diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/android/fastboot.rst | 18 |
1 files changed, 18 insertions, 0 deletions
diff --git a/doc/android/fastboot.rst b/doc/android/fastboot.rst index 7611f07038e..1ad8a897c85 100644 --- a/doc/android/fastboot.rst +++ b/doc/android/fastboot.rst @@ -28,6 +28,7 @@ The following OEM commands are supported (if enabled): - ``oem partconf`` - this executes ``mmc partconf %x <arg> 0`` to configure eMMC with <arg> = boot_ack boot_partition - ``oem bootbus`` - this executes ``mmc bootbus %x %s`` to configure eMMC +- ``oem run`` - this executes an arbitrary U-Boot command Support for both eMMC and NAND devices is included. @@ -227,6 +228,23 @@ and on the U-Boot side you should see:: Starting kernel ... +Running Shell Commands +^^^^^^^^^^^^^^^^^^^^^^ + +Normally, arbitrary U-Boot command execution is not enabled. This is so +fastboot can be used to update systems using verified boot. However, such +functionality can be useful for production or when verified boot is not in use. +Enable ``CONFIG_FASTBOOT_OEM_RUN`` to use this functionality. This will enable +``oem run`` command, which can be used with the fastboot client. For example, +to print "Hello at 115200 baud" (or whatever ``CONFIG_BAUDRATE`` is), run:: + + $ fastboot oem run:'echo Hello at $baudrate baud' + +You can run any command you would normally run on the U-Boot command line, +including multiple commands (using e.g. ``;`` or ``&&``) and control structures +(``if``, ``while``, etc.). The exit code of ``fastboot`` will reflect the exit +code of the command you ran. + References ---------- |