diff options
Diffstat (limited to 'board/armadeus')
| -rw-r--r-- | board/armadeus/apf27/Kconfig | 15 | ||||
| -rw-r--r-- | board/armadeus/apf27/MAINTAINERS | 7 | ||||
| -rw-r--r-- | board/armadeus/apf27/Makefile | 12 | ||||
| -rw-r--r-- | board/armadeus/apf27/apf27.c | 259 | ||||
| -rw-r--r-- | board/armadeus/apf27/apf27.h | 488 | ||||
| -rw-r--r-- | board/armadeus/apf27/fpga.c | 226 | ||||
| -rw-r--r-- | board/armadeus/apf27/fpga.h | 24 | ||||
| -rw-r--r-- | board/armadeus/apf27/lowlevel_init.S | 166 |
8 files changed, 0 insertions, 1197 deletions
diff --git a/board/armadeus/apf27/Kconfig b/board/armadeus/apf27/Kconfig deleted file mode 100644 index 65544a84483..00000000000 --- a/board/armadeus/apf27/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_APF27 - -config SYS_BOARD - default "apf27" - -config SYS_VENDOR - default "armadeus" - -config SYS_SOC - default "mx27" - -config SYS_CONFIG_NAME - default "apf27" - -endif diff --git a/board/armadeus/apf27/MAINTAINERS b/board/armadeus/apf27/MAINTAINERS deleted file mode 100644 index 09f0525c51b..00000000000 --- a/board/armadeus/apf27/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -APF27 BOARD -M: Philippe Reynes <tremyfr@yahoo.fr> -M: Eric Jarrige <eric.jarrige@armadeus.org> -S: Maintained -F: board/armadeus/apf27/ -F: include/configs/apf27.h -F: configs/apf27_defconfig diff --git a/board/armadeus/apf27/Makefile b/board/armadeus/apf27/Makefile deleted file mode 100644 index 57129718d5c..00000000000 --- a/board/armadeus/apf27/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# (C) Copyright 2012-2013 -# Eric Jarrige <eric.jarrige@armadeus.org> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := apf27.o -obj-y += lowlevel_init.o -obj-$(CONFIG_FPGA) += fpga.o diff --git a/board/armadeus/apf27/apf27.c b/board/armadeus/apf27/apf27.c deleted file mode 100644 index 5e3fdd36fa2..00000000000 --- a/board/armadeus/apf27/apf27.c +++ /dev/null @@ -1,259 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2008-2013 Eric Jarrige <eric.jarrige@armadeus.org> - * - * based on the files by - * Sascha Hauer, Pengutronix - */ - -#include <common.h> -#include <hang.h> -#include <init.h> -#include <asm/global_data.h> -#include <jffs2/jffs2.h> -#include <nand.h> -#include <netdev.h> -#include <asm/io.h> -#include <asm/arch/imx-regs.h> -#include <asm/arch/gpio.h> -#include <asm/gpio.h> -#include <linux/errno.h> -#include <u-boot/crc.h> -#include "apf27.h" -#include "fpga.h" - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Fuse bank 1 row 8 is "reserved for future use" and therefore available for - * customer use. The APF27 board uses this fuse to store the board revision: - * 0: initial board revision - * 1: first revision - Presence of the second RAM chip on the board is blown in - * fuse bank 1 row 9 bit 0 - No hardware change - * N: to be defined - */ -static u32 get_board_rev(void) -{ - struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE; - - return readl(&iim->bank[1].fuse_regs[8]); -} - -/* - * Fuse bank 1 row 9 is "reserved for future use" and therefore available for - * customer use. The APF27 board revision 1 uses the bit 0 to permanently store - * the presence of the second RAM chip - * 0: AFP27 with 1 RAM of 64 MiB - * 1: AFP27 with 2 RAM chips of 64 MiB each (128MB) - */ -static int get_num_ram_bank(void) -{ - struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE; - int nr_dram_banks = 1; - - if ((get_board_rev() > 0) && (CONFIG_NR_DRAM_BANKS > 1)) - nr_dram_banks += readl(&iim->bank[1].fuse_regs[9]) & 0x01; - else - nr_dram_banks = CONFIG_NR_DRAM_POPULATED; - - return nr_dram_banks; -} - -static void apf27_port_init(int port, u32 gpio_dr, u32 ocr1, u32 ocr2, - u32 iconfa1, u32 iconfa2, u32 iconfb1, u32 iconfb2, - u32 icr1, u32 icr2, u32 imr, u32 gpio_dir, u32 gpr, - u32 puen, u32 gius) -{ - struct gpio_port_regs *regs = (struct gpio_port_regs *)IMX_GPIO_BASE; - - writel(gpio_dr, ®s->port[port].gpio_dr); - writel(ocr1, ®s->port[port].ocr1); - writel(ocr2, ®s->port[port].ocr2); - writel(iconfa1, ®s->port[port].iconfa1); - writel(iconfa2, ®s->port[port].iconfa2); - writel(iconfb1, ®s->port[port].iconfb1); - writel(iconfb2, ®s->port[port].iconfb2); - writel(icr1, ®s->port[port].icr1); - writel(icr2, ®s->port[port].icr2); - writel(imr, ®s->port[port].imr); - writel(gpio_dir, ®s->port[port].gpio_dir); - writel(gpr, ®s->port[port].gpr); - writel(puen, ®s->port[port].puen); - writel(gius, ®s->port[port].gius); -} - -#define APF27_PORT_INIT(n) apf27_port_init(PORT##n, ACFG_DR_##n##_VAL, \ - ACFG_OCR1_##n##_VAL, ACFG_OCR2_##n##_VAL, ACFG_ICFA1_##n##_VAL, \ - ACFG_ICFA2_##n##_VAL, ACFG_ICFB1_##n##_VAL, ACFG_ICFB2_##n##_VAL, \ - ACFG_ICR1_##n##_VAL, ACFG_ICR2_##n##_VAL, ACFG_IMR_##n##_VAL, \ - ACFG_DDIR_##n##_VAL, ACFG_GPR_##n##_VAL, ACFG_PUEN_##n##_VAL, \ - ACFG_GIUS_##n##_VAL) - -static void apf27_iomux_init(void) -{ - APF27_PORT_INIT(A); - APF27_PORT_INIT(B); - APF27_PORT_INIT(C); - APF27_PORT_INIT(D); - APF27_PORT_INIT(E); - APF27_PORT_INIT(F); -} - -static int apf27_devices_init(void) -{ - int i; - unsigned int mode[] = { - PC5_PF_I2C2_DATA, - PC6_PF_I2C2_CLK, - PD17_PF_I2C_DATA, - PD18_PF_I2C_CLK, - }; - - for (i = 0; i < ARRAY_SIZE(mode); i++) - imx_gpio_mode(mode[i]); - -#ifdef CONFIG_MXC_UART - mx27_uart1_init_pins(); -#endif - -#ifdef CONFIG_FEC_MXC - mx27_fec_init_pins(); -#endif - -#ifdef CONFIG_MMC_MXC - mx27_sd2_init_pins(); - imx_gpio_mode((GPIO_PORTF | GPIO_OUT | GPIO_PUEN | GPIO_GPIO | 16)); - gpio_request(PC_PWRON, "pc_pwron"); - gpio_set_value(PC_PWRON, 1); -#endif - return 0; -} - -static void apf27_setup_csx(void) -{ - struct weim_regs *weim = (struct weim_regs *)IMX_WEIM_BASE; - - writel(ACFG_CS0U_VAL, &weim->cs0u); - writel(ACFG_CS0L_VAL, &weim->cs0l); - writel(ACFG_CS0A_VAL, &weim->cs0a); - - writel(ACFG_CS1U_VAL, &weim->cs1u); - writel(ACFG_CS1L_VAL, &weim->cs1l); - writel(ACFG_CS1A_VAL, &weim->cs1a); - - writel(ACFG_CS2U_VAL, &weim->cs2u); - writel(ACFG_CS2L_VAL, &weim->cs2l); - writel(ACFG_CS2A_VAL, &weim->cs2a); - - writel(ACFG_CS3U_VAL, &weim->cs3u); - writel(ACFG_CS3L_VAL, &weim->cs3l); - writel(ACFG_CS3A_VAL, &weim->cs3a); - - writel(ACFG_CS4U_VAL, &weim->cs4u); - writel(ACFG_CS4L_VAL, &weim->cs4l); - writel(ACFG_CS4A_VAL, &weim->cs4a); - - writel(ACFG_CS5U_VAL, &weim->cs5u); - writel(ACFG_CS5L_VAL, &weim->cs5l); - writel(ACFG_CS5A_VAL, &weim->cs5a); - - writel(ACFG_EIM_VAL, &weim->eim); -} - -static void apf27_setup_port(void) -{ - struct system_control_regs *system = - (struct system_control_regs *)IMX_SYSTEM_CTL_BASE; - - writel(ACFG_FMCR_VAL, &system->fmcr); -} - -int board_init(void) -{ - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - apf27_setup_csx(); - apf27_setup_port(); - apf27_iomux_init(); - apf27_devices_init(); -#if defined(CONFIG_FPGA) - APF27_init_fpga(); -#endif - - - return 0; -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); - if (get_num_ram_bank() > 1) - gd->ram_size += get_ram_size((void *)PHYS_SDRAM_2, - PHYS_SDRAM_2_SIZE); - - return 0; -} - -int dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = get_ram_size((void *)PHYS_SDRAM_1, - PHYS_SDRAM_1_SIZE); - gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - if (get_num_ram_bank() > 1) - gd->bd->bi_dram[1].size = get_ram_size((void *)PHYS_SDRAM_2, - PHYS_SDRAM_2_SIZE); - else - gd->bd->bi_dram[1].size = 0; - - return 0; -} - -ulong board_get_usable_ram_top(ulong total_size) -{ - ulong ramtop; - - if (get_num_ram_bank() > 1) - ramtop = PHYS_SDRAM_2 + get_ram_size((void *)PHYS_SDRAM_2, - PHYS_SDRAM_2_SIZE); - else - ramtop = PHYS_SDRAM_1 + get_ram_size((void *)PHYS_SDRAM_1, - PHYS_SDRAM_1_SIZE); - - return ramtop; -} - -int checkboard(void) -{ - printf("Board: Armadeus APF27 revision %d\n", get_board_rev()); - return 0; -} - -#ifdef CONFIG_SPL_BUILD -inline void hang(void) -{ - for (;;) - ; -} - -void board_init_f(ulong bootflag) -{ - /* - * copy ourselves from where we are running to where we were - * linked at. Use ulong pointers as all addresses involved - * are 4-byte-aligned. - */ - ulong *start_ptr, *end_ptr, *link_ptr, *run_ptr, *dst; - asm volatile ("ldr %0, =_start" : "=r"(start_ptr)); - asm volatile ("ldr %0, =_end" : "=r"(end_ptr)); - asm volatile ("ldr %0, =board_init_f" : "=r"(link_ptr)); - asm volatile ("adr %0, board_init_f" : "=r"(run_ptr)); - for (dst = start_ptr; dst < end_ptr; dst++) - *dst = *(dst+(run_ptr-link_ptr)); - - /* - * branch to nand_boot's link-time address. - */ - asm volatile("ldr pc, =nand_boot"); -} -#endif /* CONFIG_SPL_BUILD */ diff --git a/board/armadeus/apf27/apf27.h b/board/armadeus/apf27/apf27.h deleted file mode 100644 index 9c3cfd3cf4b..00000000000 --- a/board/armadeus/apf27/apf27.h +++ /dev/null @@ -1,488 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2008-2013 Eric Jarrige <eric.jarrige@armadeus.org> - */ - -#ifndef __APF27_H -#define __APF27_H - -/* FPGA program pin configuration */ -#define ACFG_FPGA_PWR (GPIO_PORTF | 19) /* FPGA prog pin */ -#define ACFG_FPGA_PRG (GPIO_PORTF | 11) /* FPGA prog pin */ -#define ACFG_FPGA_CLK (GPIO_PORTF | 15) /* FPGA clk pin */ -#define ACFG_FPGA_RDATA 0xD6000000 /* FPGA data addr */ -#define ACFG_FPGA_WDATA 0xD6000000 /* FPGA data addr */ -#define ACFG_FPGA_INIT (GPIO_PORTF | 12) /* FPGA init pin */ -#define ACFG_FPGA_DONE (GPIO_PORTF | 9) /* FPGA done pin */ -#define ACFG_FPGA_RW (GPIO_PORTF | 21) /* FPGA done pin */ -#define ACFG_FPGA_CS (GPIO_PORTF | 22) /* FPGA done pin */ -#define ACFG_FPGA_SUSPEND (GPIO_PORTF | 10) /* FPGA done pin */ -#define ACFG_FPGA_RESET (GPIO_PORTF | 7) /* FPGA done pin */ - -/* MMC pin */ -#define PC_PWRON (GPIO_PORTF | 16) - -/* - * MPU CLOCK source before PLL - * ACFG_CLK_FREQ (2/3 MPLL clock or ext 266 MHZ) - */ -#define ACFG_MPCTL0_VAL 0x01EF15D5 /* 399.000 MHz */ -#define ACFG_MPCTL1_VAL 0 -#define CONFIG_MPLL_FREQ 399 - -#define ACFG_CLK_FREQ (CONFIG_MPLL_FREQ*2/3) /* 266 MHz */ - -/* Serial clock source before PLL (should be named ACFG_SYSPLL_CLK_FREQ)*/ -#define ACFG_SPCTL0_VAL 0x0475206F /* 299.99937 MHz */ -#define ACFG_SPCTL1_VAL 0 -#define CONFIG_SPLL_FREQ 300 /* MHz */ - -/* ARM bus frequency (have to be a CONFIG_MPLL_FREQ ratio) */ -#define CONFIG_ARM_FREQ 399 /* up to 400 MHz */ - -/* external bus frequency (have to be a ACFG_CLK_FREQ ratio) */ -#define CONFIG_HCLK_FREQ 133 /* (ACFG_CLK_FREQ/2) */ - -#define CONFIG_PERIF1_FREQ 16 /* 16.625 MHz UART, GPT, PWM */ -#define CONFIG_PERIF2_FREQ 33 /* 33.25 MHz CSPI and SDHC */ -#define CONFIG_PERIF3_FREQ 33 /* 33.25 MHz LCD */ -#define CONFIG_PERIF4_FREQ 33 /* 33.25 MHz CSI */ -#define CONFIG_SSI1_FREQ 66 /* 66.50 MHz SSI1 */ -#define CONFIG_SSI2_FREQ 66 /* 66.50 MHz SSI2 */ -#define CONFIG_MSHC_FREQ 66 /* 66.50 MHz MSHC */ -#define CONFIG_H264_FREQ 66 /* 66.50 MHz H264 */ -#define CONFIG_CLK0_DIV 3 /* Divide CLK0 by 4 */ -#define CONFIG_CLK0_EN 1 /* CLK0 enabled */ - -/* external bus frequency (have to be a CONFIG_HCLK_FREQ ratio) */ -#define CONFIG_NFC_FREQ 44 /* NFC Clock up to 44 MHz wh 133MHz */ - -/* external serial bus frequency (have to be a CONFIG_SPLL_FREQ ratio) */ -#define CONFIG_USB_FREQ 60 /* 60 MHz */ - -/* - * SDRAM - */ -#if (ACFG_SDRAM_MBYTE_SYZE == 64) /* micron MT46H16M32LF -6 */ -/* micron 64MB */ -#define ACFG_SDRAM_NUM_COL 9 /* 8, 9, 10 or 11 - * column address bits - */ -#define ACFG_SDRAM_NUM_ROW 13 /* 11, 12 or 13 - * row address bits - */ -#define ACFG_SDRAM_REFRESH 3 /* 0=OFF 1=2048 - * 2=4096 3=8192 refresh - */ -#define ACFG_SDRAM_EXIT_PWD 25 /* ns exit power - * down delay - */ -#define ACFG_SDRAM_W2R_DELAY 1 /* write to read - * cycle delay > 0 - */ -#define ACFG_SDRAM_ROW_PRECHARGE_DELAY 18 /* ns */ -#define ACFG_SDRAM_TMRD_DELAY 2 /* Load mode register - * cycle delay 1..4 - */ -#define ACFG_SDRAM_TWR_DELAY 1 /* LPDDR: 0=2ck 1=3ck - * SDRAM: 0=1ck 1=2ck - */ -#define ACFG_SDRAM_RAS_DELAY 42 /* ns ACTIVE-to-PRECHARGE delay */ -#define ACFG_SDRAM_RRD_DELAY 12 /* ns ACTIVE-to-ACTIVE delay */ -#define ACFG_SDRAM_RCD_DELAY 18 /* ns Row to Column delay */ -#define ACFG_SDRAM_RC_DELAY 70 /* ns Row cycle delay (tRFC - * refresh to command) - */ -#define ACFG_SDRAM_CLOCK_CYCLE_CL_1 0 /* ns clock cycle time - * estimated fo CL=1 - * 0=force 3 for lpddr - */ -#define ACFG_SDRAM_PARTIAL_ARRAY_SR 0 /* 0=full 1=half 2=quater - * 3=Eighth 4=Sixteenth - */ -#define ACFG_SDRAM_DRIVE_STRENGH 0 /* 0=Full-strength 1=half - * 2=quater 3=Eighth - */ -#define ACFG_SDRAM_BURST_LENGTH 3 /* 2^N BYTES (N=0..3) */ -#define ACFG_SDRAM_SINGLE_ACCESS 0 /* 1= single access - * 0 = Burst mode - */ -#endif - -#if (ACFG_SDRAM_MBYTE_SYZE == 128) -/* micron 128MB */ -#define ACFG_SDRAM_NUM_COL 9 /* 8, 9, 10 or 11 - * column address bits - */ -#define ACFG_SDRAM_NUM_ROW 14 /* 11, 12 or 13 - * row address bits - */ -#define ACFG_SDRAM_REFRESH 3 /* 0=OFF 1=2048 - * 2=4096 3=8192 refresh - */ -#define ACFG_SDRAM_EXIT_PWD 25 /* ns exit power - * down delay - */ -#define ACFG_SDRAM_W2R_DELAY 1 /* write to read - * cycle delay > 0 - */ -#define ACFG_SDRAM_ROW_PRECHARGE_DELAY 18 /* ns */ -#define ACFG_SDRAM_TMRD_DELAY 2 /* Load mode register - * cycle delay 1..4 - */ -#define ACFG_SDRAM_TWR_DELAY 1 /* LPDDR: 0=2ck 1=3ck - * SDRAM: 0=1ck 1=2ck - */ -#define ACFG_SDRAM_RAS_DELAY 42 /* ns ACTIVE-to-PRECHARGE delay */ -#define ACFG_SDRAM_RRD_DELAY 12 /* ns ACTIVE-to-ACTIVE delay */ -#define ACFG_SDRAM_RCD_DELAY 18 /* ns Row to Column delay */ -#define ACFG_SDRAM_RC_DELAY 70 /* ns Row cycle delay (tRFC - * refresh to command) - */ -#define ACFG_SDRAM_CLOCK_CYCLE_CL_1 0 /* ns clock cycle time - * estimated fo CL=1 - * 0=force 3 for lpddr - */ -#define ACFG_SDRAM_PARTIAL_ARRAY_SR 0 /* 0=full 1=half 2=quater - * 3=Eighth 4=Sixteenth - */ -#define ACFG_SDRAM_DRIVE_STRENGH 0 /* 0=Full-strength 1=half - * 2=quater 3=Eighth - */ -#define ACFG_SDRAM_BURST_LENGTH 3 /* 2^N BYTES (N=0..3) */ -#define ACFG_SDRAM_SINGLE_ACCESS 0 /* 1= single access - * 0 = Burst mode - */ -#endif - -#if (ACFG_SDRAM_MBYTE_SYZE == 256) -/* micron 256MB */ -#define ACFG_SDRAM_NUM_COL 10 /* 8, 9, 10 or 11 - * column address bits - */ -#define ACFG_SDRAM_NUM_ROW 14 /* 11, 12 or 13 - * row address bits - */ -#define ACFG_SDRAM_REFRESH 3 /* 0=OFF 1=2048 - * 2=4096 3=8192 refresh - */ -#define ACFG_SDRAM_EXIT_PWD 25 /* ns exit power - * down delay - */ -#define ACFG_SDRAM_W2R_DELAY 1 /* write to read cycle - * delay > 0 - */ -#define ACFG_SDRAM_ROW_PRECHARGE_DELAY 18 /* ns */ -#define ACFG_SDRAM_TMRD_DELAY 2 /* Load mode register - * cycle delay 1..4 - */ -#define ACFG_SDRAM_TWR_DELAY 1 /* LPDDR: 0=2ck 1=3ck - * SDRAM: 0=1ck 1=2ck - */ -#define ACFG_SDRAM_RAS_DELAY 42 /* ns ACTIVE-to-PRECHARGE delay */ -#define ACFG_SDRAM_RRD_DELAY 12 /* ns ACTIVE-to-ACTIVE delay */ -#define ACFG_SDRAM_RCD_DELAY 18 /* ns Row to Column delay */ -#define ACFG_SDRAM_RC_DELAY 70 /* ns Row cycle delay (tRFC - * refresh to command) - */ -#define ACFG_SDRAM_CLOCK_CYCLE_CL_1 0 /* ns clock cycle time - * estimated fo CL=1 - * 0=force 3 for lpddr - */ -#define ACFG_SDRAM_PARTIAL_ARRAY_SR 0 /* 0=full 1=half 2=quater - * 3=Eighth 4=Sixteenth - */ -#define ACFG_SDRAM_DRIVE_STRENGH 0 /* 0=Full-strength - * 1=half - * 2=quater - * 3=Eighth - */ -#define ACFG_SDRAM_BURST_LENGTH 3 /* 2^N BYTES (N=0..3) */ -#define ACFG_SDRAM_SINGLE_ACCESS 0 /* 1= single access - * 0 = Burst mode - */ -#endif - -/* - * External interface - */ -/* - * CSCRxU_VAL: - * 31| x | x | x x |x x x x| x x | x | x |x x x x|16 - * |SP |WP | BCD | BCS | PSZ |PME|SYNC| DOL | - * - * 15| x x | x x x x x x | x | x x x x | x x x x |0 - * | CNC | WSC |EW | WWS | EDC | - * - * CSCRxL_VAL: - * 31| x x x x | x x x x | x x x x | x x x x |16 - * | OEA | OEN | EBWA | EBWN | - * 15|x x x x| x |x x x |x x x x| x | x | x | x | 0 - * | CSA |EBC| DSZ | CSN |PSR|CRE|WRAP|CSEN| - * - * CSCRxA_VAL: - * 31| x x x x | x x x x | x x x x | x x x x |16 - * | EBRA | EBRN | RWA | RWN | - * 15| x | x x |x x x|x x|x x|x x| x | x | x | x | 0 - * |MUM| LAH | LBN |LBA|DWW|DCT|WWU|AGE|CNC2|FCE| - */ - -/* CS0 configuration for 16 bit nor flash */ -#define ACFG_CS0U_VAL 0x0000CC03 -#define ACFG_CS0L_VAL 0xa0330D01 -#define ACFG_CS0A_VAL 0x00220800 - -#define ACFG_CS1U_VAL 0x00000f00 -#define ACFG_CS1L_VAL 0x00000D01 -#define ACFG_CS1A_VAL 0 - -#define ACFG_CS2U_VAL 0 -#define ACFG_CS2L_VAL 0 -#define ACFG_CS2A_VAL 0 - -#define ACFG_CS3U_VAL 0 -#define ACFG_CS3L_VAL 0 -#define ACFG_CS3A_VAL 0 - -#define ACFG_CS4U_VAL 0 -#define ACFG_CS4L_VAL 0 -#define ACFG_CS4A_VAL 0 - -/* FPGA 16 bit data bus */ -#define ACFG_CS5U_VAL 0x00000600 -#define ACFG_CS5L_VAL 0x00000D01 -#define ACFG_CS5A_VAL 0 - -#define ACFG_EIM_VAL 0x00002200 - - -/* - * FPGA specific settings - */ - -/* CLKO */ -#define ACFG_CCSR_VAL 0x00000305 -/* drive strength CLKO set to 2 */ -#define ACFG_DSCR10_VAL 0x00020000 -/* drive strength A1..A12 set to 2 */ -#define ACFG_DSCR3_VAL 0x02AAAAA8 -/* drive strength ctrl */ -#define ACFG_DSCR7_VAL 0x00020880 -/* drive strength data */ -#define ACFG_DSCR2_VAL 0xAAAAAAAA - - -/* - * Default configuration for GPIOs and peripherals - */ -#define ACFG_DDIR_A_VAL 0x00000000 -#define ACFG_OCR1_A_VAL 0x00000000 -#define ACFG_OCR2_A_VAL 0x00000000 -#define ACFG_ICFA1_A_VAL 0xFFFFFFFF -#define ACFG_ICFA2_A_VAL 0xFFFFFFFF -#define ACFG_ICFB1_A_VAL 0xFFFFFFFF -#define ACFG_ICFB2_A_VAL 0xFFFFFFFF -#define ACFG_DR_A_VAL 0x00000000 -#define ACFG_GIUS_A_VAL 0xFFFFFFFF -#define ACFG_ICR1_A_VAL 0x00000000 -#define ACFG_ICR2_A_VAL 0x00000000 -#define ACFG_IMR_A_VAL 0x00000000 -#define ACFG_GPR_A_VAL 0x00000000 -#define ACFG_PUEN_A_VAL 0xFFFFFFFF - -#define ACFG_DDIR_B_VAL 0x00000000 -#define ACFG_OCR1_B_VAL 0x00000000 -#define ACFG_OCR2_B_VAL 0x00000000 -#define ACFG_ICFA1_B_VAL 0xFFFFFFFF -#define ACFG_ICFA2_B_VAL 0xFFFFFFFF -#define ACFG_ICFB1_B_VAL 0xFFFFFFFF -#define ACFG_ICFB2_B_VAL 0xFFFFFFFF -#define ACFG_DR_B_VAL 0x00000000 -#define ACFG_GIUS_B_VAL 0xFF3FFFF0 -#define ACFG_ICR1_B_VAL 0x00000000 -#define ACFG_ICR2_B_VAL 0x00000000 -#define ACFG_IMR_B_VAL 0x00000000 -#define ACFG_GPR_B_VAL 0x00000000 -#define ACFG_PUEN_B_VAL 0xFFFFFFFF - -#define ACFG_DDIR_C_VAL 0x00000000 -#define ACFG_OCR1_C_VAL 0x00000000 -#define ACFG_OCR2_C_VAL 0x00000000 -#define ACFG_ICFA1_C_VAL 0xFFFFFFFF -#define ACFG_ICFA2_C_VAL 0xFFFFFFFF -#define ACFG_ICFB1_C_VAL 0xFFFFFFFF -#define ACFG_ICFB2_C_VAL 0xFFFFFFFF -#define ACFG_DR_C_VAL 0x00000000 -#define ACFG_GIUS_C_VAL 0xFFFFC07F -#define ACFG_ICR1_C_VAL 0x00000000 -#define ACFG_ICR2_C_VAL 0x00000000 -#define ACFG_IMR_C_VAL 0x00000000 -#define ACFG_GPR_C_VAL 0x00000000 -#define ACFG_PUEN_C_VAL 0xFFFFFF87 - -#define ACFG_DDIR_D_VAL 0x00000000 -#define ACFG_OCR1_D_VAL 0x00000000 -#define ACFG_OCR2_D_VAL 0x00000000 -#define ACFG_ICFA1_D_VAL 0xFFFFFFFF -#define ACFG_ICFA2_D_VAL 0xFFFFFFFF -#define ACFG_ICFB1_D_VAL 0xFFFFFFFF -#define ACFG_ICFB2_D_VAL 0xFFFFFFFF -#define ACFG_DR_D_VAL 0x00000000 -#define ACFG_GIUS_D_VAL 0xFFFFFFFF -#define ACFG_ICR1_D_VAL 0x00000000 -#define ACFG_ICR2_D_VAL 0x00000000 -#define ACFG_IMR_D_VAL 0x00000000 -#define ACFG_GPR_D_VAL 0x00000000 -#define ACFG_PUEN_D_VAL 0xFFFFFFFF - -#define ACFG_DDIR_E_VAL 0x00000000 -#define ACFG_OCR1_E_VAL 0x00000000 -#define ACFG_OCR2_E_VAL 0x00000000 -#define ACFG_ICFA1_E_VAL 0xFFFFFFFF -#define ACFG_ICFA2_E_VAL 0xFFFFFFFF -#define ACFG_ICFB1_E_VAL 0xFFFFFFFF -#define ACFG_ICFB2_E_VAL 0xFFFFFFFF -#define ACFG_DR_E_VAL 0x00000000 -#define ACFG_GIUS_E_VAL 0xFCFFCCF8 -#define ACFG_ICR1_E_VAL 0x00000000 -#define ACFG_ICR2_E_VAL 0x00000000 -#define ACFG_IMR_E_VAL 0x00000000 -#define ACFG_GPR_E_VAL 0x00000000 -#define ACFG_PUEN_E_VAL 0xFFFFFFFF - -#define ACFG_DDIR_F_VAL 0x00000000 -#define ACFG_OCR1_F_VAL 0x00000000 -#define ACFG_OCR2_F_VAL 0x00000000 -#define ACFG_ICFA1_F_VAL 0xFFFFFFFF -#define ACFG_ICFA2_F_VAL 0xFFFFFFFF -#define ACFG_ICFB1_F_VAL 0xFFFFFFFF -#define ACFG_ICFB2_F_VAL 0xFFFFFFFF -#define ACFG_DR_F_VAL 0x00000000 -#define ACFG_GIUS_F_VAL 0xFF7F8000 -#define ACFG_ICR1_F_VAL 0x00000000 -#define ACFG_ICR2_F_VAL 0x00000000 -#define ACFG_IMR_F_VAL 0x00000000 -#define ACFG_GPR_F_VAL 0x00000000 -#define ACFG_PUEN_F_VAL 0xFFFFFFFF - -/* Enforce DDR signal strengh & enable USB/PP/DMA burst override bits */ -#define ACFG_GPCR_VAL 0x0003000F - -#define ACFG_ESDMISC_VAL ESDMISC_LHD+ESDMISC_MDDREN - -/* FMCR select num LPDDR RAMs and nand 16bits, 2KB pages */ -#if (CONFIG_NR_DRAM_BANKS == 1) -#define ACFG_FMCR_VAL 0xFFFFFFF9 -#elif (CONFIG_NR_DRAM_BANKS == 2) -#define ACFG_FMCR_VAL 0xFFFFFFFB -#endif - -#define ACFG_AIPI1_PSR0_VAL 0x20040304 -#define ACFG_AIPI1_PSR1_VAL 0xDFFBFCFB -#define ACFG_AIPI2_PSR0_VAL 0x00000000 -#define ACFG_AIPI2_PSR1_VAL 0xFFFFFFFF - -/* PCCR enable DMA FEC I2C1 IIM SDHC1 */ -#define ACFG_PCCR0_VAL 0x05070410 -#define ACFG_PCCR1_VAL 0xA14A0608 - -/* - * From here, there should not be any user configuration. - * All Equations are automatic - */ - -/* fixme none integer value (7.5ns) => 2*hclock = 15ns */ -#define ACFG_2XHCLK_LGTH (2000/CONFIG_HCLK_FREQ) /* ns */ - -/* USB 60 MHz ; ARM up to 400; HClK up to 133MHz*/ -#define CSCR_MASK 0x0300800D - -#define ACFG_CSCR_VAL \ - (CSCR_MASK \ - |((((CONFIG_SPLL_FREQ/CONFIG_USB_FREQ)-1)&0x07) << 28) \ - |((((CONFIG_MPLL_FREQ/CONFIG_ARM_FREQ)-1)&0x03) << 12) \ - |((((ACFG_CLK_FREQ/CONFIG_HCLK_FREQ)-1)&0x03) << 8)) - -/* SSIx CLKO NFC H264 MSHC */ -#define ACFG_PCDR0_VAL\ - (((((ACFG_CLK_FREQ/CONFIG_MSHC_FREQ)-1)&0x3F)<<0) \ - |((((CONFIG_HCLK_FREQ/CONFIG_NFC_FREQ)-1)&0x0F)<<6) \ - |(((((ACFG_CLK_FREQ/CONFIG_H264_FREQ)-2)*2)&0x3F)<<10)\ - |(((((ACFG_CLK_FREQ/CONFIG_SSI1_FREQ)-2)*2)&0x3F)<<16)\ - |(((CONFIG_CLK0_DIV)&0x07)<<22)\ - |(((CONFIG_CLK0_EN)&0x01)<<25)\ - |(((((ACFG_CLK_FREQ/CONFIG_SSI2_FREQ)-2)*2)&0x3F)<<26)) - -/* PERCLKx */ -#define ACFG_PCDR1_VAL\ - (((((ACFG_CLK_FREQ/CONFIG_PERIF1_FREQ)-1)&0x3F)<<0) \ - |((((ACFG_CLK_FREQ/CONFIG_PERIF2_FREQ)-1)&0x3F)<<8) \ - |((((ACFG_CLK_FREQ/CONFIG_PERIF3_FREQ)-1)&0x3F)<<16) \ - |((((ACFG_CLK_FREQ/CONFIG_PERIF4_FREQ)-1)&0x3F)<<24)) - -/* SDRAM controller programming Values */ -#if (((2*ACFG_SDRAM_CLOCK_CYCLE_CL_1) > (3*ACFG_2XHCLK_LGTH)) || \ - (ACFG_SDRAM_CLOCK_CYCLE_CL_1 < 1)) -#define REG_FIELD_SCL_VAL 3 -#define REG_FIELD_SCLIMX_VAL 0 -#else -#define REG_FIELD_SCL_VAL\ - ((2*ACFG_SDRAM_CLOCK_CYCLE_CL_1+ACFG_2XHCLK_LGTH-1)/ \ - ACFG_2XHCLK_LGTH) -#define REG_FIELD_SCLIMX_VAL REG_FIELD_SCL_VAL -#endif - -#if ((2*ACFG_SDRAM_RC_DELAY) > (16*ACFG_2XHCLK_LGTH)) -#define REG_FIELD_SRC_VAL 0 -#else -#define REG_FIELD_SRC_VAL\ - ((2*ACFG_SDRAM_RC_DELAY+ACFG_2XHCLK_LGTH-1)/ \ - ACFG_2XHCLK_LGTH) -#endif - -/* TBD Power down timer ; PRCT Bit Field Encoding; burst length 8 ; FP = 0*/ -#define REG_ESDCTL_BASE_CONFIG (0x80020485\ - | (((ACFG_SDRAM_NUM_ROW-11)&0x7)<<24)\ - | (((ACFG_SDRAM_NUM_COL-8)&0x3)<<20)\ - | (((ACFG_SDRAM_REFRESH)&0x7)<<13)) - -#define ACFG_NORMAL_RW_CMD ((0x0<<28)+REG_ESDCTL_BASE_CONFIG) -#define ACFG_PRECHARGE_CMD ((0x1<<28)+REG_ESDCTL_BASE_CONFIG) -#define ACFG_AUTOREFRESH_CMD ((0x2<<28)+REG_ESDCTL_BASE_CONFIG) -#define ACFG_SET_MODE_REG_CMD ((0x3<<28)+REG_ESDCTL_BASE_CONFIG) - -/* ESDRAMC Configuration Registers : force CL=3 to lpddr */ -#define ACFG_SDRAM_ESDCFG_REGISTER_VAL (0x0\ - | (((((2*ACFG_SDRAM_EXIT_PWD+ACFG_2XHCLK_LGTH-1)/ \ - ACFG_2XHCLK_LGTH)-1)&0x3)<<21)\ - | (((ACFG_SDRAM_W2R_DELAY-1)&0x1)<<20)\ - | (((((2*ACFG_SDRAM_ROW_PRECHARGE_DELAY+ \ - ACFG_2XHCLK_LGTH-1)/ACFG_2XHCLK_LGTH)-1)&0x3)<<18) \ - | (((ACFG_SDRAM_TMRD_DELAY-1)&0x3)<<16)\ - | (((ACFG_SDRAM_TWR_DELAY)&0x1)<<15)\ - | (((((2*ACFG_SDRAM_RAS_DELAY+ACFG_2XHCLK_LGTH-1)/ \ - ACFG_2XHCLK_LGTH)-1)&0x7)<<12) \ - | (((((2*ACFG_SDRAM_RRD_DELAY+ACFG_2XHCLK_LGTH-1)/ \ - ACFG_2XHCLK_LGTH)-1)&0x3)<<10) \ - | (((REG_FIELD_SCLIMX_VAL)&0x3)<<8)\ - | (((((2*ACFG_SDRAM_RCD_DELAY+ACFG_2XHCLK_LGTH-1)/ \ - ACFG_2XHCLK_LGTH)-1)&0x7)<<4) \ - | (((REG_FIELD_SRC_VAL)&0x0F)<<0)) - -/* Issue Mode register Command to SDRAM */ -#define ACFG_SDRAM_MODE_REGISTER_VAL\ - ((((ACFG_SDRAM_BURST_LENGTH)&0x7)<<(0))\ - | (((REG_FIELD_SCL_VAL)&0x7)<<(4))\ - | ((0)<<(3)) /* sequentiql access */ \ - /*| (((ACFG_SDRAM_SINGLE_ACCESS)&0x1)<<(1))*/) - -/* Issue Extended Mode register Command to SDRAM */ -#define ACFG_SDRAM_EXT_MODE_REGISTER_VAL\ - ((ACFG_SDRAM_PARTIAL_ARRAY_SR<<0)\ - | (ACFG_SDRAM_DRIVE_STRENGH<<(5))\ - | (1<<(ACFG_SDRAM_NUM_COL+ACFG_SDRAM_NUM_ROW+1+2))) - -/* Issue Precharge all Command to SDRAM */ -#define ACFG_SDRAM_PRECHARGE_ALL_VAL (1<<10) - -#endif /* __APF27_H */ diff --git a/board/armadeus/apf27/fpga.c b/board/armadeus/apf27/fpga.c deleted file mode 100644 index 9e2f39f9814..00000000000 --- a/board/armadeus/apf27/fpga.c +++ /dev/null @@ -1,226 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2002-2013 - * Eric Jarrige <eric.jarrige@armadeus.org> - * - * based on the files by - * Rich Ireland, Enterasys Networks, rireland@enterasys.com - * and - * Keith Outwater, keith_outwater@mvis.com - */ -#include <common.h> -#include <log.h> -#include <linux/delay.h> - -#include <asm/arch/imx-regs.h> -#include <asm/gpio.h> -#include <asm/io.h> -#include <command.h> -#include <config.h> -#include "fpga.h" -#include <spartan3.h> -#include "apf27.h" - -/* - * Note that these are pointers to code that is in Flash. They will be - * relocated at runtime. - * Spartan2 code is used to download our Spartan 3 :) code is compatible. - * Just take care about the file size - */ -xilinx_spartan3_slave_parallel_fns fpga_fns = { - fpga_pre_fn, - fpga_pgm_fn, - fpga_init_fn, - NULL, - fpga_done_fn, - fpga_clk_fn, - fpga_cs_fn, - fpga_wr_fn, - fpga_rdata_fn, - fpga_wdata_fn, - fpga_busy_fn, - fpga_abort_fn, - fpga_post_fn, -}; - -xilinx_desc fpga[CONFIG_FPGA_COUNT] = { - {xilinx_spartan3, - slave_parallel, - 1196128l/8, - (void *)&fpga_fns, - 0, - &spartan3_op, - "3s200aft256"} -}; - -/* - * Initialize GPIO port B before download - */ -int fpga_pre_fn(int cookie) -{ - /* Initialize GPIO pins */ - gpio_set_value(ACFG_FPGA_PWR, 1); - imx_gpio_mode(ACFG_FPGA_INIT | GPIO_IN | GPIO_PUEN | GPIO_GPIO); - imx_gpio_mode(ACFG_FPGA_DONE | GPIO_IN | GPIO_PUEN | GPIO_GPIO); - imx_gpio_mode(ACFG_FPGA_PRG | GPIO_OUT | GPIO_PUEN | GPIO_GPIO); - imx_gpio_mode(ACFG_FPGA_CLK | GPIO_OUT | GPIO_PUEN | GPIO_GPIO); - imx_gpio_mode(ACFG_FPGA_RW | GPIO_OUT | GPIO_PUEN | GPIO_GPIO); - imx_gpio_mode(ACFG_FPGA_CS | GPIO_OUT | GPIO_PUEN | GPIO_GPIO); - imx_gpio_mode(ACFG_FPGA_SUSPEND|GPIO_OUT|GPIO_PUEN|GPIO_GPIO); - gpio_set_value(ACFG_FPGA_RESET, 1); - imx_gpio_mode(ACFG_FPGA_RESET | GPIO_OUT | GPIO_PUEN | GPIO_GPIO); - imx_gpio_mode(ACFG_FPGA_PWR | GPIO_OUT | GPIO_PUEN | GPIO_GPIO); - gpio_set_value(ACFG_FPGA_PRG, 1); - gpio_set_value(ACFG_FPGA_CLK, 1); - gpio_set_value(ACFG_FPGA_RW, 1); - gpio_set_value(ACFG_FPGA_CS, 1); - gpio_set_value(ACFG_FPGA_SUSPEND, 0); - gpio_set_value(ACFG_FPGA_PWR, 0); - udelay(30000); /*wait until supply started*/ - - return cookie; -} - -/* - * Set the FPGA's active-low program line to the specified level - */ -int fpga_pgm_fn(int assert, int flush, int cookie) -{ - debug("%s:%d: FPGA PROGRAM %s", __func__, __LINE__, - assert ? "high" : "low"); - gpio_set_value(ACFG_FPGA_PRG, !assert); - return assert; -} - -/* - * Set the FPGA's active-high clock line to the specified level - */ -int fpga_clk_fn(int assert_clk, int flush, int cookie) -{ - debug("%s:%d: FPGA CLOCK %s", __func__, __LINE__, - assert_clk ? "high" : "low"); - gpio_set_value(ACFG_FPGA_CLK, !assert_clk); - return assert_clk; -} - -/* - * Test the state of the active-low FPGA INIT line. Return 1 on INIT - * asserted (low). - */ -int fpga_init_fn(int cookie) -{ - int value; - debug("%s:%d: INIT check... ", __func__, __LINE__); - value = gpio_get_value(ACFG_FPGA_INIT); - /* printf("init value read %x",value); */ -#ifdef CONFIG_SYS_FPGA_IS_PROTO - return value; -#else - return !value; -#endif -} - -/* - * Test the state of the active-high FPGA DONE pin - */ -int fpga_done_fn(int cookie) -{ - debug("%s:%d: DONE check... %s", __func__, __LINE__, - gpio_get_value(ACFG_FPGA_DONE) ? "high" : "low"); - return gpio_get_value(ACFG_FPGA_DONE) ? FPGA_SUCCESS : FPGA_FAIL; -} - -/* - * Set the FPGA's wr line to the specified level - */ -int fpga_wr_fn(int assert_write, int flush, int cookie) -{ - debug("%s:%d: FPGA RW... %s ", __func__, __LINE__, - assert_write ? "high" : "low"); - gpio_set_value(ACFG_FPGA_RW, !assert_write); - return assert_write; -} - -int fpga_cs_fn(int assert_cs, int flush, int cookie) -{ - debug("%s:%d: FPGA CS %s ", __func__, __LINE__, - assert_cs ? "high" : "low"); - gpio_set_value(ACFG_FPGA_CS, !assert_cs); - return assert_cs; -} - -int fpga_rdata_fn(unsigned char *data, int cookie) -{ - debug("%s:%d: FPGA READ DATA %02X ", __func__, __LINE__, - *((char *)ACFG_FPGA_RDATA)); - *data = (unsigned char) - ((*((unsigned short *)ACFG_FPGA_RDATA))&0x00FF); - return *data; -} - -int fpga_wdata_fn(unsigned char data, int flush, int cookie) -{ - debug("%s:%d: FPGA WRITE DATA %02X ", __func__, __LINE__, - data); - *((unsigned short *)ACFG_FPGA_WDATA) = data; - return data; -} - -int fpga_abort_fn(int cookie) -{ - return fpga_post_fn(cookie); -} - - -int fpga_busy_fn(int cookie) -{ - return 1; -} - -int fpga_post_fn(int cookie) -{ - debug("%s:%d: FPGA POST ", __func__, __LINE__); - - imx_gpio_mode(ACFG_FPGA_RW | GPIO_PF | GPIO_PUEN); - imx_gpio_mode(ACFG_FPGA_CS | GPIO_PF | GPIO_PUEN); - imx_gpio_mode(ACFG_FPGA_CLK | GPIO_PF | GPIO_PUEN); - gpio_set_value(ACFG_FPGA_PRG, 1); - gpio_set_value(ACFG_FPGA_RESET, 0); - imx_gpio_mode(ACFG_FPGA_RESET | GPIO_OUT | GPIO_PUEN | GPIO_GPIO); - return cookie; -} - -void apf27_fpga_setup(void) -{ - struct pll_regs *pll = (struct pll_regs *)IMX_PLL_BASE; - struct system_control_regs *system = - (struct system_control_regs *)IMX_SYSTEM_CTL_BASE; - - /* Configure FPGA CLKO */ - writel(ACFG_CCSR_VAL, &pll->ccsr); - - /* Configure strentgh for FPGA */ - writel(ACFG_DSCR10_VAL, &system->dscr10); - writel(ACFG_DSCR3_VAL, &system->dscr3); - writel(ACFG_DSCR7_VAL, &system->dscr7); - writel(ACFG_DSCR2_VAL, &system->dscr2); -} - -/* - * Initialize the fpga. Return 1 on success, 0 on failure. - */ -void APF27_init_fpga(void) -{ - int i; - - apf27_fpga_setup(); - - fpga_init(); - - for (i = 0; i < CONFIG_FPGA_COUNT; i++) { - debug("%s:%d: Adding fpga %d\n", __func__, __LINE__, i); - fpga_add(fpga_xilinx, &fpga[i]); - } - - return; -} diff --git a/board/armadeus/apf27/fpga.h b/board/armadeus/apf27/fpga.h deleted file mode 100644 index d6394e976a8..00000000000 --- a/board/armadeus/apf27/fpga.h +++ /dev/null @@ -1,24 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2002-2013 - * Eric Jarrige <eric.jarrige@armadeus.org> - * - * based on the files by - * Rich Ireland, Enterasys Networks, rireland@enterasys.com - * and - * Keith Outwater, keith_outwater@mvis.com - */ -extern void APF27_init_fpga(void); - -extern int fpga_pre_fn(int cookie); -extern int fpga_pgm_fn(int assert_pgm, int flush, int cookie); -extern int fpga_cs_fn(int assert_cs, int flush, int cookie); -extern int fpga_init_fn(int cookie); -extern int fpga_done_fn(int cookie); -extern int fpga_clk_fn(int assert_clk, int flush, int cookie); -extern int fpga_wr_fn(int assert_write, int flush, int cookie); -extern int fpga_rdata_fn(unsigned char *data, int cookie); -extern int fpga_wdata_fn(unsigned char data, int flush, int cookie); -extern int fpga_abort_fn(int cookie); -extern int fpga_post_fn(int cookie); -extern int fpga_busy_fn(int cookie); diff --git a/board/armadeus/apf27/lowlevel_init.S b/board/armadeus/apf27/lowlevel_init.S deleted file mode 100644 index 0991b7ddf49..00000000000 --- a/board/armadeus/apf27/lowlevel_init.S +++ /dev/null @@ -1,166 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2013 Philippe Reynes <tremyfr@yahoo.fr> - */ - -#include <config.h> -#include <generated/asm-offsets.h> -#include <asm/macro.h> -#include <asm/arch/imx-regs.h> -#include "apf27.h" - - .macro init_aipi - /* - * setup AIPI1 and AIPI2 - */ - write32 AIPI1_PSR0, ACFG_AIPI1_PSR0_VAL - write32 AIPI1_PSR1, ACFG_AIPI1_PSR1_VAL - write32 AIPI2_PSR0, ACFG_AIPI2_PSR0_VAL - write32 AIPI2_PSR1, ACFG_AIPI2_PSR1_VAL - - /* Change SDRAM signal strengh */ - ldr r0, =GPCR - ldr r1, =ACFG_GPCR_VAL - ldr r5, [r0] - orr r5, r5, r1 - str r5, [r0] - - .endm /* init_aipi */ - - .macro init_clock - ldr r0, =CSCR - /* disable MPLL/SPLL first */ - ldr r1, [r0] - bic r1, r1, #(CSCR_MPEN|CSCR_SPEN) - str r1, [r0] - - /* - * pll clock initialization predefined in apf27.h - */ - write32 MPCTL0, ACFG_MPCTL0_VAL - write32 SPCTL0, ACFG_SPCTL0_VAL - - write32 CSCR, ACFG_CSCR_VAL|CSCR_MPLL_RESTART|CSCR_SPLL_RESTART - - /* - * add some delay here - */ - mov r1, #0x1000 - 1: subs r1, r1, #0x1 - bne 1b - - /* peripheral clock divider */ - write32 PCDR0, ACFG_PCDR0_VAL - write32 PCDR1, ACFG_PCDR1_VAL - - /* Configure PCCR0 and PCCR1 */ - write32 PCCR0, ACFG_PCCR0_VAL - write32 PCCR1, ACFG_PCCR1_VAL - - .endm /* init_clock */ - - .macro init_ddr - /* wait for SDRAM/LPDDR ready (SDRAMRDY) */ - ldr r0, =IMX_ESD_BASE - ldr r4, =ESDMISC_SDRAM_RDY -2: ldr r1, [r0, #ESDMISC_ROF] - ands r1, r1, r4 - bpl 2b - - /* LPDDR Soft Reset Mobile/Low Power DDR SDRAM. */ - ldr r0, =IMX_ESD_BASE - ldr r4, =ACFG_ESDMISC_VAL - orr r1, r4, #ESDMISC_MDDR_DL_RST - str r1, [r0, #ESDMISC_ROF] - - /* Hold for more than 200ns */ - ldr r1, =0x10000 -1: subs r1, r1, #0x1 - bne 1b - - str r4, [r0] - - ldr r0, =IMX_ESD_BASE - ldr r1, =ACFG_SDRAM_ESDCFG_REGISTER_VAL - str r1, [r0, #ESDCFG0_ROF] - - ldr r0, =IMX_ESD_BASE - ldr r1, =ACFG_PRECHARGE_CMD - str r1, [r0, #ESDCTL0_ROF] - - /* write8(0xA0001000, any value) */ - ldr r1, =PHYS_SDRAM_1+ACFG_SDRAM_PRECHARGE_ALL_VAL - strb r2, [r1] - - ldr r1, =ACFG_AUTOREFRESH_CMD - str r1, [r0, #ESDCTL0_ROF] - - ldr r4, =PHYS_SDRAM_1 /* CSD0 base address */ - - ldr r6,=0x7 /* load loop counter */ -1: str r5,[r4] /* run auto-refresh cycle to array 0 */ - subs r6,r6,#1 - bne 1b - - ldr r1, =ACFG_SET_MODE_REG_CMD - str r1, [r0, #ESDCTL0_ROF] - - /* set standard mode register */ - ldr r4, = PHYS_SDRAM_1+ACFG_SDRAM_MODE_REGISTER_VAL - strb r2, [r4] - - /* set extended mode register */ - ldr r4, =PHYS_SDRAM_1+ACFG_SDRAM_EXT_MODE_REGISTER_VAL - strb r5, [r4] - - ldr r1, =ACFG_NORMAL_RW_CMD - str r1, [r0, #ESDCTL0_ROF] - - /* 2nd sdram */ - ldr r0, =IMX_ESD_BASE - ldr r1, =ACFG_SDRAM_ESDCFG_REGISTER_VAL - str r1, [r0, #ESDCFG1_ROF] - - ldr r0, =IMX_ESD_BASE - ldr r1, =ACFG_PRECHARGE_CMD - str r1, [r0, #ESDCTL1_ROF] - - /* write8(0xB0001000, any value) */ - ldr r1, =PHYS_SDRAM_2+ACFG_SDRAM_PRECHARGE_ALL_VAL - strb r2, [r1] - - ldr r1, =ACFG_AUTOREFRESH_CMD - str r1, [r0, #ESDCTL1_ROF] - - ldr r4, =PHYS_SDRAM_2 /* CSD1 base address */ - - ldr r6,=0x7 /* load loop counter */ -1: str r5,[r4] /* run auto-refresh cycle to array 0 */ - subs r6,r6,#1 - bne 1b - - ldr r1, =ACFG_SET_MODE_REG_CMD - str r1, [r0, #ESDCTL1_ROF] - - /* set standard mode register */ - ldr r4, =PHYS_SDRAM_2+ACFG_SDRAM_MODE_REGISTER_VAL - strb r2, [r4] - - /* set extended mode register */ - ldr r4, =PHYS_SDRAM_2+ACFG_SDRAM_EXT_MODE_REGISTER_VAL - strb r2, [r4] - - ldr r1, =ACFG_NORMAL_RW_CMD - str r1, [r0, #ESDCTL1_ROF] - .endm /* init_ddr */ - -.globl lowlevel_init -lowlevel_init: - - init_aipi - init_clock -#ifdef CONFIG_SPL_BUILD - init_ddr -#endif - - mov pc, lr |