diff options
| -rw-r--r-- | arch/arm/mach-mvebu/include/mach/cpu.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c | 17 | ||||
| -rw-r--r-- | arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h | 13 | ||||
| -rw-r--r-- | arch/arm/mach-mvebu/spl.c | 3 |
4 files changed, 35 insertions, 0 deletions
diff --git a/arch/arm/mach-mvebu/include/mach/cpu.h b/arch/arm/mach-mvebu/include/mach/cpu.h index 2e2d72aac89..fa7c81754b8 100644 --- a/arch/arm/mach-mvebu/include/mach/cpu.h +++ b/arch/arm/mach-mvebu/include/mach/cpu.h @@ -166,8 +166,10 @@ int ddr3_init(void); /* Auto Voltage Scaling */ #if defined(CONFIG_ARMADA_38X) || defined(CONFIG_ARMADA_39X) void mv_avs_init(void); +void mv_rtc_config(void); #else static inline void mv_avs_init(void) {} +static inline void mv_rtc_config(void) {} #endif /* diff --git a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c index e9dd096ad0f..3c4c7e01a1c 100644 --- a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c +++ b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c @@ -257,6 +257,23 @@ u8 sys_env_device_rev_get(void) return (value & (REVISON_ID_MASK)) >> REVISON_ID_OFFS; } +void mv_rtc_config(void) +{ + u32 i, val; + + if (!(IS_ENABLED(CONFIG_ARMADA_38X) || IS_ENABLED(CONFIG_ARMADA_39X))) + return; + + /* Activate pipe0 for read/write transaction, and set XBAR client number #1 */ + val = 0x1 << DFX_PIPE_SELECT_PIPE0_ACTIVE_OFFS | + 0x1 << DFX_PIPE_SELECT_XBAR_CLIENT_SEL_OFFS; + writel(val, MVEBU_DFX_BASE); + + /* Set new RTC value for all memory wrappers */ + for (i = 0; i < RTC_MEMORY_WRAPPER_COUNT; i++) + reg_write(RTC_MEMORY_WRAPPER_REG(i), RTC_MEMORY_WRAPPER_CTRL_VAL); +} + void mv_avs_init(void) { u32 sar_freq; diff --git a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h index 1774a5b780c..17cd811331d 100644 --- a/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h +++ b/arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h @@ -150,6 +150,19 @@ #define MPP_UART1_SET_MASK (~(0xff000)) #define MPP_UART1_SET_DATA (0x66000) +#define DFX_PIPE_SELECT_PIPE0_ACTIVE_OFFS 0 +/* DFX_PIPE_SELECT_XBAR_CLIENT_SEL_OFFS: Since address completion in 14bit + * address mode, and given that [14:8] => [19:13], the 2 lower bits [9:8] => + * [14:13] are dismissed. hence field offset is also shifted to 10 + */ +#define DFX_PIPE_SELECT_XBAR_CLIENT_SEL_OFFS 10 + +#define RTC_MEMORY_CTRL_REG_BASE 0xE6000 +#define RTC_MEMORY_WRAPPER_COUNT 8 +#define RTC_MEMORY_WRAPPER_REG(i) (RTC_MEMORY_CTRL_REG_BASE + ((i) * 0x40)) +#define RTC_MEMORY_CTRL_PDLVMC_FIELD_OFFS 6 +#define RTC_MEMORY_WRAPPER_CTRL_VAL (0x1 << RTC_MEMORY_CTRL_PDLVMC_FIELD_OFFS) + #define AVS_DEBUG_CNTR_REG 0xe4124 #define AVS_DEBUG_CNTR_DEFAULT_VALUE 0x08008073 diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c index a99bf166fd8..70fef3b573d 100644 --- a/arch/arm/mach-mvebu/spl.c +++ b/arch/arm/mach-mvebu/spl.c @@ -130,6 +130,9 @@ void board_init_f(ulong dummy) /* Initialize Auto Voltage Scaling */ mv_avs_init(); + /* Update read timing control for PCIe */ + mv_rtc_config(); + /* * Return to the BootROM to continue the Marvell xmodem * UART boot protocol. As initiated by the kwboot tool. |