diff options
155 files changed, 8298 insertions, 865 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index b24ba19b764..36b47b741ad 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -586,6 +586,7 @@ Stefano Babic <sbabic@denx.de> trizepsiv xscale/pxa twister omap3 vision2 i.MX51 + woodburn i.MX35 Lukasz Dalek <luk0104@gmail.com> @@ -316,6 +316,7 @@ LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o endif LIBS-y += drivers/rtc/librtc.o LIBS-y += drivers/serial/libserial.o +LIBS-y += drivers/sound/libsound.o LIBS-$(CONFIG_GENERIC_LPC_TPM) += drivers/tpm/libtpm.o LIBS-y += drivers/twserial/libtws.o LIBS-y += drivers/usb/eth/libusb_eth.o @@ -869,6 +870,7 @@ clobber: tidy @rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map} @rm -f $(obj)spl/{u-boot-spl.lds,u-boot.lst} @rm -f $(obj)MLO + @rm -f $(obj)SPL @rm -f $(obj)tools/xway-swap-bytes @rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c @rm -f $(obj)arch/powerpc/cpu/mpc83xx/ddr-gen?.c diff --git a/arch/arm/cpu/arm1136/config.mk b/arch/arm/cpu/arm1136/config.mk index efee0d1dca6..9092d914f60 100644 --- a/arch/arm/cpu/arm1136/config.mk +++ b/arch/arm/cpu/arm1136/config.mk @@ -31,3 +31,6 @@ PLATFORM_CPPFLAGS += -march=armv5 # ========================================================================= PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT) +ifdef CONFIG_SPL_BUILD +ALL-y += $(OBJTREE)/SPL +endif diff --git a/arch/arm/cpu/arm1136/cpu.c b/arch/arm/cpu/arm1136/cpu.c index b98e3d9face..32a4c244c57 100644 --- a/arch/arm/cpu/arm1136/cpu.c +++ b/arch/arm/cpu/arm1136/cpu.c @@ -141,16 +141,6 @@ void flush_cache(unsigned long start, unsigned long size) flush_dcache_range(start, start + size); } -void enable_caches(void) -{ -#ifndef CONFIG_SYS_ICACHE_OFF - icache_enable(); -#endif -#ifndef CONFIG_SYS_DCACHE_OFF - dcache_enable(); -#endif -} - #else /* #ifndef CONFIG_SYS_DCACHE_OFF */ void invalidate_dcache_all(void) { @@ -172,3 +162,15 @@ void flush_cache(unsigned long start, unsigned long size) { } #endif /* #ifndef CONFIG_SYS_DCACHE_OFF */ + +#if !defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF) +void enable_caches(void) +{ +#ifndef CONFIG_SYS_ICACHE_OFF + icache_enable(); +#endif +#ifndef CONFIG_SYS_DCACHE_OFF + dcache_enable(); +#endif +} +#endif diff --git a/arch/arm/cpu/arm1136/mx35/Makefile b/arch/arm/cpu/arm1136/mx35/Makefile index 469397ca430..f4ababbe5b1 100644 --- a/arch/arm/cpu/arm1136/mx35/Makefile +++ b/arch/arm/cpu/arm1136/mx35/Makefile @@ -30,6 +30,7 @@ LIB = $(obj)lib$(SOC).o COBJS += generic.o COBJS += timer.o COBJS += iomux.o +COBJS += mx35_sdram.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/arch/arm/cpu/arm1136/mx35/generic.c b/arch/arm/cpu/arm1136/mx35/generic.c index 41e9639d9c4..98aa4d15bcc 100644 --- a/arch/arm/cpu/arm1136/mx35/generic.c +++ b/arch/arm/cpu/arm1136/mx35/generic.c @@ -35,6 +35,7 @@ #include <fsl_esdhc.h> #endif #include <netdev.h> +#include <spl.h> #define CLK_CODE(arm, ahb, sel) (((arm) << 16) + ((ahb) << 8) + (sel)) #define CLK_CODE_ARM(c) (((c) >> 16) & 0xFF) @@ -492,3 +493,77 @@ void reset_cpu(ulong addr) struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE_ADDR; writew(4, &wdog->wcr); } + +#define RCSR_MEM_CTL_WEIM 0 +#define RCSR_MEM_CTL_NAND 1 +#define RCSR_MEM_CTL_ATA 2 +#define RCSR_MEM_CTL_EXPANSION 3 +#define RCSR_MEM_TYPE_NOR 0 +#define RCSR_MEM_TYPE_ONENAND 2 +#define RCSR_MEM_TYPE_SD 0 +#define RCSR_MEM_TYPE_I2C 2 +#define RCSR_MEM_TYPE_SPI 3 + +u32 spl_boot_device(void) +{ + struct ccm_regs *ccm = + (struct ccm_regs *)IMX_CCM_BASE; + + u32 rcsr = readl(&ccm->rcsr); + u32 mem_type, mem_ctl; + + /* In external mode, no boot device is returned */ + if ((rcsr >> 10) & 0x03) + return BOOT_DEVICE_NONE; + + mem_ctl = (rcsr >> 25) & 0x03; + mem_type = (rcsr >> 23) & 0x03; + + switch (mem_ctl) { + case RCSR_MEM_CTL_WEIM: + switch (mem_type) { + case RCSR_MEM_TYPE_NOR: + return BOOT_DEVICE_NOR; + case RCSR_MEM_TYPE_ONENAND: + return BOOT_DEVICE_ONE_NAND; + default: + return BOOT_DEVICE_NONE; + } + case RCSR_MEM_CTL_NAND: + return BOOT_DEVICE_NAND; + case RCSR_MEM_CTL_EXPANSION: + switch (mem_type) { + case RCSR_MEM_TYPE_SD: + return BOOT_DEVICE_MMC1; + case RCSR_MEM_TYPE_I2C: + return BOOT_DEVICE_I2C; + case RCSR_MEM_TYPE_SPI: + return BOOT_DEVICE_SPI; + default: + return BOOT_DEVICE_NONE; + } + } + + return BOOT_DEVICE_NONE; +} + +#ifdef CONFIG_SPL_BUILD +u32 spl_boot_mode(void) +{ + switch (spl_boot_device()) { + case BOOT_DEVICE_MMC1: +#ifdef CONFIG_SPL_FAT_SUPPORT + return MMCSD_MODE_FAT; +#else + return MMCSD_MODE_RAW; +#endif + break; + case BOOT_DEVICE_NAND: + return 0; + break; + default: + puts("spl: ERROR: unsupported device\n"); + hang(); + } +} +#endif diff --git a/arch/arm/cpu/arm1136/mx35/mx35_sdram.c b/arch/arm/cpu/arm1136/mx35/mx35_sdram.c new file mode 100644 index 00000000000..f7e682c8c5b --- /dev/null +++ b/arch/arm/cpu/arm1136/mx35/mx35_sdram.c @@ -0,0 +1,137 @@ +/* + * Copyright (C) 2012, Stefano Babic <sbabic@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/imx-regs.h> +#include <linux/types.h> +#include <asm/arch/sys_proto.h> + +#define ESDCTL_DDR2_EMR2 0x04000000 +#define ESDCTL_DDR2_EMR3 0x06000000 +#define ESDCTL_PRECHARGE 0x00000400 +#define ESDCTL_DDR2_EN_DLL 0x02000400 +#define ESDCTL_DDR2_RESET_DLL 0x00000333 +#define ESDCTL_DDR2_MR 0x00000233 +#define ESDCTL_DDR2_OCD_DEFAULT 0x02000780 + +enum { + SMODE_NORMAL = 0, + SMODE_PRECHARGE, + SMODE_AUTO_REFRESH, + SMODE_LOAD_REG, + SMODE_MANUAL_REFRESH +}; + +#define set_mode(x, en, m) (x | (en << 31) | (m << 28)) + +static inline void dram_wait(unsigned int count) +{ + volatile unsigned int wait = count; + + while (wait--) + ; + +} + +void mx3_setup_sdram_bank(u32 start_address, u32 ddr2_config, + u32 row, u32 col, u32 dsize, u32 refresh) +{ + struct esdc_regs *esdc = (struct esdc_regs *)ESDCTL_BASE_ADDR; + u32 *cfg_reg, *ctl_reg; + u32 val; + u32 ctlval; + + switch (start_address) { + case CSD0_BASE_ADDR: + cfg_reg = &esdc->esdcfg0; + ctl_reg = &esdc->esdctl0; + break; + case CSD1_BASE_ADDR: + cfg_reg = &esdc->esdcfg1; + ctl_reg = &esdc->esdctl1; + break; + default: + return; + } + + /* The MX35 supports 11 up to 14 rows */ + if (row < 11 || row > 14 || col < 8 || col > 10) + return; + ctlval = (row - 11) << 24 | (col - 8) << 20 | (dsize << 16); + + /* Initialize MISC register for DDR2 */ + val = ESDC_MISC_RST | ESDC_MISC_MDDR_EN | ESDC_MISC_MDDR_DL_RST | + ESDC_MISC_DDR_EN | ESDC_MISC_DDR2_EN; + writel(val, &esdc->esdmisc); + val &= ~(ESDC_MISC_RST | ESDC_MISC_MDDR_DL_RST); + writel(val, &esdc->esdmisc); + + /* + * according to DDR2 specs, wait a while before + * the PRECHARGE_ALL command + */ + dram_wait(0x20000); + + /* Load DDR2 config and timing */ + writel(ddr2_config, cfg_reg); + + /* Precharge ALL */ + writel(set_mode(ctlval, 1, SMODE_PRECHARGE), + ctl_reg); + writel(0xda, start_address + ESDCTL_PRECHARGE); + + /* Load mode */ + writel(set_mode(ctlval, 1, SMODE_LOAD_REG), + ctl_reg); + writeb(0xda, start_address + ESDCTL_DDR2_EMR2); /* EMRS2 */ + writeb(0xda, start_address + ESDCTL_DDR2_EMR3); /* EMRS3 */ + writeb(0xda, start_address + ESDCTL_DDR2_EN_DLL); /* Enable DLL */ + writeb(0xda, start_address + ESDCTL_DDR2_RESET_DLL); /* Reset DLL */ + + /* Precharge ALL */ + writel(set_mode(ctlval, 1, SMODE_PRECHARGE), + ctl_reg); + writel(0xda, start_address + ESDCTL_PRECHARGE); + + /* Set mode auto refresh : at least two refresh are required */ + writel(set_mode(ctlval, 1, SMODE_AUTO_REFRESH), + ctl_reg); + writel(0xda, start_address); + writel(0xda, start_address); + + writel(set_mode(ctlval, 1, SMODE_LOAD_REG), + ctl_reg); + writeb(0xda, start_address + ESDCTL_DDR2_MR); + writeb(0xda, start_address + ESDCTL_DDR2_OCD_DEFAULT); + + /* OCD mode exit */ + writeb(0xda, start_address + ESDCTL_DDR2_EN_DLL); /* Enable DLL */ + + /* Set normal mode */ + writel(set_mode(ctlval, 1, SMODE_NORMAL) | refresh, + ctl_reg); + + dram_wait(0x20000); + + /* Do not set delay lines, only for MDDR */ +} diff --git a/arch/arm/cpu/arm1136/start.S b/arch/arm/cpu/arm1136/start.S index 3752af9ddd1..5d3b4c2299e 100644 --- a/arch/arm/cpu/arm1136/start.S +++ b/arch/arm/cpu/arm1136/start.S @@ -100,6 +100,10 @@ _TEXT_BASE: _bss_start_ofs: .word __bss_start - _start +.global _image_copy_end_ofs +_image_copy_end_ofs: + .word __image_copy_end - _start + .globl _bss_end_ofs _bss_end_ofs: .word __bss_end__ - _start @@ -193,7 +197,7 @@ stack_setup: moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */ beq clear_bss /* skip relocation */ mov r1, r6 /* r1 <- scratch for copy_loop */ - ldr r3, _bss_start_ofs + ldr r3, _image_copy_end_ofs add r2, r0, r3 /* r2 <- source end address */ copy_loop: @@ -241,15 +245,28 @@ fixnext: add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ cmp r2, r3 blo fixloop + b clear_bss + +_rel_dyn_start_ofs: + .word __rel_dyn_start - _start +_rel_dyn_end_ofs: + .word __rel_dyn_end - _start +_dynsym_start_ofs: + .word __dynsym_start - _start #endif clear_bss: -#ifndef CONFIG_SPL_BUILD +#ifdef CONFIG_SPL_BUILD + /* No relocation for SPL */ + ldr r0, =__bss_start + ldr r1, =__bss_end__ +#else ldr r0, _bss_start_ofs ldr r1, _bss_end_ofs mov r4, r6 /* reloc addr */ add r0, r0, r4 add r1, r1, r4 +#endif mov r2, #0x00000000 /* clear */ clbss_l:cmp r0, r1 /* clear loop... */ @@ -258,7 +275,6 @@ clbss_l:cmp r0, r1 /* clear loop... */ add r0, r0, #4 b clbss_l clbss_e: -#endif /* #ifndef CONFIG_SPL_BUILD */ /* * We are done. Do not return, instead branch to second part of board @@ -273,7 +289,7 @@ _nand_boot_ofs: #else jump_2_ram: ldr r0, _board_init_r_ofs - ldr r1, _TEXT_BASE + adr r1, _start add lr, r0, r1 add lr, lr, r9 /* setup parameters for board_init_r */ @@ -286,13 +302,6 @@ _board_init_r_ofs: .word board_init_r - _start #endif -_rel_dyn_start_ofs: - .word __rel_dyn_start - _start -_rel_dyn_end_ofs: - .word __rel_dyn_end - _start -_dynsym_start_ofs: - .word __dynsym_start - _start - /* ************************************************************************* * diff --git a/arch/arm/cpu/arm1136/u-boot-spl.lds b/arch/arm/cpu/arm1136/u-boot-spl.lds new file mode 100644 index 00000000000..a0462ab97a1 --- /dev/null +++ b/arch/arm/cpu/arm1136/u-boot-spl.lds @@ -0,0 +1,62 @@ +/* + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * Aneesh V <aneesh@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\ + LENGTH = CONFIG_SPL_MAX_SIZE } +MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \ + LENGTH = CONFIG_SPL_BSS_MAX_SIZE } + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + .text : + { + __start = .; + arch/arm/cpu/arm1136/start.o (.text) + *(.text*) + } >.sram + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram + + . = ALIGN(4); + .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram + . = ALIGN(4); + __image_copy_end = .; + _end = .; + + .bss : + { + . = ALIGN(4); + __bss_start = .; + *(.bss*) + . = ALIGN(4); + __bss_end__ = .; + } >.sdram +} diff --git a/arch/arm/cpu/arm1176/s3c64xx/Makefile b/arch/arm/cpu/arm1176/s3c64xx/Makefile index 0785b194c50..266a0739ce8 100644 --- a/arch/arm/cpu/arm1176/s3c64xx/Makefile +++ b/arch/arm/cpu/arm1176/s3c64xx/Makefile @@ -31,7 +31,7 @@ LIB = $(obj)lib$(SOC).o SOBJS = reset.o COBJS-$(CONFIG_S3C6400) += cpu_init.o speed.o -COBJS-y += timer.o +COBJS-y += timer.o init.o OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y)) diff --git a/arch/arm/cpu/arm1176/s3c64xx/init.c b/arch/arm/cpu/arm1176/s3c64xx/init.c new file mode 100644 index 00000000000..f113d8ed414 --- /dev/null +++ b/arch/arm/cpu/arm1176/s3c64xx/init.c @@ -0,0 +1,26 @@ +/* + * (C) Copyright 2012 Ashok Kumar Reddy Kourla + * ashokkourla2000@gmail.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include<common.h> + +int arch_cpu_init(void) +{ + icache_enable(); + + return 0; +} diff --git a/arch/arm/cpu/armv7/cache_v7.c b/arch/arm/cpu/armv7/cache_v7.c index 1b4e808a79c..5f6d0396f3a 100644 --- a/arch/arm/cpu/armv7/cache_v7.c +++ b/arch/arm/cpu/armv7/cache_v7.c @@ -297,6 +297,12 @@ void arm_init_before_mmu(void) v7_inval_tlb(); } +void mmu_page_table_flush(unsigned long start, unsigned long stop) +{ + flush_dcache_range(start, stop); + v7_inval_tlb(); +} + /* * Flush range from all levels of d-cache/unified-cache used: * Affects the range [start, start + size - 1] @@ -329,6 +335,11 @@ void arm_init_before_mmu(void) void flush_cache(unsigned long start, unsigned long size) { } + +void mmu_page_table_flush(unsigned long start, unsigned long stop) +{ +} + #endif /* #ifndef CONFIG_SYS_DCACHE_OFF */ #ifndef CONFIG_SYS_ICACHE_OFF diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c index 4f3b451be99..fe61f88af49 100644 --- a/arch/arm/cpu/armv7/exynos/clock.c +++ b/arch/arm/cpu/armv7/exynos/clock.c @@ -25,42 +25,32 @@ #include <asm/io.h> #include <asm/arch/clock.h> #include <asm/arch/clk.h> - -/* exynos4: return pll clock frequency */ -static unsigned long exynos4_get_pll_clk(int pllreg) +#include <asm/arch/periph.h> + +/* Epll Clock division values to achive different frequency output */ +static struct set_epll_con_val exynos5_epll_div[] = { + { 192000000, 0, 48, 3, 1, 0 }, + { 180000000, 0, 45, 3, 1, 0 }, + { 73728000, 1, 73, 3, 3, 47710 }, + { 67737600, 1, 90, 4, 3, 20762 }, + { 49152000, 0, 49, 3, 3, 9961 }, + { 45158400, 0, 45, 3, 3, 10381 }, + { 180633600, 0, 45, 3, 1, 10381 } +}; + +/* exynos: return pll clock frequency */ +static int exynos_get_pll_clk(int pllreg, unsigned int r, unsigned int k) { - struct exynos4_clock *clk = - (struct exynos4_clock *)samsung_get_base_clock(); - unsigned long r, m, p, s, k = 0, mask, fout; + unsigned long m, p, s = 0, mask, fout; unsigned int freq; - - switch (pllreg) { - case APLL: - r = readl(&clk->apll_con0); - break; - case MPLL: - r = readl(&clk->mpll_con0); - break; - case EPLL: - r = readl(&clk->epll_con0); - k = readl(&clk->epll_con1); - break; - case VPLL: - r = readl(&clk->vpll_con0); - k = readl(&clk->vpll_con1); - break; - default: - printf("Unsupported PLL (%d)\n", pllreg); - return 0; - } - /* * APLL_CON: MIDV [25:16] * MPLL_CON: MIDV [25:16] * EPLL_CON: MIDV [24:16] * VPLL_CON: MIDV [24:16] + * BPLL_CON: MIDV [25:16]: Exynos5 */ - if (pllreg == APLL || pllreg == MPLL) + if (pllreg == APLL || pllreg == MPLL || pllreg == BPLL) mask = 0x3ff; else mask = 0x1ff; @@ -92,13 +82,43 @@ static unsigned long exynos4_get_pll_clk(int pllreg) return fout; } +/* exynos4: return pll clock frequency */ +static unsigned long exynos4_get_pll_clk(int pllreg) +{ + struct exynos4_clock *clk = + (struct exynos4_clock *)samsung_get_base_clock(); + unsigned long r, k = 0; + + switch (pllreg) { + case APLL: + r = readl(&clk->apll_con0); + break; + case MPLL: + r = readl(&clk->mpll_con0); + break; + case EPLL: + r = readl(&clk->epll_con0); + k = readl(&clk->epll_con1); + break; + case VPLL: + r = readl(&clk->vpll_con0); + k = readl(&clk->vpll_con1); + break; + default: + printf("Unsupported PLL (%d)\n", pllreg); + return 0; + } + + return exynos_get_pll_clk(pllreg, r, k); +} + /* exynos5: return pll clock frequency */ static unsigned long exynos5_get_pll_clk(int pllreg) { struct exynos5_clock *clk = (struct exynos5_clock *)samsung_get_base_clock(); - unsigned long r, m, p, s, k = 0, mask, fout; - unsigned int freq, pll_div2_sel, fout_sel; + unsigned long r, k = 0, fout; + unsigned int pll_div2_sel, fout_sel; switch (pllreg) { case APLL: @@ -123,41 +143,7 @@ static unsigned long exynos5_get_pll_clk(int pllreg) return 0; } - /* - * APLL_CON: MIDV [25:16] - * MPLL_CON: MIDV [25:16] - * EPLL_CON: MIDV [24:16] - * VPLL_CON: MIDV [24:16] - * BPLL_CON: MIDV [25:16] - */ - if (pllreg == APLL || pllreg == MPLL || pllreg == BPLL) - mask = 0x3ff; - else - mask = 0x1ff; - - m = (r >> 16) & mask; - - /* PDIV [13:8] */ - p = (r >> 8) & 0x3f; - /* SDIV [2:0] */ - s = r & 0x7; - - freq = CONFIG_SYS_CLK_FREQ; - - if (pllreg == EPLL) { - k = k & 0xffff; - /* FOUT = (MDIV + K / 65536) * FIN / (PDIV * 2^SDIV) */ - fout = (m + k / 65536) * (freq / (p * (1 << s))); - } else if (pllreg == VPLL) { - k = k & 0xfff; - /* FOUT = (MDIV + K / 1024) * FIN / (PDIV * 2^SDIV) */ - fout = (m + k / 1024) * (freq / (p * (1 << s))); - } else { - if (s < 1) - s = 1; - /* FOUT = MDIV * FIN / (PDIV * 2^(SDIV - 1)) */ - fout = m * (freq / (p * (1 << (s - 1)))); - } + fout = exynos_get_pll_clk(pllreg, r, k); /* According to the user manual, in EVT1 MPLL and BPLL always gives * 1.6GHz clock, so divide by 2 to get 800MHz MPLL clock.*/ @@ -732,6 +718,209 @@ static unsigned long exynos5_get_i2c_clk(void) return aclk_66; } +int exynos5_set_epll_clk(unsigned long rate) +{ + unsigned int epll_con, epll_con_k; + unsigned int i; + unsigned int lockcnt; + unsigned int start; + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + + epll_con = readl(&clk->epll_con0); + epll_con &= ~((EPLL_CON0_LOCK_DET_EN_MASK << + EPLL_CON0_LOCK_DET_EN_SHIFT) | + EPLL_CON0_MDIV_MASK << EPLL_CON0_MDIV_SHIFT | + EPLL_CON0_PDIV_MASK << EPLL_CON0_PDIV_SHIFT | + EPLL_CON0_SDIV_MASK << EPLL_CON0_SDIV_SHIFT); + + for (i = 0; i < ARRAY_SIZE(exynos5_epll_div); i++) { + if (exynos5_epll_div[i].freq_out == rate) + break; + } + + if (i == ARRAY_SIZE(exynos5_epll_div)) + return -1; + + epll_con_k = exynos5_epll_div[i].k_dsm << 0; + epll_con |= exynos5_epll_div[i].en_lock_det << + EPLL_CON0_LOCK_DET_EN_SHIFT; + epll_con |= exynos5_epll_div[i].m_div << EPLL_CON0_MDIV_SHIFT; + epll_con |= exynos5_epll_div[i].p_div << EPLL_CON0_PDIV_SHIFT; + epll_con |= exynos5_epll_div[i].s_div << EPLL_CON0_SDIV_SHIFT; + + /* + * Required period ( in cycles) to genarate a stable clock output. + * The maximum clock time can be up to 3000 * PDIV cycles of PLLs + * frequency input (as per spec) + */ + lockcnt = 3000 * exynos5_epll_div[i].p_div; + + writel(lockcnt, &clk->epll_lock); + writel(epll_con, &clk->epll_con0); + writel(epll_con_k, &clk->epll_con1); + + start = get_timer(0); + + while (!(readl(&clk->epll_con0) & + (0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT))) { + if (get_timer(start) > TIMEOUT_EPLL_LOCK) { + debug("%s: Timeout waiting for EPLL lock\n", __func__); + return -1; + } + } + return 0; +} + +void exynos5_set_i2s_clk_source(void) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + + clrsetbits_le32(&clk->src_peric1, AUDIO1_SEL_MASK, + (CLK_SRC_SCLK_EPLL)); +} + +int exynos5_set_i2s_clk_prescaler(unsigned int src_frq, + unsigned int dst_frq) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + unsigned int div; + + if ((dst_frq == 0) || (src_frq == 0)) { + debug("%s: Invalid requency input for prescaler\n", __func__); + debug("src frq = %d des frq = %d ", src_frq, dst_frq); + return -1; + } + + div = (src_frq / dst_frq); + if (div > AUDIO_1_RATIO_MASK) { + debug("%s: Frequency ratio is out of range\n", __func__); + debug("src frq = %d des frq = %d ", src_frq, dst_frq); + return -1; + } + clrsetbits_le32(&clk->div_peric4, AUDIO_1_RATIO_MASK, + (div & AUDIO_1_RATIO_MASK)); + return 0; +} + +/** + * Linearly searches for the most accurate main and fine stage clock scalars + * (divisors) for a specified target frequency and scalar bit sizes by checking + * all multiples of main_scalar_bits values. Will always return scalars up to or + * slower than target. + * + * @param main_scalar_bits Number of main scalar bits, must be > 0 and < 32 + * @param fine_scalar_bits Number of fine scalar bits, must be > 0 and < 32 + * @param input_freq Clock frequency to be scaled in Hz + * @param target_freq Desired clock frequency in Hz + * @param best_fine_scalar Pointer to store the fine stage divisor + * + * @return best_main_scalar Main scalar for desired frequency or -1 if none + * found + */ +static int clock_calc_best_scalar(unsigned int main_scaler_bits, + unsigned int fine_scalar_bits, unsigned int input_rate, + unsigned int target_rate, unsigned int *best_fine_scalar) +{ + int i; + int best_main_scalar = -1; + unsigned int best_error = target_rate; + const unsigned int cap = (1 << fine_scalar_bits) - 1; + const unsigned int loops = 1 << main_scaler_bits; + + debug("Input Rate is %u, Target is %u, Cap is %u\n", input_rate, + target_rate, cap); + + assert(best_fine_scalar != NULL); + assert(main_scaler_bits <= fine_scalar_bits); + + *best_fine_scalar = 1; + + if (input_rate == 0 || target_rate == 0) + return -1; + + if (target_rate >= input_rate) + return 1; + + for (i = 1; i <= loops; i++) { + const unsigned int effective_div = max(min(input_rate / i / + target_rate, cap), 1); + const unsigned int effective_rate = input_rate / i / + effective_div; + const int error = target_rate - effective_rate; + + debug("%d|effdiv:%u, effrate:%u, error:%d\n", i, effective_div, + effective_rate, error); + + if (error >= 0 && error <= best_error) { + best_error = error; + best_main_scalar = i; + *best_fine_scalar = effective_div; + } + } + + return best_main_scalar; +} + +static int exynos5_set_spi_clk(enum periph_id periph_id, + unsigned int rate) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + int main; + unsigned int fine; + unsigned shift, pre_shift; + unsigned mask = 0xff; + u32 *reg; + + main = clock_calc_best_scalar(4, 8, 400000000, rate, &fine); + if (main < 0) { + debug("%s: Cannot set clock rate for periph %d", + __func__, periph_id); + return -1; + } + main = main - 1; + fine = fine - 1; + + switch (periph_id) { + case PERIPH_ID_SPI0: + reg = &clk->div_peric1; + shift = 0; + pre_shift = 8; + break; + case PERIPH_ID_SPI1: + reg = &clk->div_peric1; + shift = 16; + pre_shift = 24; + break; + case PERIPH_ID_SPI2: + reg = &clk->div_peric2; + shift = 0; + pre_shift = 8; + break; + case PERIPH_ID_SPI3: + reg = &clk->sclk_div_isp; + shift = 0; + pre_shift = 4; + break; + case PERIPH_ID_SPI4: + reg = &clk->sclk_div_isp; + shift = 12; + pre_shift = 16; + break; + default: + debug("%s: Unsupported peripheral ID %d\n", __func__, + periph_id); + return -1; + } + clrsetbits_le32(reg, mask << shift, (main & mask) << shift); + clrsetbits_le32(reg, mask << pre_shift, (fine & mask) << pre_shift); + + return 0; +} + unsigned long get_pll_clk(int pllreg) { if (cpu_is_exynos5()) @@ -803,3 +992,34 @@ void set_mipi_clk(void) if (cpu_is_exynos4()) exynos4_set_mipi_clk(); } + +int set_spi_clk(int periph_id, unsigned int rate) +{ + if (cpu_is_exynos5()) + return exynos5_set_spi_clk(periph_id, rate); + else + return 0; +} + +int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq) +{ + + if (cpu_is_exynos5()) + return exynos5_set_i2s_clk_prescaler(src_frq, dst_frq); + else + return 0; +} + +void set_i2s_clk_source(void) +{ + if (cpu_is_exynos5()) + exynos5_set_i2s_clk_source(); +} + +int set_epll_clk(unsigned long rate) +{ + if (cpu_is_exynos5()) + return exynos5_set_epll_clk(rate); + else + return 0; +} diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c index 7776add9db3..f02f441a8b7 100644 --- a/arch/arm/cpu/armv7/exynos/pinmux.c +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -112,6 +112,7 @@ static int exynos5_mmc_config(int peripheral, int flags) s5p_gpio_set_pull(bank, i, GPIO_PULL_UP); s5p_gpio_set_drv(bank, i, GPIO_DRV_4X); } + return 0; } @@ -230,6 +231,59 @@ static void exynos5_i2c_config(int peripheral, int flags) } } +static void exynos5_i2s_config(int peripheral) +{ + int i; + struct exynos5_gpio_part1 *gpio1 = + (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); + + for (i = 0; i < 5; i++) + s5p_gpio_cfg_pin(&gpio1->b0, i, GPIO_FUNC(0x02)); +} + +void exynos5_spi_config(int peripheral) +{ + int cfg = 0, pin = 0, i; + struct s5p_gpio_bank *bank = NULL; + struct exynos5_gpio_part1 *gpio1 = + (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); + struct exynos5_gpio_part2 *gpio2 = + (struct exynos5_gpio_part2 *) samsung_get_base_gpio_part2(); + + switch (peripheral) { + case PERIPH_ID_SPI0: + bank = &gpio1->a2; + cfg = GPIO_FUNC(0x2); + pin = 0; + break; + case PERIPH_ID_SPI1: + bank = &gpio1->a2; + cfg = GPIO_FUNC(0x2); + pin = 4; + break; + case PERIPH_ID_SPI2: + bank = &gpio1->b1; + cfg = GPIO_FUNC(0x5); + pin = 1; + break; + case PERIPH_ID_SPI3: + bank = &gpio2->f1; + cfg = GPIO_FUNC(0x2); + pin = 0; + break; + case PERIPH_ID_SPI4: + for (i = 0; i < 2; i++) { + s5p_gpio_cfg_pin(&gpio2->f0, i + 2, GPIO_FUNC(0x4)); + s5p_gpio_cfg_pin(&gpio2->e0, i + 4, GPIO_FUNC(0x4)); + } + break; + } + if (peripheral != PERIPH_ID_SPI4) { + for (i = pin; i < pin + 4; i++) + s5p_gpio_cfg_pin(bank, i, cfg); + } +} + static int exynos5_pinmux_config(int peripheral, int flags) { switch (peripheral) { @@ -257,6 +311,72 @@ static int exynos5_pinmux_config(int peripheral, int flags) case PERIPH_ID_I2C7: exynos5_i2c_config(peripheral, flags); break; + case PERIPH_ID_I2S1: + exynos5_i2s_config(peripheral); + break; + case PERIPH_ID_SPI0: + case PERIPH_ID_SPI1: + case PERIPH_ID_SPI2: + case PERIPH_ID_SPI3: + case PERIPH_ID_SPI4: + exynos5_spi_config(peripheral); + break; + default: + debug("%s: invalid peripheral %d", __func__, peripheral); + return -1; + } + + return 0; +} + +static int exynos4_mmc_config(int peripheral, int flags) +{ + struct exynos4_gpio_part2 *gpio2 = + (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2(); + struct s5p_gpio_bank *bank, *bank_ext; + int i; + + switch (peripheral) { + case PERIPH_ID_SDMMC0: + bank = &gpio2->k0; + bank_ext = &gpio2->k1; + break; + case PERIPH_ID_SDMMC2: + bank = &gpio2->k2; + bank_ext = &gpio2->k3; + break; + default: + return -1; + } + for (i = 0; i < 7; i++) { + if (i == 2) + continue; + s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2)); + s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE); + s5p_gpio_set_drv(bank, i, GPIO_DRV_4X); + } + if (flags & PINMUX_FLAG_8BIT_MODE) { + for (i = 3; i < 7; i++) { + s5p_gpio_cfg_pin(bank_ext, i, GPIO_FUNC(0x3)); + s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_NONE); + s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X); + } + } + + return 0; +} + +static int exynos4_pinmux_config(int peripheral, int flags) +{ + switch (peripheral) { + case PERIPH_ID_SDMMC0: + case PERIPH_ID_SDMMC2: + return exynos4_mmc_config(peripheral, flags); + case PERIPH_ID_SDMMC1: + case PERIPH_ID_SDMMC3: + case PERIPH_ID_SDMMC4: + printf("SDMMC device %d not implemented\n", peripheral); + return -1; default: debug("%s: invalid peripheral %d", __func__, peripheral); return -1; @@ -269,6 +389,8 @@ int exynos_pinmux_config(int peripheral, int flags) { if (cpu_is_exynos5()) return exynos5_pinmux_config(peripheral, flags); + else if (cpu_is_exynos4()) + return exynos4_pinmux_config(peripheral, flags); else { debug("pinmux functionality not supported\n"); return -1; diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c index 1c9223fa078..76c2c529a88 100644 --- a/arch/arm/cpu/armv7/mx5/clock.c +++ b/arch/arm/cpu/armv7/mx5/clock.c @@ -928,7 +928,9 @@ int do_mx5_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("IPG %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000); printf("IPG PERCLK %8d kHz\n", mxc_get_clock(MXC_IPG_PERCLK) / 1000); printf("DDR %8d kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000); - +#ifdef CONFIG_MXC_SPI + printf("CSPI %8d kHz\n", mxc_get_clock(MXC_CSPI_CLK) / 1000); +#endif return 0; } diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S index 29ec95797ba..6d9396a9767 100644 --- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S @@ -396,7 +396,7 @@ ENTRY(lowlevel_init) mov r10, lr mov r4, #0 /* Fix R4 to 0 */ -#if defined(CONFIG_MX51) +#if defined(CONFIG_SYS_MAIN_PWR_ON) ldr r0, =GPIO1_BASE_ADDR ldr r1, [r0, #0x0] orr r1, r1, #1 << 23 diff --git a/arch/arm/cpu/armv7/mx6/clock.c b/arch/arm/cpu/armv7/mx6/clock.c index a01d96f48e0..a50db70b19e 100644 --- a/arch/arm/cpu/armv7/mx6/clock.c +++ b/arch/arm/cpu/armv7/mx6/clock.c @@ -404,7 +404,9 @@ int do_mx6_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("\n"); printf("IPG %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000); printf("UART %8d kHz\n", mxc_get_clock(MXC_UART_CLK) / 1000); +#ifdef CONFIG_MXC_SPI printf("CSPI %8d kHz\n", mxc_get_clock(MXC_CSPI_CLK) / 1000); +#endif printf("AHB %8d kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000); printf("AXI %8d kHz\n", mxc_get_clock(MXC_AXI_CLK) / 1000); printf("DDR %8d kHz\n", mxc_get_clock(MXC_DDR_CLK) / 1000); diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index bc65767e7d8..a8aad5dd0a6 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -31,17 +31,33 @@ #include <asm/arch/sys_proto.h> #include <asm/imx-common/boot_mode.h> +struct scu_regs { + u32 ctrl; + u32 config; + u32 status; + u32 invalidate; + u32 fpga_rev; +}; + u32 get_cpu_rev(void) { struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; - int reg = readl(&anatop->digprog); - - /* Read mx6 variant: quad, dual or solo */ - int system_rev = (reg >> 4) & 0xFF000; - /* Read mx6 silicon revision */ - system_rev |= (reg & 0xFF) + 0x10; - - return system_rev; + u32 reg = readl(&anatop->digprog_sololite); + u32 type = ((reg >> 16) & 0xff); + + if (type != MXC_CPU_MX6SL) { + reg = readl(&anatop->digprog); + type = ((reg >> 16) & 0xff); + if (type == MXC_CPU_MX6DL) { + struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR; + u32 cfg = readl(&scu->config) & 3; + + if (!cfg) + type = MXC_CPU_MX6SOLO; + } + } + reg &= 0xff; /* mx6 silicon revision */ + return (type << 12) | (reg + 0x10); } void init_aips(void) diff --git a/arch/arm/cpu/armv7/s5p-common/Makefile b/arch/arm/cpu/armv7/s5p-common/Makefile index f975f3f06c9..17053995bd6 100644 --- a/arch/arm/cpu/armv7/s5p-common/Makefile +++ b/arch/arm/cpu/armv7/s5p-common/Makefile @@ -28,7 +28,6 @@ LIB = $(obj)libs5p-common.o COBJS-y += cpu_info.o COBJS-y += timer.o COBJS-y += sromc.o -COBJS-y += wdt.o COBJS-$(CONFIG_PWM) += pwm.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/arch/arm/cpu/armv7/tegra20/Makefile b/arch/arm/cpu/armv7/tegra20/Makefile index 09a0314d0d9..54ed8c48b40 100644 --- a/arch/arm/cpu/armv7/tegra20/Makefile +++ b/arch/arm/cpu/armv7/tegra20/Makefile @@ -28,6 +28,8 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o COBJS-$(CONFIG_USB_EHCI_TEGRA) += usb.o +COBJS-$(CONFIG_PWM_TEGRA) += pwm.o +COBJS-$(CONFIG_VIDEO_TEGRA) += display.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/arch/arm/cpu/armv7/tegra20/display.c b/arch/arm/cpu/armv7/tegra20/display.c new file mode 100644 index 00000000000..031f9a850a4 --- /dev/null +++ b/arch/arm/cpu/armv7/tegra20/display.c @@ -0,0 +1,409 @@ +/* + * (C) Copyright 2010 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/tegra.h> +#include <asm/arch/display.h> +#include <asm/arch/dc.h> +#include <asm/arch-tegra/clk_rst.h> +#include <asm/arch-tegra/timer.h> + +static struct fdt_disp_config config; + +static void update_window(struct dc_ctlr *dc, struct disp_ctl_win *win) +{ + unsigned h_dda, v_dda; + unsigned long val; + + val = readl(&dc->cmd.disp_win_header); + val |= WINDOW_A_SELECT; + writel(val, &dc->cmd.disp_win_header); + + writel(win->fmt, &dc->win.color_depth); + + clrsetbits_le32(&dc->win.byte_swap, BYTE_SWAP_MASK, + BYTE_SWAP_NOSWAP << BYTE_SWAP_SHIFT); + + val = win->out_x << H_POSITION_SHIFT; + val |= win->out_y << V_POSITION_SHIFT; + writel(val, &dc->win.pos); + + val = win->out_w << H_SIZE_SHIFT; + val |= win->out_h << V_SIZE_SHIFT; + writel(val, &dc->win.size); + + val = (win->w * win->bpp / 8) << H_PRESCALED_SIZE_SHIFT; + val |= win->h << V_PRESCALED_SIZE_SHIFT; + writel(val, &dc->win.prescaled_size); + + writel(0, &dc->win.h_initial_dda); + writel(0, &dc->win.v_initial_dda); + + h_dda = (win->w * 0x1000) / max(win->out_w - 1, 1); + v_dda = (win->h * 0x1000) / max(win->out_h - 1, 1); + + val = h_dda << H_DDA_INC_SHIFT; + val |= v_dda << V_DDA_INC_SHIFT; + writel(val, &dc->win.dda_increment); + + writel(win->stride, &dc->win.line_stride); + writel(0, &dc->win.buf_stride); + + val = WIN_ENABLE; + if (win->bpp < 24) + val |= COLOR_EXPAND; + writel(val, &dc->win.win_opt); + + writel((unsigned long)win->phys_addr, &dc->winbuf.start_addr); + writel(win->x, &dc->winbuf.addr_h_offset); + writel(win->y, &dc->winbuf.addr_v_offset); + + writel(0xff00, &dc->win.blend_nokey); + writel(0xff00, &dc->win.blend_1win); + + val = GENERAL_ACT_REQ | WIN_A_ACT_REQ; + val |= GENERAL_UPDATE | WIN_A_UPDATE; + writel(val, &dc->cmd.state_ctrl); +} + +static void write_pair(struct fdt_disp_config *config, int item, u32 *reg) +{ + writel(config->horiz_timing[item] | + (config->vert_timing[item] << 16), reg); +} + +static int update_display_mode(struct dc_disp_reg *disp, + struct fdt_disp_config *config) +{ + unsigned long val; + unsigned long rate; + unsigned long div; + + writel(0x0, &disp->disp_timing_opt); + write_pair(config, FDT_LCD_TIMING_REF_TO_SYNC, &disp->ref_to_sync); + write_pair(config, FDT_LCD_TIMING_SYNC_WIDTH, &disp->sync_width); + write_pair(config, FDT_LCD_TIMING_BACK_PORCH, &disp->back_porch); + write_pair(config, FDT_LCD_TIMING_FRONT_PORCH, &disp->front_porch); + + writel(config->width | (config->height << 16), &disp->disp_active); + + val = DE_SELECT_ACTIVE << DE_SELECT_SHIFT; + val |= DE_CONTROL_NORMAL << DE_CONTROL_SHIFT; + writel(val, &disp->data_enable_opt); + + val = DATA_FORMAT_DF1P1C << DATA_FORMAT_SHIFT; + val |= DATA_ALIGNMENT_MSB << DATA_ALIGNMENT_SHIFT; + val |= DATA_ORDER_RED_BLUE << DATA_ORDER_SHIFT; + writel(val, &disp->disp_interface_ctrl); + + /* + * The pixel clock divider is in 7.1 format (where the bottom bit + * represents 0.5). Here we calculate the divider needed to get from + * the display clock (typically 600MHz) to the pixel clock. We round + * up or down as requried. + */ + rate = clock_get_periph_rate(PERIPH_ID_DISP1, CLOCK_ID_CGENERAL); + div = ((rate * 2 + config->pixel_clock / 2) / config->pixel_clock) - 2; + debug("Display clock %lu, divider %lu\n", rate, div); + + writel(0x00010001, &disp->shift_clk_opt); + + val = PIXEL_CLK_DIVIDER_PCD1 << PIXEL_CLK_DIVIDER_SHIFT; + val |= div << SHIFT_CLK_DIVIDER_SHIFT; + writel(val, &disp->disp_clk_ctrl); + + return 0; +} + +/* Start up the display and turn on power to PWMs */ +static void basic_init(struct dc_cmd_reg *cmd) +{ + u32 val; + + writel(0x00000100, &cmd->gen_incr_syncpt_ctrl); + writel(0x0000011a, &cmd->cont_syncpt_vsync); + writel(0x00000000, &cmd->int_type); + writel(0x00000000, &cmd->int_polarity); + writel(0x00000000, &cmd->int_mask); + writel(0x00000000, &cmd->int_enb); + + val = PW0_ENABLE | PW1_ENABLE | PW2_ENABLE; + val |= PW3_ENABLE | PW4_ENABLE | PM0_ENABLE; + val |= PM1_ENABLE; + writel(val, &cmd->disp_pow_ctrl); + + val = readl(&cmd->disp_cmd); + val |= CTRL_MODE_C_DISPLAY << CTRL_MODE_SHIFT; + writel(val, &cmd->disp_cmd); +} + +static void basic_init_timer(struct dc_disp_reg *disp) +{ + writel(0x00000020, &disp->mem_high_pri); + writel(0x00000001, &disp->mem_high_pri_timer); +} + +static const u32 rgb_enb_tab[PIN_REG_COUNT] = { + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, +}; + +static const u32 rgb_polarity_tab[PIN_REG_COUNT] = { + 0x00000000, + 0x01000000, + 0x00000000, + 0x00000000, +}; + +static const u32 rgb_data_tab[PIN_REG_COUNT] = { + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, +}; + +static const u32 rgb_sel_tab[PIN_OUTPUT_SEL_COUNT] = { + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00210222, + 0x00002200, + 0x00020000, +}; + +static void rgb_enable(struct dc_com_reg *com) +{ + int i; + + for (i = 0; i < PIN_REG_COUNT; i++) { + writel(rgb_enb_tab[i], &com->pin_output_enb[i]); + writel(rgb_polarity_tab[i], &com->pin_output_polarity[i]); + writel(rgb_data_tab[i], &com->pin_output_data[i]); + } + + for (i = 0; i < PIN_OUTPUT_SEL_COUNT; i++) + writel(rgb_sel_tab[i], &com->pin_output_sel[i]); +} + +int setup_window(struct disp_ctl_win *win, struct fdt_disp_config *config) +{ + win->x = 0; + win->y = 0; + win->w = config->width; + win->h = config->height; + win->out_x = 0; + win->out_y = 0; + win->out_w = config->width; + win->out_h = config->height; + win->phys_addr = config->frame_buffer; + win->stride = config->width * (1 << config->log2_bpp) / 8; + debug("%s: depth = %d\n", __func__, config->log2_bpp); + switch (config->log2_bpp) { + case 5: + case 24: + win->fmt = COLOR_DEPTH_R8G8B8A8; + win->bpp = 32; + break; + case 4: + win->fmt = COLOR_DEPTH_B5G6R5; + win->bpp = 16; + break; + + default: + debug("Unsupported LCD bit depth"); + return -1; + } + + return 0; +} + +struct fdt_disp_config *tegra_display_get_config(void) +{ + return config.valid ? &config : NULL; +} + +static void debug_timing(const char *name, unsigned int timing[]) +{ +#ifdef DEBUG + int i; + + debug("%s timing: ", name); + for (i = 0; i < FDT_LCD_TIMING_COUNT; i++) + debug("%d ", timing[i]); + debug("\n"); +#endif +} + +/** + * Decode panel information from the fdt, according to a standard binding + * + * @param blob fdt blob + * @param node offset of fdt node to read from + * @param config structure to store fdt config into + * @return 0 if ok, -ve on error + */ +static int tegra_decode_panel(const void *blob, int node, + struct fdt_disp_config *config) +{ + int front, back, ref; + + config->width = fdtdec_get_int(blob, node, "xres", -1); + config->height = fdtdec_get_int(blob, node, "yres", -1); + config->pixel_clock = fdtdec_get_int(blob, node, "clock", 0); + if (!config->pixel_clock || config->width == -1 || + config->height == -1) { + debug("%s: Pixel parameters missing\n", __func__); + return -FDT_ERR_NOTFOUND; + } + + back = fdtdec_get_int(blob, node, "left-margin", -1); + front = fdtdec_get_int(blob, node, "right-margin", -1); + ref = fdtdec_get_int(blob, node, "hsync-len", -1); + if ((back | front | ref) == -1) { + debug("%s: Horizontal parameters missing\n", __func__); + return -FDT_ERR_NOTFOUND; + } + + /* Use a ref-to-sync of 1 always, and take this from the front porch */ + config->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1; + config->horiz_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref; + config->horiz_timing[FDT_LCD_TIMING_BACK_PORCH] = back; + config->horiz_timing[FDT_LCD_TIMING_FRONT_PORCH] = front - + config->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC]; + debug_timing("horiz", config->horiz_timing); + + back = fdtdec_get_int(blob, node, "upper-margin", -1); + front = fdtdec_get_int(blob, node, "lower-margin", -1); + ref = fdtdec_get_int(blob, node, "vsync-len", -1); + if ((back | front | ref) == -1) { + debug("%s: Vertical parameters missing\n", __func__); + return -FDT_ERR_NOTFOUND; + } + + config->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1; + config->vert_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref; + config->vert_timing[FDT_LCD_TIMING_BACK_PORCH] = back; + config->vert_timing[FDT_LCD_TIMING_FRONT_PORCH] = front - + config->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC]; + debug_timing("vert", config->vert_timing); + + return 0; +} + +/** + * Decode the display controller information from the fdt. + * + * @param blob fdt blob + * @param config structure to store fdt config into + * @return 0 if ok, -ve on error + */ +static int tegra_display_decode_config(const void *blob, + struct fdt_disp_config *config) +{ + int node, rgb; + int bpp, bit; + + /* TODO: Support multiple controllers */ + node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA20_DC); + if (node < 0) { + debug("%s: Cannot find display controller node in fdt\n", + __func__); + return node; + } + config->disp = (struct disp_ctlr *)fdtdec_get_addr(blob, node, "reg"); + if (!config->disp) { + debug("%s: No display controller address\n", __func__); + return -1; + } + + rgb = fdt_subnode_offset(blob, node, "rgb"); + + config->panel_node = fdtdec_lookup_phandle(blob, rgb, "nvidia,panel"); + if (!config->panel_node < 0) { + debug("%s: Cannot find panel information\n", __func__); + return -1; + } + + if (tegra_decode_panel(blob, config->panel_node, config)) { + debug("%s: Failed to decode panel information\n", __func__); + return -1; + } + + bpp = fdtdec_get_int(blob, config->panel_node, "nvidia,bits-per-pixel", + -1); + bit = ffs(bpp) - 1; + if (bpp == (1 << bit)) + config->log2_bpp = bit; + else + config->log2_bpp = bpp; + if (bpp == -1) { + debug("%s: Pixel bpp parameters missing\n", __func__); + return -FDT_ERR_NOTFOUND; + } + config->bpp = bpp; + + config->valid = 1; /* we have a valid configuration */ + + return 0; +} + +int tegra_display_probe(const void *blob, void *default_lcd_base) +{ + struct disp_ctl_win window; + struct dc_ctlr *dc; + + if (tegra_display_decode_config(blob, &config)) + return -1; + + config.frame_buffer = (u32)default_lcd_base; + + dc = (struct dc_ctlr *)config.disp; + + /* + * A header file for clock constants was NAKed upstream. + * TODO: Put this into the FDT and fdt_lcd struct when we have clock + * support there + */ + clock_start_periph_pll(PERIPH_ID_HOST1X, CLOCK_ID_PERIPH, + 144 * 1000000); + clock_start_periph_pll(PERIPH_ID_DISP1, CLOCK_ID_CGENERAL, + 600 * 1000000); + basic_init(&dc->cmd); + basic_init_timer(&dc->disp); + rgb_enable(&dc->com); + + if (config.pixel_clock) + update_display_mode(&dc->disp, &config); + + if (setup_window(&window, &config)) + return -1; + + update_window(dc, &window); + + return 0; +} diff --git a/arch/arm/cpu/armv7/tegra20/pwm.c b/arch/arm/cpu/armv7/tegra20/pwm.c new file mode 100644 index 00000000000..b655c5cd06f --- /dev/null +++ b/arch/arm/cpu/armv7/tegra20/pwm.c @@ -0,0 +1,101 @@ +/* + * Tegra2 pulse width frequency modulator definitions + * + * Copyright (c) 2011 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <fdtdec.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/pwm.h> + +struct pwm_info { + struct pwm_ctlr *pwm; /* Registers for our pwm controller */ + int pwm_node; /* PWM device tree node */ +} local; + +void pwm_enable(unsigned channel, int rate, int pulse_width, int freq_divider) +{ + u32 reg; + + assert(channel < PWM_NUM_CHANNELS); + + /* TODO: Can we use clock_adjust_periph_pll_div() here? */ + clock_start_periph_pll(PERIPH_ID_PWM, CLOCK_ID_SFROM32KHZ, rate); + + reg = PWM_ENABLE_MASK; + reg |= pulse_width << PWM_WIDTH_SHIFT; + reg |= freq_divider << PWM_DIVIDER_SHIFT; + writel(reg, &local.pwm[channel].control); + debug("%s: channel=%d, rate=%d\n", __func__, channel, rate); +} + +int pwm_request(const void *blob, int node, const char *prop_name) +{ + int pwm_node; + u32 data[3]; + + if (fdtdec_get_int_array(blob, node, prop_name, data, + ARRAY_SIZE(data))) { + debug("%s: Cannot decode PWM property '%s'\n", __func__, + prop_name); + return -1; + } + + pwm_node = fdt_node_offset_by_phandle(blob, data[0]); + if (pwm_node != local.pwm_node) { + debug("%s: PWM property '%s' phandle %d not recognised" + "- expecting %d\n", __func__, prop_name, data[0], + local.pwm_node); + return -1; + } + if (data[1] >= PWM_NUM_CHANNELS) { + debug("%s: PWM property '%s': invalid channel %u\n", __func__, + prop_name, data[1]); + return -1; + } + + /* + * TODO: We could maintain a list of requests, but it might not be + * worth it for U-Boot. + */ + return data[1]; +} + +int pwm_init(const void *blob) +{ + local.pwm_node = fdtdec_next_compatible(blob, 0, + COMPAT_NVIDIA_TEGRA20_PWM); + if (local.pwm_node < 0) { + debug("%s: Cannot find device tree node\n", __func__); + return -1; + } + + local.pwm = (struct pwm_ctlr *)fdtdec_get_addr(blob, local.pwm_node, + "reg"); + if (local.pwm == (struct pwm_ctlr *)FDT_ADDR_T_NONE) { + debug("%s: Cannot find pwm reg address\n", __func__); + return -1; + } + debug("Tegra PWM at %p, node %d\n", local.pwm, local.pwm_node); + + return 0; +} diff --git a/arch/arm/cpu/tegra20-common/funcmux.c b/arch/arm/cpu/tegra20-common/funcmux.c index 00b8029ebad..ece7ad9ec95 100644 --- a/arch/arm/cpu/tegra20-common/funcmux.c +++ b/arch/arm/cpu/tegra20-common/funcmux.c @@ -25,6 +25,30 @@ #include <asm/arch/funcmux.h> #include <asm/arch/pinmux.h> +/* + * The PINMUX macro is used to set up pinmux tables. + */ +#define PINMUX(grp, mux, pupd, tri) \ + {PINGRP_##grp, PMUX_FUNC_##mux, PMUX_PULL_##pupd, PMUX_TRI_##tri} + +static const struct pingroup_config disp1_default[] = { + PINMUX(LDI, DISPA, NORMAL, NORMAL), + PINMUX(LHP0, DISPA, NORMAL, NORMAL), + PINMUX(LHP1, DISPA, NORMAL, NORMAL), + PINMUX(LHP2, DISPA, NORMAL, NORMAL), + PINMUX(LHS, DISPA, NORMAL, NORMAL), + PINMUX(LM0, RSVD4, NORMAL, NORMAL), + PINMUX(LPP, DISPA, NORMAL, NORMAL), + PINMUX(LPW0, DISPA, NORMAL, NORMAL), + PINMUX(LPW2, DISPA, NORMAL, NORMAL), + PINMUX(LSC0, DISPA, NORMAL, NORMAL), + PINMUX(LSPI, DISPA, NORMAL, NORMAL), + PINMUX(LVP1, DISPA, NORMAL, NORMAL), + PINMUX(LVS, DISPA, NORMAL, NORMAL), + PINMUX(SLXD, SPDIF, NORMAL, NORMAL), +}; + + int funcmux_select(enum periph_id id, int config) { int bad_config = config != FUNCMUX_DEFAULT; @@ -257,6 +281,19 @@ int funcmux_select(enum periph_id id, int config) break; } break; + case PERIPH_ID_DISP1: + if (config == FUNCMUX_DEFAULT) { + int i; + + for (i = PINGRP_LD0; i <= PINGRP_LD17; i++) { + pinmux_set_func(i, PMUX_FUNC_DISPA); + pinmux_tristate_disable(i); + pinmux_set_pullupdown(i, PMUX_PULL_NORMAL); + } + pinmux_config_table(disp1_default, + ARRAY_SIZE(disp1_default)); + } + break; default: debug("%s: invalid periph_id %d", __func__, id); diff --git a/arch/arm/cpu/tegra20-common/pinmux.c b/arch/arm/cpu/tegra20-common/pinmux.c index 08b83055dbb..a2a09169e54 100644 --- a/arch/arm/cpu/tegra20-common/pinmux.c +++ b/arch/arm/cpu/tegra20-common/pinmux.c @@ -554,7 +554,7 @@ void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func) writel(reg, muxctl); } -void pinmux_config_pingroup(struct pingroup_config *config) +void pinmux_config_pingroup(const struct pingroup_config *config) { enum pmux_pingrp pin = config->pingroup; @@ -563,7 +563,7 @@ void pinmux_config_pingroup(struct pingroup_config *config) pinmux_set_tristate(pin, config->tristate); } -void pinmux_config_table(struct pingroup_config *config, int len) +void pinmux_config_table(const struct pingroup_config *config, int len) { int i; diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi index d936b1e7e6a..636ec2c1fe7 100644 --- a/arch/arm/dts/tegra20.dtsi +++ b/arch/arm/dts/tegra20.dtsi @@ -211,4 +211,109 @@ compatible = "nvidia,tegra20-nand"; reg = <0x70008000 0x100>; }; + + pwm: pwm@7000a000 { + compatible = "nvidia,tegra20-pwm"; + reg = <0x7000a000 0x100>; + #pwm-cells = <2>; + }; + + host1x { + compatible = "nvidia,tegra20-host1x", "simple-bus"; + reg = <0x50000000 0x00024000>; + interrupts = <0 65 0x04 /* mpcore syncpt */ + 0 67 0x04>; /* mpcore general */ + status = "disabled"; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x54000000 0x54000000 0x04000000>; + + /* video-encoding/decoding */ + mpe { + reg = <0x54040000 0x00040000>; + interrupts = <0 68 0x04>; + status = "disabled"; + }; + + /* video input */ + vi { + reg = <0x54080000 0x00040000>; + interrupts = <0 69 0x04>; + status = "disabled"; + }; + + /* EPP */ + epp { + reg = <0x540c0000 0x00040000>; + interrupts = <0 70 0x04>; + status = "disabled"; + }; + + /* ISP */ + isp { + reg = <0x54100000 0x00040000>; + interrupts = <0 71 0x04>; + status = "disabled"; + }; + + /* 2D engine */ + gr2d { + reg = <0x54140000 0x00040000>; + interrupts = <0 72 0x04>; + status = "disabled"; + }; + + /* 3D engine */ + gr3d { + reg = <0x54180000 0x00040000>; + status = "disabled"; + }; + + /* display controllers */ + dc@54200000 { + compatible = "nvidia,tegra20-dc"; + reg = <0x54200000 0x00040000>; + interrupts = <0 73 0x04>; + status = "disabled"; + + rgb { + status = "disabled"; + }; + }; + + dc@54240000 { + compatible = "nvidia,tegra20-dc"; + reg = <0x54240000 0x00040000>; + interrupts = <0 74 0x04>; + status = "disabled"; + + rgb { + status = "disabled"; + }; + }; + + /* outputs */ + hdmi { + compatible = "nvidia,tegra20-hdmi"; + reg = <0x54280000 0x00040000>; + interrupts = <0 75 0x04>; + status = "disabled"; + }; + + tvo { + compatible = "nvidia,tegra20-tvo"; + reg = <0x542c0000 0x00040000>; + interrupts = <0 76 0x04>; + status = "disabled"; + }; + + dsi { + compatible = "nvidia,tegra20-dsi"; + reg = <0x54300000 0x00040000>; + status = "disabled"; + }; + }; + }; diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c index a10d12d97dc..50819085550 100644 --- a/arch/arm/imx-common/cpu.c +++ b/arch/arm/imx-common/cpu.c @@ -65,20 +65,72 @@ char *get_reset_cause(void) } } +#if defined(CONFIG_MX53) || defined(CONFIG_MX6) +#if defined(CONFIG_MX53) +#define MEMCTL_BASE ESDCTL_BASE_ADDR; +#else +#define MEMCTL_BASE MMDC_P0_BASE_ADDR; +#endif +static const unsigned char col_lookup[] = {9, 10, 11, 8, 12, 9, 9, 9}; +static const unsigned char bank_lookup[] = {3, 2}; + +struct esd_mmdc_regs { + uint32_t ctl; + uint32_t pdc; + uint32_t otc; + uint32_t cfg0; + uint32_t cfg1; + uint32_t cfg2; + uint32_t misc; + uint32_t scr; + uint32_t ref; + uint32_t rsvd1; + uint32_t rsvd2; + uint32_t rwd; + uint32_t or; + uint32_t mrr; + uint32_t cfg3lp; + uint32_t mr4; +}; + +#define ESD_MMDC_CTL_GET_ROW(mdctl) ((ctl >> 24) & 7) +#define ESD_MMDC_CTL_GET_COLUMN(mdctl) ((ctl >> 20) & 7) +#define ESD_MMDC_CTL_GET_WIDTH(mdctl) ((ctl >> 16) & 3) +#define ESD_MMDC_CTL_GET_CS1(mdctl) ((ctl >> 30) & 1) +#define ESD_MMDC_MISC_GET_BANK(mdmisc) ((misc >> 5) & 1) + +unsigned imx_ddr_size(void) +{ + struct esd_mmdc_regs *mem = (struct esd_mmdc_regs *)MEMCTL_BASE; + unsigned ctl = readl(&mem->ctl); + unsigned misc = readl(&mem->misc); + int bits = 11 + 0 + 0 + 1; /* row + col + bank + width */ + + bits += ESD_MMDC_CTL_GET_ROW(ctl); + bits += col_lookup[ESD_MMDC_CTL_GET_COLUMN(ctl)]; + bits += bank_lookup[ESD_MMDC_MISC_GET_BANK(misc)]; + bits += ESD_MMDC_CTL_GET_WIDTH(ctl); + bits += ESD_MMDC_CTL_GET_CS1(ctl); + return 1 << bits; +} +#endif + #if defined(CONFIG_DISPLAY_CPUINFO) -static const char *get_imx_type(u32 imxtype) +const char *get_imx_type(u32 imxtype) { switch (imxtype) { - case 0x63: + case MXC_CPU_MX6Q: return "6Q"; /* Quad-core version of the mx6 */ - case 0x61: - return "6DS"; /* Dual/Solo version of the mx6 */ - case 0x60: + case MXC_CPU_MX6DL: + return "6DL"; /* Dual Lite version of the mx6 */ + case MXC_CPU_MX6SOLO: + return "6SOLO"; /* Solo version of the mx6 */ + case MXC_CPU_MX6SL: return "6SL"; /* Solo-Lite version of the mx6 */ - case 0x51: + case MXC_CPU_MX51: return "51"; - case 0x53: + case MXC_CPU_MX53: return "53"; default: return "??"; diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h index 552902573ff..cd12323509a 100644 --- a/arch/arm/include/asm/arch-exynos/clk.h +++ b/arch/arm/include/asm/arch-exynos/clk.h @@ -38,5 +38,9 @@ void set_mmc_clk(int dev_index, unsigned int div); unsigned long get_lcd_clk(void); void set_lcd_clk(void); void set_mipi_clk(void); +void set_i2s_clk_source(void); +int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq); +int set_epll_clk(unsigned long rate); +int set_spi_clk(int periph_id, unsigned int rate); #endif diff --git a/arch/arm/include/asm/arch-exynos/clock.h b/arch/arm/include/asm/arch-exynos/clock.h index fce38efbb25..ff6781aae45 100644 --- a/arch/arm/include/asm/arch-exynos/clock.h +++ b/arch/arm/include/asm/arch-exynos/clock.h @@ -595,9 +595,38 @@ struct exynos5_clock { unsigned int pll_div2_sel; unsigned char res123[0xf5d8]; }; + +/* structure for epll configuration used in audio clock configuration */ +struct set_epll_con_val { + unsigned int freq_out; /* frequency out */ + unsigned int en_lock_det; /* enable lock detect */ + unsigned int m_div; /* m divider value */ + unsigned int p_div; /* p divider value */ + unsigned int s_div; /* s divider value */ + unsigned int k_dsm; /* k value of delta signal modulator */ +}; #endif #define MPLL_FOUT_SEL_SHIFT 4 +#define EXYNOS5_EPLLCON0_LOCKED_SHIFT 29 /* EPLL Locked bit position*/ +#define TIMEOUT_EPLL_LOCK 1000 + +#define AUDIO_0_RATIO_MASK 0x0f +#define AUDIO_1_RATIO_MASK 0x0f + +#define AUDIO1_SEL_MASK 0xf +#define CLK_SRC_SCLK_EPLL 0x7 + +/* CON0 bit-fields */ +#define EPLL_CON0_MDIV_MASK 0x1ff +#define EPLL_CON0_PDIV_MASK 0x3f +#define EPLL_CON0_SDIV_MASK 0x7 +#define EPLL_CON0_MDIV_SHIFT 16 +#define EPLL_CON0_PDIV_SHIFT 8 +#define EPLL_CON0_SDIV_SHIFT 0 +#define EPLL_CON0_LOCK_DET_EN_SHIFT 28 +#define EPLL_CON0_LOCK_DET_EN_MASK 1 + #define MPLL_FOUT_SEL_MASK 0x1 #define BPLL_FOUT_SEL_SHIFT 0 #define BPLL_FOUT_SEL_MASK 0x1 diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h index 2cd4ae15262..d1b2ea8023d 100644 --- a/arch/arm/include/asm/arch-exynos/cpu.h +++ b/arch/arm/include/asm/arch-exynos/cpu.h @@ -51,12 +51,15 @@ #define EXYNOS4_UART_BASE 0x13800000 #define EXYNOS4_I2C_BASE 0x13860000 #define EXYNOS4_ADC_BASE 0x13910000 +#define EXYNOS4_SPI_BASE 0x13920000 #define EXYNOS4_PWMTIMER_BASE 0x139D0000 #define EXYNOS4_MODEM_BASE 0x13A00000 #define EXYNOS4_USBPHY_CONTROL 0x10020704 +#define EXYNOS4_I2S_BASE 0xE2100000 #define EXYNOS4_GPIO_PART4_BASE DEVICE_NOT_AVAILABLE #define EXYNOS4_DP_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4_SPI_ISP_BASE DEVICE_NOT_AVAILABLE /* EXYNOS5 */ #define EXYNOS5_I2C_SPACING 0x10000 @@ -81,7 +84,10 @@ #define EXYNOS5_SROMC_BASE 0x12250000 #define EXYNOS5_UART_BASE 0x12C00000 #define EXYNOS5_I2C_BASE 0x12C60000 +#define EXYNOS5_SPI_BASE 0x12D20000 +#define EXYNOS5_I2S_BASE 0x12D60000 #define EXYNOS5_PWMTIMER_BASE 0x12DD0000 +#define EXYNOS5_SPI_ISP_BASE 0x131A0000 #define EXYNOS5_GPIO_PART2_BASE 0x13400000 #define EXYNOS5_FIMD_BASE 0x14400000 #define EXYNOS5_DP_BASE 0x145B0000 @@ -139,6 +145,15 @@ static inline int cpu_is_##type(void) \ IS_SAMSUNG_TYPE(exynos4, 0x4) IS_SAMSUNG_TYPE(exynos5, 0x5) +#define IS_EXYNOS_TYPE(type, id) \ +static inline int proid_is_##type(void) \ +{ \ + return s5p_cpu_id == id; \ +} + +IS_EXYNOS_TYPE(exynos4210, 0x4210) +IS_EXYNOS_TYPE(exynos5250, 0x5250) + #define SAMSUNG_BASE(device, base) \ static inline unsigned int samsung_get_base_##device(void) \ { \ @@ -156,6 +171,7 @@ SAMSUNG_BASE(dp, DP_BASE) SAMSUNG_BASE(sysreg, SYSREG_BASE) SAMSUNG_BASE(fimd, FIMD_BASE) SAMSUNG_BASE(i2c, I2C_BASE) +SAMSUNG_BASE(i2s, I2S_BASE) SAMSUNG_BASE(mipi_dsim, MIPI_DSIM_BASE) SAMSUNG_BASE(gpio_part1, GPIO_PART1_BASE) SAMSUNG_BASE(gpio_part2, GPIO_PART2_BASE) @@ -173,6 +189,8 @@ SAMSUNG_BASE(usb_ehci, USB_HOST_EHCI_BASE) SAMSUNG_BASE(usb_otg, USBOTG_BASE) SAMSUNG_BASE(watchdog, WATCHDOG_BASE) SAMSUNG_BASE(power, POWER_BASE) +SAMSUNG_BASE(spi, SPI_BASE) +SAMSUNG_BASE(spi_isp, SPI_ISP_BASE) #endif #endif /* _EXYNOS4_CPU_H */ diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h index 97be4eac052..4db8fd640e0 100644 --- a/arch/arm/include/asm/arch-exynos/gpio.h +++ b/arch/arm/include/asm/arch-exynos/gpio.h @@ -207,6 +207,25 @@ static inline unsigned int s5p_gpio_base(int nr) return 0; } +static inline unsigned int s5p_gpio_part_max(int nr) +{ + if (cpu_is_exynos5()) { + if (nr < EXYNOS5_GPIO_PART1_MAX) + return 0; + else if (nr < EXYNOS5_GPIO_PART2_MAX) + return EXYNOS5_GPIO_PART1_MAX; + else + return EXYNOS5_GPIO_PART2_MAX; + + } else if (cpu_is_exynos4()) { + if (nr < EXYNOS4_GPIO_PART1_MAX) + return 0; + else + return EXYNOS4_GPIO_PART1_MAX; + } + + return 0; +} #endif /* Pin configurations */ diff --git a/arch/arm/include/asm/arch-exynos/i2s-regs.h b/arch/arm/include/asm/arch-exynos/i2s-regs.h new file mode 100644 index 00000000000..2326ca03648 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/i2s-regs.h @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * R. Chandrasekar <rcsekar@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __I2S_REGS_H__ +#define __I2S_REGS_H__ + +#define CON_TXFIFO_FULL (1 << 8) +#define CON_TXCH_PAUSE (1 << 4) +#define CON_ACTIVE (1 << 0) + +#define MOD_BLCP_SHIFT 24 +#define MOD_BLCP_16BIT (0 << MOD_BLCP_SHIFT) +#define MOD_BLCP_8BIT (1 << MOD_BLCP_SHIFT) +#define MOD_BLCP_24BIT (2 << MOD_BLCP_SHIFT) +#define MOD_BLCP_MASK (3 << MOD_BLCP_SHIFT) + +#define MOD_BLC_16BIT (0 << 13) +#define MOD_BLC_8BIT (1 << 13) +#define MOD_BLC_24BIT (2 << 13) +#define MOD_BLC_MASK (3 << 13) + +#define MOD_SLAVE (1 << 11) +#define MOD_MASK (3 << 8) +#define MOD_LR_LLOW (0 << 7) +#define MOD_LR_RLOW (1 << 7) +#define MOD_SDF_IIS (0 << 5) +#define MOD_SDF_MSB (1 << 5) +#define MOD_SDF_LSB (2 << 5) +#define MOD_SDF_MASK (3 << 5) +#define MOD_RCLK_256FS (0 << 3) +#define MOD_RCLK_512FS (1 << 3) +#define MOD_RCLK_384FS (2 << 3) +#define MOD_RCLK_768FS (3 << 3) +#define MOD_RCLK_MASK (3 << 3) +#define MOD_BCLK_32FS (0 << 1) +#define MOD_BCLK_48FS (1 << 1) +#define MOD_BCLK_16FS (2 << 1) +#define MOD_BCLK_24FS (3 << 1) +#define MOD_BCLK_MASK (3 << 1) + +#define MOD_CDCLKCON (1 << 12) + +#define FIC_TXFLUSH (1 << 15) +#define FIC_RXFLUSH (1 << 7) + +#endif /* __I2S_REGS_H__ */ diff --git a/arch/arm/include/asm/arch-exynos/periph.h b/arch/arm/include/asm/arch-exynos/periph.h index b861d7d5842..13abd2d703a 100644 --- a/arch/arm/include/asm/arch-exynos/periph.h +++ b/arch/arm/include/asm/arch-exynos/periph.h @@ -38,11 +38,18 @@ enum periph_id { PERIPH_ID_I2C5, PERIPH_ID_I2C6, PERIPH_ID_I2C7, + PERIPH_ID_I2S1, PERIPH_ID_SDMMC0, PERIPH_ID_SDMMC1, PERIPH_ID_SDMMC2, PERIPH_ID_SDMMC3, + PERIPH_ID_SDMMC4, PERIPH_ID_SROMC, + PERIPH_ID_SPI0, + PERIPH_ID_SPI1, + PERIPH_ID_SPI2, + PERIPH_ID_SPI3, + PERIPH_ID_SPI4, PERIPH_ID_UART0, PERIPH_ID_UART1, PERIPH_ID_UART2, diff --git a/arch/arm/include/asm/arch-exynos/sound.h b/arch/arm/include/asm/arch-exynos/sound.h new file mode 100644 index 00000000000..d1bd2f69666 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/sound.h @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * Rajeshwari Shinde <rajeshwari.s@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#ifndef __SOUND_ARCH_H__ +#define __SOUND_ARCH_H__ + +/* I2S values */ +#define I2S_PLL_CLK 192000000 +#define I2S_SAMPLING_RATE 48000 +#define I2S_BITS_PER_SAMPLE 16 +#define I2S_CHANNELS 2 +#define I2S_RFS 256 +#define I2S_BFS 32 + +/* I2C values */ +#define AUDIO_I2C_BUS 1 +#define AUDIO_I2C_REG 0x1a + +/* Audio Codec */ +#define AUDIO_CODEC "wm8994" + +#define AUDIO_COMPAT 1 +#endif diff --git a/arch/arm/include/asm/arch-exynos/spi.h b/arch/arm/include/asm/arch-exynos/spi.h new file mode 100644 index 00000000000..7cab1e99170 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/spi.h @@ -0,0 +1,78 @@ +/* + * (C) Copyright 2012 SAMSUNG Electronics + * Padmavathi Venna <padma.v@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_EXYNOS_COMMON_SPI_H_ +#define __ASM_ARCH_EXYNOS_COMMON_SPI_H_ + +#ifndef __ASSEMBLY__ + +/* SPI peripheral register map; padded to 64KB */ +struct exynos_spi { + unsigned int ch_cfg; /* 0x00 */ + unsigned char reserved0[4]; + unsigned int mode_cfg; /* 0x08 */ + unsigned int cs_reg; /* 0x0c */ + unsigned char reserved1[4]; + unsigned int spi_sts; /* 0x14 */ + unsigned int tx_data; /* 0x18 */ + unsigned int rx_data; /* 0x1c */ + unsigned int pkt_cnt; /* 0x20 */ + unsigned char reserved2[4]; + unsigned char reserved3[4]; + unsigned int fb_clk; /* 0x2c */ + unsigned char padding[0xffd0]; +}; + +#define EXYNOS_SPI_MAX_FREQ 50000000 + +#define SPI_TIMEOUT_MS 10 + +/* SPI_CHCFG */ +#define SPI_CH_HS_EN (1 << 6) +#define SPI_CH_RST (1 << 5) +#define SPI_SLAVE_MODE (1 << 4) +#define SPI_CH_CPOL_L (1 << 3) +#define SPI_CH_CPHA_B (1 << 2) +#define SPI_RX_CH_ON (1 << 1) +#define SPI_TX_CH_ON (1 << 0) + +/* SPI_MODECFG */ +#define SPI_MODE_CH_WIDTH_WORD (0x2 << 29) +#define SPI_MODE_BUS_WIDTH_WORD (0x2 << 17) + +/* SPI_CSREG */ +#define SPI_SLAVE_SIG_INACT (1 << 0) + +/* SPI_STS */ +#define SPI_ST_TX_DONE (1 << 25) +#define SPI_FIFO_LVL_MASK 0x1ff +#define SPI_TX_LVL_OFFSET 6 +#define SPI_RX_LVL_OFFSET 15 + +/* Feedback Delay */ +#define SPI_CLK_BYPASS (0 << 0) +#define SPI_FB_DELAY_90 (1 << 0) +#define SPI_FB_DELAY_180 (2 << 0) +#define SPI_FB_DELAY_270 (3 << 0) + +/* Packet Count */ +#define SPI_PACKET_CNT_EN (1 << 16) + +#endif /* __ASSEMBLY__ */ +#endif diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h index 53aafe3075f..5f4b5438234 100644 --- a/arch/arm/include/asm/arch-mx25/imx-regs.h +++ b/arch/arm/include/asm/arch-mx25/imx-regs.h @@ -36,10 +36,6 @@ #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) #include <asm/types.h> -#ifdef CONFIG_FEC_MXC -extern void mx25_fec_init_pins(void); -#endif - /* Clock Control Module (CCM) registers */ struct ccm_regs { u32 mpctl; /* Core PLL Control */ @@ -245,6 +241,7 @@ struct aips_regs { #define IMX_RTIC_BASE (0x53FEC000) #define IMX_IIM_BASE (0x53FF0000) #define IMX_USB_BASE (0x53FF4000) +#define IMX_USB_PORT_OFFSET 0x200 #define IMX_CSI_BASE (0x53FF8000) #define IMX_DRYICE_BASE (0x53FFC000) diff --git a/arch/arm/include/asm/arch-mx25/sys_proto.h b/arch/arm/include/asm/arch-mx25/sys_proto.h index 6a01a7b04c8..46db341e8a3 100644 --- a/arch/arm/include/asm/arch-mx25/sys_proto.h +++ b/arch/arm/include/asm/arch-mx25/sys_proto.h @@ -25,5 +25,8 @@ #define _SYS_PROTO_H_ void mx25_uart1_init_pins(void); +#if defined CONFIG_FEC_MXC +extern void mx25_fec_init_pins(void); +#endif #endif diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h index 8fd3d08069b..ae3658b6393 100644 --- a/arch/arm/include/asm/arch-mx31/imx-regs.h +++ b/arch/arm/include/asm/arch-mx31/imx-regs.h @@ -895,32 +895,7 @@ struct esdc_regs { #define MX31_AIPS1_BASE_ADDR 0x43f00000 #define IMX_USB_BASE (MX31_AIPS1_BASE_ADDR + 0x88000) - -/* USB portsc */ -/* values for portsc field */ -#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23) -#define MXC_EHCI_FORCE_FS (1 << 24) -#define MXC_EHCI_UTMI_8BIT (0 << 28) -#define MXC_EHCI_UTMI_16BIT (1 << 28) -#define MXC_EHCI_SERIAL (1 << 29) -#define MXC_EHCI_MODE_UTMI (0 << 30) -#define MXC_EHCI_MODE_PHILIPS (1 << 30) -#define MXC_EHCI_MODE_ULPI (2 << 30) -#define MXC_EHCI_MODE_SERIAL (3 << 30) - -/* values for flags field */ -#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0) -#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0) -#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0) -#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0) -#define MXC_EHCI_INTERFACE_MASK (0xf) - -#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5) -#define MXC_EHCI_TTL_ENABLED (1 << 6) - -#define MXC_EHCI_INTERNAL_PHY (1 << 7) -#define MXC_EHCI_IPPUE_DOWN (1 << 8) -#define MXC_EHCI_IPPUE_UP (1 << 9) +#define IMX_USB_PORT_OFFSET 0x200 /* * CSPI register definitions diff --git a/arch/arm/include/asm/arch-mx35/imx-regs.h b/arch/arm/include/asm/arch-mx35/imx-regs.h index 7b098094fe6..18c6816e489 100644 --- a/arch/arm/include/asm/arch-mx35/imx-regs.h +++ b/arch/arm/include/asm/arch-mx35/imx-regs.h @@ -33,6 +33,8 @@ #define IRAM_BASE_ADDR 0x10000000 /* internal ram */ #define IRAM_SIZE 0x00020000 /* 128 KB */ +#define LOW_LEVEL_SRAM_STACK 0x1001E000 + /* * AIPS 1 */ @@ -82,6 +84,8 @@ #define PWM_BASE_ADDR 0x53FE0000 #define RTIC_BASE_ADDR 0x53FEC000 #define IIM_BASE_ADDR 0x53FF0000 +#define IMX_USB_BASE 0x53FF4000 +#define IMX_USB_PORT_OFFSET 0x400 #define IMX_CCM_BASE CCM_BASE_ADDR diff --git a/arch/arm/include/asm/arch-mx35/mmc_host_def.h b/arch/arm/include/asm/arch-mx35/mmc_host_def.h new file mode 100644 index 00000000000..775b9552cad --- /dev/null +++ b/arch/arm/include/asm/arch-mx35/mmc_host_def.h @@ -0,0 +1,31 @@ +/* + * (C) Copyright 2008 + * Texas Instruments, <www.ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation's version 2 of + * the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef MMC_HOST_DEF_H +#define MMC_HOST_DEF_H + +/* Driver definitions */ +#define MMCSD_SECTOR_SIZE 512 + +#endif /* MMC_HOST_DEF_H */ diff --git a/arch/arm/include/asm/arch-mx35/spl.h b/arch/arm/include/asm/arch-mx35/spl.h new file mode 100644 index 00000000000..91d11ae847c --- /dev/null +++ b/arch/arm/include/asm/arch-mx35/spl.h @@ -0,0 +1,38 @@ +/* + * (C) Copyright 2012 + * Texas Instruments, <www.ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _ASM_ARCH_SPL_H_ +#define _ASM_SPL_H_ + +#define BOOT_DEVICE_NONE 0 +#define BOOT_DEVICE_XIP 1 +#define BOOT_DEVICE_XIPWAIT 2 +#define BOOT_DEVICE_NAND 3 +#define BOOT_DEVICE_ONE_NAND 4 +#define BOOT_DEVICE_MMC1 5 +#define BOOT_DEVICE_MMC2 6 +#define BOOT_DEVICE_MMC2_2 7 +#define BOOT_DEVICE_NOR 8 +#define BOOT_DEVICE_I2C 9 +#define BOOT_DEVICE_SPI 10 + +#endif diff --git a/arch/arm/include/asm/arch-mx35/sys_proto.h b/arch/arm/include/asm/arch-mx35/sys_proto.h index 9c0d51321de..aa3549cb0dd 100644 --- a/arch/arm/include/asm/arch-mx35/sys_proto.h +++ b/arch/arm/include/asm/arch-mx35/sys_proto.h @@ -25,6 +25,8 @@ #define _SYS_PROTO_H_ u32 get_cpu_rev(void); +void mx3_setup_sdram_bank(u32 start_address, u32 ddr2_config, + u32 row, u32 col, u32 dsize, u32 refresh); #define is_soc_rev(rev) ((get_cpu_rev() & 0xFF) - rev) #endif diff --git a/arch/arm/include/asm/arch-mx5/mx5x_pins.h b/arch/arm/include/asm/arch-mx5/mx5x_pins.h index 122fbeef6ad..3457f6a6320 100644 --- a/arch/arm/include/asm/arch-mx5/mx5x_pins.h +++ b/arch/arm/include/asm/arch-mx5/mx5x_pins.h @@ -802,22 +802,22 @@ typedef enum iomux_input_select { MX53_CSPI_IPP_CSPI_CLK_IN_SELECT_INPUT, MX53_CSPI_IPP_IND_MISO_SELECT_INPUT, MX53_CSPI_IPP_IND_MOSI_SELECT_INPUT, + MX53_CSPI_IPP_IND_SS_B_0_SELECT_INPUT, MX53_CSPI_IPP_IND_SS_B_1_SELECT_INPUT, MX53_CSPI_IPP_IND_SS_B_2_SELECT_INPUT, MX53_CSPI_IPP_IND_SS_B_3_SELECT_INPUT, - MX53_CSPI_IPP_IND_SS_B_4_SELECT_INPUT, MX53_ECSPI1_IPP_CSPI_CLK_IN_SELECT_INPUT, MX53_ECSPI1_IPP_IND_MISO_SELECT_INPUT, MX53_ECSPI1_IPP_IND_MOSI_SELECT_INPUT, + MX53_ECSPI1_IPP_IND_SS_B_0_SELECT_INPUT, MX53_ECSPI1_IPP_IND_SS_B_1_SELECT_INPUT, MX53_ECSPI1_IPP_IND_SS_B_2_SELECT_INPUT, MX53_ECSPI1_IPP_IND_SS_B_3_SELECT_INPUT, - MX53_ECSPI1_IPP_IND_SS_B_4_SELECT_INPUT, MX53_ECSPI2_IPP_CSPI_CLK_IN_SELECT_INPUT, MX53_ECSPI2_IPP_IND_MISO_SELECT_INPUT, MX53_ECSPI2_IPP_IND_MOSI_SELECT_INPUT, + MX53_ECSPI2_IPP_IND_SS_B_0_SELECT_INPUT, MX53_ECSPI2_IPP_IND_SS_B_1_SELECT_INPUT, - MX53_ECSPI2_IPP_IND_SS_B_2_SELECT_INPUT, MX53_ESAI1_IPP_IND_FSR_SELECT_INPUT, MX53_ESAI1_IPP_IND_FST_SELECT_INPUT, MX53_ESAI1_IPP_IND_HCKR_SELECT_INPUT, diff --git a/arch/arm/include/asm/arch-mx5/sys_proto.h b/arch/arm/include/asm/arch-mx5/sys_proto.h index 7b5246eea67..93ad1c6b336 100644 --- a/arch/arm/include/asm/arch-mx5/sys_proto.h +++ b/arch/arm/include/asm/arch-mx5/sys_proto.h @@ -24,8 +24,16 @@ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_ -u32 get_cpu_rev(void); +#define MXC_CPU_MX51 0x51 +#define MXC_CPU_MX53 0x53 +#define MXC_CPU_MX6SL 0x60 +#define MXC_CPU_MX6DL 0x61 +#define MXC_CPU_MX6SOLO 0x62 +#define MXC_CPU_MX6Q 0x63 + #define is_soc_rev(rev) ((get_cpu_rev() & 0xFF) - rev) +u32 get_cpu_rev(void); +unsigned imx_ddr_size(void); void sdelay(unsigned long); void set_chipselect_size(int const); diff --git a/arch/arm/include/asm/arch-mx6/imx-regs.h b/arch/arm/include/asm/arch-mx6/imx-regs.h index 09ab010138b..3eb0081ca80 100644 --- a/arch/arm/include/asm/arch-mx6/imx-regs.h +++ b/arch/arm/include/asm/arch-mx6/imx-regs.h @@ -564,6 +564,8 @@ struct anatop_regs { u32 usb2_misc_clr; /* 0x258 */ u32 usb2_misc_tog; /* 0x25c */ u32 digprog; /* 0x260 */ + u32 reserved1[7]; + u32 digprog_sololite; /* 0x280 */ }; #define ANATOP_PFD_480_PFD0_FRAC_SHIFT 0 diff --git a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h new file mode 100644 index 00000000000..79e2c4f5a41 --- /dev/null +++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h @@ -0,0 +1,149 @@ +/* + * Copyright (C) 2012 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +#ifndef __ASM_ARCH_MX6_MX6DL_PINS_H__ +#define __ASM_ARCH_MX6_MX6DL_PINS_H__ + +#include <asm/imx-common/iomux-v3.h> + +/* Use to set PAD control */ +#define PAD_CTL_HYS (1 << 16) +#define PAD_CTL_PUS_100K_DOWN (0 << 14) +#define PAD_CTL_PUS_47K_UP (1 << 14) +#define PAD_CTL_PUS_100K_UP (2 << 14) +#define PAD_CTL_PUS_22K_UP (3 << 14) + +#define PAD_CTL_PUE (1 << 13) +#define PAD_CTL_PKE (1 << 12) +#define PAD_CTL_ODE (1 << 11) +#define PAD_CTL_SPEED_LOW (1 << 6) +#define PAD_CTL_SPEED_MED (2 << 6) +#define PAD_CTL_SPEED_HIGH (3 << 6) +#define PAD_CTL_DSE_DISABLE (0 << 3) +#define PAD_CTL_DSE_240ohm (1 << 3) +#define PAD_CTL_DSE_120ohm (2 << 3) +#define PAD_CTL_DSE_80ohm (3 << 3) +#define PAD_CTL_DSE_60ohm (4 << 3) +#define PAD_CTL_DSE_48ohm (5 << 3) +#define PAD_CTL_DSE_40ohm (6 << 3) +#define PAD_CTL_DSE_34ohm (7 << 3) +#define PAD_CTL_SRE_FAST (1 << 0) +#define PAD_CTL_SRE_SLOW (0 << 0) + +#define IOMUX_CONFIG_SION 0x10 +#define NO_MUX_I 0 +#define NO_PAD_I 0 +enum { + MX6DL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK = IOMUX_PAD(0x03B0, 0x009C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DI0_PIN15__IPU1_DI0_PIN15 = IOMUX_PAD(0x03B4, 0x00A0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DI0_PIN2__IPU1_DI0_PIN2 = IOMUX_PAD(0x03B8, 0x00A4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DI0_PIN3__IPU1_DI0_PIN3 = IOMUX_PAD(0x03BC, 0x00A8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DI0_PIN4__GPIO_4_20 = IOMUX_PAD(0x03C0, 0x00AC, 5, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0 = IOMUX_PAD(0x03C4, 0x00B0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1 = IOMUX_PAD(0x03C8, 0x00B4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10 = IOMUX_PAD(0x03CC, 0x00B8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11 = IOMUX_PAD(0x03D0, 0x00BC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12 = IOMUX_PAD(0x03D4, 0x00C0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13 = IOMUX_PAD(0x03D8, 0x00C4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14 = IOMUX_PAD(0x03DC, 0x00C8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15 = IOMUX_PAD(0x03E0, 0x00CC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16 = IOMUX_PAD(0x03E4, 0x00D0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17 = IOMUX_PAD(0x03E8, 0x00D4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18 = IOMUX_PAD(0x03EC, 0x00D8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19 = IOMUX_PAD(0x03F0, 0x00DC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2 = IOMUX_PAD(0x03F4, 0x00E0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20 = IOMUX_PAD(0x03F8, 0x00E4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21 = IOMUX_PAD(0x03FC, 0x00E8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22 = IOMUX_PAD(0x0400, 0x00EC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23 = IOMUX_PAD(0x0404, 0x00F0, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3 = IOMUX_PAD(0x0408, 0x00F4, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4 = IOMUX_PAD(0x040C, 0x00F8, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5 = IOMUX_PAD(0x0410, 0x00FC, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6 = IOMUX_PAD(0x0414, 0x0100, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7 = IOMUX_PAD(0x0418, 0x0104, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8 = IOMUX_PAD(0x041C, 0x0108, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9 = IOMUX_PAD(0x0420, 0x010C, 0, 0x0000, 0, PAD_CTL_DSE_120ohm), + MX6DL_PAD_EIM_D16__ECSPI1_SCLK = IOMUX_PAD(0x0514, 0x0144, 1, 0x07D8, 2, 0), + MX6DL_PAD_EIM_D17__ECSPI1_MISO = IOMUX_PAD(0x0518, 0x0148, 1, 0x07DC, 2, 0), + MX6DL_PAD_EIM_D18__ECSPI1_MOSI = IOMUX_PAD(0x051C, 0x014C, 1, 0x07E0, 2, 0), + MX6DL_PAD_EIM_D19__GPIO_3_19 = IOMUX_PAD(0x0520, 0x0150, 5, 0x0000, 0, 0), + MX6DL_PAD_EIM_D21__GPIO_3_21 = IOMUX_PAD(0x0528, 0x0158, 5, 0x0000, 0, 0), + MX6DL_PAD_EIM_D21__I2C1_SCL = IOMUX_PAD(0x0528, 0x0158, 6 | IOMUX_CONFIG_SION, 0x0868, 1, 0), + MX6DL_PAD_EIM_D23__GPIO_3_23 = IOMUX_PAD(0x0530, 0x0160, 5, 0x0000, 0, 0), + MX6DL_PAD_EIM_D26__UART2_TXD = IOMUX_PAD(0x053C, 0x016C, 4, 0x0000, 0, 0), + MX6DL_PAD_EIM_D27__UART2_RXD = IOMUX_PAD(0x0540, 0x0170, 4, 0x0904, 1, 0), + MX6DL_PAD_EIM_D28__I2C1_SDA = IOMUX_PAD(0x0544, 0x0174, 1 | IOMUX_CONFIG_SION, 0x086C, 1, 0), + MX6DL_PAD_EIM_D28__GPIO_3_28 = IOMUX_PAD(0x0544, 0x0174, 5, 0x0000, 0, 0), + MX6DL_PAD_ENET_MDC__ENET_MDC = IOMUX_PAD(0x05B8, 0x01E8, 1, 0x0000, 0, 0), + MX6DL_PAD_ENET_MDIO__ENET_MDIO = IOMUX_PAD(0x05BC, 0x01EC, 1, 0x0810, 0, 0), + MX6DL_PAD_ENET_REF_CLK__ENET_TX_CLK = IOMUX_PAD(0x05C0, 0x01F0, 1, 0x0000, 0, 0), + MX6DL_PAD_ENET_RXD0__GPIO_1_27 = IOMUX_PAD(0x05C8, 0x01F8, 5, 0x0000, 0, 0), + MX6DL_PAD_GPIO_16__GPIO_7_11 = IOMUX_PAD(0x05E4, 0x0214, 5, 0x0000, 0, 0), + MX6DL_PAD_GPIO_16__I2C3_SDA = IOMUX_PAD(0x05E4, 0x0214, 6 | IOMUX_CONFIG_SION, 0x087C, 1, 0), + MX6DL_PAD_GPIO_17__GPIO_7_12 = IOMUX_PAD(0x05E8, 0x0218, 5, 0x0000, 0, 0), + MX6DL_PAD_GPIO_18__GPIO_7_13 = IOMUX_PAD(0x05EC, 0x021C, 5, 0x0000, 0, 0), + MX6DL_PAD_GPIO_19__GPIO_4_5 = IOMUX_PAD(0x05F0, 0x0220, 5, 0x0000, 0, 0), + MX6DL_PAD_GPIO_5__GPIO_1_5 = IOMUX_PAD(0x0600, 0x0230, 5, 0x0000, 0, 0), + MX6DL_PAD_GPIO_5__I2C3_SCL = IOMUX_PAD(0x0600, 0x0230, 6 | IOMUX_CONFIG_SION, 0x0878, 2, 0), + MX6DL_PAD_KEY_COL3__I2C2_SCL = IOMUX_PAD(0x0638, 0x0250, 4 | IOMUX_CONFIG_SION, 0x0870, 1, 0), + MX6DL_PAD_KEY_COL3__GPIO_4_12 = IOMUX_PAD(0x0638, 0x0250, 5, 0x0000, 0, 0), + MX6DL_PAD_KEY_ROW3__I2C2_SDA = IOMUX_PAD(0x064C, 0x0264, 4 | IOMUX_CONFIG_SION, 0x0874, 1, 0), + MX6DL_PAD_KEY_ROW3__GPIO_4_13 = IOMUX_PAD(0x064C, 0x0264, 5, 0x0000, 0, 0), + MX6DL_PAD_NANDF_D1__GPIO_2_1 = IOMUX_PAD(0x0670, 0x0288, 5, 0x0000, 0, 0), + MX6DL_PAD_NANDF_D2__GPIO_2_2 = IOMUX_PAD(0x0674, 0x028C, 5, 0x0000, 0, 0), + MX6DL_PAD_NANDF_D3__GPIO_2_3 = IOMUX_PAD(0x0678, 0x0290, 5, 0x0000, 0, 0), + MX6DL_PAD_NANDF_D4__GPIO_2_4 = IOMUX_PAD(0x067C, 0x0294, 5, 0x0000, 0, 0), + MX6DL_PAD_NANDF_D6__GPIO_2_6 = IOMUX_PAD(0x0684, 0x029C, 5, 0x0000, 0, 0), + MX6DL_PAD_RGMII_RD0__ENET_RGMII_RD0 = IOMUX_PAD(0x0694, 0x02AC, 1, 0x0818, 1, 0), + MX6DL_PAD_RGMII_RD0__GPIO_6_25 = IOMUX_PAD(0x0694, 0x02AC, 5, 0x0000, 0, 0), + MX6DL_PAD_RGMII_RD1__ENET_RGMII_RD1 = IOMUX_PAD(0x0698, 0x02B0, 1, 0x081C, 1, 0), + MX6DL_PAD_RGMII_RD1__GPIO_6_27 = IOMUX_PAD(0x0698, 0x02B0, 5, 0x0000, 0, 0), + MX6DL_PAD_RGMII_RD2__ENET_RGMII_RD2 = IOMUX_PAD(0x069C, 0x02B4, 1, 0x0820, 1, 0), + MX6DL_PAD_RGMII_RD2__GPIO_6_28 = IOMUX_PAD(0x069C, 0x02B4, 5, 0x0000, 0, 0), + MX6DL_PAD_RGMII_RD3__ENET_RGMII_RD3 = IOMUX_PAD(0x06A0, 0x02B8, 1, 0x0824, 1, 0), + MX6DL_PAD_RGMII_RD3__GPIO_6_29 = IOMUX_PAD(0x06A0, 0x02B8, 5, 0x0000, 0, 0), + MX6DL_PAD_RGMII_RX_CTL__RGMII_RX_CTL = IOMUX_PAD(0x06A4, 0x02BC, 1, 0x0828, 1, 0), + MX6DL_PAD_RGMII_RX_CTL__GPIO_6_24 = IOMUX_PAD(0x06A4, 0x02BC, 5, 0x0000, 0, 0), + MX6DL_PAD_RGMII_RXC__ENET_RGMII_RXC = IOMUX_PAD(0x06A8, 0x02C0, 1, 0x0814, 1, 0), + MX6DL_PAD_RGMII_RXC__GPIO_6_30 = IOMUX_PAD(0x06A8, 0x02C0, 5, 0x0000, 0, 0), + MX6DL_PAD_RGMII_TD0__ENET_RGMII_TD0 = IOMUX_PAD(0x06AC, 0x02C4, 1, 0x0000, 0, 0), + MX6DL_PAD_RGMII_TD1__ENET_RGMII_TD1 = IOMUX_PAD(0x06B0, 0x02C8, 1, 0x0000, 0, 0), + MX6DL_PAD_RGMII_TD2__ENET_RGMII_TD2 = IOMUX_PAD(0x06B4, 0x02CC, 1, 0x0000, 0, 0), + MX6DL_PAD_RGMII_TD3__ENET_RGMII_TD3 = IOMUX_PAD(0x06B8, 0x02D0, 1, 0x0000, 0, 0), + MX6DL_PAD_RGMII_TX_CTL__RGMII_TX_CTL = IOMUX_PAD(0x06BC, 0x02D4, 1, 0x0000, 0, 0), + MX6DL_PAD_RGMII_TXC__ENET_RGMII_TXC = IOMUX_PAD(0x06C0, 0x02D8, 1, 0x0000, 0, 0), + MX6DL_PAD_SD1_CMD__GPIO_1_18 = IOMUX_PAD(0x06C8, 0x02E0, 5, 0x0000, 0, 0), + MX6DL_PAD_SD1_DAT3__GPIO_1_21 = IOMUX_PAD(0x06D8, 0x02F0, 5, 0x0000, 0, 0), + MX6DL_PAD_SD3_CLK__USDHC3_CLK = IOMUX_PAD(0x06F4, 0x030C, 0, 0x0934, 1, 0), + MX6DL_PAD_SD3_CMD__USDHC3_CMD = IOMUX_PAD(0x06F8, 0x0310, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0), + MX6DL_PAD_SD3_DAT0__USDHC3_DAT0 = IOMUX_PAD(0x06FC, 0x0314, 0, 0x0000, 0, 0), + MX6DL_PAD_SD3_DAT1__USDHC3_DAT1 = IOMUX_PAD(0x0700, 0x0318, 0, 0x0000, 0, 0), + MX6DL_PAD_SD3_DAT2__USDHC3_DAT2 = IOMUX_PAD(0x0704, 0x031C, 0, 0x0000, 0, 0), + MX6DL_PAD_SD3_DAT3__USDHC3_DAT3 = IOMUX_PAD(0x0708, 0x0320, 0, 0x0000, 0, 0), + MX6DL_PAD_SD3_DAT5__GPIO_7_0 = IOMUX_PAD(0x0710, 0x0328, 5, 0x0000, 0, 0), + MX6DL_PAD_SD3_DAT6__UART1_RXD = IOMUX_PAD(0x0714, 0x032C, 1, 0x08FC, 2, 0), + MX6DL_PAD_SD3_DAT7__UART1_TXD = IOMUX_PAD(0x0718, 0x0330, 1, 0x0000, 0, 0), + MX6DL_PAD_SD4_CLK__USDHC4_CLK = IOMUX_PAD(0x0720, 0x0338, 0, 0x0938, 1, 0), + MX6DL_PAD_SD4_CMD__USDHC4_CMD = IOMUX_PAD(0x0724, 0x033C, 0 | IOMUX_CONFIG_SION, 0x0000, 0, 0), + MX6DL_PAD_SD4_DAT0__USDHC4_DAT0 = IOMUX_PAD(0x0728, 0x0340, 1, 0x0000, 0, 0), + MX6DL_PAD_SD4_DAT1__USDHC4_DAT1 = IOMUX_PAD(0x072C, 0x0344, 1, 0x0000, 0, 0), + MX6DL_PAD_SD4_DAT2__USDHC4_DAT2 = IOMUX_PAD(0x0730, 0x0348, 1, 0x0000, 0, 0), + MX6DL_PAD_SD4_DAT3__USDHC4_DAT3 = IOMUX_PAD(0x0734, 0x034C, 1, 0x0000, 0, 0), +}; +#endif /* __ASM_ARCH_MX6_MX6DL_PINS_H__ */ diff --git a/arch/arm/include/asm/arch-mx6/sys_proto.h b/arch/arm/include/asm/arch-mx6/sys_proto.h index 711b30dfe28..31932976104 100644 --- a/arch/arm/include/asm/arch-mx6/sys_proto.h +++ b/arch/arm/include/asm/arch-mx6/sys_proto.h @@ -24,9 +24,17 @@ #ifndef _SYS_PROTO_H_ #define _SYS_PROTO_H_ -#define is_soc_rev(rev) ((get_cpu_rev() & 0xFF) - rev) +#define MXC_CPU_MX51 0x51 +#define MXC_CPU_MX53 0x53 +#define MXC_CPU_MX6SL 0x60 +#define MXC_CPU_MX6DL 0x61 +#define MXC_CPU_MX6SOLO 0x62 +#define MXC_CPU_MX6Q 0x63 +#define is_soc_rev(rev) ((get_cpu_rev() & 0xFF) - rev) u32 get_cpu_rev(void); +const char *get_imx_type(u32 imxtype); +unsigned imx_ddr_size(void); void set_vddsoc(u32 mv); diff --git a/arch/arm/include/asm/arch-mxs/regs-power.h b/arch/arm/include/asm/arch-mxs/regs-power.h index a46a3726823..257ee88e82e 100644 --- a/arch/arm/include/asm/arch-mxs/regs-power.h +++ b/arch/arm/include/asm/arch-mxs/regs-power.h @@ -128,7 +128,7 @@ struct mxs_power_regs { #define POWER_MINPWR_PWD_ANA_CMPS (1 << 10) #define POWER_MINPWR_ENABLE_OSC (1 << 9) #define POWER_MINPWR_SELECT_OSC (1 << 8) -#define POWER_MINPWR_FBG_OFF (1 << 7) +#define POWER_MINPWR_VBG_OFF (1 << 7) #define POWER_MINPWR_DOUBLE_FETS (1 << 6) #define POWER_MINPWR_HALFFETS (1 << 5) #define POWER_MINPWR_LESSANA_I (1 << 4) @@ -268,7 +268,7 @@ struct mxs_power_regs { #define POWER_DCLIMITS_POSLIMIT_BUCK_MASK (0x7f << 8) #define POWER_DCLIMITS_POSLIMIT_BUCK_OFFSET 8 #define POWER_DCLIMITS_NEGLIMIT_MASK 0x7f -#define POWER_DCLIMITS_NETLIMIT_OFFSET 0 +#define POWER_DCLIMITS_NEGLIMIT_OFFSET 0 #define POWER_LOOPCTRL_TOGGLE_DIF (1 << 20) #define POWER_LOOPCTRL_HYST_SIGN (1 << 19) diff --git a/arch/arm/include/asm/arch-s5pc1xx/gpio.h b/arch/arm/include/asm/arch-s5pc1xx/gpio.h index 76b901b3977..00e498d834b 100644 --- a/arch/arm/include/asm/arch-s5pc1xx/gpio.h +++ b/arch/arm/include/asm/arch-s5pc1xx/gpio.h @@ -143,7 +143,12 @@ static inline unsigned int s5p_gpio_base(int nr) return S5PC110_GPIO_BASE; } -#define s5pc110_gpio_get_nr(bank, pin) \ +static inline unsigned int s5p_gpio_part_max(int nr) +{ + return 0; +} + +#define s5pc110_gpio_get_nr(bank, pin) \ ((((((unsigned int)&(((struct s5pc110_gpio *)S5PC110_GPIO_BASE)->bank))\ - S5PC110_GPIO_BASE) / sizeof(struct s5p_gpio_bank)) \ * GPIO_PER_BANK) + pin) diff --git a/arch/arm/include/asm/arch-tegra20/dc.h b/arch/arm/include/asm/arch-tegra20/dc.h new file mode 100644 index 00000000000..37934e1c6c4 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/dc.h @@ -0,0 +1,545 @@ +/* + * (C) Copyright 2010 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_TEGRA_DC_H +#define __ASM_ARCH_TEGRA_DC_H + +/* Register definitions for the Tegra display controller */ + +/* CMD register 0x000 ~ 0x43 */ +struct dc_cmd_reg { + /* Address 0x000 ~ 0x002 */ + uint gen_incr_syncpt; /* _CMD_GENERAL_INCR_SYNCPT_0 */ + uint gen_incr_syncpt_ctrl; /* _CMD_GENERAL_INCR_SYNCPT_CNTRL_0 */ + uint gen_incr_syncpt_err; /* _CMD_GENERAL_INCR_SYNCPT_ERROR_0 */ + + uint reserved0[5]; /* reserved_0[5] */ + + /* Address 0x008 ~ 0x00a */ + uint win_a_incr_syncpt; /* _CMD_WIN_A_INCR_SYNCPT_0 */ + uint win_a_incr_syncpt_ctrl; /* _CMD_WIN_A_INCR_SYNCPT_CNTRL_0 */ + uint win_a_incr_syncpt_err; /* _CMD_WIN_A_INCR_SYNCPT_ERROR_0 */ + + uint reserved1[5]; /* reserved_1[5] */ + + /* Address 0x010 ~ 0x012 */ + uint win_b_incr_syncpt; /* _CMD_WIN_B_INCR_SYNCPT_0 */ + uint win_b_incr_syncpt_ctrl; /* _CMD_WIN_B_INCR_SYNCPT_CNTRL_0 */ + uint win_b_incr_syncpt_err; /* _CMD_WIN_B_INCR_SYNCPT_ERROR_0 */ + + uint reserved2[5]; /* reserved_2[5] */ + + /* Address 0x018 ~ 0x01a */ + uint win_c_incr_syncpt; /* _CMD_WIN_C_INCR_SYNCPT_0 */ + uint win_c_incr_syncpt_ctrl; /* _CMD_WIN_C_INCR_SYNCPT_CNTRL_0 */ + uint win_c_incr_syncpt_err; /* _CMD_WIN_C_INCR_SYNCPT_ERROR_0 */ + + uint reserved3[13]; /* reserved_3[13] */ + + /* Address 0x028 */ + uint cont_syncpt_vsync; /* _CMD_CONT_SYNCPT_VSYNC_0 */ + + uint reserved4[7]; /* reserved_4[7] */ + + /* Address 0x030 ~ 0x033 */ + uint ctxsw; /* _CMD_CTXSW_0 */ + uint disp_cmd_opt0; /* _CMD_DISPLAY_COMMAND_OPTION0_0 */ + uint disp_cmd; /* _CMD_DISPLAY_COMMAND_0 */ + uint sig_raise; /* _CMD_SIGNAL_RAISE_0 */ + + uint reserved5[2]; /* reserved_0[2] */ + + /* Address 0x036 ~ 0x03e */ + uint disp_pow_ctrl; /* _CMD_DISPLAY_POWER_CONTROL_0 */ + uint int_stat; /* _CMD_INT_STATUS_0 */ + uint int_mask; /* _CMD_INT_MASK_0 */ + uint int_enb; /* _CMD_INT_ENABLE_0 */ + uint int_type; /* _CMD_INT_TYPE_0 */ + uint int_polarity; /* _CMD_INT_POLARITY_0 */ + uint sig_raise1; /* _CMD_SIGNAL_RAISE1_0 */ + uint sig_raise2; /* _CMD_SIGNAL_RAISE2_0 */ + uint sig_raise3; /* _CMD_SIGNAL_RAISE3_0 */ + + uint reserved6; /* reserved_6 */ + + /* Address 0x040 ~ 0x043 */ + uint state_access; /* _CMD_STATE_ACCESS_0 */ + uint state_ctrl; /* _CMD_STATE_CONTROL_0 */ + uint disp_win_header; /* _CMD_DISPLAY_WINDOW_HEADER_0 */ + uint reg_act_ctrl; /* _CMD_REG_ACT_CONTROL_0 */ +}; + +enum { + PIN_REG_COUNT = 4, + PIN_OUTPUT_SEL_COUNT = 7, +}; + +/* COM register 0x300 ~ 0x329 */ +struct dc_com_reg { + /* Address 0x300 ~ 0x301 */ + uint crc_ctrl; /* _COM_CRC_CONTROL_0 */ + uint crc_checksum; /* _COM_CRC_CHECKSUM_0 */ + + /* _COM_PIN_OUTPUT_ENABLE0/1/2/3_0: Address 0x302 ~ 0x305 */ + uint pin_output_enb[PIN_REG_COUNT]; + + /* _COM_PIN_OUTPUT_POLARITY0/1/2/3_0: Address 0x306 ~ 0x309 */ + uint pin_output_polarity[PIN_REG_COUNT]; + + /* _COM_PIN_OUTPUT_DATA0/1/2/3_0: Address 0x30a ~ 0x30d */ + uint pin_output_data[PIN_REG_COUNT]; + + /* _COM_PIN_INPUT_ENABLE0_0: Address 0x30e ~ 0x311 */ + uint pin_input_enb[PIN_REG_COUNT]; + + /* Address 0x312 ~ 0x313 */ + uint pin_input_data0; /* _COM_PIN_INPUT_DATA0_0 */ + uint pin_input_data1; /* _COM_PIN_INPUT_DATA1_0 */ + + /* _COM_PIN_OUTPUT_SELECT0/1/2/3/4/5/6_0: Address 0x314 ~ 0x31a */ + uint pin_output_sel[PIN_OUTPUT_SEL_COUNT]; + + /* Address 0x31b ~ 0x329 */ + uint pin_misc_ctrl; /* _COM_PIN_MISC_CONTROL_0 */ + uint pm0_ctrl; /* _COM_PM0_CONTROL_0 */ + uint pm0_duty_cycle; /* _COM_PM0_DUTY_CYCLE_0 */ + uint pm1_ctrl; /* _COM_PM1_CONTROL_0 */ + uint pm1_duty_cycle; /* _COM_PM1_DUTY_CYCLE_0 */ + uint spi_ctrl; /* _COM_SPI_CONTROL_0 */ + uint spi_start_byte; /* _COM_SPI_START_BYTE_0 */ + uint hspi_wr_data_ab; /* _COM_HSPI_WRITE_DATA_AB_0 */ + uint hspi_wr_data_cd; /* _COM_HSPI_WRITE_DATA_CD */ + uint hspi_cs_dc; /* _COM_HSPI_CS_DC_0 */ + uint scratch_reg_a; /* _COM_SCRATCH_REGISTER_A_0 */ + uint scratch_reg_b; /* _COM_SCRATCH_REGISTER_B_0 */ + uint gpio_ctrl; /* _COM_GPIO_CTRL_0 */ + uint gpio_debounce_cnt; /* _COM_GPIO_DEBOUNCE_COUNTER_0 */ + uint crc_checksum_latched; /* _COM_CRC_CHECKSUM_LATCHED_0 */ +}; + +enum dc_disp_h_pulse_pos { + H_PULSE0_POSITION_A, + H_PULSE0_POSITION_B, + H_PULSE0_POSITION_C, + H_PULSE0_POSITION_D, + H_PULSE0_POSITION_COUNT, +}; + +struct _disp_h_pulse { + /* _DISP_H_PULSE0/1/2_CONTROL_0 */ + uint h_pulse_ctrl; + /* _DISP_H_PULSE0/1/2_POSITION_A/B/C/D_0 */ + uint h_pulse_pos[H_PULSE0_POSITION_COUNT]; +}; + +enum dc_disp_v_pulse_pos { + V_PULSE0_POSITION_A, + V_PULSE0_POSITION_B, + V_PULSE0_POSITION_C, + V_PULSE0_POSITION_COUNT, +}; + +struct _disp_v_pulse0 { + /* _DISP_H_PULSE0/1_CONTROL_0 */ + uint v_pulse_ctrl; + /* _DISP_H_PULSE0/1_POSITION_A/B/C_0 */ + uint v_pulse_pos[V_PULSE0_POSITION_COUNT]; +}; + +struct _disp_v_pulse2 { + /* _DISP_H_PULSE2/3_CONTROL_0 */ + uint v_pulse_ctrl; + /* _DISP_H_PULSE2/3_POSITION_A_0 */ + uint v_pulse_pos_a; +}; + +enum dc_disp_h_pulse_reg { + H_PULSE0, + H_PULSE1, + H_PULSE2, + H_PULSE_COUNT, +}; + +enum dc_disp_pp_select { + PP_SELECT_A, + PP_SELECT_B, + PP_SELECT_C, + PP_SELECT_D, + PP_SELECT_COUNT, +}; + +/* DISP register 0x400 ~ 0x4c1 */ +struct dc_disp_reg { + /* Address 0x400 ~ 0x40a */ + uint disp_signal_opt0; /* _DISP_DISP_SIGNAL_OPTIONS0_0 */ + uint disp_signal_opt1; /* _DISP_DISP_SIGNAL_OPTIONS1_0 */ + uint disp_win_opt; /* _DISP_DISP_WIN_OPTIONS_0 */ + uint mem_high_pri; /* _DISP_MEM_HIGH_PRIORITY_0 */ + uint mem_high_pri_timer; /* _DISP_MEM_HIGH_PRIORITY_TIMER_0 */ + uint disp_timing_opt; /* _DISP_DISP_TIMING_OPTIONS_0 */ + uint ref_to_sync; /* _DISP_REF_TO_SYNC_0 */ + uint sync_width; /* _DISP_SYNC_WIDTH_0 */ + uint back_porch; /* _DISP_BACK_PORCH_0 */ + uint disp_active; /* _DISP_DISP_ACTIVE_0 */ + uint front_porch; /* _DISP_FRONT_PORCH_0 */ + + /* Address 0x40b ~ 0x419: _DISP_H_PULSE0/1/2_ */ + struct _disp_h_pulse h_pulse[H_PULSE_COUNT]; + + /* Address 0x41a ~ 0x421 */ + struct _disp_v_pulse0 v_pulse0; /* _DISP_V_PULSE0_ */ + struct _disp_v_pulse0 v_pulse1; /* _DISP_V_PULSE1_ */ + + /* Address 0x422 ~ 0x425 */ + struct _disp_v_pulse2 v_pulse3; /* _DISP_V_PULSE2_ */ + struct _disp_v_pulse2 v_pulse4; /* _DISP_V_PULSE3_ */ + + /* Address 0x426 ~ 0x429 */ + uint m0_ctrl; /* _DISP_M0_CONTROL_0 */ + uint m1_ctrl; /* _DISP_M1_CONTROL_0 */ + uint di_ctrl; /* _DISP_DI_CONTROL_0 */ + uint pp_ctrl; /* _DISP_PP_CONTROL_0 */ + + /* Address 0x42a ~ 0x42d: _DISP_PP_SELECT_A/B/C/D_0 */ + uint pp_select[PP_SELECT_COUNT]; + + /* Address 0x42e ~ 0x435 */ + uint disp_clk_ctrl; /* _DISP_DISP_CLOCK_CONTROL_0 */ + uint disp_interface_ctrl; /* _DISP_DISP_INTERFACE_CONTROL_0 */ + uint disp_color_ctrl; /* _DISP_DISP_COLOR_CONTROL_0 */ + uint shift_clk_opt; /* _DISP_SHIFT_CLOCK_OPTIONS_0 */ + uint data_enable_opt; /* _DISP_DATA_ENABLE_OPTIONS_0 */ + uint serial_interface_opt; /* _DISP_SERIAL_INTERFACE_OPTIONS_0 */ + uint lcd_spi_opt; /* _DISP_LCD_SPI_OPTIONS_0 */ + uint border_color; /* _DISP_BORDER_COLOR_0 */ + + /* Address 0x436 ~ 0x439 */ + uint color_key0_lower; /* _DISP_COLOR_KEY0_LOWER_0 */ + uint color_key0_upper; /* _DISP_COLOR_KEY0_UPPER_0 */ + uint color_key1_lower; /* _DISP_COLOR_KEY1_LOWER_0 */ + uint color_key1_upper; /* _DISP_COLOR_KEY1_UPPER_0 */ + + uint reserved0[2]; /* reserved_0[2] */ + + /* Address 0x43c ~ 0x442 */ + uint cursor_foreground; /* _DISP_CURSOR_FOREGROUND_0 */ + uint cursor_background; /* _DISP_CURSOR_BACKGROUND_0 */ + uint cursor_start_addr; /* _DISP_CURSOR_START_ADDR_0 */ + uint cursor_start_addr_ns; /* _DISP_CURSOR_START_ADDR_NS_0 */ + uint cursor_pos; /* _DISP_CURSOR_POSITION_0 */ + uint cursor_pos_ns; /* _DISP_CURSOR_POSITION_NS_0 */ + uint seq_ctrl; /* _DISP_INIT_SEQ_CONTROL_0 */ + + /* Address 0x442 ~ 0x446 */ + uint spi_init_seq_data_a; /* _DISP_SPI_INIT_SEQ_DATA_A_0 */ + uint spi_init_seq_data_b; /* _DISP_SPI_INIT_SEQ_DATA_B_0 */ + uint spi_init_seq_data_c; /* _DISP_SPI_INIT_SEQ_DATA_C_0 */ + uint spi_init_seq_data_d; /* _DISP_SPI_INIT_SEQ_DATA_D_0 */ + + uint reserved1[0x39]; /* reserved1[0x39], */ + + /* Address 0x480 ~ 0x484 */ + uint dc_mccif_fifoctrl; /* _DISP_DC_MCCIF_FIFOCTRL_0 */ + uint mccif_disp0a_hyst; /* _DISP_MCCIF_DISPLAY0A_HYST_0 */ + uint mccif_disp0b_hyst; /* _DISP_MCCIF_DISPLAY0B_HYST_0 */ + uint mccif_disp0c_hyst; /* _DISP_MCCIF_DISPLAY0C_HYST_0 */ + uint mccif_disp1b_hyst; /* _DISP_MCCIF_DISPLAY1B_HYST_0 */ + + uint reserved2[0x3b]; /* reserved2[0x3b] */ + + /* Address 0x4c0 ~ 0x4c1 */ + uint dac_crt_ctrl; /* _DISP_DAC_CRT_CTRL_0 */ + uint disp_misc_ctrl; /* _DISP_DISP_MISC_CONTROL_0 */ +}; + +enum dc_winc_filter_p { + WINC_FILTER_COUNT = 0x10, +}; + +/* Window A/B/C register 0x500 ~ 0x628 */ +struct dc_winc_reg { + + /* Address 0x500 */ + uint color_palette; /* _WINC_COLOR_PALETTE_0 */ + + uint reserved0[0xff]; /* reserved_0[0xff] */ + + /* Address 0x600 */ + uint palette_color_ext; /* _WINC_PALETTE_COLOR_EXT_0 */ + + /* _WINC_H_FILTER_P00~0F_0 */ + /* Address 0x601 ~ 0x610 */ + uint h_filter_p[WINC_FILTER_COUNT]; + + /* Address 0x611 ~ 0x618 */ + uint csc_yof; /* _WINC_CSC_YOF_0 */ + uint csc_kyrgb; /* _WINC_CSC_KYRGB_0 */ + uint csc_kur; /* _WINC_CSC_KUR_0 */ + uint csc_kvr; /* _WINC_CSC_KVR_0 */ + uint csc_kug; /* _WINC_CSC_KUG_0 */ + uint csc_kvg; /* _WINC_CSC_KVG_0 */ + uint csc_kub; /* _WINC_CSC_KUB_0 */ + uint csc_kvb; /* _WINC_CSC_KVB_0 */ + + /* Address 0x619 ~ 0x628: _WINC_V_FILTER_P00~0F_0 */ + uint v_filter_p[WINC_FILTER_COUNT]; +}; + +/* WIN A/B/C Register 0x700 ~ 0x714*/ +struct dc_win_reg { + /* Address 0x700 ~ 0x714 */ + uint win_opt; /* _WIN_WIN_OPTIONS_0 */ + uint byte_swap; /* _WIN_BYTE_SWAP_0 */ + uint buffer_ctrl; /* _WIN_BUFFER_CONTROL_0 */ + uint color_depth; /* _WIN_COLOR_DEPTH_0 */ + uint pos; /* _WIN_POSITION_0 */ + uint size; /* _WIN_SIZE_0 */ + uint prescaled_size; /* _WIN_PRESCALED_SIZE_0 */ + uint h_initial_dda; /* _WIN_H_INITIAL_DDA_0 */ + uint v_initial_dda; /* _WIN_V_INITIAL_DDA_0 */ + uint dda_increment; /* _WIN_DDA_INCREMENT_0 */ + uint line_stride; /* _WIN_LINE_STRIDE_0 */ + uint buf_stride; /* _WIN_BUF_STRIDE_0 */ + uint uv_buf_stride; /* _WIN_UV_BUF_STRIDE_0 */ + uint buffer_addr_mode; /* _WIN_BUFFER_ADDR_MODE_0 */ + uint dv_ctrl; /* _WIN_DV_CONTROL_0 */ + uint blend_nokey; /* _WIN_BLEND_NOKEY_0 */ + uint blend_1win; /* _WIN_BLEND_1WIN_0 */ + uint blend_2win_x; /* _WIN_BLEND_2WIN_X_0 */ + uint blend_2win_y; /* _WIN_BLEND_2WIN_Y_0 */ + uint blend_3win_xy; /* _WIN_BLEND_3WIN_XY_0 */ + uint hp_fetch_ctrl; /* _WIN_HP_FETCH_CONTROL_0 */ +}; + +/* WINBUF A/B/C Register 0x800 ~ 0x80a */ +struct dc_winbuf_reg { + /* Address 0x800 ~ 0x80a */ + uint start_addr; /* _WINBUF_START_ADDR_0 */ + uint start_addr_ns; /* _WINBUF_START_ADDR_NS_0 */ + uint start_addr_u; /* _WINBUF_START_ADDR_U_0 */ + uint start_addr_u_ns; /* _WINBUF_START_ADDR_U_NS_0 */ + uint start_addr_v; /* _WINBUF_START_ADDR_V_0 */ + uint start_addr_v_ns; /* _WINBUF_START_ADDR_V_NS_0 */ + uint addr_h_offset; /* _WINBUF_ADDR_H_OFFSET_0 */ + uint addr_h_offset_ns; /* _WINBUF_ADDR_H_OFFSET_NS_0 */ + uint addr_v_offset; /* _WINBUF_ADDR_V_OFFSET_0 */ + uint addr_v_offset_ns; /* _WINBUF_ADDR_V_OFFSET_NS_0 */ + uint uflow_status; /* _WINBUF_UFLOW_STATUS_0 */ +}; + +/* Display Controller (DC_) regs */ +struct dc_ctlr { + struct dc_cmd_reg cmd; /* CMD register 0x000 ~ 0x43 */ + uint reserved0[0x2bc]; + + struct dc_com_reg com; /* COM register 0x300 ~ 0x329 */ + uint reserved1[0xd6]; + + struct dc_disp_reg disp; /* DISP register 0x400 ~ 0x4c1 */ + uint reserved2[0x3e]; + + struct dc_winc_reg winc; /* Window A/B/C 0x500 ~ 0x628 */ + uint reserved3[0xd7]; + + struct dc_win_reg win; /* WIN A/B/C 0x700 ~ 0x714*/ + uint reserved4[0xeb]; + + struct dc_winbuf_reg winbuf; /* WINBUF A/B/C 0x800 ~ 0x80a */ +}; + +#define BIT(pos) (1U << pos) + +/* DC_CMD_DISPLAY_COMMAND 0x032 */ +#define CTRL_MODE_SHIFT 5 +#define CTRL_MODE_MASK (0x3 << CTRL_MODE_SHIFT) +enum { + CTRL_MODE_STOP, + CTRL_MODE_C_DISPLAY, + CTRL_MODE_NC_DISPLAY, +}; + +/* _WIN_COLOR_DEPTH_0 */ +enum win_color_depth_id { + COLOR_DEPTH_P1, + COLOR_DEPTH_P2, + COLOR_DEPTH_P4, + COLOR_DEPTH_P8, + COLOR_DEPTH_B4G4R4A4, + COLOR_DEPTH_B5G5R5A, + COLOR_DEPTH_B5G6R5, + COLOR_DEPTH_AB5G5R5, + COLOR_DEPTH_B8G8R8A8 = 12, + COLOR_DEPTH_R8G8B8A8, + COLOR_DEPTH_B6x2G6x2R6x2A8, + COLOR_DEPTH_R6x2G6x2B6x2A8, + COLOR_DEPTH_YCbCr422, + COLOR_DEPTH_YUV422, + COLOR_DEPTH_YCbCr420P, + COLOR_DEPTH_YUV420P, + COLOR_DEPTH_YCbCr422P, + COLOR_DEPTH_YUV422P, + COLOR_DEPTH_YCbCr422R, + COLOR_DEPTH_YUV422R, + COLOR_DEPTH_YCbCr422RA, + COLOR_DEPTH_YUV422RA, +}; + +/* DC_CMD_DISPLAY_POWER_CONTROL 0x036 */ +#define PW0_ENABLE BIT(0) +#define PW1_ENABLE BIT(2) +#define PW2_ENABLE BIT(4) +#define PW3_ENABLE BIT(6) +#define PW4_ENABLE BIT(8) +#define PM0_ENABLE BIT(16) +#define PM1_ENABLE BIT(18) +#define SPI_ENABLE BIT(24) +#define HSPI_ENABLE BIT(25) + +/* DC_CMD_STATE_CONTROL 0x041 */ +#define GENERAL_ACT_REQ BIT(0) +#define WIN_A_ACT_REQ BIT(1) +#define WIN_B_ACT_REQ BIT(2) +#define WIN_C_ACT_REQ BIT(3) +#define GENERAL_UPDATE BIT(8) +#define WIN_A_UPDATE BIT(9) +#define WIN_B_UPDATE BIT(10) +#define WIN_C_UPDATE BIT(11) + +/* DC_CMD_DISPLAY_WINDOW_HEADER 0x042 */ +#define WINDOW_A_SELECT BIT(4) +#define WINDOW_B_SELECT BIT(5) +#define WINDOW_C_SELECT BIT(6) + +/* DC_DISP_DISP_CLOCK_CONTROL 0x42e */ +#define SHIFT_CLK_DIVIDER_SHIFT 0 +#define SHIFT_CLK_DIVIDER_MASK (0xff << SHIFT_CLK_DIVIDER_SHIFT) +#define PIXEL_CLK_DIVIDER_SHIFT 8 +#define PIXEL_CLK_DIVIDER_MSK (0xf << PIXEL_CLK_DIVIDER_SHIFT) +enum { + PIXEL_CLK_DIVIDER_PCD1, + PIXEL_CLK_DIVIDER_PCD1H, + PIXEL_CLK_DIVIDER_PCD2, + PIXEL_CLK_DIVIDER_PCD3, + PIXEL_CLK_DIVIDER_PCD4, + PIXEL_CLK_DIVIDER_PCD6, + PIXEL_CLK_DIVIDER_PCD8, + PIXEL_CLK_DIVIDER_PCD9, + PIXEL_CLK_DIVIDER_PCD12, + PIXEL_CLK_DIVIDER_PCD16, + PIXEL_CLK_DIVIDER_PCD18, + PIXEL_CLK_DIVIDER_PCD24, + PIXEL_CLK_DIVIDER_PCD13, +}; + +/* DC_DISP_DISP_INTERFACE_CONTROL 0x42f */ +#define DATA_FORMAT_SHIFT 0 +#define DATA_FORMAT_MASK (0xf << DATA_FORMAT_SHIFT) +enum { + DATA_FORMAT_DF1P1C, + DATA_FORMAT_DF1P2C24B, + DATA_FORMAT_DF1P2C18B, + DATA_FORMAT_DF1P2C16B, + DATA_FORMAT_DF2S, + DATA_FORMAT_DF3S, + DATA_FORMAT_DFSPI, + DATA_FORMAT_DF1P3C24B, + DATA_FORMAT_DF1P3C18B, +}; +#define DATA_ALIGNMENT_SHIFT 8 +enum { + DATA_ALIGNMENT_MSB, + DATA_ALIGNMENT_LSB, +}; +#define DATA_ORDER_SHIFT 9 +enum { + DATA_ORDER_RED_BLUE, + DATA_ORDER_BLUE_RED, +}; + +/* DC_DISP_DATA_ENABLE_OPTIONS 0x432 */ +#define DE_SELECT_SHIFT 0 +#define DE_SELECT_MASK (0x3 << DE_SELECT_SHIFT) +#define DE_SELECT_ACTIVE_BLANK 0x0 +#define DE_SELECT_ACTIVE 0x1 +#define DE_SELECT_ACTIVE_IS 0x2 +#define DE_CONTROL_SHIFT 2 +#define DE_CONTROL_MASK (0x7 << DE_CONTROL_SHIFT) +enum { + DE_CONTROL_ONECLK, + DE_CONTROL_NORMAL, + DE_CONTROL_EARLY_EXT, + DE_CONTROL_EARLY, + DE_CONTROL_ACTIVE_BLANK, +}; + +/* DC_WIN_WIN_OPTIONS 0x700 */ +#define H_DIRECTION BIT(0) +enum { + H_DIRECTION_INCREMENT, + H_DIRECTION_DECREMENT, +}; +#define V_DIRECTION BIT(2) +enum { + V_DIRECTION_INCREMENT, + V_DIRECTION_DECREMENT, +}; +#define COLOR_EXPAND BIT(6) +#define CP_ENABLE BIT(16) +#define DV_ENABLE BIT(20) +#define WIN_ENABLE BIT(30) + +/* DC_WIN_BYTE_SWAP 0x701 */ +#define BYTE_SWAP_SHIFT 0 +#define BYTE_SWAP_MASK (3 << BYTE_SWAP_SHIFT) +enum { + BYTE_SWAP_NOSWAP, + BYTE_SWAP_SWAP2, + BYTE_SWAP_SWAP4, + BYTE_SWAP_SWAP4HW +}; + +/* DC_WIN_POSITION 0x704 */ +#define H_POSITION_SHIFT 0 +#define H_POSITION_MASK (0x1FFF << H_POSITION_SHIFT) +#define V_POSITION_SHIFT 16 +#define V_POSITION_MASK (0x1FFF << V_POSITION_SHIFT) + +/* DC_WIN_SIZE 0x705 */ +#define H_SIZE_SHIFT 0 +#define H_SIZE_MASK (0x1FFF << H_SIZE_SHIFT) +#define V_SIZE_SHIFT 16 +#define V_SIZE_MASK (0x1FFF << V_SIZE_SHIFT) + +/* DC_WIN_PRESCALED_SIZE 0x706 */ +#define H_PRESCALED_SIZE_SHIFT 0 +#define H_PRESCALED_SIZE_MASK (0x7FFF << H_PRESCALED_SIZE) +#define V_PRESCALED_SIZE_SHIFT 16 +#define V_PRESCALED_SIZE_MASK (0x1FFF << V_PRESCALED_SIZE) + +/* DC_WIN_DDA_INCREMENT 0x709 */ +#define H_DDA_INC_SHIFT 0 +#define H_DDA_INC_MASK (0xFFFF << H_DDA_INC_SHIFT) +#define V_DDA_INC_SHIFT 16 +#define V_DDA_INC_MASK (0xFFFF << V_DDA_INC_SHIFT) + +#endif /* __ASM_ARCH_TEGRA_DC_H */ diff --git a/arch/arm/include/asm/arch-tegra20/display.h b/arch/arm/include/asm/arch-tegra20/display.h new file mode 100644 index 00000000000..c8709590c75 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/display.h @@ -0,0 +1,152 @@ +/* + * (C) Copyright 2010 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_TEGRA_DISPLAY_H +#define __ASM_ARCH_TEGRA_DISPLAY_H + +#include <asm/arch/dc.h> +#include <fdtdec.h> + +/* This holds information about a window which can be displayed */ +struct disp_ctl_win { + enum win_color_depth_id fmt; /* Color depth/format */ + unsigned bpp; /* Bits per pixel */ + phys_addr_t phys_addr; /* Physical address in memory */ + unsigned x; /* Horizontal address offset (bytes) */ + unsigned y; /* Veritical address offset (bytes) */ + unsigned w; /* Width of source window */ + unsigned h; /* Height of source window */ + unsigned stride; /* Number of bytes per line */ + unsigned out_x; /* Left edge of output window (col) */ + unsigned out_y; /* Top edge of output window (row) */ + unsigned out_w; /* Width of output window in pixels */ + unsigned out_h; /* Height of output window in pixels */ +}; + +#define FDT_LCD_TIMINGS 4 + +enum { + FDT_LCD_TIMING_REF_TO_SYNC, + FDT_LCD_TIMING_SYNC_WIDTH, + FDT_LCD_TIMING_BACK_PORCH, + FDT_LCD_TIMING_FRONT_PORCH, + + FDT_LCD_TIMING_COUNT, +}; + +enum lcd_cache_t { + FDT_LCD_CACHE_OFF = 0, + FDT_LCD_CACHE_WRITE_THROUGH = 1 << 0, + FDT_LCD_CACHE_WRITE_BACK = 1 << 1, + FDT_LCD_CACHE_FLUSH = 1 << 2, + FDT_LCD_CACHE_WRITE_BACK_FLUSH = FDT_LCD_CACHE_WRITE_BACK | + FDT_LCD_CACHE_FLUSH, +}; + +/* Information about the display controller */ +struct fdt_disp_config { + int valid; /* config is valid */ + int width; /* width in pixels */ + int height; /* height in pixels */ + int bpp; /* number of bits per pixel */ + + /* + * log2 of number of bpp, in general, unless it bpp is 24 in which + * case this field holds 24 also! This is a U-Boot thing. + */ + int log2_bpp; + struct disp_ctlr *disp; /* Display controller to use */ + fdt_addr_t frame_buffer; /* Address of frame buffer */ + unsigned pixel_clock; /* Pixel clock in Hz */ + uint horiz_timing[FDT_LCD_TIMING_COUNT]; /* Horizontal timing */ + uint vert_timing[FDT_LCD_TIMING_COUNT]; /* Vertical timing */ + int panel_node; /* node offset of panel information */ +}; + +/* Information about the LCD panel */ +struct fdt_panel_config { + int pwm_channel; /* PWM channel to use for backlight */ + enum lcd_cache_t cache_type; + + struct fdt_gpio_state backlight_en; /* GPIO for backlight enable */ + struct fdt_gpio_state lvds_shutdown; /* GPIO for lvds shutdown */ + struct fdt_gpio_state backlight_vdd; /* GPIO for backlight vdd */ + struct fdt_gpio_state panel_vdd; /* GPIO for panel vdd */ + /* + * Panel required timings + * Timing 1: delay between panel_vdd-rise and data-rise + * Timing 2: delay between data-rise and backlight_vdd-rise + * Timing 3: delay between backlight_vdd and pwm-rise + * Timing 4: delay between pwm-rise and backlight_en-rise + */ + uint panel_timings[FDT_LCD_TIMINGS]; +}; + +/** + * Register a new display based on device tree configuration. + * + * The frame buffer can be positioned by U-Boot or overriden by the fdt. + * You should pass in the U-Boot address here, and check the contents of + * struct fdt_disp_config to see what was actually chosen. + * + * @param blob Device tree blob + * @param default_lcd_base Default address of LCD frame buffer + * @return 0 if ok, -1 on error (unsupported bits per pixel) + */ +int tegra_display_probe(const void *blob, void *default_lcd_base); + +/** + * Return the current display configuration + * + * @return pointer to display configuration, or NULL if there is no valid + * config + */ +struct fdt_disp_config *tegra_display_get_config(void); + +/** + * Perform the next stage of the LCD init if it is time to do so. + * + * LCD init can be time-consuming because of the number of delays we need + * while waiting for the backlight power supply, etc. This function can + * be called at various times during U-Boot operation to advance the + * initialization of the LCD to the next stage if sufficient time has + * passed since the last stage. It keeps track of what stage it is up to + * and the time that it is permitted to move to the next stage. + * + * The final call should have wait=1 to complete the init. + * + * @param blob fdt blob containing LCD information + * @param wait 1 to wait until all init is complete, and then return + * 0 to return immediately, potentially doing nothing if it is + * not yet time for the next init. + */ +int tegra_lcd_check_next_stage(const void *blob, int wait); + +/** + * Set up the maximum LCD size so we can size the frame buffer. + * + * @param blob fdt blob containing LCD information + */ +void tegra_lcd_early_init(const void *blob); + +#endif /*__ASM_ARCH_TEGRA_DISPLAY_H*/ diff --git a/arch/arm/include/asm/arch-tegra20/pinmux.h b/arch/arm/include/asm/arch-tegra20/pinmux.h index 03fa7ca643b..797e158e68a 100644 --- a/arch/arm/include/asm/arch-tegra20/pinmux.h +++ b/arch/arm/include/asm/arch-tegra20/pinmux.h @@ -339,7 +339,7 @@ void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd); void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func); /* Set the complete configuration for a pin group */ -void pinmux_config_pingroup(struct pingroup_config *config); +void pinmux_config_pingroup(const struct pingroup_config *config); void pinmux_set_tristate(enum pmux_pingrp pin, int enable); @@ -349,6 +349,6 @@ void pinmux_set_tristate(enum pmux_pingrp pin, int enable); * @param config List of config items * @param len Number of config items in list */ -void pinmux_config_table(struct pingroup_config *config, int len); +void pinmux_config_table(const struct pingroup_config *config, int len); #endif /* PINMUX_H */ diff --git a/arch/arm/include/asm/arch-tegra20/pwm.h b/arch/arm/include/asm/arch-tegra20/pwm.h new file mode 100644 index 00000000000..9e03837ccbb --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/pwm.h @@ -0,0 +1,75 @@ +/* + * Tegra pulse width frequency modulator definitions + * + * Copyright (c) 2011 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_TEGRA_PWM_H +#define __ASM_ARCH_TEGRA_PWM_H + +/* This is a single PWM channel */ +struct pwm_ctlr { + uint control; /* Control register */ + uint reserved[3]; /* Space space */ +}; + +#define PWM_NUM_CHANNELS 4 + +/* PWM_CONTROLLER_PWM_CSR_0/1/2/3_0 */ +#define PWM_ENABLE_SHIFT 31 +#define PWM_ENABLE_MASK (0x1 << PWM_ENABLE_SHIFT) + +#define PWM_WIDTH_SHIFT 16 +#define PWM_WIDTH_MASK (0x7FFF << PWM_WIDTH_SHIFT) + +#define PWM_DIVIDER_SHIFT 0 +#define PWM_DIVIDER_MASK (0x1FFF << PWM_DIVIDER_SHIFT) + +/** + * Program the PWM with the given parameters. + * + * @param channel PWM channel to update + * @param rate Clock rate to use for PWM + * @param pulse_width high pulse width: 0=always low, 1=1/256 pulse high, + * n = n/256 pulse high + * @param freq_divider frequency divider value (1 to use rate as is) + */ +void pwm_enable(unsigned channel, int rate, int pulse_width, int freq_divider); + +/** + * Request a pwm channel as referenced by a device tree node. + * + * This channel can then be passed to pwm_enable(). + * + * @param blob Device tree blob + * @param node Node containing reference to pwm + * @param prop_name Property name of pwm reference + * @return channel number, if ok, else -1 + */ +int pwm_request(const void *blob, int node, const char *prop_name); + +/** + * Set up the pwm controller, by looking it up in the fdt. + * + * @return 0 if ok, -1 if the device tree node was not found or invalid. + */ +int pwm_init(const void *blob); + +#endif /* __ASM_ARCH_TEGRA_PWM_H */ diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 2b28a261ba0..78ca8e0a6dc 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -75,6 +75,37 @@ static inline void set_cr(unsigned int val) isb(); } +/* options available for data cache on each page */ +enum dcache_option { + DCACHE_OFF = 0x12, + DCACHE_WRITETHROUGH = 0x1a, + DCACHE_WRITEBACK = 0x1e, +}; + +/* Size of an MMU section */ +enum { + MMU_SECTION_SHIFT = 20, + MMU_SECTION_SIZE = 1 << MMU_SECTION_SHIFT, +}; + +/** + * Change the cache settings for a region. + * + * \param start start address of memory region to change + * \param size size of memory region to change + * \param option dcache option to select + */ +void mmu_set_region_dcache_behaviour(u32 start, int size, + enum dcache_option option); + +/** + * Register an update to the page tables, and flush the TLB + * + * \param start start address of update in page table + * \param stop stop address of update in page table + */ +void mmu_page_table_flush(unsigned long start, unsigned long stop); + #endif /* __ASSEMBLY__ */ #define arch_align_stack(x) (x) diff --git a/arch/arm/lib/cache-cp15.c b/arch/arm/lib/cache-cp15.c index 939de10e039..6edf815d4d7 100644 --- a/arch/arm/lib/cache-cp15.c +++ b/arch/arm/lib/cache-cp15.c @@ -26,12 +26,6 @@ #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) -#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH) -#define CACHE_SETUP 0x1a -#else -#define CACHE_SETUP 0x1e -#endif - DECLARE_GLOBAL_DATA_PTR; void __arm_init_before_mmu(void) @@ -50,9 +44,41 @@ static void cp_delay (void) asm volatile("" : : : "memory"); } -static inline void dram_bank_mmu_setup(int bank) +void set_section_dcache(int section, enum dcache_option option) { u32 *page_table = (u32 *)gd->tlb_addr; + u32 value; + + value = (section << MMU_SECTION_SHIFT) | (3 << 10); + value |= option; + page_table[section] = value; +} + +void __mmu_page_table_flush(unsigned long start, unsigned long stop) +{ + debug("%s: Warning: not implemented\n", __func__); +} + +void mmu_page_table_flush(unsigned long start, unsigned long stop) + __attribute__((weak, alias("__mmu_page_table_flush"))); + +void mmu_set_region_dcache_behaviour(u32 start, int size, + enum dcache_option option) +{ + u32 *page_table = (u32 *)gd->tlb_addr; + u32 upto, end; + + end = ALIGN(start + size, MMU_SECTION_SIZE) >> MMU_SECTION_SHIFT; + start = start >> MMU_SECTION_SHIFT; + debug("%s: start=%x, size=%x, option=%d\n", __func__, start, size, + option); + for (upto = start; upto < end; upto++) + set_section_dcache(upto, option); + mmu_page_table_flush((u32)&page_table[start], (u32)&page_table[end]); +} + +static inline void dram_bank_mmu_setup(int bank) +{ bd_t *bd = gd->bd; int i; @@ -60,21 +86,24 @@ static inline void dram_bank_mmu_setup(int bank) for (i = bd->bi_dram[bank].start >> 20; i < (bd->bi_dram[bank].start + bd->bi_dram[bank].size) >> 20; i++) { - page_table[i] = i << 20 | (3 << 10) | CACHE_SETUP; +#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH) + set_section_dcache(i, DCACHE_WRITETHROUGH); +#else + set_section_dcache(i, DCACHE_WRITEBACK); +#endif } } /* to activate the MMU we need to set up virtual memory: use 1M areas */ static inline void mmu_setup(void) { - u32 *page_table = (u32 *)gd->tlb_addr; int i; u32 reg; arm_init_before_mmu(); /* Set up an identity-mapping for all 4GB, rw for everyone */ for (i = 0; i < 4096; i++) - page_table[i] = i << 20 | (3 << 10) | 0x12; + set_section_dcache(i, DCACHE_OFF); for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { dram_bank_mmu_setup(i); @@ -82,7 +111,7 @@ static inline void mmu_setup(void) /* Copy the page table address to cp15 */ asm volatile("mcr p15, 0, %0, c2, c0, 0" - : : "r" (page_table) : "memory"); + : : "r" (gd->tlb_addr) : "memory"); /* Set the access control to all-supervisor */ asm volatile("mcr p15, 0, %0, c3, c0, 0" : : "r" (~0)); diff --git a/board/compal/paz00/paz00.c b/board/compal/paz00/paz00.c index 0725989de06..6492d4168e1 100644 --- a/board/compal/paz00/paz00.c +++ b/board/compal/paz00/paz00.c @@ -61,9 +61,8 @@ int board_mmc_init(bd_t *bd) pin_mux_mmc(); debug("board_mmc_init: init eMMC\n"); - /* init dev 0, eMMC chip, with 4-bit bus */ - /* The board has an 8-bit bus, but 8-bit doesn't work yet */ - tegra_mmc_init(0, 4, -1, -1); + /* init dev 0, eMMC chip, with 8-bit bus */ + tegra_mmc_init(0, 8, -1, -1); debug("board_mmc_init: init SD slot\n"); /* init dev 3, SD slot, with 4-bit bus */ diff --git a/board/compulab/dts/tegra20-trimslice.dts b/board/compulab/dts/tegra20-trimslice.dts index db79e7796d0..4450674a759 100644 --- a/board/compulab/dts/tegra20-trimslice.dts +++ b/board/compulab/dts/tegra20-trimslice.dts @@ -8,6 +8,7 @@ aliases { usb0 = "/usb@c5008000"; + usb1 = "/usb@c5000000"; }; memory { @@ -48,7 +49,7 @@ }; usb@c5000000 { - status = "disabled"; + nvidia,vbus-gpio = <&gpio 170 0>; /* PV2 */ }; usb@c5004000 { diff --git a/board/compulab/trimslice/trimslice.c b/board/compulab/trimslice/trimslice.c index 9ef66fd8653..8f4dd09faa3 100644 --- a/board/compulab/trimslice/trimslice.c +++ b/board/compulab/trimslice/trimslice.c @@ -34,6 +34,14 @@ #include <mmc.h> #endif +void pin_mux_usb(void) +{ + /* + * USB1 internal/external mux GPIO, which masquerades as a VBUS GPIO + * in the current device tree. + */ + pinmux_tristate_disable(PINGRP_UAC); +} void pin_mux_spi(void) { diff --git a/board/freescale/mx25pdk/mx25pdk.c b/board/freescale/mx25pdk/mx25pdk.c index 4a8352fb3d2..72fa6bc8260 100644 --- a/board/freescale/mx25pdk/mx25pdk.c +++ b/board/freescale/mx25pdk/mx25pdk.c @@ -19,12 +19,71 @@ #include <common.h> #include <asm/io.h> +#include <asm/gpio.h> #include <asm/arch/imx-regs.h> #include <asm/arch/imx25-pinmux.h> #include <asm/arch/sys_proto.h> +#include <asm/arch/clock.h> +#include <mmc.h> +#include <fsl_esdhc.h> +#include <i2c.h> +#include <pmic.h> +#include <fsl_pmic.h> +#include <mc34704.h> + +#define FEC_RESET_B IMX_GPIO_NR(2, 3) +#define FEC_ENABLE_B IMX_GPIO_NR(4, 8) +#define CARD_DETECT IMX_GPIO_NR(2, 1) DECLARE_GLOBAL_DATA_PTR; +#ifdef CONFIG_FSL_ESDHC +struct fsl_esdhc_cfg esdhc_cfg[1] = { + {IMX_MMC_SDHC1_BASE}, +}; +#endif + +static void mx25pdk_fec_init(void) +{ + struct iomuxc_mux_ctl *muxctl; + struct iomuxc_pad_ctl *padctl; + u32 gpio_mux_mode = MX25_PIN_MUX_MODE(5); + u32 gpio_mux_mode0_sion = MX25_PIN_MUX_MODE(0) | MX25_PIN_MUX_SION; + + /* FEC pin init is generic */ + mx25_fec_init_pins(); + + muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE; + padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE; + /* + * Set up FEC_RESET_B and FEC_ENABLE_B + * + * FEC_RESET_B: gpio2_3 is ALT 5 mode of pin D12 + * FEC_ENABLE_B: gpio4_8 is ALT 5 mode of pin A17 + */ + writel(gpio_mux_mode, &muxctl->pad_d12); + writel(gpio_mux_mode, &muxctl->pad_a17); + + writel(0x0, &padctl->pad_d12); + writel(0x0, &padctl->pad_a17); + + /* Assert RESET and ENABLE low */ + gpio_direction_output(FEC_RESET_B, 0); + gpio_direction_output(FEC_ENABLE_B, 0); + + udelay(10); + + /* Deassert RESET and ENABLE */ + gpio_set_value(FEC_RESET_B, 1); + gpio_set_value(FEC_ENABLE_B, 1); + + /* Setup I2C pins so that PMIC can turn on PHY supply */ + writel(gpio_mux_mode0_sion, &muxctl->pad_i2c1_clk); + writel(gpio_mux_mode0_sion, &muxctl->pad_i2c1_dat); + writel(0x1E8, &padctl->pad_i2c1_clk); + writel(0x1E8, &padctl->pad_i2c1_dat); +} + int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ @@ -48,6 +107,61 @@ int board_init(void) return 0; } +int board_late_init(void) +{ + struct pmic *p; + + mx25pdk_fec_init(); + + pmic_init(); + p = get_pmic(); + /* Turn on Ethernet PHY supply */ + pmic_reg_write(p, MC34704_GENERAL2_REG, ONOFFE); + + return 0; +} + +#ifdef CONFIG_FSL_ESDHC +int board_mmc_getcd(struct mmc *mmc) +{ + struct iomuxc_mux_ctl *muxctl; + struct iomuxc_pad_ctl *padctl; + u32 gpio_mux_mode = MX25_PIN_MUX_MODE(5); + + /* + * Set up the Card Detect pin. + * + * SD1_GPIO_CD: gpio2_1 is ALT 5 mode of pin A15 + * + */ + muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE; + padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE; + + writel(gpio_mux_mode, &muxctl->pad_a15); + writel(0x0, &padctl->pad_a15); + + gpio_direction_input(CARD_DETECT); + return !gpio_get_value(CARD_DETECT); +} + +int board_mmc_init(bd_t *bis) +{ + struct iomuxc_mux_ctl *muxctl; + u32 sdhc1_mux_mode = MX25_PIN_MUX_MODE(0) | MX25_PIN_MUX_SION; + + muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE; + writel(sdhc1_mux_mode, &muxctl->pad_sd1_cmd); + writel(sdhc1_mux_mode, &muxctl->pad_sd1_clk); + writel(sdhc1_mux_mode, &muxctl->pad_sd1_data0); + writel(sdhc1_mux_mode, &muxctl->pad_sd1_data1); + writel(sdhc1_mux_mode, &muxctl->pad_sd1_data2); + writel(sdhc1_mux_mode, &muxctl->pad_sd1_data3); + + esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK); + return fsl_esdhc_initialize(bis, &esdhc_cfg[0]); +} +#endif + int checkboard(void) { puts("Board: MX25PDK\n"); diff --git a/board/freescale/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds index 29ad0e6e79c..52677299e88 100644 --- a/board/freescale/mx31ads/u-boot.lds +++ b/board/freescale/mx31ads/u-boot.lds @@ -65,6 +65,8 @@ SECTIONS . = ALIGN(4); + __image_copy_end = .; + .rel.dyn : { __rel_dyn_start = .; *(.rel*) diff --git a/board/freescale/mx35pdk/lowlevel_init.S b/board/freescale/mx35pdk/lowlevel_init.S index 75bb9586196..da8b6f3a4e2 100644 --- a/board/freescale/mx35pdk/lowlevel_init.S +++ b/board/freescale/mx35pdk/lowlevel_init.S @@ -94,6 +94,10 @@ orr r1, r1, #0x00000C00 orr r1, r1, #0x00000003 str r1, [r0, #CLKCTL_CGR1] + + ldr r1, [r0, #CLKCTL_CGR2] + orr r1, r1, #0x00C00000 + str r1, [r0, #CLKCTL_CGR2] .endm .macro setup_sdram diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c index c835b0edeb5..2aa000f238e 100644 --- a/board/freescale/mx35pdk/mx35pdk.c +++ b/board/freescale/mx35pdk/mx35pdk.c @@ -98,6 +98,26 @@ static void setup_iomux_spi(void) mxc_request_iomux(MX35_PIN_CSPI1_SCLK, MUX_CONFIG_SION); } +static void setup_iomux_usbotg(void) +{ + int in_pad, out_pad; + + /* Set up pins for USBOTG. */ + mxc_request_iomux(MX35_PIN_USBOTG_PWR, + MUX_CONFIG_SION | MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_USBOTG_OC, + MUX_CONFIG_SION | MUX_CONFIG_FUNC); + + in_pad = PAD_CTL_DRV_3_3V | PAD_CTL_HYS_SCHMITZ | PAD_CTL_PKE_ENABLE | + PAD_CTL_PUE_PUD | PAD_CTL_100K_PD | PAD_CTL_ODE_CMOS | + PAD_CTL_DRV_NORMAL | PAD_CTL_SRE_SLOW; + out_pad = PAD_CTL_DRV_3_3V | PAD_CTL_HYS_CMOS | PAD_CTL_PKE_NONE | + PAD_CTL_ODE_CMOS | PAD_CTL_DRV_NORMAL | PAD_CTL_SRE_SLOW; + + mxc_iomux_set_pad(MX35_PIN_USBOTG_PWR, out_pad); + mxc_iomux_set_pad(MX35_PIN_USBOTG_OC, in_pad); +} + static void setup_iomux_fec(void) { int pad; @@ -189,6 +209,7 @@ int board_early_init_f(void) __raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr); setup_iomux_i2c(); + setup_iomux_usbotg(); setup_iomux_fec(); setup_iomux_spi(); diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index 2c7cd0d401f..76ec6876e21 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -26,10 +26,12 @@ #include <linux/compiler.h> #include <asm/io.h> #include <asm/arch/clock.h> +#include <asm/arch/display.h> #include <asm/arch/emc.h> #include <asm/arch/funcmux.h> #include <asm/arch/pinmux.h> #include <asm/arch/pmu.h> +#include <asm/arch/pwm.h> #include <asm/arch/tegra.h> #include <asm/arch/usb.h> #include <asm/arch-tegra/board.h> @@ -119,6 +121,13 @@ int board_init(void) pin_mux_spi(); spi_init(); #endif +#ifdef CONFIG_PWM_TEGRA + if (pwm_init(gd->fdt_blob)) + debug("%s: Failed to init pwm\n", __func__); +#endif +#ifdef CONFIG_LCD + tegra_lcd_check_next_stage(gd->fdt_blob, 0); +#endif /* boot param addr */ gd->bd->bi_boot_params = (NV_PA_SDRAM_BASE + 0x100); @@ -144,6 +153,9 @@ int board_init(void) pin_mux_usb(); board_usb_init(gd->fdt_blob); #endif +#ifdef CONFIG_LCD + tegra_lcd_check_next_stage(gd->fdt_blob, 0); +#endif #ifdef CONFIG_TEGRA_NAND pin_mux_nand(); @@ -174,7 +186,19 @@ int board_early_init_f(void) /* Initialize periph GPIOs */ gpio_early_init(); gpio_early_init_uart(); +#ifdef CONFIG_LCD + tegra_lcd_early_init(gd->fdt_blob); +#endif return 0; } #endif /* EARLY_INIT */ + +int board_late_init(void) +{ +#ifdef CONFIG_LCD + /* Make sure we finish initing the LCD */ + tegra_lcd_check_next_stage(gd->fdt_blob, 1); +#endif + return 0; +} diff --git a/board/nvidia/dts/tegra20-seaboard.dts b/board/nvidia/dts/tegra20-seaboard.dts index 25a63a05d0c..dd98ca48e9f 100644 --- a/board/nvidia/dts/tegra20-seaboard.dts +++ b/board/nvidia/dts/tegra20-seaboard.dts @@ -163,4 +163,37 @@ compatible = "hynix,hy27uf4g2b", "nand-flash"; }; }; + + host1x { + status = "okay"; + dc@54200000 { + status = "okay"; + rgb { + status = "okay"; + nvidia,panel = <&lcd_panel>; + }; + }; + }; + + lcd_panel: panel { + /* Seaboard has 1366x768 */ + clock = <70600000>; + xres = <1366>; + yres = <768>; + left-margin = <58>; + right-margin = <58>; + hsync-len = <58>; + lower-margin = <4>; + upper-margin = <4>; + vsync-len = <4>; + hsync-active-high; + nvidia,bits-per-pixel = <16>; + nvidia,pwm = <&pwm 2 0>; + nvidia,backlight-enable-gpios = <&gpio 28 0>; /* PD4 */ + nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */ + nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */ + nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */ + nvidia,panel-timings = <400 4 203 17 15>; + }; + }; diff --git a/board/nvidia/harmony/harmony.c b/board/nvidia/harmony/harmony.c index c7590ac6cff..93430edd3bd 100644 --- a/board/nvidia/harmony/harmony.c +++ b/board/nvidia/harmony/harmony.c @@ -64,9 +64,8 @@ int board_mmc_init(bd_t *bd) pin_mux_mmc(); debug("board_mmc_init: init SD slot J26\n"); - /* init dev 0, SD slot J26, with 4-bit bus */ - /* The board has an 8-bit bus, but 8-bit doesn't work yet */ - tegra_mmc_init(0, 4, GPIO_PI6, GPIO_PH2); + /* init dev 0, SD slot J26, with 8-bit bus */ + tegra_mmc_init(0, 8, GPIO_PI6, GPIO_PH2); debug("board_mmc_init: init SD slot J5\n"); /* init dev 2, SD slot J5, with 4-bit bus */ diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c index c412c077da0..3e33da0afc3 100644 --- a/board/nvidia/seaboard/seaboard.c +++ b/board/nvidia/seaboard/seaboard.c @@ -71,9 +71,8 @@ int board_mmc_init(bd_t *bd) pin_mux_mmc(); debug("board_mmc_init: init eMMC\n"); - /* init dev 0, eMMC chip, with 4-bit bus */ - /* The board has an 8-bit bus, but 8-bit doesn't work yet */ - tegra_mmc_init(0, 4, -1, -1); + /* init dev 0, eMMC chip, with 8-bit bus */ + tegra_mmc_init(0, 8, -1, -1); debug("board_mmc_init: init SD slot\n"); /* init dev 1, SD slot, with 4-bit bus */ diff --git a/board/samsung/smdk5250/Makefile b/board/samsung/smdk5250/Makefile index 1474fa8a15a..47c6a5a46b5 100644 --- a/board/samsung/smdk5250/Makefile +++ b/board/samsung/smdk5250/Makefile @@ -36,7 +36,7 @@ COBJS += smdk5250.o endif ifdef CONFIG_SPL_BUILD -COBJS += mmc_boot.o +COBJS += spl_boot.o endif SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c index a5816e445c8..4c50342e5cd 100644 --- a/board/samsung/smdk5250/smdk5250.c +++ b/board/samsung/smdk5250/smdk5250.c @@ -24,11 +24,13 @@ #include <asm/io.h> #include <i2c.h> #include <netdev.h> +#include <spi.h> #include <asm/arch/cpu.h> #include <asm/arch/gpio.h> #include <asm/arch/mmc.h> #include <asm/arch/pinmux.h> #include <asm/arch/sromc.h> +#include <pmic.h> DECLARE_GLOBAL_DATA_PTR; @@ -63,6 +65,12 @@ static int smc9115_pre_init(void) int board_init(void) { gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL); +#if defined(CONFIG_PMIC) + pmic_init(); +#endif +#ifdef CONFIG_EXYNOS_SPI + spi_init(); +#endif return 0; } diff --git a/board/samsung/smdk5250/mmc_boot.c b/board/samsung/smdk5250/spl_boot.c index 449a919d5f2..d8f3c1e1848 100644 --- a/board/samsung/smdk5250/mmc_boot.c +++ b/board/samsung/smdk5250/spl_boot.c @@ -23,6 +23,16 @@ #include<common.h> #include<config.h> +enum boot_mode { + BOOT_MODE_MMC = 4, + BOOT_MODE_SERIAL = 20, + /* Boot based on Operating Mode pin settings */ + BOOT_MODE_OM = 32, + BOOT_MODE_USB, /* Boot using USB download */ +}; + + typedef u32 (*spi_copy_func_t)(u32 offset, u32 nblock, u32 dst); + /* * Copy U-boot from mmc to RAM: * COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains @@ -30,9 +40,26 @@ */ void copy_uboot_to_ram(void) { - u32 (*copy_bl2)(u32, u32, u32) = (void *) *(u32 *)COPY_BL2_FNPTR_ADDR; + spi_copy_func_t spi_copy; + enum boot_mode bootmode; + u32 (*copy_bl2)(u32, u32, u32); + + bootmode = readl(EXYNOS5_POWER_BASE) & OM_STAT; - copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE); + switch (bootmode) { + case BOOT_MODE_SERIAL: + spi_copy = *(spi_copy_func_t *)EXYNOS_COPY_SPI_FNPTR_ADDR; + spi_copy(SPI_FLASH_UBOOT_POS, CONFIG_BL2_SIZE, + CONFIG_SYS_TEXT_BASE); + break; + case BOOT_MODE_MMC: + copy_bl2 = (void *) *(u32 *)COPY_BL2_FNPTR_ADDR; + copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT, + CONFIG_SYS_TEXT_BASE); + break; + default: + break; + } } void board_init_f(unsigned long bootflag) diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c index e5401909847..47240294244 100644 --- a/board/samsung/trats/trats.c +++ b/board/samsung/trats/trats.c @@ -29,6 +29,7 @@ #include <asm/arch/cpu.h> #include <asm/arch/gpio.h> #include <asm/arch/mmc.h> +#include <asm/arch/pinmux.h> #include <asm/arch/clock.h> #include <asm/arch/clk.h> #include <asm/arch/mipi_dsim.h> @@ -361,7 +362,9 @@ int power_init_board(void) int dram_init(void) { gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) + - get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE) + + get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE) + + get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE); return 0; } @@ -372,6 +375,10 @@ void dram_init_banksize(void) gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; gd->bd->bi_dram[1].start = PHYS_SDRAM_2; gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; + gd->bd->bi_dram[2].start = PHYS_SDRAM_3; + gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; + gd->bd->bi_dram[3].start = PHYS_SDRAM_4; + gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; } static unsigned int get_hw_revision(void) @@ -419,54 +426,22 @@ int board_mmc_init(bd_t *bis) { struct exynos4_gpio_part2 *gpio = (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2(); - int i, err; + int err; /* eMMC_EN: SD_0_CDn: GPK0[2] Output High */ s5p_gpio_direction_output(&gpio->k0, 2, 1); s5p_gpio_set_pull(&gpio->k0, 2, GPIO_PULL_NONE); /* - * eMMC GPIO: - * SDR 8-bit@48MHz at MMC0 - * GPK0[0] SD_0_CLK(2) - * GPK0[1] SD_0_CMD(2) - * GPK0[2] SD_0_CDn -> Not used - * GPK0[3:6] SD_0_DATA[0:3](2) - * GPK1[3:6] SD_0_DATA[0:3](3) - * - * DDR 4-bit@26MHz at MMC4 - * GPK0[0] SD_4_CLK(3) - * GPK0[1] SD_4_CMD(3) - * GPK0[2] SD_4_CDn -> Not used - * GPK0[3:6] SD_4_DATA[0:3](3) - * GPK1[3:6] SD_4_DATA[4:7](4) - */ - for (i = 0; i < 7; i++) { - if (i == 2) - continue; - /* GPK0[0:6] special function 2 */ - s5p_gpio_cfg_pin(&gpio->k0, i, 0x2); - /* GPK0[0:6] pull disable */ - s5p_gpio_set_pull(&gpio->k0, i, GPIO_PULL_NONE); - /* GPK0[0:6] drv 4x */ - s5p_gpio_set_drv(&gpio->k0, i, GPIO_DRV_4X); - } - - for (i = 3; i < 7; i++) { - /* GPK1[3:6] special function 3 */ - s5p_gpio_cfg_pin(&gpio->k1, i, 0x3); - /* GPK1[3:6] pull disable */ - s5p_gpio_set_pull(&gpio->k1, i, GPIO_PULL_NONE); - /* GPK1[3:6] drv 4x */ - s5p_gpio_set_drv(&gpio->k1, i, GPIO_DRV_4X); - } - - /* * MMC device init * mmc0 : eMMC (8-bit buswidth) * mmc2 : SD card (4-bit buswidth) */ - err = s5p_mmc_init(0, 8); + err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE); + if (err) + debug("SDMMC0 not configured\n"); + else + err = s5p_mmc_init(0, 8); /* T-flash detect */ s5p_gpio_cfg_pin(&gpio->x3, 4, 0xf); @@ -477,24 +452,11 @@ int board_mmc_init(bd_t *bis) * GPX3[4] T-flash detect pin */ if (!s5p_gpio_get_value(&gpio->x3, 4)) { - /* - * SD card GPIO: - * GPK2[0] SD_2_CLK(2) - * GPK2[1] SD_2_CMD(2) - * GPK2[2] SD_2_CDn -> Not used - * GPK2[3:6] SD_2_DATA[0:3](2) - */ - for (i = 0; i < 7; i++) { - if (i == 2) - continue; - /* GPK2[0:6] special function 2 */ - s5p_gpio_cfg_pin(&gpio->k2, i, 0x2); - /* GPK2[0:6] pull disable */ - s5p_gpio_set_pull(&gpio->k2, i, GPIO_PULL_NONE); - /* GPK2[0:6] drv 4x */ - s5p_gpio_set_drv(&gpio->k2, i, GPIO_DRV_4X); - } - err = s5p_mmc_init(2, 4); + err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE); + if (err) + debug("SDMMC2 not configured\n"); + else + err = s5p_mmc_init(2, 4); } return err; @@ -629,6 +591,10 @@ static void board_power_init(void) writel(0, (unsigned int)&pwr->lcd1_configuration); writel(0, (unsigned int)&pwr->gps_configuration); writel(0, (unsigned int)&pwr->gps_alive_configuration); + + /* It is necessary to power down core 1 */ + /* to successfully boot CPU1 in kernel */ + writel(0, (unsigned int)&pwr->arm_core1_configuration); } static void board_uart_init(void) diff --git a/board/samsung/universal_c210/Makefile b/board/samsung/universal_c210/Makefile index bfec08fa8ea..587cc1b8c70 100644 --- a/board/samsung/universal_c210/Makefile +++ b/board/samsung/universal_c210/Makefile @@ -26,7 +26,6 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o COBJS-y := universal.o onenand.o -SOBJS := lowlevel_init.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/samsung/universal_c210/lowlevel_init.S b/board/samsung/universal_c210/lowlevel_init.S deleted file mode 100644 index dc7f69ea447..00000000000 --- a/board/samsung/universal_c210/lowlevel_init.S +++ /dev/null @@ -1,395 +0,0 @@ -/* - * Lowlevel setup for universal board based on EXYNOS4210 - * - * Copyright (C) 2010 Samsung Electronics - * Kyungmin Park <kyungmin.park@samsung.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <version.h> -#include <asm/arch/cpu.h> -#include <asm/arch/clock.h> - -/* - * Register usages: - * - * r5 has zero always - * r7 has GPIO part1 base 0x11400000 - * r6 has GPIO part2 base 0x11000000 - */ - - .globl lowlevel_init -lowlevel_init: - mov r11, lr - - /* r5 has always zero */ - mov r5, #0 - - ldr r7, =EXYNOS4_GPIO_PART1_BASE - ldr r6, =EXYNOS4_GPIO_PART2_BASE - - /* System Timer */ - ldr r0, =EXYNOS4_SYSTIMER_BASE - ldr r1, =0x5000 - str r1, [r0, #0x0] - ldr r1, =0xffffffff - str r1, [r0, #0x8] - ldr r1, =0x49 - str r1, [r0, #0x4] - - /* PMIC manual reset */ - /* nPOWER: XEINT_23: GPX2[7] */ - add r0, r6, #0xC40 @ EXYNOS4_GPIO_X2_OFFSET - ldr r1, [r0, #0x0] - bic r1, r1, #(0xf << 28) @ 28 = 7 * 4-bit - orr r1, r1, #(0x1 << 28) @ Output - str r1, [r0, #0x0] - - ldr r1, [r0, #0x4] - orr r1, r1, #(1 << 7) @ 7 = 7 * 1-bit - str r1, [r0, #0x4] - - /* init system clock */ - bl system_clock_init - - /* Disable Watchdog */ - ldr r0, =EXYNOS4_WATCHDOG_BASE @0x10060000 - str r5, [r0] - - /* UART */ - bl uart_asm_init - - /* PMU init */ - bl system_power_init - - bl tzpc_init - - mov lr, r11 - mov pc, lr - nop - nop - nop - -/* - * uart_asm_init: Initialize UART's pins - */ -uart_asm_init: - /* - * setup UART0-UART4 GPIOs (part1) - * GPA1CON[3] = I2C_3_SCL (3) - * GPA1CON[2] = I2C_3_SDA (3) - */ - mov r0, r7 - ldr r1, =0x22222222 - str r1, [r0, #0x00] @ EXYNOS4_GPIO_A0_OFFSET - ldr r1, =0x00223322 - str r1, [r0, #0x20] @ EXYNOS4_GPIO_A1_OFFSET - - /* UART_SEL GPY4[7] (part2) at EXYNOS4 */ - add r0, r6, #0x1A0 @ EXYNOS4_GPIO_Y4_OFFSET - ldr r1, [r0, #0x0] - bic r1, r1, #(0xf << 28) @ 28 = 7 * 4-bit - orr r1, r1, #(0x1 << 28) - str r1, [r0, #0x0] - - ldr r1, [r0, #0x8] - bic r1, r1, #(0x3 << 14) @ 14 = 7 * 2-bit - orr r1, r1, #(0x3 << 14) @ Pull-up enabled - str r1, [r0, #0x8] - - ldr r1, [r0, #0x4] - orr r1, r1, #(1 << 7) @ 7 = 7 * 1-bit - str r1, [r0, #0x4] - - mov pc, lr - nop - nop - nop - -system_clock_init: - ldr r0, =EXYNOS4_CLOCK_BASE - - /* APLL(1), MPLL(1), CORE(0), HPM(0) */ - ldr r1, =0x0101 - ldr r2, =0x14200 @ CLK_SRC_CPU - str r1, [r0, r2] - - /* wait ?us */ - mov r1, #0x10000 -1: subs r1, r1, #1 - bne 1b - - /* - * CLK_SRC_TOP0 - * MUX_ONENAND_SEL[28] 0: DOUT133, 1: DOUT166 - * MUX_VPLL_SEL[8] 0: FINPLL, 1: FOUTVPLL - * MUX_EPLL_SEL[4] 0: FINPLL, 1: FOUTEPLL - */ - ldr r1, =0x10000110 - ldr r2, =0x0C210 @ CLK_SRC_TOP - str r1, [r0, r2] - - /* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */ - ldr r1, =0x0066666 - ldr r2, =0x0C240 @ CLK_SRC_FSYS - str r1, [r0, r2] - /* UART[0:5], PWM: SCLKMPLL(6) */ - ldr r1, =0x6666666 - ldr r2, =0x0C250 @ CLK_SRC_PERIL0_OFFSET - str r1, [r0, r2] - - /* CPU0: CORE, COREM0, COREM1, PERI, ATB, PCLK_DBG, APLL */ - ldr r1, =0x0133730 - ldr r2, =0x14500 @ CLK_DIV_CPU0 - str r1, [r0, r2] - /* CPU1: COPY, HPM */ - ldr r1, =0x03 - ldr r2, =0x14504 @ CLK_DIV_CPU1 - str r1, [r0, r2] - /* DMC0: ACP, ACP_PCLK, DPHY, DMC, DMCD, DMCP, COPY2 CORE_TIMER */ - ldr r1, =0x13111113 - ldr r2, =0x10500 @ CLK_DIV_DMC0 - str r1, [r0, r2] - /* DMC1: PWI, DVSEM, DPM */ - ldr r1, =0x01010100 - ldr r2, =0x10504 @ CLK_DIV_DMC1 - str r1, [r0, r2] - /* LEFTBUS: GDL, GPL */ - ldr r1, =0x13 - ldr r2, =0x04500 @ CLK_DIV_LEFTBUS - str r1, [r0, r2] - /* RIGHHTBUS: GDR, GPR */ - ldr r1, =0x13 - ldr r2, =0x08500 @ CLK_DIV_RIGHTBUS - str r1, [r0, r2] - /* - * CLK_DIV_TOP - * ONENAND_RATIOD[18:16]: 0 SCLK_ONENAND = MOUTONENAND / (n + 1) - * ACLK_200, ACLK_100, ACLK_160, ACLK_133, - */ - ldr r1, =0x00005473 - ldr r2, =0x0C510 @ CLK_DIV_TOP - str r1, [r0, r2] - /* MMC[0:1] */ - ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */ - ldr r2, =0x0C544 @ CLK_DIV_FSYS1 - str r1, [r0, r2] - /* MMC[2:3] */ - ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */ - ldr r2, =0x0C548 @ CLK_DIV_FSYS2 - str r1, [r0, r2] - /* MMC4 */ - ldr r1, =0x000f /* 800(MPLL) / (15 + 1) */ - ldr r2, =0x0C54C @ CLK_DIV_FSYS3 - str r1, [r0, r2] - /* UART[0:5] */ - ldr r1, =0x774777 - ldr r2, =0x0C550 @ CLK_DIV_PERIL0 - str r1, [r0, r2] - /* SLIMBUS: ???, PWM */ - ldr r1, =0x8 - ldr r2, =0x0C55C @ CLK_DIV_PERIL3 - str r1, [r0, r2] - - /* PLL Setting */ - ldr r1, =0x1C20 - ldr r2, =0x14000 @ APLL_LOCK - str r1, [r0, r2] - ldr r2, =0x14008 @ MPLL_LOCK - str r1, [r0, r2] - ldr r2, =0x0C010 @ EPLL_LOCK - str r1, [r0, r2] - ldr r2, =0x0C020 @ VPLL_LOCK - str r1, [r0, r2] - - /* APLL */ - ldr r1, =0x8000001c - ldr r2, =0x14104 @ APLL_CON1 - str r1, [r0, r2] - ldr r1, =0x80c80601 @ 800MHz - ldr r2, =0x14100 @ APLL_CON0 - str r1, [r0, r2] - /* MPLL */ - ldr r1, =0x8000001C - ldr r2, =0x1410C @ MPLL_CON1 - str r1, [r0, r2] - ldr r1, =0x80c80601 @ 800MHz - ldr r2, =0x14108 @ MPLL_CON0 - str r1, [r0, r2] - /* EPLL */ - ldr r1, =0x0 - ldr r2, =0x0C114 @ EPLL_CON1 - str r1, [r0, r2] - ldr r1, =0x80300302 @ 96MHz - ldr r2, =0x0C110 @ EPLL_CON0 - str r1, [r0, r2] - /* VPLL */ - ldr r1, =0x11000400 - ldr r2, =0x0C124 @ VPLL_CON1 - str r1, [r0, r2] - ldr r1, =0x80350302 @ 108MHz - ldr r2, =0x0C120 @ VPLL_CON0 - str r1, [r0, r2] - - /* - * SMMUJPEG[11], JPEG[6], CSIS1[5] : 0111 1001 - * Turn off all - */ - ldr r1, =0xFFF80000 - ldr r2, =0x0C920 @ CLK_GATE_IP_CAM - str r1, [r0, r2] - - /* Turn off all */ - ldr r1, =0xFFFFFFC0 - ldr r2, =0x0C924 @ CLK_GATE_IP_VP - str r1, [r0, r2] - - /* Turn off all */ - ldr r1, =0xFFFFFFE0 - ldr r2, =0x0C928 @ CLK_GATE_IP_MFC - str r1, [r0, r2] - - /* Turn off all */ - ldr r1, =0xFFFFFFFC - ldr r2, =0x0C92C @ CLK_GATE_IP_G3D - str r1, [r0, r2] - - /* Turn off all */ - ldr r1, =0xFFFFFC00 - ldr r2, =0x0C930 @ CLK_GATE_IP_IMAGE - str r1, [r0, r2] - - /* DSIM0[3], MDNIE0[2], MIE0[1] : 0001 */ - ldr r1, =0xFFFFFFF1 - ldr r2, =0x0C934 @ CLK_GATE_IP_LCD0 - str r1, [r0, r2] - - /* Turn off all */ - ldr r1, =0xFFFFFFC0 - ldr r2, =0x0C938 @ CLK_GATE_IP_LCD1 - str r1, [r0, r2] - - /* - * SMMUPCIE[18], NFCON[16] : 1111 1010 - * PCIE[14], SATA[10], SDMMC43[9:8] : 1011 1000 - * SDMMC1[6], TSI[4], SATAPHY[3], PCIEPHY[2] : 1010 0011 - */ - ldr r1, =0xFFFAB8A3 - ldr r2, =0x0C940 @ CLK_GATE_IP_FSYS - str r1, [r0, r2] - - /* Turn off all */ - ldr r1, =0xFFFFFFFC - ldr r2, =0x0C94C @ CLK_GATE_IP_GPS - str r1, [r0, r2] - - /* - * AC97[27], SPDIF[26], SLIMBUS[25] : 1111 0001 - * I2C2[8] : 1111 1110 - */ - ldr r1, =0xF1FFFEFF - ldr r2, =0x0C950 @ CLK_GATE_IP_PERIL - str r1, [r0, r2] - - /* - * KEYIF[16] : 1111 1110 - */ - ldr r1, =0xFFFEFFFF - ldr r2, =0x0C960 @ CLK_GATE_IP_PERIR - str r1, [r0, r2] - - /* LCD1[5], G3D[3], MFC[2], TV[1] : 1101 0001 */ - ldr r1, =0xFFFFFFD1 - ldr r2, =0x0C970 @ CLK_GATE_BLOCK - str r1, [r0, r2] - mov pc, lr - nop - nop - nop - -system_power_init: - ldr r0, =EXYNOS4_POWER_BASE @ 0x10020000 - - ldr r2, =0x330C @ PS_HOLD_CONTROL - ldr r1, [r0, r2] - orr r1, r1, #(0x3 << 8) @ Data High, Output En - str r1, [r0, r2] - - /* Power Down */ - add r2, r0, #0x3000 - str r5, [r2, #0xC20] @ TV_CONFIGURATION - str r5, [r2, #0xC40] @ MFC_CONFIGURATION - str r5, [r2, #0xC60] @ G3D_CONFIGURATION - str r5, [r2, #0xCA0] @ LCD1_CONFIGURATION - str r5, [r2, #0xCE0] @ GPS_CONFIGURATION - - mov pc, lr - nop - nop - nop - -tzpc_init: - ldr r0, =0x10110000 - mov r1, #0x0 - str r1, [r0] - mov r1, #0xff - str r1, [r0, #0x0804] - str r1, [r0, #0x0810] - str r1, [r0, #0x081C] - str r1, [r0, #0x0828] - - ldr r0, =0x10120000 - mov r1, #0x0 - str r1, [r0] - mov r1, #0xff - str r1, [r0, #0x0804] - str r1, [r0, #0x0810] - str r1, [r0, #0x081C] - str r1, [r0, #0x0828] - - ldr r0, =0x10130000 - mov r1, #0x0 - str r1, [r0] - mov r1, #0xff - str r1, [r0, #0x0804] - str r1, [r0, #0x0810] - str r1, [r0, #0x081C] - str r1, [r0, #0x0828] - - ldr r0, =0x10140000 - mov r1, #0x0 - str r1, [r0] - mov r1, #0xff - str r1, [r0, #0x0804] - str r1, [r0, #0x0810] - str r1, [r0, #0x081C] - str r1, [r0, #0x0828] - - ldr r0, =0x10150000 - mov r1, #0x0 - str r1, [r0] - mov r1, #0xff - str r1, [r0, #0x0804] - str r1, [r0, #0x0810] - str r1, [r0, #0x081C] - str r1, [r0, #0x0828] - - mov pc, lr diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c index 36a047217c5..3d508bea237 100644 --- a/board/samsung/universal_c210/universal.c +++ b/board/samsung/universal_c210/universal.c @@ -23,10 +23,17 @@ */ #include <common.h> +#include <spi.h> +#include <lcd.h> #include <asm/io.h> +#include <asm/gpio.h> #include <asm/arch/adc.h> #include <asm/arch/gpio.h> #include <asm/arch/mmc.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/watchdog.h> +#include <libtizen.h> +#include <ld9040.h> #include <power/pmic.h> #include <usb/s3c_udc.h> #include <asm/arch/cpu.h> @@ -48,22 +55,6 @@ static int get_hwrev(void) return board_rev & 0xFF; } -static void check_hw_revision(void); - -int board_init(void) -{ - gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE; - gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE; - - gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210; - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - check_hw_revision(); - printf("HW Revision:\t0x%x\n", board_rev); - - return 0; -} - int power_init_board(void) { int ret; @@ -186,7 +177,7 @@ int checkboard(void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) { - int i, err; + int err; switch (get_hwrev()) { case 0: @@ -209,75 +200,30 @@ int board_mmc_init(bd_t *bis) } /* - * eMMC GPIO: - * SDR 8-bit@48MHz at MMC0 - * GPK0[0] SD_0_CLK(2) - * GPK0[1] SD_0_CMD(2) - * GPK0[2] SD_0_CDn -> Not used - * GPK0[3:6] SD_0_DATA[0:3](2) - * GPK1[3:6] SD_0_DATA[0:3](3) - * - * DDR 4-bit@26MHz at MMC4 - * GPK0[0] SD_4_CLK(3) - * GPK0[1] SD_4_CMD(3) - * GPK0[2] SD_4_CDn -> Not used - * GPK0[3:6] SD_4_DATA[0:3](3) - * GPK1[3:6] SD_4_DATA[4:7](4) + * MMC device init + * mmc0 : eMMC (8-bit buswidth) + * mmc2 : SD card (4-bit buswidth) */ - for (i = 0; i < 7; i++) { - if (i == 2) - continue; - /* GPK0[0:6] special function 2 */ - s5p_gpio_cfg_pin(&gpio2->k0, i, 0x2); - /* GPK0[0:6] pull disable */ - s5p_gpio_set_pull(&gpio2->k0, i, GPIO_PULL_NONE); - /* GPK0[0:6] drv 4x */ - s5p_gpio_set_drv(&gpio2->k0, i, GPIO_DRV_4X); - } - - for (i = 3; i < 7; i++) { - /* GPK1[3:6] special function 3 */ - s5p_gpio_cfg_pin(&gpio2->k1, i, 0x3); - /* GPK1[3:6] pull disable */ - s5p_gpio_set_pull(&gpio2->k1, i, GPIO_PULL_NONE); - /* GPK1[3:6] drv 4x */ - s5p_gpio_set_drv(&gpio2->k1, i, GPIO_DRV_4X); - } + err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE); + if (err) + debug("SDMMC0 not configured\n"); + else + err = s5p_mmc_init(0, 8); /* T-flash detect */ s5p_gpio_cfg_pin(&gpio2->x3, 4, 0xf); s5p_gpio_set_pull(&gpio2->x3, 4, GPIO_PULL_UP); /* - * MMC device init - * mmc0 : eMMC (8-bit buswidth) - * mmc2 : SD card (4-bit buswidth) - */ - err = s5p_mmc_init(0, 8); - - /* * Check the T-flash detect pin * GPX3[4] T-flash detect pin */ if (!s5p_gpio_get_value(&gpio2->x3, 4)) { - /* - * SD card GPIO: - * GPK2[0] SD_2_CLK(2) - * GPK2[1] SD_2_CMD(2) - * GPK2[2] SD_2_CDn -> Not used - * GPK2[3:6] SD_2_DATA[0:3](2) - */ - for (i = 0; i < 7; i++) { - if (i == 2) - continue; - /* GPK2[0:6] special function 2 */ - s5p_gpio_cfg_pin(&gpio2->k2, i, 0x2); - /* GPK2[0:6] pull disable */ - s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE); - /* GPK2[0:6] drv 4x */ - s5p_gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X); - } - err = s5p_mmc_init(2, 4); + err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE); + if (err) + debug("SDMMC2 not configured\n"); + else + err = s5p_mmc_init(2, 4); } return err; @@ -331,3 +277,236 @@ struct s3c_plat_otg_data s5pc210_otg_data = { .usb_flags = PHY0_SLEEP, }; #endif + +int board_early_init_f(void) +{ + wdt_stop(); + + return 0; +} + +#ifdef CONFIG_SOFT_SPI +static void soft_spi_init(void) +{ + gpio_direction_output(CONFIG_SOFT_SPI_GPIO_SCLK, + CONFIG_SOFT_SPI_MODE & SPI_CPOL); + gpio_direction_output(CONFIG_SOFT_SPI_GPIO_MOSI, 1); + gpio_direction_input(CONFIG_SOFT_SPI_GPIO_MISO); + gpio_direction_output(CONFIG_SOFT_SPI_GPIO_CS, + !(CONFIG_SOFT_SPI_MODE & SPI_CS_HIGH)); +} + +void spi_cs_activate(struct spi_slave *slave) +{ + gpio_set_value(CONFIG_SOFT_SPI_GPIO_CS, + !(CONFIG_SOFT_SPI_MODE & SPI_CS_HIGH)); + SPI_SCL(1); + gpio_set_value(CONFIG_SOFT_SPI_GPIO_CS, + CONFIG_SOFT_SPI_MODE & SPI_CS_HIGH); +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + gpio_set_value(CONFIG_SOFT_SPI_GPIO_CS, + !(CONFIG_SOFT_SPI_MODE & SPI_CS_HIGH)); +} + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return bus == 0 && cs == 0; +} + +void universal_spi_scl(int bit) +{ + gpio_set_value(CONFIG_SOFT_SPI_GPIO_SCLK, bit); +} + +void universal_spi_sda(int bit) +{ + gpio_set_value(CONFIG_SOFT_SPI_GPIO_MOSI, bit); +} + +int universal_spi_read(void) +{ + return gpio_get_value(CONFIG_SOFT_SPI_GPIO_MISO); +} +#endif + +static void init_pmic_lcd(void) +{ + unsigned char val; + int ret = 0; + + struct pmic *p = get_pmic(); + + if (pmic_probe(p)) + return; + + /* LDO7 1.8V */ + val = 0x02; /* (1800 - 1600) / 100; */ + ret |= pmic_reg_write(p, MAX8998_REG_LDO7, val); + + /* LDO17 3.0V */ + val = 0xe; /* (3000 - 1600) / 100; */ + ret |= pmic_reg_write(p, MAX8998_REG_LDO17, val); + + /* Disable unneeded regulators */ + /* + * ONOFF1 + * Buck1 ON, Buck2 OFF, Buck3 ON, Buck4 ON + * LDO2 ON, LDO3 OFF, LDO4 OFF, LDO5 ON + */ + val = 0xB9; + ret |= pmic_reg_write(p, MAX8998_REG_ONOFF1, val); + + /* ONOFF2 + * LDO6 OFF, LDO7 ON, LDO8 OFF, LDO9 ON, + * LDO10 OFF, LDO11 OFF, LDO12 OFF, LDO13 OFF + */ + val = 0x50; + ret |= pmic_reg_write(p, MAX8998_REG_ONOFF2, val); + + /* ONOFF3 + * LDO14 OFF, LDO15 OFF, LGO16 OFF, LDO17 OFF + * EPWRHOLD OFF, EBATTMON OFF, ELBCNFG2 OFF, ELBCNFG1 OFF + */ + val = 0x00; + ret |= pmic_reg_write(p, MAX8998_REG_ONOFF3, val); + + if (ret) + puts("LCD pmic initialisation error!\n"); +} + +static void lcd_cfg_gpio(void) +{ + unsigned int i, f3_end = 4; + + for (i = 0; i < 8; i++) { + /* set GPF0,1,2[0:7] for RGB Interface and Data lines (32bit) */ + s5p_gpio_cfg_pin(&gpio1->f0, i, GPIO_FUNC(2)); + s5p_gpio_cfg_pin(&gpio1->f1, i, GPIO_FUNC(2)); + s5p_gpio_cfg_pin(&gpio1->f2, i, GPIO_FUNC(2)); + /* pull-up/down disable */ + s5p_gpio_set_pull(&gpio1->f0, i, GPIO_PULL_NONE); + s5p_gpio_set_pull(&gpio1->f1, i, GPIO_PULL_NONE); + s5p_gpio_set_pull(&gpio1->f2, i, GPIO_PULL_NONE); + + /* drive strength to max (24bit) */ + s5p_gpio_set_drv(&gpio1->f0, i, GPIO_DRV_4X); + s5p_gpio_set_rate(&gpio1->f0, i, GPIO_DRV_SLOW); + s5p_gpio_set_drv(&gpio1->f1, i, GPIO_DRV_4X); + s5p_gpio_set_rate(&gpio1->f1, i, GPIO_DRV_SLOW); + s5p_gpio_set_drv(&gpio1->f2, i, GPIO_DRV_4X); + s5p_gpio_set_rate(&gpio1->f0, i, GPIO_DRV_SLOW); + } + + for (i = 0; i < f3_end; i++) { + /* set GPF3[0:3] for RGB Interface and Data lines (32bit) */ + s5p_gpio_cfg_pin(&gpio1->f3, i, GPIO_FUNC(2)); + /* pull-up/down disable */ + s5p_gpio_set_pull(&gpio1->f3, i, GPIO_PULL_NONE); + /* drive strength to max (24bit) */ + s5p_gpio_set_drv(&gpio1->f3, i, GPIO_DRV_4X); + s5p_gpio_set_rate(&gpio1->f3, i, GPIO_DRV_SLOW); + } + + /* gpio pad configuration for LCD reset. */ + s5p_gpio_cfg_pin(&gpio2->y4, 5, GPIO_OUTPUT); + + spi_init(); +} + +static void reset_lcd(void) +{ + s5p_gpio_set_value(&gpio2->y4, 5, 1); + udelay(10000); + s5p_gpio_set_value(&gpio2->y4, 5, 0); + udelay(10000); + s5p_gpio_set_value(&gpio2->y4, 5, 1); + udelay(100); +} + +static void lcd_power_on(void) +{ + struct pmic *p = get_pmic(); + + if (pmic_probe(p)) + return; + + pmic_set_output(p, MAX8998_REG_ONOFF3, MAX8998_LDO17, LDO_ON); + pmic_set_output(p, MAX8998_REG_ONOFF2, MAX8998_LDO7, LDO_ON); +} + +vidinfo_t panel_info = { + .vl_freq = 60, + .vl_col = 480, + .vl_row = 800, + .vl_width = 480, + .vl_height = 800, + .vl_clkp = CONFIG_SYS_HIGH, + .vl_hsp = CONFIG_SYS_HIGH, + .vl_vsp = CONFIG_SYS_HIGH, + .vl_dp = CONFIG_SYS_HIGH, + + .vl_bpix = 5, /* Bits per pixel */ + + /* LD9040 LCD Panel */ + .vl_hspw = 2, + .vl_hbpd = 16, + .vl_hfpd = 16, + + .vl_vspw = 2, + .vl_vbpd = 8, + .vl_vfpd = 8, + .vl_cmd_allow_len = 0xf, + + .win_id = 0, + .cfg_gpio = lcd_cfg_gpio, + .backlight_on = NULL, + .lcd_power_on = lcd_power_on, + .reset_lcd = reset_lcd, + .dual_lcd_enabled = 0, + + .init_delay = 0, + .power_on_delay = 10000, + .reset_delay = 10000, + .interface_mode = FIMD_RGB_INTERFACE, + .mipi_enabled = 0, +}; + +void init_panel_info(vidinfo_t *vid) +{ + vid->logo_on = 1; + vid->resolution = HD_RESOLUTION; + vid->rgb_mode = MODE_RGB_P; + +#ifdef CONFIG_TIZEN + get_tizen_logo_info(vid); +#endif + + /* for LD9040. */ + vid->pclk_name = 1; /* MPLL */ + vid->sclk_div = 1; + + vid->cfg_ldo = ld9040_cfg_ldo; + vid->enable_ldo = ld9040_enable_ldo; + + setenv("lcdinfo", "lcd=ld9040"); +} + +int board_init(void) +{ + gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE; + gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE; + + gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210; + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + +#ifdef CONFIG_SOFT_SPI + soft_spi_init(); +#endif + check_hw_revision(); + printf("HW Revision:\t0x%x\n", board_rev); + + return 0; +} diff --git a/board/syteco/zmx25/zmx25.c b/board/syteco/zmx25/zmx25.c index fe5589d9314..4f37c59d807 100644 --- a/board/syteco/zmx25/zmx25.c +++ b/board/syteco/zmx25/zmx25.c @@ -33,6 +33,7 @@ #include <asm/io.h> #include <asm/arch/imx-regs.h> #include <asm/arch/imx25-pinmux.h> +#include <asm/arch/sys_proto.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/board/woodburn/Makefile b/board/woodburn/Makefile new file mode 100644 index 00000000000..b60163f9fd4 --- /dev/null +++ b/board/woodburn/Makefile @@ -0,0 +1,43 @@ +# +# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> +# +# (C) Copyright 2008-2009 Freescale Semiconductor, Inc. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := woodburn.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/woodburn/imximage.cfg b/board/woodburn/imximage.cfg new file mode 100644 index 00000000000..b4cc8ecf63a --- /dev/null +++ b/board/woodburn/imximage.cfg @@ -0,0 +1,4 @@ +BOOT_FROM sd + +# DDR2 init +DATA 4 0xB8001010 0x00000304 diff --git a/board/woodburn/lowlevel_init.S b/board/woodburn/lowlevel_init.S new file mode 100644 index 00000000000..57fb1b139e7 --- /dev/null +++ b/board/woodburn/lowlevel_init.S @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de> + * + * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * Copyright (C) 2011, Stefano Babic <sbabic@denx.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/lowlevel_macro.S> + +.globl lowlevel_init +lowlevel_init: + + core_init + + init_aips + + init_max + + init_m3if + + mov pc, lr diff --git a/board/woodburn/woodburn.c b/board/woodburn/woodburn.c new file mode 100644 index 00000000000..286749f3c91 --- /dev/null +++ b/board/woodburn/woodburn.c @@ -0,0 +1,261 @@ +/* + * Copyright (C) 2012, Stefano Babic <sbabic@denx.de> + * + * Based on flea3.c and mx35pdk.c + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/crm_regs.h> +#include <asm/arch/clock.h> +#include <asm/arch/mx35_pins.h> +#include <asm/arch/iomux.h> +#include <i2c.h> +#include <pmic.h> +#include <fsl_pmic.h> +#include <mc13892.h> +#include <mmc.h> +#include <fsl_esdhc.h> +#include <linux/types.h> +#include <asm/gpio.h> +#include <asm/arch/sys_proto.h> +#include <netdev.h> +#include <spl.h> + +#define CCM_CCMR_CONFIG 0x003F4208 + +#define ESDCTL_DDR2_CONFIG 0x007FFC3F + +/* For MMC */ +#define GPIO_MMC_CD 7 +#define GPIO_MMC_WP 8 + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init(void) +{ + gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, + PHYS_SDRAM_1_SIZE); + + return 0; +} + +static void board_setup_sdram(void) +{ + struct esdc_regs *esdc = (struct esdc_regs *)ESDCTL_BASE_ADDR; + + /* Initialize with default values both CSD0/1 */ + writel(0x2000, &esdc->esdctl0); + writel(0x2000, &esdc->esdctl1); + + mx3_setup_sdram_bank(CSD0_BASE_ADDR, ESDCTL_DDR2_CONFIG, + 13, 10, 2, 0x8080); +} + +static void setup_iomux_fec(void) +{ + /* setup pins for FEC */ + mxc_request_iomux(MX35_PIN_FEC_TX_CLK, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_RX_CLK, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_RX_DV, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_COL, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_RDATA0, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_TDATA0, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_TX_EN, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_MDC, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_MDIO, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_TX_ERR, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_RX_ERR, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_CRS, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_RDATA1, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_TDATA1, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_RDATA2, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_TDATA2, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_RDATA3, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_FEC_TDATA3, MUX_CONFIG_FUNC); +} + +int woodburn_init(void) +{ + struct ccm_regs *ccm = + (struct ccm_regs *)IMX_CCM_BASE; + + /* initialize PLL and clock configuration */ + writel(CCM_CCMR_CONFIG, &ccm->ccmr); + + /* Set-up RAM */ + board_setup_sdram(); + + /* enable clocks */ + writel(readl(&ccm->cgr0) | + MXC_CCM_CGR0_EMI_MASK | + MXC_CCM_CGR0_EDIO_MASK | + MXC_CCM_CGR0_EPIT1_MASK, + &ccm->cgr0); + + writel(readl(&ccm->cgr1) | + MXC_CCM_CGR1_FEC_MASK | + MXC_CCM_CGR1_GPIO1_MASK | + MXC_CCM_CGR1_GPIO2_MASK | + MXC_CCM_CGR1_GPIO3_MASK | + MXC_CCM_CGR1_I2C1_MASK | + MXC_CCM_CGR1_I2C2_MASK | + MXC_CCM_CGR1_I2C3_MASK, + &ccm->cgr1); + + /* Set-up NAND */ + __raw_writel(readl(&ccm->rcsr) | MXC_CCM_RCSR_NFC_FMS, &ccm->rcsr); + + /* Set pinmux for the required peripherals */ + setup_iomux_fec(); + + /* setup GPIO1_4 FEC_ENABLE signal */ + mxc_request_iomux(MX35_PIN_SCKR, MUX_CONFIG_ALT5); + gpio_direction_output(4, 1); + mxc_request_iomux(MX35_PIN_HCKT, MUX_CONFIG_ALT5); + gpio_direction_output(9, 0); + gpio_set_value(9, 1); + + return 0; +} + +#if defined(CONFIG_SPL_BUILD) +void board_init_f(ulong dummy) +{ + /* Set the stack pointer. */ + asm volatile("mov sp, %0\n" : : "r"(CONFIG_SPL_STACK)); + + /* Initialize MUX and SDRAM */ + woodburn_init(); + + /* Clear the BSS. */ + memset(__bss_start, 0, __bss_end__ - __bss_start); + + /* Set global data pointer. */ + gd = &gdata; + + preloader_console_init(); + timer_init(); + + board_init_r(NULL, 0); +} + +void spl_board_init(void) +{ +} + +#endif + + +/* Booting from NOR in external mode */ +int board_early_init_f(void) +{ + return woodburn_init(); +} + + +int board_init(void) +{ + struct pmic *p; + u32 val; + + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + pmic_init(); + p = get_pmic(); + + /* + * Set switchers in Auto in NORMAL mode & STANDBY mode + * Setup the switcher mode for SW1 & SW2 + */ + pmic_reg_read(p, REG_SW_4, &val); + val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) | + (SWMODE_MASK << SWMODE2_SHIFT))); + val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) | + (SWMODE_AUTO_AUTO << SWMODE2_SHIFT); + /* Set SWILIMB */ + val |= (1 << 22); + pmic_reg_write(p, REG_SW_4, val); + + /* Setup the switcher mode for SW3 & SW4 */ + pmic_reg_read(p, REG_SW_5, &val); + val &= ~((SWMODE_MASK << SWMODE4_SHIFT) | + (SWMODE_MASK << SWMODE3_SHIFT)); + val |= (SWMODE_AUTO_AUTO << SWMODE4_SHIFT) | + (SWMODE_AUTO_AUTO << SWMODE3_SHIFT); + pmic_reg_write(p, REG_SW_5, val); + + /* Set VGEN1 to 3.15V */ + pmic_reg_read(p, REG_SETTING_0, &val); + val &= ~(VGEN1_MASK); + val |= VGEN1_3_15; + pmic_reg_write(p, REG_SETTING_0, val); + + pmic_reg_read(p, REG_MODE_0, &val); + val |= VGEN1EN; + pmic_reg_write(p, REG_MODE_0, val); + udelay(2000); + + return 0; +} + +#if defined(CONFIG_FSL_ESDHC) +struct fsl_esdhc_cfg esdhc_cfg = {MMC_SDHC1_BASE_ADDR}; + +int board_mmc_init(bd_t *bis) +{ + /* configure pins for SDHC1 only */ + mxc_request_iomux(MX35_PIN_SD1_CMD, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_SD1_CLK, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_SD1_DATA0, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_SD1_DATA1, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_SD1_DATA2, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_SD1_DATA3, MUX_CONFIG_FUNC); + + /* MMC Card Detect on GPIO1_7 */ + mxc_request_iomux(MX35_PIN_SCKT, MUX_CONFIG_ALT5); + mxc_iomux_set_input(MUX_IN_GPIO1_IN_7, 0x1); + gpio_direction_input(GPIO_MMC_CD); + + mxc_request_iomux(MX35_PIN_FST, MUX_CONFIG_ALT5); + mxc_iomux_set_input(MUX_IN_GPIO1_IN_8, 0x1); + gpio_direction_output(GPIO_MMC_WP, 0); + + esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK); + + return fsl_esdhc_initialize(bis, &esdhc_cfg); +} + +int board_mmc_getcd(struct mmc *mmc) +{ + return !gpio_get_value(GPIO_MMC_CD); +} +#endif + +u32 get_board_rev(void) +{ + int rev = 0; + + return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8; +} diff --git a/boards.cfg b/boards.cfg index 35f38f31d4b..388e4a4461d 100644 --- a/boards.cfg +++ b/boards.cfg @@ -50,6 +50,8 @@ tt01 arm arm1136 - hale imx31_litekit arm arm1136 - logicpd mx31 flea3 arm arm1136 - CarMediaLab mx35 mx35pdk arm arm1136 - freescale mx35 +woodburn arm arm1136 - - mx35 +woodburn_sd arm arm1136 woodburn - mx35 woodburn_sd:IMX_CONFIG=board/woodburn/imximage.cfg omap2420h4 arm arm1136 - ti omap24xx tnetv107x_evm arm arm1176 tnetv107xevm ti tnetv107x rpi_b arm arm1176 rpi_b raspberrypi bcm2835 diff --git a/common/Makefile b/common/Makefile index c29a7d82e33..132b3bd79c0 100644 --- a/common/Makefile +++ b/common/Makefile @@ -75,6 +75,7 @@ COBJS-$(CONFIG_CMD_CONSOLE) += cmd_console.o COBJS-$(CONFIG_CMD_CPLBINFO) += cmd_cplbinfo.o COBJS-$(CONFIG_DATAFLASH_MMC_SELECT) += cmd_dataflash_mmc_mux.o COBJS-$(CONFIG_CMD_DATE) += cmd_date.o +COBJS-$(CONFIG_CMD_SOUND) += cmd_sound.o ifdef CONFIG_4xx COBJS-$(CONFIG_CMD_SETGETDCR) += cmd_dcr.o endif diff --git a/common/cmd_sound.c b/common/cmd_sound.c new file mode 100644 index 00000000000..459d1ebaf2c --- /dev/null +++ b/common/cmd_sound.c @@ -0,0 +1,96 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * Rajeshwari Shinde <rajeshwari.s@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <fdtdec.h> +#include <sound.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* Initilaise sound subsystem */ +static int do_init(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + int ret; + + ret = sound_init(); + if (ret) { + printf("Initialise Audio driver failed\n"); + return CMD_RET_FAILURE; + } + + return 0; +} + +/* play sound from buffer */ +static int do_play(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + int ret = 0; + int msec = 1000; + int freq = 400; + + if (argc > 1) + msec = simple_strtoul(argv[1], NULL, 10); + if (argc > 2) + freq = simple_strtoul(argv[2], NULL, 10); + + ret = sound_play(msec, freq); + if (ret) { + printf("play failed"); + return CMD_RET_FAILURE; + } + + return 0; +} + +static cmd_tbl_t cmd_sound_sub[] = { + U_BOOT_CMD_MKENT(init, 0, 1, do_init, "", ""), + U_BOOT_CMD_MKENT(play, 2, 1, do_play, "", ""), +}; + +/* process sound command */ +static int do_sound(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + cmd_tbl_t *c; + + if (argc < 1) + return CMD_RET_USAGE; + + /* Strip off leading 'sound' command argument */ + argc--; + argv++; + + c = find_cmd_tbl(argv[0], &cmd_sound_sub[0], ARRAY_SIZE(cmd_sound_sub)); + + if (c) + return c->cmd(cmdtp, flag, argc, argv); + else + return CMD_RET_USAGE; +} + +U_BOOT_CMD( + sound, 4, 1, do_sound, + "sound sub-system", + "init - initialise the sound driver\n" + "sound play [len] [freq] - play a sound for len ms at freq hz\n" +); diff --git a/common/lcd.c b/common/lcd.c index 4c83a8bf035..4778655a26a 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -72,6 +72,15 @@ # endif #endif +#ifndef CONFIG_LCD_ALIGNMENT +#define CONFIG_LCD_ALIGNMENT PAGE_SIZE +#endif + +/* By default we scroll by a single line */ +#ifndef CONFIG_CONSOLE_SCROLL_LINES +#define CONFIG_CONSOLE_SCROLL_LINES 1 +#endif + DECLARE_GLOBAL_DATA_PTR; ulong lcd_setmem (ulong addr); @@ -90,6 +99,9 @@ static void lcd_setbgcolor(int color); char lcd_is_enabled = 0; +static char lcd_flush_dcache; /* 1 to flush dcache after each lcd update */ + + #ifdef NOT_USED_SO_FAR static void lcd_getcolreg(ushort regno, ushort *red, ushort *green, ushort *blue); @@ -98,15 +110,46 @@ static int lcd_getfgcolor(void); /************************************************************************/ +/* Flush LCD activity to the caches */ +void lcd_sync(void) +{ + /* + * flush_dcache_range() is declared in common.h but it seems that some + * architectures do not actually implement it. Is there a way to find + * out whether it exists? For now, ARM is safe. + */ +#if defined(CONFIG_ARM) && !defined(CONFIG_SYS_DCACHE_OFF) + int line_length; + + if (lcd_flush_dcache) + flush_dcache_range((u32)lcd_base, + (u32)(lcd_base + lcd_get_size(&line_length))); +#endif +} + +void lcd_set_flush_dcache(int flush) +{ + lcd_flush_dcache = (flush != 0); +} + /*----------------------------------------------------------------------*/ static void console_scrollup(void) { - /* Copy up rows ignoring the first one */ - memcpy(CONSOLE_ROW_FIRST, CONSOLE_ROW_SECOND, CONSOLE_SCROLL_SIZE); + const int rows = CONFIG_CONSOLE_SCROLL_LINES; - /* Clear the last one */ - memset(CONSOLE_ROW_LAST, COLOR_MASK(lcd_color_bg), CONSOLE_ROW_SIZE); + /* Copy up rows ignoring those that will be overwritten */ + memcpy(CONSOLE_ROW_FIRST, + lcd_console_address + CONSOLE_ROW_SIZE * rows, + CONSOLE_SIZE - CONSOLE_ROW_SIZE * rows); + + /* Clear the last rows */ + memset(lcd_console_address + CONSOLE_SIZE - CONSOLE_ROW_SIZE * rows, + COLOR_MASK(lcd_color_bg), + CONSOLE_ROW_SIZE * rows); + + lcd_sync(); + console_row -= rows; } /*----------------------------------------------------------------------*/ @@ -135,7 +178,8 @@ static inline void console_newline(void) if (console_row >= CONSOLE_ROWS) { /* Scroll everything up */ console_scrollup(); - --console_row; + } else { + lcd_sync(); } } @@ -191,6 +235,7 @@ void lcd_puts(const char *s) while (*s) { lcd_putc(*s++); } + lcd_sync(); } /*----------------------------------------------------------------------*/ @@ -326,6 +371,12 @@ static void test_pattern(void) /* ** GENERIC Initialization Routines */ /************************************************************************/ +int lcd_get_size(int *line_length) +{ + *line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8; + return *line_length * panel_info.vl_row; +} + int drv_lcd_init (void) { struct stdio_dev lcddev; @@ -333,7 +384,7 @@ int drv_lcd_init (void) lcd_base = (void *)(gd->fb_base); - lcd_line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8; + lcd_get_size(&lcd_line_length); lcd_init(lcd_base); /* LCD initialization */ @@ -352,13 +403,6 @@ int drv_lcd_init (void) } /*----------------------------------------------------------------------*/ -static -int do_lcd_clear(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) -{ - lcd_clear(); - return 0; -} - void lcd_clear(void) { #if LCD_BPP == LCD_MONOCHROME @@ -400,6 +444,14 @@ void lcd_clear(void) console_col = 0; console_row = 0; + lcd_sync(); +} + +static int do_lcd_clear(cmd_tbl_t *cmdtp, int flag, int argc, + char *const argv[]) +{ + lcd_clear(); + return 0; } U_BOOT_CMD( @@ -445,15 +497,16 @@ static int lcd_init(void *lcdbase) ulong lcd_setmem(ulong addr) { ulong size; - int line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8; + int line_length; debug("LCD panel info: %d x %d, %d bit/pix\n", panel_info.vl_col, panel_info.vl_row, NBITS(panel_info.vl_bpix)); - size = line_length * panel_info.vl_row; + size = lcd_get_size(&line_length); - /* Round up to nearest full page */ - size = (size + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1); + /* Round up to nearest full page, or MMU section if defined */ + size = ALIGN(size, CONFIG_LCD_ALIGNMENT); + addr = ALIGN(addr - CONFIG_LCD_ALIGNMENT + 1, CONFIG_LCD_ALIGNMENT); /* Allocate pages for the frame buffer. */ addr -= size; @@ -610,6 +663,7 @@ void bitmap_plot(int x, int y) } WATCHDOG_RESET(); + lcd_sync(); } #else static inline void bitmap_plot(int x, int y) {} @@ -975,6 +1029,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) break; }; + lcd_sync(); return 0; } #endif diff --git a/common/main.c b/common/main.c index 5362781f187..44fa20dd6ac 100644 --- a/common/main.c +++ b/common/main.c @@ -1139,8 +1139,16 @@ int readline_into_buffer(const char *const prompt, char *buffer, int timeout) puts (tab_seq+(col&07)); col += 8 - (col&07); } else { - ++col; /* echo input */ - putc (c); + char buf[2]; + + /* + * Echo input using puts() to force am + * LCD flush if we are using an LCD + */ + ++col; + buf[0] = c; + buf[1] = '\0'; + puts(buf); } *p++ = c; ++n; diff --git a/doc/README.imx5 b/doc/README.imx5 index f7eab7d4b2e..e08941e2ae3 100644 --- a/doc/README.imx5 +++ b/doc/README.imx5 @@ -15,3 +15,8 @@ i.MX5x SoCs. mode), which causes the effect of this failure to be much lower (in terms of frequency deviation), avoiding system failure, or at least decreasing the likelihood of system failure. + +1.2 CONFIG_SYS_MAIN_PWR_ON: Trigger MAIN_PWR_ON upon startup. + This option should be enabled for boards having a SYS_ON_OFF_CTL signal + connected to GPIO1[23] and triggering the MAIN_PWR_ON signal like in the + reference designs. diff --git a/doc/device-tree-bindings/pwm/tegra20-pwm.txt b/doc/device-tree-bindings/pwm/tegra20-pwm.txt new file mode 100644 index 00000000000..01438ecd662 --- /dev/null +++ b/doc/device-tree-bindings/pwm/tegra20-pwm.txt @@ -0,0 +1,18 @@ +Tegra SoC PWFM controller + +Required properties: +- compatible: should be one of: + - "nvidia,tegra20-pwm" + - "nvidia,tegra30-pwm" +- reg: physical base address and length of the controller's registers +- #pwm-cells: On Tegra the number of cells used to specify a PWM is 2. The + first cell specifies the per-chip index of the PWM to use and the second + cell is the period in nanoseconds. + +Example: + + pwm: pwm@7000a000 { + compatible = "nvidia,tegra20-pwm"; + reg = <0x7000a000 0x100>; + #pwm-cells = <2>; + }; diff --git a/doc/device-tree-bindings/video/displaymode.txt b/doc/device-tree-bindings/video/displaymode.txt new file mode 100644 index 00000000000..45ca42db508 --- /dev/null +++ b/doc/device-tree-bindings/video/displaymode.txt @@ -0,0 +1,42 @@ +videomode bindings +================== + +(from http://lists.freedesktop.org/archives/dri-devel/2012-July/024875.html) + +Required properties: + - xres, yres: Display resolution + - left-margin, right-margin, hsync-len: Horizontal Display timing + parameters in pixels + - upper-margin, lower-margin, vsync-len: Vertical display timing + parameters in lines + - clock: display clock in Hz + +Optional properties: + - width-mm, height-mm: Display dimensions in mm + - hsync-active-high (bool): Hsync pulse is active high + - vsync-active-high (bool): Vsync pulse is active high + - interlaced (bool): This is an interlaced mode + - doublescan (bool): This is a doublescan mode + +There are different ways of describing a display mode. The devicetree +representation corresponds to the one used by the Linux Framebuffer +framework described here in Documentation/fb/framebuffer.txt. This +representation has been chosen because it's the only format which does +not allow for inconsistent parameters. Unlike the Framebuffer framework +the devicetree has the clock in Hz instead of ps. + +Example: + + display@0 { + /* 1920x1080p24 */ + clock = <52000000>; + xres = <1920>; + yres = <1080>; + left-margin = <25>; + right-margin = <25>; + hsync-len = <25>; + lower-margin = <2>; + upper-margin = <2>; + vsync-len = <2>; + hsync-active-high; + }; diff --git a/doc/device-tree-bindings/video/tegra20-dc.txt b/doc/device-tree-bindings/video/tegra20-dc.txt new file mode 100644 index 00000000000..4731c3fbab4 --- /dev/null +++ b/doc/device-tree-bindings/video/tegra20-dc.txt @@ -0,0 +1,85 @@ +Display Controller +------------------ + +(there isn't yet a generic binding in Linux, so this describes what is in +U-Boot, and may change based on Linux activity) + +The device node for a display device is as described in the document +"Open Firmware Recommended Practice : Universal Serial Bus" with the +following modifications and additions : + +Required properties : + - compatible : Should be "nvidia,tegra20-dc" + +Required subnode 'rgb' is as follows: + +Required properties (rgb) : + - nvidia,panel : phandle of LCD panel information + + +The panel node describes the panel itself. This has the properties listed in +displaymode.txt as well as: + +Required properties (panel) : + - nvidia,bits-per-pixel: number of bits per pixel (depth) + - nvidia,pwm : pwm to use to set display contrast (see tegra20-pwm.txt) + - nvidia,panel-timings: 4 cells containing required timings in ms: + * delay before asserting panel_vdd + * delay between panel_vdd-rise and data-rise + * delay between data-rise and backlight_vdd-rise + * delay between backlight_vdd and pwm-rise + * delay between pwm-rise and backlight_en-rise + +Optional GPIO properies all have (phandle, GPIO number, flags): + - nvidia,backlight-enable-gpios: backlight enable GPIO + - nvidia,lvds-shutdown-gpios: LVDS power shutdown GPIO + - nvidia,backlight-vdd-gpios: backlight power GPIO + - nvidia,panel-vdd-gpios: panel power GPIO + +Example: + +host1x { + compatible = "nvidia,tegra20-host1x", "simple-bus"; + reg = <0x50000000 0x00024000>; + interrupts = <0 65 0x04 /* mpcore syncpt */ + 0 67 0x04>; /* mpcore general */ + + #address-cells = <1>; + #size-cells = <1>; + status = "okay"; + + ranges = <0x54000000 0x54000000 0x04000000>; + + dc@54200000 { + compatible = "nvidia,tegra20-dc"; + reg = <0x54200000 0x00040000>; + interrupts = <0 73 0x04>; + status = "okay"; + + rgb { + status = "okay"; + nvidia,panel = <&lcd_panel>; + }; + }; +}; + +lcd_panel: panel { + /* Seaboard has 1366x768 */ + clock = <70600000>; + xres = <1366>; + yres = <768>; + left-margin = <58>; + right-margin = <58>; + hsync-len = <58>; + lower-margin = <4>; + upper-margin = <4>; + vsync-len = <4>; + hsync-active-high; + nvidia,bits-per-pixel = <16>; + nvidia,pwm = <&pwm 2 0>; + nvidia,backlight-enable-gpios = <&gpio 28 0>; /* PD4 */ + nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */ + nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */ + nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */ + nvidia,panel-timings = <400 4 203 17 15>; +}; diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c index 2c79bff62b6..a3880641f0a 100644 --- a/drivers/gpio/mxc_gpio.c +++ b/drivers/gpio/mxc_gpio.c @@ -42,14 +42,14 @@ static unsigned long gpio_ports[] = { [1] = GPIO2_BASE_ADDR, [2] = GPIO3_BASE_ADDR, #if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \ - defined(CONFIG_MX53) || defined(CONFIG_MX6Q) + defined(CONFIG_MX53) || defined(CONFIG_MX6) [3] = GPIO4_BASE_ADDR, #endif -#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6Q) +#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6) [4] = GPIO5_BASE_ADDR, [5] = GPIO6_BASE_ADDR, #endif -#if defined(CONFIG_MX53) || defined(CONFIG_MX6Q) +#if defined(CONFIG_MX53) || defined(CONFIG_MX6) [6] = GPIO7_BASE_ADDR, #endif }; diff --git a/drivers/gpio/s5p_gpio.c b/drivers/gpio/s5p_gpio.c index 47f32139279..656bf4a06c2 100644 --- a/drivers/gpio/s5p_gpio.c +++ b/drivers/gpio/s5p_gpio.c @@ -144,9 +144,11 @@ void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode) struct s5p_gpio_bank *s5p_gpio_get_bank(unsigned gpio) { - int bank = gpio / GPIO_PER_BANK; - bank *= sizeof(struct s5p_gpio_bank); + int bank; + unsigned g = gpio - s5p_gpio_part_max(gpio); + bank = g / GPIO_PER_BANK; + bank *= sizeof(struct s5p_gpio_bank); return (struct s5p_gpio_bank *) (s5p_gpio_base(gpio) + bank); } diff --git a/drivers/input/tegra-kbc.c b/drivers/input/tegra-kbc.c index ab7a9e33ee0..88471d3edf2 100644 --- a/drivers/input/tegra-kbc.c +++ b/drivers/input/tegra-kbc.c @@ -63,6 +63,7 @@ static struct keyb { struct kbc_tegra *kbc; /* tegra keyboard controller */ unsigned char inited; /* 1 if keyboard has been inited */ unsigned char first_scan; /* 1 if this is our first key scan */ + unsigned char created; /* 1 if driver has been created */ /* * After init we must wait a short time before polling the keyboard. @@ -306,6 +307,10 @@ static void tegra_kbc_open(void) */ static int init_tegra_keyboard(void) { + /* check if already created */ + if (config.created) + return 0; + #ifdef CONFIG_OF_CONTROL int node; @@ -349,6 +354,7 @@ static int init_tegra_keyboard(void) config_kbc_gpio(config.kbc); tegra_kbc_open(); + config.created = 1; debug("%s: Tegra keyboard ready\n", __func__); return 0; @@ -357,6 +363,8 @@ static int init_tegra_keyboard(void) int drv_keyboard_init(void) { struct stdio_dev dev; + char *stdinname = getenv("stdin"); + int error; if (input_init(&config.input, 0)) { debug("%s: Cannot set up input\n", __func__); @@ -372,5 +380,13 @@ int drv_keyboard_init(void) dev.start = init_tegra_keyboard; /* Register the device. init_tegra_keyboard() will be called soon */ - return input_stdio_register(&dev); + error = input_stdio_register(&dev); + if (error) + return error; +#ifdef CONFIG_CONSOLE_MUX + error = iomux_doenv(stdin, stdinname); + if (error) + return error; +#endif + return 0; } diff --git a/drivers/misc/pmic_max77686.c b/drivers/misc/pmic_max77686.c new file mode 100644 index 00000000000..36f7f4dde7a --- /dev/null +++ b/drivers/misc/pmic_max77686.c @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * Rajeshwari Shinde <rajeshwari.s@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <pmic.h> +#include <max77686_pmic.h> + +int pmic_init(void) +{ + struct pmic *p = get_pmic(); + static const char name[] = "MAX77686_PMIC"; + + puts("Board PMIC init\n"); + p->name = name; + p->interface = PMIC_I2C; + p->number_of_regs = PMIC_NUM_OF_REGS; + p->hw.i2c.addr = MAX77686_I2C_ADDR; + p->hw.i2c.tx_num = 1; + p->bus = I2C_PMIC; + + return 0; +} diff --git a/drivers/mmc/tegra_mmc.c b/drivers/mmc/tegra_mmc.c index b141eafc7bb..d749ab095e3 100644 --- a/drivers/mmc/tegra_mmc.c +++ b/drivers/mmc/tegra_mmc.c @@ -565,10 +565,11 @@ int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio) mmc->getcd = tegra_mmc_getcd; mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; + mmc->host_caps = 0; if (bus_width == 8) - mmc->host_caps = MMC_MODE_8BIT; - else - mmc->host_caps = MMC_MODE_4BIT; + mmc->host_caps |= MMC_MODE_8BIT; + if (bus_width >= 4) + mmc->host_caps |= MMC_MODE_4BIT; mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_HC; /* diff --git a/drivers/power/power_fsl.c b/drivers/power/power_fsl.c index 651f88f850a..a663831589f 100644 --- a/drivers/power/power_fsl.c +++ b/drivers/power/power_fsl.c @@ -27,6 +27,12 @@ #include <fsl_pmic.h> #include <errno.h> +#if defined(CONFIG_PMIC_FSL_MC13892) +#define FSL_PMIC_I2C_LENGTH 3 +#elif defined(CONFIG_PMIC_FSL_MC34704) +#define FSL_PMIC_I2C_LENGTH 1 +#endif + #if defined(CONFIG_POWER_SPI) static u32 pmic_spi_prepare_tx(u32 reg, u32 *val, u32 write) { @@ -59,7 +65,7 @@ int pmic_init(unsigned char bus) #elif defined(CONFIG_POWER_I2C) p->interface = PMIC_I2C; p->hw.i2c.addr = CONFIG_SYS_FSL_PMIC_I2C_ADDR; - p->hw.i2c.tx_num = 3; + p->hw.i2c.tx_num = FSL_PMIC_I2C_LENGTH; p->bus = bus; #else #error "You must select CONFIG_POWER_SPI or CONFIG_PMIC_I2C" diff --git a/drivers/serial/s3c64xx.c b/drivers/serial/s3c64xx.c index f53c2bf003e..b590992dc81 100644 --- a/drivers/serial/s3c64xx.c +++ b/drivers/serial/s3c64xx.c @@ -22,7 +22,8 @@ */ #include <common.h> - +#include <linux/compiler.h> +#include <serial.h> #include <asm/arch/s3c6400.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/drivers/sound/Makefile b/drivers/sound/Makefile new file mode 100644 index 00000000000..8fdffb10eff --- /dev/null +++ b/drivers/sound/Makefile @@ -0,0 +1,48 @@ +# +# Copyright (C) 2012 Samsung Electronics +# R. Chandrasekar <rcsekar@samsung.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB := $(obj)libsound.o + +COBJS-$(CONFIG_SOUND) += sound.o +COBJS-$(CONFIG_I2S) += samsung-i2s.o +COBJS-$(CONFIG_SOUND_WM8994) += wm8994.o + +COBJS := $(COBJS-y) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +# diff --git a/drivers/sound/samsung-i2s.c b/drivers/sound/samsung-i2s.c new file mode 100644 index 00000000000..9f3117dd942 --- /dev/null +++ b/drivers/sound/samsung-i2s.c @@ -0,0 +1,358 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * R. Chandrasekar <rcsekar@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/arch/clk.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/i2s-regs.h> +#include <asm/io.h> +#include <common.h> +#include <sound.h> +#include <i2s.h> + +#define FIC_TX2COUNT(x) (((x) >> 24) & 0xf) +#define FIC_TX1COUNT(x) (((x) >> 16) & 0xf) +#define FIC_TXCOUNT(x) (((x) >> 8) & 0xf) +#define FIC_RXCOUNT(x) (((x) >> 0) & 0xf) +#define FICS_TXCOUNT(x) (((x) >> 8) & 0x7f) + +#define TIMEOUT_I2S_TX 100 /* i2s transfer timeout */ + +/* + * Sets the frame size for I2S LR clock + * + * @param i2s_reg i2s regiter address + * @param rfs Frame Size + */ +static void i2s_set_lr_framesize(struct i2s_reg *i2s_reg, unsigned int rfs) +{ + unsigned int mod = readl(&i2s_reg->mod); + + mod &= ~MOD_RCLK_MASK; + + switch (rfs) { + case 768: + mod |= MOD_RCLK_768FS; + break; + case 512: + mod |= MOD_RCLK_512FS; + break; + case 384: + mod |= MOD_RCLK_384FS; + break; + default: + mod |= MOD_RCLK_256FS; + break; + } + + writel(mod, &i2s_reg->mod); +} + +/* + * Sets the i2s transfer control + * + * @param i2s_reg i2s regiter address + * @param on 1 enable tx , 0 disable tx transfer + */ +static void i2s_txctrl(struct i2s_reg *i2s_reg, int on) +{ + unsigned int con = readl(&i2s_reg->con); + unsigned int mod = readl(&i2s_reg->mod) & ~MOD_MASK; + + if (on) { + con |= CON_ACTIVE; + con &= ~CON_TXCH_PAUSE; + + } else { + + con |= CON_TXCH_PAUSE; + con &= ~CON_ACTIVE; + } + + writel(mod, &i2s_reg->mod); + writel(con, &i2s_reg->con); +} + +/* + * set the bit clock frame size (in multiples of LRCLK) + * + * @param i2s_reg i2s regiter address + * @param bfs bit Frame Size + */ +static void i2s_set_bitclk_framesize(struct i2s_reg *i2s_reg, unsigned bfs) +{ + unsigned int mod = readl(&i2s_reg->mod); + + mod &= ~MOD_BCLK_MASK; + + switch (bfs) { + case 48: + mod |= MOD_BCLK_48FS; + break; + case 32: + mod |= MOD_BCLK_32FS; + break; + case 24: + mod |= MOD_BCLK_24FS; + break; + case 16: + mod |= MOD_BCLK_16FS; + break; + default: + return; + } + writel(mod, &i2s_reg->mod); +} + +/* + * flushes the i2stx fifo + * + * @param i2s_reg i2s regiter address + * @param flush Tx fifo flush command (0x00 - do not flush + * 0x80 - flush tx fifo) + */ +void i2s_fifo(struct i2s_reg *i2s_reg, unsigned int flush) +{ + /* Flush the FIFO */ + setbits_le32(&i2s_reg->fic, flush); + clrbits_le32(&i2s_reg->fic, flush); +} + +/* + * Set System Clock direction + * + * @param i2s_reg i2s regiter address + * @param dir Clock direction + * + * @return int value 0 for success, -1 in case of error + */ +int i2s_set_sysclk_dir(struct i2s_reg *i2s_reg, int dir) +{ + unsigned int mod = readl(&i2s_reg->mod); + + if (dir == SND_SOC_CLOCK_IN) + mod |= MOD_CDCLKCON; + else + mod &= ~MOD_CDCLKCON; + + writel(mod, &i2s_reg->mod); + + return 0; +} + +/* + * Sets I2S Clcok format + * + * @param fmt i2s clock properties + * @param i2s_reg i2s regiter address + * + * @return int value 0 for success, -1 in case of error + */ +int i2s_set_fmt(struct i2s_reg *i2s_reg, unsigned int fmt) +{ + unsigned int mod = readl(&i2s_reg->mod); + unsigned int tmp = 0; + unsigned int ret = 0; + + /* Format is priority */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_RIGHT_J: + tmp |= MOD_LR_RLOW; + tmp |= MOD_SDF_MSB; + break; + case SND_SOC_DAIFMT_LEFT_J: + tmp |= MOD_LR_RLOW; + tmp |= MOD_SDF_LSB; + break; + case SND_SOC_DAIFMT_I2S: + tmp |= MOD_SDF_IIS; + break; + default: + debug("%s: Invalid format priority [0x%x]\n", __func__, + (fmt & SND_SOC_DAIFMT_FORMAT_MASK)); + return -1; + } + + /* + * INV flag is relative to the FORMAT flag - if set it simply + * flips the polarity specified by the Standard + */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_NB_IF: + if (tmp & MOD_LR_RLOW) + tmp &= ~MOD_LR_RLOW; + else + tmp |= MOD_LR_RLOW; + break; + default: + debug("%s: Invalid clock ploarity input [0x%x]\n", __func__, + (fmt & SND_SOC_DAIFMT_INV_MASK)); + return -1; + } + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + tmp |= MOD_SLAVE; + break; + case SND_SOC_DAIFMT_CBM_CFM: + /* Set default source clock in Master mode */ + ret = i2s_set_sysclk_dir(i2s_reg, SND_SOC_CLOCK_OUT); + if (ret != 0) { + debug("%s:set i2s clock direction failed\n", __func__); + return -1; + } + break; + default: + debug("%s: Invalid master selection [0x%x]\n", __func__, + (fmt & SND_SOC_DAIFMT_MASTER_MASK)); + return -1; + } + + mod &= ~(MOD_SDF_MASK | MOD_LR_RLOW | MOD_SLAVE); + mod |= tmp; + writel(mod, &i2s_reg->mod); + + return 0; +} + +/* + * Sets the sample width in bits + * + * @param blc samplewidth (size of sample in bits) + * @param i2s_reg i2s regiter address + * + * @return int value 0 for success, -1 in case of error + */ +int i2s_set_samplesize(struct i2s_reg *i2s_reg, unsigned int blc) +{ + unsigned int mod = readl(&i2s_reg->mod); + + mod &= ~MOD_BLCP_MASK; + mod &= ~MOD_BLC_MASK; + + switch (blc) { + case 8: + mod |= MOD_BLCP_8BIT; + mod |= MOD_BLC_8BIT; + break; + case 16: + mod |= MOD_BLCP_16BIT; + mod |= MOD_BLC_16BIT; + break; + case 24: + mod |= MOD_BLCP_24BIT; + mod |= MOD_BLC_24BIT; + break; + default: + debug("%s: Invalid sample size input [0x%x]\n", + __func__, blc); + return -1; + } + writel(mod, &i2s_reg->mod); + + return 0; +} + +int i2s_transfer_tx_data(struct i2stx_info *pi2s_tx, unsigned int *data, + unsigned long data_size) +{ + int i; + int start; + struct i2s_reg *i2s_reg = + (struct i2s_reg *)pi2s_tx->base_address; + + if (data_size < FIFO_LENGTH) { + debug("%s : Invalid data size\n", __func__); + return -1; /* invalid pcm data size */ + } + + /* fill the tx buffer before stating the tx transmit */ + for (i = 0; i < FIFO_LENGTH; i++) + writel(*data++, &i2s_reg->txd); + + data_size -= FIFO_LENGTH; + i2s_txctrl(i2s_reg, I2S_TX_ON); + + while (data_size > 0) { + start = get_timer(0); + if (!(CON_TXFIFO_FULL & (readl(&i2s_reg->con)))) { + writel(*data++, &i2s_reg->txd); + data_size--; + } else { + if (get_timer(start) > TIMEOUT_I2S_TX) { + i2s_txctrl(i2s_reg, I2S_TX_OFF); + debug("%s: I2S Transfer Timeout\n", __func__); + return -1; + } + } + } + i2s_txctrl(i2s_reg, I2S_TX_OFF); + + return 0; +} + +int i2s_tx_init(struct i2stx_info *pi2s_tx) +{ + int ret; + struct i2s_reg *i2s_reg = + (struct i2s_reg *)pi2s_tx->base_address; + + /* Initialize GPIO for I2s */ + exynos_pinmux_config(PERIPH_ID_I2S1, 0); + + /* Set EPLL Clock */ + ret = set_epll_clk(pi2s_tx->audio_pll_clk); + if (ret != 0) { + debug("%s: epll clock set rate falied\n", __func__); + return -1; + } + + /* Select Clk Source for Audio1 */ + set_i2s_clk_source(); + + /* Set Prescaler to get MCLK */ + set_i2s_clk_prescaler(pi2s_tx->audio_pll_clk, + (pi2s_tx->samplingrate * (pi2s_tx->rfs))); + + /* Configure I2s format */ + ret = i2s_set_fmt(i2s_reg, (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM)); + if (ret == 0) { + i2s_set_lr_framesize(i2s_reg, pi2s_tx->rfs); + ret = i2s_set_samplesize(i2s_reg, pi2s_tx->bitspersample); + if (ret != 0) { + debug("%s:set sample rate failed\n", __func__); + return -1; + } + + i2s_set_bitclk_framesize(i2s_reg, pi2s_tx->bfs); + /* disable i2s transfer flag and flush the fifo */ + i2s_txctrl(i2s_reg, I2S_TX_OFF); + i2s_fifo(i2s_reg, FIC_TXFLUSH); + } else { + debug("%s: failed\n", __func__); + } + + return ret; +} diff --git a/drivers/sound/sound.c b/drivers/sound/sound.c new file mode 100644 index 00000000000..4c74534c953 --- /dev/null +++ b/drivers/sound/sound.c @@ -0,0 +1,228 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * R. Chandrasekar <rcsekar@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <malloc.h> +#include <common.h> +#include <asm/io.h> +#include <i2c.h> +#include <i2s.h> +#include <sound.h> +#include "wm8994.h" +#include <asm/arch/sound.h> + +/* defines */ +#define SOUND_400_HZ 400 +#define SOUND_BITS_IN_BYTE 8 + +static struct i2stx_info g_i2stx_pri; +static struct sound_codec_info g_codec_info; + +/* + * get_sound_fdt_values gets fdt values for i2s parameters + * + * @param i2stx_info i2s transmitter transfer param structure + * @param blob FDT blob + */ +static void get_sound_i2s_values(struct i2stx_info *i2s) +{ + i2s->base_address = samsung_get_base_i2s(); + i2s->audio_pll_clk = I2S_PLL_CLK; + i2s->samplingrate = I2S_SAMPLING_RATE; + i2s->bitspersample = I2S_BITS_PER_SAMPLE; + i2s->channels = I2S_CHANNELS; + i2s->rfs = I2S_RFS; + i2s->bfs = I2S_BFS; +} + +/* + * Gets fdt values for wm8994 config parameters + * + * @param pcodec_info codec information structure + * @param blob FDT blob + * @return int value, 0 for success + */ +static int get_sound_wm8994_values(struct sound_codec_info *pcodec_info) +{ + int error = 0; + + switch (AUDIO_COMPAT) { + case AUDIO_COMPAT_SPI: + debug("%s: Support not added for SPI interface\n", __func__); + return -1; + break; + case AUDIO_COMPAT_I2C: + pcodec_info->i2c_bus = AUDIO_I2C_BUS; + pcodec_info->i2c_dev_addr = AUDIO_I2C_REG; + debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr); + break; + default: + debug("%s: Unknown compat id %d\n", __func__, AUDIO_COMPAT); + return -1; + } + + if (error == -1) { + debug("fail to get wm8994 codec node properties\n"); + return -1; + } + + return 0; +} + +/* + * Gets fdt values for codec config parameters + * + * @param pcodec_info codec information structure + * @param blob FDT blob + * @return int value, 0 for success + */ +static int get_sound_codec_values(struct sound_codec_info *pcodec_info) +{ + int error = 0; + const char *codectype; + + codectype = AUDIO_CODEC; + + if (!strcmp(codectype, "wm8994")) { + pcodec_info->codec_type = CODEC_WM_8994; + error = get_sound_wm8994_values(pcodec_info); + } else { + error = -1; + } + + if (error == -1) { + debug("fail to get sound codec node properties\n"); + return -1; + } + + return 0; +} + +int sound_init(void) +{ + int ret; + struct i2stx_info *pi2s_tx = &g_i2stx_pri; + struct sound_codec_info *pcodec_info = &g_codec_info; + + /* Get the I2S Values */ + get_sound_i2s_values(pi2s_tx); + + /* Get the codec Values */ + if (get_sound_codec_values(pcodec_info) < 0) + return -1; + + ret = i2s_tx_init(pi2s_tx); + if (ret) { + debug("%s: Failed to init i2c transmit: ret=%d\n", __func__, + ret); + return ret; + } + + /* Check the codec type and initialise the same */ + if (pcodec_info->codec_type == CODEC_WM_8994) { + ret = wm8994_init(pcodec_info, WM8994_AIF2, + pi2s_tx->samplingrate, + (pi2s_tx->samplingrate * (pi2s_tx->rfs)), + pi2s_tx->bitspersample, pi2s_tx->channels); + } else { + debug("%s: Unknown code type %d\n", __func__, + pcodec_info->codec_type); + return -1; + } + if (ret) { + debug("%s: Codec init failed\n", __func__); + return -1; + } + + return ret; +} + +/* + * Generates square wave sound data for 1 second + * + * @param data data buffer pointer + * @param size size of the buffer + * @param freq frequency of the wave + */ +static void sound_prepare_buffer(unsigned short *data, int size, uint32_t freq) +{ + const int sample = 48000; + const unsigned short amplitude = 16000; /* between 1 and 32767 */ + const int period = freq ? sample / freq : 0; + const int half = period / 2; + + assert(freq); + + /* Make sure we don't overflow our buffer */ + if (size % 2) + size--; + + while (size) { + int i; + for (i = 0; size && i < half; i++) { + size -= 2; + *data++ = amplitude; + *data++ = amplitude; + } + for (i = 0; size && i < period - half; i++) { + size -= 2; + *data++ = -amplitude; + *data++ = -amplitude; + } + } +} + +int sound_play(uint32_t msec, uint32_t frequency) +{ + unsigned int *data; + unsigned long data_size; + unsigned int ret = 0; + + /*Buffer length computation */ + data_size = g_i2stx_pri.samplingrate * g_i2stx_pri.channels; + data_size *= (g_i2stx_pri.bitspersample / SOUND_BITS_IN_BYTE); + data = malloc(data_size); + + if (data == NULL) { + debug("%s: malloc failed\n", __func__); + return -1; + } + + sound_prepare_buffer((unsigned short *)data, + data_size / sizeof(unsigned short), frequency); + + while (msec >= 1000) { + ret = i2s_transfer_tx_data(&g_i2stx_pri, data, + (data_size / sizeof(int))); + msec -= 1000; + } + if (msec) { + unsigned long size = + (data_size * msec) / (sizeof(int) * 1000); + + ret = i2s_transfer_tx_data(&g_i2stx_pri, data, size); + } + + free(data); + + return ret; +} diff --git a/drivers/sound/wm8994.c b/drivers/sound/wm8994.c new file mode 100644 index 00000000000..293903ada2e --- /dev/null +++ b/drivers/sound/wm8994.c @@ -0,0 +1,792 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * R. Chandrasekar <rcsekar@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <asm/arch/clk.h> +#include <asm/arch/cpu.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <common.h> +#include <div64.h> +#include <i2c.h> +#include <i2s.h> +#include <sound.h> +#include "wm8994.h" +#include "wm8994_registers.h" + +/* defines for wm8994 system clock selection */ +#define SEL_MCLK1 0x00 +#define SEL_MCLK2 0x08 +#define SEL_FLL1 0x10 +#define SEL_FLL2 0x18 + +/* fll config to configure fll */ +struct wm8994_fll_config { + int src; /* Source */ + int in; /* Input frequency in Hz */ + int out; /* output frequency in Hz */ +}; + +/* codec private data */ +struct wm8994_priv { + enum wm8994_type type; /* codec type of wolfson */ + int revision; /* Revision */ + int sysclk[WM8994_MAX_AIF]; /* System clock frequency in Hz */ + int mclk[WM8994_MAX_AIF]; /* master clock frequency in Hz */ + int aifclk[WM8994_MAX_AIF]; /* audio interface clock in Hz */ + struct wm8994_fll_config fll[2]; /* fll config to configure fll */ +}; + +/* wm 8994 supported sampling rate values */ +static unsigned int src_rate[] = { + 8000, 11025, 12000, 16000, 22050, 24000, + 32000, 44100, 48000, 88200, 96000 +}; + +/* op clock divisions */ +static int opclk_divs[] = { 10, 20, 30, 40, 55, 60, 80, 120, 160 }; + +/* lr clock frame size ratio */ +static int fs_ratios[] = { + 64, 128, 192, 256, 348, 512, 768, 1024, 1408, 1536 +}; + +/* bit clock divisors */ +static int bclk_divs[] = { + 10, 15, 20, 30, 40, 50, 60, 80, 110, 120, 160, 220, 240, 320, 440, 480, + 640, 880, 960, 1280, 1760, 1920 +}; + +static struct wm8994_priv g_wm8994_info; +static unsigned char g_wm8994_i2c_dev_addr; + +/* + * Initialise I2C for wm 8994 + * + * @param bus no i2c bus number in which wm8994 is connected + */ +static void wm8994_i2c_init(int bus_no) +{ + i2c_set_bus_num(bus_no); +} + +/* + * Writes value to a device register through i2c + * + * @param reg reg number to be write + * @param data data to be writen to the above registor + * + * @return int value 1 for change, 0 for no change or negative error code. + */ +static int wm8994_i2c_write(unsigned int reg, unsigned short data) +{ + unsigned char val[2]; + + val[0] = (unsigned char)((data >> 8) & 0xff); + val[1] = (unsigned char)(data & 0xff); + debug("Write Addr : 0x%04X, Data : 0x%04X\n", reg, data); + + return i2c_write(g_wm8994_i2c_dev_addr, reg, 2, val, 2); +} + +/* + * Read a value from a device register through i2c + * + * @param reg reg number to be read + * @param data address of read data to be stored + * + * @return int value 0 for success, -1 in case of error. + */ +static unsigned int wm8994_i2c_read(unsigned int reg , unsigned short *data) +{ + unsigned char val[2]; + int ret; + + ret = i2c_read(g_wm8994_i2c_dev_addr, reg, 2, val, 2); + if (ret != 0) { + debug("%s: Error while reading register %#04x\n", + __func__, reg); + return -1; + } + + *data = val[0]; + *data <<= 8; + *data |= val[1]; + + return 0; +} + +/* + * update device register bits through i2c + * + * @param reg codec register + * @param mask register mask + * @param value new value + * + * @return int value 1 if change in the register value, + * 0 for no change or negative error code. + */ +static int wm8994_update_bits(unsigned int reg, unsigned short mask, + unsigned short value) +{ + int change , ret = 0; + unsigned short old, new; + + if (wm8994_i2c_read(reg, &old) != 0) + return -1; + new = (old & ~mask) | (value & mask); + change = (old != new) ? 1 : 0; + if (change) + ret = wm8994_i2c_write(reg, new); + if (ret < 0) + return ret; + + return change; +} + +/* + * Sets i2s set format + * + * @param aif_id Interface ID + * @param fmt i2S format + * + * @return -1 for error and 0 Success. + */ +int wm8994_set_fmt(int aif_id, unsigned int fmt) +{ + int ms_reg; + int aif_reg; + int ms = 0; + int aif = 0; + int aif_clk = 0; + int error = 0; + + switch (aif_id) { + case 1: + ms_reg = WM8994_AIF1_MASTER_SLAVE; + aif_reg = WM8994_AIF1_CONTROL_1; + aif_clk = WM8994_AIF1_CLOCKING_1; + break; + case 2: + ms_reg = WM8994_AIF2_MASTER_SLAVE; + aif_reg = WM8994_AIF2_CONTROL_1; + aif_clk = WM8994_AIF2_CLOCKING_1; + break; + default: + debug("%s: Invalid audio interface selection\n", __func__); + return -1; + } + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + break; + case SND_SOC_DAIFMT_CBM_CFM: + ms = WM8994_AIF1_MSTR; + break; + default: + debug("%s: Invalid i2s master selection\n", __func__); + return -1; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_DSP_B: + aif |= WM8994_AIF1_LRCLK_INV; + case SND_SOC_DAIFMT_DSP_A: + aif |= 0x18; + break; + case SND_SOC_DAIFMT_I2S: + aif |= 0x10; + break; + case SND_SOC_DAIFMT_RIGHT_J: + break; + case SND_SOC_DAIFMT_LEFT_J: + aif |= 0x8; + break; + default: + debug("%s: Invalid i2s format selection\n", __func__); + return -1; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_DSP_A: + case SND_SOC_DAIFMT_DSP_B: + /* frame inversion not valid for DSP modes */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_NF: + aif |= WM8994_AIF1_BCLK_INV; + break; + default: + debug("%s: Invalid i2s frame inverse selection\n", + __func__); + return -1; + } + break; + + case SND_SOC_DAIFMT_I2S: + case SND_SOC_DAIFMT_RIGHT_J: + case SND_SOC_DAIFMT_LEFT_J: + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_IF: + aif |= WM8994_AIF1_BCLK_INV | WM8994_AIF1_LRCLK_INV; + break; + case SND_SOC_DAIFMT_IB_NF: + aif |= WM8994_AIF1_BCLK_INV; + break; + case SND_SOC_DAIFMT_NB_IF: + aif |= WM8994_AIF1_LRCLK_INV; + break; + default: + debug("%s: Invalid i2s clock polarity selection\n", + __func__); + return -1; + } + break; + default: + debug("%s: Invalid i2s format selection\n", __func__); + return -1; + } + + error = wm8994_update_bits(aif_reg, WM8994_AIF1_BCLK_INV | + WM8994_AIF1_LRCLK_INV_MASK | WM8994_AIF1_FMT_MASK, aif); + + error |= wm8994_update_bits(ms_reg, WM8994_AIF1_MSTR_MASK, ms); + error |= wm8994_update_bits(aif_clk, WM8994_AIF1CLK_ENA_MASK, + WM8994_AIF1CLK_ENA); + if (error < 0) { + debug("%s: codec register access error\n", __func__); + return -1; + } + + return 0; +} + +/* + * Sets hw params FOR WM8994 + * + * @param wm8994 wm8994 information pointer + * @param aif_id Audio interface ID + * @param sampling_rate Sampling rate + * @param bits_per_sample Bits per sample + * @param Channels Channels in the given audio input + * + * @return -1 for error and 0 Success. + */ +static int wm8994_hw_params(struct wm8994_priv *wm8994, int aif_id, + unsigned int sampling_rate, unsigned int bits_per_sample, + unsigned int channels) +{ + int aif1_reg; + int aif2_reg; + int bclk_reg; + int bclk = 0; + int rate_reg; + int aif1 = 0; + int aif2 = 0; + int rate_val = 0; + int id = aif_id - 1; + int i, cur_val, best_val, bclk_rate, best; + unsigned short reg_data; + int ret = 0; + + switch (aif_id) { + case 1: + aif1_reg = WM8994_AIF1_CONTROL_1; + aif2_reg = WM8994_AIF1_CONTROL_2; + bclk_reg = WM8994_AIF1_BCLK; + rate_reg = WM8994_AIF1_RATE; + break; + case 2: + aif1_reg = WM8994_AIF2_CONTROL_1; + aif2_reg = WM8994_AIF2_CONTROL_2; + bclk_reg = WM8994_AIF2_BCLK; + rate_reg = WM8994_AIF2_RATE; + break; + default: + return -1; + } + + bclk_rate = sampling_rate * 32; + switch (bits_per_sample) { + case 16: + bclk_rate *= 16; + break; + case 20: + bclk_rate *= 20; + aif1 |= 0x20; + break; + case 24: + bclk_rate *= 24; + aif1 |= 0x40; + break; + case 32: + bclk_rate *= 32; + aif1 |= 0x60; + break; + default: + return -1; + } + + /* Try to find an appropriate sample rate; look for an exact match. */ + for (i = 0; i < ARRAY_SIZE(src_rate); i++) + if (src_rate[i] == sampling_rate) + break; + + if (i == ARRAY_SIZE(src_rate)) { + debug("%s: Could not get the best matching samplingrate\n", + __func__); + return -1; + } + + rate_val |= i << WM8994_AIF1_SR_SHIFT; + + /* AIFCLK/fs ratio; look for a close match in either direction */ + best = 0; + best_val = abs((fs_ratios[0] * sampling_rate) + - wm8994->aifclk[id]); + + for (i = 1; i < ARRAY_SIZE(fs_ratios); i++) { + cur_val = abs((fs_ratios[i] * sampling_rate) + - wm8994->aifclk[id]); + if (cur_val >= best_val) + continue; + best = i; + best_val = cur_val; + } + + rate_val |= best; + + /* + * We may not get quite the right frequency if using + * approximate clocks so look for the closest match that is + * higher than the target (we need to ensure that there enough + * BCLKs to clock out the samples). + */ + best = 0; + for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) { + cur_val = (wm8994->aifclk[id] * 10 / bclk_divs[i]) - bclk_rate; + if (cur_val < 0) /* BCLK table is sorted */ + break; + best = i; + } + + if (i == ARRAY_SIZE(bclk_divs)) { + debug("%s: Could not get the best matching bclk division\n", + __func__); + return -1; + } + + bclk_rate = wm8994->aifclk[id] * 10 / bclk_divs[best]; + bclk |= best << WM8994_AIF1_BCLK_DIV_SHIFT; + + if (wm8994_i2c_read(aif1_reg, ®_data) != 0) { + debug("%s: AIF1 register read Failed\n", __func__); + return -1; + } + + if ((channels == 1) && ((reg_data & 0x18) == 0x18)) + aif2 |= WM8994_AIF1_MONO; + + if (wm8994->aifclk[id] == 0) { + debug("%s:Audio interface clock not set\n", __func__); + return -1; + } + + ret = wm8994_update_bits(aif1_reg, WM8994_AIF1_WL_MASK, aif1); + ret |= wm8994_update_bits(aif2_reg, WM8994_AIF1_MONO, aif2); + ret |= wm8994_update_bits(bclk_reg, WM8994_AIF1_BCLK_DIV_MASK, bclk); + ret |= wm8994_update_bits(rate_reg, WM8994_AIF1_SR_MASK | + WM8994_AIF1CLK_RATE_MASK, rate_val); + + debug("rate vale = %x , bclk val= %x\n", rate_val, bclk); + + if (ret < 0) { + debug("%s: codec register access error\n", __func__); + return -1; + } + + return 0; +} + +/* + * Configures Audio interface Clock + * + * @param wm8994 wm8994 information pointer + * @param aif Audio Interface ID + * + * @return -1 for error and 0 Success. + */ +static int configure_aif_clock(struct wm8994_priv *wm8994, int aif) +{ + int rate; + int reg1 = 0; + int offset; + int ret; + + /* AIF(1/0) register adress offset calculated */ + if (aif) + offset = 4; + else + offset = 0; + + switch (wm8994->sysclk[aif]) { + case WM8994_SYSCLK_MCLK1: + reg1 |= SEL_MCLK1; + rate = wm8994->mclk[0]; + break; + + case WM8994_SYSCLK_MCLK2: + reg1 |= SEL_MCLK2; + rate = wm8994->mclk[1]; + break; + + case WM8994_SYSCLK_FLL1: + reg1 |= SEL_FLL1; + rate = wm8994->fll[0].out; + break; + + case WM8994_SYSCLK_FLL2: + reg1 |= SEL_FLL2; + rate = wm8994->fll[1].out; + break; + + default: + debug("%s: Invalid input clock selection [%d]\n", + __func__, wm8994->sysclk[aif]); + return -1; + } + + /* if input clock frequenct is more than 135Mhz then divide */ + if (rate >= WM8994_MAX_INPUT_CLK_FREQ) { + rate /= 2; + reg1 |= WM8994_AIF1CLK_DIV; + } + + wm8994->aifclk[aif] = rate; + + ret = wm8994_update_bits(WM8994_AIF1_CLOCKING_1 + offset, + WM8994_AIF1CLK_SRC_MASK | WM8994_AIF1CLK_DIV, + reg1); + + ret |= wm8994_update_bits(WM8994_CLOCKING_1, + WM8994_SYSCLK_SRC | WM8994_AIF2DSPCLK_ENA_MASK | + WM8994_SYSDSPCLK_ENA_MASK, WM8994_SYSCLK_SRC | + WM8994_AIF2DSPCLK_ENA | WM8994_SYSDSPCLK_ENA); + + if (ret < 0) { + debug("%s: codec register access error\n", __func__); + return -1; + } + + return 0; +} + +/* + * Configures Audio interface for the given frequency + * + * @param wm8994 wm8994 information + * @param aif_id Audio Interface + * @param clk_id Input Clock ID + * @param freq Sampling frequency in Hz + * + * @return -1 for error and 0 success. + */ +static int wm8994_set_sysclk(struct wm8994_priv *wm8994, int aif_id, + int clk_id, unsigned int freq) +{ + int i; + int ret = 0; + + wm8994->sysclk[aif_id - 1] = clk_id; + + switch (clk_id) { + case WM8994_SYSCLK_MCLK1: + wm8994->mclk[0] = freq; + if (aif_id == 2) { + ret = wm8994_update_bits(WM8994_AIF1_CLOCKING_2 , + WM8994_AIF2DAC_DIV_MASK , 0); + } + break; + + case WM8994_SYSCLK_MCLK2: + /* TODO: Set GPIO AF */ + wm8994->mclk[1] = freq; + break; + + case WM8994_SYSCLK_FLL1: + case WM8994_SYSCLK_FLL2: + break; + + case WM8994_SYSCLK_OPCLK: + /* + * Special case - a division (times 10) is given and + * no effect on main clocking. + */ + if (freq) { + for (i = 0; i < ARRAY_SIZE(opclk_divs); i++) + if (opclk_divs[i] == freq) + break; + if (i == ARRAY_SIZE(opclk_divs)) { + debug("%s frequency divisor not found\n", + __func__); + return -1; + } + ret = wm8994_update_bits(WM8994_CLOCKING_2, + WM8994_OPCLK_DIV_MASK, i); + ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_2, + WM8994_OPCLK_ENA, WM8994_OPCLK_ENA); + } else { + ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_2, + WM8994_OPCLK_ENA, 0); + } + + default: + debug("%s Invalid input clock selection [%d]\n", + __func__, clk_id); + return -1; + } + + ret |= configure_aif_clock(wm8994, aif_id - 1); + + if (ret < 0) { + debug("%s: codec register access error\n", __func__); + return -1; + } + + return 0; +} + +/* + * Initializes Volume for AIF2 to HP path + * + * @returns -1 for error and 0 Success. + * + */ +static int wm8994_init_volume_aif2_dac1(void) +{ + int ret; + + /* Unmute AIF2DAC */ + ret = wm8994_update_bits(WM8994_AIF2_DAC_FILTERS_1, + WM8994_AIF2DAC_MUTE_MASK, 0); + + + ret |= wm8994_update_bits(WM8994_AIF2_DAC_LEFT_VOLUME, + WM8994_AIF2DAC_VU_MASK | WM8994_AIF2DACL_VOL_MASK, + WM8994_AIF2DAC_VU | 0xff); + + ret |= wm8994_update_bits(WM8994_AIF2_DAC_RIGHT_VOLUME, + WM8994_AIF2DAC_VU_MASK | WM8994_AIF2DACR_VOL_MASK, + WM8994_AIF2DAC_VU | 0xff); + + + ret |= wm8994_update_bits(WM8994_DAC1_LEFT_VOLUME, + WM8994_DAC1_VU_MASK | WM8994_DAC1L_VOL_MASK | + WM8994_DAC1L_MUTE_MASK, WM8994_DAC1_VU | 0xc0); + + ret |= wm8994_update_bits(WM8994_DAC1_RIGHT_VOLUME, + WM8994_DAC1_VU_MASK | WM8994_DAC1R_VOL_MASK | + WM8994_DAC1R_MUTE_MASK, WM8994_DAC1_VU | 0xc0); + /* Head Phone Volume */ + ret |= wm8994_i2c_write(WM8994_LEFT_OUTPUT_VOLUME, 0x12D); + ret |= wm8994_i2c_write(WM8994_RIGHT_OUTPUT_VOLUME, 0x12D); + + if (ret < 0) { + debug("%s: codec register access error\n", __func__); + return -1; + } + + return 0; +} + +/* + * Intialise wm8994 codec device + * + * @param wm8994 wm8994 information + * + * @returns -1 for error and 0 Success. + */ +static int wm8994_device_init(struct wm8994_priv *wm8994) +{ + const char *devname; + unsigned short reg_data; + int ret; + + wm8994_i2c_write(WM8994_SOFTWARE_RESET, WM8994_SW_RESET);/* Reset */ + + ret = wm8994_i2c_read(WM8994_SOFTWARE_RESET, ®_data); + if (ret < 0) { + debug("Failed to read ID register\n"); + goto err; + } + + if (reg_data == WM8994_ID) { + devname = "WM8994"; + debug("Device registered as type %d\n", wm8994->type); + wm8994->type = WM8994; + } else { + debug("Device is not a WM8994, ID is %x\n", ret); + ret = -1; + goto err; + } + + ret = wm8994_i2c_read(WM8994_CHIP_REVISION, ®_data); + if (ret < 0) { + debug("Failed to read revision register: %d\n", ret); + goto err; + } + wm8994->revision = reg_data; + debug("%s revision %c\n", devname, 'A' + wm8994->revision); + + /* VMID Selection */ + ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_1, + WM8994_VMID_SEL_MASK | WM8994_BIAS_ENA_MASK, 0x3); + + /* Charge Pump Enable */ + ret |= wm8994_update_bits(WM8994_CHARGE_PUMP_1, WM8994_CP_ENA_MASK, + WM8994_CP_ENA); + + /* Head Phone Power Enable */ + ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_1, + WM8994_HPOUT1L_ENA_MASK, WM8994_HPOUT1L_ENA); + + ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_1, + WM8994_HPOUT1R_ENA_MASK, WM8994_HPOUT1R_ENA); + + /* Power enable for AIF2 and DAC1 */ + ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_5, + WM8994_AIF2DACL_ENA_MASK | WM8994_AIF2DACR_ENA_MASK | + WM8994_DAC1L_ENA_MASK | WM8994_DAC1R_ENA_MASK, + WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA | WM8994_DAC1L_ENA | + WM8994_DAC1R_ENA); + + /* Head Phone Initialisation */ + ret |= wm8994_update_bits(WM8994_ANALOGUE_HP_1, + WM8994_HPOUT1L_DLY_MASK | WM8994_HPOUT1R_DLY_MASK, + WM8994_HPOUT1L_DLY | WM8994_HPOUT1R_DLY); + + ret |= wm8994_update_bits(WM8994_DC_SERVO_1, + WM8994_DCS_ENA_CHAN_0_MASK | + WM8994_DCS_ENA_CHAN_1_MASK , WM8994_DCS_ENA_CHAN_0 | + WM8994_DCS_ENA_CHAN_1); + + ret |= wm8994_update_bits(WM8994_ANALOGUE_HP_1, + WM8994_HPOUT1L_DLY_MASK | + WM8994_HPOUT1R_DLY_MASK | WM8994_HPOUT1L_OUTP_MASK | + WM8994_HPOUT1R_OUTP_MASK | + WM8994_HPOUT1L_RMV_SHORT_MASK | + WM8994_HPOUT1R_RMV_SHORT_MASK, WM8994_HPOUT1L_DLY | + WM8994_HPOUT1R_DLY | WM8994_HPOUT1L_OUTP | + WM8994_HPOUT1R_OUTP | WM8994_HPOUT1L_RMV_SHORT | + WM8994_HPOUT1R_RMV_SHORT); + + /* MIXER Config DAC1 to HP */ + ret |= wm8994_update_bits(WM8994_OUTPUT_MIXER_1, + WM8994_DAC1L_TO_HPOUT1L_MASK, WM8994_DAC1L_TO_HPOUT1L); + + ret |= wm8994_update_bits(WM8994_OUTPUT_MIXER_2, + WM8994_DAC1R_TO_HPOUT1R_MASK, WM8994_DAC1R_TO_HPOUT1R); + + /* Routing AIF2 to DAC1 */ + ret |= wm8994_update_bits(WM8994_DAC1_LEFT_MIXER_ROUTING, + WM8994_AIF2DACL_TO_DAC1L_MASK, + WM8994_AIF2DACL_TO_DAC1L); + + ret |= wm8994_update_bits(WM8994_DAC1_RIGHT_MIXER_ROUTING, + WM8994_AIF2DACR_TO_DAC1R_MASK, + WM8994_AIF2DACR_TO_DAC1R); + + /* GPIO Settings for AIF2 */ + /* B CLK */ + ret |= wm8994_update_bits(WM8994_GPIO_3, WM8994_GPIO_DIR_MASK | + WM8994_GPIO_FUNCTION_MASK , + WM8994_GPIO_DIR_OUTPUT | + WM8994_GPIO_FUNCTION_I2S_CLK); + + /* LR CLK */ + ret |= wm8994_update_bits(WM8994_GPIO_4, WM8994_GPIO_DIR_MASK | + WM8994_GPIO_FUNCTION_MASK, + WM8994_GPIO_DIR_OUTPUT | + WM8994_GPIO_FUNCTION_I2S_CLK); + + /* DATA */ + ret |= wm8994_update_bits(WM8994_GPIO_5, WM8994_GPIO_DIR_MASK | + WM8994_GPIO_FUNCTION_MASK, + WM8994_GPIO_DIR_OUTPUT | + WM8994_GPIO_FUNCTION_I2S_CLK); + + ret |= wm8994_init_volume_aif2_dac1(); + if (ret < 0) + goto err; + + debug("%s: Codec chip init ok\n", __func__); + return 0; +err: + debug("%s: Codec chip init error\n", __func__); + return -1; +} + +/*wm8994 Device Initialisation */ +int wm8994_init(struct sound_codec_info *pcodec_info, + enum en_audio_interface aif_id, + int sampling_rate, int mclk_freq, + int bits_per_sample, unsigned int channels) +{ + int ret = 0; + + /* shift the device address by 1 for 7 bit addressing */ + g_wm8994_i2c_dev_addr = pcodec_info->i2c_dev_addr; + wm8994_i2c_init(pcodec_info->i2c_bus); + + if (pcodec_info->codec_type == CODEC_WM_8994) + g_wm8994_info.type = WM8994; + else { + debug("%s: Codec id [%d] not defined\n", __func__, + pcodec_info->codec_type); + return -1; + } + + ret = wm8994_device_init(&g_wm8994_info); + if (ret < 0) { + debug("%s: wm8994 codec chip init failed\n", __func__); + return ret; + } + + ret = wm8994_set_sysclk(&g_wm8994_info, aif_id, WM8994_SYSCLK_MCLK1, + mclk_freq); + if (ret < 0) { + debug("%s: wm8994 codec set sys clock failed\n", __func__); + return ret; + } + + ret = wm8994_hw_params(&g_wm8994_info, aif_id, sampling_rate, + bits_per_sample, channels); + + if (ret == 0) { + ret = wm8994_set_fmt(aif_id, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS); + } + return ret; +} diff --git a/drivers/sound/wm8994.h b/drivers/sound/wm8994.h new file mode 100644 index 00000000000..a8f0de18c5b --- /dev/null +++ b/drivers/sound/wm8994.h @@ -0,0 +1,87 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * R. Chadrasekar <rcsekar@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __WM8994_H__ +#define __WM8994_H__ + +/* Sources for AIF1/2 SYSCLK - use with set_dai_sysclk() */ +#define WM8994_SYSCLK_MCLK1 1 +#define WM8994_SYSCLK_MCLK2 2 +#define WM8994_SYSCLK_FLL1 3 +#define WM8994_SYSCLK_FLL2 4 + +/* Avilable audi interface ports in wm8994 codec */ +enum en_audio_interface { + WM8994_AIF1 = 1, + WM8994_AIF2, + WM8994_AIF3 +}; + +/* OPCLK is also configured with set_dai_sysclk, specify division*10 as rate. */ +#define WM8994_SYSCLK_OPCLK 5 + +#define WM8994_FLL1 1 +#define WM8994_FLL2 2 + +#define WM8994_FLL_SRC_MCLK1 1 +#define WM8994_FLL_SRC_MCLK2 2 +#define WM8994_FLL_SRC_LRCLK 3 +#define WM8994_FLL_SRC_BCLK 4 + +/* maximum available digital interfac in the dac to configure */ +#define WM8994_MAX_AIF 2 + +#define WM8994_MAX_INPUT_CLK_FREQ 13500000 +#define WM8994_ID 0x8994 + +enum wm8994_vmid_mode { + WM8994_VMID_NORMAL, + WM8994_VMID_FORCE, +}; + +/* wm 8994 family devices */ +enum wm8994_type { + WM8994 = 0, + WM8958 = 1, + WM1811 = 2, +}; + +/* + * intialise wm8994 sound codec device for the given configuration + * + * @param pcodec_info pointer value of the sound codec info structure + * parsed from device tree + * @param aif_id enum value of codec interface port in which + * soc i2s is connected + * @param sampling_rate Sampling rate ranges between from 8khz to 96khz + * @param mclk_freq Master clock frequency. + * @param bits_per_sample bits per Sample can be 16 or 24 + * @param channels Number of channnels, maximum 2 + * + * @returns -1 for error and 0 Success. + */ +int wm8994_init(struct sound_codec_info *pcodec_info, + enum en_audio_interface aif_id, + int sampling_rate, int mclk_freq, + int bits_per_sample, unsigned int channels); +#endif /*__WM8994_H__ */ diff --git a/drivers/sound/wm8994_registers.h b/drivers/sound/wm8994_registers.h new file mode 100644 index 00000000000..f455b112f08 --- /dev/null +++ b/drivers/sound/wm8994_registers.h @@ -0,0 +1,299 @@ +/* + * (C) Copyright 2012 Samsung Electronics + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __WM8994_REGISTERS_H__ +#define __WM8994_REGISTERS_H__ + +/* + * Register values. + */ +#define WM8994_SOFTWARE_RESET 0x00 +#define WM8994_POWER_MANAGEMENT_1 0x01 +#define WM8994_POWER_MANAGEMENT_2 0x02 +#define WM8994_POWER_MANAGEMENT_5 0x05 +#define WM8994_LEFT_OUTPUT_VOLUME 0x1C +#define WM8994_RIGHT_OUTPUT_VOLUME 0x1D +#define WM8994_OUTPUT_MIXER_1 0x2D +#define WM8994_OUTPUT_MIXER_2 0x2E +#define WM8994_CHARGE_PUMP_1 0x4C +#define WM8994_DC_SERVO_1 0x54 +#define WM8994_ANALOGUE_HP_1 0x60 +#define WM8994_CHIP_REVISION 0x100 +#define WM8994_AIF1_CLOCKING_1 0x200 +#define WM8994_AIF1_CLOCKING_2 0x201 +#define WM8994_AIF2_CLOCKING_1 0x204 +#define WM8994_CLOCKING_1 0x208 +#define WM8994_CLOCKING_2 0x209 +#define WM8994_AIF1_RATE 0x210 +#define WM8994_AIF2_RATE 0x211 +#define WM8994_RATE_STATUS 0x212 +#define WM8994_AIF1_CONTROL_1 0x300 +#define WM8994_AIF1_CONTROL_2 0x301 +#define WM8994_AIF1_MASTER_SLAVE 0x302 +#define WM8994_AIF1_BCLK 0x303 +#define WM8994_AIF2_CONTROL_1 0x310 +#define WM8994_AIF2_CONTROL_2 0x311 +#define WM8994_AIF2_MASTER_SLAVE 0x312 +#define WM8994_AIF2_BCLK 0x313 +#define WM8994_AIF2_DAC_LEFT_VOLUME 0x502 +#define WM8994_AIF2_DAC_RIGHT_VOLUME 0x503 +#define WM8994_AIF2_DAC_FILTERS_1 0x520 +#define WM8994_DAC1_LEFT_MIXER_ROUTING 0x601 +#define WM8994_DAC1_RIGHT_MIXER_ROUTING 0x602 +#define WM8994_DAC1_LEFT_VOLUME 0x610 +#define WM8994_DAC1_RIGHT_VOLUME 0x611 +#define WM8994_GPIO_3 0x702 +#define WM8994_GPIO_4 0x703 +#define WM8994_GPIO_5 0x704 + +/* + * Field Definitions. + */ + +/* + * R0 (0x00) - Software Reset + */ +/* SW_RESET */ +#define WM8994_SW_RESET 1 +/* + * R1 (0x01) - Power Management (1) + */ +/* HPOUT1L_ENA */ +#define WM8994_HPOUT1L_ENA 0x0200 +/* HPOUT1L_ENA */ +#define WM8994_HPOUT1L_ENA_MASK 0x0200 +/* HPOUT1R_ENA */ +#define WM8994_HPOUT1R_ENA 0x0100 +/* HPOUT1R_ENA */ +#define WM8994_HPOUT1R_ENA_MASK 0x0100 +/* VMID_SEL - [2:1] */ +#define WM8994_VMID_SEL_MASK 0x0006 +/* BIAS_ENA */ +#define WM8994_BIAS_ENA 0x0001 +/* BIAS_ENA */ +#define WM8994_BIAS_ENA_MASK 0x0001 + +/* + * R2 (0x02) - Power Management (2) + */ +/* OPCLK_ENA */ +#define WM8994_OPCLK_ENA 0x0800 + +/* + * R5 (0x05) - Power Management (5) + */ +/* AIF2DACL_ENA */ +#define WM8994_AIF2DACL_ENA 0x2000 +#define WM8994_AIF2DACL_ENA_MASK 0x2000 +/* AIF2DACR_ENA */ +#define WM8994_AIF2DACR_ENA 0x1000 +#define WM8994_AIF2DACR_ENA_MASK 0x1000 +/* DAC1L_ENA */ +#define WM8994_DAC1L_ENA 0x0002 +#define WM8994_DAC1L_ENA_MASK 0x0002 +/* DAC1R_ENA */ +#define WM8994_DAC1R_ENA 0x0001 +#define WM8994_DAC1R_ENA_MASK 0x0001 + +/* + * R45 (0x2D) - Output Mixer (1) + */ +/* DAC1L_TO_HPOUT1L */ +#define WM8994_DAC1L_TO_HPOUT1L 0x0100 +#define WM8994_DAC1L_TO_HPOUT1L_MASK 0x0100 + +/* + * R46 (0x2E) - Output Mixer (2) + */ +/* DAC1R_TO_HPOUT1R */ +#define WM8994_DAC1R_TO_HPOUT1R 0x0100 +#define WM8994_DAC1R_TO_HPOUT1R_MASK 0x0100 + +/* + * R76 (0x4C) - Charge Pump (1) + */ +/* CP_ENA */ +#define WM8994_CP_ENA 0x8000 +#define WM8994_CP_ENA_MASK 0x8000 +/* + * R84 (0x54) - DC Servo (1) + */ +/* DCS_ENA_CHAN_1 */ +#define WM8994_DCS_ENA_CHAN_1 0x0002 +#define WM8994_DCS_ENA_CHAN_1_MASK 0x0002 +/* DCS_ENA_CHAN_0 */ +#define WM8994_DCS_ENA_CHAN_0 0x0001 +#define WM8994_DCS_ENA_CHAN_0_MASK 0x0001 + +/* + * R96 (0x60) - Analogue HP (1) + */ +/* HPOUT1L_RMV_SHORT */ +#define WM8994_HPOUT1L_RMV_SHORT 0x0080 +#define WM8994_HPOUT1L_RMV_SHORT_MASK 0x0080 +/* HPOUT1L_OUTP */ +#define WM8994_HPOUT1L_OUTP 0x0040 +#define WM8994_HPOUT1L_OUTP_MASK 0x0040 +/* HPOUT1L_DLY */ +#define WM8994_HPOUT1L_DLY 0x0020 +#define WM8994_HPOUT1L_DLY_MASK 0x0020 +/* HPOUT1R_RMV_SHORT */ +#define WM8994_HPOUT1R_RMV_SHORT 0x0008 +#define WM8994_HPOUT1R_RMV_SHORT_MASK 0x0008 +/* HPOUT1R_OUTP */ +#define WM8994_HPOUT1R_OUTP 0x0004 +#define WM8994_HPOUT1R_OUTP_MASK 0x0004 +/* HPOUT1R_DLY */ +#define WM8994_HPOUT1R_DLY 0x0002 +#define WM8994_HPOUT1R_DLY_MASK 0x0002 + +/* + * R512 (0x200) - AIF1 Clocking (1) + */ +/* AIF1CLK_SRC - [4:3] */ +#define WM8994_AIF1CLK_SRC_MASK 0x0018 +/* AIF1CLK_DIV */ +#define WM8994_AIF1CLK_DIV 0x0002 +/* AIF1CLK_ENA */ +#define WM8994_AIF1CLK_ENA 0x0001 +#define WM8994_AIF1CLK_ENA_MASK 0x0001 + +/* + * R517 (0x205) - AIF2 Clocking (2) + */ +/* AIF2DAC_DIV - [5:3] */ +#define WM8994_AIF2DAC_DIV_MASK 0x0038 + +/* + * R520 (0x208) - Clocking (1) + */ +/* AIF2DSPCLK_ENA */ +#define WM8994_AIF2DSPCLK_ENA 0x0004 +#define WM8994_AIF2DSPCLK_ENA_MASK 0x0004 +/* SYSDSPCLK_ENA */ +#define WM8994_SYSDSPCLK_ENA 0x0002 +#define WM8994_SYSDSPCLK_ENA_MASK 0x0002 +/* SYSCLK_SRC */ +#define WM8994_SYSCLK_SRC 0x0001 + +/* + * R521 (0x209) - Clocking (2) + */ +/* OPCLK_DIV - [2:0] */ +#define WM8994_OPCLK_DIV_MASK 0x0007 + +/* + * R528 (0x210) - AIF1 Rate + */ +/* AIF1_SR - [7:4] */ +#define WM8994_AIF1_SR_MASK 0x00F0 +#define WM8994_AIF1_SR_SHIFT 4 +/* AIF1CLK_RATE - [3:0] */ +#define WM8994_AIF1CLK_RATE_MASK 0x000F + +/* + * R768 (0x300) - AIF1 Control (1) + */ +/* AIF1_BCLK_INV */ +#define WM8994_AIF1_BCLK_INV 0x0100 +/* AIF1_LRCLK_INV */ +#define WM8994_AIF1_LRCLK_INV 0x0080 +#define WM8994_AIF1_LRCLK_INV_MASK 0x0080 +/* AIF1_WL - [6:5] */ +#define WM8994_AIF1_WL_MASK 0x0060 +/* AIF1_FMT - [4:3] */ +#define WM8994_AIF1_FMT_MASK 0x0018 + +/* + * R769 (0x301) - AIF1 Control (2) + */ +/* AIF1_MONO */ +#define WM8994_AIF1_MONO 0x0100 + +/* + * R770 (0x302) - AIF1 Master/Slave + */ +/* AIF1_MSTR */ +#define WM8994_AIF1_MSTR 0x4000 +#define WM8994_AIF1_MSTR_MASK 0x4000 + +/* + * R771 (0x303) - AIF1 BCLK + */ +/* AIF1_BCLK_DIV - [8:4] */ +#define WM8994_AIF1_BCLK_DIV_MASK 0x01F0 +#define WM8994_AIF1_BCLK_DIV_SHIFT 4 + +/* + * R1282 (0x502) - AIF2 DAC Left Volume + */ +/* AIF2DAC_VU */ +#define WM8994_AIF2DAC_VU 0x0100 +#define WM8994_AIF2DAC_VU_MASK 0x0100 +/* AIF2DACL_VOL - [7:0] */ +#define WM8994_AIF2DACL_VOL_MASK 0x00FF + +/* + * R1283 (0x503) - AIF2 DAC Right Volume + */ +/* AIF2DACR_VOL - [7:0] */ +#define WM8994_AIF2DACR_VOL_MASK 0x00FF + +/* + * R1312 (0x520) - AIF2 DAC Filters (1) + */ +/* AIF2DAC_MUTE */ +#define WM8994_AIF2DAC_MUTE_MASK 0x0200 + +/* + * R1537 (0x601) - DAC1 Left Mixer Routing + */ +/* AIF2DACL_TO_DAC1L */ +#define WM8994_AIF2DACL_TO_DAC1L 0x0004 +#define WM8994_AIF2DACL_TO_DAC1L_MASK 0x0004 + +/* + * R1538 (0x602) - DAC1 Right Mixer Routing + */ +/* AIF2DACR_TO_DAC1R */ +#define WM8994_AIF2DACR_TO_DAC1R 0x0004 +#define WM8994_AIF2DACR_TO_DAC1R_MASK 0x0004 + +/* + * R1552 (0x610) - DAC1 Left Volume + */ +/* DAC1L_MUTE */ +#define WM8994_DAC1L_MUTE_MASK 0x0200 +/* DAC1_VU */ +#define WM8994_DAC1_VU 0x0100 +#define WM8994_DAC1_VU_MASK 0x0100 +/* DAC1L_VOL - [7:0] */ +#define WM8994_DAC1L_VOL_MASK 0x00FF + +/* + * R1553 (0x611) - DAC1 Right Volume + */ +/* DAC1R_MUTE */ +#define WM8994_DAC1R_MUTE_MASK 0x0200 +/* DAC1R_VOL - [7:0] */ +#define WM8994_DAC1R_VOL_MASK 0x00FF + +/* + * GPIO + */ +/* OUTPUT PIN */ +#define WM8994_GPIO_DIR_OUTPUT 0x8000 +/* GPIO PIN MASK */ +#define WM8994_GPIO_DIR_MASK 0xFFE0 +/* I2S CLK */ +#define WM8994_GPIO_FUNCTION_I2S_CLK 0x0000 +/* GPn FN */ +#define WM8994_GPIO_FUNCTION_MASK 0x001F +#endif diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index f0b82c67f5b..824d357d948 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -34,6 +34,7 @@ COBJS-$(CONFIG_BFIN_SPI) += bfin_spi.o COBJS-$(CONFIG_CF_SPI) += cf_spi.o COBJS-$(CONFIG_CF_QSPI) += cf_qspi.o COBJS-$(CONFIG_DAVINCI_SPI) += davinci_spi.o +COBJS-$(CONFIG_EXYNOS_SPI) += exynos_spi.o COBJS-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o COBJS-$(CONFIG_MPC52XX_SPI) += mpc52xx_spi.o COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o diff --git a/drivers/spi/exynos_spi.c b/drivers/spi/exynos_spi.c new file mode 100644 index 00000000000..3e6c18f87f1 --- /dev/null +++ b/drivers/spi/exynos_spi.c @@ -0,0 +1,367 @@ +/* + * (C) Copyright 2012 SAMSUNG Electronics + * Padmavathi Venna <padma.v@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <common.h> +#include <malloc.h> +#include <spi.h> +#include <asm/arch/clk.h> +#include <asm/arch/clock.h> +#include <asm/arch/cpu.h> +#include <asm/arch/gpio.h> +#include <asm/arch/pinmux.h> +#include <asm/arch-exynos/spi.h> +#include <asm/io.h> + +/* Information about each SPI controller */ +struct spi_bus { + enum periph_id periph_id; + s32 frequency; /* Default clock frequency, -1 for none */ + struct exynos_spi *regs; + int inited; /* 1 if this bus is ready for use */ +}; + +/* A list of spi buses that we know about */ +static struct spi_bus spi_bus[EXYNOS5_SPI_NUM_CONTROLLERS]; + +struct exynos_spi_slave { + struct spi_slave slave; + struct exynos_spi *regs; + unsigned int freq; /* Default frequency */ + unsigned int mode; + enum periph_id periph_id; /* Peripheral ID for this device */ + unsigned int fifo_size; +}; + +static struct spi_bus *spi_get_bus(unsigned dev_index) +{ + if (dev_index < EXYNOS5_SPI_NUM_CONTROLLERS) + return &spi_bus[dev_index]; + debug("%s: invalid bus %d", __func__, dev_index); + + return NULL; +} + +static inline struct exynos_spi_slave *to_exynos_spi(struct spi_slave *slave) +{ + return container_of(slave, struct exynos_spi_slave, slave); +} + +/** + * Setup the driver private data + * + * @param bus ID of the bus that the slave is attached to + * @param cs ID of the chip select connected to the slave + * @param max_hz Required spi frequency + * @param mode Required spi mode (clk polarity, clk phase and + * master or slave) + * @return new device or NULL + */ +struct spi_slave *spi_setup_slave(unsigned int busnum, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + struct exynos_spi_slave *spi_slave; + struct spi_bus *bus; + + if (!spi_cs_is_valid(busnum, cs)) { + debug("%s: Invalid bus/chip select %d, %d\n", __func__, + busnum, cs); + return NULL; + } + + spi_slave = malloc(sizeof(*spi_slave)); + if (!spi_slave) { + debug("%s: Could not allocate spi_slave\n", __func__); + return NULL; + } + + bus = &spi_bus[busnum]; + spi_slave->slave.bus = busnum; + spi_slave->slave.cs = cs; + spi_slave->regs = bus->regs; + spi_slave->mode = mode; + spi_slave->periph_id = bus->periph_id; + if (bus->periph_id == PERIPH_ID_SPI1 || + bus->periph_id == PERIPH_ID_SPI2) + spi_slave->fifo_size = 64; + else + spi_slave->fifo_size = 256; + + spi_slave->freq = bus->frequency; + if (max_hz) + spi_slave->freq = min(max_hz, spi_slave->freq); + + return &spi_slave->slave; +} + +/** + * Free spi controller + * + * @param slave Pointer to spi_slave to which controller has to + * communicate with + */ +void spi_free_slave(struct spi_slave *slave) +{ + struct exynos_spi_slave *spi_slave = to_exynos_spi(slave); + + free(spi_slave); +} + +/** + * Flush spi tx, rx fifos and reset the SPI controller + * + * @param slave Pointer to spi_slave to which controller has to + * communicate with + */ +static void spi_flush_fifo(struct spi_slave *slave) +{ + struct exynos_spi_slave *spi_slave = to_exynos_spi(slave); + struct exynos_spi *regs = spi_slave->regs; + + clrsetbits_le32(®s->ch_cfg, SPI_CH_HS_EN, SPI_CH_RST); + clrbits_le32(®s->ch_cfg, SPI_CH_RST); + setbits_le32(®s->ch_cfg, SPI_TX_CH_ON | SPI_RX_CH_ON); +} + +/** + * Initialize the spi base registers, set the required clock frequency and + * initialize the gpios + * + * @param slave Pointer to spi_slave to which controller has to + * communicate with + * @return zero on success else a negative value + */ +int spi_claim_bus(struct spi_slave *slave) +{ + struct exynos_spi_slave *spi_slave = to_exynos_spi(slave); + struct exynos_spi *regs = spi_slave->regs; + u32 reg = 0; + int ret; + + ret = set_spi_clk(spi_slave->periph_id, + spi_slave->freq); + if (ret < 0) { + debug("%s: Failed to setup spi clock\n", __func__); + return ret; + } + + exynos_pinmux_config(spi_slave->periph_id, PINMUX_FLAG_NONE); + + spi_flush_fifo(slave); + + reg = readl(®s->ch_cfg); + reg &= ~(SPI_CH_CPHA_B | SPI_CH_CPOL_L); + + if (spi_slave->mode & SPI_CPHA) + reg |= SPI_CH_CPHA_B; + + if (spi_slave->mode & SPI_CPOL) + reg |= SPI_CH_CPOL_L; + + writel(reg, ®s->ch_cfg); + writel(SPI_FB_DELAY_180, ®s->fb_clk); + + return 0; +} + +/** + * Reset the spi H/W and flush the tx and rx fifos + * + * @param slave Pointer to spi_slave to which controller has to + * communicate with + */ +void spi_release_bus(struct spi_slave *slave) +{ + spi_flush_fifo(slave); +} + +static void spi_get_fifo_levels(struct exynos_spi *regs, + int *rx_lvl, int *tx_lvl) +{ + uint32_t spi_sts = readl(®s->spi_sts); + + *rx_lvl = (spi_sts >> SPI_RX_LVL_OFFSET) & SPI_FIFO_LVL_MASK; + *tx_lvl = (spi_sts >> SPI_TX_LVL_OFFSET) & SPI_FIFO_LVL_MASK; +} + +/** + * If there's something to transfer, do a software reset and set a + * transaction size. + * + * @param regs SPI peripheral registers + * @param count Number of bytes to transfer + */ +static void spi_request_bytes(struct exynos_spi *regs, int count) +{ + assert(count && count < (1 << 16)); + setbits_le32(®s->ch_cfg, SPI_CH_RST); + clrbits_le32(®s->ch_cfg, SPI_CH_RST); + writel(count | SPI_PACKET_CNT_EN, ®s->pkt_cnt); +} + +static void spi_rx_tx(struct exynos_spi_slave *spi_slave, int todo, + void **dinp, void const **doutp) +{ + struct exynos_spi *regs = spi_slave->regs; + uchar *rxp = *dinp; + const uchar *txp = *doutp; + int rx_lvl, tx_lvl; + uint out_bytes, in_bytes; + + out_bytes = in_bytes = todo; + + /* + * If there's something to send, do a software reset and set a + * transaction size. + */ + spi_request_bytes(regs, todo); + + /* + * Bytes are transmitted/received in pairs. Wait to receive all the + * data because then transmission will be done as well. + */ + while (in_bytes) { + int temp; + + /* Keep the fifos full/empty. */ + spi_get_fifo_levels(regs, &rx_lvl, &tx_lvl); + if (tx_lvl < spi_slave->fifo_size && out_bytes) { + temp = txp ? *txp++ : 0xff; + writel(temp, ®s->tx_data); + out_bytes--; + } + if (rx_lvl > 0 && in_bytes) { + temp = readl(®s->rx_data); + if (rxp) + *rxp++ = temp; + in_bytes--; + } + } + *dinp = rxp; + *doutp = txp; +} + +/** + * Transfer and receive data + * + * @param slave Pointer to spi_slave to which controller has to + * communicate with + * @param bitlen No of bits to tranfer or receive + * @param dout Pointer to transfer buffer + * @param din Pointer to receive buffer + * @param flags Flags for transfer begin and end + * @return zero on success else a negative value + */ +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, + void *din, unsigned long flags) +{ + struct exynos_spi_slave *spi_slave = to_exynos_spi(slave); + int upto, todo; + int bytelen; + + /* spi core configured to do 8 bit transfers */ + if (bitlen % 8) { + debug("Non byte aligned SPI transfer.\n"); + return -1; + } + + /* Start the transaction, if necessary. */ + if ((flags & SPI_XFER_BEGIN)) + spi_cs_activate(slave); + + /* Exynos SPI limits each transfer to 65535 bytes */ + bytelen = bitlen / 8; + for (upto = 0; upto < bytelen; upto += todo) { + todo = min(bytelen - upto, (1 << 16) - 1); + spi_rx_tx(spi_slave, todo, &din, &dout); + } + + /* Stop the transaction, if necessary. */ + if ((flags & SPI_XFER_END)) + spi_cs_deactivate(slave); + + return 0; +} + +/** + * Validates the bus and chip select numbers + * + * @param bus ID of the bus that the slave is attached to + * @param cs ID of the chip select connected to the slave + * @return one on success else zero + */ +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return spi_get_bus(bus) && cs == 0; +} + +/** + * Activate the CS by driving it LOW + * + * @param slave Pointer to spi_slave to which controller has to + * communicate with + */ +void spi_cs_activate(struct spi_slave *slave) +{ + struct exynos_spi_slave *spi_slave = to_exynos_spi(slave); + + clrbits_le32(&spi_slave->regs->cs_reg, SPI_SLAVE_SIG_INACT); + debug("Activate CS, bus %d\n", spi_slave->slave.bus); +} + +/** + * Deactivate the CS by driving it HIGH + * + * @param slave Pointer to spi_slave to which controller has to + * communicate with + */ +void spi_cs_deactivate(struct spi_slave *slave) +{ + struct exynos_spi_slave *spi_slave = to_exynos_spi(slave); + + setbits_le32(&spi_slave->regs->cs_reg, SPI_SLAVE_SIG_INACT); + debug("Deactivate CS, bus %d\n", spi_slave->slave.bus); +} + +static inline struct exynos_spi *get_spi_base(int dev_index) +{ + if (dev_index < 3) + return (struct exynos_spi *)samsung_get_base_spi() + dev_index; + else + return (struct exynos_spi *)samsung_get_base_spi_isp() + + (dev_index - 3); +} + +/* Sadly there is no error return from this function */ +void spi_init(void) +{ + int i; + struct spi_bus *bus; + + for (i = 0; i < EXYNOS5_SPI_NUM_CONTROLLERS; i++) { + bus = &spi_bus[i]; + bus->regs = get_spi_base(i); + bus->periph_id = PERIPH_ID_SPI0 + i; + + /* Although Exynos5 supports upto 50Mhz speed, + * we are setting it to 10Mhz for safe side + */ + bus->frequency = 10000000; + bus->inited = 1; + } +} diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c index 13bebe8ac1f..859c43fee27 100644 --- a/drivers/spi/mxc_spi.c +++ b/drivers/spi/mxc_spi.c @@ -140,8 +140,8 @@ static s32 spi_cfg_mxc(struct mxc_spi_slave *mxcs, unsigned int cs, reg_ctrl = reg_read(®s->ctrl); /* Reset spi */ - reg_write(®s->ctrl, 0); - reg_write(®s->ctrl, (reg_ctrl | 0x1)); + reg_write(®s->ctrl, (reg_ctrl & ~MXC_CSPICTRL_EN)); + reg_write(®s->ctrl, (reg_ctrl | MXC_CSPICTRL_EN)); /* * The following computation is taken directly from Freescale's code. @@ -387,7 +387,7 @@ static int decode_cs(struct mxc_spi_slave *mxcs, unsigned int cs) if (cs > 3) { mxcs->gpio = cs >> 8; cs &= 3; - ret = gpio_direction_output(mxcs->gpio, 0); + ret = gpio_direction_output(mxcs->gpio, !(mxcs->ss_pol)); if (ret) { printf("mxc_spi: cannot setup gpio %d\n", mxcs->gpio); return -EINVAL; @@ -414,6 +414,8 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, return NULL; } + mxcs->ss_pol = (mode & SPI_CS_HIGH) ? 1 : 0; + ret = decode_cs(mxcs, cs); if (ret < 0) { free(mxcs); @@ -425,7 +427,6 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, mxcs->slave.bus = bus; mxcs->slave.cs = cs; mxcs->base = spi_bases[bus]; - mxcs->ss_pol = (mode & SPI_CS_HIGH) ? 1 : 0; ret = spi_cfg_mxc(mxcs, cs, max_hz, mode); if (ret) { diff --git a/drivers/usb/host/ehci-mx5.c b/drivers/usb/host/ehci-mx5.c index 9a2c295ec56..adbed5c90ca 100644 --- a/drivers/usb/host/ehci-mx5.c +++ b/drivers/usb/host/ehci-mx5.c @@ -29,34 +29,63 @@ #define MX5_USBOTHER_REGS_OFFSET 0x800 -#define MXC_OTG_OFFSET 0 -#define MXC_H1_OFFSET 0x200 -#define MXC_H2_OFFSET 0x400 +#define MXC_OTG_OFFSET 0 +#define MXC_H1_OFFSET 0x200 +#define MXC_H2_OFFSET 0x400 +#define MXC_H3_OFFSET 0x600 #define MXC_USBCTRL_OFFSET 0 #define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8 #define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc #define MXC_USB_CTRL_1_OFFSET 0x10 #define MXC_USBH2CTRL_OFFSET 0x14 +#define MXC_USBH3CTRL_OFFSET 0x18 /* USB_CTRL */ -#define MXC_OTG_UCTRL_OWIE_BIT (1 << 27) /* OTG wakeup intr enable */ -#define MXC_OTG_UCTRL_OPM_BIT (1 << 24) /* OTG power mask */ -#define MXC_H1_UCTRL_H1UIE_BIT (1 << 12) /* Host1 ULPI interrupt enable */ -#define MXC_H1_UCTRL_H1WIE_BIT (1 << 11) /* HOST1 wakeup intr enable */ -#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */ +/* OTG wakeup intr enable */ +#define MXC_OTG_UCTRL_OWIE_BIT (1 << 27) +/* OTG power mask */ +#define MXC_OTG_UCTRL_OPM_BIT (1 << 24) +/* OTG power pin polarity */ +#define MXC_OTG_UCTRL_O_PWR_POL_BIT (1 << 24) +/* Host1 ULPI interrupt enable */ +#define MXC_H1_UCTRL_H1UIE_BIT (1 << 12) +/* HOST1 wakeup intr enable */ +#define MXC_H1_UCTRL_H1WIE_BIT (1 << 11) +/* HOST1 power mask */ +#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) +/* HOST1 power pin polarity */ +#define MXC_H1_UCTRL_H1_PWR_POL_BIT (1 << 8) /* USB_PHY_CTRL_FUNC */ -#define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8) /* OTG Disable Overcurrent Event */ -#define MXC_H1_OC_DIS_BIT (1 << 5) /* UH1 Disable Overcurrent Event */ +/* OTG Polarity of Overcurrent */ +#define MXC_OTG_PHYCTRL_OC_POL_BIT (1 << 9) +/* OTG Disable Overcurrent Event */ +#define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8) +/* UH1 Polarity of Overcurrent */ +#define MXC_H1_OC_POL_BIT (1 << 6) +/* UH1 Disable Overcurrent Event */ +#define MXC_H1_OC_DIS_BIT (1 << 5) +/* OTG Power Pin Polarity */ +#define MXC_OTG_PHYCTRL_PWR_POL_BIT (1 << 3) /* USBH2CTRL */ -#define MXC_H2_UCTRL_H2UIE_BIT (1 << 8) -#define MXC_H2_UCTRL_H2WIE_BIT (1 << 7) -#define MXC_H2_UCTRL_H2PM_BIT (1 << 4) +#define MXC_H2_UCTRL_H2_OC_POL_BIT (1 << 31) +#define MXC_H2_UCTRL_H2_OC_DIS_BIT (1 << 30) +#define MXC_H2_UCTRL_H2UIE_BIT (1 << 8) +#define MXC_H2_UCTRL_H2WIE_BIT (1 << 7) +#define MXC_H2_UCTRL_H2PM_BIT (1 << 4) +#define MXC_H2_UCTRL_H2_PWR_POL_BIT (1 << 4) + +/* USBH3CTRL */ +#define MXC_H3_UCTRL_H3_OC_POL_BIT (1 << 31) +#define MXC_H3_UCTRL_H3_OC_DIS_BIT (1 << 30) +#define MXC_H3_UCTRL_H3UIE_BIT (1 << 8) +#define MXC_H3_UCTRL_H3WIE_BIT (1 << 7) +#define MXC_H3_UCTRL_H3_PWR_POL_BIT (1 << 4) /* USB_CTRL_1 */ -#define MXC_USB_CTRL_UH1_EXT_CLK_EN (1 << 25) +#define MXC_USB_CTRL_UH1_EXT_CLK_EN (1 << 25) /* USB pin configuration */ #define USB_PAD_CONFIG (PAD_CTL_PKE_ENABLE | PAD_CTL_SRE_FAST | \ @@ -143,24 +172,42 @@ int mxc_set_usbcontrol(int port, unsigned int flags) if (flags & MXC_EHCI_INTERNAL_PHY) { v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW) + v |= MXC_OTG_PHYCTRL_OC_POL_BIT; + else + v &= ~MXC_OTG_PHYCTRL_OC_POL_BIT; if (flags & MXC_EHCI_POWER_PINS_ENABLED) + /* OC/USBPWR is used */ + v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT; + else /* OC/USBPWR is not used */ v |= MXC_OTG_PHYCTRL_OC_DIS_BIT; +#ifdef CONFIG_MX51 + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MXC_OTG_PHYCTRL_PWR_POL_BIT; else - /* OC/USBPWR is used */ - v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT; + v &= ~MXC_OTG_PHYCTRL_PWR_POL_BIT; +#endif __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); +#ifdef CONFIG_MX51 if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v &= ~MXC_OTG_UCTRL_OPM_BIT; + else v |= MXC_OTG_UCTRL_OPM_BIT; +#endif +#ifdef CONFIG_MX53 + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MXC_OTG_UCTRL_O_PWR_POL_BIT; else - v &= ~MXC_OTG_UCTRL_OPM_BIT; + v &= ~MXC_OTG_UCTRL_O_PWR_POL_BIT; +#endif __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); } break; - case 1: /* Host 1 Host ULPI */ + case 1: /* Host 1 ULPI */ #ifdef CONFIG_MX51 /* The clock for the USBH1 ULPI port will come externally from the PHY. */ @@ -170,13 +217,25 @@ int mxc_set_usbcontrol(int port, unsigned int flags) #endif v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); +#ifdef CONFIG_MX51 if (flags & MXC_EHCI_POWER_PINS_ENABLED) - v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used */ + v &= ~MXC_H1_UCTRL_H1PM_BIT; /* H1 power mask unused */ else - v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used */ + v |= MXC_H1_UCTRL_H1PM_BIT; /* H1 power mask used */ +#endif +#ifdef CONFIG_MX53 + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MXC_H1_UCTRL_H1_PWR_POL_BIT; + else + v &= ~MXC_H1_UCTRL_H1_PWR_POL_BIT; +#endif __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW) + v |= MXC_H1_OC_POL_BIT; + else + v &= ~MXC_H1_OC_POL_BIT; if (flags & MXC_EHCI_POWER_PINS_ENABLED) v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */ else @@ -186,24 +245,59 @@ int mxc_set_usbcontrol(int port, unsigned int flags) break; case 2: /* Host 2 ULPI */ v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET); +#ifdef CONFIG_MX51 if (flags & MXC_EHCI_POWER_PINS_ENABLED) - v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used */ + v &= ~MXC_H2_UCTRL_H2PM_BIT; /* H2 power mask unused */ else - v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used */ - + v |= MXC_H2_UCTRL_H2PM_BIT; /* H2 power mask used */ +#endif +#ifdef CONFIG_MX53 + if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW) + v |= MXC_H2_UCTRL_H2_OC_POL_BIT; + else + v &= ~MXC_H2_UCTRL_H2_OC_POL_BIT; + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v &= ~MXC_H2_UCTRL_H2_OC_DIS_BIT; /* OC is used */ + else + v |= MXC_H2_UCTRL_H2_OC_DIS_BIT; /* OC is not used */ + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MXC_H2_UCTRL_H2_PWR_POL_BIT; + else + v &= ~MXC_H2_UCTRL_H2_PWR_POL_BIT; +#endif __raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET); break; +#ifdef CONFIG_MX53 + case 3: /* Host 3 ULPI */ + v = __raw_readl(usbother_base + MXC_USBH3CTRL_OFFSET); + if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW) + v |= MXC_H3_UCTRL_H3_OC_POL_BIT; + else + v &= ~MXC_H3_UCTRL_H3_OC_POL_BIT; + if (flags & MXC_EHCI_POWER_PINS_ENABLED) + v &= ~MXC_H3_UCTRL_H3_OC_DIS_BIT; /* OC is used */ + else + v |= MXC_H3_UCTRL_H3_OC_DIS_BIT; /* OC is not used */ + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MXC_H3_UCTRL_H3_PWR_POL_BIT; + else + v &= ~MXC_H3_UCTRL_H3_PWR_POL_BIT; + __raw_writel(v, usbother_base + MXC_USBH3CTRL_OFFSET); + break; +#endif } return ret; } -void __board_ehci_hcd_postinit(struct usb_ehci *ehci, int port) +int __weak board_ehci_hcd_init(int port) { + return 0; } -void board_ehci_hcd_postinit(struct usb_ehci *ehci, int port) - __attribute((weak, alias("__board_ehci_hcd_postinit"))); +void __weak board_ehci_hcd_postinit(struct usb_ehci *ehci, int port) +{ +} int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) { diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index 9ce25da5980..1b20e4185cf 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -159,6 +159,11 @@ static void usbh1_oc_config(void) __raw_writel(val, usbother_base + USB_H1_CTRL_OFFSET); } +int __weak board_ehci_hcd_init(int port) +{ + return 0; +} + int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) { struct usb_ehci *ehci; diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index a38bc9c1bb9..8633cab940c 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -28,14 +28,22 @@ #define USBCTRL_OTGBASE_OFFSET 0x600 -#ifdef CONFIG_MX25 -#define MX25_USB_CTRL_IP_PUE_DOWN_BIT (1<<6) -#define MX25_USB_CTRL_HSTD_BIT (1<<5) -#define MX25_USB_CTRL_USBTE_BIT (1<<4) -#define MX25_USB_CTRL_OCPOL_OTG_BIT (1<<3) -#endif +#define MX25_OTG_SIC_SHIFT 29 +#define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT) +#define MX25_OTG_PM_BIT (1 << 24) +#define MX25_OTG_PP_BIT (1 << 11) +#define MX25_OTG_OCPOL_BIT (1 << 3) + +#define MX25_H1_SIC_SHIFT 21 +#define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT) +#define MX25_H1_PP_BIT (1 << 18) +#define MX25_H1_PM_BIT (1 << 16) +#define MX25_H1_IPPUE_UP_BIT (1 << 7) +#define MX25_H1_IPPUE_DOWN_BIT (1 << 6) +#define MX25_H1_TLL_BIT (1 << 5) +#define MX25_H1_USBTE_BIT (1 << 4) +#define MX25_H1_OCPOL_BIT (1 << 2) -#ifdef CONFIG_MX31 #define MX31_OTG_SIC_SHIFT 29 #define MX31_OTG_SIC_MASK (0x3 << MX31_OTG_SIC_SHIFT) #define MX31_OTG_PM_BIT (1 << 24) @@ -49,59 +57,166 @@ #define MX31_H1_SIC_MASK (0x3 << MX31_H1_SIC_SHIFT) #define MX31_H1_PM_BIT (1 << 8) #define MX31_H1_DT_BIT (1 << 4) -#endif + +#define MX35_OTG_SIC_SHIFT 29 +#define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT) +#define MX35_OTG_PM_BIT (1 << 24) +#define MX35_OTG_PP_BIT (1 << 11) +#define MX35_OTG_OCPOL_BIT (1 << 3) + +#define MX35_H1_SIC_SHIFT 21 +#define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT) +#define MX35_H1_PP_BIT (1 << 18) +#define MX35_H1_PM_BIT (1 << 16) +#define MX35_H1_IPPUE_UP_BIT (1 << 7) +#define MX35_H1_IPPUE_DOWN_BIT (1 << 6) +#define MX35_H1_TLL_BIT (1 << 5) +#define MX35_H1_USBTE_BIT (1 << 4) +#define MX35_H1_OCPOL_BIT (1 << 2) static int mxc_set_usbcontrol(int port, unsigned int flags) { unsigned int v; -#ifdef CONFIG_MX25 - v = MX25_USB_CTRL_IP_PUE_DOWN_BIT | MX25_USB_CTRL_HSTD_BIT | - MX25_USB_CTRL_USBTE_BIT | MX25_USB_CTRL_OCPOL_OTG_BIT; -#endif + v = readl(IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET); +#if defined(CONFIG_MX25) + switch (port) { + case 0: /* OTG port */ + v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT | MX25_OTG_PP_BIT | + MX25_OTG_OCPOL_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT; -#ifdef CONFIG_MX31 - v = readl(IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET); - - switch (port) { - case 0: /* OTG port */ - v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) - << MX31_OTG_SIC_SHIFT; - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX31_OTG_PM_BIT; - - break; - case 1: /* H1 port */ - v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | - MX31_H1_DT_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) - << MX31_H1_SIC_SHIFT; - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX31_H1_PM_BIT; - - if (!(flags & MXC_EHCI_TTL_ENABLED)) - v |= MX31_H1_DT_BIT; - - break; - case 2: /* H2 port */ - v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | - MX31_H2_DT_BIT); - v |= (flags & MXC_EHCI_INTERFACE_MASK) - << MX31_H2_SIC_SHIFT; - if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) - v |= MX31_H2_PM_BIT; - - if (!(flags & MXC_EHCI_TTL_ENABLED)) - v |= MX31_H2_DT_BIT; - - break; - default: - return -EINVAL; - } -#endif + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX25_OTG_PM_BIT; + + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MX25_OTG_PP_BIT; + + if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) + v |= MX25_OTG_OCPOL_BIT; + + break; + case 1: /* H1 port */ + v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_PP_BIT | + MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | + MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT | + MX25_H1_IPPUE_UP_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX25_H1_PM_BIT; + + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MX25_H1_PP_BIT; + + if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) + v |= MX25_H1_OCPOL_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX25_H1_TLL_BIT; + + if (flags & MXC_EHCI_INTERNAL_PHY) + v |= MX25_H1_USBTE_BIT; + + if (flags & MXC_EHCI_IPPUE_DOWN) + v |= MX25_H1_IPPUE_DOWN_BIT; + + if (flags & MXC_EHCI_IPPUE_UP) + v |= MX25_H1_IPPUE_UP_BIT; + + break; + default: + return -EINVAL; + } +#elif defined(CONFIG_MX31) + switch (port) { + case 0: /* OTG port */ + v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_OTG_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX31_OTG_PM_BIT; + break; + case 1: /* H1 port */ + v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H1_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX31_H1_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX31_H1_DT_BIT; + + break; + case 2: /* H2 port */ + v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX31_H2_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX31_H2_PM_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX31_H2_DT_BIT; + + break; + default: + return -EINVAL; + } +#elif defined(CONFIG_MX35) + switch (port) { + case 0: /* OTG port */ + v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT | MX35_OTG_PP_BIT | + MX35_OTG_OCPOL_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX35_OTG_PM_BIT; + + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MX35_OTG_PP_BIT; + + if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) + v |= MX35_OTG_OCPOL_BIT; + + break; + case 1: /* H1 port */ + v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_PP_BIT | + MX35_H1_OCPOL_BIT | MX35_H1_TLL_BIT | + MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | + MX35_H1_IPPUE_UP_BIT); + v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT; + + if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) + v |= MX35_H1_PM_BIT; + + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MX35_H1_PP_BIT; + + if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) + v |= MX35_H1_OCPOL_BIT; + + if (!(flags & MXC_EHCI_TTL_ENABLED)) + v |= MX35_H1_TLL_BIT; + + if (flags & MXC_EHCI_INTERNAL_PHY) + v |= MX35_H1_USBTE_BIT; + + if (flags & MXC_EHCI_IPPUE_DOWN) + v |= MX35_H1_IPPUE_DOWN_BIT; + + if (flags & MXC_EHCI_IPPUE_UP) + v |= MX35_H1_IPPUE_UP_BIT; + + break; + default: + return -EINVAL; + } +#else +#error MXC EHCI USB driver not supported on this platform +#endif writel(v, IMX_USB_BASE + USBCTRL_OTGBASE_OFFSET); + return 0; } @@ -119,13 +234,17 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor) udelay(80); ehci = (struct usb_ehci *)(IMX_USB_BASE + - (0x200 * CONFIG_MXC_USB_PORT)); + IMX_USB_PORT_OFFSET * CONFIG_MXC_USB_PORT); *hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength); *hcor = (struct ehci_hcor *)((uint32_t) *hccr + HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); setbits_le32(&ehci->usbmode, CM_HOST); __raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc); mxc_set_usbcontrol(CONFIG_MXC_USB_PORT, CONFIG_MXC_USB_FLAGS); +#ifdef CONFIG_MX35 + /* Workaround for ENGcm11601 */ + __raw_writel(0, &ehci->sbuscfg); +#endif udelay(10000); diff --git a/drivers/video/Makefile b/drivers/video/Makefile index cc3022a2c73..170a358b528 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -37,6 +37,7 @@ COBJS-$(CONFIG_EXYNOS_PWM_BL) += exynos_pwm_bl.o COBJS-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o COBJS-$(CONFIG_S6E8AX0) += s6e8ax0.o COBJS-$(CONFIG_S6E63D6) += s6e63d6.o +COBJS-$(CONFIG_LD9040) += ld9040.o COBJS-$(CONFIG_SED156X) += sed156x.o COBJS-$(CONFIG_VIDEO_AMBA) += amba.o COBJS-$(CONFIG_VIDEO_COREBOOT) += coreboot_fb.o @@ -50,6 +51,7 @@ COBJS-$(CONFIG_VIDEO_OMAP3) += omap3_dss.o COBJS-$(CONFIG_VIDEO_SED13806) += sed13806.o COBJS-$(CONFIG_VIDEO_SM501) += sm501.o COBJS-$(CONFIG_VIDEO_SMI_LYNXEM) += smiLynxEM.o videomodes.o +COBJS-$(CONFIG_VIDEO_TEGRA) += tegra.o COBJS-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o COBJS := $(sort $(COBJS-y)) diff --git a/drivers/video/exynos_fb.c b/drivers/video/exynos_fb.c index e31a0fd500a..d9a3f9ab189 100644 --- a/drivers/video/exynos_fb.c +++ b/drivers/video/exynos_fb.c @@ -70,8 +70,19 @@ static void draw_logo(void) int x, y; ulong addr; - x = ((panel_width - panel_info.logo_width) >> 1); - y = ((panel_height - panel_info.logo_height) >> 1) - 4; + if (panel_width >= panel_info.logo_width) { + x = ((panel_width - panel_info.logo_width) >> 1); + } else { + x = 0; + printf("Warning: image width is bigger than display width\n"); + } + + if (panel_height >= panel_info.logo_height) { + y = ((panel_height - panel_info.logo_height) >> 1) - 4; + } else { + y = 0; + printf("Warning: image height is bigger than display height\n"); + } addr = panel_info.logo_addr; bmp_display(addr, x, y); diff --git a/drivers/video/ipu_regs.h b/drivers/video/ipu_regs.h index a43aa03735b..982e2525097 100644 --- a/drivers/video/ipu_regs.h +++ b/drivers/video/ipu_regs.h @@ -55,7 +55,7 @@ #define IPU_TPM_REG_BASE 0x01060000 #define IPU_DC_TMPL_REG_BASE 0x01080000 #define IPU_ISP_TBPR_REG_BASE 0x010C0000 -#elif defined(CONFIG_MX6Q) +#elif defined(CONFIG_MX6) #define IPU_CPMEM_REG_BASE 0x00100000 #define IPU_LUT_REG_BASE 0x00120000 #define IPU_SRM_REG_BASE 0x00140000 diff --git a/drivers/video/ld9040.c b/drivers/video/ld9040.c new file mode 100644 index 00000000000..c01ae12bbca --- /dev/null +++ b/drivers/video/ld9040.c @@ -0,0 +1,144 @@ +/* + * ld9040 AMOLED LCD panel driver. + * + * Copyright (C) 2012 Samsung Electronics + * Donghwa Lee <dh09.lee@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <spi.h> + +static const unsigned char SEQ_SWRESET[] = { + 0x01, +}; + +static const unsigned char SEQ_USER_SETTING[] = { + 0xF0, 0x5A, 0x5A +}; + +static const unsigned char SEQ_ELVSS_ON[] = { + 0xB1, 0x0D, 0x00, 0x16, +}; + +static const unsigned char SEQ_TEMP_SWIRE[] = { + 0xB2, 0x06, 0x06, 0x06, 0x06, +}; + +static const unsigned char SEQ_GTCON[] = { + 0xF7, 0x09, 0x00, 0x00, +}; + +static const unsigned char SEQ_PANEL_CONDITION[] = { + 0xF8, 0x05, 0x65, 0x96, 0x71, 0x7D, 0x19, 0x3B, + 0x0D, 0x19, 0x7E, 0x0D, 0xE2, 0x00, 0x00, 0x7E, + 0x7D, 0x07, 0x07, 0x20, 0x20, 0x20, 0x02, 0x02, +}; + +static const unsigned char SEQ_GAMMA_SET1[] = { + 0xF9, 0x00, 0xA7, 0xB4, 0xAE, 0xBF, 0x00, 0x91, + 0x00, 0xB2, 0xB4, 0xAA, 0xBB, 0x00, 0xAC, 0x00, + 0xB3, 0xB1, 0xAA, 0xBC, 0x00, 0xB3, +}; + +static const unsigned char SEQ_GAMMA_CTRL[] = { + 0xFB, 0x02, 0x5A, +}; + +static const unsigned char SEQ_APON[] = { + 0xF3, 0x00, 0x00, 0x00, 0x0A, 0x02, +}; + +static const unsigned char SEQ_DISPCTL[] = { + 0xF2, 0x02, 0x08, 0x08, 0x10, 0x10, +}; + +static const unsigned char SEQ_MANPWR[] = { + 0xB0, 0x04, +}; + +static const unsigned char SEQ_PWR_CTRL[] = { + 0xF4, 0x0A, 0x87, 0x25, 0x6A, 0x44, 0x02, 0x88, +}; + +static const unsigned char SEQ_SLPOUT[] = { + 0x11, +}; + +static const unsigned char SEQ_SLPIN[] = { + 0x10, +}; + +static const unsigned char SEQ_DISPON[] = { + 0x29, +}; + +static const unsigned char SEQ_DISPOFF[] = { + 0x28, +}; + +static void ld9040_spi_write(const unsigned char *wbuf, unsigned int size_cmd) +{ + int i = 0; + + /* + * Data are transmitted in 9-bit words: + * the first bit is command/parameter, the other are the value. + * The value's LSB is shifted to MSB position, to be sent as 9th bit + */ + + unsigned int data_out = 0, data_in = 0; + for (i = 0; i < size_cmd; i++) { + data_out = wbuf[i] >> 1; + if (i != 0) + data_out += 0x0080; + if (wbuf[i] & 0x01) + data_out += 0x8000; + spi_xfer(NULL, 9, &data_out, &data_in, SPI_XFER_BEGIN); + } +} + +void ld9040_cfg_ldo(void) +{ + udelay(10); + + ld9040_spi_write(SEQ_USER_SETTING, + ARRAY_SIZE(SEQ_USER_SETTING)); + ld9040_spi_write(SEQ_PANEL_CONDITION, + ARRAY_SIZE(SEQ_PANEL_CONDITION)); + ld9040_spi_write(SEQ_DISPCTL, ARRAY_SIZE(SEQ_DISPCTL)); + ld9040_spi_write(SEQ_MANPWR, ARRAY_SIZE(SEQ_MANPWR)); + ld9040_spi_write(SEQ_PWR_CTRL, ARRAY_SIZE(SEQ_PWR_CTRL)); + ld9040_spi_write(SEQ_ELVSS_ON, ARRAY_SIZE(SEQ_ELVSS_ON)); + ld9040_spi_write(SEQ_GTCON, ARRAY_SIZE(SEQ_GTCON)); + ld9040_spi_write(SEQ_GAMMA_SET1, ARRAY_SIZE(SEQ_GAMMA_SET1)); + ld9040_spi_write(SEQ_GAMMA_CTRL, ARRAY_SIZE(SEQ_GAMMA_CTRL)); + ld9040_spi_write(SEQ_SLPOUT, ARRAY_SIZE(SEQ_SLPOUT)); + + udelay(120); +} + +void ld9040_enable_ldo(unsigned int onoff) +{ + if (onoff) + ld9040_spi_write(SEQ_DISPON, ARRAY_SIZE(SEQ_DISPON)); + else + ld9040_spi_write(SEQ_DISPOFF, ARRAY_SIZE(SEQ_DISPOFF)); +} diff --git a/drivers/video/tegra.c b/drivers/video/tegra.c new file mode 100644 index 00000000000..750a2834383 --- /dev/null +++ b/drivers/video/tegra.c @@ -0,0 +1,379 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <fdtdec.h> +#include <lcd.h> + +#include <asm/system.h> +#include <asm/gpio.h> + +#include <asm/arch/clock.h> +#include <asm/arch/funcmux.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/pwm.h> +#include <asm/arch/display.h> +#include <asm/arch-tegra/timer.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* These are the stages we go throuh in enabling the LCD */ +enum stage_t { + STAGE_START, + STAGE_PANEL_VDD, + STAGE_LVDS, + STAGE_BACKLIGHT_VDD, + STAGE_PWM, + STAGE_BACKLIGHT_EN, + STAGE_DONE, +}; + +static enum stage_t stage; /* Current stage we are at */ +static unsigned long timer_next; /* Time we can move onto next stage */ + +/* Our LCD config, set up in handle_stage() */ +static struct fdt_panel_config config; +struct fdt_disp_config *disp_config; /* Display controller config */ + +enum { + /* Maximum LCD size we support */ + LCD_MAX_WIDTH = 1366, + LCD_MAX_HEIGHT = 768, + LCD_MAX_LOG2_BPP = 4, /* 2^4 = 16 bpp */ +}; + +int lcd_line_length; +int lcd_color_fg; +int lcd_color_bg; + +void *lcd_base; /* Start of framebuffer memory */ +void *lcd_console_address; /* Start of console buffer */ + +short console_col; +short console_row; + +vidinfo_t panel_info = { + /* Insert a value here so that we don't end up in the BSS */ + .vl_col = -1, +}; + +char lcd_cursor_enabled; + +ushort lcd_cursor_width; +ushort lcd_cursor_height; + +#ifndef CONFIG_OF_CONTROL +#error "You must enable CONFIG_OF_CONTROL to get Tegra LCD support" +#endif + +void lcd_cursor_size(ushort width, ushort height) +{ + lcd_cursor_width = width; + lcd_cursor_height = height; +} + +void lcd_toggle_cursor(void) +{ + ushort x, y; + uchar *dest; + ushort row; + + x = console_col * lcd_cursor_width; + y = console_row * lcd_cursor_height; + dest = (uchar *)(lcd_base + y * lcd_line_length + x * (1 << LCD_BPP) / + 8); + + for (row = 0; row < lcd_cursor_height; ++row, dest += lcd_line_length) { + ushort *d = (ushort *)dest; + ushort color; + int i; + + for (i = 0; i < lcd_cursor_width; ++i) { + color = *d; + color ^= lcd_color_fg; + *d = color; + ++d; + } + } +} + +void lcd_cursor_on(void) +{ + lcd_cursor_enabled = 1; + lcd_toggle_cursor(); +} +void lcd_cursor_off(void) +{ + lcd_cursor_enabled = 0; + lcd_toggle_cursor(); +} + +char lcd_is_cursor_enabled(void) +{ + return lcd_cursor_enabled; +} + +static void update_panel_size(struct fdt_disp_config *config) +{ + panel_info.vl_col = config->width; + panel_info.vl_row = config->height; + panel_info.vl_bpix = config->log2_bpp; +} + +/* + * Main init function called by lcd driver. + * Inits and then prints test pattern if required. + */ + +void lcd_ctrl_init(void *lcdbase) +{ + int line_length, size; + int type = DCACHE_OFF; + + assert(disp_config); + + lcd_base = (void *)disp_config->frame_buffer; + + /* Make sure that we can acommodate the selected LCD */ + assert(disp_config->width <= LCD_MAX_WIDTH); + assert(disp_config->height <= LCD_MAX_HEIGHT); + assert(disp_config->log2_bpp <= LCD_MAX_LOG2_BPP); + if (disp_config->width <= LCD_MAX_WIDTH + && disp_config->height <= LCD_MAX_HEIGHT + && disp_config->log2_bpp <= LCD_MAX_LOG2_BPP) + update_panel_size(disp_config); + size = lcd_get_size(&line_length); + + /* Set up the LCD caching as requested */ + if (config.cache_type & FDT_LCD_CACHE_WRITE_THROUGH) + type = DCACHE_WRITETHROUGH; + else if (config.cache_type & FDT_LCD_CACHE_WRITE_BACK) + type = DCACHE_WRITEBACK; + mmu_set_region_dcache_behaviour(disp_config->frame_buffer, size, type); + + /* Enable flushing after LCD writes if requested */ + lcd_set_flush_dcache(config.cache_type & FDT_LCD_CACHE_FLUSH); + + debug("LCD frame buffer at %p\n", lcd_base); +} + +ulong calc_fbsize(void) +{ + return (panel_info.vl_col * panel_info.vl_row * + NBITS(panel_info.vl_bpix)) / 8; +} + +void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue) +{ +} + +void tegra_lcd_early_init(const void *blob) +{ + /* + * Go with the maximum size for now. We will fix this up after + * relocation. These values are only used for memory alocation. + */ + panel_info.vl_col = LCD_MAX_WIDTH; + panel_info.vl_row = LCD_MAX_HEIGHT; + panel_info.vl_bpix = LCD_MAX_LOG2_BPP; +} + +/** + * Decode the panel information from the fdt. + * + * @param blob fdt blob + * @param config structure to store fdt config into + * @return 0 if ok, -ve on error + */ +static int fdt_decode_lcd(const void *blob, struct fdt_panel_config *config) +{ + int display_node; + + disp_config = tegra_display_get_config(); + if (!disp_config) { + debug("%s: Display controller is not configured\n", __func__); + return -1; + } + display_node = disp_config->panel_node; + if (display_node < 0) { + debug("%s: No panel configuration available\n", __func__); + return -1; + } + + config->pwm_channel = pwm_request(blob, display_node, "nvidia,pwm"); + if (config->pwm_channel < 0) { + debug("%s: Unable to request PWM channel\n", __func__); + return -1; + } + + config->cache_type = fdtdec_get_int(blob, display_node, + "nvidia,cache-type", + FDT_LCD_CACHE_WRITE_BACK_FLUSH); + + /* These GPIOs are all optional */ + fdtdec_decode_gpio(blob, display_node, "nvidia,backlight-enable-gpios", + &config->backlight_en); + fdtdec_decode_gpio(blob, display_node, "nvidia,lvds-shutdown-gpios", + &config->lvds_shutdown); + fdtdec_decode_gpio(blob, display_node, "nvidia,backlight-vdd-gpios", + &config->backlight_vdd); + fdtdec_decode_gpio(blob, display_node, "nvidia,panel-vdd-gpios", + &config->panel_vdd); + + return fdtdec_get_int_array(blob, display_node, "nvidia,panel-timings", + config->panel_timings, FDT_LCD_TIMINGS); +} + +/** + * Handle the next stage of device init + */ +static int handle_stage(const void *blob) +{ + debug("%s: stage %d\n", __func__, stage); + + /* do the things for this stage */ + switch (stage) { + case STAGE_START: + /* Initialize the Tegra display controller */ + if (tegra_display_probe(gd->fdt_blob, (void *)gd->fb_base)) { + printf("%s: Failed to probe display driver\n", + __func__); + return -1; + } + + /* get panel details */ + if (fdt_decode_lcd(blob, &config)) { + printf("No valid LCD information in device tree\n"); + return -1; + } + + /* + * It is possible that the FDT has requested that the LCD be + * disabled. We currently don't support this. It would require + * changes to U-Boot LCD subsystem to have LCD support + * compiled in but not used. An easier option might be to + * still have a frame buffer, but leave the backlight off and + * remove all mention of lcd in the stdout environment + * variable. + */ + + funcmux_select(PERIPH_ID_DISP1, FUNCMUX_DEFAULT); + + fdtdec_setup_gpio(&config.panel_vdd); + fdtdec_setup_gpio(&config.lvds_shutdown); + fdtdec_setup_gpio(&config.backlight_vdd); + fdtdec_setup_gpio(&config.backlight_en); + + /* + * TODO: If fdt includes output flag we can omit this code + * since fdtdec_setup_gpio will do it for us. + */ + if (fdt_gpio_isvalid(&config.panel_vdd)) + gpio_direction_output(config.panel_vdd.gpio, 0); + if (fdt_gpio_isvalid(&config.lvds_shutdown)) + gpio_direction_output(config.lvds_shutdown.gpio, 0); + if (fdt_gpio_isvalid(&config.backlight_vdd)) + gpio_direction_output(config.backlight_vdd.gpio, 0); + if (fdt_gpio_isvalid(&config.backlight_en)) + gpio_direction_output(config.backlight_en.gpio, 0); + break; + case STAGE_PANEL_VDD: + if (fdt_gpio_isvalid(&config.panel_vdd)) + gpio_direction_output(config.panel_vdd.gpio, 1); + break; + case STAGE_LVDS: + if (fdt_gpio_isvalid(&config.lvds_shutdown)) + gpio_set_value(config.lvds_shutdown.gpio, 1); + break; + case STAGE_BACKLIGHT_VDD: + if (fdt_gpio_isvalid(&config.backlight_vdd)) + gpio_set_value(config.backlight_vdd.gpio, 1); + break; + case STAGE_PWM: + /* Enable PWM at 15/16 high, 32768 Hz with divider 1 */ + pinmux_set_func(PINGRP_GPU, PMUX_FUNC_PWM); + pinmux_tristate_disable(PINGRP_GPU); + + pwm_enable(config.pwm_channel, 32768, 0xdf, 1); + break; + case STAGE_BACKLIGHT_EN: + if (fdt_gpio_isvalid(&config.backlight_en)) + gpio_set_value(config.backlight_en.gpio, 1); + break; + case STAGE_DONE: + break; + } + + /* set up timer for next stage */ + timer_next = timer_get_us(); + if (stage < FDT_LCD_TIMINGS) + timer_next += config.panel_timings[stage] * 1000; + + /* move to next stage */ + stage++; + return 0; +} + +int tegra_lcd_check_next_stage(const void *blob, int wait) +{ + if (stage == STAGE_DONE) + return 0; + + do { + /* wait if we need to */ + debug("%s: stage %d\n", __func__, stage); + if (stage != STAGE_START) { + int delay = timer_next - timer_get_us(); + + if (delay > 0) { + if (wait) + udelay(delay); + else + return 0; + } + } + + if (handle_stage(blob)) + return -1; + } while (wait && stage != STAGE_DONE); + if (stage == STAGE_DONE) + debug("%s: LCD init complete\n", __func__); + + return 0; +} + +void lcd_enable(void) +{ + /* + * Backlight and power init will be done separately in + * tegra_lcd_check_next_stage(), which should be called in + * board_late_init(). + * + * U-Boot code supports only colour depth, selected at compile time. + * The device tree setting should match this. Otherwise the display + * will not look right, and U-Boot may crash. + */ + if (disp_config->log2_bpp != LCD_BPP) { + printf("%s: Error: LCD depth configured in FDT (%d = %dbpp)" + " must match setting of LCD_BPP (%d)\n", __func__, + disp_config->log2_bpp, disp_config->bpp, LCD_BPP); + } +} diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 923acb9f3af..bc091239104 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -28,6 +28,7 @@ LIB := $(obj)libwatchdog.o COBJS-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o COBJS-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o COBJS-$(CONFIG_TNETV107X_WATCHDOG) += tnetv107x_wdt.o +COBJS-$(CONFIG_S5P) += s5p_wdt.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/arch/arm/cpu/armv7/s5p-common/wdt.c b/drivers/watchdog/s5p_wdt.c index 94acc1e4baa..94acc1e4baa 100644 --- a/arch/arm/cpu/armv7/s5p-common/wdt.c +++ b/drivers/watchdog/s5p_wdt.c diff --git a/include/configs/harmony.h b/include/configs/harmony.h index 040bfe48eb0..8d1fd47afe7 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -58,14 +58,16 @@ #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION +#define CONFIG_FS_EXT4 +#define CONFIG_FS_FAT #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC /* NAND support */ #define CONFIG_CMD_NAND #define CONFIG_TEGRA_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE NV_PA_NAND_BASE /* Environment in NAND (which is 512M), aligned to start of last sector */ #define CONFIG_ENV_IS_IN_NAND diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index bd000a7f09d..b5338a00090 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -19,8 +19,10 @@ /* High Level Configuration Options */ +#define CONFIG_MX25 #define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_TEXT_BASE 0x81200000 +#define CONFIG_MXC_GPIO #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -41,6 +43,7 @@ #define PHYS_SDRAM_1_SIZE (64 * 1024 * 1024) #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_RAM_ADDR IMX_RAM_BASE @@ -64,9 +67,10 @@ /* No NOR flash present */ #define CONFIG_ENV_OFFSET (6 * 64 * 1024) #define CONFIG_ENV_SIZE (8 * 1024) -#define CONFIG_ENV_IS_NOWHERE #define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 /* U-Boot general configuration */ #define CONFIG_SYS_PROMPT "MX25PDK U-Boot > " @@ -83,7 +87,11 @@ /* U-Boot commands */ #include <config_cmd_default.h> +#define CONFIG_CMD_BOOTZ #define CONFIG_CMD_CACHE +#define CONFIG_CMD_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT /* Ethernet */ #define CONFIG_FEC_MXC @@ -92,7 +100,37 @@ #define CONFIG_CMD_NET #define CONFIG_ENV_OVERWRITE -#define CONFIG_BOOTDELAY 3 +/* ESDHC driver */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_NUM 1 + +/* PMIC Configs */ +#define CONFIG_PMIC +#define CONFIG_PMIC_I2C +#define CONFIG_PMIC_FSL +#define CONFIG_PMIC_FSL_MC34704 +#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x54 + +#define CONFIG_DOS_PARTITION + +/* I2C Configs */ +#define CONFIG_CMD_I2C +#define CONFIG_HARD_I2C +#define CONFIG_I2C_MXC +#define CONFIG_SYS_I2C_BASE IMX_I2C_BASE +#define CONFIG_SYS_I2C_SPEED 100000 + +/* Ethernet Configs */ + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET + +#define CONFIG_BOOTDELAY 1 #define CONFIG_LOADADDR 0x81000000 /* loadaddr env var */ #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index 2916c710e41..8b89b25f74d 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -238,7 +238,7 @@ */ #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTDELAY 1 #define CONFIG_BOOTFILE "uImage" #define CONFIG_LOADADDR 0x42000000 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 3b86c9ebf35..138a9413730 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -106,7 +106,7 @@ #define CONFIG_BOARD_LATE_INIT -#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTDELAY 1 #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs_base=setenv bootargs console=ttymxc0,115200\0" \ diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index 342d53fee0b..88b2bd6ed44 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -68,6 +68,7 @@ #define CONFIG_POWER #define CONFIG_POWER_I2C #define CONFIG_POWER_FSL +#define CONFIG_PMIC_FSL_MC13892 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x08 #define CONFIG_RTC_MC13XXX @@ -94,6 +95,7 @@ #include <config_cmd_default.h> +#define CONFIG_CMD_BOOTZ #define CONFIG_CMD_PING #define CONFIG_CMD_DHCP #define CONFIG_BOOTP_SUBNETMASK @@ -110,13 +112,15 @@ #define CONFIG_NET_RETRY_COUNT 100 #define CONFIG_CMD_DATE +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE #define CONFIG_CMD_MMC #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT -#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTDELAY 1 #define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ @@ -242,6 +246,18 @@ #define CONFIG_MXC_NAND_HWECC #define CONFIG_SYS_NAND_LARGEPAGE +/* EHCI driver */ +#define CONFIG_USB_EHCI +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 1 +#define CONFIG_EHCI_IS_TDI +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_USB_EHCI_MXC +#define CONFIG_MXC_USB_PORT 0 +#define CONFIG_MXC_USB_FLAGS (MXC_EHCI_INTERFACE_DIFF_UNI | \ + MXC_EHCI_POWER_PINS_ENABLED | \ + MXC_EHCI_OC_PIN_ACTIVE_LOW) +#define CONFIG_MXC_USB_PORTSC (MXC_EHCI_UTMI_16BIT | MXC_EHCI_MODE_UTMI) + /* mmc driver */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC diff --git a/include/configs/mx51_efikamx.h b/include/configs/mx51_efikamx.h index 3c1c056fe31..a74a0a71f19 100644 --- a/include/configs/mx51_efikamx.h +++ b/include/configs/mx51_efikamx.h @@ -261,5 +261,6 @@ #define CONFIG_SYS_DDR_CLKSEL 0 #define CONFIG_SYS_CLKTL_CBCDR 0x59E35145 +#define CONFIG_SYS_MAIN_PWR_ON #endif diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index f00cec28096..fa0db3824b5 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -144,12 +144,12 @@ ***********************************************************/ #include <config_cmd_default.h> - +#define CONFIG_CMD_BOOTZ #undef CONFIG_CMD_IMLS #define CONFIG_CMD_DATE -#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTDELAY 1 #define CONFIG_ETHPRIME "FEC0" @@ -235,6 +235,7 @@ #define CONFIG_SYS_DDR_CLKSEL 0 #define CONFIG_SYS_CLKTL_CBCDR 0x59E35100 +#define CONFIG_SYS_MAIN_PWR_ON /*----------------------------------------------------------------------- * FLASH and environment organization diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index 1916b85e283..a0af3eeb26f 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -59,6 +59,7 @@ #define CONFIG_POWER_I2C #define CONFIG_POWER_FSL #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 8 +#define CONFIG_PMIC_FSL_MC13892 #define CONFIG_RTC_MC13XXX /* MMC Configs */ diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index a1101762e38..e30502b4e21 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -93,6 +93,7 @@ #define CONFIG_POWER_I2C #define CONFIG_DIALOG_POWER #define CONFIG_POWER_FSL +#define CONFIG_PMIC_FSL_MC13892 #define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8 @@ -103,10 +104,11 @@ /* Command definition */ #include <config_cmd_default.h> +#define CONFIG_CMD_BOOTZ #undef CONFIG_CMD_IMLS -#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTDELAY 1 #define CONFIG_ETHPRIME "FEC0" diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h index 28a3deb53e1..138e4601807 100644 --- a/include/configs/mx6qarm2.h +++ b/include/configs/mx6qarm2.h @@ -22,6 +22,7 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_MX6 #define CONFIG_MX6Q #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h index a5c93d0af56..0f226f790ec 100644 --- a/include/configs/mx6qsabre_common.h +++ b/include/configs/mx6qsabre_common.h @@ -17,6 +17,7 @@ #ifndef __MX6QSABRE_COMMON_CONFIG_H #define __MX6QSABRE_COMMON_CONFIG_H +#define CONFIG_MX6 #define CONFIG_MX6Q #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -72,9 +73,10 @@ /* Command definition */ #include <config_cmd_default.h> +#define CONFIG_CMD_BOOTZ #undef CONFIG_CMD_IMLS -#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTDELAY 1 #define CONFIG_LOADADDR 0x10800000 #define CONFIG_SYS_TEXT_BASE 0x17800000 diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h index a28d5a50c12..4ce4d4c0865 100644 --- a/include/configs/mx6qsabrelite.h +++ b/include/configs/mx6qsabrelite.h @@ -22,6 +22,7 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_MX6 #define CONFIG_MX6Q #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO @@ -143,7 +144,7 @@ #undef CONFIG_CMD_IMLS -#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTDELAY 1 #define CONFIG_PREBOOT "" diff --git a/include/configs/palmld.h b/include/configs/palmld.h index c5dd494059e..3f9802ca0f5 100644 --- a/include/configs/palmld.h +++ b/include/configs/palmld.h @@ -28,6 +28,9 @@ #define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ #define CONFIG_PALMLD 1 /* Palm LifeDrive board */ +/* we will never enable dcache, because we have to setup MMU first */ +#define CONFIG_SYS_DCACHE_OFF + /* * Environment settings */ diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h index 9c948c54735..64771e7e8d8 100644 --- a/include/configs/palmtc.h +++ b/include/configs/palmtc.h @@ -30,6 +30,9 @@ #define CONFIG_CPU_PXA25X 1 /* Intel PXA255 CPU */ #define CONFIG_PALMTC 1 /* Palm Tungsten|C board */ +/* we will never enable dcache, because we have to setup MMU first */ +#define CONFIG_SYS_DCACHE_OFF + /* * Environment settings */ diff --git a/include/configs/paz00.h b/include/configs/paz00.h index 5603de96253..38c79cfc2b5 100644 --- a/include/configs/paz00.h +++ b/include/configs/paz00.h @@ -45,8 +45,11 @@ #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION +#define CONFIG_FS_EXT4 +#define CONFIG_FS_FAT #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 894f38bd7db..eb13bb3a671 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -34,6 +34,7 @@ #define CONFIG_S5P 1 /* which is in a S5P Family */ #define CONFIG_EXYNOS4210 1 /* which is in a EXYNOS4210 */ #define CONFIG_UNIVERSAL 1 /* working with Universal */ +#define CONFIG_TIZEN 1 /* TIZEN lib */ #include <asm/arch/cpu.h> /* get chip and board defs */ @@ -56,6 +57,8 @@ #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG #define CONFIG_CMDLINE_EDITING +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) @@ -261,4 +264,37 @@ #define CONFIG_USB_GADGET_S3C_UDC_OTG #define CONFIG_USB_GADGET_DUALSPEED +/* + * SPI Settings + */ +#define CONFIG_SOFT_SPI +#define CONFIG_SOFT_SPI_MODE SPI_MODE_3 +#define CONFIG_SOFT_SPI_GPIO_SCLK exynos4_gpio_part2_get_nr(y3, 1) +#define CONFIG_SOFT_SPI_GPIO_MOSI exynos4_gpio_part2_get_nr(y3, 3) +#define CONFIG_SOFT_SPI_GPIO_MISO exynos4_gpio_part2_get_nr(y3, 0) +#define CONFIG_SOFT_SPI_GPIO_CS exynos4_gpio_part2_get_nr(y4, 3) + +#define SPI_DELAY udelay(1) +#undef SPI_INIT +#define SPI_SCL(bit) universal_spi_scl(bit) +#define SPI_SDA(bit) universal_spi_sda(bit) +#define SPI_READ universal_spi_read() +#ifndef __ASSEMBLY__ +void universal_spi_scl(int bit); +void universal_spi_sda(int bit); +int universal_spi_read(void); +#endif + +/* + * LCD Settings + */ +#define CONFIG_EXYNOS_FB +#define CONFIG_LCD +#define CONFIG_CMD_BMP +#define CONFIG_BMP_32BPP +#define CONFIG_LD9040 +#define CONFIG_EXYNOS_MIPI_DSIM +#define CONFIG_VIDEO_BMP_GZIP +#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((520 * 120 * 4) + (1 << 12)) + #endif /* __CONFIG_H */ diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index ab10bd0abc7..94116f116a5 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -54,6 +54,7 @@ #define CONFIG_MACH_TYPE MACH_TYPE_SEABOARD #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT /* Make sure LCD init is complete */ /* I2C */ #define CONFIG_TEGRA_I2C @@ -71,8 +72,11 @@ #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION +#define CONFIG_FS_EXT4 +#define CONFIG_FS_FAT #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC @@ -102,7 +106,18 @@ /* USB keyboard */ #define CONFIG_USB_KEYBOARD -#include "tegra-common-post.h" +#undef TEGRA_DEVICE_SETTINGS +#define TEGRA_DEVICE_SETTINGS "stdin=serial,tegra-kbc\0" \ + "stdout=serial,lcd\0" \ + "stderr=serial,lcd\0" + +/* LCD support */ +#define CONFIG_LCD +#define CONFIG_PWM_TEGRA +#define CONFIG_VIDEO_TEGRA +#define LCD_BPP LCD_COLOR16 +#define CONFIG_SYS_WHITE_ON_BLACK +#define CONFIG_CONSOLE_SCROLL_LINES 10 /* NAND support */ #define CONFIG_CMD_NAND @@ -111,6 +126,6 @@ /* Max number of NAND devices */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 -/* Somewhat oddly, the NAND base address must be a config option */ -#define CONFIG_SYS_NAND_BASE NV_PA_NAND_BASE +#include "tegra-common-post.h" + #endif /* __CONFIG_H */ diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h index c0f86228b08..e412da8c9d8 100644 --- a/include/configs/smdk5250.h +++ b/include/configs/smdk5250.h @@ -163,7 +163,6 @@ #undef CONFIG_CMD_IMLS #define CONFIG_IDENT_STRING " for SMDK5250" -#define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_SECURE_BL1_ONLY @@ -188,6 +187,11 @@ /* U-boot copy size from boot Media to DRAM.*/ #define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512) #define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512) + +#define OM_STAT (0x1f << 1) +#define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058 +#define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE) + #define CONFIG_DOS_PARTITION #define CONFIG_IRAM_STACK 0x02050000 @@ -204,6 +208,32 @@ #define CONFIG_MAX_I2C_NUM 8 #define CONFIG_SYS_I2C_SLAVE 0x0 +/* PMIC */ +#define CONFIG_PMIC +#define CONFIG_PMIC_I2C +#define CONFIG_PMIC_MAX77686 + +/* SPI */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_SPI_FLASH + +#ifdef CONFIG_SPI_FLASH +#define CONFIG_EXYNOS_SPI +#define CONFIG_CMD_SF +#define CONFIG_CMD_SPI +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define CONFIG_SF_DEFAULT_SPEED 50000000 +#define EXYNOS5_SPI_NUM_CONTROLLERS 5 +#endif + +#ifdef CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_MODE SPI_MODE_0 +#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE +#define CONFIG_ENV_SPI_BUS 1 +#define CONFIG_ENV_SPI_MAX_HZ 50000000 +#endif + /* Ethernet Controllor Driver */ #ifdef CONFIG_CMD_NET #define CONFIG_SMC911X @@ -212,6 +242,20 @@ #define CONFIG_ENV_SROM_BANK 1 #endif /*CONFIG_CMD_NET*/ +/* Enable PXE Support */ +#ifdef CONFIG_CMD_NET +#define CONFIG_CMD_PXE +#define CONFIG_MENU +#endif + +/* Sound */ +#define CONFIG_CMD_SOUND +#ifdef CONFIG_CMD_SOUND +#define CONFIG_SOUND +#define CONFIG_I2S +#define CONFIG_SOUND_WM8994 +#endif + /* Enable devicetree support */ #define CONFIG_OF_LIBFDT diff --git a/include/configs/tec.h b/include/configs/tec.h index 140d2e66327..200cf66647c 100644 --- a/include/configs/tec.h +++ b/include/configs/tec.h @@ -54,7 +54,6 @@ #define CONFIG_CMD_NAND #define CONFIG_TEGRA_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE NV_PA_NAND_BASE /* Environment in NAND, aligned to start of last sector */ #define CONFIG_ENV_IS_IN_NAND diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index 6f310bee601..ab62e7127d3 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -30,18 +30,6 @@ #else -#ifdef CONFIG_CMD_EXT2 -#define BOOT_FSTYPE_EXT2 "ext2 " -#else -#define BOOT_FSTYPE_EXT2 "" -#endif - -#ifdef CONFIG_CMD_FAT -#define BOOT_FSTYPE_FAT "fat" -#else -#define BOOT_FSTYPE_FAT "" -#endif - #ifdef CONFIG_CMD_MMC #define BOOTCMDS_MMC \ "mmc_boot=" \ @@ -98,7 +86,7 @@ "rootpart=1\0" \ \ "script_boot=" \ - "if ${fs}load ${devtype} ${devnum}:${rootpart} " \ + "if load ${devtype} ${devnum}:${rootpart} " \ "${scriptaddr} ${prefix}${script}; then " \ "echo ${script} found! Executing ...;" \ "source ${scriptaddr};" \ @@ -106,11 +94,9 @@ \ "scan_boot=" \ "echo Scanning ${devtype} ${devnum}...; " \ - "for fs in ${boot_fstypes}; do " \ - "for prefix in ${boot_prefixes}; do " \ - "for script in ${boot_scripts}; do " \ - "run script_boot; " \ - "done; " \ + "for prefix in ${boot_prefixes}; do " \ + "for script in ${boot_scripts}; do " \ + "run script_boot; " \ "done; " \ "done;\0" \ \ @@ -120,11 +106,6 @@ BOOT_TARGETS_DHCP " " \ "\0" \ \ - "boot_fstypes=" \ - BOOT_FSTYPE_EXT2 " " \ - BOOT_FSTYPE_FAT " " \ - "\0" \ - \ "boot_prefixes=/ /boot/\0" \ \ "boot_scripts=boot.scr.uimg boot.scr\0" \ @@ -226,12 +207,24 @@ #ifdef CONFIG_EFI_PARTITION #undef CONFIG_EFI_PARTITION #endif +#ifdef CONFIG_CMD_FS_GENERIC +#undef CONFIG_CMD_FS_GENERIC +#endif +#ifdef CONFIG_CMD_EXT4 +#undef CONFIG_CMD_EXT4 +#endif #ifdef CONFIG_CMD_EXT2 #undef CONFIG_CMD_EXT2 #endif #ifdef CONFIG_CMD_FAT #undef CONFIG_CMD_FAT #endif +#ifdef CONFIG_FS_EXT4 +#undef CONFIG_FS_EXT4 +#endif +#ifdef CONFIG_FS_FAT +#undef CONFIG_FS_FAT +#endif /* remove USB */ #ifdef CONFIG_USB_EHCI diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index 5c0833a4d8c..fe07f72260d 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -38,6 +38,9 @@ #include <asm/arch/tegra.h> /* get chip and board defs */ +/* Align LCD to 1MB boundary */ +#define CONFIG_LCD_ALIGNMENT MMU_SECTION_SIZE + /* * Display CPU and Board information */ diff --git a/include/configs/trats.h b/include/configs/trats.h index 355029e8d83..78d7ea3e7ef 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -189,12 +189,17 @@ #define CONFIG_SYS_HZ 1000 -/* TRATS has 2 banks of DRAM */ -#define CONFIG_NR_DRAM_BANKS 2 -#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* LDDDR2 DMC 0 */ -#define PHYS_SDRAM_1_SIZE (512 << 20) /* 512 MB in CS 0 */ -#define PHYS_SDRAM_2 0x50000000 /* LPDDR2 DMC 1 */ -#define PHYS_SDRAM_2_SIZE (512 << 20) /* 512 MB in CS 0 */ +/* TRATS has 4 banks of DRAM */ +#define CONFIG_NR_DRAM_BANKS 4 +#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE +#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE) +#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE)) +#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE)) +#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */ diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h index eeb0dbe237b..334d3a3b8b8 100644 --- a/include/configs/trimslice.h +++ b/include/configs/trimslice.h @@ -69,8 +69,11 @@ #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION +#define CONFIG_FS_EXT4 +#define CONFIG_FS_FAT #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC /* Environment in SPI */ #define CONFIG_ENV_IS_IN_SPI_FLASH @@ -80,6 +83,7 @@ #define CONFIG_ENV_OFFSET (512 * 1024) /* USB Host support */ +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE diff --git a/include/configs/ventana.h b/include/configs/ventana.h index 4c9b31cce30..b55ebc9bfc0 100644 --- a/include/configs/ventana.h +++ b/include/configs/ventana.h @@ -52,8 +52,11 @@ #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION +#define CONFIG_FS_EXT4 +#define CONFIG_FS_FAT #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC diff --git a/include/configs/vision2.h b/include/configs/vision2.h index a72010ff212..226d04901f5 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -196,6 +196,7 @@ /* 166 MHz DDR RAM */ #define CONFIG_SYS_DDR_CLKSEL 0 #define CONFIG_SYS_CLKTL_CBCDR 0x19239100 +#define CONFIG_SYS_MAIN_PWR_ON #define CONFIG_SYS_NO_FLASH diff --git a/include/configs/whistler.h b/include/configs/whistler.h index 1c7803b2660..1e554d81647 100644 --- a/include/configs/whistler.h +++ b/include/configs/whistler.h @@ -61,8 +61,11 @@ #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION +#define CONFIG_FS_EXT4 +#define CONFIG_FS_FAT #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC /* * Environment in eMMC, at the end of 2nd "boot sector". Note: This assumes diff --git a/include/configs/woodburn.h b/include/configs/woodburn.h new file mode 100644 index 00000000000..95a71c45b20 --- /dev/null +++ b/include/configs/woodburn.h @@ -0,0 +1,34 @@ +/* + * (C) Copyright 2011, Stefano Babic <sbabic@denx.de> + * + * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * Configuration for the woodburn board. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/imx-regs.h> +#include "woodburn_common.h" + +/* Set TEXT at the beginning of the NOR flash */ +#define CONFIG_SYS_TEXT_BASE 0xA0000000 +#define CONFIG_BOARD_EARLY_INIT_F + +#endif /* __CONFIG_H */ diff --git a/include/configs/woodburn_common.h b/include/configs/woodburn_common.h new file mode 100644 index 00000000000..58a96cffce6 --- /dev/null +++ b/include/configs/woodburn_common.h @@ -0,0 +1,313 @@ +/* + * (C) Copyright 2011, Stefano Babic <sbabic@denx.de> + * + * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * Configuration for the woodburn board. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __WOODBURN_COMMON_CONFIG_H +#define __WOODBURN_COMMON_CONFIG_H + +#include <asm/arch/imx-regs.h> + + /* High Level Configuration Options */ +#define CONFIG_ARM1136 /* This is an arm1136 CPU core */ +#define CONFIG_MX35 +#define CONFIG_MX35_HCLK_FREQ 24000000 + +#define CONFIG_SYS_DCACHE_OFF +#define CONFIG_SYS_CACHELINE_SIZE 32 + +#define CONFIG_DISPLAY_CPUINFO + +/* Only in case the value is not present in mach-types.h */ +#ifndef MACH_TYPE_FLEA3 +#define MACH_TYPE_FLEA3 3668 +#endif + +#define CONFIG_MACH_TYPE MACH_TYPE_FLEA3 + +/* This is required to setup the ESDC controller */ + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_REVISION_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024) + +/* + * Hardware drivers + */ +#define CONFIG_HARD_I2C +#define CONFIG_I2C_MXC +#define CONFIG_SYS_I2C_BASE I2C1_BASE_ADDR +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_MXC_SPI +#define CONFIG_MXC_GPIO + +/* PMIC Controller */ +#define CONFIG_PMIC +#define CONFIG_PMIC_I2C +#define CONFIG_PMIC_FSL_MC13892 +#define CONFIG_PMIC_FSL +#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8 +#define CONFIG_RTC_MC13XXX + + +/* mmc driver */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_NUM 1 + +/* + * UART (console) + */ +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_BASE + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* + * Command definition + */ + +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_DNS + +#define CONFIG_CMD_NAND +#define CONFIG_CMD_CACHE + +#define CONFIG_CMD_I2C +#define CONFIG_CMD_SPI +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET + +#define CONFIG_CMD_MMC +#define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT + +#define CONFIG_CMD_GPIO +#define CONFIG_MXC_GPIO + +#define CONFIG_NET_RETRY_COUNT 100 + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ + + +/* + * Ethernet on SOC (FEC) + */ +#define CONFIG_FEC_MXC +#define IMX_FEC_BASE FEC_BASE_ADDR +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL +#define CONFIG_FEC_MXC_PHYADDR 0x1 + +#define CONFIG_MII +#define CONFIG_DISCOVER_PHY + +#define CONFIG_ARP_TIMEOUT 200UL + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "woodburn U-Boot > " +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ + +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x10000 + +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_HZ 1000 + + +/* + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/* + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 CSD0_BASE_ADDR +#define PHYS_SDRAM_1_SIZE (256 * 1024 * 1024) + +#define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR + +#define CONFIG_SYS_GBL_DATA_OFFSET (LOW_LEVEL_SRAM_STACK - \ + IRAM_BASE_ADDR - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (IRAM_BASE_ADDR + \ + CONFIG_SYS_GBL_DATA_OFFSET) + +/* + * MTD Command for mtdparts + */ +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_DEVICE +#define CONFIG_FLASH_CFI_MTD +#define CONFIG_MTD_PARTITIONS +#define MTDIDS_DEFAULT "nand0=mxc_nand,nor0=physmap-flash.0" +#define MTDPARTS_DEFAULT "mtdparts=mxc_nand:50m(root1)," \ + "32m(rootfb)," \ + "64m(pcache)," \ + "64m(app1)," \ + "10m(app2),-(spool);" \ + "physmap-flash.0:512k(u-boot),64k(env1)," \ + "64k(env2),3776k(kernel1),3776k(kernel2)" + +/* + * FLASH and environment organization + */ +#define CONFIG_SYS_FLASH_BASE CS0_BASE_ADDR +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ +/* Monitor at beginning of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) + +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE + +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE + +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ + CONFIG_SYS_MONITOR_LEN) + +#define CONFIG_ENV_IS_IN_FLASH + +/* + * CFI FLASH driver setup + */ +#define CONFIG_SYS_FLASH_CFI /* Flash memory is CFI compliant */ +#define CONFIG_FLASH_CFI_DRIVER + +/* A non-standard buffered write algorithm */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* faster */ +#define CONFIG_SYS_FLASH_PROTECTION /* Use hardware sector protection */ + +/* + * NAND FLASH driver setup + */ +#define CONFIG_NAND_MXC +#define CONFIG_NAND_MXC_V1_1 +#define CONFIG_MXC_NAND_REGS_BASE (NFC_BASE_ADDR) +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE (NFC_BASE_ADDR) +#define CONFIG_MXC_NAND_HWECC +#define CONFIG_SYS_NAND_LARGEPAGE + +#if 0 +#define CONFIG_MTD_DEBUG +#define CONFIG_MTD_DEBUG_VERBOSE 7 +#endif +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* + * Default environment and default scripts + * to update uboot and load kernel + */ +#define xstr(s) str(s) +#define str(s) #s + +#define CONFIG_HOSTNAME woodburn +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip_sta=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ + "addip=if test -n ${ipdyn};then run addip_dyn;" \ + "else run addip_sta;fi\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "addtty=setenv bootargs ${bootargs}" \ + " console=ttymxc0,${baudrate}\0" \ + "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ + "loadaddr=80800000\0" \ + "kernel_addr_r=80800000\0" \ + "hostname=" xstr(CONFIG_HOSTNAME) "\0" \ + "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \ + "ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0" \ + "flash_self=run ramargs addip addtty addmtd addmisc;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ + "bootm ${kernel_addr}\0" \ + "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ + "run nfsargs addip addtty addmtd addmisc;" \ + "bootm ${kernel_addr_r}\0" \ + "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \ + "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \ + "net_self=if run net_self_load;then " \ + "run ramargs addip addtty addmtd addmisc;" \ + "bootm ${kernel_addr_r} ${ramdisk_addr_r};" \ + "else echo Images not loades;fi\0" \ + "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \ + "load=tftp ${loadaddr} ${u-boot}\0" \ + "uboot_addr=" xstr(CONFIG_SYS_MONITOR_BASE) "\0" \ + "update=protect off ${uboot_addr} +80000;" \ + "erase ${uboot_addr} +80000;" \ + "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \ + "upd=if run load;then echo Updating u-boot;if run update;" \ + "then echo U-Boot updated;" \ + "else echo Error updating u-boot !;" \ + "echo Board without bootloader !!;" \ + "fi;" \ + "else echo U-Boot not downloaded..exiting;fi\0" \ + "bootcmd=run net_nfs\0" + +#endif /* __CONFIG_H */ diff --git a/include/configs/woodburn_sd.h b/include/configs/woodburn_sd.h new file mode 100644 index 00000000000..63185c54324 --- /dev/null +++ b/include/configs/woodburn_sd.h @@ -0,0 +1,60 @@ +/* + * (C) Copyright 2011, Stefano Babic <sbabic@denx.de> + * + * (C) Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * Configuration for the woodburn board. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/imx-regs.h> +#include "woodburn_common.h" + +/* Set TEXT in RAM */ +#define CONFIG_SYS_TEXT_BASE 0x82000000 + +#define CONFIG_BOOT_INTERNAL + +/* + * SPL + */ +#define CONFIG_SPL +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm1136/u-boot-spl.lds" +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x100 /* address 0x60000 */ +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 /* 512 KB */ +#define CONFIG_SPL_GPIO_SUPPORT + +#define CONFIG_SPL_TEXT_BASE 0x10002300 +#define CONFIG_SPL_MAX_SIZE (64 * 1024) /* 8 KB for stack */ +#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK + +#define CONFIG_SYS_SPL_MALLOC_START 0x8f000000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 +#define CONFIG_SPL_BSS_START_ADDR 0x8f080000 /* end of RAM */ +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 + +#endif /* __CONFIG_H */ diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h index bf6394a90ae..b92f70b538d 100644 --- a/include/configs/zipitz2.h +++ b/include/configs/zipitz2.h @@ -41,6 +41,9 @@ #define CONFIG_ENV_ADDR 0x40000 #define CONFIG_ENV_SIZE 0x20000 +/* we will never enable dcache, because we have to setup MMU first */ +#define CONFIG_SYS_DCACHE_OFF + #define CONFIG_SYS_MALLOC_LEN (128*1024) #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h index 447683a4905..e9216d9b64b 100644 --- a/include/configs/zmx25.h +++ b/include/configs/zmx25.h @@ -109,9 +109,9 @@ #define CONFIG_USB_EHCI /* Enable EHCI USB support */ #define CONFIG_USB_EHCI_MXC #define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#define CONFIG_MXC_USB_PORT 2 -#define CONFIG_MXC_USB_PORTSC 0xC0000000 -#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_MXC_USB_PORT 1 +#define CONFIG_MXC_USB_PORTSC MXC_EHCI_MODE_SERIAL +#define CONFIG_MXC_USB_FLAGS (MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN) #define CONFIG_EHCI_IS_TDI #define CONFIG_USB_STORAGE #define CONFIG_DOS_PARTITION diff --git a/include/fdtdec.h b/include/fdtdec.h index 5164ce24e61..70d0e979d12 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -68,6 +68,8 @@ enum fdt_compat_id { COMPAT_NVIDIA_TEGRA20_EMC_TABLE, /* Tegra20 memory timing table */ COMPAT_NVIDIA_TEGRA20_KBC, /* Tegra20 Keyboard */ COMPAT_NVIDIA_TEGRA20_NAND, /* Tegra2 NAND controller */ + COMPAT_NVIDIA_TEGRA20_PWM, /* Tegra 2 PWM controller */ + COMPAT_NVIDIA_TEGRA20_DC, /* Tegra 2 Display controller */ COMPAT_COUNT, }; diff --git a/include/i2s.h b/include/i2s.h new file mode 100644 index 00000000000..75ae75cf235 --- /dev/null +++ b/include/i2s.h @@ -0,0 +1,127 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * R. Chandrasekar <rcsekar@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __I2S_H__ +#define __I2S_H__ + +/* + * DAI hardware audio formats. + * + * Describes the physical PCM data formating and clocking. Add new formats + * to the end. + */ +#define SND_SOC_DAIFMT_I2S 1 /* I2S mode */ +#define SND_SOC_DAIFMT_RIGHT_J 2 /* Right Justified mode */ +#define SND_SOC_DAIFMT_LEFT_J 3 /* Left Justified mode */ +#define SND_SOC_DAIFMT_DSP_A 4 /* L data MSB after FRM LRC */ +#define SND_SOC_DAIFMT_DSP_B 5 /* L data MSB during FRM LRC */ +#define SND_SOC_DAIFMT_AC97 6 /* AC97 */ +#define SND_SOC_DAIFMT_PDM 7 /* Pulse density modulation */ + +/* left and right justified also known as MSB and LSB respectively */ +#define SND_SOC_DAIFMT_MSB SND_SOC_DAIFMT_LEFT_J +#define SND_SOC_DAIFMT_LSB SND_SOC_DAIFMT_RIGHT_J + +/* + * DAI hardware signal inversions. + * + * Specifies whether the DAI can also support inverted clocks for the specified + * format. + */ +#define SND_SOC_DAIFMT_NB_NF (1 << 8) /* normal bit clock + frame */ +#define SND_SOC_DAIFMT_NB_IF (2 << 8) /* normal BCLK + inv FRM */ +#define SND_SOC_DAIFMT_IB_NF (3 << 8) /* invert BCLK + nor FRM */ +#define SND_SOC_DAIFMT_IB_IF (4 << 8) /* invert BCLK + FRM */ + +/* + * DAI hardware clock masters. + * + * This is wrt the codec, the inverse is true for the interface + * i.e. if the codec is clk and FRM master then the interface is + * clk and frame slave. + */ +#define SND_SOC_DAIFMT_CBM_CFM (1 << 12) /* codec clk & FRM master */ +#define SND_SOC_DAIFMT_CBS_CFM (2 << 12) /* codec clk slave & FRM master */ +#define SND_SOC_DAIFMT_CBM_CFS (3 << 12) /* codec clk master & frame slave */ +#define SND_SOC_DAIFMT_CBS_CFS (4 << 12) /* codec clk & FRM slave */ + +#define SND_SOC_DAIFMT_FORMAT_MASK 0x000f +#define SND_SOC_DAIFMT_CLOCK_MASK 0x00f0 +#define SND_SOC_DAIFMT_INV_MASK 0x0f00 +#define SND_SOC_DAIFMT_MASTER_MASK 0xf000 + +/* + * Master Clock Directions + */ +#define SND_SOC_CLOCK_IN 0 +#define SND_SOC_CLOCK_OUT 1 + +/* I2S Tx Control */ +#define I2S_TX_ON 1 +#define I2S_TX_OFF 0 + +#define FIFO_LENGTH 64 + +/* I2s Registers */ +struct i2s_reg { + unsigned int con; /* base + 0 , Control register */ + unsigned int mod; /* Mode register */ + unsigned int fic; /* FIFO control register */ + unsigned int psr; /* Reserved */ + unsigned int txd; /* Transmit data register */ + unsigned int rxd; /* Receive Data Register */ +}; + +/* This structure stores the i2s related information */ +struct i2stx_info { + unsigned int rfs; /* LR clock frame size */ + unsigned int bfs; /* Bit slock frame size */ + unsigned int audio_pll_clk; /* Audio pll frequency in Hz */ + unsigned int samplingrate; /* sampling rate */ + unsigned int bitspersample; /* bits per sample */ + unsigned int channels; /* audio channels */ + unsigned int base_address; /* I2S Register Base */ +}; + +/* + * Sends the given data through i2s tx + * + * @param pi2s_tx pointer of i2s transmitter parameter structure. + * @param data address of the data buffer + * @param data_size array size of the int buffer (total size / size of int) + * + * @return int value 0 for success, -1 in case of error + */ +int i2s_transfer_tx_data(struct i2stx_info *pi2s_tx, unsigned *data, + unsigned long data_size); + +/* + * Initialise i2s transmiter + * + * @param pi2s_tx pointer of i2s transmitter parameter structure. + * + * @return int value 0 for success, -1 in case of error + */ +int i2s_tx_init(struct i2stx_info *pi2s_tx); + +#endif /* __I2S_H__ */ diff --git a/include/lcd.h b/include/lcd.h index 2517d39d414..c24164a9de0 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -57,6 +57,14 @@ extern void lcd_initcolregs (void); extern struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp); extern int bmp_display(ulong addr, int x, int y); +/** + * Set whether we need to flush the dcache when changing the LCD image. This + * defaults to off. + * + * @param flush non-zero to flush cache after update, 0 to skip + */ +void lcd_set_flush_dcache(int flush); + #if defined CONFIG_MPC823 /* * LCD controller stucture for MPC823 CPU @@ -333,6 +341,9 @@ void lcd_position_cursor(unsigned col, unsigned row); /* Allow boards to customize the information displayed */ void lcd_show_board_info(void); +/* Return the size of the LCD frame buffer, and the line length */ +int lcd_get_size(int *line_length); + /************************************************************************/ /* ** BITMAP DISPLAY SUPPORT */ /************************************************************************/ diff --git a/include/ld9040.h b/include/ld9040.h new file mode 100644 index 00000000000..fe99390e515 --- /dev/null +++ b/include/ld9040.h @@ -0,0 +1,32 @@ +/* + * ld9040 AMOLED LCD panel driver. + * + * Copyright (C) 2012 Samsung Electronics + * Donghwa Lee <dh09.lee@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __LD9040_H_ +#define __LD9040_H_ + +void ld9040_cfg_ldo(void); +void ld9040_enable_ldo(unsigned int onoff); + +#endif /* __LD9040_H_ */ diff --git a/include/max77686_pmic.h b/include/max77686_pmic.h new file mode 100644 index 00000000000..d949aced092 --- /dev/null +++ b/include/max77686_pmic.h @@ -0,0 +1,158 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * Rajeshwari Shinde <rajeshwari.s@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MAX77686_H_ +#define __MAX77686_H_ + +enum { + MAX77686_REG_PMIC_ID = 0x0, + MAX77686_REG_PMIC_INTSRC, + MAX77686_REG_PMIC_INT1, + MAX77686_REG_PMIC_INT2, + MAX77686_REG_PMIC_INT1MSK, + MAX77686_REG_PMIC_INT2MSK, + + MAX77686_REG_PMIC_STATUS1, + MAX77686_REG_PMIC_STATUS2, + + MAX77686_REG_PMIC_PWRON, + MAX77686_REG_PMIC_ONOFFDELAY, + MAX77686_REG_PMIC_MRSTB, + + MAX77686_REG_PMIC_BUCK1CRTL = 0x10, + MAX77686_REG_PMIC_BUCK1OUT, + MAX77686_REG_PMIC_BUCK2CTRL1, + MAX77686_REG_PMIC_BUCK234FREQ, + MAX77686_REG_PMIC_BUCK2DVS1, + MAX77686_REG_PMIC_BUCK2DVS2, + MAX77686_REG_PMIC_BUCK2DVS3, + MAX77686_REG_PMIC_BUCK2DVS4, + MAX77686_REG_PMIC_BUCK2DVS5, + MAX77686_REG_PMIC_BUCK2DVS6, + MAX77686_REG_PMIC_BUCK2DVS7, + MAX77686_REG_PMIC_BUCK2DVS8, + MAX77686_REG_PMIC_BUCK3CTRL, + MAX77686_REG_PMIC_BUCK3DVS1, + MAX77686_REG_PMIC_BUCK3DVS2, + MAX77686_REG_PMIC_BUCK3DVS3, + MAX77686_REG_PMIC_BUCK3DVS4, + MAX77686_REG_PMIC_BUCK3DVS5, + MAX77686_REG_PMIC_BUCK3DVS6, + MAX77686_REG_PMIC_BUCK3DVS7, + MAX77686_REG_PMIC_BUCK3DVS8, + MAX77686_REG_PMIC_BUCK4CTRL1, + MAX77686_REG_PMIC_BUCK4DVS1 = 0x28, + MAX77686_REG_PMIC_BUCK4DVS2, + MAX77686_REG_PMIC_BUCK4DVS3, + MAX77686_REG_PMIC_BUCK4DVS4, + MAX77686_REG_PMIC_BUCK4DVS5, + MAX77686_REG_PMIC_BUCK4DVS6, + MAX77686_REG_PMIC_BUCK4DVS7, + MAX77686_REG_PMIC_BUCK4DVS8, + MAX77686_REG_PMIC_BUCK5CTRL, + MAX77686_REG_PMIC_BUCK5OUT, + MAX77686_REG_PMIC_BUCK6CRTL, + MAX77686_REG_PMIC_BUCK6OUT, + MAX77686_REG_PMIC_BUCK7CRTL, + MAX77686_REG_PMIC_BUCK7OUT, + MAX77686_REG_PMIC_BUCK8CRTL, + MAX77686_REG_PMIC_BUCK8OUT, + MAX77686_REG_PMIC_BUCK9CRTL, + MAX77686_REG_PMIC_BUCK9OUT, + + MAX77686_REG_PMIC_LDO1CTRL1 = 0x40, + MAX77686_REG_PMIC_LDO2CTRL1, + MAX77686_REG_PMIC_LDO3CTRL1, + MAX77686_REG_PMIC_LDO4CTRL1, + MAX77686_REG_PMIC_LDO5CTRL1, + MAX77686_REG_PMIC_LDO6CTRL1, + MAX77686_REG_PMIC_LDO7CTRL1, + MAX77686_REG_PMIC_LDO8CTRL1, + MAX77686_REG_PMIC_LDO9CTRL1, + MAX77686_REG_PMIC_LDO10CTRL1, + MAX77686_REG_PMIC_LDO11CTRL1, + MAX77686_REG_PMIC_LDO12CTRL1, + MAX77686_REG_PMIC_LDO13CTRL1, + MAX77686_REG_PMIC_LDO14CTRL1, + MAX77686_REG_PMIC_LDO15CTRL1, + MAX77686_REG_PMIC_LDO16CTRL1, + MAX77686_REG_PMIC_LDO17CTRL1, + MAX77686_REG_PMIC_LDO18CTRL1, + MAX77686_REG_PMIC_LDO19CTRL1, + MAX77686_REG_PMIC_LDO20CTRL1, + MAX77686_REG_PMIC_LDO21CTRL1, + MAX77686_REG_PMIC_LDO22CTRL1, + MAX77686_REG_PMIC_LDO23CTRL1, + MAX77686_REG_PMIC_LDO24CTRL1, + MAX77686_REG_PMIC_LDO25CTRL1, + MAX77686_REG_PMIC_LDO26CTRL1, + MAX77686_REG_PMIC_LDO1CTRL2, + MAX77686_REG_PMIC_LDO2CTRL2, + MAX77686_REG_PMIC_LDO3CTRL2, + MAX77686_REG_PMIC_LDO4CTRL2, + MAX77686_REG_PMIC_LDO5CTRL2, + MAX77686_REG_PMIC_LDO6CTRL2, + MAX77686_REG_PMIC_LDO7CTRL2, + MAX77686_REG_PMIC_LDO8CTRL2, + MAX77686_REG_PMIC_LDO9CTRL2, + MAX77686_REG_PMIC_LDO10CTRL2, + MAX77686_REG_PMIC_LDO11CTRL2, + MAX77686_REG_PMIC_LDO12CTRL2, + MAX77686_REG_PMIC_LDO13CTRL2, + MAX77686_REG_PMIC_LDO14CTRL2, + MAX77686_REG_PMIC_LDO15CTRL2, + MAX77686_REG_PMIC_LDO16CTRL2, + MAX77686_REG_PMIC_LDO17CTRL2, + MAX77686_REG_PMIC_LDO18CTRL2, + MAX77686_REG_PMIC_LDO19CTRL2, + MAX77686_REG_PMIC_LDO20CTRL2, + MAX77686_REG_PMIC_LDO21CTRL2, + MAX77686_REG_PMIC_LDO22CTRL2, + MAX77686_REG_PMIC_LDO23CTRL2, + MAX77686_REG_PMIC_LDO24CTRL2, + MAX77686_REG_PMIC_LDO25CTRL2, + MAX77686_REG_PMIC_LDO26CTRL2, + + MAX77686_REG_PMIC_BBAT = 0x7e, + MAX77686_REG_PMIC_32KHZ, + + PMIC_NUM_OF_REGS, +}; + +/* I2C device address for pmic max77686 */ +#define MAX77686_I2C_ADDR (0x12 >> 1) + +enum { + REG_DISABLE = 0, + REG_ENABLE +}; + +enum { + LDO_OFF = 0, + LDO_ON, + + DIS_LDO = (0x00 << 6), + EN_LDO = (0x3 << 6), +}; + +#endif /* __MAX77686_PMIC_H_ */ diff --git a/include/mc34704.h b/include/mc34704.h new file mode 100644 index 00000000000..6611d54ae8c --- /dev/null +++ b/include/mc34704.h @@ -0,0 +1,49 @@ +/* + * (C) Copyright 2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + */ + +#ifndef __MC34704_H__ +#define __MC34704_H__ + +enum { + MC34704_RESERVED0_REG = 0, /* 0x00 */ + MC34704_GENERAL1_REG, /* 0x01 */ + MC34704_GENERAL2_REG, /* 0x02 */ + MC34704_GENERAL3_REG, /* 0x03 */ + MC34704_RESERVED4_REG, /* 0x04 */ + MC34704_VGSET2_REG, /* 0x05 */ + MC34704_REG2SET1_REG, /* 0x06 */ + MC34704_REG2SET2_REG, /* 0x07 */ + MC34704_REG3SET1_REG, /* 0x08 */ + MC34704_REG3SET2_REG, /* 0x09 */ + MC34704_REG4SET1_REG, /* 0x0a */ + MC34704_REG4SET2_REG, /* 0x0b */ + MC34704_REG5SET1_REG, /* 0x0c */ + MC34704_REG5SET2_REG, /* 0x0d */ + MC34704_REG5SET3_REG, /* 0x0e */ + MC34704_RESERVEDF_REG, /* 0x0f */ + MC34704_RESERVED10_REG, /* 0x10 */ + MC34704_RESERVED11_REG, /* 0x11 */ + MC34704_RESERVED12_REG, /* 0x12 */ + MC34704_FSW2SET_REG, /* 0x13 */ + MC34704_RESERVED14_REG, /* 0x14 */ + MC34704_REG8SET1_REG, /* 0x15 */ + MC34704_REG8SET2_REG, /* 0x16 */ + MC34704_REG8SET3_REG, /* 0x17 */ + MC34704_FAULTS_REG, /* 0x18 */ + MC34704_I2CSET1, /* 0x19 */ + MC34704_NUM_OF_REGS, +}; + +/* GENERAL2 register fields */ +#define ONOFFE (1 << 0) +#define ONOFFD (1 << 1) +#define ALLOFF (1 << 4) + +#endif /* __MC34704_H__ */ diff --git a/include/power/max8998_pmic.h b/include/power/max8998_pmic.h index ca21f882c29..0e559f986aa 100644 --- a/include/power/max8998_pmic.h +++ b/include/power/max8998_pmic.h @@ -76,7 +76,9 @@ enum { #define MAX8998_LDO3 (1 << 2) #define MAX8998_LDO4 (1 << 1) +#define MAX8998_LDO7 (1 << 6) #define MAX8998_LDO8 (1 << 5) +#define MAX8998_LDO17 (1 << 4) #define MAX8998_SAFEOUT1 (1 << 4) #define MAX8998_I2C_ADDR (0xCC >> 1) diff --git a/include/sound.h b/include/sound.h new file mode 100644 index 00000000000..ea0b1158f80 --- /dev/null +++ b/include/sound.h @@ -0,0 +1,62 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * R. Chandrasekar < rcsekar@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __SOUND_H__ +#define __SOUND_H__ + +/* sound codec enum */ +enum en_sound_codec { + CODEC_WM_8994, + CODEC_WM_8995, + CODEC_MAX +}; + +/* sound codec enum */ +enum sound_compat { + AUDIO_COMPAT_SPI, + AUDIO_COMPAT_I2C, +}; + +/* Codec information structure to store the info from device tree */ +struct sound_codec_info { + int i2c_bus; + int i2c_dev_addr; + enum en_sound_codec codec_type; +}; + +/* + * Initialises audio sub system + * + * @return int value 0 for success, -1 for error + */ +int sound_init(void); + +/* + * plays the pcm data buffer in pcm_data.h through i2s1 to make the + * sine wave sound + * + * @return int 0 for success, -1 for error + */ +int sound_play(uint32_t msec, uint32_t frequency); + +#endif /* __SOUND__H__ */ diff --git a/include/usb/ehci-fsl.h b/include/usb/ehci-fsl.h index 28693020ece..a1438d6f94f 100644 --- a/include/usb/ehci-fsl.h +++ b/include/usb/ehci-fsl.h @@ -246,9 +246,33 @@ struct usb_ehci { /* * For MXC SOCs */ + +/* values for portsc field */ +#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23) +#define MXC_EHCI_FORCE_FS (1 << 24) +#define MXC_EHCI_UTMI_8BIT (0 << 28) +#define MXC_EHCI_UTMI_16BIT (1 << 28) +#define MXC_EHCI_SERIAL (1 << 29) +#define MXC_EHCI_MODE_UTMI (0 << 30) +#define MXC_EHCI_MODE_PHILIPS (1 << 30) +#define MXC_EHCI_MODE_ULPI (2 << 30) +#define MXC_EHCI_MODE_SERIAL (3 << 30) + +/* values for flags field */ +#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0) +#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0) +#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0) +#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0) +#define MXC_EHCI_INTERFACE_MASK (0xf) + #define MXC_EHCI_POWER_PINS_ENABLED (1 << 5) -#define MXC_EHCI_TTL_ENABLED (1 << 6) -#define MXC_EHCI_INTERNAL_PHY (1 << 7) +#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6) +#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7) +#define MXC_EHCI_TTL_ENABLED (1 << 8) + +#define MXC_EHCI_INTERNAL_PHY (1 << 9) +#define MXC_EHCI_IPPUE_DOWN (1 << 10) +#define MXC_EHCI_IPPUE_UP (1 << 11) /* Board-specific initialization */ int board_ehci_hcd_init(int port); diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 348144aa705..6dba4389f23 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -43,6 +43,8 @@ static const char * const compat_names[COMPAT_COUNT] = { COMPAT(NVIDIA_TEGRA20_EMC_TABLE, "nvidia,tegra20-emc-table"), COMPAT(NVIDIA_TEGRA20_KBC, "nvidia,tegra20-kbc"), COMPAT(NVIDIA_TEGRA20_NAND, "nvidia,tegra20-nand"), + COMPAT(NVIDIA_TEGRA20_PWM, "nvidia,tegra20-pwm"), + COMPAT(NVIDIA_TEGRA20_DC, "nvidia,tegra20-dc"), }; const char *fdtdec_get_compatible(enum fdt_compat_id id) diff --git a/nand_spl/board/freescale/mx31pdk/u-boot.lds b/nand_spl/board/freescale/mx31pdk/u-boot.lds index da49c100c5c..a26110f393d 100644 --- a/nand_spl/board/freescale/mx31pdk/u-boot.lds +++ b/nand_spl/board/freescale/mx31pdk/u-boot.lds @@ -54,6 +54,8 @@ SECTIONS . = ALIGN(4); + __image_copy_end = .; + .rel.dyn : { __rel_dyn_start = .; *(.rel*) diff --git a/spl/Makefile b/spl/Makefile index eacf4a2e10b..6dbb1055b6d 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -141,6 +141,12 @@ $(OBJTREE)/MLO.byteswap: $(obj)u-boot-spl.bin $(OBJTREE)/tools/mkimage -T omapimage -n byteswap \ -a $(CONFIG_SPL_TEXT_BASE) -d $< $@ +ifneq ($(CONFIG_IMX_CONFIG),) +$(OBJTREE)/SPL: $(obj)u-boot-spl.bin + $(OBJTREE)/tools/mkimage -n $(SRCTREE)/$(CONFIG_IMX_CONFIG) -T imximage \ + -e $(CONFIG_SPL_TEXT_BASE) -d $< $@ +endif + ALL-y += $(obj)u-boot-spl.bin ifdef CONFIG_SAMSUNG |