diff options
Diffstat (limited to 'include/configs/M5253DEMO.h')
| -rw-r--r-- | include/configs/M5253DEMO.h | 86 |
1 files changed, 43 insertions, 43 deletions
diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index bd3c57d1438..7e37c6d1199 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -8,7 +8,7 @@ #include <linux/stringify.h> -#define CONFIG_SYS_UART_PORT (0) +#define CFG_SYS_UART_PORT (0) /* Configuration for environment @@ -20,7 +20,7 @@ env/embedded.o(.text*); #ifdef CONFIG_DRIVER_DM9000 -# define CONFIG_DM9000_BASE (CONFIG_SYS_CS1_BASE | 0x300) +# define CONFIG_DM9000_BASE (CFG_SYS_CS1_BASE | 0x300) # define DM9000_IO CONFIG_DM9000_BASE # define DM9000_DATA (CONFIG_DM9000_BASE + 4) # undef CONFIG_DM9000_DEBUG @@ -45,18 +45,18 @@ #define CONFIG_HOSTNAME "M5253DEMO" /* I2C */ -#define CONFIG_SYS_I2C_PINMUX_REG (*(u32 *) (CONFIG_SYS_MBAR+0x19C)) -#define CONFIG_SYS_I2C_PINMUX_CLR (0xFFFFE7FF) -#define CONFIG_SYS_I2C_PINMUX_SET (0) - -#undef CONFIG_SYS_PLL_BYPASS /* bypass PLL for test purpose */ -#define CONFIG_SYS_FAST_CLK -#ifdef CONFIG_SYS_FAST_CLK -# define CONFIG_SYS_PLLCR 0x1243E054 -# define CONFIG_SYS_CLK 140000000 +#define CFG_SYS_I2C_PINMUX_REG (*(u32 *) (CFG_SYS_MBAR+0x19C)) +#define CFG_SYS_I2C_PINMUX_CLR (0xFFFFE7FF) +#define CFG_SYS_I2C_PINMUX_SET (0) + +#undef CFG_SYS_PLL_BYPASS /* bypass PLL for test purpose */ +#define CFG_SYS_FAST_CLK +#ifdef CFG_SYS_FAST_CLK +# define CFG_SYS_PLLCR 0x1243E054 +# define CFG_SYS_CLK 140000000 #else -# define CONFIG_SYS_PLLCR 0x135a4140 -# define CONFIG_SYS_CLK 70000000 +# define CFG_SYS_PLLCR 0x135a4140 +# define CFG_SYS_CLK 70000000 #endif /* @@ -65,14 +65,14 @@ * You should know what you are doing if you make changes here. */ -#define CONFIG_SYS_MBAR 0x10000000 /* Register Base Addrs */ -#define CONFIG_SYS_MBAR2 0x80000000 /* Module Base Addrs 2 */ +#define CFG_SYS_MBAR 0x10000000 /* Register Base Addrs */ +#define CFG_SYS_MBAR2 0x80000000 /* Module Base Addrs 2 */ /* * Definitions for initial stack pointer and data area (in DPRAM) */ -#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ +#define CFG_SYS_INIT_RAM_ADDR 0x20000000 +#define CFG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ /* * Start addresses for the final memory configuration @@ -87,10 +87,10 @@ * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization ?? */ -#define CONFIG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) +#define CFG_SYS_BOOTMAPSZ (CFG_SYS_SDRAM_BASE + (CFG_SYS_SDRAM_SIZE << 20)) /* FLASH organization */ -#define CONFIG_SYS_FLASH_BASE (CONFIG_SYS_CS0_BASE) +#define CFG_SYS_FLASH_BASE (CFG_SYS_CS0_BASE) #define FLASH_SST6401B 0x200 #define SST_ID_xF6401B 0x236D236D @@ -101,45 +101,45 @@ * Amd/Atmel use 0x30 for sector erase, SST use 0x50. * 0x30 is block erase in SST */ -# define CONFIG_SYS_FLASH_SIZE 0x800000 +# define CFG_SYS_FLASH_SIZE 0x800000 #else -# define CONFIG_SYS_SST_SECT 2048 -# define CONFIG_SYS_SST_SECTSZ 0x1000 +# define CFG_SYS_SST_SECT 2048 +# define CFG_SYS_SST_SECTSZ 0x1000 #endif /* Cache Configuration */ -#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 8) -#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - 4) -#define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM) -#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_FLASH_BASE | \ +#define ICACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 8) +#define DCACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \ + CFG_SYS_INIT_RAM_SIZE - 4) +#define CFG_SYS_ICACHE_INV (CF_CACR_DCM) +#define CFG_SYS_CACHE_ACR0 (CFG_SYS_FLASH_BASE | \ CF_ADDRMASK(8) | \ CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ACR1 (CFG_SYS_SDRAM_BASE | \ +#define CFG_SYS_CACHE_ACR1 (CFG_SYS_SDRAM_BASE | \ CF_ADDRMASK(CFG_SYS_SDRAM_SIZE) | \ CF_ACR_EN | CF_ACR_SM_ALL) -#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \ +#define CFG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \ CF_CACR_DBWE) -#define CONFIG_SYS_CS0_BASE 0xFF800000 -#define CONFIG_SYS_CS0_MASK 0x007F0021 -#define CONFIG_SYS_CS0_CTRL 0x00001D80 +#define CFG_SYS_CS0_BASE 0xFF800000 +#define CFG_SYS_CS0_MASK 0x007F0021 +#define CFG_SYS_CS0_CTRL 0x00001D80 -#define CONFIG_SYS_CS1_BASE 0xE0000000 -#define CONFIG_SYS_CS1_MASK 0x00000001 -#define CONFIG_SYS_CS1_CTRL 0x00003DD8 +#define CFG_SYS_CS1_BASE 0xE0000000 +#define CFG_SYS_CS1_MASK 0x00000001 +#define CFG_SYS_CS1_CTRL 0x00003DD8 /*----------------------------------------------------------------------- * Port configuration */ -#define CONFIG_SYS_GPIO_FUNC 0x00000008 /* Set gpio pins: none */ -#define CONFIG_SYS_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54 */ -#define CONFIG_SYS_GPIO_EN 0x00000008 /* Set gpio output enable */ -#define CONFIG_SYS_GPIO1_EN 0x00c70000 /* Set gpio output enable */ -#define CONFIG_SYS_GPIO_OUT 0x00000008 /* Set outputs to default state */ -#define CONFIG_SYS_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ -#define CONFIG_SYS_GPIO1_LED 0x00400000 /* user led */ +#define CFG_SYS_GPIO_FUNC 0x00000008 /* Set gpio pins: none */ +#define CFG_SYS_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54 */ +#define CFG_SYS_GPIO_EN 0x00000008 /* Set gpio output enable */ +#define CFG_SYS_GPIO1_EN 0x00c70000 /* Set gpio output enable */ +#define CFG_SYS_GPIO_OUT 0x00000008 /* Set outputs to default state */ +#define CFG_SYS_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ +#define CFG_SYS_GPIO1_LED 0x00400000 /* user led */ #endif /* _M5253DEMO_H */ |