diff options
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/sunxi_mmc.c | 27 |
1 files changed, 19 insertions, 8 deletions
diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c index 33cedb4edba..a30fd8fbdb1 100644 --- a/drivers/mmc/sunxi_mmc.c +++ b/drivers/mmc/sunxi_mmc.c @@ -103,21 +103,29 @@ static int mmc_resource_init(int sdc_no) } #endif +/* + * All A64 and later MMC controllers feature auto-calibration. This would + * normally be detected via the compatible string, but we need something + * which works in the SPL as well. + */ +static bool sunxi_mmc_can_calibrate(void) +{ + return IS_ENABLED(CONFIG_MACH_SUN50I) || + IS_ENABLED(CONFIG_MACH_SUN50I_H5) || + IS_ENABLED(CONFIG_SUN50I_GEN_H6) || + IS_ENABLED(CONFIG_MACH_SUN8I_R40); +} + static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz) { unsigned int pll, pll_hz, div, n, oclk_dly, sclk_dly; bool new_mode = IS_ENABLED(CONFIG_MMC_SUNXI_HAS_NEW_MODE); - bool calibrate = false; u32 val = 0; /* A83T support new mode only on eMMC */ if (IS_ENABLED(CONFIG_MACH_SUN8I_A83T) && priv->mmc_no != 2) new_mode = false; -#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_SUN50I_GEN_H6) - calibrate = true; -#endif - if (hz <= 24000000) { pll = CCM_MMC_CTRL_OSCM24; pll_hz = 24000000; @@ -179,7 +187,9 @@ static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz) if (new_mode) { val |= CCM_MMC_CTRL_MODE_SEL_NEW; setbits_le32(&priv->reg->ntsr, SUNXI_MMC_NTSR_MODE_SEL_NEW); - } else if (!calibrate) { + } + + if (!sunxi_mmc_can_calibrate()) { /* * Use hardcoded delay values if controller doesn't support * calibration @@ -237,14 +247,15 @@ static int mmc_config_clock(struct sunxi_mmc_priv *priv, struct mmc *mmc) rval &= ~SUNXI_MMC_CLK_DIVIDER_MASK; writel(rval, &priv->reg->clkcr); -#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_SUN50I_GEN_H6) +#if defined(CONFIG_SUNXI_GEN_SUN6I) || defined(CONFIG_SUN50I_GEN_H6) /* A64 supports calibration of delays on MMC controller and we * have to set delay of zero before starting calibration. * Allwinner BSP driver sets a delay only in the case of * using HS400 which is not supported by mainline U-Boot or * Linux at the moment */ - writel(SUNXI_MMC_CAL_DL_SW_EN, &priv->reg->samp_dl); + if (sunxi_mmc_can_calibrate()) + writel(SUNXI_MMC_CAL_DL_SW_EN, &priv->reg->samp_dl); #endif /* Re-enable Clock */ |