diff options
Diffstat (limited to 'dts/upstream/src/arm64/sprd/whale2.dtsi')
-rw-r--r-- | dts/upstream/src/arm64/sprd/whale2.dtsi | 314 |
1 files changed, 314 insertions, 0 deletions
diff --git a/dts/upstream/src/arm64/sprd/whale2.dtsi b/dts/upstream/src/arm64/sprd/whale2.dtsi new file mode 100644 index 00000000000..7068bfd2f4c --- /dev/null +++ b/dts/upstream/src/arm64/sprd/whale2.dtsi @@ -0,0 +1,314 @@ +/* + * Spreadtrum Whale2 platform peripherals + * + * Copyright (C) 2016, Spreadtrum Communications Inc. + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +#include <dt-bindings/clock/sprd,sc9860-clk.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + soc: soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ap_ahb_regs: syscon@20210000 { + compatible = "syscon"; + reg = <0 0x20210000 0 0x10000>; + }; + + pmu_regs: syscon@402b0000 { + compatible = "syscon"; + reg = <0 0x402b0000 0 0x10000>; + }; + + aon_regs: syscon@402e0000 { + compatible = "syscon"; + reg = <0 0x402e0000 0 0x10000>; + }; + + ana_regs: syscon@40400000 { + compatible = "syscon"; + reg = <0 0x40400000 0 0x10000>; + }; + + agcp_regs: syscon@415e0000 { + compatible = "syscon"; + reg = <0 0x415e0000 0 0x1000000>; + }; + + vsp_regs: syscon@61100000 { + compatible = "syscon"; + reg = <0 0x61100000 0 0x10000>; + }; + + cam_regs: syscon@62100000 { + compatible = "syscon"; + reg = <0 0x62100000 0 0x10000>; + }; + + disp_regs: syscon@63100000 { + compatible = "syscon"; + reg = <0 0x63100000 0 0x10000>; + }; + + ap_apb_regs: syscon@70b00000 { + compatible = "syscon"; + reg = <0 0x70b00000 0 0x40000>; + }; + + ap-apb@70000000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x70000000 0x10000000>; + + uart0: serial@0 { + compatible = "sprd,sc9860-uart", + "sprd,sc9836-uart"; + reg = <0x0 0x100>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "enable", "uart", "source"; + clocks = <&apapb_gate CLK_UART0_EB>, + <&ap_clk CLK_UART0>, <&ext_26m>; + status = "disabled"; + }; + + uart1: serial@100000 { + compatible = "sprd,sc9860-uart", + "sprd,sc9836-uart"; + reg = <0x100000 0x100>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "enable", "uart", "source"; + clocks = <&apapb_gate CLK_UART1_EB>, + <&ap_clk CLK_UART1>, <&ext_26m>; + status = "disabled"; + }; + + uart2: serial@200000 { + compatible = "sprd,sc9860-uart", + "sprd,sc9836-uart"; + reg = <0x200000 0x100>; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "enable", "uart", "source"; + clocks = <&apapb_gate CLK_UART2_EB>, + <&ap_clk CLK_UART2>, <&ext_26m>; + status = "disabled"; + }; + + uart3: serial@300000 { + compatible = "sprd,sc9860-uart", + "sprd,sc9836-uart"; + reg = <0x300000 0x100>; + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "enable", "uart", "source"; + clocks = <&apapb_gate CLK_UART3_EB>, + <&ap_clk CLK_UART3>, <&ext_26m>; + status = "disabled"; + }; + }; + + ap-ahb { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ap_dma: dma-controller@20100000 { + compatible = "sprd,sc9860-dma"; + reg = <0 0x20100000 0 0x4000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + /* For backwards compatibility: */ + #dma-channels = <32>; + dma-channels = <32>; + clock-names = "enable"; + clocks = <&apahb_gate CLK_DMA_EB>; + }; + + sdio3: sdio@50430000 { + compatible = "sprd,sdhci-r11"; + reg = <0 0x50430000 0 0x1000>; + interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + + clock-names = "sdio", "enable", "2x_enable"; + clocks = <&aon_prediv CLK_EMMC_2X>, + <&apahb_gate CLK_EMMC_EB>, + <&aon_gate CLK_EMMC_2X_EN>; + assigned-clocks = <&aon_prediv CLK_EMMC_2X>; + assigned-clock-parents = <&clk_l0_409m6>; + + sprd,phy-delay-mmc-hs400 = <0x44 0x7f 0x2e 0x2e>; + sprd,phy-delay-mmc-hs200 = <0x0 0x8c 0x8c 0x8c>; + sprd,phy-delay-mmc-ddr52 = <0x3f 0x75 0x14 0x14>; + sprd,phy-delay-mmc-hs400es = <0x3f 0x3f 0x2e 0x2e>; + vmmc-supply = <&vddemmccore>; + bus-width = <8>; + non-removable; + no-sdio; + no-sd; + cap-mmc-hw-reset; + mmc-hs400-enhanced-strobe; + mmc-hs400-1_8v; + mmc-hs200-1_8v; + mmc-ddr-1_8v; + }; + }; + + aon { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + adi_bus: spi@40030000 { + compatible = "sprd,sc9860-adi"; + reg = <0 0x40030000 0 0x10000>; + hwlocks = <&hwlock 0>; + hwlock-names = "adi"; + #address-cells = <1>; + #size-cells = <0>; + }; + + timer@40050000 { + compatible = "sprd,sc9860-timer"; + reg = <0 0x40050000 0 0x20>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ext_32k>; + }; + + timer@40050020 { + compatible = "sprd,sc9860-suspend-timer"; + reg = <0 0x40050020 0 0x20>; + clocks = <&ext_32k>; + }; + + hwlock: hwspinlock@40500000 { + compatible = "sprd,hwspinlock-r3p0"; + reg = <0 0x40500000 0 0x1000>; + #hwlock-cells = <1>; + clock-names = "enable"; + clocks = <&aon_gate CLK_SPLK_EB>; + }; + + eic_debounce: gpio@40210000 { + compatible = "sprd,sc9860-eic-debounce"; + reg = <0 0x40210000 0 0x80>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + }; + + eic_latch: gpio@40210080 { + compatible = "sprd,sc9860-eic-latch"; + reg = <0 0x40210080 0 0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + }; + + eic_async: gpio@402100a0 { + compatible = "sprd,sc9860-eic-async"; + reg = <0 0x402100a0 0 0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + }; + + eic_sync: gpio@402100c0 { + compatible = "sprd,sc9860-eic-sync"; + reg = <0 0x402100c0 0 0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + }; + + ap_gpio: gpio@40280000 { + compatible = "sprd,sc9860-gpio"; + reg = <0 0x40280000 0 0x1000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + }; + + pin_controller: pinctrl@402a0000 { + compatible = "sprd,sc9860-pinctrl"; + reg = <0 0x402a0000 0 0x10000>; + }; + + watchdog@40310000 { + compatible = "sprd,sp9860-wdt"; + reg = <0 0x40310000 0 0x1000>; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + timeout-sec = <12>; + clock-names = "enable", "rtc_enable"; + clocks = <&aon_gate CLK_APCPU_WDG_EB>, + <&aon_gate CLK_AP_WDG_RTC_EB>; + }; + }; + + agcp { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + agcp_dma: dma-controller@41580000 { + compatible = "sprd,sc9860-dma"; + reg = <0 0x41580000 0 0x4000>; + #dma-cells = <1>; + /* For backwards compatibility: */ + #dma-channels = <32>; + dma-channels = <32>; + clock-names = "enable", "ashb_eb"; + clocks = <&agcp_gate CLK_AGCP_DMAAP_EB>, + <&agcp_gate CLK_AGCP_AP_ASHB_EB>; + }; + }; + }; + + ext_32k: ext_32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ext-32k"; + }; + + ext_26m: ext_26m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <26000000>; + clock-output-names = "ext-26m"; + }; + + ext_rco_100m: ext_rco_100m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "ext-rco-100m"; + }; + + clk_l0_409m6: clk_l0_409m6 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <409600000>; + clock-output-names = "ext-409m6"; + }; +}; |