aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-01-21ARM: mvebu: clearfog: print TLV stored product nameBaruch Siach
Use the data from EEPROM TLV to display the board identity. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-01-21ARM: mvebu: clearfog: read basic TLV dataBaruch Siach
Read RAM die capacity from the EEPROM TLV. Follow the ONIE standard that defines the Vendor Extension entry type for vendor specific data. We have no Private Enterprise Number at the moment as the standard requires. Use the dummy all 0xff value for now. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de>
2020-01-21ARM: mvebu: clearfog: add support for EEPROM TLV infoBaruch Siach
Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Stefan Roese <sr@denx.de>
2020-01-21cmd: add tlv_eeprom commandBaruch Siach
Add support for read/write of ONIE "Tlvinfo" EEPROM data format. TLV stands for Type-Length-Value. The data format is described here: https://opencomputeproject.github.io/onie/design-spec/hw_requirements.html#board-eeprom-information-format Based on U-Boot patch from the Open Compute project: https://github.com/opencomputeproject/onie/blob/ec87e872d46b9805565d2c6124b2f701ef1c07b1/patches/u-boot/common/feature-sys-eeprom-tlv-common.patch Keep only I2C EEPROM support. Use the generic eeprom driver. Fix checkpatch issues. Add support for multiple EEPROM TLV stores on the same system. This is useful in case of SOM and carrier that both provide ID and hardware configuration information. Add option to enable for SPL. This allows selection of RAM configuration based on EEPROM stored board identification. Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-01-21ARM: mvebu: clearfog: add EEPROM devicesBaruch Siach
Add device-tree description for the EEPROM devices on Armada 388 SOM rev 2.1. Another EEPROM is now on Clearfog Pro carrier rev 2.2, and Clearfog Base rev 1.3. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-01-21Merge tag 'u-boot-imx-20200121' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx --------------------------------- imx8: cleanup, fix warnings imx6ull: add VisionSOM SoM and EVK mx7ulp: fix warning due network, cleanup mx7dsabre: Fix dm probe pmic imx6: fixed for vining2000 Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/639512296
2020-01-21arm: mvebu: clearfog: enable both DDR clocksBaruch Siach
Enabled both DDR clock signals to support Clearfog variants (currently, Clearfog GTR) that need both clocks. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-01-21ddr: marvell: a38x: allow board specific clock out setupBaruch Siach
DDR clock out might be unrelated to the number of active chip-select. For example, the board might have two DDR components, but only one chip-select. The clk_enable mask allows the board to enable DDR clocks regardless of active chip-selects. Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
2020-01-20Merge tag '2020-01-20-ti-2020.04' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti K3 J721E: * DMA support. * MMC and ADMA support. * EEPROM support. * J721e High Security EVM support. * USB DT nodes K3 AM654: * Fixed boot due to pmic probe error. * USB support and DT nodes. * ADMA support DRA7xx/AM57xx: * BBAI board support * Clean up of net platform code under board/ti AM33/AM43/Davinci: * Reduce SPL size for omap3 boards. * SPL DT support for da850-lcdk * PLL divider fix for AM335x
2020-01-20Merge tag 'u-boot-stm32-20200117' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-stm - stm32mp1: split SOC and board and cleanup config
2020-01-20Merge branch '2020-01-17-reduce-size-of-common-h-even-more'Tom Rini
- Bring in Simon Glass's series that reduces what we have in <common.h> even more.
2020-01-20gitlab/azure: Update to latest container tagTom Rini
- Based on bionic-20200112 tag from Ubuntu - Add graphviz (Heinrich) Signed-off-by: Tom Rini <trini@konsulko.com>
2020-01-20colibri-imx8x: Remove unused function detail_board_ddr_info()Alifer Moraes
detail_board_ddr_info() is not used anywhere, so simply remove it. This function is only used by Layerscape, not by i.MX. This was detected by the following sparse warning: board/toradex/colibri-imx8x/colibri-imx8x.c:104:6: warning: no previous prototype for ‘detail_board_ddr_info’ [-Wmissing-prototypes] Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-01-20apalis-imx8: Remove unused function detail_board_ddr_info()Alifer Moraes
detail_board_ddr_info() is not used anywhere, so simply remove it. This function is only used by Layerscape, not by i.MX. This was detected by the following sparse warning: board/toradex/apalis-imx8/apalis-imx8.c:92:6: warning: no previous prototype for ‘detail_board_ddr_info’ [-Wmissing-prototypes] Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-01-20imx8qxp_mek: Remove unused function detail_board_ddr_info()Alifer Moraes
detail_board_ddr_info() is not used anywhere, so simply remove it. This function is only used by Layerscape, not by i.MX. This was detected by the following sparse warning: board/freescale/imx8qxp_mek/imx8qxp_mek.c:115:6: warning: no previous prototype for ‘detail_board_ddr_info’ [-Wmissing-prototypes] Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-01-20imx8qm_mek: Remove unused function detail_board_ddr_info()Alifer Moraes
detail_board_ddr_info() is not used anywhere, so simply remove it. This function is only used by Layerscape, not by i.MX. This was detected by the following sparse warning: board/freescale/imx8qm_mek/imx8qm_mek.c:102:6: warning: no previous prototype for ‘detail_board_ddr_info’ [-Wmissing-prototypes]
2020-01-20imx8qm_rom7720_a1: Remove unused function detail_board_ddr_info()Alifer Moraes
detail_board_ddr_info() is not used anywhere, so simply remove it. This function is only used by Layerscape, not by i.MX. This was detected by the following sparse warning: board/advantech/imx8qm_rom7720_a1/imx8qm_rom7720_a1.c:110:6: warning: no previous prototype for ‘detail_board_ddr_info’ [-Wmissing-prototypes] Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com> Reviewed-by: Oliver Graute <oliver.graute@kococonnector.com>
2020-01-20imx8qm_mek: Include fdt_support.h headerAlifer Moraes
Include fdt_support.h header file to fix the following sparse warning: board/freescale/imx8qm_mek/imx8qm_mek.c:116:5: warning: no previous prototype for ‘ft_board_setup’ [-Wmissing-prototypes] Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-01-20imx8qxp_mek: Include fdt_support.h headerAlifer Moraes
Include fdt_support.h header file to fix the following sparse warning: board/freescale/imx8qxp_mek/imx8qxp_mek.c:129:5: warning: no previous prototype for ‘ft_board_setup’ [-Wmissing-prototypes] Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-01-20spl: Add prototype to function spl_board_boot_device()Alifer Moraes
Add prototype to function spl_board_boot_device to fix the following sparse warning: board/freescale/imx8mm_evk/spl.c:26:5: warning: no previous prototype for ‘spl_board_boot_device’ [-Wmissing-prototypes] Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-01-20mx8mm_evk: spl: Staticize functionsAlifer Moraes
Functions spl_dram_init() and power_init_board() are used only in the scope of this file, so make them static to fix the following sparse warnings: board/freescale/imx8mm_evk/spl.c:40:6: warning: no previous prototype for ‘spl_dram_init’ [-Wmissing-prototypes] board/freescale/imx8mm_evk/spl.c:85:5: warning: no previous prototype for ‘power_init_board’ [-Wmissing-prototypes] Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-01-20imx8m: clock_imx8mm: Staticize functionsAlifer Moraes
Functions fracpll_configure(), decode_intpll(), decode_fracpll(), get_root_src_clk() and get_root_clk() are used only in the scope of this file, so make them static to fix the following sparse warnings: arch/arm/mach-imx/imx8m/clock_imx8mm.c:50:5: warning: no previous prototype for ‘fracpll_configure’ [-Wmissing-prototypes] arch/arm/mach-imx/imx8m/clock_imx8mm.c:271:5: warning: no previous prototype for ‘decode_intpll’ [-Wmissing-prototypes] arch/arm/mach-imx/imx8m/clock_imx8mm.c:418:5: warning: no previous prototype for ‘decode_fracpll’ [-Wmissing-prototypes] arch/arm/mach-imx/imx8m/clock_imx8mm.c:483:5: warning: no previous prototype for ‘get_root_src_clk’ [-Wmissing-prototypes] arch/arm/mach-imx/imx8m/clock_imx8mm.c:527:5: warning: no previous prototype for ‘get_root_clk’ [-Wmissing-prototypes] Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-01-20imx: fix typo in header fileFlavio Suligoi
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
2020-01-20fsl: fix typo in header fileFlavio Suligoi
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
2020-01-20imx8mm_evk: Include sys_proto.h headerAlifer Moraes
Add sys_proto.h header file to fix the following sparse warning: board/freescale/imx8mm_evk/imx8mm_evk.c:59:5: warning: no previous prototype for ‘board_mmc_get_env_dev’ [-Wmissing-prototypes] Signed-off-by: Alifer Moraes <alifer.wsdm@gmail.com>
2020-01-20arm: dts: imx7ulp-evk: remove mux value from pad configurationJorge Ramirez-Ortiz
The mux mode is embedded in the PAD definition and therefore there is no need to repeat it in the PAD configuration value (more over since this information will be masked out when the configuration value is applied). Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-01-20imx: imx8mm_evk: remove hdmi fw info from READMEFlavio Suligoi
The imx8mm doesn't require the hdmi firmware. Update also the fw version. Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Reviewed-by: Peng Fan <peng.fan@nxp.com>
2020-01-20mx7dsabre: Fix dm probe pmicJoris Offouga
With commit 0d52bab4621 ("mx7dsabre: Enable DM_ETH") Device Tree has been update and change pfuze3000 node Signed-off-by: Joris Offouga <offougajoris@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-01-20mx7ulp: soc: s_init should only be executed onceJorge Ramirez-Ortiz
On SPL enabled systems, the current s_init code (wdog, clock and ldo init) is executed twice (by SPL and u-boot). This is not necessary and might lead to boot issues (ie, starting PMC1 when it is already running). Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-01-20mx7ulp_evk_plugin: Disable CONFIG_NETFabio Estevam
Currently the following build warning is seen: ===================== WARNING ====================== This board does not use CONFIG_DM_ETH (Driver Model for Ethernet drivers). Please update the board to use CONFIG_DM_ETH before the v2020.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/migration.rst for more info. =================================================== Since the mx7ulp-evk board does not have networking support, explicitly disable networking. Signed-off-by: Fabio Estevam <festevam@gmail.com>
2020-01-20arm: dts: i.mx8x: add #cooling-cells propertiesAnatolij Gustschin
Fix dtb building warnings: Warning (cooling_device_property): /thermal-zones/cpu-thermal0/cooling-maps/map0: Missing property '#cooling-cells' in node /cpus/cpu@0 or bad phandle (referred from cooling-device[0]) Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-01-20ARM: imx: mx6ull: Add iMX6ULL VisionSOM SoM and EVKArkadiusz Karas
Add iMX6ULL VisionSOM SoM and VisionCB-RT-STD evaluation board support. The SoM has an iMX6ULL, 512 MiB of DRAM and microSD slot. The carrier board has Ethernet, USB host port, USB OTG port. Signed-off-by: Arkadiusz Karas <arkadiusz.karas@somlabs.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
2020-01-20ARM: imx: vining2000: Enable SPL SDP by defaultMarek Vasut
Enable SPL SDP fallback boot option in default build. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
2020-01-20ARM: imx: vining2000: Properly discern PFUZE100 and PFUZE200Marek Vasut
The PFUZE100 and PFUZE200 PMICs can be discerned by bit 0 in DeviceID register. Print the correct identification of the PMICs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de>
2020-01-20ARM: imx: vining2000: Clean up uSDHC4 setupMarek Vasut
Simplify the uSDHC4 eMMC controller setup. This is the only eMMC present on the system and only controller that is used, so drop the extra logic. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Silvio Fricke <silvio.fricke@softing.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
2020-01-20Merge branch 'master' of git://git.denx.de/u-bootStefano Babic
Signed-off-by: Stefano Babic <sbabic@denx.de>
2020-01-20arm: omap: fix MPU DPLL divisor for 800MHz clockDario Binacchi
In locked condition CLKOUT = CLKINP * [M / (N + 1)]. Signed-off-by: Dario Binacchi <dariobin@libero.it> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20clk: sci-clk: add slack to clk-set-rate passed to firmwareLokesh Vutla
Add slack to the clock frequency parameters passed to firmware within clk_set_rate. min-freq is changed to 0 and max-rate is changed to ULONG_MAX. This fixes certain issues with pll clock rounding when the firmware is not able to set the frequency exactly to the target, the current implementation fails if the available frequency is even 1Hz off the target. With the change, the firmware still tries its best to set the frequency as close as possible to the target. Reported-by: Vishal Mahaveer <vishalm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20MAINTAINERS: Update ARM TI entryLokesh Vutla
Take over TI maintainership from Tom. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Tom Rini <trini@konsulko.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: am65x_evm: Enable USB keyboard as second stdinVignesh Raghavendra
Enable USB keyboard to be used as input device at U-Boot prompt. Both serial and USB keyboard will be active inputs simultaneously. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20am65x_evm_a53_defconfig: Enable configs to support USB and DFUVignesh Raghavendra
Enable configs related to USB Host mode, Peripheral mode and DFU. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: am65x_evm: Add DFU related env variablesVignesh Raghavendra
Add env variables that set up dfu_alt_info for MMC/EMMC/OSPI. This is required to allow update of firmware on these media. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20arm: dts: k3-am654-base-board: enable USB1Vignesh Raghavendra
Add pinmux for USB1 and enable it as a peripheral port in U-Boot specific dtsi since U-Boot does not support OTG. Disable USB0 as its not available on the baseboard. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20arm: dts: k3-am65-main: add USB supportVignesh Raghavendra
Add support for USB0 and USB1 instances on the AM6 SoC. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20phy: omap-usb2-phy: Add support for AM654 USB2 PHYVignesh Raghavendra
AM654 SoC has USB2 PHY which is similar to existing USB2 PHYs on OMAP SoCs. Add support for the same. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20phy: omap-usb2-phy: Fix warnings when built for ARM64Vignesh Raghavendra
Below warning is seen when this driver is built for devices with 64 bit physical address space. drivers/phy/omap-usb2-phy.c: In function ‘omap_usb2_phy_probe’: drivers/phy/omap-usb2-phy.c:187:20: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] priv->phy_base = (void *)base; ^ Fix this by using dev_read_addr_ptr() instead of dev_read_addr(). Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20dwc3-generic: Add support for AM654 USB controllerVignesh Raghavendra
AM654 has DWC3 USB controller that is very similar to other TI SoCs. Add a new compatible to enable the same. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: am65x_evm: Add Support for ADMAFaiz Abbas
Add Support for ADMA in a53 and r5 defconfigs. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20ARM: dts: omap3/omap35 Torpedo and SOM-LV: Unify and shrink SPL dtbAdam Ford
None of these boards boot, but the solution appears to be the same. All the boards have SPL that is too large. With a few defconfig options removed, these corresponding options can be removed from their respective SPL dtb files. This patch unifies the DM37/OMAP35 boards' -u-boot.dtsi files to remove gpio's, i2c, bandgap, thermal zones, unneeded uarts, and unneeded MMC nodes. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-01-20configs: omap3/35_logic and omap3/35_logic_somlv: Reduce SPL sizeAdam Ford
Currently the DM37 and OMAP35 boards do not boot due to SPL bring too large. SPL doesn't need GPIO, I2C nor MMC sector access since it uses a FAT file system. This patch unifies all these boards to remove these unused features from their defconfigs Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 05:45:18 +0000