diff options
Diffstat (limited to 'dts/upstream/Bindings/pci/rockchip-dw-pcie.yaml')
| -rw-r--r-- | dts/upstream/Bindings/pci/rockchip-dw-pcie.yaml | 215 |
1 files changed, 215 insertions, 0 deletions
diff --git a/dts/upstream/Bindings/pci/rockchip-dw-pcie.yaml b/dts/upstream/Bindings/pci/rockchip-dw-pcie.yaml new file mode 100644 index 00000000000..1ae8dcfa072 --- /dev/null +++ b/dts/upstream/Bindings/pci/rockchip-dw-pcie.yaml @@ -0,0 +1,215 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DesignWare based PCIe controller on Rockchip SoCs + +maintainers: + - Shawn Lin <shawn.lin@rock-chips.com> + - Simon Xue <xxm@rock-chips.com> + - Heiko Stuebner <heiko@sntech.de> + +description: |+ + RK3568 SoC PCIe host controller is based on the Synopsys DesignWare + PCIe IP and thus inherits all the common properties defined in + snps,dw-pcie.yaml. + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +properties: + compatible: + oneOf: + - const: rockchip,rk3568-pcie + - items: + - enum: + - rockchip,rk3588-pcie + - const: rockchip,rk3568-pcie + + reg: + items: + - description: Data Bus Interface (DBI) registers + - description: Rockchip designed configuration registers + - description: Config registers + + reg-names: + items: + - const: dbi + - const: apb + - const: config + + clocks: + minItems: 5 + items: + - description: AHB clock for PCIe master + - description: AHB clock for PCIe slave + - description: AHB clock for PCIe dbi + - description: APB clock for PCIe + - description: Auxiliary clock for PCIe + - description: PIPE clock + + clock-names: + minItems: 5 + items: + - const: aclk_mst + - const: aclk_slv + - const: aclk_dbi + - const: pclk + - const: aux + - const: pipe + + interrupts: + items: + - description: + Combined system interrupt, which is used to signal the following + interrupts - phy_link_up, dll_link_up, link_req_rst_not, hp_pme, + hp, hp_msi, link_auto_bw, link_auto_bw_msi, bw_mgt, bw_mgt_msi, + edma_wr, edma_rd, dpa_sub_upd, rbar_update, link_eq_req, ep_elbi_app + - description: + Combined PM interrupt, which is used to signal the following + interrupts - linkst_in_l1sub, linkst_in_l1, linkst_in_l2, + linkst_in_l0s, linkst_out_l1sub, linkst_out_l1, linkst_out_l2, + linkst_out_l0s, pm_dstate_update + - description: + Combined message interrupt, which is used to signal the following + interrupts - ven_msg, unlock_msg, ltr_msg, cfg_pme, cfg_pme_msi, + pm_pme, pm_to_ack, pm_turnoff, obff_idle, obff_obff, obff_cpu_active + - description: + Combined legacy interrupt, which is used to signal the following + interrupts - inta, intb, intc, intd + - description: + Combined error interrupt, which is used to signal the following + interrupts - aer_rc_err, aer_rc_err_msi, rx_cpl_timeout, + tx_cpl_timeout, cor_err_sent, nf_err_sent, f_err_sent, cor_err_rx, + nf_err_rx, f_err_rx, radm_qoverflow + + interrupt-names: + items: + - const: sys + - const: pmc + - const: msg + - const: legacy + - const: err + + legacy-interrupt-controller: + description: Interrupt controller node for handling legacy PCI interrupts. + type: object + additionalProperties: false + properties: + "#address-cells": + const: 0 + + "#interrupt-cells": + const: 1 + + interrupt-controller: true + + interrupts: + items: + - description: combined legacy interrupt + required: + - "#address-cells" + - "#interrupt-cells" + - interrupt-controller + - interrupts + + msi-map: true + + num-lanes: true + + phys: + maxItems: 1 + + phy-names: + const: pcie-phy + + power-domains: + maxItems: 1 + + ranges: + minItems: 2 + maxItems: 3 + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + oneOf: + - const: pipe + - items: + - const: pwr + - const: pipe + + vpcie3v3-supply: true + +required: + - compatible + - reg + - reg-names + - clocks + - clock-names + - msi-map + - num-lanes + - phys + - phy-names + - power-domains + - resets + - reset-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + pcie3x2: pcie@fe280000 { + compatible = "rockchip,rk3568-pcie"; + reg = <0x3 0xc0800000 0x0 0x390000>, + <0x0 0xfe280000 0x0 0x10000>, + <0x3 0x80000000 0x0 0x100000>; + reg-names = "dbi", "apb", "config"; + bus-range = <0x20 0x2f>; + clocks = <&cru 143>, <&cru 144>, + <&cru 145>, <&cru 146>, + <&cru 147>; + clock-names = "aclk_mst", "aclk_slv", + "aclk_dbi", "pclk", + "aux"; + device_type = "pci"; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "sys", "pmc", "msg", "legacy", "err"; + linux,pci-domain = <2>; + max-link-speed = <2>; + msi-map = <0x2000 &its 0x2000 0x1000>; + num-lanes = <2>; + phys = <&pcie30phy>; + phy-names = "pcie-phy"; + power-domains = <&power 15>; + ranges = <0x81000000 0x0 0x80800000 0x3 0x80800000 0x0 0x100000>, + <0x83000000 0x0 0x80900000 0x3 0x80900000 0x0 0x3f700000>; + resets = <&cru 193>; + reset-names = "pipe"; + #address-cells = <3>; + #size-cells = <2>; + + legacy-interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>; + }; + }; + }; +... |