diff options
Diffstat (limited to 'arch')
33 files changed, 3826 insertions, 676 deletions
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index e0c54bfa767..3d319663800 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -540,7 +540,8 @@ dtb-$(CONFIG_MX53) += imx53-cx9020.dtb \ dtb-$(CONFIG_MX6Q) += \ imx6-apalis.dtb \ imx6q-display5.dtb \ - imx6q-logicpd.dtb + imx6q-logicpd.dtb \ + imx6q-novena.dtb dtb-$(CONFIG_TARGET_TBS2910) += \ imx6q-tbs2910.dtb @@ -570,7 +571,8 @@ dtb-$(CONFIG_MX6SLL) += imx6sll-evk.dtb dtb-$(CONFIG_MX6SX) += \ imx6sx-sabreauto.dtb \ - imx6sx-sdb.dtb + imx6sx-sdb.dtb \ + imx6sx-softing-vining-2000.dtb dtb-$(CONFIG_MX6UL) += \ imx6ul-geam.dtb \ @@ -588,10 +590,13 @@ dtb-$(CONFIG_MX6UL) += \ dtb-$(CONFIG_MX6ULL) += \ imx6ull-14x14-evk.dtb \ imx6ull-colibri.dtb \ + imx6ull-phycore-segin.dtb \ imx6ull-dart-6ul.dtb dtb-$(CONFIG_ARCH_MX6) += \ - imx6-colibri.dtb + imx6-apalis.dtb \ + imx6-colibri.dtb \ + imx6q-dhcom-pdk2.dtb dtb-$(CONFIG_MX7) += imx7d-sdb.dtb \ imx7d-sdb-qspi.dtb \ @@ -605,8 +610,10 @@ dtb-$(CONFIG_MX7) += imx7d-sdb.dtb \ dtb-$(CONFIG_ARCH_MX7ULP) += imx7ulp-evk.dtb dtb-$(CONFIG_ARCH_IMX8) += \ - fsl-imx8qxp-mek.dtb \ + fsl-imx8qm-apalis.dtb \ fsl-imx8qm-mek.dtb \ + fsl-imx8qxp-colibri.dtb \ + fsl-imx8qxp-mek.dtb dtb-$(CONFIG_ARCH_IMX8M) += fsl-imx8mq-evk.dtb diff --git a/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi b/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi new file mode 100644 index 00000000000..7b1a9550e4c --- /dev/null +++ b/arch/arm/dts/fsl-imx8qm-apalis-u-boot.dtsi @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * Copyright 2019 Toradex AG + */ + +&mu { + u-boot,dm-spl; +}; + +&clk { + u-boot,dm-spl; +}; + +&iomuxc { + u-boot,dm-spl; +}; + +&pd_lsio { + u-boot,dm-spl; +}; + +&pd_lsio_gpio0 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio1 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio2 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio3 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio4 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio5 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio6 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio7 { + u-boot,dm-spl; +}; + +&pd_conn { + u-boot,dm-spl; +}; + +&pd_conn_sdch0 { + u-boot,dm-spl; +}; + +&pd_conn_sdch1 { + u-boot,dm-spl; +}; + +&pd_conn_sdch2 { + u-boot,dm-spl; +}; + +&gpio0 { + u-boot,dm-spl; +}; + +&gpio1 { + u-boot,dm-spl; +}; + +&gpio2 { + u-boot,dm-spl; +}; + +&gpio3 { + u-boot,dm-spl; +}; + +&gpio4 { + u-boot,dm-spl; +}; + +&gpio5 { + u-boot,dm-spl; +}; + +&gpio6 { + u-boot,dm-spl; +}; + +&gpio7 { + u-boot,dm-spl; +}; + +&lpuart0 { + u-boot,dm-spl; +}; + +&lpuart1 { + u-boot,dm-spl; +}; + +&lpuart2 { + u-boot,dm-spl; +}; + +&lpuart3 { + u-boot,dm-spl; +}; + +&usdhc1 { + u-boot,dm-spl; +}; + +&usdhc2 { + u-boot,dm-spl; +}; + +&usdhc3 { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/fsl-imx8qm-apalis.dts b/arch/arm/dts/fsl-imx8qm-apalis.dts new file mode 100644 index 00000000000..9b1f8aa32d0 --- /dev/null +++ b/arch/arm/dts/fsl-imx8qm-apalis.dts @@ -0,0 +1,615 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * Copyright 2017-2019 Toradex + */ + +/dts-v1/; + +/* First 128KB is for PSCI ATF. */ +/memreserve/ 0x80000000 0x00020000; + +#include "fsl-imx8qm.dtsi" +#include "fsl-imx8qm-apalis-u-boot.dtsi" + +/ { + model = "Toradex Apalis iMX8QM"; + compatible = "toradex,apalis-imx8qm", "fsl,imx8qm"; + + chosen { + bootargs = "console=ttyLP1,115200 earlycon=lpuart32,0x5a070000,115200"; + stdout-path = &lpuart1; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_cam1_gpios>, <&pinctrl_dap1_gpios>, + <&pinctrl_esai0_gpios>, <&pinctrl_fec2_gpios>, + <&pinctrl_gpio12>, <&pinctrl_gpio34>, <&pinctrl_gpio56>, + <&pinctrl_gpio7>, <&pinctrl_gpio8>, <&pinctrl_gpio_bkl_on>, + <&pinctrl_gpio_keys>, <&pinctrl_gpio_pwm0>, + <&pinctrl_gpio_pwm1>, <&pinctrl_gpio_pwm2>, + <&pinctrl_gpio_pwm3>, <&pinctrl_gpio_pwm_bkl>, + <&pinctrl_gpio_usbh_en>, <&pinctrl_gpio_usbh_oc_n>, + <&pinctrl_gpio_usbo1_en>, <&pinctrl_gpio_usbo1_oc_n>, + <&pinctrl_lpuart1ctrl>, <&pinctrl_lvds0_i2c0_gpio>, + <&pinctrl_lvds1_i2c0_gpios>, <&pinctrl_mipi_dsi_0_1_en>, + <&pinctrl_mipi_dsi1_gpios>, <&pinctrl_mlb_gpios>, + <&pinctrl_qspi1a_gpios>, <&pinctrl_sata1_act>, + <&pinctrl_sim0_gpios>, <&pinctrl_usdhc1_gpios>; + + apalis-imx8qm { + pinctrl_gpio12: gpio12grp { + fsl,pins = < + /* Apalis GPIO1 */ + SC_P_M40_GPIO0_00_LSIO_GPIO0_IO08 0x06000021 + /* Apalis GPIO2 */ + SC_P_M40_GPIO0_01_LSIO_GPIO0_IO09 0x06000021 + >; + }; + + pinctrl_gpio34: gpio34grp { + fsl,pins = < + /* Apalis GPIO3 */ + SC_P_M41_GPIO0_00_LSIO_GPIO0_IO12 0x06000021 + /* Apalis GPIO4 */ + SC_P_M41_GPIO0_01_LSIO_GPIO0_IO13 0x06000021 + >; + }; + + pinctrl_gpio56: gpio56grp { + fsl,pins = < + /* Apalis GPIO5 */ + SC_P_FLEXCAN2_RX_LSIO_GPIO4_IO01 0x06000021 + /* Apalis GPIO6 */ + SC_P_FLEXCAN2_TX_LSIO_GPIO4_IO02 0x06000021 + >; + }; + + pinctrl_gpio7: gpio7 { + fsl,pins = < + /* Apalis GPIO7 */ + SC_P_MLB_SIG_LSIO_GPIO3_IO26 0x00000021 + >; + }; + + pinctrl_gpio8: gpio8 { + fsl,pins = < + /* Apalis GPIO8 */ + SC_P_MLB_DATA_LSIO_GPIO3_IO28 0x00000021 + >; + }; + + pinctrl_gpio_keys: gpio-keys { + fsl,pins = < + /* Apalis WAKE1_MICO */ + SC_P_SPI3_CS0_LSIO_GPIO2_IO20 0x06000021 + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD 0x000014a0 /* Use pads in 3.3V mode */ + SC_P_ENET0_MDC_CONN_ENET0_MDC 0x06000020 + SC_P_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 + SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x06000020 + SC_P_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC 0x06000020 + SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x06000020 + SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x06000020 + SC_P_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2 0x06000020 + SC_P_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3 0x06000020 + SC_P_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC 0x06000020 + SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x06000020 + SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x06000020 + SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x06000020 + SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2 0x06000020 + SC_P_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020 + SC_P_ENET0_REFCLK_125M_25M_CONN_ENET0_REFCLK_125M_25M 0x06000020 + /* ETH_RESET# */ + SC_P_LVDS1_GPIO01_LSIO_GPIO1_IO11 0x06000020 + >; + }; + + pinctrl_gpio_bkl_on: gpio-bkl-on { + fsl,pins = < + /* Apalis BKL_ON */ + SC_P_LVDS0_GPIO00_LSIO_GPIO1_IO04 0x00000021 + >; + }; + + /* Apalis I2C2 (DDC) */ + pinctrl_lpi2c0: lpi2c0grp { + fsl,pins = < + SC_P_HDMI_TX0_TS_SCL_DMA_I2C0_SCL 0x04000022 + SC_P_HDMI_TX0_TS_SDA_DMA_I2C0_SDA 0x04000022 + >; + }; + + pinctrl_cam1_gpios: cam1gpiosgrp { + fsl,pins = < + /* Apalis CAM1_D7 */ + SC_P_MIPI_DSI1_I2C0_SCL_LSIO_GPIO1_IO20 0x00000021 + /* Apalis CAM1_D6 */ + SC_P_MIPI_DSI1_I2C0_SDA_LSIO_GPIO1_IO21 0x00000021 + /* Apalis CAM1_D5 */ + SC_P_ESAI0_TX0_LSIO_GPIO2_IO26 0x00000021 + /* Apalis CAM1_D4 */ + SC_P_ESAI0_TX1_LSIO_GPIO2_IO27 0x00000021 + /* Apalis CAM1_D3 */ + SC_P_ESAI0_TX2_RX3_LSIO_GPIO2_IO28 0x00000021 + /* Apalis CAM1_D2 */ + SC_P_ESAI0_TX3_RX2_LSIO_GPIO2_IO29 0x00000021 + /* Apalis CAM1_D1 */ + SC_P_ESAI0_TX4_RX1_LSIO_GPIO2_IO30 0x00000021 + /* Apalis CAM1_D0 */ + SC_P_ESAI0_TX5_RX0_LSIO_GPIO2_IO31 0x00000021 + /* Apalis CAM1_PCLK */ + SC_P_MCLK_IN0_LSIO_GPIO3_IO00 0x00000021 + /* Apalis CAM1_MCLK */ + SC_P_SPI3_SDO_LSIO_GPIO2_IO18 0x00000021 + /* Apalis CAM1_VSYNC */ + SC_P_ESAI0_SCKR_LSIO_GPIO2_IO24 0x00000021 + /* Apalis CAM1_HSYNC */ + SC_P_ESAI0_SCKT_LSIO_GPIO2_IO25 0x00000021 + >; + }; + + pinctrl_dap1_gpios: dap1gpiosgrp { + fsl,pins = < + /* Apalis DAP1_MCLK */ + SC_P_SPI3_SDI_LSIO_GPIO2_IO19 0x00000021 + /* Apalis DAP1_D_OUT */ + SC_P_SAI1_RXC_LSIO_GPIO3_IO12 0x00000021 + /* Apalis DAP1_RESET */ + SC_P_ESAI1_SCKT_LSIO_GPIO2_IO07 0x00000021 + /* Apalis DAP1_BIT_CLK */ + SC_P_SPI0_CS1_LSIO_GPIO3_IO06 0x00000021 + /* Apalis DAP1_D_IN */ + SC_P_SAI1_RXFS_LSIO_GPIO3_IO14 0x00000021 + /* Apalis DAP1_SYNC */ + SC_P_SPI2_CS1_LSIO_GPIO3_IO11 0x00000021 + /* Wi-Fi_I2S_EN# */ + SC_P_ESAI1_TX5_RX0_LSIO_GPIO2_IO13 0x00000021 + >; + }; + + pinctrl_esai0_gpios: esai0gpiosgrp { + fsl,pins = < + /* Apalis LCD1_G1 */ + SC_P_ESAI0_FSR_LSIO_GPIO2_IO22 0x00000021 + /* Apalis LCD1_G2 */ + SC_P_ESAI0_FST_LSIO_GPIO2_IO23 0x00000021 + >; + }; + + pinctrl_fec2_gpios: fec2gpiosgrp { + fsl,pins = < + SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETA_PAD 0x000014a0 + /* Apalis LCD1_R1 */ + SC_P_ENET1_MDC_LSIO_GPIO4_IO18 0x00000021 + /* Apalis LCD1_R0 */ + SC_P_ENET1_MDIO_LSIO_GPIO4_IO17 0x00000021 + /* Apalis LCD1_G0 */ + SC_P_ENET1_REFCLK_125M_25M_LSIO_GPIO4_IO16 0x00000021 + /* Apalis LCD1_R7 */ + SC_P_ENET1_RGMII_RX_CTL_LSIO_GPIO6_IO17 0x00000021 + /* Apalis LCD1_DE */ + SC_P_ENET1_RGMII_RXD0_LSIO_GPIO6_IO18 0x00000021 + /* Apalis LCD1_HSYNC */ + SC_P_ENET1_RGMII_RXD1_LSIO_GPIO6_IO19 0x00000021 + /* Apalis LCD1_VSYNC */ + SC_P_ENET1_RGMII_RXD2_LSIO_GPIO6_IO20 0x00000021 + /* Apalis LCD1_PCLK */ + SC_P_ENET1_RGMII_RXD3_LSIO_GPIO6_IO21 0x00000021 + /* Apalis LCD1_R6 */ + SC_P_ENET1_RGMII_TX_CTL_LSIO_GPIO6_IO11 0x00000021 + /* Apalis LCD1_R5 */ + SC_P_ENET1_RGMII_TXC_LSIO_GPIO6_IO10 0x00000021 + /* Apalis LCD1_R4 */ + SC_P_ENET1_RGMII_TXD0_LSIO_GPIO6_IO12 0x00000021 + /* Apalis LCD1_R3 */ + SC_P_ENET1_RGMII_TXD1_LSIO_GPIO6_IO13 0x00000021 + /* Apalis LCD1_R2 */ + SC_P_ENET1_RGMII_TXD2_LSIO_GPIO6_IO14 0x00000021 + >; + }; + + pinctrl_lvds0_i2c0_gpio: lvds0i2c0gpio { + fsl,pins = < + /* Apalis TS_2 */ + SC_P_LVDS0_I2C0_SCL_LSIO_GPIO1_IO06 0x00000021 + >; + }; + + pinctrl_lvds1_i2c0_gpios: lvds1i2c0gpiosgrp { + fsl,pins = < + /* Apalis LCD1_G6 */ + SC_P_LVDS1_I2C0_SCL_LSIO_GPIO1_IO12 0x00000021 + /* Apalis LCD1_G7 */ + SC_P_LVDS1_I2C0_SDA_LSIO_GPIO1_IO13 0x00000021 + >; + }; + + pinctrl_mipi_dsi1_gpios: mipidsi1gpiosgrp { + fsl,pins = < + /* Apalis TS_4 */ + SC_P_MIPI_DSI1_GPIO0_00_LSIO_GPIO1_IO22 0x00000021 + >; + }; + + pinctrl_mlb_gpios: mlbgpiosgrp { + fsl,pins = < + /* Apalis TS_1 */ + SC_P_MLB_CLK_LSIO_GPIO3_IO27 0x00000021 + >; + }; + + pinctrl_qspi1a_gpios: qspi1agpiosgrp { + fsl,pins = < + /* Apalis LCD1_B0 */ + SC_P_QSPI1A_DATA0_LSIO_GPIO4_IO26 0x00000021 + /* Apalis LCD1_B1 */ + SC_P_QSPI1A_DATA1_LSIO_GPIO4_IO25 0x00000021 + /* Apalis LCD1_B2 */ + SC_P_QSPI1A_DATA2_LSIO_GPIO4_IO24 0x00000021 + /* Apalis LCD1_B3 */ + SC_P_QSPI1A_DATA3_LSIO_GPIO4_IO23 0x00000021 + /* Apalis LCD1_B5 */ + SC_P_QSPI1A_DQS_LSIO_GPIO4_IO22 0x00000021 + /* Apalis LCD1_B7 */ + SC_P_QSPI1A_SCLK_LSIO_GPIO4_IO21 0x00000021 + /* Apalis LCD1_B4 */ + SC_P_QSPI1A_SS0_B_LSIO_GPIO4_IO19 0x00000021 + /* Apalis LCD1_B6 */ + SC_P_QSPI1A_SS1_B_LSIO_GPIO4_IO20 0x00000021 + >; + }; + + pinctrl_sim0_gpios: sim0gpiosgrp { + fsl,pins = < + /* Apalis LCD1_G5 */ + SC_P_SIM0_CLK_LSIO_GPIO0_IO00 0x00000021 + /* Apalis LCD1_G3 */ + SC_P_SIM0_GPIO0_00_LSIO_GPIO0_IO05 0x00000021 + /* Apalis TS_5 */ + SC_P_SIM0_IO_LSIO_GPIO0_IO02 0x00000021 + /* Apalis LCD1_G4 */ + SC_P_SIM0_RST_LSIO_GPIO0_IO01 0x00000021 + >; + }; + + pinctrl_usdhc1_gpios: usdhc1gpiosgrp { + fsl,pins = < + /* Apalis TS_6 */ + SC_P_USDHC1_STROBE_LSIO_GPIO5_IO23 0x00000021 + >; + }; + + pinctrl_mipi_dsi_0_1_en: mipi_dsi_0_1_en { + fsl,pins = < + /* Apalis TS_3 */ + SC_P_LVDS0_I2C0_SDA_LSIO_GPIO1_IO07 0x00000021 + >; + }; + + /* On-module I2C */ + pinctrl_lpi2c1: lpi2c1grp { + fsl,pins = < + SC_P_GPT0_CLK_DMA_I2C1_SCL 0x04000020 + SC_P_GPT0_CAPTURE_DMA_I2C1_SDA 0x04000020 + >; + }; + + /* Apalis I2C1 */ + pinctrl_lpi2c2: lpi2c2grp { + fsl,pins = < + SC_P_GPT1_CLK_DMA_I2C2_SCL 0x04000020 + SC_P_GPT1_CAPTURE_DMA_I2C2_SDA 0x04000020 + >; + }; + + /* Apalis I2C3 (CAM) */ + pinctrl_lpi2c3: lpi2c3grp { + fsl,pins = < + SC_P_SIM0_PD_DMA_I2C3_SCL 0x04000020 + SC_P_SIM0_POWER_EN_DMA_I2C3_SDA 0x04000020 + >; + }; + + /* Apalis UART3 */ + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + SC_P_UART0_RX_DMA_UART0_RX 0x06000020 + SC_P_UART0_TX_DMA_UART0_TX 0x06000020 + >; + }; + + /* Apalis UART1 */ + pinctrl_lpuart1: lpuart1grp { + fsl,pins = < + SC_P_UART1_RX_DMA_UART1_RX 0x06000020 + SC_P_UART1_TX_DMA_UART1_TX 0x06000020 + SC_P_UART1_CTS_B_DMA_UART1_CTS_B 0x06000020 + SC_P_UART1_RTS_B_DMA_UART1_RTS_B 0x06000020 + >; + }; + + pinctrl_lpuart1ctrl: lpuart1ctrlgrp { + fsl,pins = < + /* Apalis UART1_DTR */ + SC_P_M40_I2C0_SCL_LSIO_GPIO0_IO06 0x00000021 + /* Apalis UART1_DSR */ + SC_P_M40_I2C0_SDA_LSIO_GPIO0_IO07 0x00000021 + /* Apalis UART1_DCD */ + SC_P_M41_I2C0_SCL_LSIO_GPIO0_IO10 0x00000021 + /* Apalis UART1_RI */ + SC_P_M41_I2C0_SDA_LSIO_GPIO0_IO11 0x00000021 + >; + }; + + /* Apalis UART4 */ + pinctrl_lpuart2: lpuart2grp { + fsl,pins = < + SC_P_LVDS0_I2C1_SCL_DMA_UART2_TX 0x06000020 + SC_P_LVDS0_I2C1_SDA_DMA_UART2_RX 0x06000020 + >; + }; + + /* Apalis UART2 */ + pinctrl_lpuart3: lpuart3grp { + fsl,pins = < + SC_P_LVDS1_I2C1_SCL_DMA_UART3_TX 0x06000020 + SC_P_LVDS1_I2C1_SDA_DMA_UART3_RX 0x06000020 + SC_P_ENET1_RGMII_TXD3_DMA_UART3_RTS_B 0x06000020 + SC_P_ENET1_RGMII_RXC_DMA_UART3_CTS_B 0x06000020 + >; + }; + + /* Apalis PWM3 */ + pinctrl_gpio_pwm0: gpiopwm0grp { + fsl,pins = < + SC_P_UART0_RTS_B_LSIO_GPIO0_IO22 0x00000021 + >; + }; + + /* Apalis PWM4 */ + pinctrl_gpio_pwm1: gpiopwm1grp { + fsl,pins = < + SC_P_UART0_CTS_B_LSIO_GPIO0_IO23 0x00000021 + >; + }; + + /* Apalis PWM1 */ + pinctrl_gpio_pwm2: gpiopwm2grp { + fsl,pins = < + SC_P_GPT1_COMPARE_LSIO_GPIO0_IO19 0x00000021 + >; + }; + + /* Apalis PWM2 */ + pinctrl_gpio_pwm3: gpiopwm3grp { + fsl,pins = < + SC_P_GPT0_COMPARE_LSIO_GPIO0_IO16 0x00000021 + >; + }; + + /* Apalis BKL1_PWM */ + pinctrl_gpio_pwm_bkl: gpiopwmbklgrp { + fsl,pins = < + SC_P_LVDS1_GPIO00_LVDS1_GPIO0_IO00 0x00000021 + >; + }; + + /* Apalis USBH_EN */ + pinctrl_gpio_usbh_en: gpiousbhen { + fsl,pins = < + SC_P_USB_SS3_TC1_LSIO_GPIO4_IO04 0x06000060 + >; + }; + + /* Apalis USBH_OC# */ + pinctrl_gpio_usbh_oc_n: gpiousbhocn { + fsl,pins = < + SC_P_USB_SS3_TC3_LSIO_GPIO4_IO06 0x06000060 + >; + }; + + /* Apalis USBO1_EN */ + pinctrl_gpio_usbo1_en: gpiousbo1en { + fsl,pins = < + SC_P_USB_SS3_TC0_LSIO_GPIO4_IO03 0x06000060 + >; + }; + + /* Apalis USBO1_OC# */ + pinctrl_gpio_usbo1_oc_n: gpiousbo1ocn { + fsl,pins = < + SC_P_USB_SS3_TC2_LSIO_GPIO4_IO05 0x06000060 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x06000041 + SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000021 + >; + }; + + pinctrl_sata1_act: sata1actgrp { + fsl,pins = < + /* Apalis SATA1_ACT# */ + SC_P_ESAI1_TX0_LSIO_GPIO2_IO08 0x00000021 + >; + }; + + pinctrl_mmc1_cd: mmc1cdgrp { + fsl,pins = < + /* Apalis MMC1_CD# */ + SC_P_ESAI1_TX1_LSIO_GPIO2_IO09 0x00000021 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 + SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 + SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 + SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 + SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 + SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 + SC_P_USDHC1_DATA4_CONN_USDHC1_DATA4 0x00000021 + SC_P_USDHC1_DATA5_CONN_USDHC1_DATA5 0x00000021 + SC_P_USDHC1_DATA6_CONN_USDHC1_DATA6 0x00000021 + SC_P_USDHC1_DATA7_CONN_USDHC1_DATA7 0x00000021 + /* On-module PMIC use */ + SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 + >; + }; + + pinctrl_sd1_cd: sd1cdgrp { + fsl,pins = < + /* Apalis SD1_CD# */ + SC_P_USDHC2_CD_B_LSIO_GPIO4_IO12 0x00000021 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + SC_P_USDHC2_CLK_CONN_USDHC2_CLK 0x06000041 + SC_P_USDHC2_CMD_CONN_USDHC2_CMD 0x00000021 + SC_P_USDHC2_DATA0_CONN_USDHC2_DATA0 0x00000021 + SC_P_USDHC2_DATA1_CONN_USDHC2_DATA1 0x00000021 + SC_P_USDHC2_DATA2_CONN_USDHC2_DATA2 0x00000021 + SC_P_USDHC2_DATA3_CONN_USDHC2_DATA3 0x00000021 + /* On-module PMIC use */ + SC_P_USDHC2_VSELECT_CONN_USDHC2_VSELECT 0x00000021 + >; + }; + }; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + fsl,magic-packet; + phy-handle = <ðphy0>; + phy-mode = "rgmii"; + phy-reset-duration = <10>; + phy-reset-gpios = <&gpio1 11 1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@7 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <7>; + }; + }; +}; + +/* Apalis I2C2 (DDC) */ +&i2c0 { + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c0>; + clock-frequency = <100000>; + status = "okay"; +}; + +/* On-module I2C */ +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c1>; + status = "okay"; +}; + +/* Apalis I2C1 */ +&i2c2 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c2>; + status = "okay"; +}; + +/* Apalis I2C3 (CAM) */ +&i2c3 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c3>; + status = "okay"; +}; + +/* Apalis UART3 */ +&lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; + status = "okay"; +}; + +/* Apalis UART1 */ +&lpuart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; + status = "okay"; +}; + +/* Apalis UART4 */ +&lpuart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart2>; + status = "okay"; +}; + +/* Apalis UART2 */ +&lpuart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart3>; + status = "okay"; +}; + +/* eMMC */ +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +/* Apalis MMC1 */ +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_mmc1_cd>; + bus-width = <8>; + cd-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>; /* Apalis MMC1_CD# */ + status = "okay"; +}; + +/* Apalis SD1 */ +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_sd1_cd>; + bus-width = <4>; + cd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; /* Apalis SD1_CD# */ + status = "okay"; +}; diff --git a/arch/arm/dts/fsl-imx8qm.dtsi b/arch/arm/dts/fsl-imx8qm.dtsi index b39c40bd98b..af060db3a12 100644 --- a/arch/arm/dts/fsl-imx8qm.dtsi +++ b/arch/arm/dts/fsl-imx8qm.dtsi @@ -22,9 +22,18 @@ ethernet0 = &fec1; ethernet1 = &fec2; serial0 = &lpuart0; + serial1 = &lpuart1; + serial2 = &lpuart2; + serial3 = &lpuart3; + serial4 = &lpuart4; mmc0 = &usdhc1; mmc1 = &usdhc2; mmc2 = &usdhc3; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; }; memory@80000000 { @@ -193,9 +202,103 @@ power-domains = <&pd_dma>; wakeup-irq = <345>; }; + pd_dma_lpuart1: PD_DMA_UART1 { + reg = <SC_R_UART_1>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + wakeup-irq = <346>; + }; + pd_dma_lpuart2: PD_DMA_UART2 { + reg = <SC_R_UART_2>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + wakeup-irq = <347>; + }; + pd_dma_lpuart3: PD_DMA_UART3 { + reg = <SC_R_UART_3>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + wakeup-irq = <348>; + }; + pd_dma_lpuart4: PD_DMA_UART4 { + reg = <SC_R_UART_4>; + #power-domain-cells = <0>; + power-domains = <&pd_dma>; + wakeup-irq = <349>; + }; }; }; + i2c0: i2c@5a800000 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x0 0x5a800000 0x0 0x4000>; + interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&clk IMX8QM_I2C0_CLK>, + <&clk IMX8QM_I2C0_IPG_CLK>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX8QM_I2C0_CLK>; + assigned-clock-rates = <24000000>; + power-domains = <&pd_dma_lpi2c0>; + status = "disabled"; + }; + + i2c1: i2c@5a810000 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x0 0x5a810000 0x0 0x4000>; + interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&clk IMX8QM_I2C1_CLK>, + <&clk IMX8QM_I2C1_IPG_CLK>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX8QM_I2C1_CLK>; + assigned-clock-rates = <24000000>; + power-domains = <&pd_dma_lpi2c1>; + status = "disabled"; + }; + + i2c2: i2c@5a820000 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x0 0x5a820000 0x0 0x4000>; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&clk IMX8QM_I2C2_CLK>, + <&clk IMX8QM_I2C2_IPG_CLK>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX8QM_I2C2_CLK>; + assigned-clock-rates = <24000000>; + power-domains = <&pd_dma_lpi2c2>; + status = "disabled"; + }; + + i2c3: i2c@5a830000 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x0 0x5a830000 0x0 0x4000>; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&clk IMX8QM_I2C3_CLK>, + <&clk IMX8QM_I2C3_IPG_CLK>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX8QM_I2C3_CLK>; + assigned-clock-rates = <24000000>; + power-domains = <&pd_dma_lpi2c3>; + status = "disabled"; + }; + + i2c4: i2c@5a840000 { + compatible = "fsl,imx8qm-lpi2c", "fsl,imx7ulp-lpi2c"; + reg = <0x0 0x5a840000 0x0 0x4000>; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + clocks = <&clk IMX8QM_I2C4_CLK>, + <&clk IMX8QM_I2C4_IPG_CLK>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX8QM_I2C4_CLK>; + assigned-clock-rates = <24000000>; + power-domains = <&pd_dma_lpi2c4>; + status = "disabled"; + }; + gpio0: gpio@5d080000 { compatible = "fsl,imx8qm-gpio", "fsl,imx35-gpio"; reg = <0x0 0x5d080000 0x0 0x10000>; @@ -297,6 +400,58 @@ status = "disabled"; }; + lpuart1: serial@5a070000 { + compatible = "fsl,imx8qm-lpuart"; + reg = <0x0 0x5a070000 0x0 0x1000>; + interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8QM_UART1_CLK>, + <&clk IMX8QM_UART1_IPG_CLK>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX8QM_UART1_CLK>; + assigned-clock-rates = <80000000>; + power-domains = <&pd_dma_lpuart1>; + status = "disabled"; + }; + + lpuart2: serial@5a080000 { + compatible = "fsl,imx8qm-lpuart"; + reg = <0x0 0x5a080000 0x0 0x1000>; + interrupts = <GIC_SPI 347 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8QM_UART2_CLK>, + <&clk IMX8QM_UART2_IPG_CLK>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX8QM_UART2_CLK>; + assigned-clock-rates = <80000000>; + power-domains = <&pd_dma_lpuart2>; + status = "disabled"; + }; + + lpuart3: serial@5a090000 { + compatible = "fsl,imx8qm-lpuart"; + reg = <0x0 0x5a090000 0x0 0x1000>; + interrupts = <GIC_SPI 348 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8QM_UART3_CLK>, + <&clk IMX8QM_UART3_IPG_CLK>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX8QM_UART3_CLK>; + assigned-clock-rates = <80000000>; + power-domains = <&pd_dma_lpuart3>; + status = "disabled"; + }; + + lpuart4: serial@5a0a0000 { + compatible = "fsl,imx8qm-lpuart"; + reg = <0x0 0x5a0a0000 0x0 0x1000>; + interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8QM_UART4_CLK>, + <&clk IMX8QM_UART4_IPG_CLK>; + clock-names = "per", "ipg"; + assigned-clocks = <&clk IMX8QM_UART4_CLK>; + assigned-clock-rates = <80000000>; + power-domains = <&pd_dma_lpuart4>; + status = "disabled"; + }; + usdhc1: usdhc@5b010000 { compatible = "fsl,imx8qm-usdhc", "fsl,imx6sl-usdhc"; interrupt-parent = <&gic>; diff --git a/arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi b/arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi new file mode 100644 index 00000000000..5b061f94ba6 --- /dev/null +++ b/arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * Copyright 2019 Toradex AG + */ + +&{/imx8qx-pm} { + + u-boot,dm-spl; +}; + +&mu { + u-boot,dm-spl; +}; + +&clk { + u-boot,dm-spl; +}; + +&iomuxc { + u-boot,dm-spl; +}; + +&pd_lsio { + u-boot,dm-spl; +}; + +&pd_lsio_gpio0 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio1 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio2 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio3 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio4 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio5 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio6 { + u-boot,dm-spl; +}; + +&pd_lsio_gpio7 { + u-boot,dm-spl; +}; + +&pd_conn { + u-boot,dm-spl; +}; + +&pd_conn_sdch0 { + u-boot,dm-spl; +}; + +&pd_conn_sdch1 { + u-boot,dm-spl; +}; + +&pd_conn_sdch2 { + u-boot,dm-spl; +}; + +&gpio0 { + u-boot,dm-spl; +}; + +&gpio1 { + u-boot,dm-spl; +}; + +&gpio2 { + u-boot,dm-spl; +}; + +&gpio3 { + u-boot,dm-spl; +}; + +&gpio4 { + u-boot,dm-spl; +}; + +&gpio5 { + u-boot,dm-spl; +}; + +&gpio6 { + u-boot,dm-spl; +}; + +&gpio7 { + u-boot,dm-spl; +}; + +&lpuart3 { + u-boot,dm-spl; +}; + +&usdhc1 { + u-boot,dm-spl; +}; + +&usdhc2 { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/fsl-imx8qxp-colibri.dts b/arch/arm/dts/fsl-imx8qxp-colibri.dts new file mode 100644 index 00000000000..0c20edf2cf3 --- /dev/null +++ b/arch/arm/dts/fsl-imx8qxp-colibri.dts @@ -0,0 +1,328 @@ +// SPDX-License-Identifier: GPL-2.0+ OR X11 +/* + * Copyright 2019 Toradex AG + */ + +/dts-v1/; + +#include "fsl-imx8qxp.dtsi" +#include "fsl-imx8qxp-colibri-u-boot.dtsi" + +/ { + model = "Toradex Colibri iMX8QXP"; + compatible = "toradex,colibri-imx8qxp", "fsl,imx8qxp"; + + chosen { + bootargs = "console=ttyLP3,115200 earlycon=lpuart32,0x5a090000,115200"; + stdout-path = &lpuart3; + }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_reg>; + regulator-name = "usbh_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 3 GPIO_ACTIVE_LOW>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog0>, <&pinctrl_hog1>, <&pinctrl_hog2>; + + colibri-imx8qxp { + pinctrl_lpuart0: lpuart0grp { + fsl,pins = < + SC_P_UART0_RX_ADMA_UART0_RX 0x06000020 + SC_P_UART0_TX_ADMA_UART0_TX 0x06000020 + >; + }; + + pinctrl_lpuart3: lpuart3grp { + fsl,pins = < + SC_P_FLEXCAN2_RX_ADMA_UART3_RX 0x06000020 + SC_P_FLEXCAN2_TX_ADMA_UART3_TX 0x06000020 + >; + }; + + pinctrl_lpuart3_ctrl: lpuart3ctrlgrp { + fsl,pins = < + SC_P_MIPI_DSI1_GPIO0_01_LSIO_GPIO2_IO00 0x00000020 /* DTR */ + SC_P_SAI1_RXD_LSIO_GPIO0_IO29 0x00000020 /* CTS */ + SC_P_SAI1_RXC_LSIO_GPIO0_IO30 0x00000020 /* RTS */ + SC_P_CSI_RESET_LSIO_GPIO3_IO03 0x00000020 /* DSR */ + SC_P_USDHC1_CD_B_LSIO_GPIO4_IO22 0x00000020 /* DCD */ + SC_P_CSI_EN_LSIO_GPIO3_IO02 0x00000020 /* RI */ + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB0_PAD 0x000014a0 /* Use pads in 3.3V mode */ + SC_P_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB1_PAD 0x000014a0 /* Use pads in 3.3V mode */ + SC_P_ENET0_MDC_CONN_ENET0_MDC 0x06000020 + SC_P_ENET0_MDIO_CONN_ENET0_MDIO 0x06000020 + SC_P_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL 0x00000061 + SC_P_ENET0_RGMII_TXC_CONN_ENET0_RCLK50M_OUT 0x06000061 + SC_P_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0 0x00000061 + SC_P_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1 0x00000061 + SC_P_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL 0x00000061 + SC_P_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0 0x00000061 + SC_P_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1 0x00000061 + SC_P_ENET0_RGMII_RXD2_CONN_ENET0_RMII_RX_ER 0x00000061 + >; + }; + + pinctrl_gpio_bl_on: gpio-bl-on { + fsl,pins = < + SC_P_QSPI0A_DATA3_LSIO_GPIO3_IO12 0x00000040 + >; + }; + + pinctrl_hog0: hog0grp { + fsl,pins = < + SC_P_COMP_CTL_GPIO_1V8_3V3_GPIORHB_PAD 0x000514a0 /* Use pads in 3.3V mode */ + >; + }; + + pinctrl_hog1: hog1grp { + fsl,pins = < + SC_P_QSPI0A_DATA1_LSIO_GPIO3_IO10 0x00000020 /* 45 */ + SC_P_ENET0_RGMII_TXD3_LSIO_GPIO5_IO02 0x06000020 /* 65 */ + SC_P_CSI_D07_CI_PI_D09 0x00000061 + SC_P_QSPI0A_DATA2_LSIO_GPIO3_IO11 0x00000020 /* 69 */ + SC_P_QSPI0A_DQS_LSIO_GPIO3_IO13 0x00000020 /* 73 */ + SC_P_SAI0_TXC_LSIO_GPIO0_IO26 0x00000020 /* 79 */ + SC_P_CSI_D02_CI_PI_D04 0x00000061 + SC_P_ENET0_RGMII_RXC_LSIO_GPIO5_IO03 0x06000020 /* 85 */ + SC_P_CSI_D06_CI_PI_D08 0x00000061 + SC_P_QSPI0B_SCLK_LSIO_GPIO3_IO17 0x00000020 /* 95 */ + SC_P_SAI0_RXD_LSIO_GPIO0_IO27 0x00000020 /* 97 */ + SC_P_CSI_D03_CI_PI_D05 0x00000061 + SC_P_QSPI0B_DATA0_LSIO_GPIO3_IO18 0x00000020 /* 99 */ + SC_P_SAI0_TXFS_LSIO_GPIO0_IO28 0x00000020 /* 101 */ + SC_P_CSI_D00_CI_PI_D02 0x00000061 + SC_P_SAI0_TXD_LSIO_GPIO0_IO25 0x00000020 /* 103 */ + SC_P_CSI_D01_CI_PI_D03 0x00000061 + SC_P_QSPI0B_DATA1_LSIO_GPIO3_IO19 0x00000020 /* 105 */ + SC_P_QSPI0B_DATA2_LSIO_GPIO3_IO20 0x00000020 /* 107 */ + SC_P_USB_SS3_TC2_LSIO_GPIO4_IO05 0x00000020 /* 127 */ + SC_P_USB_SS3_TC3_LSIO_GPIO4_IO06 0x00000020 /* 131 */ + SC_P_USB_SS3_TC1_LSIO_GPIO4_IO04 0x00000020 /* 133 */ + SC_P_CSI_PCLK_LSIO_GPIO3_IO00 0x00000020 /* 96 */ + SC_P_QSPI0B_DATA3_LSIO_GPIO3_IO21 0x00000020 /* 98 */ + SC_P_SAI1_RXFS_LSIO_GPIO0_IO31 0x00000020 /* 100 */ + SC_P_QSPI0B_DQS_LSIO_GPIO3_IO22 0x00000020 /* 102 */ + SC_P_QSPI0B_SS0_B_LSIO_GPIO3_IO23 0x00000020 /* 104 */ + SC_P_QSPI0B_SS1_B_LSIO_GPIO3_IO24 0x00000020 /* 106 */ + >; + }; + + pinctrl_hog2: hog2grp { + fsl,pins = < + SC_P_CSI_MCLK_LSIO_GPIO3_IO01 0x00000020 /* 75 */ + SC_P_QSPI0A_SS0_B_LSIO_GPIO3_IO14 0x00000020 /* 77 */ + SC_P_QSPI0A_SS1_B_LSIO_GPIO3_IO15 0x00000020 /* 89 */ + SC_P_QSPI0A_SCLK_LSIO_GPIO3_IO16 0x00000020 /* 93 */ + >; + }; + + /* Off Module I2C */ + pinctrl_i2c1: i2c1grp { + fsl,pins = < + SC_P_MIPI_DSI0_GPIO0_00_ADMA_I2C1_SCL 0x06000021 + SC_P_MIPI_DSI0_GPIO0_01_ADMA_I2C1_SDA 0x06000021 + >; + }; + + /*INT*/ + pinctrl_usb3503a: usb3503a-grp { + fsl,pins = < + SC_P_MIPI_CSI0_MCLK_OUT_LSIO_GPIO3_IO04 0x00000061 + >; + }; + + pinctrl_usbc_det: usbc-det { + fsl,pins = < + SC_P_ENET0_REFCLK_125M_25M_LSIO_GPIO5_IO09 0x06000040 + >; + }; + + pinctrl_usbh1_reg: usbh1-reg { + fsl,pins = < + SC_P_USB_SS3_TC0_LSIO_GPIO4_IO03 0x06000040 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 + SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000021 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1grp100mhz { + fsl,pins = < + SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 + SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000021 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1grp200mhz { + fsl,pins = < + SC_P_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041 + SC_P_EMMC0_CMD_CONN_EMMC0_CMD 0x00000021 + SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0 0x00000021 + SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1 0x00000021 + SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2 0x00000021 + SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3 0x00000021 + SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4 0x00000021 + SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5 0x00000021 + SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6 0x00000021 + SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7 0x00000021 + SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE 0x00000041 + SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B 0x00000021 + >; + }; + + pinctrl_usdhc2_gpio: usdhc2gpiogrp { + fsl,pins = < + SC_P_QSPI0A_DATA0_LSIO_GPIO3_IO09 0x06000021 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 + SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 + SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 + SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 + SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 + SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 + SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp100mhz { + fsl,pins = < + SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 + SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 + SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 + SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 + SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 + SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 + SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp200mhz { + fsl,pins = < + SC_P_USDHC1_CLK_CONN_USDHC1_CLK 0x06000041 + SC_P_USDHC1_CMD_CONN_USDHC1_CMD 0x00000021 + SC_P_USDHC1_DATA0_CONN_USDHC1_DATA0 0x00000021 + SC_P_USDHC1_DATA1_CONN_USDHC1_DATA1 0x00000021 + SC_P_USDHC1_DATA2_CONN_USDHC1_DATA2 0x00000021 + SC_P_USDHC1_DATA3_CONN_USDHC1_DATA3 0x00000021 + SC_P_USDHC1_VSELECT_CONN_USDHC1_VSELECT 0x00000021 + >; + }; + }; +}; + +&lpuart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart0>; + status = "okay"; +}; + +&lpuart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart3>, <&pinctrl_lpuart3_ctrl>; + status = "okay"; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&gpio4 { + status = "okay"; +}; + +&fec1 { + phy-handle = <ðphy0>; + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@2 { + compatible = "ethernet-phy-ieee802.3-c22"; + max-speed = <100>; + reg = <2>; + }; + }; +}; + +&i2c1 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&usdhc1 { + bus-width = <8>; + non-removable; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + status = "okay"; +}; + +&usdhc2 { + bus-width = <4>; + cd-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; + status = "okay"; +}; diff --git a/arch/arm/dts/imx6q-dhcom-pdk2.dts b/arch/arm/dts/imx6q-dhcom-pdk2.dts new file mode 100644 index 00000000000..9c61e3be2d9 --- /dev/null +++ b/arch/arm/dts/imx6q-dhcom-pdk2.dts @@ -0,0 +1,151 @@ +// SPDX-License-Identifier: (GPL-2.0+) +/* + * Copyright (C) 2015 DH electronics GmbH + * Copyright (C) 2018 Marek Vasut <marex@denx.de> + */ + +/dts-v1/; + +#include "imx6q-dhcom-som.dtsi" + +/ { + model = "Freescale i.MX6 Quad DHCOM Premium Developer Kit (2)"; + compatible = "dh,imx6q-dhcom-pdk2", "dh,imx6q-dhcom-som", "fsl,imx6q"; + + chosen { + stdout-path = &uart1; + }; + + clk_ext_audio_codec: clock-codec { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_ext>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c2 { + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + clocks = <&clk_ext_audio_codec>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_base &pinctrl_hog>; + + pinctrl_hog: hog-grp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x400120b0 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x400120b0 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x400120b0 + MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x400120b0 + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x120b0 + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x400120b0 + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x120b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x120b0 + MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x400120b0 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x400120b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x400120b0 + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x400120b0 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x400120b0 + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x400120b0 + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x400120b0 + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x400120b0 + MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x400120b0 + MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x400120b0 + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x400120b0 + MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x400120b0 + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x400120b0 + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x400120b0 + MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x400120b0 + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x400120b0 + >; + }; + + pinctrl_audmux_ext: audmux-ext-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_enet_1G: enet-1G-grp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x000b0 + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x000b1 + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x000b1 + >; + }; + + pinctrl_pcie: pcie-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b1 + >; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio6 14 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&usdhc3 { + status = "okay"; +}; diff --git a/arch/arm/dts/imx6q-dhcom-som.dtsi b/arch/arm/dts/imx6q-dhcom-som.dtsi new file mode 100644 index 00000000000..524cd287c65 --- /dev/null +++ b/arch/arm/dts/imx6q-dhcom-som.dtsi @@ -0,0 +1,477 @@ +// SPDX-License-Identifier: (GPL-2.0+) +/* + * Copyright (C) 2015 DH electronics GmbH + * Copyright (C) 2018 Marek Vasut <marex@denx.de> + */ + +#include "imx6q.dtsi" +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/imx6qdl-clock.h> +#include <dt-bindings/input/input.h> + +/ { + aliases { + mmc0 = &usdhc2; + mmc1 = &usdhc3; + mmc2 = &usdhc4; + mmc3 = &usdhc1; + }; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_3p3v: regulator-3P3V { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>, <&gpio4 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash@0 { /* S25FL116K */ + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + m25p,fast-read; + }; +}; + +&ecspi2 { + cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_100M>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { /* SMSC LAN8710Ai */ + reg = <0>; + max-speed = <100>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + reset-delay-us = <1000>; + reset-post-delay-us = <1000>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic_hw300>; + reg = <0x3c>; + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <787500>; + regulator-max-microvolt = <1527272>; + lltc,fb-voltage-divider = <100000 110000>; + regulator-suspend-mem-microvolt = <1040000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1885714>; + regulator-max-microvolt = <3657142>; + lltc,fb-voltage-divider = <100000 28000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <787500>; + regulator-max-microvolt = <1527272>; + lltc,fb-voltage-divider = <100000 110000>; + regulator-suspend-mem-microvolt = <980000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <855571>; + regulator-max-microvolt = <1659291>; + lltc,fb-voltage-divider = <100000 93100>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-min-microvolt = <3240306>; + regulator-max-microvolt = <3240306>; + lltc,fb-voltage-divider = <102000 29400>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-min-microvolt = <2484708>; + regulator-max-microvolt = <2484708>; + lltc,fb-voltage-divider = <100000 41200>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + touchscreen@49 { /* TSC2004 */ + compatible = "ti,tsc2004"; + reg = <0x49>; + vio-supply = <®_3p3v>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc2004_hw300>; + interrupts-extended = <&gpio4 14 IRQ_TYPE_EDGE_FALLING>; + status = "disabled"; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + rtc@56 { + compatible = "rv3029c2"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc_hw300>; + reg = <0x56>; + interrupt-parent = <&gpio7>; + interrupts = <12 2>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_base>; + + pinctrl_hog_base: hog-base-grp { + fsl,pins = < + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x120b0 + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x120b0 + MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x120b0 + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x120b0 + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x120b0 + >; + }; + + pinctrl_ecspi1: ecspi1-grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + >; + }; + + pinctrl_ecspi2: ecspi2-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x1b0b0 + >; + }; + + pinctrl_enet_100M: enet-100M-grp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x000b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b1 + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x120b0 + >; + }; + + pinctrl_flexcan1: flexcan1-grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2-grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1-grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2-grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3-grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pmic_hw300: pmic-hw300-grp { + fsl,pins = < + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1B0B0 + >; + }; + + pinctrl_rtc_hw300: rtc-hw300-grp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x120B0 + >; + }; + + pinctrl_tsc2004_hw300: tsc2004-hw300-grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x120B0 + >; + }; + + pinctrl_uart1: uart1-grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x4001b0b1 + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x4001b0b1 + MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x4001b0b1 + MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x4001b0b1 + MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x4001b0b1 + >; + }; + + pinctrl_uart4: uart4-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x4001b0b1 + >; + }; + + pinctrl_usbh1: usbh1-grp { + fsl,pins = < + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x120B0 + >; + }; + + pinctrl_usbotg: usbotg-grp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2-grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x120B0 + >; + }; + + pinctrl_usdhc3: usdhc3-grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x120B0 + >; + }; + + pinctrl_usdhc4: usdhc4-grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; +}; + +®_arm { + vin-supply = <&sw3_reg>; +}; + +®_soc { + vin-supply = <&sw1_reg>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + rng-gpios = <&gpio2 31 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + vbus-supply = <®_usb_h1_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + dr_mode = "otg"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>; + fsl,wp-controller; + keep-power-in-suspend; + status = "disabled"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + non-removable; + bus-width = <8>; + no-1-8-v; + keep-power-in-suspend; + status = "okay"; +}; diff --git a/arch/arm/dts/imx6q-novena.dts b/arch/arm/dts/imx6q-novena.dts new file mode 100644 index 00000000000..35383c9a2b1 --- /dev/null +++ b/arch/arm/dts/imx6q-novena.dts @@ -0,0 +1,797 @@ +/* + * Copyright 2015 Sutajio Ko-Usagi PTE LTD + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Kosagi Novena Dual/Quad"; + compatible = "kosagi,imx6q-novena", "fsl,imx6q"; + + /* Will be filled by the bootloader */ + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0>; + }; + + aliases { + mmc0 = &usdhc3; + mmc1 = &usdhc2; + }; + + chosen { + stdout-path = &uart2; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 10000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight_novena>; + power-supply = <®_lvds_lcd>; + brightness-levels = <0 3 6 12 16 24 32 48 64 96 128 192 255>; + default-brightness-level = <12>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys_novena>; + + user-button { + label = "User Button"; + gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + }; + + lid { + label = "Lid"; + gpios = <&gpio4 12 GPIO_ACTIVE_LOW>; + linux,input-type = <5>; /* EV_SW */ + linux,code = <0>; /* SW_LID */ + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds_novena>; + + heartbeat { + label = "novena:white:panel"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; + + panel: panel { + compatible = "innolux,n133hse-ea1", "simple-panel"; + backlight = <&backlight>; + }; + + reg_2p5v: regulator-2p5v { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_audio_codec: regulator-audio-codec { + compatible = "regulator-fixed"; + regulator-name = "es8328-power"; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <400000>; + gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_display: regulator-display { + compatible = "regulator-fixed"; + regulator-name = "lcd-display-power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <200000>; + gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_lvds_lcd: regulator-lvds-lcd { + compatible = "regulator-fixed"; + regulator-name = "lcd-lvds-power"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_pcie: regulator-pcie { + compatible = "regulator-fixed"; + regulator-name = "pcie-bus-power"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_sata: regulator-sata { + compatible = "regulator-fixed"; + regulator-name = "sata-power"; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <10000>; + gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + }; + + sound { + compatible = "fsl,imx-audio-es8328"; + model = "imx-audio-es8328"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-amp-supply = <®_audio_codec>; + jack-gpio = <&gpio5 15 GPIO_ACTIVE_HIGH>; + audio-routing = + "Speaker", "LOUT2", + "Speaker", "ROUT2", + "Speaker", "audio-amp", + "Headphone", "ROUT1", + "Headphone", "LOUT1", + "LINPUT1", "Mic Jack", + "RINPUT1", "Mic Jack", + "Mic Jack", "Mic Bias"; + mux-int-port = <0x1>; + mux-ext-port = <0x3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_novena>; + status = "okay"; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3_novena>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_novena>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + rxc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + txc-skew-ps = <3000>; + txen-skew-ps = <0>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txd0-skew-ps = <3000>; + txd1-skew-ps = <3000>; + txd2-skew-ps = <3000>; + txd3-skew-ps = <3000>; + status = "okay"; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi_novena>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_novena>; + status = "okay"; + + accel: mma8452@1c { + compatible = "fsl,mma8452"; + reg = <0x1c>; + }; + + rtc: pcf8523@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + }; + + sbs_battery: bq20z75@b { + compatible = "sbs,sbs-battery"; + reg = <0x0b>; + sbs,i2c-retry-count = <50>; + }; + + touch: stmpe811@44 { + compatible = "st,stmpe811"; + reg = <0x44>; + irq-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_stmpe_novena>; + vio-supply = <®_3p3v>; + vcc-supply = <®_3p3v>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + st,sample-time = <4>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,adc-freq = <1>; + st,ave-ctrl = <1>; + st,touch-det-delay = <2>; + st,settling = <2>; + st,fraction-z = <7>; + st,i-drive = <1>; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_novena>; + status = "okay"; + + pmic: pfuze100@8 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + reg_sw1a: sw1a { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + reg_sw1c: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_sw2: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_sw3a: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_sw3b: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_sw4: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + reg_swbst: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + regulator-boot-on; + }; + + reg_snvs: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vref: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + reg_vgen1: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + reg_vgen2: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + reg_vgen3: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + reg_vgen4: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vgen5: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_vgen6: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3_novena>; + status = "okay"; + + codec: es8328@11 { + compatible = "everest,es8328"; + reg = <0x11>; + DVDD-supply = <®_audio_codec>; + AVDD-supply = <®_audio_codec>; + PVDD-supply = <®_audio_codec>; + HPVDD-supply = <®_audio_codec>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sound_novena>; + clocks = <&clks IMX6QDL_CLK_CKO1>; + assigned-clocks = <&clks IMX6QDL_CLK_CKO>, + <&clks IMX6QDL_CLK_CKO1_SEL>, + <&clks IMX6QDL_CLK_PLL4_AUDIO>, + <&clks IMX6QDL_CLK_CKO1>; + assigned-clock-parents = <&clks IMX6QDL_CLK_CKO1>, + <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>, + <&clks IMX6QDL_CLK_OSC>, + <&clks IMX6QDL_CLK_CKO1_PODF>; + assigned-clock-rates = <0 0 722534400 22579200>; + }; +}; + +&kpp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kpp_novena>; + linux,keymap = < + MATRIX_KEY(1, 1, KEY_CONFIG) + >; + status = "okay"; +}; + +&ldb { + fsl,dual-channel; + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "jeida"; + fsl,data-width = <24>; + fsl,panel = <&panel>; + status = "okay"; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie_novena>; + reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>; + vpcie-supply = <®_pcie>; + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&sata { + target-supply = <®_sata>; + fsl,transmit-level-mV = <1025>; + fsl,transmit-boost-mdB = <0>; + fsl,transmit-atten-16ths = <8>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_novena>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_novena>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_novena>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + dr_mode = "otg"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_novena>; + disable-over-current; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_swbst>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_novena>; + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + bus-width = <4>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_novena>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&iomuxc { + pinctrl_audmux_novena: audmuxgrp-novena { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_backlight_novena: backlightgrp-novena { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0 + MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x1b0b1 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b1 + >; + }; + + pinctrl_ecspi3_novena: ecspi3grp-novena { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + >; + }; + + pinctrl_enet_novena: enetgrp-novena { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b020 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b028 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b028 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b028 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b028 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b028 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + /* Ethernet reset */ + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b1 + >; + }; + + pinctrl_fpga_gpio: fpgagpiogrp-novena { + fsl,pins = < + /* FPGA power */ + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b1 + /* Reset */ + MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1b0b1 + /* FPGA GPIOs */ + MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b1 + MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x1b0b1 + MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b0b1 + MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x1b0b1 + MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1 + MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1 + MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x1b0b1 + MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b1 + MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x1b0b1 + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x1b0b1 + MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x1b0b1 + MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x1b0b1 + MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x1b0b1 + MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b1 + MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x1b0b1 + MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1b0b1 + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b1 + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b1 + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 + MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b1 + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b1 + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b1 + MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x1b0b1 + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b1 + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b1 + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b1 + >; + }; + + pinctrl_fpga_eim: fpgaeimgrp-novena { + fsl,pins = < + /* FPGA power */ + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b1 + /* Reset */ + MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1b0b1 + /* FPGA GPIOs */ + MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0f1 + MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0f1 + MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0f1 + MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0f1 + MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0f1 + MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0f1 + MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0f1 + MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0f1 + MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0f1 + MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0f1 + MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0f1 + MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0f1 + MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0f1 + MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0f1 + MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0f1 + MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0f1 + MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0f1 + MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0f1 + MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0f1 + MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0f1 + MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0f1 + MX6QDL_PAD_EIM_LBA__EIM_LBA_B 0xb0f1 + MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0f1 + MX6QDL_PAD_EIM_RW__EIM_RW 0xb0f1 + MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb0f1 + MX6QDL_PAD_EIM_BCLK__EIM_BCLK 0xb0f1 + >; + }; + + pinctrl_gpio_keys_novena: gpiokeysgrp-novena { + fsl,pins = < + /* User button */ + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 + /* PCIe Wakeup */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1f0e0 + /* Lid switch */ + MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0 + >; + }; + + pinctrl_hdmi_novena: hdmigrp-novena { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b1 + >; + }; + + pinctrl_i2c1_novena: i2c1grp-novena { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2_novena: i2c2grp-novena { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3_novena: i2c3grp-novena { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_kpp_novena: kppgrp-novena { + fsl,pins = < + /* Front panel button */ + MX6QDL_PAD_KEY_ROW1__KEY_ROW1 0x1b0b1 + /* Fake column driver, not connected */ + MX6QDL_PAD_KEY_COL1__KEY_COL1 0x1b0b1 + >; + }; + + pinctrl_leds_novena: ledsgrp-novena { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b1 + >; + }; + + pinctrl_pcie_novena: pciegrp-novena { + fsl,pins = < + /* Reset */ + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b1 + /* Power On */ + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b1 + /* Wifi kill */ + MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x1b0b1 + >; + }; + + pinctrl_sata_novena: satagrp-novena { + fsl,pins = < + MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b1 + >; + }; + + pinctrl_senoko_novena: senokogrp-novena { + fsl,pins = < + /* Senoko IRQ line */ + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x13048 + /* Senoko reset line */ + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1b0b1 + >; + }; + + pinctrl_sound_novena: soundgrp-novena { + fsl,pins = < + /* Audio power regulator */ + MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b1 + /* Headphone plug */ + MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b1 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + >; + }; + + pinctrl_stmpe_novena: stmpegrp-novena { + fsl,pins = < + /* Touchscreen interrupt */ + MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b1 + >; + }; + + pinctrl_uart2_novena: uart2grp-novena { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3_novena: uart3grp-novena { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4_novena: uart4grp-novena { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg_novena: usbotggrp-novena { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc2_novena: usdhc2grp-novena { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9 + /* Write protect */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1 + /* Card detect */ + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b1 + >; + }; + + pinctrl_usdhc3_novena: usdhc3grp-novena { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 + >; + }; +}; diff --git a/arch/arm/dts/imx6qdl-u-boot.dtsi b/arch/arm/dts/imx6qdl-u-boot.dtsi index 0aa29e38b83..e161ebb9af4 100644 --- a/arch/arm/dts/imx6qdl-u-boot.dtsi +++ b/arch/arm/dts/imx6qdl-u-boot.dtsi @@ -4,6 +4,10 @@ */ / { + aliases { + usb0 = &usbotg; + }; + soc { u-boot,dm-spl; diff --git a/arch/arm/dts/imx6sx-softing-vining-2000.dts b/arch/arm/dts/imx6sx-softing-vining-2000.dts new file mode 100644 index 00000000000..371890ff608 --- /dev/null +++ b/arch/arm/dts/imx6sx-softing-vining-2000.dts @@ -0,0 +1,578 @@ +/* + * Copyright (C) 2016 Christoph Fritz <chf.fritz@googlemail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "imx6sx.dtsi" + +/ { + model = "Softing VIN|ING 2000"; + compatible = "samtec,imx6sx-vining-2000", "fsl,imx6sx"; + + aliases { + mmc0 = &usdhc4; + mmc1 = &usdhc2; + }; + + chosen { + stdout-path = &uart1; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + reg_usb_otg1_vbus: regulator-usb_otg1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg1_vbus"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_peri_3v3: regulator-peri_3v3 { + compatible = "regulator-fixed"; + regulator-name = "peri_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pwmleds { + compatible = "pwm-leds"; + + red { + label = "red"; + max-brightness = <255>; + pwms = <&pwm6 0 50000>; + }; + + green { + label = "green"; + max-brightness = <255>; + pwms = <&pwm2 0 50000>; + }; + + blue { + label = "blue"; + max-brightness = <255>; + pwms = <&pwm1 0 50000>; + }; + }; +}; + +&adc1 { + vref-supply = <®_peri_3v3>; + status = "okay"; +}; + +&cpu0 { + /* + * This board has a shared rail of reg_arm and reg_soc (supplied by + * sw1a_reg) which is modeled below, but still this module behaves + * unstable without higher voltages. Hence, set higher voltages here. + */ + operating-points = < + /* kHz uV */ + 996000 1250000 + 792000 1175000 + 396000 1175000 + 198000 1175000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC uV */ + 996000 1250000 + 792000 1175000 + 396000 1175000 + 198000 1175000 + >; +}; + +&ecspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + cs-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-supply = <®_peri_3v3>; + phy-reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>; + phy-reset-duration = <5>; + phy-mode = "rmii"; + phy-handle = <ðphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet0-phy@0 { + reg = <0>; + max-speed = <100>; + interrupt-parent = <&gpio2>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + phy-supply = <®_peri_3v3>; + phy-reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>; + phy-reset-duration = <5>; + phy-mode = "rmii"; + phy-handle = <ðphy1>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy1: ethernet1-phy@0 { + reg = <0>; + max-speed = <100>; + interrupt-parent = <&gpio2>; + interrupts = <19 IRQ_TYPE_LEVEL_LOW>; + }; + }; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + proximity: sx9500@28 { + compatible = "semtech,sx9500"; + reg = <0x28>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sx9500>; + interrupt-parent = <&gpio2>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + }; + + pmic: pfuze100@8 { + compatible = "fsl,pfuze200"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpios>; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6SX_PAD_SD3_CLK__ECSPI4_SCLK 0x130b1 + MX6SX_PAD_SD3_DATA3__ECSPI4_MISO 0x130b1 + MX6SX_PAD_SD3_CMD__ECSPI4_MOSI 0x130b1 + MX6SX_PAD_SD3_DATA2__GPIO7_IO_4 0x30b0 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x30c1 + MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x30c1 + MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0f9 + MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0f9 + MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x30c1 + MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0f9 + MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4000a038 + /* LAN8720 PHY Reset */ + MX6SX_PAD_RGMII1_TD3__GPIO5_IO_9 0x10b0 + /* MDIO */ + MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0f9 + MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0f9 + /* IRQ from PHY */ + MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x10b0 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0x1b0b0 + MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0x1b0b0 + MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x1b0b0 + MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x1b0b0 + MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x1b0b0 + MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0x1b0b0 + MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4000a038 + /* LAN8720 PHY Reset */ + MX6SX_PAD_RGMII2_TD3__GPIO5_IO_21 0x10b0 + /* MDIO */ + MX6SX_PAD_ENET1_COL__ENET2_MDC 0xa0f9 + MX6SX_PAD_ENET1_CRS__ENET2_MDIO 0xa0f9 + /* IRQ from PHY */ + MX6SX_PAD_KEY_ROW4__GPIO2_IO_19 0x10b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b0b0 + MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b0b0 + MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b0b0 + >; + }; + + pinctrl_gpios: gpiosgrp { + fsl,pins = < + /* reset external uC */ + MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19 0x10b0 + /* IRQ from external uC */ + MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x10b0 + /* overcurrent detection */ + MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8 0x10b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1 + MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6SX_PAD_NAND_ALE__I2C3_SDA 0x4001b8b1 + MX6SX_PAD_NAND_CLE__I2C3_SCL 0x4001b8b1 + >; + }; + + pinctrl_pwm1: pwm1grp-1 { + fsl,pins = < + /* blue LED */ + MX6SX_PAD_RGMII2_RD3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp-1 { + fsl,pins = < + /* green LED */ + MX6SX_PAD_RGMII2_RD2__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm6: pwm6grp-1 { + fsl,pins = < + /* red LED */ + MX6SX_PAD_RGMII2_TD2__PWM6_OUT 0x1b0b1 + >; + }; + + pinctrl_sx9500: sx9500grp { + fsl,pins = < + /* Reset */ + MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x838 + /* IRQ */ + MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x70e0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1 + >; + }; + + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0 + >; + }; + + pinctrl_usb_otg1_id: usbotg1idgrp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059 + >; + }; + + pinctrl_usdhc2_50mhz: usdhc2grp-50mhz { + fsl,pins = < + MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059 + MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059 + MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059 + MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059 + MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059 + MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059 + MX6SX_PAD_LCD1_VSYNC__GPIO3_IO_28 0x1b000 + MX6SX_PAD_LCD1_HSYNC__GPIO3_IO_26 0x10b0 + >; + }; + + pinctrl_usdhc2_100mhz: usdhc2grp-100mhz { + fsl,pins = < + MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x100b9 + MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x170b9 + MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x170b9 + MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x170b9 + MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x170b9 + MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x170b9 + >; + }; + + pinctrl_usdhc2_200mhz: usdhc2grp-200mhz { + fsl,pins = < + MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x100f9 + MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x170f9 + MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x170f9 + MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x170f9 + MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x170f9 + MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x170f9 + >; + }; + + pinctrl_usdhc4_50mhz: usdhc4grp-50mhz { + fsl,pins = < + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059 + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059 + MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x17059 + MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x17059 + MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x17059 + MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x17059 + MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B 0x17068 + >; + }; + + pinctrl_usdhc4_100mhz: usdhc4-100mhz { + fsl,pins = < + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100b9 + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170b9 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170b9 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170b9 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170b9 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170b9 + MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170b9 + MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170b9 + MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170b9 + MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc4_200mhz: usdhc4-200mhz { + fsl,pins = < + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100f9 + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170f9 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170f9 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170f9 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170f9 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170f9 + MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170f9 + MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170f9 + MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170f9 + MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170f9 + >; + }; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm6 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm6>; + status = "okay"; +}; + +®_arm { + vin-supply = <&sw1a_reg>; +}; + +®_soc { + vin-supply = <&sw1a_reg>; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2_50mhz>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + cd-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc4 { + /* hs200-mode is currently unsupported because Vccq is on 3.1V, but + * not on necessary 1.8V. + */ + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc4_50mhz>; + pinctrl-1 = <&pinctrl_usdhc4_100mhz>; + pinctrl-2 = <&pinctrl_usdhc4_200mhz>; + bus-width = <8>; + keep-power-in-suspend; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; diff --git a/arch/arm/dts/imx6ul-phycore-segin.dts b/arch/arm/dts/imx6ul-phycore-segin.dts index a46012e2b44..7d68bf84305 100644 --- a/arch/arm/dts/imx6ul-phycore-segin.dts +++ b/arch/arm/dts/imx6ul-phycore-segin.dts @@ -16,7 +16,8 @@ /dts-v1/; -#include "imx6ul-pcl063.dtsi" +#include "imx6ul.dtsi" +#include "pcl063-common.dtsi" / { model = "Phytec phyBOARD-i.MX6UL-Segin SBC"; @@ -24,6 +25,10 @@ "fsl,imx6ul"; }; +&gpmi { + status = "okay"; +}; + &i2c1 { i2c_rtc: rtc@68 { compatible = "microcrystal,rv4162"; diff --git a/arch/arm/dts/imx6ull-colibri.dts b/arch/arm/dts/imx6ull-colibri.dts index 4196cbdf221..6c847ab7921 100644 --- a/arch/arm/dts/imx6ull-colibri.dts +++ b/arch/arm/dts/imx6ull-colibri.dts @@ -220,7 +220,7 @@ /* Colibri USBC */ &usbotg1 { - dr_mode = "otg"; + dr_mode = "host"; srp-disable; hnp-disable; adp-disable; diff --git a/arch/arm/dts/imx6ull-phycore-segin.dts b/arch/arm/dts/imx6ull-phycore-segin.dts new file mode 100644 index 00000000000..6df3ad2e4a4 --- /dev/null +++ b/arch/arm/dts/imx6ull-phycore-segin.dts @@ -0,0 +1,70 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Parthiban Nallathambi <parthitce@gmail.com> + */ + +/dts-v1/; + +#include "imx6ull.dtsi" +#include "pcl063-common.dtsi" + +/ { + model = "Phytec phyBOARD-i.MX6ULL-Segin SBC"; + compatible = "phytec,phyboard-imx6ull-segin", "phytec,imx6ull-pcl063", + "fsl,imx6ull"; +}; + +&i2c1 { + i2c_rtc: rtc@68 { + compatible = "microcrystal,rv4162"; + reg = <0x68>; + status = "okay"; + }; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + uart-has-rtscts; + status = "okay"; +}; + +&usdhc2 { + status = "okay"; +}; + +&usbotg1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + dr_mode = "otg"; + srp-disable; + hnp-disable; + adp-disable; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1 + MX6UL_PAD_UART5_RX_DATA__UART5_DCE_RX 0x1b0b1 + MX6UL_PAD_GPIO1_IO08__UART5_DCE_RTS 0x1b0b1 + MX6UL_PAD_GPIO1_IO09__UART5_DCE_CTS 0x1b0b1 + >; + }; + + pinctrl_usb_otg1_id: usbotg1idgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059 + >; + }; + +}; diff --git a/arch/arm/dts/imx6ull-u-boot.dtsi b/arch/arm/dts/imx6ull-u-boot.dtsi new file mode 100644 index 00000000000..74ca95fa2c8 --- /dev/null +++ b/arch/arm/dts/imx6ull-u-boot.dtsi @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Parthiban Nallathambi <parthitce@gmail.com> + */ + +/ { + soc { + u-boot,dm-spl; + }; +}; + +&aips1 { + u-boot,dm-spl; +}; + +&aips2 { + u-boot,dm-spl; +}; + +&aips3 { + u-boot,dm-spl; +}; + +&gpio1 { + u-boot,dm-spl; +}; + +&gpio4 { + u-boot,dm-spl; +}; + +&iomuxc { + u-boot,dm-spl; +}; diff --git a/arch/arm/dts/imx7-colibri-emmc.dts b/arch/arm/dts/imx7-colibri-emmc.dts index 8db2a627078..bc0d10c716d 100644 --- a/arch/arm/dts/imx7-colibri-emmc.dts +++ b/arch/arm/dts/imx7-colibri-emmc.dts @@ -15,11 +15,30 @@ mmc0 = &usdhc3; mmc1 = &usdhc1; display1 = &lcdif; + usb0 = &usbotg1; /* required for ums */ }; chosen { stdout-path = &uart1; }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; }; &usdhc3 { @@ -46,4 +65,30 @@ MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19 >; }; + + pinctrl_usbh_reg: gpio-usbh-vbus { + fsl,pins = < + MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 + >; + }; +}; + +/* Colibri USBC */ +&usbotg1 { + /* + * usbotg1 on Colibri iMX7 can function in both host/otg modes. + * Gadget stack currently does not look at this at all while + * the host stack refuses to bind/load if it is not set to host + * (it obviously won't be enumerated during usb start invocation + * if dr_mode = "otg") + */ + dr_mode = "host"; + status = "okay"; +}; + +/* Colibri USBH */ +&usbotg2 { + dr_mode = "host"; + vbus-supply = <®_usbh_vbus>; + status = "okay"; }; diff --git a/arch/arm/dts/imx7-colibri-rawnand.dts b/arch/arm/dts/imx7-colibri-rawnand.dts index 4eb86fb011e..5f12a2ac2a3 100644 --- a/arch/arm/dts/imx7-colibri-rawnand.dts +++ b/arch/arm/dts/imx7-colibri-rawnand.dts @@ -13,6 +13,28 @@ chosen { stdout-path = &uart1; }; + + aliases { + usb0 = &usbotg1; /* required for ums */ + }; + + reg_5v0: regulator-5v0 { + compatible = "regulator-fixed"; + regulator-name = "5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbh_vbus: regulator-usbh-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh_reg>; + regulator-name = "VCC_USB[1-4]"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; + vin-supply = <®_5v0>; + }; }; &gpmi { @@ -43,4 +65,30 @@ MX7D_PAD_SD3_DATA7__NAND_DATA07 0x71 >; }; + + pinctrl_usbh_reg: gpio-usbh-vbus { + fsl,pins = < + MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 + >; + }; +}; + +/* Colibri USBC */ +&usbotg1 { + /* + * usbotg1 on Colibri iMX7 can function in both host/otg modes. + * Gadget stack currently does not look at this at all while + * the host stack refuses to bind/load if it is not set to host + * (it obviously won't be enumerated during usb start invocation + * if dr_mode = "otg") + */ + dr_mode = "host"; + status = "okay"; +}; + +/* Colibri USBH */ +&usbotg2 { + dr_mode = "host"; + vbus-supply = <®_usbh_vbus>; + status = "okay"; }; diff --git a/arch/arm/dts/imx6ul-pcl063.dtsi b/arch/arm/dts/pcl063-common.dtsi index 24a6a479835..2b14b2dc5fa 100644 --- a/arch/arm/dts/imx6ul-pcl063.dtsi +++ b/arch/arm/dts/pcl063-common.dtsi @@ -7,10 +7,6 @@ * Author: Christian Hemp <c.hemp@phytec.de> */ -/dts-v1/; - -#include "imx6ul.dtsi" - / { model = "Phytec phyCORE-i.MX6 Ultra Lite SOM"; compatible = "phytec,imx6ul-pcl063", "fsl,imx6ul"; @@ -47,7 +43,7 @@ pinctrl-0 = <&pinctrl_gpmi_nand>; nand-on-flash-bbt; fsl,no-blockmark-swap; - status = "okay"; + status = "disabled"; #address-cells = <1>; #size-cells = <1>; @@ -99,6 +95,18 @@ status = "okay"; }; +&usdhc2 { + u-boot,dm-spl; + u-boot,dm-pre-reloc; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <8>; + no-1-8-v; + non-removable; + keep-power-in-suspend; + status = "disabled"; +}; + &iomuxc { pinctrl-names = "default"; @@ -170,4 +178,19 @@ >; }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9 + MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9 + MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9 + MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9 + MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9 + MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9 + MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9 + MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9 + MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9 + MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9 + >; + }; }; diff --git a/arch/arm/include/asm/arch-imx/imx-regs.h b/arch/arm/include/asm/arch-imx/imx-regs.h deleted file mode 100644 index 93e336951cd..00000000000 --- a/arch/arm/include/asm/arch-imx/imx-regs.h +++ /dev/null @@ -1,637 +0,0 @@ -#ifndef _IMX_REGS_H -#define _IMX_REGS_H - -#define ARCH_MXC - -/* ------------------------------------------------------------------------ - * Motorola IMX system registers - * ------------------------------------------------------------------------ - * - */ - -#define IO_ADDRESS(x) ((x) | IMX_IO_BASE) - -# ifndef __ASSEMBLY__ -# define __REG(x) (*((volatile u32 *)IO_ADDRESS(x))) -# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y))) -# else -# define __REG(x) (x) -# define __REG2(x,y) ((x)+(y)) -#endif - -#define IMX_IO_BASE 0x00200000 - -/* - * Register BASEs, based on OFFSETs - * - */ -#define IMX_AIPI1_BASE (0x00000 + IMX_IO_BASE) -#define IMX_WDT_BASE (0x01000 + IMX_IO_BASE) -#define IMX_TIM1_BASE (0x02000 + IMX_IO_BASE) -#define IMX_TIM2_BASE (0x03000 + IMX_IO_BASE) -#define IMX_RTC_BASE (0x04000 + IMX_IO_BASE) -#define IMX_LCDC_BASE (0x05000 + IMX_IO_BASE) -#define IMX_UART1_BASE (0x06000 + IMX_IO_BASE) -#define IMX_UART2_BASE (0x07000 + IMX_IO_BASE) -#define IMX_PWM_BASE (0x08000 + IMX_IO_BASE) -#define IMX_DMAC_BASE (0x09000 + IMX_IO_BASE) -#define IMX_AIPI2_BASE (0x10000 + IMX_IO_BASE) -#define IMX_SIM_BASE (0x11000 + IMX_IO_BASE) -#define IMX_USBD_BASE (0x12000 + IMX_IO_BASE) -#define IMX_SPI1_BASE (0x13000 + IMX_IO_BASE) -#define IMX_MMC_BASE (0x14000 + IMX_IO_BASE) -#define IMX_ASP_BASE (0x15000 + IMX_IO_BASE) -#define IMX_BTA_BASE (0x16000 + IMX_IO_BASE) -#define I2C1_BASE_ADDR (0x17000 + IMX_IO_BASE) -#define IMX_SSI_BASE (0x18000 + IMX_IO_BASE) -#define IMX_SPI2_BASE (0x19000 + IMX_IO_BASE) -#define IMX_MSHC_BASE (0x1A000 + IMX_IO_BASE) -#define IMX_PLL_BASE (0x1B000 + IMX_IO_BASE) -#define IMX_SYSCTRL_BASE (0x1B800 + IMX_IO_BASE) -#define IMX_GPIO_BASE (0x1C000 + IMX_IO_BASE) -#define IMX_EIM_BASE (0x20000 + IMX_IO_BASE) -#define IMX_SDRAMC_BASE (0x21000 + IMX_IO_BASE) -#define IMX_MMA_BASE (0x22000 + IMX_IO_BASE) -#define IMX_AITC_BASE (0x23000 + IMX_IO_BASE) -#define IMX_CSI_BASE (0x24000 + IMX_IO_BASE) - -/* Watchdog Registers*/ - -#define WCR __REG(IMX_WDT_BASE + 0x00) /* Watchdog Control Register */ -#define WSR __REG(IMX_WDT_BASE + 0x04) /* Watchdog Service Register */ -#define WSTR __REG(IMX_WDT_BASE + 0x08) /* Watchdog Status Register */ - -/* SYSCTRL Registers */ -#define SIDR __REG(IMX_SYSCTRL_BASE + 0x4) /* Silicon ID Register */ -#define FMCR __REG(IMX_SYSCTRL_BASE + 0x8) /* Function Multiplex Control Register */ -#define GPCR __REG(IMX_SYSCTRL_BASE + 0xC) /* Function Multiplex Control Register */ - -/* Chip Select Registers */ -#define CS0U __REG(IMX_EIM_BASE) /* Chip Select 0 Upper Register */ -#define CS0L __REG(IMX_EIM_BASE + 0x4) /* Chip Select 0 Lower Register */ -#define CS1U __REG(IMX_EIM_BASE + 0x8) /* Chip Select 1 Upper Register */ -#define CS1L __REG(IMX_EIM_BASE + 0xc) /* Chip Select 1 Lower Register */ -#define CS2U __REG(IMX_EIM_BASE + 0x10) /* Chip Select 2 Upper Register */ -#define CS2L __REG(IMX_EIM_BASE + 0x14) /* Chip Select 2 Lower Register */ -#define CS3U __REG(IMX_EIM_BASE + 0x18) /* Chip Select 3 Upper Register */ -#define CS3L __REG(IMX_EIM_BASE + 0x1c) /* Chip Select 3 Lower Register */ -#define CS4U __REG(IMX_EIM_BASE + 0x20) /* Chip Select 4 Upper Register */ -#define CS4L __REG(IMX_EIM_BASE + 0x24) /* Chip Select 4 Lower Register */ -#define CS5U __REG(IMX_EIM_BASE + 0x28) /* Chip Select 5 Upper Register */ -#define CS5L __REG(IMX_EIM_BASE + 0x2c) /* Chip Select 5 Lower Register */ -#define EIM __REG(IMX_EIM_BASE + 0x30) /* EIM Configuration Register */ - -/* SDRAM controller registers */ - -#define SDCTL0 __REG(IMX_SDRAMC_BASE) /* SDRAM 0 Control Register */ -#define SDCTL1 __REG(IMX_SDRAMC_BASE + 0x4) /* SDRAM 1 Control Register */ -#define SDMISC __REG(IMX_SDRAMC_BASE + 0x14) /* Miscellaneous Register */ -#define SDRST __REG(IMX_SDRAMC_BASE + 0x18) /* SDRAM Reset Register */ - -/* PLL registers */ -#define CSCR __REG(IMX_PLL_BASE) /* Clock Source Control Register */ -#define CSCR_SPLL_RESTART (1<<22) -#define CSCR_MPLL_RESTART (1<<21) -#define CSCR_SYSTEM_SEL (1<<16) -#define CSCR_BCLK_DIV (0xf<<10) -#define CSCR_MPU_PRESC (1<<15) -#define CSCR_SPEN (1<<1) -#define CSCR_MPEN (1<<0) - -#define MPCTL0 __REG(IMX_PLL_BASE + 0x4) /* MCU PLL Control Register 0 */ -#define MPCTL1 __REG(IMX_PLL_BASE + 0x8) /* MCU PLL and System Clock Register 1 */ -#define SPCTL0 __REG(IMX_PLL_BASE + 0xc) /* System PLL Control Register 0 */ -#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */ -#define PCDR __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */ - -/* - * GPIO Module and I/O Multiplexer - * x = 0..3 for reg_A, reg_B, reg_C, reg_D - */ -#define DDIR(x) __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8) -#define OCR1(x) __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8) -#define OCR2(x) __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8) -#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8) -#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8) -#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8) -#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8) -#define DR(x) __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8) -#define GIUS(x) __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8) -#define SSR(x) __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8) -#define ICR1(x) __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8) -#define ICR2(x) __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8) -#define IMR(x) __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8) -#define ISR(x) __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8) -#define GPR(x) __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8) -#define SWR(x) __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8) -#define PUEN(x) __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8) - -#define GPIO_PORT_MAX 3 - -#define GPIO_PIN_MASK 0x1f -#define GPIO_PORT_MASK (0x3 << 5) - -#define GPIO_PORT_SHIFT 5 -#define GPIO_PORTA (0<<5) -#define GPIO_PORTB (1<<5) -#define GPIO_PORTC (2<<5) -#define GPIO_PORTD (3<<5) - -#define GPIO_OUT (1<<7) -#define GPIO_IN (0<<7) -#define GPIO_PUEN (1<<8) - -#define GPIO_PF (0<<9) -#define GPIO_AF (1<<9) - -#define GPIO_OCR_SHIFT 10 -#define GPIO_OCR_MASK (3<<10) -#define GPIO_AIN (0<<10) -#define GPIO_BIN (1<<10) -#define GPIO_CIN (2<<10) -#define GPIO_DR (3<<10) - -#define GPIO_AOUT_SHIFT 12 -#define GPIO_AOUT_MASK (3<<12) -#define GPIO_AOUT (0<<12) -#define GPIO_AOUT_ISR (1<<12) -#define GPIO_AOUT_0 (2<<12) -#define GPIO_AOUT_1 (3<<12) - -#define GPIO_BOUT_SHIFT 14 -#define GPIO_BOUT_MASK (3<<14) -#define GPIO_BOUT (0<<14) -#define GPIO_BOUT_ISR (1<<14) -#define GPIO_BOUT_0 (2<<14) -#define GPIO_BOUT_1 (3<<14) - -#define GPIO_GIUS (1<<16) - -/* assignements for GPIO alternate/primary functions */ - -/* FIXME: This list is not completed. The correct directions are - * missing on some (many) pins - */ -#define PA0_AIN_SPI2_CLK ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0 ) -#define PA0_AF_ETMTRACESYNC ( GPIO_PORTA | GPIO_AF | 0 ) -#define PA1_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1 ) -#define PA1_PF_TIN ( GPIO_PORTA | GPIO_PF | 1 ) -#define PA2_PF_PWM0 ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 ) -#define PA3_PF_CSI_MCLK ( GPIO_PORTA | GPIO_PF | 3 ) -#define PA4_PF_CSI_D0 ( GPIO_PORTA | GPIO_PF | 4 ) -#define PA5_PF_CSI_D1 ( GPIO_PORTA | GPIO_PF | 5 ) -#define PA6_PF_CSI_D2 ( GPIO_PORTA | GPIO_PF | 6 ) -#define PA7_PF_CSI_D3 ( GPIO_PORTA | GPIO_PF | 7 ) -#define PA8_PF_CSI_D4 ( GPIO_PORTA | GPIO_PF | 8 ) -#define PA9_PF_CSI_D5 ( GPIO_PORTA | GPIO_PF | 9 ) -#define PA10_PF_CSI_D6 ( GPIO_PORTA | GPIO_PF | 10 ) -#define PA11_PF_CSI_D7 ( GPIO_PORTA | GPIO_PF | 11 ) -#define PA12_PF_CSI_VSYNC ( GPIO_PORTA | GPIO_PF | 12 ) -#define PA13_PF_CSI_HSYNC ( GPIO_PORTA | GPIO_PF | 13 ) -#define PA14_PF_CSI_PIXCLK ( GPIO_PORTA | GPIO_PF | 14 ) -#define PA15_PF_I2C_SDA ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 ) -#define PA16_PF_I2C_SCL ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 ) -#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 ) -#define PA17_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17 ) -#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 ) -#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 ) -#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 ) -#define PA21_PF_A0 ( GPIO_PORTA | GPIO_PF | 21 ) -#define PA22_PF_CS4 ( GPIO_PORTA | GPIO_PF | 22 ) -#define PA23_PF_CS5 ( GPIO_PORTA | GPIO_PF | 23 ) -#define PA24_PF_A16 ( GPIO_PORTA | GPIO_PF | 24 ) -#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 ) -#define PA25_PF_A17 ( GPIO_PORTA | GPIO_PF | 25 ) -#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 ) -#define PA26_PF_A18 ( GPIO_PORTA | GPIO_PF | 26 ) -#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 ) -#define PA27_PF_A19 ( GPIO_PORTA | GPIO_PF | 27 ) -#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 ) -#define PA28_PF_A20 ( GPIO_PORTA | GPIO_PF | 28 ) -#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 ) -#define PA29_PF_A21 ( GPIO_PORTA | GPIO_PF | 29 ) -#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 ) -#define PA30_PF_A22 ( GPIO_PORTA | GPIO_PF | 30 ) -#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 ) -#define PA31_PF_A23 ( GPIO_PORTA | GPIO_PF | 31 ) -#define PA31_AF_ETMTRACECLK ( GPIO_PORTA | GPIO_AF | 31 ) -#define PB8_PF_SD_DAT0 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 ) -#define PB8_AF_MS_PIO ( GPIO_PORTB | GPIO_AF | 8 ) -#define PB9_PF_SD_DAT1 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9 ) -#define PB9_AF_MS_PI1 ( GPIO_PORTB | GPIO_AF | 9 ) -#define PB10_PF_SD_DAT2 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10 ) -#define PB10_AF_MS_SCLKI ( GPIO_PORTB | GPIO_AF | 10 ) -#define PB11_PF_SD_DAT3 ( GPIO_PORTB | GPIO_PF | 11 ) -#define PB11_AF_MS_SDIO ( GPIO_PORTB | GPIO_AF | 11 ) -#define PB12_PF_SD_CLK ( GPIO_PORTB | GPIO_PF | 12 ) -#define PB12_AF_MS_SCLK0 ( GPIO_PORTB | GPIO_AF | 12 ) -#define PB13_PF_SD_CMD ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 ) -#define PB13_AF_MS_BS ( GPIO_PORTB | GPIO_AF | 13 ) -#define PB14_AF_SSI_RXFS ( GPIO_PORTB | GPIO_AF | 14 ) -#define PB15_AF_SSI_RXCLK ( GPIO_PORTB | GPIO_AF | 15 ) -#define PB16_AF_SSI_RXDAT ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 ) -#define PB17_AF_SSI_TXDAT ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 ) -#define PB18_AF_SSI_TXFS ( GPIO_PORTB | GPIO_AF | 18 ) -#define PB19_AF_SSI_TXCLK ( GPIO_PORTB | GPIO_AF | 19 ) -#define PB20_PF_USBD_AFE ( GPIO_PORTB | GPIO_PF | 20 ) -#define PB21_PF_USBD_OE ( GPIO_PORTB | GPIO_PF | 21 ) -#define PB22_PFUSBD_RCV ( GPIO_PORTB | GPIO_PF | 22 ) -#define PB23_PF_USBD_SUSPND ( GPIO_PORTB | GPIO_PF | 23 ) -#define PB24_PF_USBD_VP ( GPIO_PORTB | GPIO_PF | 24 ) -#define PB25_PF_USBD_VM ( GPIO_PORTB | GPIO_PF | 25 ) -#define PB26_PF_USBD_VPO ( GPIO_PORTB | GPIO_PF | 26 ) -#define PB27_PF_USBD_VMO ( GPIO_PORTB | GPIO_PF | 27 ) -#define PB28_PF_UART2_CTS ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 ) -#define PB29_PF_UART2_RTS ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 ) -#define PB30_PF_UART2_TXD ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 ) -#define PB31_PF_UART2_RXD ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 ) -#define PC3_PF_SSI_RXFS ( GPIO_PORTC | GPIO_PF | 3 ) -#define PC4_PF_SSI_RXCLK ( GPIO_PORTC | GPIO_PF | 4 ) -#define PC5_PF_SSI_RXDAT ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 ) -#define PC6_PF_SSI_TXDAT ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 ) -#define PC7_PF_SSI_TXFS ( GPIO_PORTC | GPIO_PF | 7 ) -#define PC8_PF_SSI_TXCLK ( GPIO_PORTC | GPIO_PF | 8 ) -#define PC9_PF_UART1_CTS ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 ) -#define PC10_PF_UART1_RTS ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 ) -#define PC11_PF_UART1_TXD ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 ) -#define PC12_PF_UART1_RXD ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 ) -#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 ) -#define PC14_PF_SPI1_SCLK ( GPIO_PORTC | GPIO_PF | 14 ) -#define PC15_PF_SPI1_SS ( GPIO_PORTC | GPIO_PF | 15 ) -#define PC16_PF_SPI1_MISO ( GPIO_PORTC | GPIO_PF | 16 ) -#define PC17_PF_SPI1_MOSI ( GPIO_PORTC | GPIO_PF | 17 ) -#define PC24_BIN_UART3_RI ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24 ) -#define PC25_BIN_UART3_DSR ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25 ) -#define PC26_AOUT_UART3_DTR ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26 ) -#define PC27_BIN_UART3_DCD ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27 ) -#define PC28_BIN_UART3_CTS ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28 ) -#define PC29_AOUT_UART3_RTS ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29 ) -#define PC30_BIN_UART3_TX ( GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30 ) -#define PC31_AOUT_UART3_RX ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31) -#define PD6_PF_LSCLK ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 ) -#define PD7_PF_REV ( GPIO_PORTD | GPIO_PF | 7 ) -#define PD7_AF_UART2_DTR ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7 ) -#define PD7_AIN_SPI2_SCLK ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 ) -#define PD8_PF_CLS ( GPIO_PORTD | GPIO_PF | 8 ) -#define PD8_AF_UART2_DCD ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 ) -#define PD8_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8 ) -#define PD9_PF_PS ( GPIO_PORTD | GPIO_PF | 9 ) -#define PD9_AF_UART2_RI ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 ) -#define PD9_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9 ) -#define PD10_PF_SPL_SPR ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 ) -#define PD10_AF_UART2_DSR ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 ) -#define PD10_AIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10 ) -#define PD11_PF_CONTRAST ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 ) -#define PD12_PF_ACD_OE ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 ) -#define PD13_PF_LP_HSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 ) -#define PD14_PF_FLM_VSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 ) -#define PD15_PF_LD0 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 ) -#define PD16_PF_LD1 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 ) -#define PD17_PF_LD2 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 ) -#define PD18_PF_LD3 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 ) -#define PD19_PF_LD4 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 ) -#define PD20_PF_LD5 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 ) -#define PD21_PF_LD6 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 ) -#define PD22_PF_LD7 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 ) -#define PD23_PF_LD8 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 ) -#define PD24_PF_LD9 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 ) -#define PD25_PF_LD10 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 ) -#define PD26_PF_LD11 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 ) -#define PD27_PF_LD12 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 ) -#define PD28_PF_LD13 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 ) -#define PD29_PF_LD14 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 ) -#define PD30_PF_LD15 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 ) -#define PD31_PF_TMR2OUT ( GPIO_PORTD | GPIO_PF | 31 ) -#define PD31_BIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31 ) - -/* - * PWM controller - */ -#define PWMC __REG(IMX_PWM_BASE + 0x00) /* PWM Control Register */ -#define PWMS __REG(IMX_PWM_BASE + 0x04) /* PWM Sample Register */ -#define PWMP __REG(IMX_PWM_BASE + 0x08) /* PWM Period Register */ -#define PWMCNT __REG(IMX_PWM_BASE + 0x0C) /* PWM Counter Register */ - -#define PWMC_HCTR (0x01<<18) /* Halfword FIFO Data Swapping */ -#define PWMC_BCTR (0x01<<17) /* Byte FIFO Data Swapping */ -#define PWMC_SWR (0x01<<16) /* Software Reset */ -#define PWMC_CLKSRC (0x01<<15) /* Clock Source */ -#define PWMC_PRESCALER(x) (((x-1) & 0x7F) << 8) /* PRESCALER */ -#define PWMC_IRQ (0x01<< 7) /* Interrupt Request */ -#define PWMC_IRQEN (0x01<< 6) /* Interrupt Request Enable */ -#define PWMC_FIFOAV (0x01<< 5) /* FIFO Available */ -#define PWMC_EN (0x01<< 4) /* Enables/Disables the PWM */ -#define PWMC_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */ -#define PWMC_CLKSEL(x) (((x) & 0x03) << 0) /* Clock Selection */ - -#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */ -#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */ -#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */ - -/* - * DMA Controller - */ -#define DCR __REG(IMX_DMAC_BASE +0x00) /* DMA Control Register */ -#define DISR __REG(IMX_DMAC_BASE +0x04) /* DMA Interrupt status Register */ -#define DIMR __REG(IMX_DMAC_BASE +0x08) /* DMA Interrupt mask Register */ -#define DBTOSR __REG(IMX_DMAC_BASE +0x0c) /* DMA Burst timeout status Register */ -#define DRTOSR __REG(IMX_DMAC_BASE +0x10) /* DMA Request timeout Register */ -#define DSESR __REG(IMX_DMAC_BASE +0x14) /* DMA Transfer Error Status Register */ -#define DBOSR __REG(IMX_DMAC_BASE +0x18) /* DMA Buffer overflow status Register */ -#define DBTOCR __REG(IMX_DMAC_BASE +0x1c) /* DMA Burst timeout control Register */ -#define WSRA __REG(IMX_DMAC_BASE +0x40) /* W-Size Register A */ -#define XSRA __REG(IMX_DMAC_BASE +0x44) /* X-Size Register A */ -#define YSRA __REG(IMX_DMAC_BASE +0x48) /* Y-Size Register A */ -#define WSRB __REG(IMX_DMAC_BASE +0x4c) /* W-Size Register B */ -#define XSRB __REG(IMX_DMAC_BASE +0x50) /* X-Size Register B */ -#define YSRB __REG(IMX_DMAC_BASE +0x54) /* Y-Size Register B */ -#define SAR(x) __REG2( IMX_DMAC_BASE + 0x80, (x) << 6) /* Source Address Registers */ -#define DAR(x) __REG2( IMX_DMAC_BASE + 0x84, (x) << 6) /* Destination Address Registers */ -#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6) /* Count Registers */ -#define CCR(x) __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6) /* Control Registers */ -#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6) /* Request source select Registers */ -#define BLR(x) __REG2( IMX_DMAC_BASE + 0x94, (x) << 6) /* Burst length Registers */ -#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Request timeout Registers */ -#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Bus Utilization Registers */ - -/* TODO: define DMA_REQ lines */ - -#define DCR_DRST (1<<1) -#define DCR_DEN (1<<0) -#define DBTOCR_EN (1<<15) -#define DBTOCR_CNT(x) ((x) & 0x7fff ) -#define CNTR_CNT(x) ((x) & 0xffffff ) -#define CCR_DMOD_LINEAR ( 0x0 << 12 ) -#define CCR_DMOD_2D ( 0x1 << 12 ) -#define CCR_DMOD_FIFO ( 0x2 << 12 ) -#define CCR_DMOD_EOBFIFO ( 0x3 << 12 ) -#define CCR_SMOD_LINEAR ( 0x0 << 10 ) -#define CCR_SMOD_2D ( 0x1 << 10 ) -#define CCR_SMOD_FIFO ( 0x2 << 10 ) -#define CCR_SMOD_EOBFIFO ( 0x3 << 10 ) -#define CCR_MDIR_DEC (1<<9) -#define CCR_MSEL_B (1<<8) -#define CCR_DSIZ_32 ( 0x0 << 6 ) -#define CCR_DSIZ_8 ( 0x1 << 6 ) -#define CCR_DSIZ_16 ( 0x2 << 6 ) -#define CCR_SSIZ_32 ( 0x0 << 4 ) -#define CCR_SSIZ_8 ( 0x1 << 4 ) -#define CCR_SSIZ_16 ( 0x2 << 4 ) -#define CCR_REN (1<<3) -#define CCR_RPT (1<<2) -#define CCR_FRC (1<<1) -#define CCR_CEN (1<<0) -#define RTOR_EN (1<<15) -#define RTOR_CLK (1<<14) -#define RTOR_PSC (1<<13) - -/* - * LCD Controller - */ - -#define LCDC_SSA __REG(IMX_LCDC_BASE+0x00) - -#define LCDC_SIZE __REG(IMX_LCDC_BASE+0x04) -#define SIZE_XMAX(x) ((((x) >> 4) & 0x3f) << 20) -#define SIZE_YMAX(y) ( (y) & 0x1ff ) - -#define LCDC_VPW __REG(IMX_LCDC_BASE+0x08) -#define VPW_VPW(x) ( (x) & 0x3ff ) - -#define LCDC_CPOS __REG(IMX_LCDC_BASE+0x0C) -#define CPOS_CC1 (1<<31) -#define CPOS_CC0 (1<<30) -#define CPOS_OP (1<<28) -#define CPOS_CXP(x) (((x) & 3ff) << 16) -#define CPOS_CYP(y) ((y) & 0x1ff) - -#define LCDC_LCWHB __REG(IMX_LCDC_BASE+0x10) -#define LCWHB_BK_EN (1<<31) -#define LCWHB_CW(w) (((w) & 0x1f) << 24) -#define LCWHB_CH(h) (((h) & 0x1f) << 16) -#define LCWHB_BD(x) ((x) & 0xff) - -#define LCDC_LCHCC __REG(IMX_LCDC_BASE+0x14) -#define LCHCC_CUR_COL_R(r) (((r) & 0x1f) << 11) -#define LCHCC_CUR_COL_G(g) (((g) & 0x3f) << 5) -#define LCHCC_CUR_COL_B(b) ((b) & 0x1f) - -#define LCDC_PCR __REG(IMX_LCDC_BASE+0x18) -#define PCR_TFT (1<<31) -#define PCR_COLOR (1<<30) -#define PCR_PBSIZ_1 (0<<28) -#define PCR_PBSIZ_2 (1<<28) -#define PCR_PBSIZ_4 (2<<28) -#define PCR_PBSIZ_8 (3<<28) -#define PCR_BPIX_1 (0<<25) -#define PCR_BPIX_2 (1<<25) -#define PCR_BPIX_4 (2<<25) -#define PCR_BPIX_8 (3<<25) -#define PCR_BPIX_12 (4<<25) -#define PCR_BPIX_16 (4<<25) -#define PCR_PIXPOL (1<<24) -#define PCR_FLMPOL (1<<23) -#define PCR_LPPOL (1<<22) -#define PCR_CLKPOL (1<<21) -#define PCR_OEPOL (1<<20) -#define PCR_SCLKIDLE (1<<19) -#define PCR_END_SEL (1<<18) -#define PCR_END_BYTE_SWAP (1<<17) -#define PCR_REV_VS (1<<16) -#define PCR_ACD_SEL (1<<15) -#define PCR_ACD(x) (((x) & 0x7f) << 8) -#define PCR_SCLK_SEL (1<<7) -#define PCR_SHARP (1<<6) -#define PCR_PCD(x) ((x) & 0x3f) - -#define LCDC_HCR __REG(IMX_LCDC_BASE+0x1C) -#define HCR_H_WIDTH(x) (((x) & 0x3f) << 26) -#define HCR_H_WAIT_1(x) (((x) & 0xff) << 8) -#define HCR_H_WAIT_2(x) ((x) & 0xff) - -#define LCDC_VCR __REG(IMX_LCDC_BASE+0x20) -#define VCR_V_WIDTH(x) (((x) & 0x3f) << 26) -#define VCR_V_WAIT_1(x) (((x) & 0xff) << 8) -#define VCR_V_WAIT_2(x) ((x) & 0xff) - -#define LCDC_POS __REG(IMX_LCDC_BASE+0x24) -#define POS_POS(x) ((x) & 1f) - -#define LCDC_LSCR1 __REG(IMX_LCDC_BASE+0x28) -#define LSCR1_PS_RISE_DELAY(x) (((x) & 0x7f) << 26) -#define LSCR1_CLS_RISE_DELAY(x) (((x) & 0x3f) << 16) -#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8) -#define LSCR1_GRAY2(x) (((x) & 0xf) << 4) -#define LSCR1_GRAY1(x) (((x) & 0xf)) - -#define LCDC_PWMR __REG(IMX_LCDC_BASE+0x2C) -#define PWMR_CLS(x) (((x) & 0x1ff) << 16) -#define PWMR_LDMSK (1<<15) -#define PWMR_SCR1 (1<<10) -#define PWMR_SCR0 (1<<9) -#define PWMR_CC_EN (1<<8) -#define PWMR_PW(x) ((x) & 0xff) - -#define LCDC_DMACR __REG(IMX_LCDC_BASE+0x30) -#define DMACR_BURST (1<<31) -#define DMACR_HM(x) (((x) & 0xf) << 16) -#define DMACR_TM(x) ((x) &0xf) - -#define LCDC_RMCR __REG(IMX_LCDC_BASE+0x34) -#define RMCR_LCDC_EN (1<<1) -#define RMCR_SELF_REF (1<<0) - -#define LCDC_LCDICR __REG(IMX_LCDC_BASE+0x38) -#define LCDICR_INT_SYN (1<<2) -#define LCDICR_INT_CON (1) - -#define LCDC_LCDISR __REG(IMX_LCDC_BASE+0x40) -#define LCDISR_UDR_ERR (1<<3) -#define LCDISR_ERR_RES (1<<2) -#define LCDISR_EOF (1<<1) -#define LCDISR_BOF (1<<0) -/* - * UART Module - */ -#define URXD0(x) __REG2( IMX_UART1_BASE + 0x0, ((x) & 1) << 12) /* Receiver Register */ -#define URTX0(x) __REG2( IMX_UART1_BASE + 0x40, ((x) & 1) << 12) /* Transmitter Register */ -#define UCR1(x) __REG2( IMX_UART1_BASE + 0x80, ((x) & 1) << 12) /* Control Register 1 */ -#define UCR2(x) __REG2( IMX_UART1_BASE + 0x84, ((x) & 1) << 12) /* Control Register 2 */ -#define UCR3(x) __REG2( IMX_UART1_BASE + 0x88, ((x) & 1) << 12) /* Control Register 3 */ -#define UCR4(x) __REG2( IMX_UART1_BASE + 0x8c, ((x) & 1) << 12) /* Control Register 4 */ -#define UFCR(x) __REG2( IMX_UART1_BASE + 0x90, ((x) & 1) << 12) /* FIFO Control Register */ -#define USR1(x) __REG2( IMX_UART1_BASE + 0x94, ((x) & 1) << 12) /* Status Register 1 */ -#define USR2(x) __REG2( IMX_UART1_BASE + 0x98, ((x) & 1) << 12) /* Status Register 2 */ -#define UESC(x) __REG2( IMX_UART1_BASE + 0x9c, ((x) & 1) << 12) /* Escape Character Register */ -#define UTIM(x) __REG2( IMX_UART1_BASE + 0xa0, ((x) & 1) << 12) /* Escape Timer Register */ -#define UBIR(x) __REG2( IMX_UART1_BASE + 0xa4, ((x) & 1) << 12) /* BRM Incremental Register */ -#define UBMR(x) __REG2( IMX_UART1_BASE + 0xa8, ((x) & 1) << 12) /* BRM Modulator Register */ -#define UBRC(x) __REG2( IMX_UART1_BASE + 0xac, ((x) & 1) << 12) /* Baud Rate Count Register */ -#define BIPR1(x) __REG2( IMX_UART1_BASE + 0xb0, ((x) & 1) << 12) /* Incremental Preset Register 1 */ -#define BIPR2(x) __REG2( IMX_UART1_BASE + 0xb4, ((x) & 1) << 12) /* Incremental Preset Register 2 */ -#define BIPR3(x) __REG2( IMX_UART1_BASE + 0xb8, ((x) & 1) << 12) /* Incremental Preset Register 3 */ -#define BIPR4(x) __REG2( IMX_UART1_BASE + 0xbc, ((x) & 1) << 12) /* Incremental Preset Register 4 */ -#define BMPR1(x) __REG2( IMX_UART1_BASE + 0xc0, ((x) & 1) << 12) /* BRM Modulator Register 1 */ -#define BMPR2(x) __REG2( IMX_UART1_BASE + 0xc4, ((x) & 1) << 12) /* BRM Modulator Register 2 */ -#define BMPR3(x) __REG2( IMX_UART1_BASE + 0xc8, ((x) & 1) << 12) /* BRM Modulator Register 3 */ -#define BMPR4(x) __REG2( IMX_UART1_BASE + 0xcc, ((x) & 1) << 12) /* BRM Modulator Register 4 */ -#define UTS(x) __REG2( IMX_UART1_BASE + 0xd0, ((x) & 1) << 12) /* UART Test Register */ - -/* UART Control Register Bit Fields.*/ -#define URXD_CHARRDY (1<<15) -#define URXD_ERR (1<<14) -#define URXD_OVRRUN (1<<13) -#define URXD_FRMERR (1<<12) -#define URXD_BRK (1<<11) -#define URXD_PRERR (1<<10) -#define UCR1_ADEN (1<<15) /* Auto dectect interrupt */ -#define UCR1_ADBR (1<<14) /* Auto detect baud rate */ -#define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */ -#define UCR1_IDEN (1<<12) /* Idle condition interrupt */ -#define UCR1_RRDYEN (1<<9) /* Recv ready interrupt enable */ -#define UCR1_RDMAEN (1<<8) /* Recv ready DMA enable */ -#define UCR1_IREN (1<<7) /* Infrared interface enable */ -#define UCR1_TXMPTYEN (1<<6) /* Transimitter empty interrupt enable */ -#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */ -#define UCR1_SNDBRK (1<<4) /* Send break */ -#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */ -#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */ -#define UCR1_DOZE (1<<1) /* Doze */ -#define UCR1_UARTEN (1<<0) /* UART enabled */ -#define UCR2_ESCI (1<<15) /* Escape seq interrupt enable */ -#define UCR2_IRTS (1<<14) /* Ignore RTS pin */ -#define UCR2_CTSC (1<<13) /* CTS pin control */ -#define UCR2_CTS (1<<12) /* Clear to send */ -#define UCR2_ESCEN (1<<11) /* Escape enable */ -#define UCR2_PREN (1<<8) /* Parity enable */ -#define UCR2_PROE (1<<7) /* Parity odd/even */ -#define UCR2_STPB (1<<6) /* Stop */ -#define UCR2_WS (1<<5) /* Word size */ -#define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */ -#define UCR2_TXEN (1<<2) /* Transmitter enabled */ -#define UCR2_RXEN (1<<1) /* Receiver enabled */ -#define UCR2_SRST (1<<0) /* SW reset */ -#define UCR3_DTREN (1<<13) /* DTR interrupt enable */ -#define UCR3_PARERREN (1<<12) /* Parity enable */ -#define UCR3_FRAERREN (1<<11) /* Frame error interrupt enable */ -#define UCR3_DSR (1<<10) /* Data set ready */ -#define UCR3_DCD (1<<9) /* Data carrier detect */ -#define UCR3_RI (1<<8) /* Ring indicator */ -#define UCR3_TIMEOUTEN (1<<7) /* Timeout interrupt enable */ -#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */ -#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */ -#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */ -#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz */ -#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz */ -#define UCR3_INVT (1<<1) /* Inverted Infrared transmission */ -#define UCR3_BPEN (1<<0) /* Preset registers enable */ -#define UCR4_CTSTL_32 (32<<10) /* CTS trigger level (32 chars) */ -#define UCR4_INVR (1<<9) /* Inverted infrared reception */ -#define UCR4_ENIRI (1<<8) /* Serial infrared interrupt enable */ -#define UCR4_WKEN (1<<7) /* Wake interrupt enable */ -#define UCR4_REF16 (1<<6) /* Ref freq 16 MHz */ -#define UCR4_IRSC (1<<5) /* IR special case */ -#define UCR4_TCEN (1<<3) /* Transmit complete interrupt enable */ -#define UCR4_BKEN (1<<2) /* Break condition interrupt enable */ -#define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */ -#define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */ -#define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */ -#define UFCR_RFDIV (7<<7) /* Reference freq divider mask */ -#define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */ -#define USR1_PARITYERR (1<<15) /* Parity error interrupt flag */ -#define USR1_RTSS (1<<14) /* RTS pin status */ -#define USR1_TRDY (1<<13) /* Transmitter ready interrupt/dma flag */ -#define USR1_RTSD (1<<12) /* RTS delta */ -#define USR1_ESCF (1<<11) /* Escape seq interrupt flag */ -#define USR1_FRAMERR (1<<10) /* Frame error interrupt flag */ -#define USR1_RRDY (1<<9) /* Receiver ready interrupt/dma flag */ -#define USR1_TIMEOUT (1<<7) /* Receive timeout interrupt status */ -#define USR1_RXDS (1<<6) /* Receiver idle interrupt flag */ -#define USR1_AIRINT (1<<5) /* Async IR wake interrupt flag */ -#define USR1_AWAKE (1<<4) /* Aysnc wake interrupt flag */ -#define USR2_ADET (1<<15) /* Auto baud rate detect complete */ -#define USR2_TXFE (1<<14) /* Transmit buffer FIFO empty */ -#define USR2_DTRF (1<<13) /* DTR edge interrupt flag */ -#define USR2_IDLE (1<<12) /* Idle condition */ -#define USR2_IRINT (1<<8) /* Serial infrared interrupt flag */ -#define USR2_WAKE (1<<7) /* Wake */ -#define USR2_RTSF (1<<4) /* RTS edge interrupt flag */ -#define USR2_TXDC (1<<3) /* Transmitter complete */ -#define USR2_BRCD (1<<2) /* Break condition */ -#define USR2_ORE (1<<1) /* Overrun error */ -#define USR2_RDR (1<<0) /* Recv data ready */ -#define UTS_FRCPERR (1<<13) /* Force parity error */ -#define UTS_LOOP (1<<12) /* Loop tx and rx */ -#define UTS_TXEMPTY (1<<6) /* TxFIFO empty */ -#define UTS_RXEMPTY (1<<5) /* RxFIFO empty */ -#define UTS_TXFULL (1<<4) /* TxFIFO full */ -#define UTS_RXFULL (1<<3) /* RxFIFO full */ -#define UTS_SOFTRST (1<<0) /* Software reset */ - -/* General purpose timers registers */ -#define TCTL1 __REG(IMX_TIM1_BASE) -#define TPRER1 __REG(IMX_TIM1_BASE + 0x4) -#define TCMP1 __REG(IMX_TIM1_BASE + 0x8) -#define TCR1 __REG(IMX_TIM1_BASE + 0xc) -#define TCN1 __REG(IMX_TIM1_BASE + 0x10) -#define TSTAT1 __REG(IMX_TIM1_BASE + 0x14) -#define TCTL2 __REG(IMX_TIM2_BASE) -#define TPRER2 __REG(IMX_TIM2_BASE + 0x4) -#define TCMP2 __REG(IMX_TIM2_BASE + 0x8) -#define TCR2 __REG(IMX_TIM2_BASE + 0xc) -#define TCN2 __REG(IMX_TIM2_BASE + 0x10) -#define TSTAT2 __REG(IMX_TIM2_BASE + 0x14) - -/* General purpose timers bitfields */ -#define TCTL_SWR (1<<15) /* Software reset */ -#define TCTL_FRR (1<<8) /* Freerun / restart */ -#define TCTL_CAP (3<<6) /* Capture Edge */ -#define TCTL_OM (1<<5) /* output mode */ -#define TCTL_IRQEN (1<<4) /* interrupt enable */ -#define TCTL_CLKSOURCE (7<<1) /* Clock source */ -#define TCTL_TEN (1) /* Timer enable */ -#define TPRER_PRES (0xff) /* Prescale */ -#define TSTAT_CAPT (1<<1) /* Capture event */ -#define TSTAT_COMP (1) /* Compare event */ - -#endif /* _IMX_REGS_H */ diff --git a/arch/arm/include/asm/arch-imx8/imx-regs.h b/arch/arm/include/asm/arch-imx8/imx-regs.h index af0fb5154b6..6333ff4686f 100644 --- a/arch/arm/include/asm/arch-imx8/imx-regs.h +++ b/arch/arm/include/asm/arch-imx8/imx-regs.h @@ -6,6 +6,8 @@ #ifndef __ASM_ARCH_IMX8_REGS_H__ #define __ASM_ARCH_IMX8_REGS_H__ +#define ARCH_MXC + #define LPUART_BASE 0x5A060000 #define GPT1_BASE_ADDR 0x5D140000 diff --git a/arch/arm/include/asm/arch-imx8m/imx-regs.h b/arch/arm/include/asm/arch-imx8m/imx-regs.h index 3facd5450c0..68666a535b9 100644 --- a/arch/arm/include/asm/arch-imx8m/imx-regs.h +++ b/arch/arm/include/asm/arch-imx8m/imx-regs.h @@ -6,6 +6,8 @@ #ifndef __ASM_ARCH_IMX8M_REGS_H__ #define __ASM_ARCH_IMX8M_REGS_H__ +#define ARCH_MXC + #include <asm/mach-imx/regs-lcdif.h> #define ROM_VERSION_A0 0x800 diff --git a/arch/arm/include/asm/arch-mx7/clock.h b/arch/arm/include/asm/arch-mx7/clock.h index f56564ea6fc..1d07fde5432 100644 --- a/arch/arm/include/asm/arch-mx7/clock.h +++ b/arch/arm/include/asm/arch-mx7/clock.h @@ -175,6 +175,24 @@ enum clk_root_index { CLK_ROOT_MAX, }; +#if (CONFIG_CONS_INDEX == 0) +#define UART_CLK_ROOT UART1_CLK_ROOT +#elif (CONFIG_CONS_INDEX == 1) +#define UART_CLK_ROOT UART2_CLK_ROOT +#elif (CONFIG_CONS_INDEX == 2) +#define UART_CLK_ROOT UART3_CLK_ROOT +#elif (CONFIG_CONS_INDEX == 3) +#define UART_CLK_ROOT UART4_CLK_ROOT +#elif (CONFIG_CONS_INDEX == 4) +#define UART_CLK_ROOT UART5_CLK_ROOT +#elif (CONFIG_CONS_INDEX == 5) +#define UART_CLK_ROOT UART6_CLK_ROOT +#elif (CONFIG_CONS_INDEX == 6) +#define UART_CLK_ROOT UART7_CLK_ROOT +#else +#error "Invalid IMX UART ID for serial console is defined" +#endif + struct clk_root_setting { enum clk_root_index root; u32 setting; diff --git a/arch/arm/include/asm/arch-mx7ulp/imx-regs.h b/arch/arm/include/asm/arch-mx7ulp/imx-regs.h index bf9f39aca23..63b02de0878 100644 --- a/arch/arm/include/asm/arch-mx7ulp/imx-regs.h +++ b/arch/arm/include/asm/arch-mx7ulp/imx-regs.h @@ -8,6 +8,8 @@ #include <linux/sizes.h> +#define ARCH_MXC + #define CAAM_SEC_SRAM_BASE (0x26000000) #define CAAM_SEC_SRAM_SIZE (SZ_32K) #define CAAM_SEC_SRAM_END (CAAM_SEC_SRAM_BASE + CAAM_SEC_SRAM_SIZE - 1) diff --git a/arch/arm/include/asm/arch-mx7ulp/mx7ulp_plugin.S b/arch/arm/include/asm/arch-mx7ulp/mx7ulp_plugin.S new file mode 100644 index 00000000000..bcc804b58fa --- /dev/null +++ b/arch/arm/include/asm/arch-mx7ulp/mx7ulp_plugin.S @@ -0,0 +1,93 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2019 NXP + */ + +#include <config.h> + +#define ROM_API_TABLE_BASE_ADDR_LEGACY 0x180 +#define ROM_VERSION_OFFSET 0x80 +#define ROM_API_HWCNFG_SETUP_OFFSET 0x08 + +plugin_start: + + push {r0-r4, lr} + + imx7ulp_ddr_setting + imx7ulp_clock_gating + imx7ulp_qos_setting + +normal_boot: + +/* + * The following is to fill in those arguments for this ROM function + * pu_irom_hwcnfg_setup(void **start, size_t *bytes, const void *boot_data) + * This function is used to copy data from the storage media into DDR. + * start - Initial (possibly partial) image load address on entry. + * Final image load address on exit. + * bytes - Initial (possibly partial) image size on entry. + * Final image size on exit. + * boot_data - Initial @ref ivt Boot Data load address. + */ + adr r0, boot_data2 + adr r1, image_len2 + adr r2, boot_data2 + +/* + * check the _pu_irom_api_table for the address + */ +before_calling_rom___pu_irom_hwcnfg_setup: + ldr r3, =ROM_VERSION_OFFSET + ldr r4, [r3] + ldr r3, =ROM_API_TABLE_BASE_ADDR_LEGACY + ldr r4, [r3, #ROM_API_HWCNFG_SETUP_OFFSET] + blx r4 +after_calling_rom___pu_irom_hwcnfg_setup: + +/* + * To return to ROM from plugin, we need to fill in these argument. + * Here is what need to do: + * Need to construct the parameters for this function before return to ROM: + * plugin_download(void **start, size_t *bytes, UINT32 *ivt_offset) + */ + pop {r0-r4, lr} + push {r5} + ldr r5, boot_data2 + str r5, [r0] + ldr r5, image_len2 + str r5, [r1] + ldr r5, second_ivt_offset + str r5, [r2] + mov r0, #1 + pop {r5} + + /* return back to ROM code */ + bx lr + +/* make the following data right in the end of the output*/ +.ltorg + +#define FLASH_OFFSET 0x400 + +/* + * second_ivt_offset is the offset from the "second_ivt_header" to + * "image_copy_start", which involves FLASH_OFFSET, plus the first + * ivt_header, the plugin code size itself recorded by "ivt2_header" + */ + +second_ivt_offset: .long (ivt2_header + 0x2C + FLASH_OFFSET) + +/* + * The following is the second IVT header plus the second boot data + */ +ivt2_header: .long 0x0 +app2_code_jump_v: .long 0x0 +reserv3: .long 0x0 +dcd2_ptr: .long 0x0 +boot_data2_ptr: .long 0x0 +self_ptr2: .long 0x0 +app_code_csf2: .long 0x0 +reserv4: .long 0x0 +boot_data2: .long 0x0 +image_len2: .long 0x0 +plugin2: .long 0x0 diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index ec09ef240fe..b6fd1595f04 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -29,7 +29,7 @@ config IMX_BOOTAUX config USE_IMXIMG_PLUGIN bool "Use imximage plugin code" - depends on ARCH_MX7 || ARCH_MX6 + depends on ARCH_MX7 || ARCH_MX6 || ARCH_MX7ULP help i.MX6/7 supports DCD and Plugin. Enable this configuration to use Plugin, otherwise DCD will be used. diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index c46984994a1..898478fc4a4 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -92,7 +92,9 @@ IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%) ifeq ($(CONFIG_ARCH_IMX8), y) CNTR_DEPFILES := $(srctree)/tools/imx_cntr_image.sh IMAGE_TYPE := imx8image +ifeq ($(CONFIG_SPL_BUILD),y) SPL_DEPFILE_EXISTS := $(shell $(CPP) $(cpp_flags) -x c -o spl/u-boot-spl.cfgout $(srctree)/$(IMX_CONFIG); if [ -f spl/u-boot-spl.cfgout ]; then $(CNTR_DEPFILES) spl/u-boot-spl.cfgout; echo $$?; fi) +endif DEPFILE_EXISTS := $(shell $(CPP) $(cpp_flags) -x c -o u-boot-dtb.cfgout $(srctree)/$(IMX_CONFIG); if [ -f u-boot-dtb.cfgout ]; then $(CNTR_DEPFILES) u-boot-dtb.cfgout; echo $$?; fi) else ifeq ($(CONFIG_ARCH_IMX8M), y) IMAGE_TYPE := imx8mimage @@ -110,7 +112,16 @@ u-boot.imx: MKIMAGEOUTPUT = u-boot.imx.log u-boot.imx: u-boot.bin u-boot.cfgout $(PLUGIN).bin FORCE $(call if_changed,mkimage) -ifeq ($(CONFIG_OF_SEPARATE),y) +ifeq ($(CONFIG_MULTI_DTB_FIT),y) +MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \ + -T $(IMAGE_TYPE) -e $(CONFIG_SYS_TEXT_BASE) +u-boot-dtb.imx: MKIMAGEOUTPUT = u-boot-dtb.imx.log + +u-boot-dtb.imx: u-boot-fit-dtb.bin u-boot-dtb.cfgout $(PLUGIN).bin FORCE +ifeq ($(DEPFILE_EXISTS),0) + $(call if_changed,mkimage) +endif +else ifeq ($(CONFIG_OF_SEPARATE),y) MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) \ -T $(IMAGE_TYPE) -e $(CONFIG_SYS_TEXT_BASE) u-boot-dtb.imx: MKIMAGEOUTPUT = u-boot-dtb.imx.log diff --git a/arch/arm/mach-imx/cpu.c b/arch/arm/mach-imx/cpu.c index 64a0670fcf6..d62ff6ef25d 100644 --- a/arch/arm/mach-imx/cpu.c +++ b/arch/arm/mach-imx/cpu.c @@ -285,7 +285,7 @@ u32 get_ahb_clk(void) void arch_preboot_os(void) { -#if defined(CONFIG_PCIE_IMX) +#if defined(CONFIG_PCIE_IMX) && !CONFIG_IS_ENABLED(DM_PCI) imx_pcie_remove(); #endif #if defined(CONFIG_SATA) diff --git a/arch/arm/mach-imx/imx8/Kconfig b/arch/arm/mach-imx/imx8/Kconfig index c32f7dbb61e..bbe323d5ca4 100644 --- a/arch/arm/mach-imx/imx8/Kconfig +++ b/arch/arm/mach-imx/imx8/Kconfig @@ -27,8 +27,13 @@ choice prompt "i.MX8 board select" optional -config TARGET_IMX8QXP_MEK - bool "Support i.MX8QXP MEK board" +config TARGET_APALIS_IMX8 + bool "Support Apalis iMX8 module" + select BOARD_LATE_INIT + select IMX8QM + +config TARGET_COLIBRI_IMX8X + bool "Support Colibri iMX8X module" select BOARD_LATE_INIT select IMX8QXP @@ -37,9 +42,16 @@ config TARGET_IMX8QM_MEK select BOARD_LATE_INIT select IMX8QM +config TARGET_IMX8QXP_MEK + bool "Support i.MX8QXP MEK board" + select BOARD_LATE_INIT + select IMX8QXP + endchoice -source "board/freescale/imx8qxp_mek/Kconfig" source "board/freescale/imx8qm_mek/Kconfig" +source "board/freescale/imx8qxp_mek/Kconfig" +source "board/toradex/apalis-imx8/Kconfig" +source "board/toradex/colibri-imx8x/Kconfig" endif diff --git a/arch/arm/mach-imx/imx8/cpu.c b/arch/arm/mach-imx/imx8/cpu.c index 53f9a8735ad..f2fa262ac89 100644 --- a/arch/arm/mach-imx/imx8/cpu.c +++ b/arch/arm/mach-imx/imx8/cpu.c @@ -11,6 +11,7 @@ #include <dm/lists.h> #include <dm/uclass.h> #include <errno.h> +#include <thermal.h> #include <asm/arch/sci/sci.h> #include <asm/arch/sys_proto.h> #include <asm/arch-imx/cpu.h> @@ -573,15 +574,50 @@ const char *get_core_name(void) return "?"; } +#if IS_ENABLED(CONFIG_IMX_SCU_THERMAL) +static int cpu_imx_get_temp(void) +{ + struct udevice *thermal_dev; + int cpu_tmp, ret; + + ret = uclass_get_device_by_name(UCLASS_THERMAL, "cpu-thermal0", + &thermal_dev); + + if (!ret) { + ret = thermal_get_temp(thermal_dev, &cpu_tmp); + if (ret) + return 0xdeadbeef; + } else { + return 0xdeadbeef; + } + + return cpu_tmp; +} +#else +static int cpu_imx_get_temp(void) +{ + return 0; +} +#endif + int cpu_imx_get_desc(struct udevice *dev, char *buf, int size) { struct cpu_imx_platdata *plat = dev_get_platdata(dev); + int ret; if (size < 100) return -ENOSPC; - snprintf(buf, size, "NXP i.MX8%s Rev%s %s at %u MHz\n", - plat->type, plat->rev, plat->name, plat->freq_mhz); + ret = snprintf(buf, size, "NXP i.MX8%s Rev%s %s at %u MHz", + plat->type, plat->rev, plat->name, plat->freq_mhz); + + if (IS_ENABLED(CONFIG_IMX_SCU_THERMAL)) { + buf = buf + ret; + size = size - ret; + ret = snprintf(buf, size, " at %dC", cpu_imx_get_temp()); + } + + snprintf(buf + ret, size - ret, "\n"); return 0; } @@ -623,8 +659,10 @@ static ulong imx8_get_cpu_rate(void) { ulong rate; int ret; + int type = is_cortex_a35() ? SC_R_A35 : is_cortex_a53() ? + SC_R_A53 : SC_R_A72; - ret = sc_pm_get_clock_rate(-1, SC_R_A35, SC_PM_CLK_CPU, + ret = sc_pm_get_clock_rate(-1, type, SC_PM_CLK_CPU, (sc_pm_clock_rate_t *)&rate); if (ret) { printf("Could not read CPU frequency: %d\n", ret); diff --git a/arch/arm/mach-imx/mx6/Kconfig b/arch/arm/mach-imx/mx6/Kconfig index f513c4c06f7..fe5991e7c6d 100644 --- a/arch/arm/mach-imx/mx6/Kconfig +++ b/arch/arm/mach-imx/mx6/Kconfig @@ -455,6 +455,18 @@ config TARGET_PCL063 select DM_THERMAL select SUPPORT_SPL +config TARGET_PCL063_ULL + bool "PHYTEC PCL063 (phyCORE-i.MX6ULL)" + select MX6ULL + select DM + select DM_ETH + select DM_GPIO + select DM_I2C + select DM_MMC + select DM_SERIAL + select DM_THERMAL + select SUPPORT_SPL + config TARGET_SECOMX6 bool "secomx6 boards" @@ -498,8 +510,8 @@ config TARGET_UDOO_NEO select SUPPORT_SPL imply CMD_DM -config TARGET_SAMTEC_VINING_2000 - bool "samtec VIN|ING 2000" +config TARGET_SOFTING_VINING_2000 + bool "Softing VIN|ING 2000" select BOARD_LATE_INIT select DM select DM_THERMAL @@ -580,7 +592,7 @@ source "board/phytec/pfla02/Kconfig" source "board/phytec/pcl063/Kconfig" source "board/gateworks/gw_ventana/Kconfig" source "board/kosagi/novena/Kconfig" -source "board/samtec/vining_2000/Kconfig" +source "board/softing/vining_2000/Kconfig" source "board/liebherr/display5/Kconfig" source "board/liebherr/mccmon6/Kconfig" source "board/logicpd/imx6/Kconfig" diff --git a/arch/arm/mach-imx/mx6/opos6ul.c b/arch/arm/mach-imx/mx6/opos6ul.c index 94a3d712017..264fa8a48e3 100644 --- a/arch/arm/mach-imx/mx6/opos6ul.c +++ b/arch/arm/mach-imx/mx6/opos6ul.c @@ -192,6 +192,8 @@ struct mx6_ddr_sysinfo ddr_sysinfo = { .sde_to_rst = 0x10, /* 14 cycles, 200us (JEDEC default) */ .rst_to_cke = 0x23, /* 33 cycles, 500us (JEDEC default) */ .ddr_type = DDR_TYPE_DDR3, + .refsel = 1, /* Refresh cycles at 32KHz */ + .refr = 7, /* 8 refreshes commands per refresh cycle */ }; static struct mx6_ddr3_cfg mem_ddr = { diff --git a/arch/arm/mach-imx/mx7/clock.c b/arch/arm/mach-imx/mx7/clock.c index 8cda71cf55b..e364b162d92 100644 --- a/arch/arm/mach-imx/mx7/clock.c +++ b/arch/arm/mach-imx/mx7/clock.c @@ -53,7 +53,7 @@ static u32 get_ipg_clk(void) u32 imx_get_uartclk(void) { - return get_root_clk(UART1_CLK_ROOT); + return get_root_clk(UART_CLK_ROOT); } u32 imx_get_fecclk(void) diff --git a/arch/arm/mach-imx/mx7/soc.c b/arch/arm/mach-imx/mx7/soc.c index 4a914fca5e5..1b4bbc50373 100644 --- a/arch/arm/mach-imx/mx7/soc.c +++ b/arch/arm/mach-imx/mx7/soc.c @@ -164,15 +164,6 @@ u32 __weak get_board_rev(void) } #endif -#ifndef CONFIG_SKIP_LOWLEVEL_INIT -/* enable all periherial can be accessed in nosec mode */ -static void init_csu(void) -{ - int i = 0; - for (i = 0; i < CSU_NUM_REGS; i++) - writel(CSU_INIT_SEC_LEVEL0, CSU_IPS_BASE_ADDR + i * 4); -} - static void imx_enet_mdio_fixup(void) { struct iomuxc_gpr_base_regs *gpr_regs = @@ -191,6 +182,26 @@ static void imx_enet_mdio_fixup(void) } } +static void init_cpu_basic(void) +{ + imx_enet_mdio_fixup(); + +#ifdef CONFIG_APBH_DMA + /* Start APBH DMA */ + mxs_dma_init(); +#endif +} + +#ifndef CONFIG_SKIP_LOWLEVEL_INIT +/* enable all periherial can be accessed in nosec mode */ +static void init_csu(void) +{ + int i = 0; + + for (i = 0; i < CSU_NUM_REGS; i++) + writel(CSU_INIT_SEC_LEVEL0, CSU_IPS_BASE_ADDR + i * 4); +} + static void imx_gpcv2_init(void) { u32 val, i; @@ -269,12 +280,7 @@ int arch_cpu_init(void) /* Disable PDE bit of WMCR register */ imx_wdog_disable_powerdown(); - imx_enet_mdio_fixup(); - -#ifdef CONFIG_APBH_DMA - /* Start APBH DMA */ - mxs_dma_init(); -#endif + init_cpu_basic(); #if CONFIG_IS_ENABLED(IMX_RDC) isolate_resource(); @@ -286,6 +292,13 @@ int arch_cpu_init(void) return 0; } +#else +int arch_cpu_init(void) +{ + init_cpu_basic(); + + return 0; +} #endif #ifdef CONFIG_ARCH_MISC_INIT |