diff options
Diffstat (limited to 'drivers/ddr/microchip/ddr2_regs.h')
-rw-r--r-- | drivers/ddr/microchip/ddr2_regs.h | 148 |
1 files changed, 148 insertions, 0 deletions
diff --git a/drivers/ddr/microchip/ddr2_regs.h b/drivers/ddr/microchip/ddr2_regs.h new file mode 100644 index 00000000000..0f4b159048c --- /dev/null +++ b/drivers/ddr/microchip/ddr2_regs.h @@ -0,0 +1,148 @@ +/* + * (c) 2015 Purna Chandra Mandal <purna.mandal@microchip.com> + * + * SPDX-License-Identifier: GPL-2.0+ + * + */ + +#ifndef __MICROCHIP_DDR2_REGS_H +#define __MICROCHIP_DDR2_REGS_H + +#include <linux/bitops.h> + +/* DDR2 Controller */ +struct ddr2_ctrl_regs { + u32 tsel; + u32 minlim; + u32 reqprd; + u32 mincmd; + u32 memcon; + u32 memcfg0; + u32 memcfg1; + u32 memcfg2; + u32 memcfg3; + u32 memcfg4; + u32 refcfg; + u32 pwrcfg; + u32 dlycfg0; + u32 dlycfg1; + u32 dlycfg2; + u32 dlycfg3; + u32 odtcfg; + u32 xfercfg; + u32 cmdissue; + u32 odtencfg; + u32 memwidth; + u32 unused[11]; + u32 cmd10[16]; + u32 cmd20[16]; +}; + +/* Arbiter Config */ +#define MIN_LIM_WIDTH 5 +#define RQST_PERIOD_WIDTH 8 +#define MIN_CMDACPT_WIDTH 8 + +/* Refresh Config */ +#define REFCNT_CLK(x) (x) +#define REFDLY_CLK(x) ((x) << 16) +#define MAX_PEND_REF(x) ((x) << 24) + +/* Power Config */ +#define PRECH_PWR_DN_ONLY(x) ((x) << 22) +#define SELF_REF_DLY(x) ((x) << 12) +#define PWR_DN_DLY(x) ((x) << 4) +#define EN_AUTO_SELF_REF(x) ((x) << 3) +#define EN_AUTO_PWR_DN(x) ((x) << 2) +#define ERR_CORR_EN(x) ((x) << 1) +#define ECC_EN(x) (x) + +/* Memory Width */ +#define HALF_RATE_MODE BIT(3) + +/* Delay Config */ +#define ODTWLEN(x) ((x) << 20) +#define ODTRLEN(x) ((x) << 16) +#define ODTWDLY(x) ((x) << 12) +#define ODTRDLY(x) ((x) << 8) + +/* Xfer Config */ +#define BIG_ENDIAN(x) ((x) << 31) +#define MAX_BURST(x) ((x) << 24) +#define RDATENDLY(x) ((x) << 16) +#define NXDATAVDLY(x) ((x) << 4) +#define NXTDATRQDLY(x) ((x) << 0) + +/* Host Commands */ +#define IDLE_NOP 0x00ffffff +#define PRECH_ALL_CMD 0x00fff401 +#define REF_CMD 0x00fff801 +#define LOAD_MODE_CMD 0x00fff001 +#define CKE_LOW 0x00ffeffe + +#define NUM_HOST_CMDS 12 + +/* Host CMD Issue */ +#define CMD_VALID BIT(4) +#define NUMHOSTCMD(x) (x) + +/* Memory Control */ +#define INIT_DONE BIT(1) +#define INIT_START BIT(0) + +/* Address Control */ +#define EN_AUTO_PRECH 0 +#define SB_PRI 1 + +/* DDR2 Phy Register */ +struct ddr2_phy_regs { + u32 scl_start; + u32 unused1[2]; + u32 scl_latency; + u32 unused2[2]; + u32 scl_config_1; + u32 scl_config_2; + u32 pad_ctrl; + u32 dll_recalib; +}; + +/* PHY PAD CONTROL */ +#define ODT_SEL BIT(0) +#define ODT_EN BIT(1) +#define DRIVE_SEL(x) ((x) << 2) +#define ODT_PULLDOWN(x) ((x) << 4) +#define ODT_PULLUP(x) ((x) << 6) +#define EXTRA_OEN_CLK(x) ((x) << 8) +#define NOEXT_DLL BIT(9) +#define DLR_DFT_WRCMD BIT(13) +#define HALF_RATE BIT(14) +#define DRVSTR_PFET(x) ((x) << 16) +#define DRVSTR_NFET(x) ((x) << 20) +#define RCVR_EN BIT(28) +#define PREAMBLE_DLY(x) ((x) << 29) + +/* PHY DLL RECALIBRATE */ +#define RECALIB_CNT(x) ((x) << 8) +#define DISABLE_RECALIB(x) ((x) << 26) +#define DELAY_START_VAL(x) ((x) << 28) + +/* PHY SCL CONFIG1 */ +#define SCL_BURST8 BIT(0) +#define SCL_DDR_CONNECTED BIT(1) +#define SCL_RCAS_LAT(x) ((x) << 4) +#define SCL_ODTCSWW BIT(24) + +/* PHY SCL CONFIG2 */ +#define SCL_CSEN BIT(0) +#define SCL_WCAS_LAT(x) ((x) << 8) + +/* PHY SCL Latency */ +#define SCL_CAPCLKDLY(x) ((x) << 0) +#define SCL_DDRCLKDLY(x) ((x) << 4) + +/* PHY SCL START */ +#define SCL_START BIT(28) +#define SCL_EN BIT(26) +#define SCL_LUBPASS (BIT(1) | BIT(0)) + +#endif /* __MICROCHIP_DDR2_REGS_H */ |