diff options
Diffstat (limited to 'board/tqc')
| -rw-r--r-- | board/tqc/tqm85xx/sdram.c | 37 | ||||
| -rw-r--r-- | board/tqc/tqm85xx/tlb.c | 47 |
2 files changed, 0 insertions, 84 deletions
diff --git a/board/tqc/tqm85xx/sdram.c b/board/tqc/tqm85xx/sdram.c index 260cd1c6dd8..b2d31853516 100644 --- a/board/tqc/tqm85xx/sdram.c +++ b/board/tqc/tqm85xx/sdram.c @@ -394,43 +394,6 @@ static phys_size_t sdram_setup(int casl) return (i < N_DDR_CS_CONF) ? ddr_cs_conf[i].size : 0; } -phys_size_t initdram (int board_type) -{ - phys_size_t dram_size = 0; - -#if defined(CONFIG_DDR_DLL) - /* - * This DLL-Override only used on TQM8540 and TQM8560 - */ - { - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - int i, x; - - x = 10; - - /* - * Work around to stabilize DDR DLL - */ - gur->ddrdllcr = 0x81000000; - asm ("sync; isync; msync"); - udelay (200); - while (gur->ddrdllcr != 0x81000100) { - gur->devdisr = gur->devdisr | 0x00010000; - asm ("sync; isync; msync"); - for (i = 0; i < x; i++) - ; - gur->devdisr = gur->devdisr & 0xfff7ffff; - asm ("sync; isync; msync"); - x++; - } - } -#endif - - dram_size = fixed_sdram(); - - return dram_size; -} - #if defined(CONFIG_SYS_DRAM_TEST) int testdram (void) { diff --git a/board/tqc/tqm85xx/tlb.c b/board/tqc/tqm85xx/tlb.c index 75dd348aa52..f9f8cc9a01e 100644 --- a/board/tqc/tqm85xx/tlb.c +++ b/board/tqc/tqm85xx/tlb.c @@ -120,36 +120,6 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY (1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, 0, 6, BOOKE_PAGESZ_64M, 1), - -#if defined(CONFIG_TQM8548_AG) || defined (CONFIG_TQM8548_BE) - /* - * TLB 7+8: 2G DDR, cache enabled - * 0x00000000 2G DDR System memory - * Without SPD EEPROM configured DDR, this must be setup manually. - */ - SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX | MAS3_SW | MAS3_SR, 0, - 0, 7, BOOKE_PAGESZ_1G, 1), - - SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, - CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000, - MAS3_SX | MAS3_SW | MAS3_SR, 0, - 0, 8, BOOKE_PAGESZ_1G, 1), -#else - /* - * TLB 7+8: 512M DDR, cache disabled (needed for memory test) - * 0x00000000 512M DDR System memory - * Without SPD EEPROM configured DDR, this must be setup manually. - */ - SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 7, BOOKE_PAGESZ_256M, 1), - - SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, - CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 8, BOOKE_PAGESZ_256M, 1), -#endif #ifdef CONFIG_PCIE1 /* * TLB 9: 16M Non-cacheable, guarded @@ -228,23 +198,6 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY (1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, 0, 7, BOOKE_PAGESZ_64M, 1), - - /* - * TLB 8+9: 512M DDR, cache disabled (needed for memory test) - * 0x00000000 512M DDR System memory - * Without SPD EEPROM configured DDR, this must be setup manually. - * Make sure the TLB count at the top of this table is correct. - * Likely it needs to be increased by two for these entries. - */ - SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 8, BOOKE_PAGESZ_256M, 1), - - SET_TLB_ENTRY (1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, - CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, - MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, - 0, 9, BOOKE_PAGESZ_256M, 1), - #ifdef CONFIG_PCIE1 /* * TLB 10: 16M Non-cacheable, guarded |