diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/dm/uclass-id.h | 1 | ||||
| -rw-r--r-- | include/fwu.h | 311 | ||||
| -rw-r--r-- | include/fwu_mdata.h | 67 |
3 files changed, 379 insertions, 0 deletions
diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index 4b2c3234525..1f3cf8c0853 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -59,6 +59,7 @@ enum uclass_id { UCLASS_FPGA, /* FPGA device */ UCLASS_FUZZING_ENGINE, /* Fuzzing engine */ UCLASS_FS_FIRMWARE_LOADER, /* Generic loader */ + UCLASS_FWU_MDATA, /* FWU Metadata Access */ UCLASS_GPIO, /* Bank of general-purpose I/O pins */ UCLASS_HASH, /* Hash device */ UCLASS_HWSPINLOCK, /* Hardware semaphores */ diff --git a/include/fwu.h b/include/fwu.h new file mode 100644 index 00000000000..a83ea19534c --- /dev/null +++ b/include/fwu.h @@ -0,0 +1,311 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (c) 2022, Linaro Limited + */ + +#if !defined _FWU_H_ +#define _FWU_H_ + +#include <blk.h> +#include <efi.h> + +#include <linux/types.h> + +struct fwu_mdata; +struct udevice; + +/** + * @mdata_check: check the validity of the FWU metadata partitions + * @get_mdata() - Get a FWU metadata copy + * @update_mdata() - Update the FWU metadata copy + */ +struct fwu_mdata_ops { + /** + * check_mdata() - Check if the FWU metadata is valid + * @dev: FWU device + * + * Validate both copies of the FWU metadata. If one of the copies + * has gone bad, restore it from the other copy. + * + * Return: 0 if OK, -ve on error + */ + int (*check_mdata)(struct udevice *dev); + + /** + * get_mdata() - Get a FWU metadata copy + * @dev: FWU device + * @mdata: Pointer to FWU metadata + * + * Get a valid copy of the FWU metadata. + * + * Return: 0 if OK, -ve on error + */ + int (*get_mdata)(struct udevice *dev, struct fwu_mdata *mdata); + + /** + * update_mdata() - Update the FWU metadata + * @dev: FWU device + * @mdata: Copy of the FWU metadata + * + * Update the FWU metadata structure by writing to the + * FWU metadata partitions. + * + * Return: 0 if OK, -ve on error + */ + int (*update_mdata)(struct udevice *dev, struct fwu_mdata *mdata); + + /** + * get_mdata_part_num() - Get the FWU metadata partition numbers + * @dev: FWU metadata device + * @mdata_parts: array for storing the metadata partition numbers + * + * Get the partition numbers on the storage device on which the + * FWU metadata is stored. Two partition numbers will be returned. + * + * Return: 0 if OK, -ve on error + */ + int (*get_mdata_part_num)(struct udevice *dev, uint *mdata_parts); + + /** + * read_mdata_partition() - Read the FWU metadata from a partition + * @dev: FWU metadata device + * @mdata: Copy of the FWU metadata + * @part_num: Partition number from which FWU metadata is to be read + * + * Read the FWU metadata from the specified partition number + * + * Return: 0 if OK, -ve on error + */ + int (*read_mdata_partition)(struct udevice *dev, + struct fwu_mdata *mdata, uint part_num); + + /** + * write_mdata_partition() - Write the FWU metadata to a partition + * @dev: FWU metadata device + * @mdata: Copy of the FWU metadata + * @part_num: Partition number to which FWU metadata is to be written + * + * Write the FWU metadata to the specified partition number + * + * Return: 0 if OK, -ve on error + */ + int (*write_mdata_partition)(struct udevice *dev, + struct fwu_mdata *mdata, uint part_num); +}; + +#define FWU_MDATA_VERSION 0x1 + +/* +* GUID value defined in the FWU specification for identification +* of the FWU metadata partition. +*/ +#define FWU_MDATA_GUID \ + EFI_GUID(0x8a7a84a0, 0x8387, 0x40f6, 0xab, 0x41, \ + 0xa8, 0xb9, 0xa5, 0xa6, 0x0d, 0x23) + +/** + * fwu_check_mdata_validity() - Check for validity of the FWU metadata copies + * + * Read both the metadata copies from the storage media, verify their + * checksum, and ascertain that both copies match. If one of the copies + * has gone bad, restore it from the good copy. + * + * Return: 0 if OK, -ve on error + * + */ +int fwu_check_mdata_validity(void); + +/** + * fwu_get_mdata_part_num() - Get the FWU metadata partition numbers + * @dev: FWU metadata device + * @mdata_parts: array for storing the metadata partition numbers + * + * Get the partition numbers on the storage device on which the + * FWU metadata is stored. Two partition numbers will be returned + * through the array. + * + * Return: 0 if OK, -ve on error + * + */ +int fwu_get_mdata_part_num(struct udevice *dev, uint *mdata_parts); + +/** + * fwu_read_mdata_partition() - Read the FWU metadata from a partition + * @dev: FWU metadata device + * @mdata: Copy of the FWU metadata + * @part_num: Partition number from which FWU metadata is to be read + * + * Read the FWU metadata from the specified partition number + * + * Return: 0 if OK, -ve on error + * + */ +int fwu_read_mdata_partition(struct udevice *dev, struct fwu_mdata *mdata, + uint part_num); + +/** + * fwu_write_mdata_partition() - Write the FWU metadata to a partition + * @dev: FWU metadata device + * @mdata: Copy of the FWU metadata + * @part_num: Partition number to which FWU metadata is to be written + * + * Write the FWU metadata to the specified partition number + * + * Return: 0 if OK, -ve on error + * + */ +int fwu_write_mdata_partition(struct udevice *dev, struct fwu_mdata *mdata, + uint part_num); + +/** + * fwu_get_mdata() - Get a FWU metadata copy + * @dev: FWU metadata device + * @mdata: Copy of the FWU metadata + * + * Get a valid copy of the FWU metadata. + * + * Note: This function is to be called first when modifying any fields + * in the metadata. The sequence of calls to modify any field in the + * metadata would be 1) fwu_get_mdata 2) Modify metadata, followed by + * 3) fwu_update_mdata + * + * Return: 0 if OK, -ve on error + * + */ +int fwu_get_mdata(struct udevice *dev, struct fwu_mdata *mdata); + +/** + * fwu_update_mdata() - Update the FWU metadata + * @dev: FWU metadata device + * @mdata: Copy of the FWU metadata + * + * Update the FWU metadata structure by writing to the + * FWU metadata partitions. + * + * Note: This function is not to be called directly to update the + * metadata fields. The sequence of function calls should be + * 1) fwu_get_mdata() 2) Modify the medata fields 3) fwu_update_mdata() + * + * The sequence of updating the partitions should be, update the + * primary metadata partition (first partition encountered), followed + * by updating the secondary partition. With this update sequence, in + * the rare scenario that the two metadata partitions are valid but do + * not match, maybe due to power outage at the time of updating the + * metadata copies, the secondary partition can be updated from the + * primary. + * + * Return: 0 if OK, -ve on error + * + */ +int fwu_update_mdata(struct udevice *dev, struct fwu_mdata *mdata); + +/** + * fwu_get_active_index() - Get active_index from the FWU metadata + * @active_idxp: active_index value to be read + * + * Read the active_index field from the FWU metadata and place it in + * the variable pointed to be the function argument. + * + * Return: 0 if OK, -ve on error + * + */ +int fwu_get_active_index(uint *active_idxp); + +/** + * fwu_set_active_index() - Set active_index in the FWU metadata + * @active_idx: active_index value to be set + * + * Update the active_index field in the FWU metadata + * + * Return: 0 if OK, -ve on error + * + */ +int fwu_set_active_index(uint active_idx); + +/** + * fwu_get_image_index() - Get the Image Index to be used for capsule update + * @image_index: The Image Index for the image + * + * The FWU multi bank update feature computes the value of image_index at + * runtime, based on the bank to which the image needs to be written to. + * Derive the image_index value for the image. + * + * Currently, the capsule update driver uses the DFU framework for + * the updates. This function gets the DFU alt number which is to + * be used as the Image Index + * + * Return: 0 if OK, -ve on error + * + */ +int fwu_get_image_index(u8 *image_index); + +/** + * fwu_mdata_check() - Check if the FWU metadata is valid + * @dev: FWU metadata device + * + * Validate both copies of the FWU metadata. If one of the copies + * has gone bad, restore it from the other copy. + * + * Return: 0 if OK, -ve on error + * + */ +int fwu_mdata_check(struct udevice *dev); + +/** + * fwu_revert_boot_index() - Revert the active index in the FWU metadata + * + * Revert the active_index value in the FWU metadata, by swapping the values + * of active_index and previous_active_index in both copies of the + * FWU metadata. + * + * Return: 0 if OK, -ve on error + * + */ +int fwu_revert_boot_index(void); + +/** + * fwu_verify_mdata() - Verify the FWU metadata + * @mdata: FWU metadata structure + * @pri_part: FWU metadata partition is primary or secondary + * + * Verify the FWU metadata by computing the CRC32 for the metadata + * structure and comparing it against the CRC32 value stored as part + * of the structure. + * + * Return: 0 if OK, -ve on error + * + */ +int fwu_verify_mdata(struct fwu_mdata *mdata, bool pri_part); + +/** + * fwu_accept_image() - Set the Acceptance bit for the image + * @img_type_id: GUID of the image type for which the accepted bit is to be + * cleared + * @bank: Bank of which the image's Accept bit is to be set + * + * Set the accepted bit for the image specified by the img_guid parameter. This + * indicates acceptance of image for subsequent boots by some governing component + * like OS(or firmware). + * + * Return: 0 if OK, -ve on error + * + */ +int fwu_accept_image(efi_guid_t *img_type_id, u32 bank); + +/** + * fwu_clear_accept_image() - Clear the Acceptance bit for the image + * @img_type_id: GUID of the image type for which the accepted bit is to be + * cleared + * @bank: Bank of which the image's Accept bit is to be cleared + * + * Clear the accepted bit for the image type specified by the img_type_id parameter. + * This function is called after the image has been updated. The accepted bit is + * cleared to be set subsequently after passing the image acceptance criteria, by + * either the OS(or firmware) + * + * Return: 0 if OK, -ve on error + * + */ +int fwu_clear_accept_image(efi_guid_t *img_type_id, u32 bank); + +#endif /* _FWU_H_ */ diff --git a/include/fwu_mdata.h b/include/fwu_mdata.h new file mode 100644 index 00000000000..8fda4f4ac22 --- /dev/null +++ b/include/fwu_mdata.h @@ -0,0 +1,67 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (c) 2022, Linaro Limited + */ + +#if !defined _FWU_MDATA_H_ +#define _FWU_MDATA_H_ + +#include <efi.h> + +/** + * struct fwu_image_bank_info - firmware image information + * @image_uuid: Guid value of the image in this bank + * @accepted: Acceptance status of the image + * @reserved: Reserved + * + * The structure contains image specific fields which are + * used to identify the image and to specify the image's + * acceptance status + */ +struct fwu_image_bank_info { + efi_guid_t image_uuid; + uint32_t accepted; + uint32_t reserved; +}; + +/** + * struct fwu_image_entry - information for a particular type of image + * @image_type_uuid: Guid value for identifying the image type + * @location_uuid: Guid of the storage volume where the image is located + * @img_bank_info: Array containing properties of images + * + * This structure contains information on various types of updatable + * firmware images. Each image type then contains an array of image + * information per bank. + */ +struct fwu_image_entry { + efi_guid_t image_type_uuid; + efi_guid_t location_uuid; + struct fwu_image_bank_info img_bank_info[CONFIG_FWU_NUM_BANKS]; +}; + +/** + * struct fwu_mdata - FWU metadata structure for multi-bank updates + * @crc32: crc32 value for the FWU metadata + * @version: FWU metadata version + * @active_index: Index of the bank currently used for booting images + * @previous_active_inde: Index of the bank used before the current bank + * being used for booting + * @img_entry: Array of information on various firmware images that can + * be updated + * + * This structure is used to store all the needed information for performing + * multi bank updates on the platform. This contains info on the bank being + * used to boot along with the information needed for identification of + * individual images + */ +struct fwu_mdata { + uint32_t crc32; + uint32_t version; + uint32_t active_index; + uint32_t previous_active_index; + + struct fwu_image_entry img_entry[CONFIG_FWU_NUM_IMAGES_PER_BANK]; +}; + +#endif /* _FWU_MDATA_H_ */ |