aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-10-22test: overlay: add missing includeHeinrich Schuchardt
Compiling the overlay unit test fails with odroid-c2_defconfig showing errors like: test/overlay/cmd_ut_overlay.c:29:8: error: unknown type name ‘fdt32_t’ Add the missing include. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-10-22nand: atmel: Initialize pmecc smu with correct sizeBin Meng
Currently in pmecc_get_sigma(), the code tries to clear the memory pointed by smu with wrong size 'sizeof(int16_t) * ARRAY_SIZE(smu)'. Since smu is actually a pointer, not an array, so ARRAY_SIZE(smu) does not generate correct size to be cleared. In fact, GCC 8.1.0 reports a warning against it: error: division 'sizeof (int16_t * {aka short int *}) / sizeof (int16_t {aka short int})' does not compute the number of array elements [-Werror=sizeof-pointer-div] Fix it by using the correct size. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-22configs: sama5d2_ptc_ek: add default bootargs for MMC defconfigEugen Hristev
Add default bootargs for the MMC defconfig to use SD-Card as rootfs Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-10-22configs: sama5d2_ptc_ek: add default bootargs for NAND defconfigEugen Hristev
Add the default kernel bootargs according to our NAND flash demo layout: http://www.at91.com/linux4sam/bin/view/Linux4SAM/Sama5d2PtcEKMainPage#NAND_Flash_demo_Memory_map Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-10-22configs: sama5d2_xplained: enable w1 and overlay for emmc defconfigEugen Hristev
Enable onewire support and commands, fdt overlay for the emmc defconfig. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-10-22configs: sama5d27_som1_ek: enable w1 and overlay for mmc1 defconfigEugen Hristev
Enable onewire support and commands, fdt overlay for the mmc1 defconfig. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-10-22configs: at91: sama5: enable CMD_IMIEugen Hristev
Enable iminfo command with CONFIG_CMD_IMI Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-10-22configs: at91: sam9x5: added FIT and iminfo supportEugen Hristev
Enabled FIT image support and iminfo command for FIT information. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-10-22board: at91sam9x5: add environment var for cpu typeEugen Hristev
When booting and CPU is detected from cpuid, we also need an environment variable that will be used in boot commands to load the proper devicetree. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
2018-10-22ARM: omap3logic: Fix MMC nameAdam Ford
In my haste to migrate SPL to DM, I copied the wrong name. While it really doesn't matter, I'd prefer the name to match the board, so am335x_mmc0 is now called omap3_logic_mmc0 Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-22ARM: omap3logic: Specify DM serial driver as omap_serialAdam Ford
With the new omap_serial driver, this patch uses this instead from the former ns16550_serial driver. Even though the omap_serial driver is essentially the same. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-22ARM: omap3logic: Encapsulate the MUSB functions in check for DMAdam Ford
With the DM_USB working for USB host features, encapsulate the USB gadget initialization in a precomiler check. If DM is enabled, we don't need to manually initialize the MUSB driver. Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-22ARM: omap3_logic.c: Optimize DDR timings based on OMAP35 or 36/37Adam Ford
The default timings are assumming an OMAP36 / AM37 / DM37, but the OMAP35 controller is a bit slower, so DDR may operate out of spec when under stress. This patch checks the processor type and sets the DDR timings according to processor type. Fixes: 5ad4212ce0d5 ("ARM: DTS: Add Logic PD OMAP35/DM37 SOM-LV and OMAP35 Torpedo") Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-22ARM: da850evm_direct_nor: Remove DM_I2C_COMPATAdam Ford
The da850evm does not need this enabled, so this removes a notice that appears during compile time that says "Please remove" Signed-off-by: Adam Ford <aford173@gmail.com>
2018-10-20test: Add test for PCI device without compat string and with DT nodeMarek Vasut
Add test which checks if a PCI device described in DT with an entry and reg = <...> property, but without compatible string results in a valid U-Boot PCI udevice with the udevice.node populated with reference to this DT node. Also check if the other PCI device without a DT node does not contain any bogus udevice.node. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-20test: Add PCI device entry without compat string and with DT nodeMarek Vasut
Add PCI entry without compatible string and with a DT node only with reg = <...> property into the DT. This is needed for the tests to verify whether such a setup creates an U-Boot PCI device with the DT node associated with it in udevice.node. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-20pci: Update documentation to make 'compatible' string optionalMarek Vasut
Reword the documentation to make it clear the compatible string is now optional, yet still matching on it takes precedence over PCI IDs and PCI classes. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-20pci: Support parsing PCI controller DT subnodesMarek Vasut
The PCI controller can have DT subnodes describing extra properties of particular PCI devices, ie. a PHY attached to an EHCI controller on a PCI bus. This patch parses those DT subnodes and assigns a node to the PCI device instance, so that the driver can extract details from that node and ie. configure the PHY using the PHY subsystem. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@konsulko.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-19common: command: fix typoHeinrich Schuchardt
%s/CMD_RET_SUCCESX/CMD_RET_SUCCESS/g Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2018-10-19Convert CONFIG_FLASH_CFI_DRIVER et al to KconfigAdam Ford
This converts the following to Kconfig: CONFIG_FLASH_CFI_DRIVER CONFIG_SYS_FLASH_USE_BUFFER_WRITE CONFIG_FLASH_CFI_MTD CONFIG_SYS_FLASH_PROTECTION CONFIG_SYS_FLASH_CFI Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Re-migrate] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-19travis: Add sandbox/clang-7 supportTom Rini
To make testing with clang support easier, add sandbox/clang-7 combination to our testing matrix. To facilitate this, switch to using the "sources" method that the travis.yml file supports to list additional repositories and add the official one for llvm-7. Due to buildman not supporting using clang at this time add logic to manually build a single sandbox configuration in the expected output directory so that we can still invoke all of our tests. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2018-10-19bootcount: Make bootcount magic configurableMarek Vasut
Add new Kconfig option, SYS_BOOTCOUNT_MAGIC, to select the boot counter magic word. This can be useful ie. in case the entire boot counter register is not usable. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com>
2018-10-19travis: Switch to i386 version toolchain for x86Bin Meng
Currently this uses x86_64 version toolchain for x86 build in travis-ci. Change it to i386 version to avoid updating the buildman toolchain path every time when the toolchain version number is changed, eg: from 7.3.0 to 8.1.0. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-19travis: Remove or32 toolchain infoBin Meng
or32 is not supported by U-Boot anymore. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2018-10-19ARM: mach-omap2: Kconfig: Make SYS_MPUCLK dependent on AM33XXAdam Ford
This value is unly used in arch/arm/mach-omap2/am33xx/ clock_am33xx.c, so let's make it dependent on AM33XX since that is the only way this file gets compiled into the code according to the Makefile. Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Fix symbol name] Signed-off-by: Tom Rini <trini@konsulko.com>
2018-10-19arm: lpc32xx: remove phantom CONFIG_LPC32XX_SDRAM_ config optionVladimir Zapolskiy
The option has never existed and config whitelist script accumulates it from a comment block, wipe it out from the source code. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2018-10-19work_92105: remove unused CONFIG_SPL_NAND_BOOT configuration optionVladimir Zapolskiy
The option is unused, SPL image gets a wanted boot device by standard spl_boot_device() call. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2018-10-19work_92105: remove unused CONFIG_LPC32XX_SPL configuration optionVladimir Zapolskiy
The CONFIG_LPC32XX_SPL option from board include file has never been used, it is safe to remove it. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2018-10-19Makefile: add LPC32xx precondition for building platform imagesVladimir Zapolskiy
To prevent accidental build failures the change converts a number of NXP LPC32xx specific image targets to be conditionally dependent on target build configuration. The wrapped image targets always contain a U-Boot SPL binary and the images are supposed to be directly flashed on a NAND flash device for read access by LPC32xx NAND MLC controller. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2018-10-19arm: lpc32xx: add CONFIG_ARCH_LPC32XX build optionVladimir Zapolskiy
The explicit arch specific build symbol allows to group supported boards, generalize common config options and it will serve as a dependency for platform only drivers. Two related board defconfigs are resynced after the change. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
2018-10-19Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini
2018-10-18ARM: rmobile: Drop PRR syscon driverMarek Vasut
The PRR syscon driver is available too late for Multi DTB build of U-Boot. Replace it with simple check whether a platform is Gen3 or not and produce an address of the PRR. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-10-18ARM: dts: rmobile: Build -u-boot variants of DTsMarek Vasut
Build the -u-boot variants of the device trees so they can be included in Multi-DTB fitImage, which in turn allows us to build single U-Boot image for multiple boards. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-10-18ARM: dts: rmobile: r8a77990: Add USB2.0(EHCI) DT nodes on EbisuHiroyuki Yokoyama
Add device tree nodes for USB2.0(EHCI) on R-Car E3 Ebisu board. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-18ARM: rmobile: Fix module clock controls refer status on Gen3Hiroyuki Yokoyama
When referring to the MSTPSR register, it contains the clock status of SYS, RT, SECURE, and controlling SMSTPCR using this value has the problem of being affected by the RT and SECURE status.This patch changes the reference register to SMSTPCR. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-18ARM: rmobile: Enable cache command on Gen3Hiroyuki Yokoyama
This patch enables the cache command, mostly for convenience of testing. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
2018-10-18ARM: rmobile: Tidy up SYSC_PWRx define of 3DG on Gen3Hiroyuki Yokoyama
Tidy up unused definition related to power control of 3DG. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-18ARM: rmobile: salvator-x: Remove GSX clock force supplyHiroyuki Yokoyama
GSX clock force supply code is unnecessary at U-Boot, because GSX clock control is supported at the kernel driver. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-18ARM: rmobile: Remove Watchdog and CPG settings on Gen3Hiroyuki Yokoyama
This code is unnecessary, because these registers are set by the initial program loader (IPL). Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-18ARM: rmobile: Remove TMU0/TMU1 settings on Gen3Hiroyuki Yokoyama
U-Boot uses ARM generic timer, TMU0 and TMU1 are not used, remove them. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-18ARM: rmobile: Remove console parameter from bootargs on Gen3Hiroyuki Yokoyama
This patch removes 'console=' argument, because kernel uses stdout-path as parameter. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-18ARM: rmobile: Fix CPGWPR Address define and Settings on Gen3Hiroyuki Yokoyama
This patch fixes the write-protect control of CPG. Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
2018-10-17Merge tag 'signed-efi-2018.11' of git://github.com/agraf/u-bootTom Rini
Patch queue for efi - 2018-10-17 A few bug fixes for the 2018.11 release: - Fix block seeking on 32bit - Fix execution with DEBUG set - Fix a few Coverity found bugs - Fix warnings Heinrich Schuchardt (13): efi_loader: fix relocation on x86_64 efi_loader: correct signature of GetPosition, SetPosition efi_loader: execute efi_save_gd() first efi_loader: efi_allocate_pool(EFI_ALLOCATE_ANY_PAGES, ...) efi_loader: error handling in read_console() efi_loader: return type efi_console_register() efi_loader: superfluous statement in is_dir() efi_loader: memory leak in efi_set_variable() efi_loader: remove lcd.h from efi_net.c arm: do not include efi_loader.h twice efi_loader: fix typo in efi_boottime.c efi_selftest: creating new handle in controller test efi_loader: efi_dp_get_next_instance() superfluous statement Tom Rini (2): efi_loader: Fix warning in efi_load_image() fs: fat: Fix warning in normalize_longname()
2018-10-16efi_loader: efi_dp_get_next_instance() superfluous statementHeinrich Schuchardt
Remove a superfluous statement in efi_dp_get_next_instance(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16efi_selftest: creating new handle in controller testHeinrich Schuchardt
When the last protocol interface is uninstalled the handle is deleted but this does not set the value of the handle to NULL. To create a new handle with OpenProtocolInterface the value of the handle must be NULL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2018-10-16Merge git://git.denx.de/u-boot-microblazeTom Rini
Xilinx changes for v2018.11-rc2-v2 FPGA: - Fix SPL fpga loading from FIT ARM64: - Fix gic accesses in EL2/EL1 Xilinx: - Add dlc20 board support - Add Versal board support - Sync defconfigs - Enable MP via Kconfig - Add missing efuse node - Enable CDC for zcu100 cmd: - Fix kgdb Kconfig dependency
2018-10-16cmd: kgdb: Enable kgdb only for PPCMichal Simek
Only PPC supports this option that's why there should be proper dependency setup via Kconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm64: zynqmp: Enable MP by default via KconfigMichal Simek
Simplify defconfig for ZynqMP but keep option not to enable it for mini targets. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm64: zynqmp: Add new command for TCM initializationSiva Durga Prasad Paladugu
This patch adds new zynqmp command "zynqmp tcminit mode" to initialize TCM. TCM needs to be initialized before accessing to avoid ECC errors. This new command helps to perform the same. It also makes tcm_init() as global and uses it for doing the TCM initialization. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2018-10-16arm64: zynqmp: Move TCM initialization to a separate routineSiva Durga Prasad Paladugu
This patch moves TCM initialization to a separate routine to make it modular and can be reused if required. It also prints warning message now as it writes to TCM. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 02:52:46 +0000