diff options
| -rw-r--r-- | arch/arm/mach-k3/am642_init.c | 33 | ||||
| -rw-r--r-- | configs/am64x_evm_r5_defconfig | 3 |
2 files changed, 36 insertions, 0 deletions
diff --git a/arch/arm/mach-k3/am642_init.c b/arch/arm/mach-k3/am642_init.c index 0c295e7fe28..c871e92330b 100644 --- a/arch/arm/mach-k3/am642_init.c +++ b/arch/arm/mach-k3/am642_init.c @@ -20,9 +20,15 @@ #include <dm/pinctrl.h> #include <mmc.h> #include <dm/root.h> +#include <command.h> #define CTRLMMR_MCU_RST_CTRL 0x04518170 +#define CTRLMMR_MCU_RST_SRC (MCU_CTRL_MMR0_BASE + 0x18178) +#define COLD_BOOT 0 +#define SW_POR_MCU BIT(24) +#define SW_POR_MAIN BIT(25) + static void ctrl_mmr_unlock(void) { /* Unlock all PADCFG_MMR1 module registers */ @@ -164,6 +170,7 @@ void board_init_f(ulong dummy) #if defined(CONFIG_K3_LOAD_SYSFW) || defined(CONFIG_K3_AM64_DDRSS) || defined(CONFIG_ESM_K3) struct udevice *dev; int ret; + int rst_src; #endif #if defined(CONFIG_CPU_V7R) @@ -206,6 +213,32 @@ void board_init_f(ulong dummy) k3_mmc_restart_clock); #endif +#if defined(CONFIG_CPU_V7R) + /* + * Errata ID i2331 CPSW: A device lockup can occur during the second + * read of any CPSW subsystem register after any MAIN domain power on + * reset (POR). A MAIN domain POR occurs using the hardware MCU_PORz + * signal, or via software using CTRLMMR_RST_CTRL.SW_MAIN_POR or + * CTRLMMR_MCU_RST_CTRL.SW_MAIN_POR. After these resets, the processor + * and internal bus structures may get into a state which is only + * recoverable with full device reset using MCU_PORz. + * Workaround(s): To avoid the lockup, a warm reset should be issued + * after a MAIN domain POR and before any access to the CPSW registers. + * The warm reset realigns internal clocks and prevents the lockup from + * happening. + */ + ret = uclass_first_device_err(UCLASS_SYSRESET, &dev); + if (ret) + printf("\n%s:uclass device error [%d]\n",__func__,ret); + + rst_src = readl(CTRLMMR_MCU_RST_SRC); + if (rst_src == COLD_BOOT || rst_src & (SW_POR_MCU | SW_POR_MAIN)) { + printf("Resetting on cold boot to workaround ErrataID:i2331\n"); + printf("Please resend tiboot3.bin in case of UART/DFU boot\n"); + do_reset(NULL, 0, 0, NULL); + } +#endif + /* Output System Firmware version info */ k3_sysfw_print_ver(); diff --git a/configs/am64x_evm_r5_defconfig b/configs/am64x_evm_r5_defconfig index b75cae6d803..bb705a1c3ce 100644 --- a/configs/am64x_evm_r5_defconfig +++ b/configs/am64x_evm_r5_defconfig @@ -169,3 +169,6 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0451 CONFIG_USB_GADGET_PRODUCT_NUM=0x6165 CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_FS_FAT_MAX_CLUSTSIZE=16384 +CONFIG_SYSRESET=y +CONFIG_SPL_SYSRESET=y +CONFIG_SYSRESET_TI_SCI=y |