diff options
Diffstat (limited to 'include/configs/npi_imx6ull.h')
| -rw-r--r-- | include/configs/npi_imx6ull.h | 96 |
1 files changed, 96 insertions, 0 deletions
diff --git a/include/configs/npi_imx6ull.h b/include/configs/npi_imx6ull.h new file mode 100644 index 00000000000..3be9b8ff55f --- /dev/null +++ b/include/configs/npi_imx6ull.h @@ -0,0 +1,96 @@ +/* SPDX-License-Identifier: GPL-2.0+ + * + * Copyright (c) 2021 Linumiz + * Author: Navin Sankar Velliangiri <navin@linumiz.com> + */ + +#ifndef _NPI_IMX6ULL_H +#define _NPI_IMX6ULL_H + +#include <linux/sizes.h> +#include "mx6_common.h" + +/* SPL options */ +#include "imx6_spl.h" + +#define CONFIG_SYS_FSL_USDHC_NUM 1 + +/* Size of malloc() poll */ +#define CONFIG_SYS_MALLOC_LEN SZ_2M + +/* Console configs */ +#define CONFIG_MXC_UART_BASE UART1_BASE + +/* MMC Configs */ +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR + +#define CONFIG_NETMASK 255.255.255.0 + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 + +/* Physical Memory Map */ +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* environment settings */ +#if defined(CONFIG_ENV_IS_IN_MMC) +#define CONFIG_SYS_MMC_ENV_DEV 0 +#elif defined(CONFIG_ENV_IS_IN_NAND) +#undef CONFIG_ENV_SIZE +#define CONFIG_ENV_SECT_SIZE (128 << 10) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#endif + +/* NAND */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 + +/* USB Configs */ +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 + +#ifdef CONFIG_CMD_NET +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_MXC_PHYADDR 0x1 +#define CONFIG_FEC_XCV_TYPE RMII +#define CONFIG_ETHPRIME "eth0" +#endif + +#define CONFIG_IMX_THERMAL + +#define CONFIG_FEC_ENET_DEV 1 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "console=ttymxc0,115200n8\0" \ + "image=zImage\0" \ + "fdtfile=imx6ull-seeed-npi-dev-board.dtb\0" \ + "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ + "fdt_addr_r=0x82000000\0" \ + "kernel_addr_r=0x81000000\0" \ + "pxefile_addr_r=0x87100000\0" \ + "ramdisk_addr_r=0x82100000\0" \ + "scriptaddr=0x87000000\0" \ + "root=/dev/mmcblk0p2 rootwait\0" \ + BOOTENV + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(UBIFS, ubifs, 0) \ + func(PXE, pxe, na) \ + func(DHCP, dhcp, na) + +#include <config_distro_bootcmd.h> + +#endif /* _NPI_IMX6ULL_H */ |