diff options
Diffstat (limited to 'include/pc_keyb.h')
| -rw-r--r-- | include/pc_keyb.h | 121 |
1 files changed, 0 insertions, 121 deletions
diff --git a/include/pc_keyb.h b/include/pc_keyb.h deleted file mode 100644 index 5ba99e35a2e..00000000000 --- a/include/pc_keyb.h +++ /dev/null @@ -1,121 +0,0 @@ -/* - * include/linux/pc_keyb.h - * - * PC Keyboard And Keyboard Controller - * - * (c) 1997 Martin Mares <mj@atrey.karlin.mff.cuni.cz> - */ - -/* - * Configuration Switches - */ -#undef KBD_REPORT_ERR /* Report keyboard errors */ -#define KBD_REPORT_UNKN /* Report unknown scan codes */ -#define KBD_REPORT_TIMEOUTS /* Report keyboard timeouts */ -#undef KBD_IS_FOCUS_9000 /* We have the brain-damaged FOCUS-9000 keyboard */ -#undef INITIALIZE_MOUSE /* Define if your PS/2 mouse needs initialization. */ - -#define KBD_INIT_TIMEOUT 1000 /* Timeout in ms for initializing the keyboard */ -#define KBC_TIMEOUT 250 /* Timeout in ms for sending to keyboard controller */ -#define KBD_TIMEOUT 1000 /* Timeout in ms for keyboard command acknowledge */ - -/* - * Internal variables of the driver - */ -extern unsigned char pckbd_read_mask; -extern unsigned char aux_device_present; - -/* - * Keyboard Controller Registers on normal PCs. - */ -#define KBD_STATUS_REG 0x64 /* Status register (R) */ -#define KBD_CNTL_REG 0x64 /* Controller command register (W) */ -#define KBD_DATA_REG 0x60 /* Keyboard data register (R/W) */ - -/* - * Keyboard Controller Commands - */ -#define KBD_CCMD_READ_MODE 0x20 /* Read mode bits */ -#define KBD_CCMD_WRITE_MODE 0x60 /* Write mode bits */ -#define KBD_CCMD_GET_VERSION 0xA1 /* Get controller version */ -#define KBD_CCMD_MOUSE_DISABLE 0xA7 /* Disable mouse interface */ -#define KBD_CCMD_MOUSE_ENABLE 0xA8 /* Enable mouse interface */ -#define KBD_CCMD_TEST_MOUSE 0xA9 /* Mouse interface test */ -#define KBD_CCMD_SELF_TEST 0xAA /* Controller self test */ -#define KBD_CCMD_KBD_TEST 0xAB /* Keyboard interface test */ -#define KBD_CCMD_KBD_DISABLE 0xAD /* Keyboard interface disable */ -#define KBD_CCMD_KBD_ENABLE 0xAE /* Keyboard interface enable */ -#define KBD_CCMD_WRITE_AUX_OBUF 0xD3 /* Write to output buffer as if - initiated by the auxiliary device */ -#define KBD_CCMD_WRITE_MOUSE 0xD4 /* Write the following byte to the mouse */ - -/* - * Keyboard Commands - */ -#define KBD_CMD_SET_LEDS 0xED /* Set keyboard leds */ -#define KBD_CMD_SET_RATE 0xF3 /* Set typematic rate */ -#define KBD_CMD_ENABLE 0xF4 /* Enable scanning */ -#define KBD_CMD_DISABLE 0xF5 /* Disable scanning */ -#define KBD_CMD_RESET 0xFF /* Reset */ - -/* - * Keyboard Replies - */ -#define KBD_REPLY_POR 0xAA /* Power on reset */ -#define KBD_REPLY_ACK 0xFA /* Command ACK */ -#define KBD_REPLY_RESEND 0xFE /* Command NACK, send the cmd again */ - -/* - * Status Register Bits - */ -#define KBD_STAT_OBF 0x01 /* Keyboard output buffer full */ -#define KBD_STAT_IBF 0x02 /* Keyboard input buffer full */ -#define KBD_STAT_SELFTEST 0x04 /* Self test successful */ -#define KBD_STAT_CMD 0x08 /* Last write was a command write (0=data) */ -#define KBD_STAT_UNLOCKED 0x10 /* Zero if keyboard locked */ -#define KBD_STAT_MOUSE_OBF 0x20 /* Mouse output buffer full */ -#define KBD_STAT_GTO 0x40 /* General receive/xmit timeout */ -#define KBD_STAT_PERR 0x80 /* Parity error */ - -#define AUX_STAT_OBF (KBD_STAT_OBF | KBD_STAT_MOUSE_OBF) - -/* - * Controller Mode Register Bits - */ -#define KBD_MODE_KBD_INT 0x01 /* Keyboard data generate IRQ1 */ -#define KBD_MODE_MOUSE_INT 0x02 /* Mouse data generate IRQ12 */ -#define KBD_MODE_SYS 0x04 /* The system flag (?) */ -#define KBD_MODE_NO_KEYLOCK 0x08 /* The keylock doesn't affect the keyboard if set */ -#define KBD_MODE_DISABLE_KBD 0x10 /* Disable keyboard interface */ -#define KBD_MODE_DISABLE_MOUSE 0x20 /* Disable mouse interface */ -#define KBD_MODE_KCC 0x40 /* Scan code conversion to PC format */ -#define KBD_MODE_RFU 0x80 - -/* - * Mouse Commands - */ -#define AUX_SET_RES 0xE8 /* Set resolution */ -#define AUX_SET_SCALE11 0xE6 /* Set 1:1 scaling */ -#define AUX_SET_SCALE21 0xE7 /* Set 2:1 scaling */ -#define AUX_GET_SCALE 0xE9 /* Get scaling factor */ -#define AUX_SET_STREAM 0xEA /* Set stream mode */ -#define AUX_SET_SAMPLE 0xF3 /* Set sample rate */ -#define AUX_ENABLE_DEV 0xF4 /* Enable aux device */ -#define AUX_DISABLE_DEV 0xF5 /* Disable aux device */ -#define AUX_RESET 0xFF /* Reset aux device */ -#define AUX_ACK 0xFA /* Command byte ACK. */ - -#define AUX_BUF_SIZE 2048 /* This might be better divisible by - three to make overruns stay in sync - but then the read function would need - a lock etc - ick */ - -#if 0 -struct aux_queue { - unsigned long head; - unsigned long tail; - wait_queue_head_t proc_list; - struct fasync_struct *fasync; - unsigned char buf[AUX_BUF_SIZE]; -}; -#endif |