diff options
Diffstat (limited to 'board/theobroma-systems')
| -rw-r--r-- | board/theobroma-systems/puma_rk3399/puma-rk3399.c | 58 |
1 files changed, 0 insertions, 58 deletions
diff --git a/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/board/theobroma-systems/puma_rk3399/puma-rk3399.c index c6b509c109c..251cd2d5667 100644 --- a/board/theobroma-systems/puma_rk3399/puma-rk3399.c +++ b/board/theobroma-systems/puma_rk3399/puma-rk3399.c @@ -13,10 +13,8 @@ #include <dm/pinctrl.h> #include <dm/uclass-internal.h> #include <asm/io.h> -#include <asm/gpio.h> #include <asm/setup.h> #include <asm/arch-rockchip/clock.h> -#include <asm/arch-rockchip/cru_rk3399.h> #include <asm/arch-rockchip/hardware.h> #include <asm/arch-rockchip/grf_rk3399.h> #include <asm/arch-rockchip/periph.h> @@ -38,62 +36,6 @@ int board_init(void) return 0; } -static void rk3399_force_power_on_reset(void) -{ - ofnode node; - struct gpio_desc sysreset_gpio; - - debug("%s: trying to force a power-on reset\n", __func__); - - node = ofnode_path("/config"); - if (!ofnode_valid(node)) { - debug("%s: no /config node?\n", __func__); - return; - } - - if (gpio_request_by_name_nodev(node, "sysreset-gpio", 0, - &sysreset_gpio, GPIOD_IS_OUT)) { - debug("%s: could not find a /config/sysreset-gpio\n", __func__); - return; - } - - dm_gpio_set_value(&sysreset_gpio, 1); -} - -void spl_board_init(void) -{ - int ret; - struct rk3399_cru *cru = rockchip_get_cru(); - - /* - * The RK3399 resets only 'almost all logic' (see also in the TRM - * "3.9.4 Global software reset"), when issuing a software reset. - * This may cause issues during boot-up for some configurations of - * the application software stack. - * - * To work around this, we test whether the last reset reason was - * a power-on reset and (if not) issue an overtemp-reset to reset - * the entire module. - * - * While this was previously fixed by modifying the various places - * that could generate a software reset (e.g. U-Boot's sysreset - * driver, the ATF or Linux), we now have it here to ensure that - * we no longer have to track this through the various components. - */ - if (cru->glb_rst_st != 0) - rk3399_force_power_on_reset(); - - /* - * Turning the eMMC and SPI back on (if disabled via the Qseven - * BIOS_ENABLE) signal is done through a always-on regulator). - */ - ret = regulators_enable_boot_on(false); - if (ret) - debug("%s: Cannot enable boot on regulator\n", __func__); - - preloader_console_init(); -} - static void setup_macaddr(void) { #if CONFIG_IS_ENABLED(CMD_NET) |