aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-06-12global: Use proper project name U-BootMichal Simek
Use proper project name in comments, Kconfig, readmes. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/0dbdf0432405c1c38ffca55703b6737a48219e79.1684307818.git.michal.simek@amd.com
2023-06-12board: xilinx: Add missing prototypesAlgapally Santosh Sagar
Add missing prototypes to fix the below sparse warnings 1. warning: no previous prototype for 'soc_name_decode' [-Wmissing-prototypes] 2. warning: no previous prototype for 'soc_detection' [-Wmissing-prototypes] 3. warning: no previous prototype for 'board_name_decode' [-Wmissing-prototypes] 4. warning: no previous prototype for 'board_detection' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Link: https://lore.kernel.org/r/20230523055626.14742-1-ashok.reddy.soma@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-06-12xilinx: versal-net: Add new versalnet loadpdi commandAlgapally Santosh Sagar
Versal NET loadpdi command is used for loading secure & non-secure pdi images. Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/f43709af894b669833770acb39ff5856fecf6d66.1684761656.git.michal.simek@amd.com
2023-06-12mmc: zynq: Sync with upstream DT bindingMichal Simek
Versal NET is not in production yet that's why no need to keep backward compatible with previously used compatible string. Link: https://lore.kernel.org/r/20230403102551.3763054-2-sai.krishna.potthuri@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/0d355f4fbaf6a3521d41ee43f17dde2515ff7ab7.1684311766.git.michal.simek@amd.com
2023-06-12arm64: versal-net: Add support for SPP production versionMichal Simek
Production version restarting platform version field from 0 that's why add new calculation to be able to use different DT for these platforms. Requested DT names for production silicons for IPP/SPP and EMU platform are versal-net-ipp-rev2.0.dts and versal-net-emu-rev2.0.dts. If platform version increase numbers revision can be even higher. As of today platform version is 2 that's why expected is rev2.2. Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/691e166b3cf2643d7edf482bda5500163eecb35a.1684311689.git.michal.simek@amd.com
2023-06-12cmd: sf/nand: Print and return failure when 0 length is passedAshok Reddy Soma
For sf commands, when '0' length is passed for erase, update, write or read, there might be undesired results. Ideally '0' length means nothing to do. So print 'ERROR: Invalid size 0' and return cmd failure when length '0' is passed to sf commands. Same thing applies for nand commands also. Example: ZynqMP> sf erase 0 0 ERROR: Invalid size 0 ZynqMP> sf write 10000 0 0 ERROR: Invalid size 0 ZynqMP> sf read 10000 0 0 ERROR: Invalid size 0 ZynqMP> sf update 1000 10000 0 ERROR: Invalid size 0 ZynqMP> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Link: https://lore.kernel.org/r/20230516115236.22458-1-ashok.reddy.soma@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-06-12mach-zynqmp: handoff: Add missing headerAlgapally Santosh Sagar
Add missing prototype to fix the sparse warning. warning: no previous prototype for 'bl2_plat_get_bl31_params' [-Wmissing-prototypes] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-3-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-06-12clk: zynqmp: Add fallthrough statement in the switch caseAlgapally Santosh Sagar
Add fallthrough statement in switch case to fix the sparse warning. In function 'zynqmp_clk_get_rate': warning: this statement may fall through [-Wimplicit-fallthrough=] Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com> Link: https://lore.kernel.org/r/20230519113816.22083-2-venkatesh.abbarapu@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-06-12arm64: versal-net: Detect and display bootmodeAshok Reddy Soma
Read boodmode register using versal_net_get_bootmode() in board_late_init and prepare corresponding distro boot command sequence based on it. versal_net_get_bootmode() will be changed to use smc calls later, but for now directly reads the register. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@amd.com> Link: https://lore.kernel.org/r/20230516144753.30869-1-ashok.reddy.soma@amd.com Signed-off-by: Michal Simek <michal.simek@amd.com>
2023-06-08Merge https://source.denx.de/u-boot/custodians/u-boot-usbTom Rini
2023-06-08Merge branch 'master_soc/fixes' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-sh
2023-06-08pinctrl: renesas: r8a779a0: Remove incorrect AVB[01] pinmux configurationHai Pham
AVB[01]_{MAGIC,MDC,MDIO,TXCREFCLK} are registered as both PINMUX_SINGLE(fn) and PINMUX_IPSR_GPSR(fn) in the pinmux_data array. The latter are correct, hence remove the former. Without this fix, the Ethernet PHY is not operational on the MDIO bus. Ported from Linux kernel commit a145c9a8674ac8fbfa1595276e1b6cbfc5139038 . Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com> Fixes: 741a7370fc3b8b54 ("pinctrl: renesas: Initial R8A779A0 (V3U) PFC support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/6fd217b71e83ba9a8157513ed671a1fa218b23b6.1674824958.git.geert+renesas@glider.be --- Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Hai Pham <hai.pham.ud@renesas.com> Cc: LUU HOAI <hoai.luu.ub@renesas.com> Cc: Marek Vasut <marek.vasut+renesas@mailbox.org>
2023-06-08ARM: rmobile: Identify R-Car D3 R8A77995 r1.1 SoCHai Pham
Add support to identify R8A77995 r1.1 SoC. Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> [Marek: Slight update to commit message, spell out the SoC model]
2023-06-08ARM: rmobile: Identify R-Car M3-W R8A7796 r1.1/1.2 SoCHiroyuki Yokoyama
r8a7796 cpu revision v1.2 has the same information as revision v1.1. This patch fixes revision display at startup to "rev 1.1/1.2". Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Hai Pham <hai.pham.ud@renesas.com> [Marek: Slight update to commit message, spell out the SoC model]
2023-06-08usb: musb-new: sunxi: remove unused defineSam Edwards
This is a remnant from when the USB controller driver managed the reset signal itself. A patch from the very end of 2018 changed this driver to delegate reset (and clock) management to the proper control unit driver, but left this unused define behind. Signed-off-by: Sam Edwards <CFSworks@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de>
2023-06-07Merge https://source.denx.de/u-boot/custodians/u-boot-sunxiTom Rini
A small late pull request for Allwinner. The main feature is just a DT update, matching the v6.4 Linux kernel DT files. This also enables a board (LCTech Pi F1C200s) which got its .dts file merged into Linux. Plus a tiny typo fix from Sam. Gitlab CI passed, briefly tested on an H616 board and the new LCTech Pi.
2023-06-07sunxi: Fix typo in include guardSam Edwards
Signed-off-by: Sam Edwards <CFSworks@gmail.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2023-06-07sunxi: defconfig: Add Lctech Pi F1C200s boardAndre Przywara
The Lctech Pi F1C200s (also previously known under the Cherry Pi brand) is a small development board with the Allwinner F1C200s SoC. This is the same as the F1C100s, but with 64MB instead of 32MB co-packaged DRAM. Add a defconfig for this board, enabling the most basic features. This uses the new 64MB memory map, which avoids the very tight memory map we use for the 32MB F1C100s board(s). The devicetree file is already in the tree, courtesy of the previous Linux repo sync. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2023-06-07sunxi: dts: arm/arm64: update devicetree files from Linux-v6.4-rc2Andre Przywara
Sync the devicetree files from the official Linux kernel tree, v6.4-rc2. This is covering both 64-bit and 32-bit Allwinner SoCs with Arm Ltd. cores, we skip the new RISC-V bits for now, as sunxi RISC-V support is still work in progress. Among smaller cosmetic changes, this adds a SATA regulator node which we need in U-Boot to get rid of hard-coded GPIOs. Also this updates the Allwinner F1C100s DTs, enabling USB support, and also adds the DTs for two new boards. As before, this omits the non-backwards compatible changes to the R_INTC controller, to remain compatible with older kernels. Signed-off-by: Andre Przywara <andre.przywara@arm.com>
2023-06-07phy: rockchip-inno-usb2: Implement clock operations for usb2phy clockXavier Drudis Ferran
This clock doesn't seem needed but appears in a phandle list used by ehci-generic.c to bulk enable it. The phandle list comes from linux, where it is needed for suspend/resume to work [1]. My tests give the same results with or without this patch, but Marek Vasut found it weird to declare an empty clk_ops [2]. So I adapted the code from linux 6.1-rc8 so that it hopefully works if it ever has some user. For now, without real use, it seems to at least not give any errors when called. Link: [1] https://lkml.kernel.org/lkml/1731551.Q6cHK6n5ZM@phil/T/ [2] https://patchwork.ozlabs.org/project/uboot/patch/Y5IWpjYLB4aXMy9o@localhost/ Cc: Simon Glass <sjg@chromium.org> Cc: Philipp Tomsich <philipp.tomsich@vrull.eu> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Lukasz Majewski <lukma@denx.de> Cc: Sean Anderson <seanga2@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Christoph Fritz <chf.fritz@googlemail.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Xavier Drudis Ferran <xdrudis@tinet.cat> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # rk3399, rk3328, rv1126
2023-06-07phy: rockchip-inno-usb2: Add usb2phy clock provider of 480MHz clockXavier Drudis Ferran
arch/arm/dts/rk3399.dtsi has a node usb_host0_ehci: usb@fe380000 { compatible = "generic-ehci"; with clocks: clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>, <&u2phy0>; The first 2 refer to nodes with class UCLASS_CLK, but &u2phy0 has class UCLASS_PHY. u2phy0: usb2phy@e450 { compatible = "rockchip,rk3399-usb2phy"; Since clk_get_bulk() only looks for devices with UCLASS_CLK, it fails with -ENODEV and then ehci_usb_probe() aborts. The consequence is peripherals connected to a USB 2 port (e.g. in a Rock Pi 4 the white port, nearer the edge) not being detected. They're detected if CONFIG_USB_OHCI_GENERIC is selected in Kconfig, because ohci_usb_probe() does not abort when one clk_get_by_index() fails, but then they work in USB 1 mode. rk3399.dtsi comes from linux and the u2phy0 was added[1] to the clock list in: commit b5d1c57299734f5b54035ef2e61706b83041f20c Author: William wu <wulf@rock-chips.com> Date: Wed Dec 21 18:41:05 2016 +0800 arm64: dts: rockchip: add u2phy clock for ehci and ohci of rk3399 We found that the suspend process was blocked when it run into ehci/ohci module due to clk-480m of usb2-phy was disabled. [...] Suspend concerns don't apply to U-Boot, and the problem with U-Boot failing to probe EHCI doesn't apply to linux, because in linux rockchip_usb2phy_clk480m_register makes u2phy0 a proper clock provider when called by rockchip_usb2phy_probe(). So I can think of a few alternative solutions: 1- Change ehci_usb_probe() to make it more similar to ohci_usb_probe(), and survive failure to get one clock. Looks a little harder, and I don't know whether it could break something if it ignored a clock that was important for something else than suspend. 2- Change rk3399.dtsi effectively reverting the linux commit b5d1c57299734f5b54035ef2e61706b83041f20c. This dealigns the .dtsi from linux and seems fragile at the next synchronisation. 3- Change the clock list in rk3399-u-boot.dtsi or somewhere else. This survives .dts* sync but may survive "too much" and miss some change from linux that we might want. 4- Enable CONFIG_USB_OHCI_GENERIC and use the ports in USB 1 mode. This would need to be made for all boards using rk3399. In a simple test reading one file from USB storage it gave 769.5 KiB/s instead of 20.5 MiB/s with solution 2. 5- Trying to replicate linux and have usb2phy somehow provide a clk, or have a separate clock device for usb2phy in addition to the phy device. This patch tries to implement option 5 as Marek Vasut requested in December 5th. Options 1 and 3 didn't get through [2][3]. It just registers usb2phy as a clock driver (device_bind_driver() didn't work but device_bind_driver_to_node() did), without any specific operations, so that ehci-generic.c finds it and is happy. It worked in my tests on a Rock Pi 4 B+ (rk3399). Link: [1] https://lkml.kernel.org/lkml/1731551.Q6cHK6n5ZM@phil/T/ [2] https://patchwork.ozlabs.org/project/uboot/patch/20220701185959.GC1700@begut/ [3] https://patchwork.ozlabs.org/project/uboot/patch/Y44+ayJfUlI08ptM@localhost/ Cc: Simon Glass <sjg@chromium.org> Cc: Philipp Tomsich <philipp.tomsich@vrull.eu> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Lukasz Majewski <lukma@denx.de> Cc: Sean Anderson <seanga2@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Christoph Fritz <chf.fritz@googlemail.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Xavier Drudis Ferran <xdrudis@tinet.cat> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com> # rk3399, rk3328, rv1126
2023-06-07usb: musb-new: sunxi: fix error checkSam Edwards
The `musb_register` function returns some ERR_PTR(...) on failure, not NULL, so update the check here appropriately. Signed-off-by: Sam Edwards <CFSworks@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de>
2023-06-07Merge tag 'u-boot-amlogic-20230607' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-amlogic - meson_uart empty logic fix
2023-06-07serial: meson: fix meson_serial_pending() tx logicMattijs Korpershoek
According to the dm_serial_ops documentation, pending() should: > @return number of waiting characters, 0 for none, -ve on error And: > It is acceptable to return 1 if an indeterminant number > of characters is waiting. With the current implementation, we have: * FIFO is full -> pending() returns 0 * FIFO is partially used -> pending() returns 1 * FIFO is empty -> pending() returns 1 This is not the same as what the documentation requires. Moreover, since [1], arm reset now flushes all console devices (including serial) before the cpu gets reset. Because of the flawed logic: => reset # user calls reset flush() is called _serial_flush() is called ops->pending(dev, false) # never returns false # board hangs indefinitely without resetting. Fix it by using AML_UART_TX_EMPTY instead of AML_UART_TX_FULL. [1] commit c5f4cdb8eb60 ("console: Use flush() before panic and reset"), Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230606-fix-meson-serial-pending-v1-1-6a54d4a01f76@baylibre.com Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2023-06-06Merge tag 'ubifixes-for-v2023-07-rc4' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-ubi ubifs changes for v2023.07-rc4 UBIFS fixes from Ben Dooks - ubifs: allow loading to above 4GiB
2023-06-06Merge tag 'for-v2023-07-rc4' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-i2c i2c updates for v2023-07-rc4 Bugfixes: - rockchip: De-initialize the bus after start bit failure from Ondrej Jirman - cdns: Fix broken retry mechanism on arbitration lost
2023-06-06ubifs: allow loading to above 4GiBBen Dooks
The ubifsload command is truncating any address above 4GiB as it casts this address to an u32, instead of using an unsigned long which most of the other load commands do. Change this to an unsigned long to allow loading into high memory for boards which use these areas. Fixes the following error: => ubifsload 0x2100000000 /boot/Image.lzma Loading file '/boot/Image.lzma' to addr 0x00000000... Unhandled exception: Store/AMO access fault Signed-off-by: Ben Dooks <ben.dooks@sifive.com> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
2023-06-05I2C: cdns: Fix broken retry mechanism on arbitration lost.Andrea Merello
In the current implementation, in case of I2C arbitration lost, a retry is attempted; the message counter and pointer are reset to the original values and the I2C xfer process is restart from the beginning. However the message counter and message pointer are respectively decremented and incremented by one before attempting any transfer, causing the 1st transfer not to be actually retried (in case of a single transfer, nothing is actually retried at all). This patch fixes this: in case of retry, the 1st transfer is also retried. Tested on a ZynqMP Kria board, with upstream older u-boot, but the involved file and underlying logic seem basically the same. Signed-off-by: Andrea Merello <andrea.merello@iit.it>
2023-06-05i2c: rockchip: De-initialize the bus after start bit failureOndrej Jirman
Failure can happen when i2c is used without initializing pinctrl properly, which U-Boot happily allows in SPL. Without this fix, further I2C access would fail, even after proper pinctrl initialization. Signed-off-by: Ondrej Jirman <megi@xff.cz> Cc: Heiko Schocher <hs@denx.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Heiko Schocher <hs@denx.de>
2023-06-02Merge tag 'efi-2023-07-rc4' of ↵Tom Rini
https://source.denx.de/u-boot/custodians/u-boot-efi Pull request efi-2023-07-rc4 Documentation: * man pages for loadb, loadx UEFI: * check return value of part_get_info() * improve unit test for RegisterProtocolNotify()
2023-06-02efi_selftest: LocateHandleBuffer return codeHeinrich Schuchardt
Check that LocateHandleBuffer() return EFI_NOT_FOUND when called with ByRegisterNotify and all handles already have been retrieved. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2023-06-02efi_loader: check return value of part_get_info()Heinrich Schuchardt
part_get_info() may return an error code. Check it. Update function description of dp_part_node(). Addresses-Coverity-ID: 184067 ("Unchecked return value") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-06-02doc: android: Fix a typoBin Meng
%s/than/then Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-06-02doc: fix loady man-pageHeinrich Schuchardt
* loady may return $? = 1. * Move misplaced description Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-06-02doc: loadx man-pageHeinrich Schuchardt
Provide a man-page for the loadx command. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-06-02doc: loadb man-pageHeinrich Schuchardt
Provide a man-page for the loadb command. Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
2023-05-30Merge branch '2023-05-30-TI-fixes-Apple-M2-support'Tom Rini
- Fixes for some TI K3 platforms and merge the Apple M2 support I had intended to pick up earlier.
2023-05-30pci: apple: Add support for M2 Pro/MaxMark Kettenis
The PCIe controller on the M2 Pro/Max is different from the one found on earlier Apple SoCs. Some registers moved and te meaning of the bits in some other registers changed. But they are still similar enough to handle both controllers in the same driver. Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2023-05-30arm: apple: Add initial Apple M2 Pro/Max supportMark Kettenis
Apple's M2 Pro/Max SoC are somewhat similar to the M1 Pro/Max but need a tweaked memory map. USB, NVMe, UART and WDT are working with the existing drivers. Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
2023-05-30arm: mach-k3: security: separate out validating binary logicManorit Chawdhry
K3 GP devices allows booting the secure binaries on them by bypassing the x509 header on them. ATF and OPTEE firewalling required the rproc_load to be called before authentication. This change caused the failure for GP devices that strips off the headers. The boot vector had been set before the headers were stripped off causing the runtime stripping to fail and stripping becoming in-effective. Separate out the secure binary check on GP/HS devices so that the boot_vector could be stripped before calling rproc_load. This allows keeping the authentication later when the cluster is on along with allowing the stripping of the binaries in case of gp devices. Fixes: 1e00e9be62e5 ("arm: mach-k3: common: re-locate authentication for atf/optee") Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-05-30arm: mach-k3: Increase SYSFW max image sizeDave Gerlach
When booting with HS silicon, the system firmware image is 278270, which is slightly larger than currently allocated amount. This can cause unexpected behavior if this overlap interferes with other things in memory, so increase this with a slightly margin added as well to avoid any boot issues that can appear after system firmware gets loaded. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tero Kristo <kristo@kernel.org> Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> Reviewed-by: Dhruva Gole <d-gole@ti.com>
2023-05-30Kconfig: j721e: Change K3_MCU_SCRATCHPAD_BASE to non firewalled regionManorit Chawdhry
In non-combined boot flow for K3, all the firewalls are locked by default until sysfw comes up. Rom configures some of the firewall for its usage along with the SRAM for R5 but the PSRAM region is still locked. The K3 MCU Scratchpad for j721e was set to a PSRAM region triggering the firewall exception before sysfw came up. The exception started happening after adding multi dtb support that accesses the scratchpad for reading EEPROM contents. The commit changes R5 MCU scratchpad for j721e to an SRAM region. Old Map: ┌─────────────────────────────────────┐ 0x41c00000 │ SPL │ ├─────────────────────────────────────┤ 0x41c40000 (approx) │ STACK │ ├─────────────────────────────────────┤ 0x41c85b20 │ Global data │ │ sizeof(struct global_data) = 0xd8 │ ├─────────────────────────────────────┤ gd->malloc_base = 0x41c85bfc │ HEAP │ │ CONFIG_SYS_MALLOC_F_LEN = 0x70000 │ ├─────────────────────────────────────┤ CONFIG_SPL_BSS_START_ADDR │ SPL BSS │ (0x41cf5bfc) │ CONFIG_SPL_BSS_MAX_SIZE = 0xA000 │ └─────────────────────────────────────┘ CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX                 (0x41cffbfc) New Map: ┌─────────────────────────────────────┐ 0x41c00000 │ SPL │ ├─────────────────────────────────────┤ 0x41c40000 (approx) │ EMPTY │ ├─────────────────────────────────────┤ 0x41c81920 │ STACK │ │ SPL_SIZE_LIMIT_PROVIDE_STACK=0x4000 │ ├─────────────────────────────────────┤ 0x41c85920 │ Global data │ │ sizeof(struct global_data) = 0xd8 │ ├─────────────────────────────────────┤ gd->malloc_base = 0x41c859f0 │ HEAP │ │ CONFIG_SYS_MALLOC_F_LEN = 0x70000 │ ├─────────────────────────────────────┤ CONFIG_SPL_BSS_START_ADDR │ SPL BSS │ (0x41cf59f0) │ CONFIG_SPL_BSS_MAX_SIZE = 0xA000 │ ├─────────────────────────────────────┤ 0x41cff9fc │ NEW MCU SCRATCHPAD │ │ SYS_K3_MCU_SCRATCHPAD_SIZE = 0x200 │ └─────────────────────────────────────┘ CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX                 (0x41cffbfc) Fixes: ab977c8b91b4 ("configs: j721s2_evm_r5: Enable support for building multiple dtbs into FIT") Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com> [n-francis@ti.com: SRAM allocation addressing diagram] Signed-off-by: Neha Francis <n-francis@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Kamlesh Gurudasani <kamlesh@ti.com>
2023-05-30configs: j721e: Merge the HS and non-HS defconfigsManorit Chawdhry
K3 devices have runtime type board detection. Make the default defconfig include the secure configuration. Then remove the HS specific config. Non-HS devices will continue to boot due to runtime device type detection. If TI_SECURE_DEV_PKG is not set the build will emit warnings, for non-HS devices these can be ignored. Reviewed-by: Bryan Brattlof <bb@ti.com> Reviewed-by: Neha Malcom Francis <n-francis@ti.com> Acked-by: Andrew Davis <afd@ti.com> Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-05-30arm: k3: config.mk: Add missing dependencies on tispl.bin HSAndrew Davis
When building for secure devices using non-buildman based image generation the signed tispl.bin file is called tispl.bin_HS. Also build the unsigned tispl.bin file as expected. Signed-off-by: Andrew Davis <afd@ti.com> Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
2023-05-29Prepare v2023.07-rc3Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-29configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2023-05-25Merge tag 'u-boot-imx-20230525' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20230525 ------------------- - i.MX93 series - Fixes CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/16412
2023-05-21serial: mxs: Add MXS AUART driverMarek Vasut
Add trivial driver for the MXS AUART IP. This is the other UART IP present in i.MX23 and i.MX28, used to drive the non-DUART ports. Signed-off-by: Marek Vasut <marex@denx.de>
2023-05-21imx9: imx93_evk: enable sysresetPeng Fan
Enable sysreset for i.MX93 EVK. Signed-off-by: Peng Fan <peng.fan@nxp.com>
2023-05-21imx9: imx93_evk: update ddr timing filePeng Fan
Update DDR timing file generated by DDR Config Tool 1. Dynamic refresh rate is set by default 2. The 3rd freq will be 625MTS based on power and performance better than 100MTS. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 23:34:56 +0000