diff options
Diffstat (limited to 'drivers/power/twl6030.c')
| -rw-r--r-- | drivers/power/twl6030.c | 54 |
1 files changed, 48 insertions, 6 deletions
diff --git a/drivers/power/twl6030.c b/drivers/power/twl6030.c index 6bf1a332864..a1c6663a2e3 100644 --- a/drivers/power/twl6030.c +++ b/drivers/power/twl6030.c @@ -20,6 +20,15 @@ static struct twl6030_data twl6030_info = { .vbat_shift = TWL6030_VBAT_SHIFT, }; +static struct twl6030_data twl6032_info = { + .chip_type = chip_TWL6032, + .adc_rbase = TWL6032_GPCH0_LSB, + .adc_ctrl = TWL6032_CTRL_P1, + .adc_enable = CTRL_P1_SP1, + .vbat_mult = TWL6032_VBAT_MULT, + .vbat_shift = TWL6032_VBAT_SHIFT, +}; + static int twl6030_gpadc_read_channel(u8 channel_no) { u8 lsb = 0; @@ -115,6 +124,18 @@ int twl6030_get_battery_voltage(void) { int battery_volt = 0; int ret = 0; + u8 vbatch; + + if (twl->chip_type == chip_TWL6030) { + vbatch = TWL6030_GPADC_VBAT_CHNL; + } else { + ret = twl6030_i2c_write_u8(TWL6030_CHIP_ADC, + TWL6032_GPSELECT_ISB, + TWL6032_GPADC_VBAT_CHNL); + if (ret) + return ret; + vbatch = 0; + } /* Start GPADC SW conversion */ ret = twl6030_gpadc_sw2_trigger(); @@ -124,7 +145,7 @@ int twl6030_get_battery_voltage(void) } /* measure Vbat voltage */ - battery_volt = twl6030_gpadc_read_channel(7); + battery_volt = twl6030_gpadc_read_channel(vbatch); if (battery_volt < 0) { printf("Failed to read battery voltage\n"); return ret; @@ -137,14 +158,35 @@ int twl6030_get_battery_voltage(void) void twl6030_init_battery_charging(void) { - u8 stat1 = 0; + u8 val = 0; int battery_volt = 0; int ret = 0; - twl = &twl6030_info; + ret = twl6030_i2c_read_u8(TWL6030_CHIP_USB, USB_PRODUCT_ID_LSB, &val); + if (ret) { + puts("twl6030_init_battery_charging(): could not determine chip!\n"); + return; + } + if (val == 0x30) { + twl = &twl6030_info; + } else if (val == 0x32) { + twl = &twl6032_info; + } else { + puts("twl6030_init_battery_charging(): unsupported chip type\n"); + return; + } /* Enable VBAT measurement */ - twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC1, VBAT_MEAS); + if (twl->chip_type == chip_TWL6030) { + twl6030_i2c_write_u8(TWL6030_CHIP_PM, MISC1, VBAT_MEAS); + twl6030_i2c_write_u8(TWL6030_CHIP_ADC, + TWL6030_GPADC_CTRL, + GPADC_CTRL_SCALER_DIV4); + } else { + twl6030_i2c_write_u8(TWL6030_CHIP_ADC, + TWL6032_GPADC_CTRL2, + GPADC_CTRL2_CH18_SCALER_EN); + } /* Enable GPADC module */ ret = twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, TOGGLE1, FGS | GPADCS); @@ -161,10 +203,10 @@ void twl6030_init_battery_charging(void) printf("Main battery voltage too low!\n"); /* Check for the presence of USB charger */ - twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, CONTROLLER_STAT1, &stat1); + twl6030_i2c_read_u8(TWL6030_CHIP_CHARGER, CONTROLLER_STAT1, &val); /* check for battery presence indirectly via Fuel gauge */ - if ((stat1 & VBUS_DET) && (battery_volt < 3300)) + if ((val & VBUS_DET) && (battery_volt < 3300)) twl6030_start_usb_charging(); return; |