diff options
Diffstat (limited to 'include/configs/ma5d4evk.h')
| -rw-r--r-- | include/configs/ma5d4evk.h | 255 |
1 files changed, 255 insertions, 0 deletions
diff --git a/include/configs/ma5d4evk.h b/include/configs/ma5d4evk.h new file mode 100644 index 00000000000..f0d5e9d3c50 --- /dev/null +++ b/include/configs/ma5d4evk.h @@ -0,0 +1,255 @@ +/* + * DENX MA5D4 configuration + * Copyright (C) 2015 Marek Vasut <marex@denx.de> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __MA5D4EVK_CONFIG_H__ +#define __MA5D4EVK_CONFIG_H__ + +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_FIT + +#define CONFIG_TIMESTAMP /* Print image info with timestamp */ + +#include "at91-sama5_common.h" +#undef CONFIG_BOOTARGS +#define CONFIG_SYS_USE_SERIALFLASH 1 + +/* + * U-Boot Commands + */ +#define CONFIG_DOS_PARTITION +#define CONFIG_FAT_WRITE +/*#define CONFIG_LCD*/ + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EXT4 +#define CONFIG_CMD_EXT4_WRITE +#define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC +#define CONFIG_CMD_GREPENV +#define CONFIG_CMD_MII +#define CONFIG_CMD_MMC +#define CONFIG_CMD_PING +#define CONFIG_CMD_SF +#define CONFIG_CMD_USB + +/* + * Memory configurations + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS +#define CONFIG_SYS_SDRAM_SIZE 0x10000000 + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_INIT_SP_ADDR 0x210000 +#else +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) +#endif + +/* + * Environment + */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT +#define CONFIG_ENV_OFFSET 0x8000 +#define CONFIG_ENV_SIZE 0x4000 +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE +#define CONFIG_ENV_SECT_SIZE 0x1000 + +/* + * U-Boot general configurations + */ +#define CONFIG_VERSION_VARIABLE /* U-BOOT version */ + +/* + * Serial Driver + */ +#define CONFIG_ATMEL_USART +#define CONFIG_USART_BASE ATMEL_BASE_USART0 +#define CONFIG_USART_ID ATMEL_ID_USART0 + +/* + * Ethernet + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_MACB +#define CONFIG_RMII +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_MACB_SEARCH_PHY +#define CONFIG_ARP_TIMEOUT 200UL +#define CONFIG_IP_DEFRAG +#endif + +/* + * LCD + */ +#ifdef CONFIG_LCD +#define CONFIG_CMD_BMP +#define CONFIG_BMP_16BPP +#define CONFIG_BMP_24BPP +#define CONFIG_BMP_32BPP +#define LCD_BPP LCD_COLOR16 +#define LCD_OUTPUT_BPP 24 +#define CONFIG_ATMEL_HLCD +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#endif + +/* + * SD/MMC + */ +#ifdef CONFIG_CMD_MMC +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_GENERIC_ATMEL_MCI +#endif + +/* + * SPI NOR (boot memory) + */ +#ifdef CONFIG_CMD_SF +#define CONFIG_ATMEL_SPI +#define CONFIG_ATMEL_SPI0 +#define CONFIG_SPI_FLASH_ATMEL +#define CONFIG_SF_DEFAULT_BUS 0 +#define CONFIG_SF_DEFAULT_CS 0 +#define CONFIG_SF_DEFAULT_SPEED 30000000 +#endif + +/* + * USB + */ +#ifdef CONFIG_CMD_USB +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_ATMEL +#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3 +#define CONFIG_USB_STORAGE + +/* USB device */ +#define CONFIG_USB_GADGET +#define CONFIG_USB_GADGET_DUALSPEED +#define CONFIG_USB_GADGET_ATMEL_USBA +#define CONFIG_USB_ETHER +#define CONFIG_USB_ETH_RNDIS +#define CONFIG_USBNET_MANUFACTURER "DENX" +#endif + +/* + * Boot Linux + */ +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "fitImage" +#define CONFIG_BOOTARGS "console=ttyS3,115200" +#define CONFIG_LOADADDR 0x20800000 +#define CONFIG_BOOTCOMMAND "run mmc_mmc" +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_OF_LIBFDT + +/* + * Extra Environments + */ +#define CONFIG_PREBOOT "run try_bootscript" +#define CONFIG_HOSTNAME ma5d4evk + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "consdev=ttyS3\0" \ + "baudrate=115200\0" \ + "bootscript=boot.scr\0" \ + "bootdev=/dev/mmcblk1p1\0" \ + "bootpart=1:1\0" \ + "rootdev=/dev/mmcblk1p2\0" \ + "netdev=eth0\0" \ + "kernel_addr_r=0x22000000\0" \ + "update_spi_firmware_spl_addr=0x21000000\0" \ + "update_spi_firmware_spl_filename=boot.bin\0" \ + "update_spi_firmware_addr=0x22000000\0" \ + "update_spi_firmware_filename=u-boot.img\0" \ + "update_spi_firmware=" /* Update the SPI flash firmware */ \ + "if sf probe ; then " \ + "if tftp ${update_spi_firmware_spl_addr} " \ + "${update_spi_firmware_spl_filename} ; then " \ + "setenv update_spi_firmware_spl_filesize ${filesize} ; "\ + "if tftp ${update_spi_firmware_addr} " \ + "${update_spi_firmware_filename} ; then " \ + "setenv update_spi_firmware_filesize ${filesize} ; " \ + "sf update ${update_spi_firmware_spl_addr} 0x0 " \ + "${update_spi_firmware_spl_filesize} ; " \ + "sf update ${update_spi_firmware_addr} 0x10000 " \ + "${update_spi_firmware_filesize} ; " \ + "fi ; " \ + "fi ; " \ + "fi\0" \ + "addcons=" \ + "setenv bootargs ${bootargs} " \ + "console=${consdev},${baudrate}\0" \ + "addip=" \ + "setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:" \ + "${netmask}:${hostname}:${netdev}:off\0" \ + "addmisc=" \ + "setenv bootargs ${bootargs} ${miscargs}\0" \ + "addargs=run addcons addmisc\0" \ + "mmcload=" \ + "mmc rescan ; " \ + "load mmc ${bootpart} ${kernel_addr_r} ${bootfile}\0" \ + "netload=" \ + "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \ + "miscargs=nohlt panic=1\0" \ + "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \ + "nfsargs=" \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath},v3,tcp\0" \ + "mmc_mmc=" \ + "run mmcload mmcargs addargs ; " \ + "bootm ${kernel_addr_r}\0" \ + "mmc_nfs=" \ + "run mmcload nfsargs addip addargs ; " \ + "bootm ${kernel_addr_r}\0" \ + "net_mmc=" \ + "run netload mmcargs addargs ; " \ + "bootm ${kernel_addr_r}\0" \ + "net_nfs=" \ + "run netload nfsargs addip addargs ; " \ + "bootm ${kernel_addr_r}\0" \ + "try_bootscript=" \ + "mmc rescan;" \ + "if test -e mmc ${bootpart} ${bootscript} ; then " \ + "if load mmc ${bootpart} ${kernel_addr_r} ${bootscript};"\ + "then ; " \ + "echo Running bootscript... ; " \ + "source ${kernel_addr_r} ; " \ + "fi ; " \ + "fi\0" +/* SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x200000 +#define CONFIG_SPL_MAX_SIZE 0x10000 +#define CONFIG_SPL_BSS_START_ADDR 0x20000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT + +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SYS_MONITOR_LEN (512 << 10) + +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000 + +#endif /* __MA5D4EVK_CONFIG_H__ */ |