diff options
Diffstat (limited to 'Bindings/firmware')
| -rw-r--r-- | Bindings/firmware/arm,scmi.yaml | 54 |
1 files changed, 52 insertions, 2 deletions
diff --git a/Bindings/firmware/arm,scmi.yaml b/Bindings/firmware/arm,scmi.yaml index 4591523b51a..7de2c29606e 100644 --- a/Bindings/firmware/arm,scmi.yaml +++ b/Bindings/firmware/arm,scmi.yaml @@ -247,6 +247,37 @@ properties: reg: const: 0x18 + protocol@19: + type: object + allOf: + - $ref: '#/$defs/protocol-node' + - $ref: /schemas/pinctrl/pinctrl.yaml + + unevaluatedProperties: false + + properties: + reg: + const: 0x19 + + patternProperties: + '-pins$': + type: object + allOf: + - $ref: /schemas/pinctrl/pincfg-node.yaml# + - $ref: /schemas/pinctrl/pinmux-node.yaml# + unevaluatedProperties: false + + description: + A pin multiplexing sub-node describes how to configure a + set of pins in some desired function. + A single sub-node may define several pin configurations. + This sub-node is using the default pinctrl bindings to configure + pin multiplexing and using SCMI protocol to apply a specified + configuration. + + required: + - reg + additionalProperties: false $defs: @@ -355,7 +386,7 @@ examples: scmi_dvfs: protocol@13 { reg = <0x13>; - #clock-cells = <1>; + #power-domain-cells = <1>; mboxes = <&mhuB 1 0>, <&mhuB 1 1>; @@ -401,6 +432,25 @@ examples: scmi_powercap: protocol@18 { reg = <0x18>; }; + + scmi_pinctrl: protocol@19 { + reg = <0x19>; + + i2c2-pins { + groups = "g_i2c2_a", "g_i2c2_b"; + function = "f_i2c2"; + }; + + mdio-pins { + groups = "g_avb_mdio"; + drive-strength = <24>; + }; + + keys_pins: keys-pins { + pins = "gpio_5_17", "gpio_5_20", "gpio_5_22", "gpio_2_1"; + bias-pull-up; + }; + }; }; }; @@ -468,7 +518,7 @@ examples: reg = <0x13>; linaro,optee-channel-id = <1>; shmem = <&cpu_optee_lpri0>; - #clock-cells = <1>; + #power-domain-cells = <1>; }; scmi_clk0: protocol@14 { |