aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-23ls1028a: use default scan_dev_for_bootMian Yousaf Kaukab
scan_dev_for_efi is supposed to be called from scan_dev_for_boot. However this call is missing for ls1028ardb and ls1028aqds boards. As a result EFI boot doesn’t work. Fix this issue by removing custom definition of scan_dev_for_boot and use the default definition instead. Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: andy.tang@nxp.com Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-09-22Merge tag 'mips-fixes-for-2020.10' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-mips - mips: vocore2: fix SPL image generation - mips: vocore2: fix LZMA decompression errors - mips: vocore2: fix console output - mips: pic32mzda: fix DTC warnings and GPIO nodes - mips: pic32mzda: make GPIO and MMC working again
2020-09-23mips: vocore2: fix various issuesMauro Condarelli
- fix SPL image generation - fix incorrect console output - increase malloc_f and malloc_r space to fix LZMA decompression errors - increase SPI flash clock Signed-off-by: Mauro Condarelli <mc5686@mclink.it> [squashed to one patch, fix commit subject and description] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
2020-09-23mips: dts: Fix PIC32MZDA GPIO register definitionsJohn Robertson
The GPIO bank name for banks J and K are not correct when using the 'gpio' command from the console. The driver derives the bank name from the device tree instance string by using the instance value and adding 'A': gpio0@xxaddrxx is Bank A, gpio1@yyaddryy is Bank B and so on. On the PIC32, there is no Bank I so instances 8 and 9 need to be incremented as a minimum change. An alternative (less opaque) implementation would be to use a bank-name property instead but this would require modifying the driver code too. Signed-off-by: John Robertson <john.robertson@simiatec.com>
2020-09-23mips: dts: Fix PIC32MZDA GPIO register definitionsJohn Robertson
GPIO state cannot be changed via the device tree (e.g. with gpio-hog) or using the 'gpio' command from the console. The root cause is a discrepancy between the driver and the device tree: the driver code expects an absolute I/O address in the <reg> property, while the device tree defines the address relative to a declaration in the parent pinctrl node. Changing the device tree to fix a driver issue would normally be wrong, however: - I have run the first version of U-Boot in which this driver appears (v2016.03) and the same problem exists, so this is not a regression; - There is no code that references a parent device tree node that might suggest the intent of the author was to parse the DT as it exists now; - The equivalent Linux PIC32 GPIO driver also uses absolute addresses for the GPIO <reg> property. This change brings the U-Boot DT more into line with Linux. Additionally, the data sheet (Microchip ref. 60001361H) shows that the register set to control a GPIO bank spans 0xE0 bytes, but the device tree specified size is only 0x48 bytes. Signed-off-by: John Robertson <john.robertson@simiatec.com>
2020-09-23mips: dts: Fix device tree warnings for PIC32MZDAJohn Robertson
Signed-off-by: John Robertson <john.robertson@simiatec.com>
2020-09-23mips: pic32mzdask: enable CONFIG_BLKJohn Robertson
CONFIG_BLK needs to be enabled by default to allow U-Boot to compile after a 'make pic32mzdask_defconfig'. Signed-off-by: John Robertson <john.robertson@simiatec.com>
2020-09-23mips: pic32mzdask: disable SDHCI SDCD signal workaroundJohn Robertson
The PIC32MZ DA Starter Kit does not need the card detect workaround because the SDCD signal line is connected properly. Disable the workaround in this case. Signed-off-by: John Robertson <john.robertson@simiatec.com>
2020-09-23pinmux: pic32: add SDHCI pin configJohn Robertson
The GPIO pins used by the SDHCI controller need to be configured to allow the interface to work. Signed-off-by: John Robertson <john.robertson@simiatec.com>
2020-09-23mmc: pic32: Refresh PIC32 MMC driverJohn Robertson
The existing driver is not compatible with the Driver Model. This patch makes the necessary changes while also removing obsolescent calls/properties as follows: - fdtdec_* calls replaced with dev_read_* equivalents; - 'clock-freq-min-max' property replaced by querying the frequency of the source clock 'base_clk'; - The card detect erratum workaround is applied during probe rather than overriding get_cd. The card detect workaround (Microchip ref. DS80000736E, erratum #15) is not always needed and can be disabled using a vendor specific DT property. Signed-off-by: John Robertson <john.robertson@simiatec.com>
2020-09-22Merge branch '2020-09-22-assorted-bugfixes'Tom Rini
- Fix for environment location on some PowerPC boards - Typo / documentation fix - Two fixes for mpc8xxx
2020-09-22configs: powerpc: Don't set CONFIG_ENV_ADDR for QorIQ SPIFLASHChris Packham
Setting CONFIG_ENV_ADDR to something other than 0 stops gd->env_addr from being allocated dynamically. When the environment is in SPI we need it to be allocated as we can't use a direct memory mapped address. Signed-off-by: Chris Packham <judge.packham@gmail.com>
2020-09-22disk: typo Terra BytesHeinrich Schuchardt
512 * 2^32 bytes equals 2 tebibytes. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
2020-09-22doc/build/gcc.rst: add missing apt-get *install*Heinrich Schuchardt
The install command is missing for an apt-get command. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-22gpio/mpc83xx_spisel_boot.c: include log.hRasmus Villemoes
Fix build failure, it used to get this implicitly through common.h until f7ae49fc4f (common: Drop log.h from common header). Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk> Reviewed-by: Heiko Schocher <hs@denx.de>
2020-09-22spi: mpc8xxx_spi.c: fix cs activate/deactivateRasmus Villemoes
Somewhere between v2020.04 and v2020.07 the mpc8xxx_spi driver broke, I'm guessing due to this hunk @@ -559,6 +560,8 @@ int dm_gpio_set_dir_flags(struct gpio_desc *desc, ulong flags) if (ret) return ret; + /* combine the requested flags (for IN/OUT) and the descriptor flags */ + flags |= desc->flags; ret = _dm_gpio_set_dir_flags(desc, flags); from commit 695e5fd5469a ("gpio: update dir_flags management"). But the blame is mostly on the driver itself which seems rather confused: The chip select gpios are requested with GPIOD_ACTIVE_LOW, but then in each activate/deactivate, dm_gpio_set_dir_flags() is called with merely GPIOD_IS_OUT, and then the driver call set_value(0) for activate. That used to work, but with the above hunk, the ACTIVE_LOW setting from the request becomes persistent, so the gpio driver ends up being asked to set the value to 1 in mpc8xxx_spi_cs_activate(). So drop the dm_gpio_set_dir_flags() calls in the activate/deactivate functions, and use a value of 1 to mean "logically enabled". Ideally, I think we should also drop the GPIOD_ACTIVE_LOW from the request and make it up to the list of gpio cs in DT to indicate whether that CS is enabled when driven low (as is of course usually the case), but that requires changing arch/powerpc/dts/gdsys/gazerbeam-base.dtsi among others, and I don't have that hardware to test on. I have, however, tested our own (mpc8309-based) hardware with this change, and I have also tested that removing the GPIOD_ACTIVE_LOW from the request and updating our DT as - gpios = <&spisel 0 0>; + gpios = <&spisel 0 GPIO_ACTIVE_LOW>; still works. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
2020-09-21Prepare v2020.10-rc5Tom Rini
Signed-off-by: Tom Rini <trini@konsulko.com>
2020-09-21configs: Resync with savedefconfigTom Rini
Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
2020-09-21Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86Tom Rini
- Several ACPI bug fixes - Intel edison: Move config SYS_MALLOC_LEN to Kconfig - Use "emmc" in ApolloLake FSP devicetree bindings
2020-09-21x86: acpi: Add memset to initialize SPCR tableWolfgang Wallner
Add a missing memset to acpi_create_spcr(). The other acpi_create_xxxx() functions perform a memset on their structures, acpi_create_spcr() does not and as a result the contents of this table are partly uninitialized (and thus random after every reset). Fixes: b288cd960072 ("x86: acpi: Generate SPCR table") Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: fix the tags format in the commit message] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-21x86: acpi: Fix calculation of DSDT lengthWolfgang Wallner
Currently, the calculation for the length of the DSDT table includes any bytes that are added for alignment, but those bytes are not initialized. This is because the DSDT length is calculated after a call to acpi_inc_align(). Split this up into the following sequence: * acpi_inc() * Calculate DSDT length * acpi_align() Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-21x86: fsp: Replace e-mmc with emmc in devicetree bindingsWolfgang Wallner
The term eMMC is used inconsistently within the FSP devicetree bindings (e-mmc and emmc), especially for "emmc-host-max-speed" documentation and code disagree. Change all eMMC instances within the FSP bindings to consistently use "emmc". The term "emmc" is already used a lot within U-Boot, while "e-mmc" is only used in the FSP bindings. Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [bmeng: correct one typo in the commit message] Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-21cmd: acpi: Print revisions in hex formatAndy Shevchenko
The revisions are usually dates in hex-decimal format representing YYYYmmdd. Print them in hex to see this clearly. Before: ... FACP 000e5420 0000f4 (v06 U-BOOT U-BOOTBL 538970376 INTL 0) DSDT 000e4780 000ba0 (v02 U-BOOT U-BOOTBL 65536 INTL 538968870) ... After: ... FACP 000e5420 0000f4 (v06 U-BOOT U-BOOTBL 20200908 INTL 0) DSDT 000e4780 000ba0 (v02 U-BOOT U-BOOTBL 10000 INTL 20200326) ... Fixes: 0b885bcfd9b0 ("acpi: Add an acpi command") Cc: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-21x86: edison: Move config SYS_MALLOC_LEN to KconfigAndy Shevchenko
This patch moves the the config SYS_MALLOC_LEN to Kconfig as it is already done for zynq arch in commit 01aa5b8f0503 ("Kconfig: Move config SYS_MALLOC_LEN to Kconfig for zynq"). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-09-19Merge tag 'efi-2020-10-rc5-2' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-10-rc5 (2) The following bugs are fixed: * incorrect online help for setenv and env * description of function efi_mem_carve_out() * replace printf() by log_err() in stm32mp1_rng driver A unit test is provided to check that the boot hart id is provided in the RISC-V device-tree.
2020-09-19Merge branch '2020-09-18-assorted-bugfixes'Tom Rini
- SquashFS Coverity fixes - bitflip fix in the alternate memtest command - Disable networking on bcmstb boards where we didn't have any network drivers enabled.
2020-09-18efi: change 'env -e -i' usage syntaxMaxim Uvarov
'env -e -i' syntax was changed from "," to ":". Account for this also in the documentation. Fixes: 2b3fbcb59f41 ("efi_loader: use ':' as separator for setenv -i") Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Correct the usage description for setenv -e too. Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-18efi_selftest: check for RISC-V boot-hartid in FDTHeinrich Schuchardt
On RISC-V check that the /chosen node has a boot-hartid property. To run the test configure with CONFIG_CMD_BOOTEFI_SELFTEST=y and issue setenv efi_selftest device tree setenv serial# myserial bootefi selftest If the test succeeds, it reports the boot-hartid, e.g. boot-hartid: 1 Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-18efi_selftest: rework device tree testHeinrich Schuchardt
Allow specifying the node on which a property is searched. Test the device tree consistency more rigorously. Some efi_st_printf() calls have been converted to efi_st_error(). Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-18efi_memory: refine overlap_only_ram descriptionMaxim Uvarov
Refine text for overlap_only_ram description to match to what exactly flag does and aling description with other functions. Signed-off-by: Maxim Uvarov <maxim.uvarov@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-09-18rng: stm32mp1: use log() instead of printf()Heinrich Schuchardt
The logging system provides flexible filtering and enhanced output. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Sughosh Ganu <sughosh.ganu@linaro.org>
2020-09-18cmd: mem: fix range of bitflip testRalph Siemsen
The bitflip test uses two equal sized memory buffers. This is achieved by splitting the range of memory into two pieces. The address of the second buffer, as well as the length of each buffer, were not correctly calculated. This caused bitflip test to access beyond the end of range. This patch fixes the pointer arithmetic problem. A second problem arises because u-boot "mtest" command expects the ending address to be inclusive. When computing (end - start) this results in missing 1 byte of the requested length. The bitflip test expects a count rather than an "ending" address. Thus it fails to test the last word of the requested range. Fixed by using (end - start + 1). Added Kconfig option to optionally disable the bitflip test, since it does add significantly to the time taken for "mtest". Fixes: 8e434cb705d463bc8cff935160e4fb4c77cb99ab ("cmd: mem: Add bitflip memory test to alternate mtest") Signed-off-by: Ralph Siemsen <ralph.siemsen@linaro.org> Reviewed-by: Stefan Roese <sr@denx.de>
2020-09-18configs: bcmstb: Disable networking supportThomas Fitzsimmons
Silence the "Driver Model for Ethernet drivers" migration warning for the bcm7445 and bcm7260 ports, neither of which supports networking yet. Signed-off-by: Thomas Fitzsimmons <fitzsim@fitzsim.org> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-09-18fs/squashfs: Fix Coverity Scan defectsJoao Marcos Costa
Fix control flow issues and null pointer dereferences. Signed-off-by: Joao Marcos Costa <jmcosta944@gmail.com>
2020-09-18Merge tag 'u-boot-imx-20200918' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-imx ---------------------------------------------------------------- Fixes for 2020.10 ----------------- - Toradex boards - mx6qsabrelite: fix env offset - esdhc_imx: waiting for clock instead of sleep - dyn RAM calibration for entry point i.MX6 Travis: https://travis-ci.org/github/sbabic/u-boot-imx/builds/728274602
2020-09-18board: tbs2910: Disable CONFIG_ENV_VARS_UBOOT_CONFIG in defconfigSoeren Moch
This is not required for sysboot (we defined fdtfile), let's save a few bytes in the binary image without these variables. Signed-off-by: Soeren Moch <smoch@web.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-09-17Merge branch '2020-09-16-assorted-fixes'Tom Rini
- Assorted bug fixes
2020-09-17apalis-imx8qm: rename all occurences to apalis-imx8Philippe Schenker
The Toradex product is called apalis-imx8 consisting of SoM with i.MX8QM and i.MX8QP SoCs. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17colibri-imx8qxp: rename all occurences to colibri-imx8xPhilippe Schenker
The Toradex product is called colibri-imx8x consisting of SoM with i.MX8QXP and i.MX8DX SoCs. Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17mmc: fsl_esdhc_imx: check the clock stable status after config the clock rate.Haibo Chen
Currently, after config the clock rate, delay 10ms, this is quite a rough method. Check the clock stable status in the present status register is enough. Tested-by: Ji Luo <ji.luo@nxp.com> Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
2020-09-17ARM: mx6: ddr: Add support for iMX6UL/ULL/SL/SDLMarek Vasut
This patch adds support for iMX6UL/ULL/SL/SDL MMDC into the DDR calibration code. The difference between MX6DQ and MX6UL/ULL/SL is that the later SoCs have 2 SDQS registers, just like MX6SX, while the MX6DQ/MX6SDL has 8. Fixes: 4f4c128c65 ("ARM: mx6: ddr: Add support for iMX6SX") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eric Nelson <eric@nelint.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com>
2020-09-17mx6qsabrelite: increase the environment offsetDenis Pynkin
The size of the binary created with the default U-boot config is much greater than the default offset for environment `0x60000`. In case if that binary is used for booting via MMC it is overlapped with the environment stored on MMC. This leads to U-Boot corruption while saving environment with `saveenv` command and non-bootable SabreLite board. The offset for environment `CONFIG_ENV_OFFSET=0x60000` was added in commit a09fea1 but did not count in the change to `0xC0000` if option `CONFIG_ENV_IS_IN_MMC` is used. The offset is also used for variant with environment saving onto SPI NOR flash (with enabled option `CONFIG_ENV_IS_IN_SPI_FLASH`). In that case the U-Boot binary flashed on SPI NOR is also corrupted after environment saving with the original 0x60000 offset. Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2020-09-17imx8mp: Remove parts MIMX8ML7 and MIMX8ML5 supportPeng Fan
Latest datasheet revE has removed MIMX8ML7D/5D/7C/5C parts, so update u-boot to remove decoding and support for those parts. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-09-17imx8m: clock_imx8mm: add missed returnPeng Fan
Add missed return Signed-off-by: Peng Fan <peng.fan@nxp.com>
2020-09-17imx8mq: fix SSCG_PLL_REFCLK_SEL_xPeng Fan
Fix SSCG_PLL_REFCLK_SEL_x, the offset starts from 0, not 16 Reported-by: Coverity 3448860 Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com>
2020-09-17imx8mq: fix FRAC_PLL_REFCLK_SEL_MASKPeng Fan
Coverity reported dead code, however it is FRAC_PLL_REFCLK_SEL_MASK was wrongly set. Reported-by: Coverity 10045172 Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com>
2020-09-17imx7: ccm: correct target interface numPeng Fan
According to i.MX 7Dual Applications Processor Reference Manual, Rev. 1 The target interface CCM root index ranges [0,124], so the number should be 125. Reported-by: Coverity 18045 Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Ye Li <ye.li@nxp.com>
2020-09-17apalis_imx6: provide fdtfile in env instead of setting it in runtimeIgor Opaniuk
Provide fdtfile value in default env instead of setting it dynamically in runtime. Fixes: 85cb2bc686("apalis/colibri imx6: provide proper fdtfile value") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17colibri_imx6: provide fdtfile in env instead of setting it in runtimeIgor Opaniuk
Provide fdtfile value in default env instead of setting it dynamically in runtime. Fixes: 85cb2bc686("apalis/colibri imx6: provide proper fdtfile value") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
2020-09-17colibri_imx7: use preboot for fdtfile evaluationIgor Opaniuk
Enable and set preboot var with fdtfile evaluation. preboot will be checked and run immediately before starting the CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp. entering interactive mode. This provides possibility to use different boot cmds in interactive mode without manual setting fdtfile value, as it it's already evaluated before entering interactive mode. Fixes: a62c60610f("colibri_imx7_emmc: add Colibri iMX7D 1GB (eMMC) module support") Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 03:22:59 +0000