aboutsummaryrefslogtreecommitdiff
path: root/board/liebherr
diff options
context:
space:
mode:
Diffstat (limited to 'board/liebherr')
-rw-r--r--board/liebherr/lwmon5/Kconfig12
-rw-r--r--board/liebherr/lwmon5/MAINTAINERS6
-rw-r--r--board/liebherr/lwmon5/Makefile9
-rw-r--r--board/liebherr/lwmon5/config.mk18
-rw-r--r--board/liebherr/lwmon5/init.S75
-rw-r--r--board/liebherr/lwmon5/kbd.c491
-rw-r--r--board/liebherr/lwmon5/lwmon5.c551
-rw-r--r--board/liebherr/lwmon5/sdram.c249
8 files changed, 0 insertions, 1411 deletions
diff --git a/board/liebherr/lwmon5/Kconfig b/board/liebherr/lwmon5/Kconfig
deleted file mode 100644
index ec8349da980..00000000000
--- a/board/liebherr/lwmon5/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_LWMON5
-
-config SYS_BOARD
- default "lwmon5"
-
-config SYS_VENDOR
- default "liebherr"
-
-config SYS_CONFIG_NAME
- default "lwmon5"
-
-endif
diff --git a/board/liebherr/lwmon5/MAINTAINERS b/board/liebherr/lwmon5/MAINTAINERS
deleted file mode 100644
index df4573012ca..00000000000
--- a/board/liebherr/lwmon5/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-LWMON5 BOARD
-M: Stefan Roese <sr@denx.de>
-S: Maintained
-F: board/liebherr/lwmon5/
-F: include/configs/lwmon5.h
-F: configs/lwmon5_defconfig
diff --git a/board/liebherr/lwmon5/Makefile b/board/liebherr/lwmon5/Makefile
deleted file mode 100644
index 02478ca0c85..00000000000
--- a/board/liebherr/lwmon5/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# (C) Copyright 2002-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = lwmon5.o kbd.o sdram.o
-extra-y += init.o
diff --git a/board/liebherr/lwmon5/config.mk b/board/liebherr/lwmon5/config.mk
deleted file mode 100644
index d0348e8024d..00000000000
--- a/board/liebherr/lwmon5/config.mk
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# (C) Copyright 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-# lwmon5 (440EPx)
-#
-
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
-
-ifeq ($(dbcr),1)
-PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000
-endif
diff --git a/board/liebherr/lwmon5/init.S b/board/liebherr/lwmon5/init.S
deleted file mode 100644
index e5207c2b40b..00000000000
--- a/board/liebherr/lwmon5/init.S
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <asm-offsets.h>
-#include <ppc_asm.tmpl>
-#include <config.h>
-#include <asm/mmu.h>
-
-/**************************************************************************
- * TLB TABLE
- *
- * This table is used by the cpu boot code to setup the initial tlb
- * entries. Rather than make broad assumptions in the cpu source tree,
- * this table lets each board set things up however they like.
- *
- * Pointer to the table is returned in r1
- *
- *************************************************************************/
- .section .bootpg,"ax"
- .globl tlbtab
-
-tlbtab:
- tlbtab_start
-
- /*
- * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
- * speed up boot process. It is patched after relocation to enable SA_I
- */
- tlbentry(CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR, 1, AC_RWX | SA_G)
-
- /*
- * TLB entries for SDRAM are not needed on this platform.
- * They are dynamically generated in the SPD DDR(2) detection
- * routine.
- */
-
-#ifdef CONFIG_SYS_INIT_RAM_DCACHE
- /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
- tlbentry(CONFIG_SYS_INIT_RAM_ADDR, SZ_4K, CONFIG_SYS_INIT_RAM_ADDR, 0, AC_RWX | SA_G)
-#endif
-
- /* TLB-entry for PCI Memory */
- tlbentry(CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE, 1, AC_RW | SA_IG)
- tlbentry(CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 1, AC_RW | SA_IG)
- tlbentry(CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 1, AC_RW | SA_IG)
- tlbentry(CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 1, AC_RW | SA_IG)
-
- /* TLB-entry for the FPGA Chip select 2 */
- tlbentry(CONFIG_SYS_FPGA_BASE_0, SZ_1M, CONFIG_SYS_FPGA_BASE_0, 1, AC_RWX | SA_I|SA_G)
-
- /* TLB-entry for the FPGA Chip select 3 */
- tlbentry(CONFIG_SYS_FPGA_BASE_1, SZ_1M, CONFIG_SYS_FPGA_BASE_1, 1,AC_RWX | SA_I|SA_G)
-
- /* TLB-entry for the LIME Controller */
- tlbentry(CONFIG_SYS_LIME_BASE_0, SZ_16M, CONFIG_SYS_LIME_BASE_0, 1, AC_RWX | SA_I|SA_G)
- tlbentry(CONFIG_SYS_LIME_BASE_1, SZ_16M, CONFIG_SYS_LIME_BASE_1, 1, AC_RWX | SA_I|SA_G)
- tlbentry(CONFIG_SYS_LIME_BASE_2, SZ_16M, CONFIG_SYS_LIME_BASE_2, 1, AC_RWX | SA_I|SA_G)
- tlbentry(CONFIG_SYS_LIME_BASE_3, SZ_16M, CONFIG_SYS_LIME_BASE_3, 1, AC_RWX | SA_I|SA_G)
-
- /* TLB-entry for Internal Registers & OCM */
- tlbentry(0xe0000000, SZ_16M, 0xe0000000, 0, AC_RWX | SA_I)
-
- /*TLB-entry PCI registers*/
- tlbentry(0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_RWX | SA_IG)
-
- /* TLB-entry for peripherals */
- tlbentry(0xEF000000, SZ_16M, 0xEF000000, 1, AC_RWX | SA_IG)
-
- tlbtab_end
diff --git a/board/liebherr/lwmon5/kbd.c b/board/liebherr/lwmon5/kbd.c
deleted file mode 100644
index d6c0a205a3c..00000000000
--- a/board/liebherr/lwmon5/kbd.c
+++ /dev/null
@@ -1,491 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2001, 2002
- * DENX Software Engineering
- * Wolfgang Denk, wd@denx.de
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <i2c.h>
-#include <command.h>
-#include <console.h>
-#include <post.h>
-#include <serial.h>
-#include <malloc.h>
-
-#include <linux/types.h>
-#include <linux/string.h> /* for strdup */
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void kbd_init (void);
-static int compare_magic (uchar *kbd_data, uchar *str);
-
-/*--------------------- Local macros and constants --------------------*/
-#define _NOT_USED_ 0xFFFFFFFF
-
-/*------------------------- dspic io expander -----------------------*/
-#define DSPIC_PON_STATUS_REG 0x80A
-#define DSPIC_PON_INV_STATUS_REG 0x80C
-#define DSPIC_PON_KEY_REG 0x810
-/*------------------------- Keyboard controller -----------------------*/
-/* command codes */
-#define KEYBD_CMD_READ_KEYS 0x01
-#define KEYBD_CMD_READ_VERSION 0x02
-#define KEYBD_CMD_READ_STATUS 0x03
-#define KEYBD_CMD_RESET_ERRORS 0x10
-
-/* status codes */
-#define KEYBD_STATUS_MASK 0x3F
-#define KEYBD_STATUS_H_RESET 0x20
-#define KEYBD_STATUS_BROWNOUT 0x10
-#define KEYBD_STATUS_WD_RESET 0x08
-#define KEYBD_STATUS_OVERLOAD 0x04
-#define KEYBD_STATUS_ILLEGAL_WR 0x02
-#define KEYBD_STATUS_ILLEGAL_RD 0x01
-
-/* Number of bytes returned from Keyboard Controller */
-#define KEYBD_VERSIONLEN 2 /* version information */
-
-/*
- * This is different from the "old" lwmon dsPIC kbd controller
- * implementation. Now the controller still answers with 9 bytes,
- * but the last 3 bytes are always "0x06 0x07 0x08". So we just
- * set the length to compare to 6 instead of 9.
- */
-#define KEYBD_DATALEN 6 /* normal key scan data */
-
-/* maximum number of "magic" key codes that can be assigned */
-
-static uchar kbd_addr = CONFIG_SYS_I2C_KEYBD_ADDR;
-static uchar dspic_addr = CONFIG_SYS_I2C_DSPIC_IO_ADDR;
-
-static uchar *key_match (uchar *);
-
-#define KEYBD_SET_DEBUGMODE '#' /* Magic key to enable debug output */
-
-/***********************************************************************
-F* Function: int board_postclk_init (void) P*A*Z*
- *
-P* Parameters: none
-P*
-P* Returnvalue: int
-P* - 0 is always returned.
- *
-Z* Intention: This function is the board_postclk_init() method implementation
-Z* for the lwmon board.
- *
- ***********************************************************************/
-int board_postclk_init (void)
-{
- kbd_init();
-
- return (0);
-}
-
-static void kbd_init (void)
-{
- uchar kbd_data[KEYBD_DATALEN];
- uchar tmp_data[KEYBD_DATALEN];
- uchar val, errcd;
- int i;
-
- i2c_set_bus_num(0);
-
- gd->arch.kbd_status = 0;
-
- /* Forced by PIC. Delays <= 175us loose */
- udelay(1000);
-
- /* Read initial keyboard error code */
- val = KEYBD_CMD_READ_STATUS;
- i2c_write (kbd_addr, 0, 0, &val, 1);
- i2c_read (kbd_addr, 0, 0, &errcd, 1);
- /* clear unused bits */
- errcd &= KEYBD_STATUS_MASK;
- /* clear "irrelevant" bits. Recommended by Martin Rajek, LWN */
- errcd &= ~(KEYBD_STATUS_H_RESET|KEYBD_STATUS_BROWNOUT);
- if (errcd) {
- gd->arch.kbd_status |= errcd << 8;
- }
- /* Reset error code and verify */
- val = KEYBD_CMD_RESET_ERRORS;
- i2c_write (kbd_addr, 0, 0, &val, 1);
- udelay(1000); /* delay NEEDED by keyboard PIC !!! */
-
- val = KEYBD_CMD_READ_STATUS;
- i2c_write (kbd_addr, 0, 0, &val, 1);
- i2c_read (kbd_addr, 0, 0, &val, 1);
-
- val &= KEYBD_STATUS_MASK; /* clear unused bits */
- if (val) { /* permanent error, report it */
- gd->arch.kbd_status |= val;
- return;
- }
-
- /*
- * Read current keyboard state.
- *
- * After the error reset it may take some time before the
- * keyboard PIC picks up a valid keyboard scan - the total
- * scan time is approx. 1.6 ms (information by Martin Rajek,
- * 28 Sep 2002). We read a couple of times for the keyboard
- * to stabilize, using a big enough delay.
- * 10 times should be enough. If the data is still changing,
- * we use what we get :-(
- */
-
- memset (tmp_data, 0xFF, KEYBD_DATALEN); /* impossible value */
- for (i=0; i<10; ++i) {
- val = KEYBD_CMD_READ_KEYS;
- i2c_write (kbd_addr, 0, 0, &val, 1);
- i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN);
-
- if (memcmp(kbd_data, tmp_data, KEYBD_DATALEN) == 0) {
- /* consistent state, done */
- break;
- }
- /* remeber last state, delay, and retry */
- memcpy (tmp_data, kbd_data, KEYBD_DATALEN);
- udelay (5000);
- }
-}
-
-
-/* Read a register from the dsPIC. */
-int _dspic_read(ushort reg, ushort *data)
-{
- uchar buf[sizeof(*data)];
- int rval;
-
- if (i2c_read(dspic_addr, reg, 2, buf, 2))
- return -1;
-
- rval = i2c_read(dspic_addr, reg, sizeof(reg), buf, sizeof(*data));
- *data = (buf[0] << 8) | buf[1];
-
- return rval;
-}
-
-
-/***********************************************************************
-F* Function: int misc_init_r (void) P*A*Z*
- *
-P* Parameters: none
-P*
-P* Returnvalue: int
-P* - 0 is always returned, even in the case of a keyboard
-P* error.
- *
-Z* Intention: This function is the misc_init_r() method implementation
-Z* for the lwmon board.
-Z* The keyboard controller is initialized and the result
-Z* of a read copied to the environment variable "keybd".
-Z* If KEYBD_SET_DEBUGMODE is defined, a check is made for
-Z* this key, and if found display to the LCD will be enabled.
-Z* The keys in "keybd" are checked against the magic
-Z* keycommands defined in the environment.
-Z* See also key_match().
- *
-D* Design: wd@denx.de
-C* Coding: wd@denx.de
-V* Verification: dzu@denx.de
- ***********************************************************************/
-int misc_init_r_kbd (void)
-{
- uchar kbd_data[KEYBD_DATALEN];
- char keybd_env[2 * KEYBD_DATALEN + 1];
- uchar kbd_init_status = gd->arch.kbd_status >> 8;
- uchar kbd_status = gd->arch.kbd_status;
- uchar val;
- ushort data, inv_data;
- char *str;
- int i;
-
- if (kbd_init_status) {
- printf ("KEYBD: Error %02X\n", kbd_init_status);
- }
- if (kbd_status) { /* permanent error, report it */
- printf ("*** Keyboard error code %02X ***\n", kbd_status);
- sprintf (keybd_env, "%02X", kbd_status);
- setenv ("keybd", keybd_env);
- return 0;
- }
-
- /*
- * Now we know that we have a working keyboard, so disable
- * all output to the LCD except when a key press is detected.
- */
-
- if ((console_assign (stdout, "serial") < 0) ||
- (console_assign (stderr, "serial") < 0)) {
- printf ("Can't assign serial port as output device\n");
- }
-
- /* Read Version */
- val = KEYBD_CMD_READ_VERSION;
- i2c_write (kbd_addr, 0, 0, &val, 1);
- i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_VERSIONLEN);
- printf ("KEYBD: Version %d.%d\n", kbd_data[0], kbd_data[1]);
-
- /* Read current keyboard state */
- val = KEYBD_CMD_READ_KEYS;
- i2c_write (kbd_addr, 0, 0, &val, 1);
- i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN);
-
- /* read out start key from bse01 received via can */
- _dspic_read(DSPIC_PON_STATUS_REG, &data);
- /* check highbyte from status register */
- if (data > 0xFF) {
- _dspic_read(DSPIC_PON_INV_STATUS_REG, &inv_data);
-
- /* check inverse data */
- if ((data+inv_data) == 0xFFFF) {
- /* don't overwrite local key */
- if (kbd_data[1] == 0) {
- /* read key value */
- _dspic_read(DSPIC_PON_KEY_REG, &data);
- str = (char *)&data;
- /* swap bytes */
- kbd_data[1] = str[1];
- kbd_data[2] = str[0];
- printf("CAN received startkey: 0x%X\n", data);
- }
- }
- }
-
- for (i = 0; i < KEYBD_DATALEN; ++i) {
- sprintf (keybd_env + i + i, "%02X", kbd_data[i]);
- }
-
- setenv ("keybd", keybd_env);
-
- str = strdup ((char *)key_match (kbd_data)); /* decode keys */
-#ifdef KEYBD_SET_DEBUGMODE
- if (kbd_data[0] == KEYBD_SET_DEBUGMODE) { /* set debug mode */
- if ((console_assign (stdout, "lcd") < 0) ||
- (console_assign (stderr, "lcd") < 0)) {
- printf ("Can't assign LCD display as output device\n");
- }
- }
-#endif /* KEYBD_SET_DEBUGMODE */
-#ifdef CONFIG_PREBOOT /* automatically configure "preboot" command on key match */
- setenv ("preboot", str); /* set or delete definition */
-#endif /* CONFIG_PREBOOT */
- if (str != NULL) {
- free (str);
- }
- return (0);
-}
-
-#ifdef CONFIG_PREBOOT
-
-static uchar kbd_magic_prefix[] = "key_magic";
-static uchar kbd_command_prefix[] = "key_cmd";
-
-static int compare_magic (uchar *kbd_data, uchar *str)
-{
- uchar compare[KEYBD_DATALEN-1];
- char *nxt;
- int i;
-
- /* Don't include modifier byte */
- memcpy (compare, kbd_data+1, KEYBD_DATALEN-1);
-
- for (; str != NULL; str = (*nxt) ? (uchar *)(nxt+1) : (uchar *)nxt) {
- uchar c;
- int k;
-
- c = (uchar) simple_strtoul ((char *)str, (char **) (&nxt), 16);
-
- if (str == (uchar *)nxt) { /* invalid character */
- break;
- }
-
- /*
- * Check if this key matches the input.
- * Set matches to zero, so they match only once
- * and we can find duplicates or extra keys
- */
- for (k = 0; k < sizeof(compare); ++k) {
- if (compare[k] == '\0') /* only non-zero entries */
- continue;
- if (c == compare[k]) { /* found matching key */
- compare[k] = '\0';
- break;
- }
- }
- if (k == sizeof(compare)) {
- return -1; /* unmatched key */
- }
- }
-
- /*
- * A full match leaves no keys in the `compare' array,
- */
- for (i = 0; i < sizeof(compare); ++i) {
- if (compare[i])
- {
- return -1;
- }
- }
-
- return 0;
-}
-
-/***********************************************************************
-F* Function: static uchar *key_match (uchar *kbd_data) P*A*Z*
- *
-P* Parameters: uchar *kbd_data
-P* - The keys to match against our magic definitions
-P*
-P* Returnvalue: uchar *
-P* - != NULL: Pointer to the corresponding command(s)
-P* NULL: No magic is about to happen
- *
-Z* Intention: Check if pressed key(s) match magic sequence,
-Z* and return the command string associated with that key(s).
-Z*
-Z* If no key press was decoded, NULL is returned.
-Z*
-Z* Note: the first character of the argument will be
-Z* overwritten with the "magic charcter code" of the
-Z* decoded key(s), or '\0'.
-Z*
-Z* Note: the string points to static environment data
-Z* and must be saved before you call any function that
-Z* modifies the environment.
- *
-D* Design: wd@denx.de
-C* Coding: wd@denx.de
-V* Verification: dzu@denx.de
- ***********************************************************************/
-static uchar *key_match (uchar *kbd_data)
-{
- char magic[sizeof (kbd_magic_prefix) + 1];
- uchar *suffix;
- char *kbd_magic_keys;
-
- /*
- * The following string defines the characters that can pe appended
- * to "key_magic" to form the names of environment variables that
- * hold "magic" key codes, i. e. such key codes that can cause
- * pre-boot actions. If the string is empty (""), then only
- * "key_magic" is checked (old behaviour); the string "125" causes
- * checks for "key_magic1", "key_magic2" and "key_magic5", etc.
- */
- if ((kbd_magic_keys = getenv ("magic_keys")) == NULL)
- kbd_magic_keys = "";
-
- /* loop over all magic keys;
- * use '\0' suffix in case of empty string
- */
- for (suffix=(uchar *)kbd_magic_keys; *suffix || suffix==(uchar *)kbd_magic_keys; ++suffix) {
- sprintf (magic, "%s%c", kbd_magic_prefix, *suffix);
- debug ("### Check magic \"%s\"\n", magic);
- if (compare_magic(kbd_data, (uchar *)getenv(magic)) == 0) {
- char cmd_name[sizeof (kbd_command_prefix) + 1];
- char *cmd;
-
- sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix);
-
- cmd = getenv (cmd_name);
- debug ("### Set PREBOOT to $(%s): \"%s\"\n",
- cmd_name, cmd ? cmd : "<<NULL>>");
- *kbd_data = *suffix;
- return ((uchar *)cmd);
- }
- }
- debug ("### Delete PREBOOT\n");
- *kbd_data = '\0';
- return (NULL);
-}
-#endif /* CONFIG_PREBOOT */
-
-/***********************************************************************
-F* Function: int do_kbd (cmd_tbl_t *cmdtp, int flag,
-F* int argc, char * const argv[]) P*A*Z*
- *
-P* Parameters: cmd_tbl_t *cmdtp
-P* - Pointer to our command table entry
-P* int flag
-P* - If the CMD_FLAG_REPEAT bit is set, then this call is
-P* a repetition
-P* int argc
-P* - Argument count
-P* char * const argv[]
-P* - Array of the actual arguments
-P*
-P* Returnvalue: int
-P* - 0 is always returned.
- *
-Z* Intention: Implement the "kbd" command.
-Z* The keyboard status is read. The result is printed on
-Z* the console and written into the "keybd" environment
-Z* variable.
- *
-D* Design: wd@denx.de
-C* Coding: wd@denx.de
-V* Verification: dzu@denx.de
- ***********************************************************************/
-int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- uchar kbd_data[KEYBD_DATALEN];
- char keybd_env[2 * KEYBD_DATALEN + 1];
- uchar val;
- int i;
-
-#if 0 /* Done in kbd_init */
- i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-#endif
-
- /* Read keys */
- val = KEYBD_CMD_READ_KEYS;
- i2c_write (kbd_addr, 0, 0, &val, 1);
- i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN);
-
- puts ("Keys:");
- for (i = 0; i < KEYBD_DATALEN; ++i) {
- sprintf (keybd_env + i + i, "%02X", kbd_data[i]);
- printf (" %02x", kbd_data[i]);
- }
- putc ('\n');
- setenv ("keybd", keybd_env);
- return 0;
-}
-
-U_BOOT_CMD(
- kbd, 1, 1, do_kbd,
- "read keyboard status",
- ""
-);
-
-/*----------------------------- Utilities -----------------------------*/
-
-#ifdef CONFIG_POST
-/*
- * Returns 1 if keys pressed to start the power-on long-running tests
- * Called from board_init_f().
- */
-int post_hotkeys_pressed(void)
-{
- uchar kbd_data[KEYBD_DATALEN];
- uchar val;
-
- /* Read keys */
- val = KEYBD_CMD_READ_KEYS;
- i2c_write (kbd_addr, 0, 0, &val, 1);
- i2c_read (kbd_addr, 0, 0, kbd_data, KEYBD_DATALEN);
-
- return (compare_magic(kbd_data, (uchar *)CONFIG_POST_KEY_MAGIC) == 0);
-}
-#endif
diff --git a/board/liebherr/lwmon5/lwmon5.c b/board/liebherr/lwmon5/lwmon5.c
deleted file mode 100644
index bb99a3b90f3..00000000000
--- a/board/liebherr/lwmon5/lwmon5.c
+++ /dev/null
@@ -1,551 +0,0 @@
-/*
- * (C) Copyright 2007-2013
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/ppc440.h>
-#include <asm/processor.h>
-#include <asm/ppc4xx-gpio.h>
-#include <asm/io.h>
-#include <post.h>
-#include <flash.h>
-#include <video.h>
-#include <mtd/cfi_flash.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static phys_addr_t lwmon5_cfi_flash_bank_addr[2] = CONFIG_SYS_FLASH_BANKS_LIST;
-
-ulong flash_get_size(ulong base, int banknum);
-int misc_init_r_kbd(void);
-
-int board_early_init_f(void)
-{
- u32 sdr0_pfc1, sdr0_pfc2;
- u32 reg;
-
- /* PLB Write pipelining disabled. Denali Core workaround */
- mtdcr(PLB4A0_ACR, 0xDE000000);
- mtdcr(PLB4A1_ACR, 0xDE000000);
-
- /*--------------------------------------------------------------------
- * Setup the interrupt controller polarities, triggers, etc.
- *-------------------------------------------------------------------*/
- mtdcr(UIC0SR, 0xffffffff); /* clear all. if write with 1 then the status is cleared */
- mtdcr(UIC0ER, 0x00000000); /* disable all */
- mtdcr(UIC0CR, 0x00000000); /* we have not critical interrupts at the moment */
- mtdcr(UIC0PR, 0xFFBFF1EF); /* Adjustment of the polarity */
- mtdcr(UIC0TR, 0x00000900); /* per ref-board manual */
- mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */
- mtdcr(UIC0SR, 0xffffffff); /* clear all */
-
- mtdcr(UIC1SR, 0xffffffff); /* clear all */
- mtdcr(UIC1ER, 0x00000000); /* disable all */
- mtdcr(UIC1CR, 0x00000000); /* all non-critical */
- mtdcr(UIC1PR, 0xFFFFC6A5); /* Adjustment of the polarity */
- mtdcr(UIC1TR, 0x60000040); /* per ref-board manual */
- mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */
- mtdcr(UIC1SR, 0xffffffff); /* clear all */
-
- mtdcr(UIC2SR, 0xffffffff); /* clear all */
- mtdcr(UIC2ER, 0x00000000); /* disable all */
- mtdcr(UIC2CR, 0x00000000); /* all non-critical */
- mtdcr(UIC2PR, 0x27C00000); /* Adjustment of the polarity */
- mtdcr(UIC2TR, 0x3C000000); /* per ref-board manual */
- mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 is within DDRAM */
- mtdcr(UIC2SR, 0xffffffff); /* clear all */
-
- /* Trace Pins are disabled. SDR0_PFC0 Register */
- mtsdr(SDR0_PFC0, 0x0);
-
- /* select Ethernet pins */
- mfsdr(SDR0_PFC1, sdr0_pfc1);
- /* SMII via ZMII */
- sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) |
- SDR0_PFC1_SELECT_CONFIG_6;
- mfsdr(SDR0_PFC2, sdr0_pfc2);
- sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) |
- SDR0_PFC2_SELECT_CONFIG_6;
-
- /* enable SPI (SCP) */
- sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_SCP_SEL;
-
- mtsdr(SDR0_PFC2, sdr0_pfc2);
- mtsdr(SDR0_PFC1, sdr0_pfc1);
-
- mtsdr(SDR0_PFC4, 0x80000000);
-
- /* PCI arbiter disabled */
- /* PCI Host Configuration disbaled */
- mfsdr(SDR0_PCI0, reg);
- reg = 0;
- mtsdr(SDR0_PCI0, 0x00000000 | reg);
-
- gpio_write_bit(CONFIG_SYS_GPIO_FLASH_WP, 1);
-
-#if CONFIG_POST & CONFIG_SYS_POST_BSPEC1
- /* enable the LSB transmitter */
- gpio_write_bit(CONFIG_SYS_GPIO_LSB_ENABLE, 1);
- /* enable the CAN transmitter */
- gpio_write_bit(CONFIG_SYS_GPIO_CAN_ENABLE, 1);
-
- reg = 0; /* reuse as counter */
- out_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR,
- in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR)
- & ~CONFIG_SYS_DSPIC_TEST_MASK);
- while (gpio_read_in_bit(CONFIG_SYS_GPIO_DSPIC_READY) && reg++ < 1000) {
- udelay(1000);
- }
- if (gpio_read_in_bit(CONFIG_SYS_GPIO_DSPIC_READY)) {
- /* set "boot error" flag */
- out_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR,
- in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR) |
- CONFIG_SYS_DSPIC_TEST_MASK);
- }
-#endif
-
- /*
- * Reset PHY's:
- * The PHY's need a 2nd reset pulse, since the MDIO address is latched
- * upon reset, and with the first reset upon powerup, the addresses are
- * not latched reliable, since the IRQ line is multiplexed with an
- * MDIO address. A 2nd reset at this time will make sure, that the
- * correct address is latched.
- */
- gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 1);
- gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 1);
- udelay(1000);
- gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 0);
- gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 0);
- udelay(1000);
- gpio_write_bit(CONFIG_SYS_GPIO_PHY0_RST, 1);
- gpio_write_bit(CONFIG_SYS_GPIO_PHY1_RST, 1);
-
- return 0;
-}
-
-/*
- * Override weak default with board specific version
- */
-phys_addr_t cfi_flash_bank_addr(int bank)
-{
- return lwmon5_cfi_flash_bank_addr[bank];
-}
-
-/*
- * Override the weak default mapping function with a board specific one
- */
-u32 flash_get_bank_size(int cs, int idx)
-{
- return flash_info[idx].size;
-}
-
-int board_early_init_r(void)
-{
- u32 val0, val1;
-
- /*
- * lwmon5 is manufactured in 2 different board versions:
- * The lwmon5a board has 64MiB NOR flash instead of the
- * 128MiB of the original lwmon5. Unfortunately the CFI driver
- * will report 2 banks of 64MiB even for the smaller flash
- * chip, since the bank is mirrored. To fix this, we bring
- * one bank into CFI query mode and read its response. This
- * enables us to detect the real number of flash devices/
- * banks which will be used later on by the common CFI driver.
- */
-
- /* Put bank 0 into CFI command mode and read */
- out_be32((void *)CONFIG_SYS_FLASH0, 0x00980098);
- val0 = in_be32((void *)CONFIG_SYS_FLASH0 + FLASH_OFFSET_CFI_RESP);
- val1 = in_be32((void *)CONFIG_SYS_FLASH1 + FLASH_OFFSET_CFI_RESP);
-
- /* Reset flash again out of query mode */
- out_be32((void *)CONFIG_SYS_FLASH0, 0x00f000f0);
-
- /* When not identical, we have 2 different flash devices/banks */
- if (val0 != val1)
- return 0;
-
- /*
- * Now we're sure that we're running on a LWMON5a board with
- * only 64MiB NOR flash in one bank:
- *
- * Set flash base address and bank count for CFI driver probing.
- */
- cfi_flash_num_flash_banks = 1;
- lwmon5_cfi_flash_bank_addr[0] = CONFIG_SYS_FLASH0;
-
- return 0;
-}
-
-int misc_init_r(void)
-{
- u32 pbcr;
- int size_val = 0;
- u32 reg;
- unsigned long usb2d0cr = 0;
- unsigned long usb2phy0cr, usb2h0cr = 0;
- unsigned long sdr0_pfc1, sdr0_srst;
-
- /*
- * FLASH stuff...
- */
-
- /* Re-do sizing to get full correct info */
-
- /* adjust flash start and offset */
- gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
- gd->bd->bi_flashoffset = 0;
-
- mfebc(PB0CR, pbcr);
- size_val = ffs(gd->bd->bi_flashsize) - 21;
- pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
- mtebc(PB0CR, pbcr);
-
- /*
- * Re-check to get correct base address
- */
- flash_get_size(gd->bd->bi_flashstart, 0);
-
- /* Monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET, -CONFIG_SYS_MONITOR_LEN, 0xffffffff,
- &flash_info[cfi_flash_num_flash_banks - 1]);
-
- /* Env protection ON by default */
- flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND,
- CONFIG_ENV_ADDR_REDUND + 2 * CONFIG_ENV_SECT_SIZE - 1,
- &flash_info[cfi_flash_num_flash_banks - 1]);
-
- /*
- * USB suff...
- */
-
- /* Reset USB */
- /* Reset of USB2PHY0 must be active at least 10 us */
- mtsdr(SDR0_SRST0, SDR0_SRST0_USB2H | SDR0_SRST0_USB2D);
- udelay(2000);
-
- mtsdr(SDR0_SRST1, SDR0_SRST1_USB20PHY | SDR0_SRST1_USB2HUTMI |
- SDR0_SRST1_USB2HPHY | SDR0_SRST1_OPBA2 |
- SDR0_SRST1_PLB42OPB1 | SDR0_SRST1_OPB2PLB40);
- udelay(2000);
-
- /* Errata CHIP_6 */
-
- /* 1. Set internal PHY configuration */
- /* SDR Setting */
- mfsdr(SDR0_PFC1, sdr0_pfc1);
- mfsdr(SDR0_USB0, usb2d0cr);
- mfsdr(SDR0_USB2PHY0CR, usb2phy0cr);
- mfsdr(SDR0_USB2H0CR, usb2h0cr);
-
- usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_XOCLK_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; /*0*/
- usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_WDINT_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; /*1*/
- usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DVBUS_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN; /*1*/
- usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_DWNSTR_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; /*1*/
- usb2phy0cr = usb2phy0cr & ~SDR0_USB2PHY0CR_UTMICN_MASK;
- usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; /*1*/
-
- /*
- * An 8-bit/60MHz interface is the only possible alternative
- * when connecting the Device to the PHY
- */
- usb2h0cr = usb2h0cr & ~SDR0_USB2H0CR_WDINT_MASK;
- usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; /*1*/
-
- mtsdr(SDR0_PFC1, sdr0_pfc1);
- mtsdr(SDR0_USB0, usb2d0cr);
- mtsdr(SDR0_USB2PHY0CR, usb2phy0cr);
- mtsdr(SDR0_USB2H0CR, usb2h0cr);
-
- /* 2. De-assert internal PHY reset */
- mfsdr(SDR0_SRST1, sdr0_srst);
- sdr0_srst = sdr0_srst & ~SDR0_SRST1_USB20PHY;
- mtsdr(SDR0_SRST1, sdr0_srst);
-
- /* 3. Wait for more than 1 ms */
- udelay(2000);
-
- /* 4. De-assert USB 2.0 Host main reset */
- mfsdr(SDR0_SRST0, sdr0_srst);
- sdr0_srst = sdr0_srst &~ SDR0_SRST0_USB2H;
- mtsdr(SDR0_SRST0, sdr0_srst);
- udelay(1000);
-
- /* 5. De-assert reset of OPB2 cores */
- mfsdr(SDR0_SRST1, sdr0_srst);
- sdr0_srst = sdr0_srst &~ SDR0_SRST1_PLB42OPB1;
- sdr0_srst = sdr0_srst &~ SDR0_SRST1_OPB2PLB40;
- sdr0_srst = sdr0_srst &~ SDR0_SRST1_OPBA2;
- mtsdr(SDR0_SRST1, sdr0_srst);
- udelay(1000);
-
- /* 6. Set EHCI Configure FLAG */
-
- /* 7. Reassert internal PHY reset: */
- mtsdr(SDR0_SRST1, SDR0_SRST1_USB20PHY);
- udelay(1000);
-
- /*
- * Clear resets
- */
- mtsdr(SDR0_SRST1, 0x00000000);
- mtsdr(SDR0_SRST0, 0x00000000);
-
- printf("USB: Host(int phy) Device(ext phy)\n");
-
- /*
- * Clear PLB4A0_ACR[WRP]
- * This fix will make the MAL burst disabling patch for the Linux
- * EMAC driver obsolete.
- */
- reg = mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_WRP_MASK;
- mtdcr(PLB4A0_ACR, reg);
-
- /*
- * Init matrix keyboard
- */
- misc_init_r_kbd();
-
- return 0;
-}
-
-int checkboard(void)
-{
- char buf[64];
- int i = getenv_f("serial#", buf, sizeof(buf));
-
- printf("Board: %s", __stringify(CONFIG_HOSTNAME));
-
- if (i > 0) {
- puts(", serial# ");
- puts(buf);
- }
- putc('\n');
-
- return (0);
-}
-
-void hw_watchdog_reset(void)
-{
- int val;
-#if defined(CONFIG_WD_MAX_RATE)
- unsigned long long ct = get_ticks();
-
- /*
- * Don't allow watch-dog triggering more frequently than
- * the predefined value CONFIG_WD_MAX_RATE [ticks].
- */
- if (ct >= gd->arch.wdt_last) {
- if ((ct - gd->arch.wdt_last) < CONFIG_WD_MAX_RATE)
- return;
- } else {
- /* Time base counter had been reset */
- if (((unsigned long long)(-1) - gd->arch.wdt_last + ct) <
- CONFIG_WD_MAX_RATE)
- return;
- }
- gd->arch.wdt_last = get_ticks();
-#endif
-
- /*
- * Toggle watchdog output
- */
- val = gpio_read_out_bit(CONFIG_SYS_GPIO_WATCHDOG) == 0 ? 1 : 0;
- gpio_write_bit(CONFIG_SYS_GPIO_WATCHDOG, val);
-}
-
-int do_eeprom_wp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- if (argc < 2)
- return cmd_usage(cmdtp);
-
- if ((strcmp(argv[1], "on") == 0))
- gpio_write_bit(CONFIG_SYS_GPIO_EEPROM_EXT_WP, 1);
- else if ((strcmp(argv[1], "off") == 0))
- gpio_write_bit(CONFIG_SYS_GPIO_EEPROM_EXT_WP, 0);
- else
- return cmd_usage(cmdtp);
-
- return 0;
-}
-
-U_BOOT_CMD(
- eepromwp, 2, 0, do_eeprom_wp,
- "eeprom write protect off/on",
- "<on|off> - enable (on) or disable (off) I2C EEPROM write protect"
-);
-
-#if defined(CONFIG_VIDEO)
-#include <video_fb.h>
-#include <mb862xx.h>
-
-extern GraphicDevice mb862xx;
-
-static const gdc_regs init_regs [] = {
- { 0x0100, 0x00000f00 },
- { 0x0020, 0x801401df },
- { 0x0024, 0x00000000 },
- { 0x0028, 0x00000000 },
- { 0x002c, 0x00000000 },
- { 0x0110, 0x00000000 },
- { 0x0114, 0x00000000 },
- { 0x0118, 0x01df0280 },
- { 0x0004, 0x031f0000 },
- { 0x0008, 0x027f027f },
- { 0x000c, 0x015f028f },
- { 0x0010, 0x020c0000 },
- { 0x0014, 0x01df01ea },
- { 0x0018, 0x00000000 },
- { 0x001c, 0x01e00280 },
- { 0x0100, 0x80010f00 },
- { 0x0, 0x0 }
-};
-
-const gdc_regs *board_get_regs(void)
-{
- return init_regs;
-}
-
-/* Returns Lime base address */
-unsigned int board_video_init(void)
-{
- /*
- * Reset Lime controller
- */
- gpio_write_bit(CONFIG_SYS_GPIO_LIME_S, 1);
- udelay(500);
- gpio_write_bit(CONFIG_SYS_GPIO_LIME_RST, 1);
-
- mb862xx.winSizeX = 640;
- mb862xx.winSizeY = 480;
- mb862xx.gdfBytesPP = 2;
- mb862xx.gdfIndex = GDF_15BIT_555RGB;
-
- return CONFIG_SYS_LIME_BASE_0;
-}
-
-#define DEFAULT_BRIGHTNESS 0x64
-
-static void board_backlight_brightness(int brightness)
-{
- if (brightness > 0) {
- /* pwm duty, lamp on */
- out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000024), brightness);
- out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000020), 0x701);
- } else {
- /* lamp off */
- out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000024), 0x00);
- out_be32((void *)(CONFIG_SYS_FPGA_BASE_0 + 0x00000020), 0x00);
- }
-}
-
-void board_backlight_switch(int flag)
-{
- char * param;
- int rc;
-
- if (flag) {
- param = getenv("brightness");
- rc = param ? simple_strtol(param, NULL, 10) : -1;
- if (rc < 0)
- rc = DEFAULT_BRIGHTNESS;
- } else {
- rc = 0;
- }
- board_backlight_brightness(rc);
-}
-
-#if defined(CONFIG_CONSOLE_EXTRA_INFO)
-/*
- * Return text to be printed besides the logo.
- */
-void video_get_info_str(int line_number, char *info)
-{
- if (line_number == 1)
- strcpy(info, " Board: Lwmon5 (Liebherr Elektronik GmbH)");
- else
- info [0] = '\0';
-}
-#endif /* CONFIG_CONSOLE_EXTRA_INFO */
-#endif /* CONFIG_VIDEO */
-
-void board_reset(void)
-{
- gpio_write_bit(CONFIG_SYS_GPIO_BOARD_RESET, 1);
-}
-
-#ifdef CONFIG_SPL_OS_BOOT
-/*
- * lwmon5 specific implementation of spl_start_uboot()
- *
- * RETURN
- * 0 if booting into OS is selected (default)
- * 1 if booting into U-Boot is selected
- */
-int spl_start_uboot(void)
-{
- char s[8];
-
- env_init();
- getenv_f("boot_os", s, sizeof(s));
- if ((s != NULL) && (strcmp(s, "yes") == 0))
- return 0;
-
- return 1;
-}
-
-/*
- * This function is called from the SPL U-Boot version for
- * early init stuff, that needs to be done for OS (e.g. Linux)
- * booting. Doing it later in the real U-Boot would not work
- * in case that the SPL U-Boot boots Linux directly.
- */
-void spl_board_init(void)
-{
- const gdc_regs *regs = board_get_regs();
-
- /*
- * Setup PFC registers, mainly for ethernet support
- * later on in Linux
- */
- board_early_init_f();
-
- /* enable the LSB transmitter */
- gpio_write_bit(CONFIG_SYS_GPIO_LSB_ENABLE, 1);
-
- /*
- * Clear resets
- */
- mtsdr(SDR0_SRST1, 0x00000000);
- mtsdr(SDR0_SRST0, 0x00000000);
-
- /*
- * Reset Lime controller
- */
- gpio_write_bit(CONFIG_SYS_GPIO_LIME_S, 1);
- udelay(500);
- gpio_write_bit(CONFIG_SYS_GPIO_LIME_RST, 1);
-
- out_be32((void *)CONFIG_SYS_LIME_SDRAM_CLOCK, CONFIG_SYS_MB862xx_CCF);
- udelay(300);
- out_be32((void *)CONFIG_SYS_LIME_MMR, CONFIG_SYS_MB862xx_MMR);
-
- while (regs->index) {
- out_be32((void *)(CONFIG_SYS_LIME_BASE_0 + GC_DISP_BASE) +
- regs->index, regs->value);
- regs++;
- }
-
- board_backlight_brightness(DEFAULT_BRIGHTNESS);
-}
-#endif
diff --git a/board/liebherr/lwmon5/sdram.c b/board/liebherr/lwmon5/sdram.c
deleted file mode 100644
index 4a65d74443c..00000000000
--- a/board/liebherr/lwmon5/sdram.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * (C) Copyright 2006
- * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com
- * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com
- * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
- * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
- *
- * (C) Copyright 2007-2013
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/io.h>
-#include <asm/cache.h>
-#include <asm/ppc440.h>
-#include <watchdog.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
- * region. Right now the cache should still be disabled in U-Boot because of the
- * EMAC driver, that need it's buffer descriptor to be located in non cached
- * memory.
- *
- * If at some time this restriction doesn't apply anymore, just define
- * CONFIG_4xx_DCACHE in the board config file and this code should setup
- * everything correctly.
- */
-#ifdef CONFIG_4xx_DCACHE
-#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */
-#else
-#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
-#endif
-
-/*-----------------------------------------------------------------------------+
- * Prototypes
- *-----------------------------------------------------------------------------*/
-extern int denali_wait_for_dlllock(void);
-extern void denali_core_search_data_eye(void);
-extern void dcbz_area(u32 start_address, u32 num_bytes);
-
-static u32 is_ecc_enabled(void)
-{
- u32 val;
-
- mfsdram(DDR0_22, val);
- val &= DDR0_22_CTRL_RAW_MASK;
- if (val)
- return 1;
- else
- return 0;
-}
-
-void board_add_ram_info(int use_default)
-{
- PPC4xx_SYS_INFO board_cfg;
- u32 val;
-
- if (is_ecc_enabled())
- puts(" (ECC");
- else
- puts(" (ECC not");
-
- get_sys_info(&board_cfg);
- printf(" enabled, %ld MHz", (board_cfg.freqPLB * 2) / 1000000);
-
- mfsdram(DDR0_03, val);
- val = DDR0_03_CASLAT_DECODE(val);
- printf(", CL%d)", val);
-}
-
-#ifdef CONFIG_DDR_ECC
-static void wait_ddr_idle(void)
-{
- /*
- * Controller idle status cannot be determined for Denali
- * DDR2 code. Just return here.
- */
-}
-
-static void program_ecc(u32 start_address,
- u32 num_bytes,
- u32 tlb_word2_i_value)
-{
- u32 val;
- u32 current_addr = start_address;
- u32 size;
- int bytes_remaining;
-
- sync();
- wait_ddr_idle();
-
- /*
- * Because of 440EPx errata CHIP 11, we don't touch the last 256
- * bytes of SDRAM.
- */
- bytes_remaining = num_bytes - CONFIG_SYS_MEM_TOP_HIDE;
-
- /*
- * We have to write the ECC bytes by zeroing and flushing in smaller
- * steps, since the whole 256MByte takes too long for the external
- * watchdog.
- */
- while (bytes_remaining > 0) {
- size = min((64 << 20), bytes_remaining);
-
- /* Write zero's to SDRAM */
- dcbz_area(current_addr, size);
-
- /* Write modified dcache lines back to memory */
- clean_dcache_range(current_addr, current_addr + size);
-
- current_addr += 64 << 20;
- bytes_remaining -= 64 << 20;
- WATCHDOG_RESET();
- }
-
- sync();
- wait_ddr_idle();
-
- /* Clear error status */
- mfsdram(DDR0_00, val);
- mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL);
-
- /* Set 'int_mask' parameter to functionnal value */
- mfsdram(DDR0_01, val);
- mtsdram(DDR0_01, ((val &~ DDR0_01_INT_MASK_MASK) | DDR0_01_INT_MASK_ALL_OFF));
-
- sync();
- wait_ddr_idle();
-}
-#endif
-
-/*************************************************************************
- *
- * dram_init -- 440EPx's DDR controller is a DENALI Core
- *
- ************************************************************************/
-int dram_init(void)
-{
- /* CL=4 */
- mtsdram(DDR0_02, 0x00000000);
-
- mtsdram(DDR0_00, 0x0000190A);
- mtsdram(DDR0_01, 0x01000000);
- mtsdram(DDR0_03, 0x02040803); /* A suitable burst length was taken. CAS is right for our board */
-
- mtsdram(DDR0_04, 0x0B030300);
- mtsdram(DDR0_05, 0x02020308);
- mtsdram(DDR0_06, 0x0003C812);
- mtsdram(DDR0_07, 0x00090100);
- mtsdram(DDR0_08, 0x03c80001);
- mtsdram(DDR0_09, 0x00011D5F);
- mtsdram(DDR0_10, 0x00000100);
- mtsdram(DDR0_11, 0x000CC800);
- mtsdram(DDR0_12, 0x00000003);
- mtsdram(DDR0_14, 0x00000000);
- mtsdram(DDR0_17, 0x1e000000);
- mtsdram(DDR0_18, 0x1e1e1e1e);
- mtsdram(DDR0_19, 0x1e1e1e1e);
- mtsdram(DDR0_20, 0x0B0B0B0B);
- mtsdram(DDR0_21, 0x0B0B0B0B);
-#ifdef CONFIG_DDR_ECC
- mtsdram(DDR0_22, 0x00267F0B | DDR0_22_CTRL_RAW_ECC_ENABLE); /* enable ECC */
-#else
- mtsdram(DDR0_22, 0x00267F0B);
-#endif
-
- mtsdram(DDR0_23, 0x01000000);
- mtsdram(DDR0_24, 0x01010001);
-
- mtsdram(DDR0_26, 0x2D93028A);
- mtsdram(DDR0_27, 0x0784682B);
-
- mtsdram(DDR0_28, 0x00000080);
- mtsdram(DDR0_31, 0x00000000);
- mtsdram(DDR0_42, 0x01000008);
-
- mtsdram(DDR0_43, 0x050A0200);
- mtsdram(DDR0_44, 0x00000005);
- mtsdram(DDR0_02, 0x00000001); /* Activate the denali core */
-
- denali_wait_for_dlllock();
-
-#if defined(CONFIG_DDR_DATA_EYE)
- /* -----------------------------------------------------------+
- * Perform data eye search if requested.
- * ----------------------------------------------------------*/
- program_tlb(0, CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20,
- TLB_WORD2_I_ENABLE);
- denali_core_search_data_eye();
- remove_tlb(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20);
-#endif
-
- /*
- * Program tlb entries for this size (dynamic)
- */
- program_tlb(0, CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20,
- MY_TLB_WORD2_I_ENABLE);
-
-#if defined(CONFIG_DDR_ECC)
-#if defined(CONFIG_4xx_DCACHE)
- /*
- * If ECC is enabled, initialize the parity bits.
- */
- program_ecc(0, CONFIG_SYS_MBYTES_SDRAM << 20, 0);
-#else /* CONFIG_4xx_DCACHE */
- /*
- * Setup 2nd TLB with same physical address but different virtual address
- * with cache enabled. This is done for fast ECC generation.
- */
- program_tlb(0, CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20, 0);
-
- /*
- * If ECC is enabled, initialize the parity bits.
- */
- program_ecc(CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20, 0);
-
- /*
- * Now after initialization (auto-calibration and ECC generation)
- * remove the TLB entries with caches enabled and program again with
- * desired cache functionality
- */
- remove_tlb(CONFIG_SYS_DDR_CACHED_ADDR, CONFIG_SYS_MBYTES_SDRAM << 20);
-#endif /* CONFIG_4xx_DCACHE */
-#endif /* CONFIG_DDR_ECC */
-
- /*
- * Clear possible errors resulting from data-eye-search.
- * If not done, then we could get an interrupt later on when
- * exceptions are enabled.
- */
- set_mcsr(get_mcsr());
-
- gd->ram_size = CONFIG_SYS_MBYTES_SDRAM << 20;
-
- return 0;
-}
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 14:56:36 +0000