aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-21strider: Migrate to CONFIG_TARGET_STRIDERMario Six
Use the proper CONFIG_TARGET_STRIDER Kconfig option to replace the CONFIG_STRIDER ad-hoc config option. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21hrcon: Migrate to CONFIG_TARGET_HRCONMario Six
Use the proper CONFIG_TARGET_HRCON Kconfig option to replace the CONFIG_HRCON ad-hoc config option. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21MPC8349ITX: Migrate to CONFIG_TARGET_MPC8349ITXMario Six
Use the proper CONFIG_TARGET_MPC8349ITX Kconfig option to replace the CONFIG_MPC8349ITX ad-hoc config option. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21MPC832XEMDS: Migrate to CONFIG_TARGET_MPC832XEMDSMario Six
Use the proper CONFIG_TARGET_MPC832XEMDS Kconfig option to replace the CONFIG_MPC832XEMDS ad-hoc config option. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21ve8313: Merge BR/OR settingsMario Six
The ve8313 has the option of either configuring the eLBC (enhanced local system bus) such that * NOR flash is the first memory bank, and NAND flash is the second memory bank, or * NAND flash is the first memory bank, and NOR flash is the second memory bank, by using CONFIG_SYS_NOR_{BR,OR}_PRELIM and CONFIG_SYS_NAND_{BR,OR}_PRELIM for defining CONFIG_SYS_{BR,OR}{0,1}_PRELIM. After Kconfig migration, replacing some lines in the defconfig will have the same effect. Hence, we will not create distinct ve8313_{NOR,NAND} configs for such a small change. Instead, fix the current default (NOR first, NAND second), and unroll the CONFIG_SYS_NAND_{BR,OR}_PRELIM options. This will ease the Kconfig migration Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc8315erdb: Merge BR/OR settingsMario Six
The mpc8315erdb has the option of either configuring the eLBC (enhanced local system bus) such that * NOR flash is the first memory bank, and NAND flash is the second memory bank, or * NAND flash is the first memory bank, and NOR flash is the second memory bank, by using CONFIG_SYS_NOR_{BR,OR}_PRELIM and CONFIG_SYS_NAND_{BR,OR}_PRELIM for defining CONFIG_SYS_{BR,OR}{0,1}_PRELIM. After Kconfig migration, replacing some lines in the defconfig will have the same effect. Hence, we will not create distinct ve8313_{NOR,NAND} configs for such a small change. Instead, fix the current default (NOR first, NAND second), and unroll the CONFIG_SYS_NAND_{BR,OR}_PRELIM options. This will ease the Kconfig migration. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-21mpc83xx: Make distinct MPC8349EMDS_SDRAM boardMario Six
The MPC8349EMDS config file contains config options to enable SDRAM support. To keep this ability after the Kconfig migration, create a new MPC8349EMDS_SDRAM board that enables the SDRAM support and remove the SDRAM support from the original board. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20powerpc: Add LSDMR config valuesMario Six
The LSDMR_* macros are used to configure the system bus on MPC83xx. A few of the possible LSDMR_* macros were never defined in the respective include files. This renders the SDRAM support on the MPC8349EMDS unusable, because it uses these undefined macros. To make the SDRAM option work, introduce these macros into the proper config file. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20mpc83xx: Make distinct caddy2 configMario Six
vme8349.h contains two separate boards: The vme8349 itself, and the caddy2 board. The caddy2 board is chosen by setting certain config variables. Create a proper config file for the caddy2 board to make Kconfig migration easier. Furthermore, simplify the vme8349 and caddy2 configs by keeping only the options necessary for each board. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20vme8349: Migrate to CONFIG_TARGET_VME8349Mario Six
CONFIG_TARGET_VME8349 can replace CONFIG_VME8349. Hence, replace CONFIG_VME8349 with CONFIG_TARGET_VME8349, and remove CONFIG_VME8349. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20mpc83xx: Make distinct MPC8313ERDB targetsMario Six
MPC8313ERDB has the option of either enabling NOR or NAND boot in its config file (by commenting out certain #ifdefs). To keep this ability after migrating options to Kconfig, we introduce two MPC8313ERDB configs: one for NOR, and one for NAND. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20keymile: Make distinct kmeter1, and kmcoge5ne configsMario Six
The kmeter1, and kmcoge5ne boards also build from the same config file with #ifdef logic. Create a separate include config for each board with the #ifdef logic resolved as needed. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20keymile: Unroll km/km83xx-common.hMario Six
Simplify the keymile config files once more by unrolling the km/km83xx-common.h, and resolve the #ifdef logic as needed. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20keymile: Make distinct kmsupx5, tuge1, kmopti2, and kmtepr2 configsMario Six
The kmsupx5, tuge1, kmopti2, and kmtepr2 boards all build from the same include config file with lots of #ifdef logic. To ease Kconfig migration, create new config include files for these boards, and resolve the #ifdef logic as needed. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20keymile: Unroll includesMario Six
To further simplify config include files, unroll the km/km8309-common.h and km/km8321-common.h include files. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20keymile: Move config filesMario Six
We want to unroll several include files, while keeping include statements consistent. To make it easier to not break the include statements, move the include files to the main configs directory. All three include files moved will be unrolled, so they won't pollute the directory for long. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20keymile: Make distinct kmtegr1, kmvect1, suvd3 configsMario Six
The kmtegr1, kmvect1, and suvd3 boards all use the same config include file with lots of #ifdefs in it. The Kconfig migation will become easier if we get rid of these #ifdefs first. Hence, create distinct config include files for these boards, and unwind the #ifdef logic in these config files to only include the options necessary for each board. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20mpc83xx: Introduce ARCH_MPC837XMario Six
Replace CONFIG_MPC837x with a proper CONFIG_ARCH_MPC837X Kconfig option. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20mpc83xx: Introduce ARCH_MPC836*Mario Six
Replace CONFIG_MPC836* with proper CONFIG_ARCH_MPC836* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20mpc83xx: Introduce ARCH_MPC834*Mario Six
Replace CONFIG_MPC834* with proper CONFIG_ARCH_MPC834* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20mpc83xx: Introduce ARCH_MPC832*Mario Six
Replace CONFIG_MPC832* with proper CONFIG_ARCH_MPC832* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20mpc83xx: Introduce ARCH_MPC831*Mario Six
Replace CONFIG_MPC833* with proper CONFIG_ARCH_MPC833* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-20mpc83xx: Introduce ARCH_MPC830*Mario Six
Replace CONFIG_MPC830* with proper CONFIG_ARCH_MPC830* Kconfig options. Signed-off-by: Mario Six <mario.six@gdsys.cc>
2019-05-19Revert "Makefile: Prioritize external dtb if defined"Tom Rini
This is causing unexpected size growth in the normal case and is likely to have been mis-applied by myself. This reverts commit 3eaf6dcd9362b56e3217559401287dd8fa35b5b2. Signed-off-by: Tom Rini <trini@konsulko.com>
2019-05-19Merge tag 'efi-2019-07-rc3-2' of git://git.denx.de/u-boot-efiTom Rini
Pull request for UEFI sub-system for v2019.07-rc3 (2) Minor patches to improve UEFI specification compliance are provided. To allow running the UEFI self compliance tests an outdated version of the Unicode collation protocol has been added as a configuration option (disabled by default).
2019-05-19Merge git://git.denx.de/u-boot-x86Tom Rini
- Allow coreboot to process unhandled tags - Enable NVMe on QEMU x86_64 target
2019-05-19Merge branch '2019-05-19-master-imports'Tom Rini
- Convert SYS_[DI]CACHE_OFF to Kconfig, introduce SPL variant. - Various bcm96* fixes. - Import include/android_bootloader_message.h from AOSP - Assorted other small fixes.
2019-05-19x86: qemu-x86_64: Enable NVMeBin Meng
NVMe was turned on in qemu-x86 but somehow we missed it for 64-bit. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
2019-05-19nvme: Fix warning of cast from pointer to integer of different sizeBin Meng
When dma_addr_t is u32 in 64-bit, there are some warnings when building NVME driver. Fix it by doing an additional (long) cast. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-05-19x86: coreboot: make it possible to process unhandled tagsChristian Gmeiner
coreboot makes it possible to add own entries into coreboot's table at a per mainboard basis. As there might be some custom ones it makes sense to provide a way to process them. Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2019-05-19efi_loader: parameter check OutputStringHeinrich Schuchardt
Check the parameters against NULL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-19efi_loader: EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL.SetState() correct parameterHeinrich Schuchardt
KeyToggleState is a pointer according to UEFI spec 2.8. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-19efi_loader: GetNextMonotonicCount() check parameterHeinrich Schuchardt
Do not write to address indicated by NULL pointer. UEFI SCT II 2.6 (2017), 3.6.5 GetNextMonotonicCount(), 5.1.5.5.1 Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-19efi_loader: parameter checks CalculateCrc32()Heinrich Schuchardt
Not checking the parameters may lead reading or writing from NULL. Implement the parameter checks prescribed in the UEFI spec. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-19efi_loader: check device path in InstallMultipleProtocolInterfacesHeinrich Schuchardt
According to the UEFI spec InstallMultipleProtocolInterfaces() must check if a device path has already been installed. In this case it must return EFI_ALREADY_STARTED. Cf. UEFI SCT II 2.6 A (2017), 3.3.16 InstallMultipleProtocolInterfaces(), 5.1.3.16.1. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-19efi_loader: implement deprecated Unicode collation protocolHeinrich Schuchardt
In EFI 1.10 a version of the Unicode collation protocol using ISO 639-2 language codes existed. This protocol is not part of the UEFI specification any longer. Unfortunately it is required to run the UEFI Self Certification Test (SCT) II, version 2.6, 2017. So we implement it here for the sole purpose of running the SCT. It can be removed once a compliant SCT is available. The configuration option defaults to no. Signed-off-by: Rob Clark <robdclark@gmail.com> Most of Rob's original patch is already merged. Only the deprecated protocol is missing. Rebase it and make it configurable. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-19efi_loader: rename Unicode collation protocol 2 variablesHeinrich Schuchardt
Rename variables to make it clear they refer to the Unicode collation protocol identified by the EFI_UNICODE_PROTOCOL2_GUID. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-19efi_loader: merge adjacent sprintf()Heinrich Schuchardt
In the implementation of the device path to text protocol join adjacent sprintf() statements. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-19efi_loader: parameter checks simple network protocolHeinrich Schuchardt
Check buffer pointers are not NULL as required by the UEFI 2.7 spec. Return EFI_UNSUPPORTED instead of EFI_INVALID_PARAMETER when trying to transmit with non-zero header_size. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-19efi_loader: GetVariable set attributes for EFI_BUFFER_TOO_SMALLHeinrich Schuchardt
UEFI spec 2.7 erratum A leaves it undefined if Attributes should be set if GetVariable() returns EFI_BUFFER_TOO_SMALL. UEFI spec 2.8 defines that Attributes should be set if the return value is either EFI_SUCCESS or EFI_BUFFER_TOO_SMALL. Set Attributes if the return value is EFI_BUFFER_TOO_SMALL. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-18ARM: da850evm: Enable block cache during SPLAdam Ford
There appears to be enough RAM to support cache in SPL. This pach enables block cache in SPL. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-05-18Kconfig: fix FIT offset prompt textIbai Erkiaga
The current prompt text for FIT external offset is identical to SYS_TEXT_BASE which might confuse the users. Provided more accurate description for the prompt text. Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> Reviewed-by: Marek Vasut <marex@denx.de>
2019-05-18ARM: omap3_logic/omap35_logic: Enable GPIO in SPLAdam Ford
The MMC controller enabled card detect, so this patch enables the GPIO driver in SPL to support it. Signed-off-by: Adam Ford <aford173@gmail.com>
2019-05-18Import include/android_bootloader_message.h from AOSPAlex Deymo
This takes the latest changes from AOSP from the file bootloader_message/include/bootloader_message/bootloader_message.h in the repository https://android.googlesource.com/platform/bootable/recovery and re-licensed them to BSD-3 for U-Boot. Minimum local changes have been applied (convert C++ to C comments and adding #ifndef __UBOOT__ block to skip all the function declarations). Signed-off-by: Alex Deymo <deymo@google.com> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
2019-05-18tools: use read-only mmap in fit_check_signLuca Boccassi
Add an option to open files in read-only mode in mmap_fdt so that fit_check_sign can be used to inspect files on read-only filesystems. For example, this is useful when a key is shipped in a read-only rootfs or squashfs. Signed-off-by: Luca Boccassi <luca.boccassi@microsoft.com>
2019-05-18ata: ahci: drop read-only ahci_ioports membersChristian Gmeiner
Also get rid of ahci_setup_port(..). Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2019-05-18configs: bcm968580 disable CONFIG_CMD_BOOTEFI_SELFTESTHeinrich Schuchardt
Configuration option CONFIG_CMD_BOOTEFI_SELFTEST is useful for the development of the UEFI sub-system. For production it is not needed. Remove CONFIG_CMD_BOOTEFI_SELFTEST from bcm968580xref_ram_defconfig. Suggested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-18configs: bcm963158 disable CONFIG_CMD_BOOTEFI_SELFTESTHeinrich Schuchardt
Configuration option CONFIG_CMD_BOOTEFI_SELFTEST is useful for the development of the UEFI sub-system. For production it is not needed. Remove CONFIG_CMD_BOOTEFI_SELFTEST from bcm963158_ram_defconfig. Suggested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2019-05-18spl: Set spl_image->fdt_addr pointer for full fitImage configurationMarek Vasut
Set the spl_image->fdt_addr pointer both for simple fitImage configuration as well as full fitImage configuration, to let spl_perform_fixups() access the DT and perform modifications to it if necessary. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com>
2019-05-18ARM: mediatek: mt8516: use PSCI to reset the SoCFabien Parent
Instead of using the watchdog, let's use PSCI to perform the reset of the SoC. Signed-off-by: Fabien Parent <fparent@baylibre.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-22 05:39:45 +0000