aboutsummaryrefslogtreecommitdiff
path: root/.gitlab-ci.yml
AgeCommit message (Collapse)Author
2021-10-21CI: Switch running the nokia_rx51 test with in-container toolchainTom Rini
Instead of fetching an arm toolchain to use, run the test with the one that's already in the container image. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
2021-10-14CI: Update to LLVM-13Tom Rini
- Switch sources and CI scripts to install and use LLVM-13 - Update to latest "focal" tag. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-30Azure/GitLab CI: Update docker imageTom Rini
Rebuild our current docker image so that ca-certificates will be updated and Let's Encrypt issued certificates will work again. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-24ARM: vexpress_ca9x4: Reintroduce board in order to use with QEMU.Kristian Amlie
vexpress_ca9x4 is seemingly the only board except for qemu_arm which is able to run U-Boot correctly, using the `-M vexpress-a9` option to QEMU. Building for qemu_arm and running qemu-system-arm with the `-M virt` argument has a number of downsides, most importantly that it only supports virtio storage drivers. This significantly reduces its usefulness in testing memory card and Flash solutions, especially when the tested images are from a third party source. So therefore we reintroduce the vexpress_ca9x4 board in this commit, with the explicit goal of using it with QEMU. A number of differences to note from the original: * Since the board was apparently unmaintained, I have now set myself as the maintainer. * The board has been converted to use the driver model, which was the reason it was removed in the first place. * The vexpress_ca15_tc2 and vexpress_ca5x2 boards, which were removed in the same commit, are not necessary for the QEMU use case, and have been omitted. * An `mmc0` alias was introduced in the dts file. The mmc is not detected correctly without this, now that it's based on the device tree instead of the board's init function. * A couple of other nodes were removed because they were problematic when trying to run the UEFI bootmgr. Once again, the primary use case here is QEMU, and these nodes are not needed for that to work. * Unnecessary board init code has been removed, thanks to driver model and device tree. * `CONFIG_OF_EMBED` has been enabled. I know this goes against recommended practice, but there doesn't seem to be any other way to pass the dtb to U-Boot in the QEMU scenario. Using the -dtb argument does not work, I suppose because U-Boot doesn't use the same mechanics as the kernel when it's booting. * Load addresses have been changed to fit QEMU use case. People wanting to get a more detailed, yet somewhat isolated, diff between this and the original, can run this command: git diff c6c26a05b89f25a06e7562f8c2071b60fd0c9eac~1 -- \ $( git diff-tree --diff-filter=A -r --name-only HEAD~1 HEAD) (Make sure to either check out this commit first, or replace HEAD with the commit ID of this commit) Signed-off-by: Kristian Amlie <kristian.amlie@northern.tech>
2021-09-11CI: Update to latest container imagesTom Rini
- Current Ubuntu/Focal tag - QEMU 6.1.0 - genimage tool added Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-09-11azure/gitlab: Add tests for SiFive Unleashed boardBin Meng
This adds CI tests for SiFive Unleashed board. QEMU supports booting exact the same images as used on the real hardware out of the box, that U-Boot SPL loads U-Boot proper from either an SD card or the SPI NOR flash, hence we can easily set up CI to cover these 2 boot flows of SiFive Unleashed board. With this, now we can have regression testing of mmc-spi-slot and sifive spi drivers, as well as mmc and spi-nor subsystems. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2021-08-04CI: Update to LLVM-12Tom Rini
The current stable release of LLVM is 12, update to that. While at it, fix that we had not correctly upgraded to LLVM 11 previously. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-07-07Azure/GitLab: Move to gcc-11.1.0 and LLVM-11Tom Rini
- Move to gcc-11.1.0 builds from kernel.org for supported platforms and LLVM-11 for those tests. - As Heinrich has noted, the RISC-V platform specification has a profile OS-A for running rich operating systems like Linux and BSD. This profile requires 64bit and UEFI conforming to the EBBR. Only the 'embedded' profile may use 32bit. Given this, drop grub for 32bit RISC-V as it no longer compiles with gcc-11.1 and upstream is unlikely to fix it: https://www.mail-archive.com/grub-devel@gnu.org/msg30736.html - Update to grub-2.06 release to address other issues of building with gcc-11.1. - Update to newer Xtensa (gcc-9.2.0) and ARC (gcc-10.2) toolchains Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Rick Chen <rick@andestech.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-07-05Docker/CI: Update to "focal" and latest buildTom Rini
Move us up to being based on Ubuntu 20.04 "focal" and the latest tag from Ubuntu for this release. For this, we make sure that "python" is now python3 but still include python2.7 for the rx51 qemu build as that is very old and does not support python3. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-05-26GitLab: Remove tags for sandbox_noinst testsHarm Berntsen
Commit 712cc962b70d ("GitLab: Remove "tags" stanzas") removed the 'all' tag from all the jobs. The sandbox_noinst_test.py test was added in between the author date and commit date (commit 6c914e4232cd ("azure/gitlab: Add tests for sandbox_noinst")) which is probably why it still contains the tags. This commit fixes that so all jobs now don't require tags on the GitLab runners. Signed-off-by: Harm Berntsen <harm.berntsen@nedap.com> CC: Simon Glass <sjg@chromium.org> Acked-by: Pratyush Yadav <p.yadav@ti.com>
2021-05-25MIPS: remove deprecated qemu_mips boardDaniel Schwierzeck
Remove qemu_mips boards because DM migration doesn't make sense. The board support for qemu_mips is already marked as deprecated in Qemu in favour of the Malta board. Also qemu_mips support has been removed from Linux a long time ago. The official replacement is the Malta board. The same Malta U-Boot image can be used with Qemu and on physical hardware. All combinations of Big Endian and Little Endian as well as 32 bit and 64 bit are supported. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2021-04-29Azure/GitLab: Ensure we use requirements.txt for testsuitesTom Rini
Given that test/py/requirements.txt has all required test modules, make use of that rather than a manual pip install list before running our assorted tool testsuites. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-04-10arm: Remove vexpress_ca15_tc2 boardTom Rini
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-04-07Azure/GitLab: bump OpenSBI version to 0.9Heinrich Schuchardt
Version 0.9 of OpenSBI provides the system reset extension which allows us to reset and power off boards without board specific code. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2021-04-07GitLab: Remove "tags" stanzasTom Rini
Given the structure of our current GitLab tests, we don't make real use of the tags. Furthermore, these tags prevent the automatic usage of the default GitLab runners. Remove these tags. Reported-by: Roger Meier <r.meier@siemens.com> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-03-26azure/gitlab: Add tests for sandbox_noinstSimon Glass
Add this new board to the test plans. Travis-CI is left out, since it is being removed soon due to lack of capacity. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
2021-03-04Azure/GitLab: Use buildman -T0 for binman, etc, testTom Rini
There are times where buildman seems to get stuck in this job when in CI. Forcing single-threaded here allows us to complete and move on. Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-28uboot-test-hooks: Switch to our GitLab instanceTom Rini
As Stephen is no longer actively maintaining the uboot-test-hooks repository, switch to using the instance on our GitLab. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-28Correct U-Boot upstream repositoryHeinrich Schuchardt
The U-Boot source moves to https://source.denx.de/u-boot/u-boot.git effective 2021-02-28. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2021-01-27.gitlab-ci: install doc/sphinx/requirements.txtHeinrich Schuchardt
Install all requirements according to doc/sphinx/requirements.txt in the virtual environment used for testing 'make htmldocs'. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-11-05azure/gitLab/travis: Add pygit2 as a dependency for testsSimon Glass
This lets patman run all of its tests, rather than skipping quite a few. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-10-29Azure/GitLab/Travis: Add SPL unit testsSimon Glass
Run SPL unit tests in all test environments. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-09-15Azure/GitLab/Travis: Add SH4 r2dplus machine with various PCI ethernet optionsMarek Vasut
Add SH4 R2Dplus machine configured to test various U-Boot PCI ethernet options -- RTL8139, EEPRO100, AMD PCnet, DEC Tulip. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-02Azure/GitLab: Update to latest Docker containerTom Rini
- New base snapshot - Fix for high UID/GID numbers on a toolchain Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-05Azure/Travis: Update to latest Docker imageTom Rini
- New bionic snapshot - Updated sbsigntool - Include SH4 in qemu Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-24patman: Add a 'test' subcommandSimon Glass
At present we use --test to indicate that tests should be run. It is better to use a subcommand for list, like binman. Change it and adjust the existing code to fit under a 'send' subcommand, the default. Give this subcommand the same default arguments as the others. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-24Merge https://gitlab.denx.de/u-boot/custodians/u-boot-riscvTom Rini
- Fix SiFive HiFive Unleashed board booting failure problem. - Enable SiFive fu540 PWM driver. - Support SiFive fu540: SPI boot. - Update OpenSBI used for RISC-V CI testing. - Revert "riscv: Allow use of reset drivers". - Revert "Revert "riscv: sifive: fu540: Add gpio-restart support"". - sysreset: syscon: - Don't assume default value for offset and mask property. - Support value property. - qemu: Add syscon reboot and poweroff support. - Fix SIFIVE debug serial dependency. - Fix linking error when building u-boot-spl with no SMP support. - AE350 use fdtdec_get_addr_size_auto_noparent to parse smc reg. - Make memory node available to SPL in hifive-unleashed-a00-u-boot.dtsi - SiFive fu540 avoid using hardcoded ram base and size.
2020-07-24Revert "Merge tag 'dm-pull-20jul20' of git://git.denx.de/u-boot-dm"Tom Rini
This reverts commit 5d3a21df6694ebd66d5c34c9d62a26edc7456fc7, reversing changes made to 56d37f1c564107e27d873181d838571b7d7860e7. Unfortunately this is causing CI failures: https://travis-ci.org/github/trini/u-boot/jobs/711313649 Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-24azure: gitlab: travis: Update OpenSBI used for RISC-V testingBin Meng
Change to use OpenSBI release v0.8 generic platform images for QEMU RISC-V CI testing for azure, gitlab and travis-ci. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-07-20patman: Add a 'test' subcommandSimon Glass
At present we use --test to indicate that tests should be run. It is better to use a subcommand for list, like binman. Change it and adjust the existing code to fit under a 'send' subcommand, the default. Give this subcommand the same default arguments as the others. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-07-15.gitlab-ci.yml: copy GRUB to correct build pathHeinrich Schuchardt
The GRUB binaries are expected in $UBOOT_TRAVIS_BUILD_DIR. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-10CI: show skipped Python testsHeinrich Schuchardt
Call pytest3 with argument -ra to display the reason why Python tests are skipped. The -r flag displays a test summary info for each test. -ra eliminates this info for passed tests. Pros an cons were discussed in: https://lists.denx.de/pipermail/u-boot/2020-June/417090.html Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-06-29.gitlab-ci.yml: add Qemu tests for MIPS Malta boardDaniel Schwierzeck
Add Qemu tests for the MIPS Malta machine as a replacement for the deprecated generic MIPS machine. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-06-18Azure/GitLab: Move to latest Docker imageTom Rini
- Add guestfstools, efitools - Latest Ubuntu/bionic snapshot Signed-off-by: Tom Rini <trini@konsulko.com>
2020-05-19Nokia RX-51: Add automated test for running RX-51 build in qemuPali Rohár
This patch contains test/nokia_rx51_test.sh script which automatically download and compile all needed tools in local temporary directory to generate a simple MTD images for booting Maemo kernel image by U-Boot from RAM, eMMC and OneNAND. MTD images are then run in virtual n900 machine provided by qemu-linaro project. This script does not need any special privileges, so it can be run as non-root nobody user. It can be used to check that U-Boot for Nokia N900 is not broken and can be successfully booted in emulator. Script is registered to .azure-pipelines.yml, .gitlab-ci.yml and .travis.yml so it would be automatically run on those CI services. Signed-off-by: Pali Rohár <pali@kernel.org>
2020-04-27Azure/GitLab: Switch over to using LLVM-10Tom Rini
At this point LLVM-7 is rather old. Switch over to LLVM-10 to enable some amount of CI coverage with newer compilers. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-27Azure/GitLab: Update to latest Docker imageTom Rini
This provides a newer ARC toolchain along with being based on a newer Ubuntu bionic tag. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-10travis/gitlab/azure: Run cppcheck in parallelSimon Glass
This takes ages to run single-threaded. Adjust it to use all available processors. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-04-10travis/gitlab/azure: Drop repeated buildman call with test.pySimon Glass
It does not seem to be necessary to run buildman again to show errors, since any errors can be shown by the first invocation and there is only a single board being built. Update this to simplify the code, using the -e flag to make sure errors are shown. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-04-10travis/gitlab/azure: Simplify the exit code for test.pySimon Glass
It seems unnecessary to read the exit code and then check it again. Drop this and just let the test.py provide the exit code directly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-04-10travis/gitlab/azure: Enable test_handoffSimon Glass
Ensure that this SPL test runs on gitlab. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-04-10travis/gitlab/azure: Use -W to avoid warnings checkSimon Glass
We can use the -W flag to tell buildman to ignore warnings. Since we also have -E defined, compiler warnings are promoted to errors, so they will still cause a failure. But migration warnings of the form: ===================== WARNING ====================== This board does not use CONFIG_DM. CONFIG_DM will be compulsory starting with the v2020.01 release. Failure to update may result in board removal. See doc/driver-model/migration.rst for more info. will now be ignored. Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: 329f5ef51d2 (travis.yml: run buildman with option -E) Reviewed-by: Tom Rini <trini@konsulko.com>
2020-04-10travis/gitlab/azure: Use bash to avoid a_test_which_does_not_existSimon Glass
Bash allows for variables to expand only if non-empty: $ var=test $ echo ${var:+"$var"} test $ echo ${var:+"-k $var"} -k test $ var= $ echo ${var:+"-k $var"} Use this feature to avoid the workaround. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-04-10gitlab/azure: Use -w flag for all test.py buildsSimon Glass
Avoid needing to know about the internal .bm-work directory, by passing the -w flag to buildman. This is not needed on travis since the -w flag is already used (from a previous patch). Drop the -P flag since this has no effect if -w is used. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-04-10gitlab/azure: Drop unnecessary if..fi when using test.pySimon Glass
Since TEST_PY_BD is always defined we can drop this check. This does not affect travis since it has a single, unified script. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-04-10travis/gitlab/azure: Drop the buildman -d flagSimon Glass
This has no effect since -S is not given also. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-04-10travis/gitlab/azure: Drop BUILDMAN variable with test.pySimon Glass
This is not needed in the test.py part of the config, now since we use the same name as the pytests. Drop BUILDMAN, retaining it only for the 'build' parts of the config, i.e. where we build multiple boards and don't run any tests. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-04-10travis/gitlab/azure: Use --board buildman flag with test.pySimon Glass
The current method of selecting the board to build with test.py is a bit error-prone, e.g. with "^sandbox$" it actually builds 5 boards (all of those in the sandbox architecture). Use the (newish) --board flag instead, to get the same result. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-04-10gitlab/azure: Use the -w option for sandbox_splSimon Glass
Avoid needing to know about the internal .bm-work directory, by passing the -w flag to buildman. This does not affect travis since the previous commit already used the -w flag. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-04-10azure/gitlab/travis: Add RISC-V SPL testingBin Meng
This adds QEMU RISC-V 32/64 SPL testing. Unlike QEMU RISC-V 32/64, we test SPL running in M-mode and U-Boot proper running in S-mode, with a 4-core SMP configuration. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>