aboutsummaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/freescale/common/Makefile2
-rw-r--r--board/freescale/common/ngpixis.c58
-rw-r--r--board/freescale/common/ngpixis.h7
-rw-r--r--board/freescale/corenet_ds/Makefile2
-rw-r--r--board/freescale/corenet_ds/corenet_ds.c45
-rw-r--r--board/freescale/corenet_ds/law.c5
-rw-r--r--board/freescale/corenet_ds/p3041ds_ddr.c14
-rw-r--r--board/freescale/corenet_ds/p5020ds_ddr.c18
-rw-r--r--board/freescale/corenet_ds/tlb.c10
-rw-r--r--board/freescale/mpc8641hpcn/mpc8641hpcn.c5
-rw-r--r--board/freescale/p1022ds/p1022ds.c3
-rw-r--r--board/freescale/p1_p2_rdb/p1_p2_rdb.c14
12 files changed, 168 insertions, 15 deletions
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 8ea5acb5de4..dbf1da81bd0 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -46,7 +46,9 @@ COBJS-$(CONFIG_MPC8536DS) += ics307_clk.o
COBJS-$(CONFIG_MPC8572DS) += ics307_clk.o
COBJS-$(CONFIG_P1022DS) += ics307_clk.o
COBJS-$(CONFIG_P2020DS) += ics307_clk.o
+COBJS-$(CONFIG_P3041DS) += ics307_clk.o
COBJS-$(CONFIG_P4080DS) += ics307_clk.o
+COBJS-$(CONFIG_P5020DS) += ics307_clk.o
SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))
diff --git a/board/freescale/common/ngpixis.c b/board/freescale/common/ngpixis.c
index 4e01e5a0a2e..765f0359bfb 100644
--- a/board/freescale/common/ngpixis.c
+++ b/board/freescale/common/ngpixis.c
@@ -119,11 +119,50 @@ void __set_altbank(void)
}
void set_altbank(void) __attribute__((weak, alias("__set_altbank")));
+#ifdef DEBUG
+static void pixis_dump_regs(void)
+{
+ unsigned int i;
+
+ printf("id=%02x\n", PIXIS_READ(id));
+ printf("arch=%02x\n", PIXIS_READ(arch));
+ printf("scver=%02x\n", PIXIS_READ(scver));
+ printf("csr=%02x\n", PIXIS_READ(csr));
+ printf("rst=%02x\n", PIXIS_READ(rst));
+ printf("aux=%02x\n", PIXIS_READ(aux));
+ printf("spd=%02x\n", PIXIS_READ(spd));
+ printf("brdcfg0=%02x\n", PIXIS_READ(brdcfg0));
+ printf("brdcfg1=%02x\n", PIXIS_READ(brdcfg1));
+ printf("addr=%02x\n", PIXIS_READ(addr));
+ printf("data=%02x\n", PIXIS_READ(data));
+ printf("led=%02x\n", PIXIS_READ(led));
+ printf("vctl=%02x\n", PIXIS_READ(vctl));
+ printf("vstat=%02x\n", PIXIS_READ(vstat));
+ printf("vcfgen0=%02x\n", PIXIS_READ(vcfgen0));
+ printf("ocmcsr=%02x\n", PIXIS_READ(ocmcsr));
+ printf("ocmmsg=%02x\n", PIXIS_READ(ocmmsg));
+ printf("gmdbg=%02x\n", PIXIS_READ(gmdbg));
+ printf("sclk=%02x%02x%02x\n",
+ PIXIS_READ(sclk[0]), PIXIS_READ(sclk[1]), PIXIS_READ(sclk[2]));
+ printf("dclk=%02x%02x%02x\n",
+ PIXIS_READ(dclk[0]), PIXIS_READ(dclk[1]), PIXIS_READ(dclk[2]));
+ printf("watch=%02x\n", PIXIS_READ(watch));
+
+ for (i = 0; i < 8; i++) {
+ printf("SW%u=%02x/%02x ", i + 1,
+ PIXIS_READ(s[i].sw), PIXIS_READ(s[i].en));
+ }
+ putc('\n');
+}
+#endif
int pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
unsigned int i;
char *p_altbank = NULL;
+#ifdef DEBUG
+ char *p_dump = NULL;
+#endif
char *unknown_param = NULL;
/* No args is a simple reset request.
@@ -137,6 +176,13 @@ int pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
continue;
}
+#ifdef DEBUG
+ if (strcmp(argv[i], "dump") == 0) {
+ p_dump = argv[i];
+ continue;
+ }
+#endif
+
unknown_param = argv[i];
}
@@ -145,6 +191,15 @@ int pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
return 1;
}
+#ifdef DEBUG
+ if (p_dump) {
+ pixis_dump_regs();
+
+ /* 'dump' ignores other commands */
+ return 0;
+ }
+#endif
+
if (p_altbank)
set_altbank();
else
@@ -161,4 +216,7 @@ U_BOOT_CMD(
"Reset the board using the FPGA sequencer",
"- hard reset to default bank\n"
"pixis_reset altbank - reset to alternate bank\n"
+#ifdef DEBUG
+ "pixis_reset dump - display the PIXIS registers\n"
+#endif
);
diff --git a/board/freescale/common/ngpixis.h b/board/freescale/common/ngpixis.h
index 681b0d0b912..1d4483d8b9d 100644
--- a/board/freescale/common/ngpixis.h
+++ b/board/freescale/common/ngpixis.h
@@ -20,16 +20,17 @@ typedef struct ngpixis {
u8 scver;
u8 csr;
u8 rst;
- u8 res1;
+ u8 serclk;
u8 aux;
u8 spd;
u8 brdcfg0;
u8 brdcfg1; /* On some boards, this register is called 'dma' */
u8 addr;
- u8 res2[2];
+ u8 brdcfg2;
+ u8 gpiodir;
u8 data;
u8 led;
- u8 res3;
+ u8 tag;
u8 vctl;
u8 vstat;
u8 vcfgen0;
diff --git a/board/freescale/corenet_ds/Makefile b/board/freescale/corenet_ds/Makefile
index 1047d783f49..69e81a4d362 100644
--- a/board/freescale/corenet_ds/Makefile
+++ b/board/freescale/corenet_ds/Makefile
@@ -28,7 +28,9 @@ LIB = $(obj)lib$(BOARD).o
COBJS-y += $(BOARD).o
COBJS-y += ddr.o
+COBJS-$(CONFIG_P3041DS) += p3041ds_ddr.o
COBJS-$(CONFIG_P4080DS) += p4080ds_ddr.o
+COBJS-$(CONFIG_P5020DS) += p5020ds_ddr.o
COBJS-$(CONFIG_PCI) += pci.o
COBJS-y += law.o
COBJS-y += tlb.o
diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c
index 3db93c36446..93241251b8e 100644
--- a/board/freescale/corenet_ds/corenet_ds.c
+++ b/board/freescale/corenet_ds/corenet_ds.c
@@ -87,10 +87,21 @@ int checkboard (void)
* don't match.
*/
puts("SERDES Reference Clocks: ");
+#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS)
+ sw = in_8(&PIXIS_SW(5));
+ for (i = 0; i < 3; i++) {
+ static const char *freq[] = {"100", "125", "156.25", "212.5" };
+ unsigned int clock = (sw >> (6 - (2 * i))) & 3;
+
+ printf("Bank%u=%sMhz ", i+1, freq[clock]);
+ }
+ puts("\n");
+#else
sw = in_8(&PIXIS_SW(3));
printf("Bank1=%uMHz ", (sw & 0x40) ? 125 : 100);
printf("Bank2=%sMHz ", (sw & 0x20) ? "156.25" : "125");
printf("Bank3=%sMHz\n", (sw & 0x10) ? "156.25" : "125");
+#endif
return 0;
}
@@ -146,7 +157,7 @@ static const char *serdes_clock_to_string(u32 clock)
case SRDS_PLLCR0_RFCK_SEL_156_25:
return "156.25";
default:
- return "???";
+ return "150";
}
}
@@ -157,19 +168,41 @@ int misc_init_r(void)
serdes_corenet_t *srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
u32 actual[NUM_SRDS_BANKS];
unsigned int i;
- u8 sw3;
+ u8 sw;
+#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS)
+ sw = in_8(&PIXIS_SW(5));
+ for (i = 0; i < 3; i++) {
+ unsigned int clock = (sw >> (6 - (2 * i))) & 3;
+ switch (clock) {
+ case 0:
+ actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
+ break;
+ case 1:
+ actual[i] = SRDS_PLLCR0_RFCK_SEL_125;
+ break;
+ case 2:
+ actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25;
+ break;
+ default:
+ printf("Warning: SDREFCLK%u switch setting of '11' is "
+ "unsupported\n", i + 1);
+ break;
+ }
+ }
+#else
/* Warn if the expected SERDES reference clocks don't match the
* actual reference clocks. This needs to be done after calling
* p4080_erratum_serdes8(), since that function may modify the clocks.
*/
- sw3 = in_8(&PIXIS_SW(3));
- actual[0] = (sw3 & 0x40) ?
+ sw = in_8(&PIXIS_SW(3));
+ actual[0] = (sw & 0x40) ?
SRDS_PLLCR0_RFCK_SEL_125 : SRDS_PLLCR0_RFCK_SEL_100;
- actual[1] = (sw3 & 0x20) ?
+ actual[1] = (sw & 0x20) ?
SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125;
- actual[2] = (sw3 & 0x10) ?
+ actual[2] = (sw & 0x10) ?
SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125;
+#endif
for (i = 0; i < NUM_SRDS_BANKS; i++) {
u32 expected = srds_regs->bank[i].pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
diff --git a/board/freescale/corenet_ds/law.c b/board/freescale/corenet_ds/law.c
index 43b4b97de18..d2ba556b636 100644
--- a/board/freescale/corenet_ds/law.c
+++ b/board/freescale/corenet_ds/law.c
@@ -1,5 +1,5 @@
/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc.
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
@@ -35,6 +35,9 @@ struct law_entry law_table[] = {
#ifdef CONFIG_SYS_DCSRBAR_PHYS
SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR),
#endif
+#ifdef CONFIG_SYS_NAND_BASE_PHYS
+ SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
+#endif
};
int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/freescale/corenet_ds/p3041ds_ddr.c b/board/freescale/corenet_ds/p3041ds_ddr.c
new file mode 100644
index 00000000000..5a8ed94b048
--- /dev/null
+++ b/board/freescale/corenet_ds/p3041ds_ddr.c
@@ -0,0 +1,14 @@
+/*
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/fsl_ddr_sdram.h>
+
+fixed_ddr_parm_t fixed_ddr_parm_0[] = {
+ {0, 0, NULL}
+};
diff --git a/board/freescale/corenet_ds/p5020ds_ddr.c b/board/freescale/corenet_ds/p5020ds_ddr.c
new file mode 100644
index 00000000000..e65de364d73
--- /dev/null
+++ b/board/freescale/corenet_ds/p5020ds_ddr.c
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/fsl_ddr_sdram.h>
+
+fixed_ddr_parm_t fixed_ddr_parm_0[] = {
+ {0, 0, NULL}
+};
+
+fixed_ddr_parm_t fixed_ddr_parm_1[] = {
+ {0, 0, NULL}
+};
diff --git a/board/freescale/corenet_ds/tlb.c b/board/freescale/corenet_ds/tlb.c
index fe77e798a8c..38736b44968 100644
--- a/board/freescale/corenet_ds/tlb.c
+++ b/board/freescale/corenet_ds/tlb.c
@@ -117,6 +117,16 @@ struct fsl_e_tlb_entry tlb_table[] = {
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 13, BOOKE_PAGESZ_4M, 1),
#endif
+#ifdef CONFIG_SYS_NAND_BASE
+ /*
+ * *I*G - NAND
+ * entry 14 and 15 has been used hard coded, they will be disabled
+ * in cpu_init_f, so we use entry 16 for nand.
+ */
+ SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 16, BOOKE_PAGESZ_1M, 1),
+#endif
};
int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/mpc8641hpcn/mpc8641hpcn.c b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
index cd2ce4b75ae..e3916fc8e43 100644
--- a/board/freescale/mpc8641hpcn/mpc8641hpcn.c
+++ b/board/freescale/mpc8641hpcn/mpc8641hpcn.c
@@ -34,11 +34,6 @@
phys_size_t fixed_sdram(void);
-int board_early_init_f(void)
-{
- return 0;
-}
-
int checkboard(void)
{
u8 vboot;
diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c
index 73a10213be9..8ef627fc7b4 100644
--- a/board/freescale/p1022ds/p1022ds.c
+++ b/board/freescale/p1022ds/p1022ds.c
@@ -46,6 +46,9 @@ int board_early_init_f(void)
/* Set the pin muxing to enable ETSEC2. */
clrbits_be32(&gur->pmuxcr2, 0x001F8000);
+ /* Enable the SPI */
+ clrsetbits_8(&pixis->brdcfg0, PIXIS_ELBC_SPI_MASK, PIXIS_SPI);
+
return 0;
}
diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
index 0b4ae9d7fd0..d66b130e6d4 100644
--- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c
+++ b/board/freescale/p1_p2_rdb/p1_p2_rdb.c
@@ -47,6 +47,7 @@ DECLARE_GLOBAL_DATA_PTR;
#define RGMII_PHY_RST_SET 0x02000000
#define USB_RST_CLR 0x04000000
+#define USB2_PORT_OUT_EN 0x01000000
#define GPIO_DIR 0x060f0000
@@ -128,6 +129,19 @@ int checkboard (void)
return 0;
}
+int misc_init_r(void)
+{
+#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
+ ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+ ccsr_gpio_t *gpio = (void *)CONFIG_SYS_MPC85xx_GPIO_ADDR;
+
+ setbits_be32(&gpio->gpdir, USB2_PORT_OUT_EN);
+ setbits_be32(&gpio->gpdat, USB2_PORT_OUT_EN);
+ setbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_ELBC_OFF_USB2_ON);
+#endif
+ return 0;
+}
+
int board_early_init_r(void)
{
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 23:23:01 +0000