diff options
Diffstat (limited to 'dts/upstream/Bindings/mmc/mtk-sd.yaml')
| -rw-r--r-- | dts/upstream/Bindings/mmc/mtk-sd.yaml | 360 |
1 files changed, 360 insertions, 0 deletions
diff --git a/dts/upstream/Bindings/mmc/mtk-sd.yaml b/dts/upstream/Bindings/mmc/mtk-sd.yaml new file mode 100644 index 00000000000..3fffa467e4e --- /dev/null +++ b/dts/upstream/Bindings/mmc/mtk-sd.yaml @@ -0,0 +1,360 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mmc/mtk-sd.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MTK MSDC Storage Host Controller + +maintainers: + - Chaotian Jing <chaotian.jing@mediatek.com> + - Wenbin Mei <wenbin.mei@mediatek.com> + +properties: + compatible: + oneOf: + - enum: + - mediatek,mt2701-mmc + - mediatek,mt2712-mmc + - mediatek,mt6779-mmc + - mediatek,mt6795-mmc + - mediatek,mt7620-mmc + - mediatek,mt7622-mmc + - mediatek,mt7986-mmc + - mediatek,mt8135-mmc + - mediatek,mt8173-mmc + - mediatek,mt8183-mmc + - mediatek,mt8516-mmc + - items: + - const: mediatek,mt7623-mmc + - const: mediatek,mt2701-mmc + - items: + - enum: + - mediatek,mt8186-mmc + - mediatek,mt8188-mmc + - mediatek,mt8192-mmc + - mediatek,mt8195-mmc + - mediatek,mt8365-mmc + - const: mediatek,mt8183-mmc + + reg: + minItems: 1 + items: + - description: base register (required). + - description: top base register (required for MT8183). + + clocks: + description: + Should contain phandle for the clock feeding the MMC controller. + minItems: 2 + maxItems: 7 + + clock-names: + minItems: 2 + maxItems: 7 + + interrupts: + description: + Should at least contain MSDC GIC interrupt. To support SDIO in-band wakeup, an extended + interrupt is required and be configured as wakeup source irq. + minItems: 1 + maxItems: 2 + + interrupt-names: + items: + - const: msdc + - const: sdio_wakeup + + pinctrl-names: + description: + Should at least contain default and state_uhs. To support SDIO in-band wakeup, dat1 pin + will be switched between GPIO mode and SDIO DAT1 mode, state_eint is mandatory in this + scenario. + minItems: 2 + items: + - const: default + - const: state_uhs + - const: state_eint + + pinctrl-0: + description: + should contain default/high speed pin ctrl. + maxItems: 1 + + pinctrl-1: + description: + should contain uhs mode pin ctrl. + maxItems: 1 + + pinctrl-2: + description: + should switch dat1 pin to GPIO mode. + maxItems: 1 + + hs400-ds-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + HS400 DS delay setting. + minimum: 0 + maximum: 0xffffffff + + mediatek,hs200-cmd-int-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + HS200 command internal delay setting. + This field has total 32 stages. + The value is an integer from 0 to 31. + minimum: 0 + maximum: 31 + + mediatek,hs400-cmd-int-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + HS400 command internal delay setting. + This field has total 32 stages. + The value is an integer from 0 to 31. + minimum: 0 + maximum: 31 + + mediatek,hs400-cmd-resp-sel-rising: + $ref: /schemas/types.yaml#/definitions/flag + description: + HS400 command response sample selection. + If present, HS400 command responses are sampled on rising edges. + If not present, HS400 command responses are sampled on falling edges. + + mediatek,hs400-ds-dly3: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Gear of the third delay line for DS for input data latch in data + pad macro, there are 32 stages from 0 to 31. + For different corner IC, the time is different about one step, it is + about 100ps. + The value is confirmed by doing scan and calibration to find a best + value with corner IC and it is valid only for HS400 mode. + minimum: 0 + maximum: 31 + + mediatek,latch-ck: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Some SoCs do not support enhance_rx, need set correct latch-ck to avoid + data crc error caused by stop clock(fifo full) Valid range = [0:0x7]. + if not present, default value is 0. + applied to compatible "mediatek,mt2701-mmc". + minimum: 0 + maximum: 7 + + resets: + maxItems: 1 + + reset-names: + const: hrst + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - pinctrl-names + - pinctrl-0 + - pinctrl-1 + - vmmc-supply + - vqmmc-supply + +allOf: + - $ref: mmc-controller.yaml# + - if: + properties: + compatible: + enum: + - mediatek,mt2701-mmc + - mediatek,mt6779-mmc + - mediatek,mt6795-mmc + - mediatek,mt7620-mmc + - mediatek,mt7622-mmc + - mediatek,mt7623-mmc + - mediatek,mt8135-mmc + - mediatek,mt8173-mmc + - mediatek,mt8183-mmc + - mediatek,mt8186-mmc + - mediatek,mt8188-mmc + - mediatek,mt8195-mmc + - mediatek,mt8516-mmc + then: + properties: + clocks: + minItems: 2 + items: + - description: source clock + - description: HCLK which used for host + - description: independent source clock gate + clock-names: + minItems: 2 + items: + - const: source + - const: hclk + - const: source_cg + + - if: + properties: + compatible: + contains: + const: mediatek,mt2712-mmc + then: + properties: + clocks: + minItems: 3 + items: + - description: source clock + - description: HCLK which used for host + - description: independent source clock gate + - description: bus clock used for internal register access (required for MSDC0/3). + clock-names: + minItems: 3 + items: + - const: source + - const: hclk + - const: source_cg + - const: bus_clk + + - if: + properties: + compatible: + contains: + const: mediatek,mt8183-mmc + then: + properties: + reg: + minItems: 2 + + - if: + properties: + compatible: + contains: + enum: + - mediatek,mt7986-mmc + then: + properties: + clocks: + minItems: 3 + items: + - description: source clock + - description: HCLK which used for host + - description: independent source clock gate + - description: bus clock used for internal register access (required for MSDC0/3). + - description: msdc subsys clock gate + clock-names: + minItems: 3 + items: + - const: source + - const: hclk + - const: source_cg + - const: bus_clk + - const: sys_cg + + - if: + properties: + compatible: + enum: + - mediatek,mt8186-mmc + - mediatek,mt8188-mmc + - mediatek,mt8195-mmc + then: + properties: + clocks: + items: + - description: source clock + - description: HCLK which used for host + - description: independent source clock gate + - description: crypto clock used for data encrypt/decrypt (optional) + clock-names: + items: + - const: source + - const: hclk + - const: source_cg + - const: crypto + + - if: + properties: + compatible: + contains: + const: mediatek,mt8192-mmc + then: + properties: + clocks: + items: + - description: source clock + - description: HCLK which used for host + - description: independent source clock gate + - description: msdc subsys clock gate + - description: peripheral bus clock gate + - description: AXI bus clock gate + - description: AHB bus clock gate + clock-names: + items: + - const: source + - const: hclk + - const: source_cg + - const: sys_cg + - const: pclk_cg + - const: axi_cg + - const: ahb_cg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/mt8173-clk.h> + mmc0: mmc@11230000 { + compatible = "mediatek,mt8173-mmc"; + reg = <0x11230000 0x1000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>; + vmmc-supply = <&mt6397_vemc_3v3_reg>; + vqmmc-supply = <&mt6397_vio18_reg>; + clocks = <&pericfg CLK_PERI_MSDC30_0>, + <&topckgen CLK_TOP_MSDC50_0_H_SEL>; + clock-names = "source", "hclk"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; + assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>; + assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>; + hs400-ds-delay = <0x14015>; + mediatek,hs200-cmd-int-delay = <26>; + mediatek,hs400-cmd-int-delay = <14>; + mediatek,hs400-cmd-resp-sel-rising; + }; + + mmc3: mmc@11260000 { + compatible = "mediatek,mt8173-mmc"; + reg = <0x11260000 0x1000>; + clock-names = "source", "hclk"; + clocks = <&pericfg CLK_PERI_MSDC30_3>, + <&topckgen CLK_TOP_MSDC50_2_H_SEL>; + interrupt-names = "msdc", "sdio_wakeup"; + interrupts-extended = <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_LOW 0>, + <&pio 23 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default", "state_uhs", "state_eint"; + pinctrl-0 = <&mmc2_pins_default>; + pinctrl-1 = <&mmc2_pins_uhs>; + pinctrl-2 = <&mmc2_pins_eint>; + bus-width = <4>; + max-frequency = <200000000>; + cap-sd-highspeed; + sd-uhs-sdr104; + keep-power-in-suspend; + wakeup-source; + cap-sdio-irq; + no-mmc; + no-sd; + non-removable; + vmmc-supply = <&sdio_fixed_3v3>; + vqmmc-supply = <&mt6397_vgp3_reg>; + mmc-pwrseq = <&wifi_pwrseq>; + }; + +... |