diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/aristainetos2.h | 326 |
1 files changed, 161 insertions, 165 deletions
diff --git a/include/configs/aristainetos2.h b/include/configs/aristainetos2.h index 6e8595caad8..916bd5a59cb 100644 --- a/include/configs/aristainetos2.h +++ b/include/configs/aristainetos2.h @@ -13,14 +13,15 @@ #define CONFIG_HOSTNAME "aristainetos2" +#if (CONFIG_SYS_BOARD_VERSION == 5) #define CONFIG_MXC_UART_BASE UART2_BASE #define CONSOLE_DEV "ttymxc1" +#endif #define CONFIG_FEC_XCV_TYPE RGMII /* Framebuffer */ #define CONFIG_SYS_LDB_CLOCK 28341000 -#define CONFIG_LG4573 #include "mx6_common.h" @@ -77,6 +78,8 @@ "enable_hab_check=1\0" #else #define HAB_EXTRA_SETTINGS \ + "hab_check_addr=echo HAB check addr always returns " \ + "true;true\0" \ "hab_check_file_fit=echo HAB check FIT file always returns " \ "true;true\0" \ "hab_check_flash_fit=echo HAB check flash FIT always returns " \ @@ -86,96 +89,12 @@ "enable_hab_check=0\0" #endif -#if (CONFIG_SYS_BOARD_VERSION == 3) -#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \ - "dead=led led_red on\0" \ - "mtdids=nand0=gpmi-nand,nor0=spi0.0\0" \ - "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \ - "-(ubi-nor);gpmi-nand:-(ubi)\0" \ - "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \ - "bootmode=${bootmode} mmcpart=${mmcpart}\0" \ - "mainboot=echo Booting from SD-card ...; " \ - "run mainargs addmtd addmisc;" \ - "if test -n ${addmiscM}; then run addmiscM;fi;" \ - "if test -n ${addmiscC}; then run addmiscC;fi;" \ - "if test -n ${addmiscD}; then run addmiscD;fi;" \ - "run boot_board_type;" \ - "bootm ${fit_addr_r}\0" \ - "mainargs=setenv bootargs console=${console},${baudrate} " \ - "root=${mmcroot}\0" \ - "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \ - "${fit_file}\0" \ - "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \ - "${fit_addr_r} ${rescue_fit_file}\0" -#elif (CONFIG_SYS_BOARD_VERSION == 4) -#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \ - "dead=led led_red on;led led_red2 on;\0" \ - "mtdids=nand0=gpmi-nand,nor0=spi0.0\0" \ - "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \ - "-(ubi-nor);gpmi-nand:-(ubi)\0" \ - "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \ - "bootmode=${bootmode} mmcpart=${mmcpart}\0" \ - "mainboot=echo Booting from SD-card ...; " \ - "run mainargs addmtd addmisc;" \ - "if test -n ${addmiscM}; then run addmiscM;fi;" \ - "if test -n ${addmiscC}; then run addmiscC;fi;" \ - "if test -n ${addmiscD}; then run addmiscD;fi;" \ - "run boot_board_type;" \ - "bootm ${fit_addr_r}\0" \ - "mainargs=setenv bootargs console=${console},${baudrate} " \ - "root=${mmcroot}\0" \ - "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \ - "${fit_file}\0" \ - "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \ - "${fit_addr_r} ${rescue_fit_file}\0" -#elif (CONFIG_SYS_BOARD_VERSION == 5) -#define CONFIG_EXTRA_ENV_BOARD_SETTINGS \ - "emmcpart=1\0" \ - "emmc_rescue_part=3\0" \ - "emmcdev=1\0" \ - "emmcroot=/dev/mmcblk1p1 rootwait rw\0" \ - "dead=led led_red on\0" \ - "mtdids=nor0=spi0.0\0" \ - "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \ - "-(ubi-nor)\0" \ - "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \ - "bootmode=${bootmode} mmcpart=${mmcpart} " \ - "emmcpart=${emmcpart}\0" \ - "mainboot=echo Booting from eMMC ...; " \ - "run mainargs addmtd addmisc;" \ - "if test -n ${addmiscM}; then run addmiscM;fi;" \ - "if test -n ${addmiscC}; then run addmiscC;fi;" \ - "if test -n ${addmiscD}; then run addmiscD;fi;" \ - "run boot_board_type;" \ - "bootm ${fit_addr_r}\0" \ - "mainargs=setenv bootargs console=${console},${baudrate} " \ - "root=${emmcroot} rootfstype=ext4\0 " \ - "main_load_fit=ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \ - "${fit_file}; " \ - "imi ${fit_addr_r}\0 " \ - "rescue_load_fit=ext4load mmc ${emmcdev}:${emmc_rescue_part} " \ - "${fit_addr_r} ${rescue_fit_file};imi ${fit_addr_r}\0" -#else +#if (CONFIG_SYS_BOARD_VERSION == 5) #define CONFIG_EXTRA_ENV_BOARD_SETTINGS \ - "dead=led led_red on\0" \ - "mtdids=nand0=gpmi-nand,nor0=spi3.1\0" \ - "mtdparts=mtdparts=spi3.1:832k(u-boot),64k(env),64k(env-red)," \ - "-(ubi-nor);gpmi-nand:-(ubi)\0" \ - "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \ - "bootmode=${bootmode} mmcpart=${mmcpart}\0" \ - "mainboot=echo Booting from SD-card ...; " \ - "run mainargs addmtd addmisc;" \ - "if test -n ${addmiscM}; then run addmiscM;fi;" \ - "if test -n ${addmiscC}; then run addmiscC;fi;" \ - "if test -n ${addmiscD}; then run addmiscD;fi;" \ - "run boot_board_type;" \ - "bootm ${fit_addr_r}\0" \ - "mainargs=setenv bootargs console=${console},${baudrate} " \ - "root=${mmcroot}\0" \ - "main_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \ - "${fit_file}\0" \ - "rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \ - "${fit_addr_r} ${rescue_fit_file}\0" + "dead=while true; do; " \ + "led led_red on; sleep 1;" \ + "led led_red off; sleep 1;" \ + "done\0" #endif #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -183,17 +102,24 @@ "usb_pgood_delay=2000\0" \ "nor_bootdelay=-2\0" \ "script=u-boot.scr\0" \ - "fit_file=/boot/system.itb\0" \ - "rescue_fit_file=/boot/rescue.itb\0" \ "loadaddr=0x12000000\0" \ "fit_addr_r=0x14000000\0" \ - "uboot=/boot/u-boot.imx\0" \ "uboot_sz=d0000\0" \ "panel=lb07wv8\0" \ "splashpos=m,m\0" \ "console=" CONSOLE_DEV "\0" \ - "fdt_high=0xffffffff\0" \ - "initrd_high=0xffffffff\0" \ + "emmcroot=/dev/mmcblk1p1 rootwait rw\0" \ + "mtdids=nor0=spi0.0\0" \ + "mtdparts=mtdparts=spi0.0:832k(u-boot),64k(env),64k(env-red)," \ + "-(ubi-nor)\0" \ + "mk_fitfile_path=setenv fit_file /${sysnum}/system.itb\0" \ + "mk_rescue_fitfile_path=setenv rescue_fit_file /${rescue_sysnum}/system.itb\0" \ + "mk_uboot_path=setenv uboot /${sysnum}/u-boot.imx\0" \ + "mk_pubkey_path=setenv pubkey /${sysnum}/PCR.pem\0" \ + "mk_rescue_pubkey_path=setenv pubkey /${rescue_sysnum}/PCR.pem\0" \ + "addmisc=setenv bootargs ${bootargs} net.ifnames=0 consoleblank=0 " \ + "bootmode=${bootmode} rng_core.default_quality=1000 " \ + "mmcpart=${mmcpart} emmcpart=${emmcpart} sysnum=${sysnum}\0" \ "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ "boot_board_type=bootm ${fit_addr_r}#${board_type}\0" \ "get_env=mw ${loadaddr} 0 0x20000;" \ @@ -205,7 +131,7 @@ "sf protect unlock 0 0x1000000;" \ "mw ${loadaddr} 0 0x20000;" \ "env export -t ${loadaddr} serial# ethaddr " \ - "board_type panel addmisc addmiscM addmiscC addmiscD;" \ + "board_type panel;" \ "env default -a;" \ "env import -t ${loadaddr}\0" \ "loadbootscript=" \ @@ -216,28 +142,62 @@ "loadbootscriptUSBf=" \ "fatload usb 0 ${loadaddr} ${script};\0" \ "bootscriptUSB=echo Running bootscript from usb-stick ...; " \ - "source\0" \ + "source \0" \ "bootscript=echo Running bootscript from mmc ...; " \ - "source\0" \ + "source \0" \ "mmcpart=1\0" \ - "mmcrescuepart=3\0" \ "mmcdev=0\0" \ + "emmcpart=1\0" \ + "emmcdev=1\0" \ + "sysnum=1\0" \ + "rescue_sysnum=0\0" \ + "rreason=18\0" \ + "mainboot=echo Booting from eMMC ...; " \ + "run mainargs addmtd addmisc;" \ + "run boot_board_type;" \ + "bootm ${fit_addr_r}\0" \ + "mainargs=setenv bootargs console=${console},${baudrate} " \ + "root=${emmcroot} rootfstype=ext4\0 " \ + "main_load_fit=run mk_fitfile_path; " \ + "ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \ + "${fit_file}; " \ + "imi ${fit_addr_r}\0 " \ + "rescue_load_fit=run mk_rescue_fitfile_path; " \ + "ext4load mmc ${emmcdev}:${emmcpart} ${fit_addr_r} " \ + "${rescue_fit_file}; " \ + "imi ${fit_addr_r}\0" \ + "main_load_pubkey=run mk_pubkey_path; " \ + "setenv hab_check_filetype \"PCR.pem\";" \ + "env set check_addr ${loadaddr};" \ + "ext4load mmc ${emmcdev}:${emmcpart} ${loadaddr} " \ + "${pubkey}\0" \ + "rescue_load_pubkey=run mk_rescue_pubkey_path; " \ + "setenv hab_check_filetype \"PCR.pem\";" \ + "env set check_addr ${loadaddr};" \ + "ext4load mmc ${emmcdev}:${emmcpart} ${loadaddr} " \ + "${pubkey}\0" \ + "mainRargs=setenv bootargs console=${console},${baudrate} " \ + "rescue_sysnum=${rescue_sysnum} root=${emmcroot} rootfstype=ext4\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ "root=${mmcroot}\0" \ + "mmcRargs=setenv bootargs console=${console},${baudrate} " \ + "rescue_sysnum=${rescue_sysnum} root=${mmcroot}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs addmtd addmisc;" \ - "if test -n ${addmiscM}; then run addmiscM;fi;" \ - "if test -n ${addmiscC}; then run addmiscC;fi;" \ - "if test -n ${addmiscD}; then run addmiscD;fi;" \ "run boot_board_type;" \ "bootm ${fit_addr_r}\0" \ - "mmc_load_fit=ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \ + "mmc_load_fit=run mk_fitfile_path; " \ + "ext4load mmc ${mmcdev}:${mmcpart} ${fit_addr_r} " \ "${fit_file}\0" \ - "mmc_load_uboot=ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \ - "${uboot}\0" \ - "mmc_rescue_load_fit=ext4load mmc ${mmcdev}:${mmcrescuepart} " \ + "imi ${fit_addr_r}\0" \ + "mmc_rescue_load_fit=run mk_rescue_fitfile_path; " \ + "ext4load mmc ${mmcdev}:${mmcpart} " \ "${fit_addr_r} ${rescue_fit_file}\0" \ + "imi ${fit_addr_r}\0" \ + "mmc_load_uboot=run mk_uboot_path; " \ + "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \ + "${uboot}\0" \ "mmc_upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \ "setexpr cmp_buf ${loadaddr} + ${uboot_sz};" \ "setexpr uboot_maxsize ${uboot_sz} - 400;" \ @@ -246,14 +206,19 @@ "sf write ${loadaddr} 400 ${filesize};" \ "sf read ${cmp_buf} 400 ${uboot_sz};" \ "cmp.b ${loadaddr} ${cmp_buf} ${uboot_maxsize}\0" \ - "rescueargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/ram rw\0 " \ + "mmc_load_pubkey=run mk_pubkey_path; " \ + "setenv hab_check_filetype \"PCR.pem\";" \ + "env set check_addr ${loadaddr};" \ + "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \ + "${pubkey}\0" \ + "mmc_rescue_load_pubkey=run mk_rescue_pubkey_path; " \ + "setenv hab_check_filetype \"PCR.pem\";" \ + "env set check_addr ${loadaddr};" \ + "ext4load mmc ${mmcdev}:${mmcpart} ${loadaddr} " \ + "${pubkey}\0" \ "rescueboot=echo Booting rescue system ...; " \ - "run rescueargs addmtd addmisc;" \ + "run addmtd addmisc;" \ "if test -n ${rescue_reason}; then run rescue_reason;fi;" \ - "if test -n ${addmiscM}; then run addmiscM;fi;" \ - "if test -n ${addmiscC}; then run addmiscC;fi;" \ - "if test -n ${addmiscD}; then run addmiscD;fi;" \ "run boot_board_type;" \ "if bootm ${fit_addr_r}; then ; " \ "else " \ @@ -261,50 +226,73 @@ "fi; \0" \ "r_reason_syserr=setenv rescue_reason setenv bootargs " \ "\\\\${bootargs} " \ - "rescueReason=18\0 " \ - "usb_load_fit=ext4load usb 0 ${fit_addr_r} ${fit_file}\0" \ - "usb_load_fitf=fatload usb 0 ${fit_addr_r} ${fit_file}\0" \ - "usb_load_rescuefit=ext4load usb 0 ${fit_addr_r} " \ + "rescueReason=$rreason\0 " \ + "usb_load_fit=run mk_fitfile_path; " \ + "ext4load usb 0 ${fit_addr_r} ${fit_file}\0" \ + "usb_load_fitf=run mk_fitfile_path; " \ + "fatload usb 0 ${fit_addr_r} ${fit_file}\0" \ + "usb_load_rescuefit=run mk_rescue_fitfile_path; " \ + "ext4load usb 0 ${fit_addr_r} " \ "${rescue_fit_file}\0" \ - "usb_load_rescuefitf=fatload usb 0 ${fit_addr_r} " \ + "usb_load_rescuefitf=run mk_rescue_fitfile_path; " \ + "fatload usb 0 ${fit_addr_r} " \ "${rescue_fit_file}\0" \ + "usb_load_pubkey=run mk_pubkey_path; " \ + "setenv hab_check_filetype \"PCR.pem\";" \ + "env set check_addr ${loadaddr};" \ + "ext4load usb 0 ${loadaddr} ${pubkey}\0" \ + "usb_rescue_load_pubkey=run mk_rescue_pubkey_path; " \ + "setenv hab_check_filetype \"PCR.pem\";" \ + "env set check_addr ${loadaddr};" \ + "ext4load usb 0 ${loadaddr} ${pubkey}\0" \ + "usb_load_pubkeyf=run mk_pubkey_path; " \ + "setenv hab_check_filetype \"PCR.pem\";" \ + "env set check_addr ${loadaddr};" \ + "fatload usb 0 ${loadaddr} ${pubkey}\0" \ + "usb_rescue_load_pubkeyf=run mk_rescue_pubkey_path; " \ + "setenv hab_check_filetype \"PCR.pem\";" \ + "env set check_addr ${loadaddr};" \ + "fatload usb 0 ${loadaddr} ${pubkey}\0" \ "usbroot=/dev/sda1 rootwait rw\0" \ "usbboot=echo Booting from usb-stick ...; " \ "run usbargs addmtd addmisc;" \ - "if test -n ${addmiscM}; then run addmiscM;fi;" \ - "if test -n ${addmiscC}; then run addmiscC;fi;" \ - "if test -n ${addmiscD}; then run addmiscD;fi;" \ "run boot_board_type;" \ "bootm ${fit_addr_r}\0" \ "usbargs=setenv bootargs console=${console},${baudrate} " \ "root=${usbroot}\0" \ + "usbRargs=setenv bootargs console=${console},${baudrate} " \ + "rescue_sysnum=${rescue_sysnum} root=${usbroot} rw\0 " \ "mmc_rescue_boot=" \ "run r_reason_syserr;" \ - "if run mmc_rescue_load_fit hab_check_file_fit; then " \ - "run rescueboot; " \ + "if run mmc_rescue_load_pubkey hab_check_addr " \ + "mmc_rescue_load_fit hab_check_file_fit; then " \ + "run mmcRargs; run rescueboot; " \ "else " \ - "run dead; " \ "echo RESCUE SYSTEM FROM SD-CARD BOOT FAILURE;" \ + "run dead; " \ "fi;\0" \ "main_rescue_boot=" \ - "if run main_load_fit hab_check_flash_fit; then " \ + "if run main_load_pubkey hab_check_addr " \ + "main_load_fit hab_check_flash_fit; then " \ "if run mainboot; then ; " \ "else " \ "run r_reason_syserr;" \ - "if run rescue_load_fit hab_check_file_fit;" \ - "then run rescueboot; " \ + "if run rescue_load_pubkey hab_check_addr " \ + "rescue_load_fit hab_check_file_fit; then " \ + "run mainRargs; run rescueboot; " \ "else " \ - "run dead; " \ "echo RESCUE SYSTEM BOOT FAILURE;" \ + "run dead; " \ "fi; " \ "fi; " \ "else " \ "run r_reason_syserr;" \ - "if run rescue_load_fit hab_check_file_fit; then " \ - "run rescueboot; " \ + "if run rescue_load_pubkey hab_check_addr " \ + "rescue_load_fit hab_check_file_fit; then " \ + "run mainRargs; run rescueboot; " \ "else " \ - "run dead; " \ "echo RESCUE SYSTEM BOOT FAILURE;" \ + "run dead; " \ "fi; " \ "fi;\0" \ "usb_mmc_rescue_boot=" \ @@ -318,17 +306,21 @@ "hab_check_file_bootscript;" \ "then run bootscriptUSB; " \ "fi; " \ - "if run usb_load_fit hab_check_file_fit; then " \ + "if run usb_load_pubkey hab_check_addr " \ + "usb_load_fit hab_check_file_fit; then " \ "run usbboot; " \ "fi; " \ - "if run usb_load_fitf hab_check_file_fit; then " \ + "if run usb_load_pubkeyf hab_check_addr " \ + "usb_load_fitf hab_check_file_fit; then " \ "run usbboot; " \ "fi; "\ - "if run usb_load_rescuefit hab_check_file_fit;" \ - "then run r_reason_syserr rescueboot;" \ + "if run usb_rescue_load_pubkey hab_check_addr " \ + "usb_load_rescuefit hab_check_file_fit; then " \ + "run r_reason_syserr usbRargs; run rescueboot;" \ "fi; " \ - "if run usb_load_rescuefitf hab_check_file_fit;" \ - "then run r_reason_syserr rescueboot;" \ + "if run usb_rescue_load_pubkeyf hab_check_addr " \ + "usb_load_rescuefitf hab_check_file_fit; then " \ + "run r_reason_syserr usbRargs; run rescueboot;" \ "fi; " \ "run mmc_rescue_boot;" \ "fi; "\ @@ -338,48 +330,57 @@ "if test ${bootmode} -ne 0 ; then " \ "mmc dev ${mmcdev};" \ "if mmc rescan; then " \ - "if run mmc_rescue_load_fit " \ - "hab_check_file_fit; then " \ - "run rescueboot; " \ + "if run mmc_rescue_load_pubkey " \ + "hab_check_addr " \ + "mmc_rescue_load_fit " \ + "hab_check_file_fit; then " \ + "run mmcRargs; run rescueboot; " \ "else " \ "usb start;" \ "if usb storage; then " \ - "if run usb_load_rescuefit " \ - "hab_check_file_fit;"\ - "then " \ - "run rescueboot;" \ + "if run usb_rescue_load_pubkey " \ + "hab_check_addr " \ + "usb_load_rescuefit " \ + "hab_check_file_fit; then " \ + "run usbRargs; run rescueboot;" \ "fi; " \ - "if run usb_load_rescuefitf "\ - "hab_check_file_fit;"\ - "then " \ - "run rescueboot;" \ + "if run usb_rescue_load_pubkeyf " \ + "hab_check_addr " \ + "usb_load_rescuefitf " \ + "hab_check_file_fit; then " \ + "run usbRargs; run rescueboot;" \ "fi; " \ "fi;" \ "fi;" \ - "run dead; " \ "echo RESCUE SYSTEM ON SD OR " \ "USB BOOT FAILURE;" \ + "run dead; " \ "else " \ "usb start;" \ "if usb storage; then " \ - "if run usb_load_rescuefit " \ - "hab_check_file_fit; then " \ - "run rescueboot;" \ + "if run usb_rescue_load_pubkey " \ + "hab_check_addr " \ + "usb_load_rescuefit " \ + "hab_check_file_fit; then " \ + "run usbRargs; run rescueboot;" \ "fi; " \ - "if run usb_load_rescuefitf " \ - "hab_check_file_fit; then " \ - "run rescueboot;" \ + "if run usb_rescue_load_pubkeyf " \ + "hab_check_addr " \ + "usb_load_rescuefitf " \ + "hab_check_file_fit; then " \ + "run usbRargs; run rescueboot;" \ "fi; " \ "fi;" \ - "run dead; " \ "echo RESCUE SYSTEM ON USB BOOT FAILURE;" \ + "run dead; " \ "fi; " \ "else "\ - "if run rescue_load_fit hab_check_file_fit; then " \ - "run rescueboot; " \ + "if run rescue_load_pubkey hab_check_addr " \ + "rescue_load_fit hab_check_file_fit; then " \ + "run mainRargs; run rescueboot; " \ "else " \ - "run dead; " \ "echo RESCUE SYSTEM ON BOARD BOOT FAILURE;" \ + "run dead; " \ "fi; " \ "fi;\0" \ "ari_boot=if test ${bootmode} -ne 0 ; then " \ @@ -388,7 +389,8 @@ "if run loadbootscript hab_check_file_bootscript;" \ "then run bootscript; " \ "fi; " \ - "if run mmc_load_fit hab_check_file_fit; then " \ + "if run mmc_load_pubkey hab_check_addr " \ + "mmc_load_fit hab_check_file_fit; then " \ "if run mmcboot; then ; " \ "else " \ "run mmc_rescue_boot;" \ @@ -421,12 +423,6 @@ #define CONFIG_SYS_FSL_USDHC_NUM 2 -/* NAND stuff */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_5_ADDR_CYCLE -#define CONFIG_SYS_NAND_ONFI_DETECTION - /* DMA stuff, needed for GPMI/MXS NAND support */ /* USB Configs */ |