diff options
Diffstat (limited to 'dts/upstream/src/arm/qcom/qcom-msm8960-samsung-expressatt.dts')
| -rw-r--r-- | dts/upstream/src/arm/qcom/qcom-msm8960-samsung-expressatt.dts | 405 |
1 files changed, 405 insertions, 0 deletions
diff --git a/dts/upstream/src/arm/qcom/qcom-msm8960-samsung-expressatt.dts b/dts/upstream/src/arm/qcom/qcom-msm8960-samsung-expressatt.dts new file mode 100644 index 00000000000..af6cc6393d7 --- /dev/null +++ b/dts/upstream/src/arm/qcom/qcom-msm8960-samsung-expressatt.dts @@ -0,0 +1,405 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <dt-bindings/input/input.h> +#include <dt-bindings/reset/qcom,gcc-msm8960.h> + +#include "qcom-msm8960.dtsi" +#include "pm8921.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> +#include <dt-bindings/input/gpio-keys.h> + +/ { + model = "Samsung Galaxy Express SGH-I437"; + compatible = "samsung,expressatt", "qcom,msm8960"; + chassis-type = "handset"; + + aliases { + serial0 = &gsbi5_serial; + mmc0 = &sdcc1; /* SDCC1 eMMC slot */ + mmc1 = &sdcc3; /* SDCC3 SD card slot */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pin_a>; + + key-home { + label = "Home"; + gpios = <&msmgpio 40 GPIO_ACTIVE_LOW>; + debounce-interval = <5>; + linux,code = <KEY_HOMEPAGE>; + wakeup-event-action = <EV_ACT_ASSERTED>; + wakeup-source; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&msmgpio 50 GPIO_ACTIVE_LOW>; + debounce-interval = <5>; + linux,code = <KEY_VOLUMEUP>; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&msmgpio 81 GPIO_ACTIVE_LOW>; + debounce-interval = <5>; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; +}; + +&gsbi5 { + qcom,mode = <GSBI_PROT_I2C_UART>; + status = "okay"; +}; + +&gsbi5_serial { + status = "okay"; +}; + +&sdcc1 { + vmmc-supply = <&pm8921_l5>; + status = "okay"; +}; + +&sdcc3 { + vmmc-supply = <&pm8921_l6>; + vqmmc-supply = <&pm8921_l7>; + status = "okay"; +}; + +&gsbi1 { + qcom,mode = <GSBI_PROT_SPI>; + pinctrl-0 = <&spi1_default>; + pinctrl-names = "default"; + status = "okay"; +}; + +&gsbi1_spi { + status = "okay"; +}; + +&gsbi3 { + qcom,mode = <GSBI_PROT_I2C>; + status = "okay"; +}; + +&gsbi3_i2c { + status = "okay"; + + // Atmel mXT224S touchscreen + touchscreen@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&msmgpio>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + vdda-supply = <&pm8921_lvs6>; + vdd-supply = <&pm8921_l17>; + pinctrl-names = "default"; + pinctrl-0 = <&touchscreen>; + }; +}; + +&msmgpio { + spi1_default: spi1-default-state { + mosi-pins { + pins = "gpio6"; + function = "gsbi1"; + drive-strength = <12>; + bias-disable; + }; + + miso-pins { + pins = "gpio7"; + function = "gsbi1"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio8"; + function = "gsbi1"; + drive-strength = <12>; + bias-disable; + output-low; + }; + + clk-pins { + pins = "gpio9"; + function = "gsbi1"; + drive-strength = <12>; + bias-disable; + }; + }; + + gpio_keys_pin_a: gpio-keys-active-state { + pins = "gpio40", "gpio50", "gpio81"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + touchscreen: touchscreen-int-state { + pins = "gpio11"; + function = "gpio"; + output-enable; + bias-disable; + drive-strength = <2>; + }; +}; + +&pm8921 { + interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>; +}; + +&rpm { + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s4>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + vdd_ncp-supply = <&pm8921_l6>; + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + vdd_l21_l23_l29-supply = <&pm8921_s8>; + vdd_l24-supply = <&pm8921_s1>; + vdd_l25-supply = <&pm8921_s1>; + vdd_l27-supply = <&pm8921_s7>; + vdd_l28-supply = <&pm8921_s7>; + + /* Buck SMPS */ + pm8921_s1: s1 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s2: s2 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + pm8921_s3: s3 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <4800000>; + bias-pull-down; + }; + + pm8921_s4: s4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; + }; + + pm8921_s7: s7 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + qcom,switch-mode-frequency = <3200000>; + bias-pull-down; + }; + + pm8921_s8: s8 { + regulator-always-on; + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + }; + + /* PMOS LDO */ + pm8921_l1: l1 { + regulator-always-on; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + bias-pull-down; + }; + + pm8921_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8921_l3: l3 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + pm8921_l4: l4 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l5: l5 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l6: l6 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l7: l7 { + regulator-always-on; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l8: l8 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3100000>; + bias-pull-down; + }; + + pm8921_l9: l9 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + bias-pull-down; + }; + + pm8921_l10: l10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l11: l11 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + pm8921_l12: l12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + bias-pull-down; + }; + + pm8921_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + bias-pull-down; + }; + + pm8921_l16: l16 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3000000>; + bias-pull-down; + }; + + pm8921_l17: l17 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + bias-pull-down; + }; + + pm8921_l18: l18 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1500000>; + bias-pull-down; + }; + + pm8921_l21: l21 { + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <1900000>; + bias-pull-down; + }; + + pm8921_l22: l22 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + bias-pull-down; + }; + + pm8921_l23: l23 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + bias-pull-down; + }; + + pm8921_l24: l24 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1150000>; + bias-pull-down; + }; + + pm8921_l25: l25 { + regulator-always-on; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + bias-pull-down; + }; + + /* Low Voltage Switch */ + pm8921_lvs1: lvs1 { + bias-pull-down; + }; + + pm8921_lvs2: lvs2 { + bias-pull-down; + }; + + pm8921_lvs3: lvs3 { + bias-pull-down; + }; + + pm8921_lvs4: lvs4 { + bias-pull-down; + }; + + pm8921_lvs5: lvs5 { + bias-pull-down; + }; + + pm8921_lvs6: lvs6 { + bias-pull-down; + }; + + pm8921_lvs7: lvs7 { + bias-pull-down; + }; + + pm8921_ncp: ncp { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + qcom,switch-mode-frequency = <1600000>; + }; + }; +}; + +&usb_hs1_phy { + v3p3-supply = <&pm8921_l3>; + v1p8-supply = <&pm8921_l4>; +}; + +&usb1 { + dr_mode = "otg"; + status = "okay"; +}; |