diff options
Diffstat (limited to 'board/ti')
| -rw-r--r-- | board/ti/am65x/Kconfig | 7 | ||||
| -rw-r--r-- | board/ti/am65x/evm.c | 241 |
2 files changed, 248 insertions, 0 deletions
diff --git a/board/ti/am65x/Kconfig b/board/ti/am65x/Kconfig index 60bb834acae..47b41cd6afe 100644 --- a/board/ti/am65x/Kconfig +++ b/board/ti/am65x/Kconfig @@ -12,6 +12,8 @@ config TARGET_AM654_A53_EVM select ARM64 select SOC_K3_AM6 select SYS_DISABLE_DCACHE_OPS + select BOARD_LATE_INIT + imply TI_I2C_BOARD_DETECT config TARGET_AM654_R5_EVM bool "TI K3 based AM654 EVM running on R5" @@ -21,6 +23,7 @@ config TARGET_AM654_R5_EVM select K3_LOAD_SYSFW select K3_AM654_DDRSS imply SYS_K3_SPL_ATF + imply TI_I2C_BOARD_DETECT endchoice @@ -35,6 +38,8 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "am65x_evm" +source "board/ti/common/Kconfig" + endif if TARGET_AM654_R5_EVM @@ -51,4 +56,6 @@ config SYS_CONFIG_NAME config SPL_LDSCRIPT default "arch/arm/mach-omap2/u-boot-spl.lds" +source "board/ti/common/Kconfig" + endif diff --git a/board/ti/am65x/evm.c b/board/ti/am65x/evm.c index 52f5d6b11e3..7bd8c4fa665 100644 --- a/board/ti/am65x/evm.c +++ b/board/ti/am65x/evm.c @@ -8,10 +8,31 @@ */ #include <common.h> +#include <dm.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware.h> +#include <asm/gpio.h> #include <asm/io.h> +#include <asm/omap_common.h> #include <spl.h> #include <asm/arch/sys_proto.h> +#include "../common/board_detect.h" + +#define board_is_am65x_base_board() board_ti_is("AM6-COMPROCEVM") + +/* Daughter card presence detection signals */ +enum { + AM65X_EVM_APP_BRD_DET, + AM65X_EVM_LCD_BRD_DET, + AM65X_EVM_SERDES_BRD_DET, + AM65X_EVM_HDMI_GPMC_BRD_DET, + AM65X_EVM_BRD_DET_COUNT, +}; + +/* Max number of MAC addresses that are parsed/processed per daughter card */ +#define DAUGHTER_CARD_NO_OF_MAC_ADDR 8 + DECLARE_GLOBAL_DATA_PTR; int board_init(void) @@ -80,3 +101,223 @@ int ft_board_setup(void *blob, bd_t *bd) return ret; } #endif + +int do_board_detect(void) +{ + int ret; + + ret = ti_i2c_eeprom_am6_get_base(CONFIG_EEPROM_BUS_ADDRESS, + CONFIG_EEPROM_CHIP_ADDRESS); + if (ret) + pr_err("Reading on-board EEPROM at 0x%02x failed %d\n", + CONFIG_EEPROM_CHIP_ADDRESS, ret); + + return ret; +} + +static void setup_board_eeprom_env(void) +{ + char *name = "am65x"; + + if (do_board_detect()) + goto invalid_eeprom; + + if (board_is_am65x_base_board()) + name = "am65x"; + else + printf("Unidentified board claims %s in eeprom header\n", + board_ti_get_name()); + +invalid_eeprom: + set_board_info_env_am6(name); +} + +static int init_daughtercard_det_gpio(char *gpio_name, struct gpio_desc *desc) +{ + int ret; + + memset(desc, 0, sizeof(*desc)); + + ret = dm_gpio_lookup_name(gpio_name, desc); + if (ret < 0) + return ret; + + /* Request GPIO, simply re-using the name as label */ + ret = dm_gpio_request(desc, gpio_name); + if (ret < 0) + return ret; + + return dm_gpio_set_dir_flags(desc, GPIOD_IS_IN); +} + +static int probe_daughtercards(void) +{ + struct ti_am6_eeprom ep; + struct gpio_desc board_det_gpios[AM65X_EVM_BRD_DET_COUNT]; + char mac_addr[DAUGHTER_CARD_NO_OF_MAC_ADDR][TI_EEPROM_HDR_ETH_ALEN]; + u8 mac_addr_cnt; + char name_overlays[1024] = { 0 }; + int i, j; + int ret; + + /* + * Daughter card presence detection signal name to GPIO (via I2C I/O + * expander @ address 0x38) name and EEPROM I2C address mapping. + */ + const struct { + char *gpio_name; + u8 i2c_addr; + } slot_map[AM65X_EVM_BRD_DET_COUNT] = { + { "gpio@38_0", 0x52, }, /* AM65X_EVM_APP_BRD_DET */ + { "gpio@38_1", 0x55, }, /* AM65X_EVM_LCD_BRD_DET */ + { "gpio@38_2", 0x54, }, /* AM65X_EVM_SERDES_BRD_DET */ + { "gpio@38_3", 0x53, }, /* AM65X_EVM_HDMI_GPMC_BRD_DET */ + }; + + /* Declaration of daughtercards to probe */ + const struct { + u8 slot_index; /* Slot the card is installed */ + char *card_name; /* EEPROM-programmed card name */ + char *dtbo_name; /* Device tree overlay to apply */ + u8 eth_offset; /* ethXaddr MAC address index offset */ + } cards[] = { + { + AM65X_EVM_APP_BRD_DET, + "AM6-GPAPPEVM", + "k3-am654-gp.dtbo", + 0, + }, + { + AM65X_EVM_APP_BRD_DET, + "AM6-IDKAPPEVM", + "k3-am654-idk.dtbo", + 3, + }, + { + AM65X_EVM_SERDES_BRD_DET, + "SER-PCIE2LEVM", + "k3-am654-pcie-usb2.dtbo", + 0, + }, + { + AM65X_EVM_SERDES_BRD_DET, + "SER-PCIEUSBEVM", + "k3-am654-pcie-usb3.dtbo", + 0, + }, + { + AM65X_EVM_LCD_BRD_DET, + "OLDI-LCD1EVM", + "k3-am654-evm-oldi-lcd1evm.dtbo", + 0, + }, + }; + + /* + * Initialize GPIO used for daughtercard slot presence detection and + * keep the resulting handles in local array for easier access. + */ + for (i = 0; i < AM65X_EVM_BRD_DET_COUNT; i++) { + ret = init_daughtercard_det_gpio(slot_map[i].gpio_name, + &board_det_gpios[i]); + if (ret < 0) + return ret; + } + + for (i = 0; i < ARRAY_SIZE(cards); i++) { + /* Obtain card-specific slot index and associated I2C address */ + u8 slot_index = cards[i].slot_index; + u8 i2c_addr = slot_map[slot_index].i2c_addr; + + /* + * The presence detection signal is active-low, hence skip + * over this card slot if anything other than 0 is returned. + */ + ret = dm_gpio_get_value(&board_det_gpios[slot_index]); + if (ret < 0) + return ret; + else if (ret) + continue; + + /* Get and parse the daughter card EEPROM record */ + ret = ti_i2c_eeprom_am6_get(CONFIG_EEPROM_BUS_ADDRESS, i2c_addr, + &ep, + (char **)mac_addr, + DAUGHTER_CARD_NO_OF_MAC_ADDR, + &mac_addr_cnt); + if (ret) { + pr_err("Reading daughtercard EEPROM at 0x%02x failed %d\n", + i2c_addr, ret); + /* + * Even this is pretty serious let's just skip over + * this particular daughtercard, rather than ending + * the probing process altogether. + */ + continue; + } + + /* Only process the parsed data if we found a match */ + if (strncmp(ep.name, cards[i].card_name, sizeof(ep.name))) + continue; + + printf("detected %s\n", cards[i].card_name); + + /* + * Populate any MAC addresses from daughtercard into the U-Boot + * environment, starting with a card-specific offset so we can + * have multiple cards contribute to the MAC pool in a well- + * defined manner. + */ + for (j = 0; j < mac_addr_cnt; j++) { + if (!is_valid_ethaddr((u8 *)mac_addr[j])) + continue; + + eth_env_set_enetaddr_by_index("eth", + cards[i].eth_offset + j, + (uchar *)mac_addr[j]); + } + + /* Skip if no overlays are to be added */ + if (!strlen(cards[i].dtbo_name)) + continue; + + /* + * Make sure we are not running out of buffer space by checking + * if we can fit the new overlay, a trailing space to be used + * as a separator, plus the terminating zero. + */ + if (strlen(name_overlays) + strlen(cards[i].dtbo_name) + 2 > + sizeof(name_overlays)) + return -ENOMEM; + + /* Append to our list of overlays */ + strcat(name_overlays, cards[i].dtbo_name); + strcat(name_overlays, " "); + } + + /* Apply device tree overlay(s) to the U-Boot environment, if any */ + if (strlen(name_overlays)) + return env_set("name_overlays", name_overlays); + + return 0; +} + +int board_late_init(void) +{ + struct ti_am6_eeprom *ep = TI_AM6_EEPROM_DATA; + + setup_board_eeprom_env(); + + /* + * The first MAC address for ethernet a.k.a. ethernet0 comes from + * efuse populated via the am654 gigabit eth switch subsystem driver. + * All the other ones are populated via EEPROM, hence continue with + * an index of 1. + */ + board_ti_am6_set_ethaddr(1, ep->mac_addr_cnt); + + /* Check for and probe any plugged-in daughtercards */ + probe_daughtercards(); + + return 0; +} |