @@ -406,7 +406,7 @@ U_BOOT_CMD (fwr, 4, 1, do_fwr, " 3 - blocking control write\n"); U_BOOT_CMD (rspr, 3, 1, do_rspr, - "rspr - read/write special purpose register\n", + "read/write special purpose register", "- reg_num [write value] read/write special purpose register\n" " 1 - MSR - Machine status register\n" " 3 - EAR - Exception address register\n" diff --git a/common/cmd_mii.c b/common/cmd_mii.c index 19a7fbd6884..d70031aaa5d 100644 --- a/common/cmd_mii.c +++ b/common/cmd_mii.c @@ -453,7 +453,7 @@ int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( mii, 5, 1, do_mii, - "mii - MII utility commands\n", + "MII utility commands", "device - list available devices\n" "mii device <devname> - set current device\n" "mii info <addr> - display MII PHY info\n" diff --git a/common/cmd_misc.c b/common/cmd_misc.c index c29f52baecf..024299a877e 100644 --- a/common/cmd_misc.c +++ b/common/cmd_misc.c @@ -55,14 +55,14 @@ int do_irqinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); U_BOOT_CMD( irqinfo, 1, 1, do_irqinfo, - "irqinfo - print information about IRQs\n", + "print information about IRQs", NULL ); #endif U_BOOT_CMD( sleep , 2, 1, do_sleep, - "sleep - delay execution for some time\n", + "delay execution for some time", "N\n" " - delay execution for N seconds (N is _decimal_ !!!)\n" ); diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c index 25c970257d0..473825edd84 100644 --- a/common/cmd_mmc.c +++ b/common/cmd_mmc.c @@ -36,6 +36,6 @@ int do_mmc (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( mmcinit, 1, 0, do_mmc, - "mmcinit - init mmc card\n", + "init mmc card", NULL ); diff --git a/common/cmd_mp.c b/common/cmd_mp.c index d8e3ab2b247..a0839c2fbb4 100644 --- a/common/cmd_mp.c +++ b/common/cmd_mp.c @@ -83,7 +83,7 @@ cpu_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( cpu, CONFIG_SYS_MAXARGS, 1, cpu_cmd, - "cpu - Multiprocessor CPU boot manipulation and release\n", + "Multiprocessor CPU boot manipulation and release", "<num> reset - Reset cpu <num>\n" "cpu <num> status - Status of cpu <num>\n" "cpu <num> release <addr> [args] - Release cpu <num> at <addr> with [args]\n" diff --git a/common/cmd_nand.c b/common/cmd_nand.c index 55d54669c2a..11f90966247 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -468,7 +468,7 @@ usage: } U_BOOT_CMD(nand, 5, 1, do_nand, - "nand - NAND sub-system\n", + "NAND sub-system", "info - show available NAND devices\n" "nand device [dev] - show or set current device\n" "nand read - addr off|partition size\n" @@ -664,7 +664,7 @@ usage: } U_BOOT_CMD(nboot, 4, 1, do_nandboot, - "nboot - boot from NAND device\n", + "boot from NAND device", "[partition] | [[[loadAddr] dev] offset]\n"); #endif @@ -923,7 +923,7 @@ int do_nand (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( nand, 5, 1, do_nand, - "nand - legacy NAND sub-system\n", + "legacy NAND sub-system", "info - show available NAND devices\n" "nand device [dev] - show or set current device\n" "nand read[.jffs2[s]] addr off size\n" @@ -1072,7 +1072,7 @@ int do_nandboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( nboot, 4, 1, do_nandboot, - "nboot - boot from NAND device\n", + "boot from NAND device", "loadAddr dev\n" ); diff --git a/common/cmd_net.c b/common/cmd_net.c index b627c3851a9..a6878491998 100644 --- a/common/cmd_net.c +++ b/common/cmd_net.c @@ -39,7 +39,7 @@ int do_bootp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( bootp, 3, 1, do_bootp, - "bootp\t- boot image via network using BOOTP/TFTP protocol\n", + "boot image via network using BOOTP/TFTP protocol", "[loadAddress] [[hostIPaddr:]bootfilename]\n" ); @@ -50,7 +50,7 @@ int do_tftpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( tftpboot, 3, 1, do_tftpb, - "tftpboot- boot image via network using TFTP protocol\n", + "boot image via network using TFTP protocol", "[loadAddress] [[hostIPaddr:]bootfilename]\n" ); @@ -61,7 +61,7 @@ int do_rarpb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( rarpboot, 3, 1, do_rarpb, - "rarpboot- boot image via network using RARP/TFTP protocol\n", + "boot image via network using RARP/TFTP protocol", "[loadAddress] [[hostIPaddr:]bootfilename]\n" ); @@ -73,7 +73,7 @@ int do_dhcp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( dhcp, 3, 1, do_dhcp, - "dhcp\t- boot image via network using DHCP/TFTP protocol\n", + "boot image via network using DHCP/TFTP protocol", "[loadAddress] [[hostIPaddr:]bootfilename]\n" ); #endif @@ -86,7 +86,7 @@ int do_nfs (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( nfs, 3, 1, do_nfs, - "nfs\t- boot image via network using NFS protocol\n", + "boot image via network using NFS protocol", "[loadAddress] [[hostIPaddr:]bootfilename]\n" ); #endif @@ -267,7 +267,7 @@ int do_ping (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( ping, 2, 1, do_ping, - "ping\t- send ICMP ECHO_REQUEST to network host\n", + "send ICMP ECHO_REQUEST to network host", "pingAddress\n" ); #endif @@ -311,7 +311,7 @@ int do_cdp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( cdp, 1, 1, do_cdp, - "cdp\t- Perform CDP network configuration\n", + "Perform CDP network configuration", ); #endif @@ -348,7 +348,7 @@ int do_sntp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( sntp, 2, 1, do_sntp, - "sntp\t- synchronize RTC via network\n", + "synchronize RTC via network", "[NTP server IP]\n" ); #endif diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c index af404176aa2..1fcb4c96af3 100644 --- a/common/cmd_nvedit.c +++ b/common/cmd_nvedit.c @@ -559,7 +559,7 @@ int do_saveenv (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( saveenv, 1, 0, do_saveenv, - "saveenv - save environment variables to persistent storage\n", + "save environment variables to persistent storage", NULL ); @@ -590,7 +590,7 @@ int envmatch (uchar *s1, int i2) U_BOOT_CMD( printenv, CONFIG_SYS_MAXARGS, 1, do_printenv, - "printenv- print environment variables\n", + "print environment variables", "\n - print values of all environment variables\n" "printenv name ...\n" " - print value of environment variable 'name'\n" @@ -598,7 +598,7 @@ U_BOOT_CMD( U_BOOT_CMD( setenv, CONFIG_SYS_MAXARGS, 0, do_setenv, - "setenv - set environment variables\n", + "set environment variables", "name value ...\n" " - set environment variable 'name' to 'value ...'\n" "setenv name\n" @@ -609,7 +609,7 @@ U_BOOT_CMD( U_BOOT_CMD( askenv, CONFIG_SYS_MAXARGS, 1, do_askenv, - "askenv - get environment variables from stdin\n", + "get environment variables from stdin", "name [message] [size]\n" " - get environment variable 'name' from stdin (max 'size' chars)\n" "askenv name\n" @@ -626,7 +626,7 @@ U_BOOT_CMD( int do_run (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); U_BOOT_CMD( run, CONFIG_SYS_MAXARGS, 1, do_run, - "run - run commands in an environment variable\n", + "run commands in an environment variable", "var [...]\n" " - run the commands in the environment variable(s) 'var'\n" ); diff --git a/common/cmd_onenand.c b/common/cmd_onenand.c index 6d43a779440..5832ff8d36b 100644 --- a/common/cmd_onenand.c +++ b/common/cmd_onenand.c @@ -471,7 +471,7 @@ usage: U_BOOT_CMD( onenand, 6, 1, do_onenand, - "onenand - OneNAND sub-system\n", + "OneNAND sub-system", "info - show available OneNAND devices\n" "onenand bad - show bad blocks\n" "onenand read[.oob] addr off size\n" diff --git a/common/cmd_otp.c b/common/cmd_otp.c index bdf2e6a8be6..e27bb29217d 100644 --- a/common/cmd_otp.c +++ b/common/cmd_otp.c @@ -155,7 +155,7 @@ int do_otp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(otp, 6, 0, do_otp, - "otp - One-Time-Programmable sub-system\n", + "One-Time-Programmable sub-system", "read <addr> <page> [count] [half]\n" "otp write [--force] <addr> <page> [count] [half]\n" " - read/write 'count' half-pages starting at page 'page' (offset 'half')\n"); diff --git a/common/cmd_pci.c b/common/cmd_pci.c index 110415e7dcc..4a9317f16c5 100644 --- a/common/cmd_pci.c +++ b/common/cmd_pci.c @@ -543,7 +543,7 @@ int do_pci (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( pci, 5, 1, do_pci, - "pci - list and access PCI Configuration Space\n", + "list and access PCI Configuration Space", "[bus] [long]\n" " - short or long list of PCI devices on bus 'bus'\n" "pci header b.d.f\n" diff --git a/common/cmd_pcmcia.c b/common/cmd_pcmcia.c index 23fad3bcb13..e448456971d 100644 --- a/common/cmd_pcmcia.c +++ b/common/cmd_pcmcia.c @@ -88,7 +88,7 @@ int do_pinit (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( pinit, 2, 0, do_pinit, - "pinit - PCMCIA sub-system\n", + "PCMCIA sub-system", "on - power on PCMCIA socket\n" "pinit off - power off PCMCIA socket\n" ); diff --git a/common/cmd_portio.c b/common/cmd_portio.c index b318ff09248..41b1991a275 100644 --- a/common/cmd_portio.c +++ b/common/cmd_portio.c @@ -93,7 +93,7 @@ int do_portio_out (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( out, 3, 1, do_portio_out, - "out - write datum to IO port\n", + "write datum to IO port", "[.b, .w, .l] port value\n - output to IO port\n" ); @@ -157,7 +157,7 @@ int do_portio_in (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( in, 2, 1, do_portio_in, - "in - read data from an IO port\n", + "read data from an IO port", "[.b, .w, .l] port\n" " - read datum from IO port\n" ); diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c index 4c8e61ab210..0e28c05b850 100644 --- a/common/cmd_reginfo.c +++ b/common/cmd_reginfo.c @@ -382,6 +382,6 @@ int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #if defined(CONFIG_CMD_REGINFO) U_BOOT_CMD( reginfo, 2, 1, do_reginfo, - "reginfo - print register information\n", + "print register information", ); #endif diff --git a/common/cmd_reiser.c b/common/cmd_reiser.c index a2f22866b65..14e4bd40e36 100644 --- a/common/cmd_reiser.c +++ b/common/cmd_reiser.c @@ -102,7 +102,7 @@ int do_reiserls (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( reiserls, 4, 1, do_reiserls, - "reiserls- list files in a directory (default /)\n", + "list files in a directory (default /)", "<interface> <dev[:part]> [directory]\n" " - list files from 'dev' on 'interface' in a 'directory'\n" ); @@ -232,7 +232,7 @@ int do_reiserload (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( reiserload, 6, 0, do_reiserload, - "reiserload- load binary file from a Reiser filesystem\n", + "load binary file from a Reiser filesystem", "<interface> <dev[:part]> [addr] [filename] [bytes]\n" " - load binary file 'filename' from 'dev' on 'interface'\n" " to address 'addr' from dos filesystem\n" diff --git a/common/cmd_sata.c b/common/cmd_sata.c index 3380768bbe7..e84977870ab 100644 --- a/common/cmd_sata.c +++ b/common/cmd_sata.c @@ -194,8 +194,8 @@ int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( sata, 5, 1, do_sata, - "sata - SATA sub system\n", - "init - init SATA sub system\n" + "SATA sub system", + "sata init - init SATA sub system\n" "sata info - show available SATA devices\n" "sata device [dev] - show or set current device\n" "sata part [dev] - print partition table\n" diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c index 8aae9fcac30..dd2c1ae73d6 100644 --- a/common/cmd_scsi.c +++ b/common/cmd_scsi.c @@ -616,7 +616,7 @@ void scsi_setup_inquiry(ccb * pccb) U_BOOT_CMD( scsi, 5, 1, do_scsi, - "scsi - SCSI sub-system\n", + "SCSI sub-system", "reset - reset SCSI controller\n" "scsi info - show available SCSI devices\n" "scsi scan - (re-)scan SCSI bus\n" @@ -628,6 +628,6 @@ U_BOOT_CMD( U_BOOT_CMD( scsiboot, 3, 1, do_scsiboot, - "scsiboot- boot from SCSI device\n", + "boot from SCSI device", "loadAddr dev:part\n" ); diff --git a/common/cmd_setexpr.c b/common/cmd_setexpr.c index 4125b183db1..9a5e720d68b 100644 --- a/common/cmd_setexpr.c +++ b/common/cmd_setexpr.c @@ -63,7 +63,7 @@ int do_setexpr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( setexpr, 5, 0, do_setexpr, - "setexpr - set environment variable as the result of eval expression\n", + "set environment variable as the result of eval expression", "name value1 <op> value2\n" " - set environment variable 'name' to the result of the evaluated\n" " express specified by <op>. <op> can be &, |, ^, +, -, *, /, %\n" diff --git a/common/cmd_sf.c b/common/cmd_sf.c index 6dc522d7a27..6a60b16805b 100644 --- a/common/cmd_sf.c +++ b/common/cmd_sf.c @@ -181,7 +181,7 @@ usage: U_BOOT_CMD( sf, 5, 1, do_spi_flash, - "sf - SPI flash sub-system\n", + "SPI flash sub-system", "probe [bus:]cs [hz] [mode] - init flash device on given SPI bus\n" " and chip select\n" "sf read addr offset len - read `len' bytes starting at\n" diff --git a/common/cmd_spi.c b/common/cmd_spi.c index 1f0727b4a24..746d14f21ac 100644 --- a/common/cmd_spi.c +++ b/common/cmd_spi.c @@ -138,7 +138,7 @@ int do_spi (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( sspi, 5, 1, do_spi, - "sspi - SPI utility commands\n", + "SPI utility commands", "<device> <bit_len> <dout> - Send <bit_len> bits from <dout> out the SPI\n" "<device> - Identifies the chip select of the device\n" "<bit_len> - Number of bits to send (base 10)\n" diff --git a/common/cmd_strings.c b/common/cmd_strings.c index 6f0cbca1a02..4517ba29e71 100644 --- a/common/cmd_strings.c +++ b/common/cmd_strings.c @@ -41,6 +41,6 @@ int do_strings(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(strings, 3, 1, do_strings, - "strings - display strings\n", + "display strings", "<addr> [byte count]\n" " - display strings at <addr> for at least [byte count] or first double NUL\n"); diff --git a/common/cmd_terminal.c b/common/cmd_terminal.c index 67a25467310..fd3dd485148 100644 --- a/common/cmd_terminal.c +++ b/common/cmd_terminal.c @@ -87,6 +87,6 @@ int do_terminal(cmd_tbl_t * cmd, int flag, int argc, char *argv[]) U_BOOT_CMD( terminal, 3, 1, do_terminal, - "terminal - start terminal emulator\n", + "start terminal emulator", "" ); diff --git a/common/cmd_ubi.c b/common/cmd_ubi.c index 305e2e17aea..b99fd58638b 100644 --- a/common/cmd_ubi.c +++ b/common/cmd_ubi.c @@ -600,7 +600,7 @@ static int do_ubi(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(ubi, 6, 1, do_ubi, - "ubi - ubi commands\n", + "ubi commands", "part [nand|nor|onenand] [part]" " - Show or set current partition\n" "ubi info [l[ayout]]" diff --git a/common/cmd_universe.c b/common/cmd_universe.c index ea977828a05..bfb91b58c60 100644 --- a/common/cmd_universe.c +++ b/common/cmd_universe.c @@ -364,7 +364,7 @@ int do_universe(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( universe, 8, 1, do_universe, - "universe- initialize and configure Turndra Universe\n", + "initialize and configure Turndra Universe", "init\n" " - initialize universe\n" "universe vme [vme_addr] [pci_addr] [size] [vam] [pms]\n" diff --git a/common/cmd_usb.c b/common/cmd_usb.c index 46d6eea572f..423a29f33e2 100644 --- a/common/cmd_usb.c +++ b/common/cmd_usb.c @@ -666,7 +666,7 @@ int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #ifdef CONFIG_USB_STORAGE U_BOOT_CMD( usb, 5, 1, do_usb, - "usb - USB sub-system\n", + "USB sub-system", "reset - reset (rescan) USB controller\n" "usb stop [f] - stop USB [f]=force stop\n" "usb tree - show USB device tree\n" @@ -682,14 +682,14 @@ U_BOOT_CMD( U_BOOT_CMD( usbboot, 3, 1, do_usbboot, - "usbboot - boot from USB device\n", + "boot from USB device", "loadAddr dev:part\n" ); #else U_BOOT_CMD( usb, 5, 1, do_usb, - "usb - USB sub-system\n", + "USB sub-system", "reset - reset (rescan) USB controller\n" "usb tree - show USB device tree\n" "usb info [dev] - show available USB devices\n" diff --git a/common/cmd_vfd.c b/common/cmd_vfd.c index ef4dd835b52..84d9530aa99 100644 --- a/common/cmd_vfd.c +++ b/common/cmd_vfd.c @@ -67,7 +67,7 @@ int do_vfd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( vfd, 2, 0, do_vfd, - "vfd - load a bitmap to the VFDs on TRAB\n", + "load a bitmap to the VFDs on TRAB", "/N\n" " - load bitmap N to the VFDs (N is _decimal_ !!!)\n" "vfd ADDR\n" diff --git a/common/cmd_ximg.c b/common/cmd_ximg.c index 2753389eaee..a45d2480e29 100644 --- a/common/cmd_ximg.c +++ b/common/cmd_ximg.c @@ -180,7 +180,7 @@ do_imgextract(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(imxtract, 4, 1, do_imgextract, - "imxtract- extract a part of a multi-image\n", + "extract a part of a multi-image", "addr part [dest]\n" " - extract <part> from legacy image at <addr> and copy to <dest>\n" #if defined(CONFIG_FIT) diff --git a/common/cmd_yaffs2.c b/common/cmd_yaffs2.c index 3732f7f98ef..c47ea769fea 100644 --- a/common/cmd_yaffs2.c +++ b/common/cmd_yaffs2.c @@ -142,72 +142,72 @@ int do_ydump (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( ymount, 3, 0, do_ymount, - "ymount\t- mount yaffs\n", + "mount yaffs", "\n" ); U_BOOT_CMD( yumount, 3, 0, do_yumount, - "yumount\t- unmount yaffs\n", + "unmount yaffs", "\n" ); U_BOOT_CMD( yls, 4, 0, do_yls, - "yls\t- yaffs ls\n", + "yaffs ls", "[-l] name\n" ); U_BOOT_CMD( yrd, 2, 0, do_yrd, - "yrd\t- read file from yaffs\n", + "read file from yaffs", "filename\n" ); U_BOOT_CMD( ywr, 4, 0, do_ywr, - "ywr\t- write file to yaffs\n", + "write file to yaffs", "filename value num_vlues\n" ); U_BOOT_CMD( yrdm, 3, 0, do_yrdm, - "yrdm\t- read file to memory from yaffs\n", + "read file to memory from yaffs", "filename offset\n" ); U_BOOT_CMD( ywrm, 4, 0, do_ywrm, - "ywrm\t- write file from memory to yaffs\n", + "write file from memory to yaffs", "filename offset size\n" ); U_BOOT_CMD( ymkdir, 2, 0, do_ymkdir, - "ymkdir\t- YAFFS mkdir\n", + "YAFFS mkdir", "dirname\n" ); U_BOOT_CMD( yrmdir, 2, 0, do_yrmdir, - "yrmdir\t- YAFFS rmdir\n", + "YAFFS rmdir", "dirname\n" ); U_BOOT_CMD( yrm, 2, 0, do_yrm, - "yrm\t- YAFFS rm\n", + "YAFFS rm", "path\n" ); U_BOOT_CMD( ymv, 4, 0, do_ymv, - "ymv\t- YAFFS mv\n", + "YAFFS mv", "oldPath newPath\n" ); U_BOOT_CMD( ydump, 2, 0, do_ydump, - "ydump\t- YAFFS device struct\n", + "YAFFS device struct", "dirname\n" ); diff --git a/common/command.c b/common/command.c index c3966484f9a..3b9ccc9ed08 100644 --- a/common/command.c +++ b/common/command.c @@ -38,7 +38,7 @@ do_version (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( version, 1, 1, do_version, - "version - print monitor version\n", + "print monitor version", NULL ); @@ -71,7 +71,7 @@ do_echo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( echo, CONFIG_SYS_MAXARGS, 1, do_echo, - "echo - echo args to console\n", + "echo args to console", "[args..]\n" " - echo args to console; \\c suppresses newline\n" ); @@ -203,7 +203,7 @@ do_test (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( test, CONFIG_SYS_MAXARGS, 1, do_test, - "test - minimal test like /bin/sh\n", + "minimal test like /bin/sh", "[args..]\n" " - test functionality\n" ); @@ -222,7 +222,7 @@ do_exit (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( exit, 2, 1, do_exit, - "exit - exit script\n", + "exit script", " - exit functionality\n" ); @@ -277,7 +277,8 @@ int do_help (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) return 1; if (usage == NULL) continue; - puts (usage); + printf("%-*s- %s\n", CONFIG_SYS_HELP_CMD_WIDTH, + cmd_array[i]->name, usage); } return 0; } @@ -299,7 +300,7 @@ int do_help (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) putc ('\n'); #else /* no long help available */ if (cmdtp->usage) - puts (cmdtp->usage); + printf ("%s - %s\n", cmdtp->name, cmdtp->usage); #endif /* CONFIG_SYS_LONGHELP */ } else { printf ("Unknown command '%s' - try 'help'" @@ -315,7 +316,7 @@ int do_help (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( help, CONFIG_SYS_MAXARGS, 1, do_help, - "help - print online help\n", + "print online help", "[command ...]\n" " - show help information (for 'command')\n" "'help' prints online help for the monitor commands.\n\n" @@ -328,13 +329,13 @@ U_BOOT_CMD( #ifdef CONFIG_SYS_LONGHELP cmd_tbl_t __u_boot_cmd_question_mark Struct_Section = { "?", CONFIG_SYS_MAXARGS, 1, do_help, - "? - alias for 'help'\n", + "alias for 'help'", NULL }; #else cmd_tbl_t __u_boot_cmd_question_mark Struct_Section = { "?", CONFIG_SYS_MAXARGS, 1, do_help, - "? - alias for 'help'\n" + "alias for 'help'" }; #endif /* CONFIG_SYS_LONGHELP */ @@ -381,7 +382,7 @@ cmd_tbl_t *find_cmd (const char *cmd) void cmd_usage(cmd_tbl_t *cmdtp) { - printf("Usage:\n%s\n", cmdtp->usage); + printf("Usage:\n%s - %s\n\n", cmdtp->name, cmdtp->usage); } #ifdef CONFIG_AUTO_COMPLETE diff --git a/common/hush.c b/common/hush.c index dbb4035613d..01b74d7829e 100644 --- a/common/hush.c +++ b/common/hush.c @@ -3625,7 +3625,7 @@ int do_showvar (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( showvar, CONFIG_SYS_MAXARGS, 1, do_showvar, - "showvar- print local hushshell variables\n", + "print local hushshell variables", "\n - print values of all hushshell variables\n" "showvar name ...\n" " - print value of hushshell variable 'name'\n" diff --git a/common/kgdb.c b/common/kgdb.c index adc15dd79eb..888b96b68d6 100644 --- a/common/kgdb.c +++ b/common/kgdb.c @@ -575,7 +575,7 @@ do_kgdb(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( kgdb, CONFIG_SYS_MAXARGS, 1, do_kgdb, - "kgdb - enter gdb remote debug mode\n", + "enter gdb remote debug mode", "[arg0 arg1 .. argN]\n" " - executes a breakpoint so that kgdb mode is\n" " entered via the exception handler. To return\n" diff --git a/common/lcd.c b/common/lcd.c index ae79051d1eb..5f73247f42c 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -426,7 +426,7 @@ static int lcd_clear (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( cls, 1, 1, lcd_clear, - "cls - clear screen\n", + "clear screen", NULL ); diff --git a/cpu/mpc512x/speed.c b/cpu/mpc512x/speed.c index 542bf21c774..5992111c1d4 100644 --- a/cpu/mpc512x/speed.c +++ b/cpu/mpc512x/speed.c @@ -137,7 +137,7 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(clocks, 1, 0, do_clocks, - "clocks - print clock configuration\n", + "print clock configuration", " clocks\n" ); diff --git a/cpu/mpc83xx/ecc.c b/cpu/mpc83xx/ecc.c index 47c8937aa6c..f3942b411f6 100644 --- a/cpu/mpc83xx/ecc.c +++ b/cpu/mpc83xx/ecc.c @@ -355,7 +355,7 @@ int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(ecc, 4, 0, do_ecc, - "ecc - support for DDR ECC features\n", + "support for DDR ECC features", "status - print out status info\n" "ecc captureclear - clear capture regs data\n" "ecc sbecnt <val> - set Single-Bit Error counter\n" diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c index 4230099c0ce..9b7e7b576e0 100644 --- a/cpu/mpc83xx/speed.c +++ b/cpu/mpc83xx/speed.c @@ -544,6 +544,6 @@ int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } U_BOOT_CMD(clocks, 1, 0, do_clocks, - "clocks - print clock configuration\n", + "print clock configuration", " clocks\n" ); diff --git a/cpu/nios2/sysid.c b/cpu/nios2/sysid.c index afd5d83d95d..251204beb7b 100644 --- a/cpu/nios2/sysid.c +++ b/cpu/nios2/sysid.c @@ -52,7 +52,7 @@ int do_sysid (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( sysid, 1, 1, do_sysid, - "sysid - display Nios-II system id\n\n", + "display Nios-II system id", "\n - display Nios-II system id\n" ); #endif /* CONFIG_SYS_NIOS_SYSID_BASE */ diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c index f80baeb1fa6..1c5e314d9d5 100644 --- a/drivers/gpio/pca953x.c +++ b/drivers/gpio/pca953x.c @@ -209,7 +209,7 @@ int do_pca953x(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( pca953x, 5, 1, do_pca953x, - "pca953x - pca953x gpio access\n", + "pca953x gpio access", "device [dev]\n" " - show or set current device address\n" #ifdef CONFIG_CMD_PCA953X_INFO diff --git a/drivers/misc/ds4510.c b/drivers/misc/ds4510.c index 958ff684541..8b5fbbc4565 100644 --- a/drivers/misc/ds4510.c +++ b/drivers/misc/ds4510.c @@ -390,7 +390,7 @@ int do_ds4510(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( ds4510, 6, 1, do_ds4510, - "ds4510 - ds4510 eeprom/seeprom/sram/gpio access\n", + "ds4510 eeprom/seeprom/sram/gpio access", "device [dev]\n" " - show or set current device address\n" #ifdef CONFIG_CMD_DS4510_INFO diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c index 7b29fd71601..e90a4a5fe93 100644 --- a/drivers/qe/qe.c +++ b/drivers/qe/qe.c @@ -461,7 +461,7 @@ static int qe_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) U_BOOT_CMD( qe, 4, 0, qe_cmd, - "qe - QUICC Engine commands\n", + "QUICC Engine commands", "fw <addr> [<length>] - Upload firmware binary at address <addr> to " "the QE,\n\twith optional length <length> verification.\n" ); diff --git a/include/command.h b/include/command.h index 58992e9796f..d7321af92bc 100644 --- a/include/command.h +++ b/include/command.h @@ -33,6 +33,11 @@ #define NULL 0 #endif +/* Default to a width of 8 characters for help message command width */ +#ifndef CONFIG_SYS_HELP_CMD_WIDTH +#define CONFIG_SYS_HELP_CMD_WIDTH 8 +#endif + #ifndef __ASSEMBLY__ /* * Monitor Command Table |