diff options
Diffstat (limited to 'include/configs/o2mnt.h')
| -rw-r--r-- | include/configs/o2mnt.h | 77 |
1 files changed, 77 insertions, 0 deletions
diff --git a/include/configs/o2mnt.h b/include/configs/o2mnt.h new file mode 100644 index 00000000000..0c319b1c54d --- /dev/null +++ b/include/configs/o2mnt.h @@ -0,0 +1,77 @@ +/* + * (C) Copyright 2012 + * DENX Software Engineering, Anatolij Gustschin <agust@denx.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +/* + * Valid values for CONFIG_SYS_TEXT_BASE are: + * 0xFF000000 boot low boot high (standard configuration) + * 0x00100000 boot from RAM (for testing only) + */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xff000000 /* Standard: boot low */ +#endif + +/* Board specific flash config */ +#define CONFIG_SYS_FLASH_BASE 0xff000000 +#define CONFIG_SYS_FLASH_SIZE 0x01000000 /* maximum 16MB */ +/* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_SECT 128 + +/* + * Include common defines for all ifm boards + */ +#include "o2dnt-common.h" + +/* GPIO configuration */ +#define CONFIG_SYS_GPS_PORT_CONFIG 0x00002004 /* no CAN */ + +/* Other board specific configs */ +#define CONFIG_NETCONSOLE + +#define CONFIG_SYS_BOOTCS_CFG 0x00087801 +#define CONFIG_SYS_RESET_ADDRESS 0xff000000 + +#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x03f00000 /* 1 - 63 MB in DRAM */ + +#define CONFIG_BOARD_NAME "o2mnt" +#define CONFIG_BOARD_BOOTCMD "${newcmd}" +#define CONFIG_BOARD_MEM_LIMIT xstr(62) +#define BOARD_POST_CRC32_END xstr(0x01000000) + +#ifndef CONFIG_IFM_SENSOR_TYPE +#define CONFIG_IFM_SENSOR_TYPE "O2M110" +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_IFM_DEFAULT_ENV_SETTINGS \ + CONFIG_IFM_DEFAULT_ENV_OLD \ + CONFIG_IFM_DEFAULT_ENV_NEW \ + "linbot=ff060000\0" \ + "lintop=ff25ffff\0" \ + "rambot=ff260000\0" \ + "ramtop=ffc5ffff\0" \ + "jffbot=ffc60000\0" \ + "jfftop=ffffffff\0" \ + "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0" \ + "ubotop=ff03ffff\0" \ + "kernel_addr=0xff060000\0" \ + "ramdisk_addr=0xff260000\0" \ + "newcmd=run scrprot;run flash_ext2\0" \ + "scrprot=protect on ${linbot} ${lintop};protect on ${rambot} " \ + "${ramtop}\0" \ + "flash_ext2=run ext2args addip addmem;bootm ${kernel_addr}\0" \ + "ext2args=setenv bootargs root=/dev/mtdblock3 ro " \ + "rootfstype=ext2\0" \ + "pwm=mw f0000674 0x10006;mw f0000678 0x30000;" \ + "mw f0000678 0x30001;mw f0000670 0x3\0" \ + "master=mw f0000b00 0x00052006;mw f0000b0c $(IOpin);" \ + "mw f0000b04 $(IOpin);mw f0000b10 0x24;run pwm\0" \ + "sensortyp="CONFIG_IFM_SENSOR_TYPE"\0" \ + "srelease=0.00\0" |