aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in ft_board_setupPatrick Delaunay
Use IS_ENABLED to prevent ifdef in ft_board_setup. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in env functionsPatrick Delaunay
Use IS_ENABLED to prevent ifdef in env functions: - env_get_location - env_ext4_get_intf - mmc_get_env_dev Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in board_late_initPatrick Delaunay
Use IS_ENABLED to prevent ifdef in board_late_init. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in dk2_i2c1_fixPatrick Delaunay
Use IS_ENABLED to prevent ifdef in dk2_i2c1_fix. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in set_dfu_alt_infPatrick Delaunay
Use CONFIG_IS_ENABLED to prevent ifdef in set_dfu_alt_inf. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in sysconf_initPatrick Delaunay
Use IS_ENABLED to prevent ifdef in sysconf_init. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in board_check_usb_powerPatrick Delaunay
Use IS_ENABLED to prevent ifdef in board_check_usb_power. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in ↵Patrick Delaunay
g_dnl_board_usb_cable_connected Use IS_ENABLED to prevent ifdef in g_dnl_board_usb_cable_connected and in g_dnl_bind_fixup Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13board: stm32mp1: use IS_ENABLED to prevent ifdef in board_key_checkPatrick Delaunay
Use IS_ENABLED to prevent ifdef in board_key_check Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
2020-08-13usb: host: dwc3-sti-glue: Fix ofnode_valid() parameterPatrice Chotard
node varaible is used as iterator into ofnode_for_each_subnode() loop, when exiting of it, node is no more a valid ofnode. Use dwc3_node instead as parameter of ofnode_valid() Fixes: ac28e59a574d ("usb: Migrate to support live DT for some driver") Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Cc: Kever Yang <kever.yang@rock-chips.com>
2020-08-10configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-10test/py: fix SquashFS testsJoao Marcos Costa
Use "cons.config.build_dir" instead of writing to the source directory (read-only). This will fix the test failures in Azure. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-08-08Convert CONFIG_SYS_MMC_ENV_DEV et al to KconfigTom Rini
This converts the following to Kconfig: CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Note that with this conversion we now have consistent behavior with respect to ensuring that we have always selected the correct MMC device and hardware partition. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-08Makefile: sunxi: Don't use binman to build ATF imageSimon Glass
At present with sunxi 64-bit, the Makefile builds u-boot-sunxi-with-spl.bin and then binman overwrites it with its own version. But the binman definition lacks some parts, in particular BL31. For now, work around this with a hack. Tested-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Simon Glass <sjg@chromium.org> Fixes: 42b18df80fd ("x86: Makefile: Drop explicit targets built by binman")
2020-08-08test/py: serial# cannot be overwritten on some devicesHeinrich Schuchardt
On some devices the environment variable serial# cannot be overwritten. Set the variable only if it is not set. For our unit test it is sufficient to test if any value for serial-number is set. Fixes: 8a5cdf601f8d ("test: efi_selftest: Do not force serial# setting") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-08-08Merge branch '2020-08-07-misc-improvements'Tom Rini
- SquashFS support - Assorted bugfixes
2020-08-07test: py: test_shell_run() with CONFIG_HUSH_PARSER=nHeinrich Schuchardt
The hush parser not enabled for some boards, e.g. sipeed_maix_bitm_defconfig. With CONFIG_HUSH_PARSER=n a double quotation mark is not interpreted as the beginning of a string. Use a single quotation mark instead. Furthermore without the hush parser variables have to be referenced as ${varname}. Add the missing braces. Reported-by: Sean Anderson <seanga2@gmail.com> Fixes: 8b86c609b860 ("test/py: add test of basic shell functionality") Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-08-07tests: support mkfs.ext4 without metadata_csumStephen Warren
Modify various test/py filesystem creation routines to support systems that don't implement the metadata_csum ext4 feature. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2020-08-07board: presidio: add LED supportJway Lin
Add LED support for Cortina Access Presidio Engineering Board Signed-off-by: Jway Lin <jway.lin@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> Reviewed-by: Simon Glass <sjg@chromium.org> CC: Simon Glass <sjg@chromium.org>
2020-08-07led: led_cortina: Add CAxxx LED supportJway Lin
Add Cortina Access LED controller support for CAxxxx SOCs Signed-off-by: Jway Lin <jway.lin@cortina-access.com> Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Simon Glass <sjg@chromium.org> Add head file fixed link error and remove unused flashing function Reviewed-by: Simon Glass <sjg@chromium.org>
2020-08-07Travis: Add squashfs-toolsTom Rini
So that the tests we now have for squashfs can run, add squashfs-tools for mksquashfs. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-07test/py: Add tests for the SquashFS commandsJoao Marcos Costa
Add Python scripts to test 'ls' and 'load' commands. The scripts generate a SquashFS image and clean the directory after the assertions, or if an exception is raised. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-08-07fs/fs.c: add symbolic link case to fs_ls_generic()Joao Marcos Costa
Adds an 'else if' statement inside the loop to check for symbolic links. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-08-07fs/squashfs: add support for zlib decompressionJoao Marcos Costa
Add call to zlib's 'uncompress' function. Add function to display the right error message depending on the decompression's return value. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-08-07include/u-boot, lib/zlib: add sources for zlib decompressionJoao Marcos Costa
Add zlib (v1.2.11) uncompr() function to U-Boot. SquashFS depends on this function to decompress data from a raw disk image. The actual support for zlib into SquashFS sources will be added in a follow-up commit. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-08-07fs/squashfs: add filesystem commandsJoao Marcos Costa
Add 'ls' and 'load' commands. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-08-07fs/squashfs: new filesystemJoao Marcos Costa
Add support for SquashFS filesystem. Right now, it does not support compression but support for zlib will be added in a follow-up commit. Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
2020-08-07cmd: Update the memory-search commandSimon Glass
Add various fixes and improvements to this command that were missed in the original version. Unfortunately I forgot to send v2. - Fix Kconfig name - Use a separate variable for the remaining search length - Correct a minor bug - Move into a separate test suite - Add -q flag to the 'quiet' test to test operation when console is enabled - Enable the feature for sandbox Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-07test: Add a flag for tests that need console recordingSimon Glass
Allow tests that need console recording to be marked, so they can be skipped if it is not available. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-07dm: Rename DM test flags to make them more genericSimon Glass
The test flags used by driver model are currently not available to other tests. Rather than creating two sets of flags, make these flags generic by changing the DM_ prefix to UT_ and moving them to the test.h header. This will allow adding other test flags without confusion. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-07console: Always define the console-recording functionsSimon Glass
On boards without console recording these function are currently missing. It is more convenient for them to be present but to return dummy values. That way if we know that a test needs recording, we can check if it is available, and skip the test if not, while avoiding #ifdefs. Update the header file according and adjust console_record_reset_enable() to return an error if recording is not available. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-07test: Add a way to check part of a console line or skip itSimon Glass
Some lines of the output are not worth testing, or not worth testing in their entirety. For example, when checking a hex dump we know that the hex-dump routine can display ASCII so we only need to check the hex bytes, not the ASCII dump. Add a new test macros which can check only part of a console line. Sometimes it is useful to skip a line altogether, so add a macro for that also. Signed-off-by: Simon Glass <sjg@chromium.org>
2020-08-07Merge branch '2020-08-07-mkimage-improvements'Tom Rini
- Assorted mkimage improvements related to FIT images and verified boot
2020-08-07mkimage: fit: fix import of external dataPatrick Oppenlander
The external data is located after the mmapped FDT pointed to by 'old_fdt', not in the newly created FDT we are importing into at 'fdt'. Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com>
2020-08-07mkimage: fit: include image cipher in configuration signaturePatrick Oppenlander
This patch addresses issue #2 for signed configurations. -----8<----- Including the image cipher properties in the configuration signature prevents an attacker from modifying cipher, key or iv properties. Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-08-07mkimage: fit: don't cipher ciphered dataPatrick Oppenlander
Previously, mkimage -F could be run multiple times causing already ciphered image data to be ciphered again. Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-08-07mkimage: fit: handle FDT_ERR_NOSPACE when cipheringPatrick Oppenlander
Also replace fdt_delprop/fdt_setprop with fdt_setprop as fdt_setprop can replace an existing property value. Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-08-07mkimage: fit: only process one cipher nodePatrick Oppenlander
Previously mkimage would process any node matching the regex cipher.* and apply the ciphers to the image data in the order they appeared in the FDT. This meant that data could be inadvertently ciphered multiple times. Switch to processing a single cipher node which exactly matches FIT_CIPHER_NODENAME. Signed-off-by: Patrick Oppenlander <patrick.oppenlander@gmail.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
2020-08-06Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usbTom Rini
- XHCI updates to support MIPS better
2020-08-06Merge branch '2020-08-06-Kconfig-sram-options'Tom Rini
- Migrate a few SRAM related options to Kconfig, related cleanups.
2020-08-06common/board_r: Move blkcache_init call earlier in the boot sequenceOvidiu Panait
blkcache_init manually relocates blkcache list pointers when CONFIG_NEEDS_MANUAL_RELOC is enabled. However, it is called very late in the boot sequence, which could be a problem if previous boot calls execute blkcache operations with the non-relocated pointers. For example, mmc is initialized earlier and might call blkcache_invalidate (in mmc_select_hwpart()) when trying to load the environment from mmc via env_load(). To fix this issue, move blkcache_init boot call earlier, before mmc gets initialized. Acked-by: Angelo Dureghello <angelo.dureghello@timesys.com> Tested-by: Angelo Dureghello <angelo.dureghello@timesys.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06blkcache: Extend blkcache_init to cover CONFIG_NEEDS_MANUAL_RELOCOvidiu Panait
Extend manual relocation of block_cache list pointers to all platforms that enable CONFIG_NEEDS_MANUAL_RELOC. Remove m68k-specific checks and provide a single implementation that adds gd->reloc_off to the pre-relocation pointers. Acked-by: Angelo Dureghello <angelo.dureghello@timesys.com> Tested-by: Angelo Dureghello <angelo.dureghello@timesys.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Eric Nelson <eric@nelint.com> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> [trini: Add guard around DECLARE_GLOBAL_DATA_PTR to avoid size growth] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-06common/board_r: Remove initr_serial wrapperOvidiu Panait
Remove the initr_serial->serial_initialize indirection and call serial_initialize directly. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06drivers: serial: Make serial_initialize return intOvidiu Panait
serial_initialize is called only during the common init sequence, after relocation (in common/board_r.c). Because it has a void return value, it has to wrapped in initr_serial. In order to be able to get rid of this indirection, make serial_initialize return int. Remove extern from prototype in order to silence the following checkpatch warning: check: extern prototypes should be avoided in .h files Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06dm: blk: Use IS_ENABLED() instead of #ifdefs in blk_post_probeOvidiu Panait
Use IS_ENABLED() instead of #ifdef in blk_post_probe function. No functional change intended. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> [trini: Fix thinko and use CONFIG_HAVE_BLOCK_DEVICE in IS_ENABLED()] Signed-off-by: Tom Rini <trini@konsulko.com>
2020-08-06board_f: Remove setup_board_part1Ovidiu Panait
Now that all arch specific code was converted to setup_bdinfo, we can remove setup_board_part1. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06board_f: ppc: Factor out ppc-specific bdinfo setupOvidiu Panait
Factor out ppc-specific bdinfo setup from generic init sequence to arch_setup_bdinfo in arch/powerpc/lib/bdinfo.c. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06board_f: m68k: Factor out m68k-specific bdinfo setupOvidiu Panait
Factor out m68k-specific bdinfo setup to arch_setup_bdinfo in arch/m68k/lib/bdinfo.c. Also, use if(IS_ENABLED()) instead of #ifdef where possible. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06board_f: Move sram bdinfo assignments to generic codeOvidiu Panait
Move sram related bdinfo from arch-specific setup_board_part1 to generic code in setup_bdinfo. Also use "if (IS_ENABLED(CONFIG_SYS_HAS_SRAM))" instead of "#ifdef CONFIG_SYS_SRAM_BASE". Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
2020-08-06board_f: Factor out bdinfo bi_mem{start, size} to setup_bdinfoOvidiu Panait
Move all assignments to gd->bd->bi_mem{start,size} to generic code in setup_bdinfo. Xtensa architecture is special in this regard as it defines its own handling of gd->bd->bi_mem{start,size} fields. In order to avoid defining a weak SDRAM function, let arch_setup_bdinfo overwrite the generic flags. For ARC architecture, remove ARCH_EARLY_INIT_R from Kconfig since it is not needed anymore. Also, use gd->ram_base to populate bi_memstart to avoid an ifdef. Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com> Acked-by: Alexey Brodkin <abrokdin@synopsys.com> Reviewed-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 20:53:45 +0000