aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-17acpi: Add a function to get a device path and scopeSimon Glass
Add a function to build up the ACPI path for a device and another for its scope. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17dm: core: Add an ACPI name for the root nodeSimon Glass
This always has a fixed ACPI name so add it as a driver function. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17x86: fsp: Support a warning message when DRAM init is slowSimon Glass
With DDR4, Intel SOCs take quite a long time to init their memory. During this time, if the user is watching, it looks like SPL has hung. Add a message in this case. This works by adding a return code to fspm_update_config() that indicates whether MRC data was found and a new property to the device tree. Also add one more debug message while starting. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Tested-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com>
2020-07-17x86: Avoid #ifdef with CONFIG_HAVE_ACPI_RESUMESimon Glass
At present this enables a few arch-specific members of the global_data struct which are otherwise not part of the struct. As a result we have to use #ifdef in various places. The cost of always having these in the struct is small. Adjust things so that we can use compile-time code instead of #ifdefs. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17coral: Enable the copy framebufferSimon Glass
Enable this feature on chromebook_coral to speed up the display. With this change, the time taken to print the environment to the display without CONFIG_CONSOLE_SCROLL_LINES is reduced from 1830ms to 62ms. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17timer: Allow delays with a 32-bit microsecond timerSimon Glass
The current get_timer_us() uses 64-bit arithmetic on 32-bit machines. When implementing microsecond-level timeouts, 32-bits is plenty. Add a new function that uses an unsigned long. On 64-bit machines this is still 64-bit, but this doesn't introduce a penalty. On 32-bit machines it is more efficient. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17x86: p2sb: make P2SB driver depend on P2SB uclassWolfgang Wallner
Currently it is possible to select the P2SB driver without selecting the P2SB uclass, which can't work. Fix this by adding a "depends on" in Kconfig. Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-17drivers: p2sb: replace Primary-to-Sideband Bus with Primary to Sideband BridgeWolfgang Wallner
In Intel's documentation the term P2SB stands for "Primary to Sideband Bridge". Signed-off-by: Wolfgang Wallner <wolfgang.wallner@br-automation.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2020-07-16Merge tag 'efi-2020-10-rc1-4' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-10-rc1 (4) Improvements for the UEFI subsystem include: * support for read-only TEE-backed variables * allow to compile PK, KEK, db, dbx fixed values into U-Boot * bug fixes Python testing related changes comprise: * enable 'bootefi hello' for better test coverage * remove SKIP messages in UEFI Python tests The fitupd command is dropped. Build errors for the lsblk command are fixed.
2020-07-16efi_loader: simplify 'printenv -e'Heinrich Schuchardt
Currently default output of 'printenv -e' is restricted to variables with GUID EFI_GLOBAL_VARIABLE. This excludes db and dbx. As the number of variables is small there is no need for this restriction. If no GUID is provided, print all matching variables irrespective of GUID. Always show the numeric value of the GUID. If the GUID provided to 'setenv -e' is invalid, return CMD_RET_USAGE. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16efi_loader: describe EFI_VAR_FILE_MAGICHeinrich Schuchardt
Add documentation for EFI_VAR_FILE_MAGIC used in the file format for UEFI variables. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16efi_loader: pre-seed UEFI variablesHeinrich Schuchardt
Include a file with the initial values for non-volatile UEFI variables into the U-Boot binary. If this variable is set, changes to variable PK will not be allowed. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16efi_loader: identify PK, KEK, db, dbx correctlyHeinrich Schuchardt
To determine if a varible is on the of the authentication variables PK, KEK, db, dbx we have to check both the name and the GUID. Provide a function converting the variable-name/guid pair to an enum and use it consistently. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16efi_loader: configuration of variables storeHeinrich Schuchardt
The file based and the OP-TEE based UEFI variable store are mutually exclusive. Define them as choice options in Kconfig. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16doc: provide links to Microsoft UEFI certificatesHeinrich Schuchardt
Some distributions provide UEFI binaries like Shim that have been signed using a Microsoft certificate. Provide the download paths for the public keys. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16efi_loader: update secure stateHeinrich Schuchardt
Update the UEFI secure state when variable 'PK' is updated in the TEE variables implementation. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
2020-07-16efi_loader: restructure code for TEE variablesHeinrich Schuchardt
When using secure boot functions needed both for file and TEE based UEFI variables have to be moved to the common code module efi_var_common.c. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16efi_loader: display RO attribute with TEE-backed variablesIlias Apalodimas
A previous commit adds support for displaying variables RO flag. Let's add it on the TEE backed variable storage as well. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16efi_loader: skip warnings for network configurationHeinrich Schuchardt
Skip messages should only be written if the setup is not suitable for testing. If DHCP is enabled, we should not write a skip message if no static network configuration is supplied. Likewise if a static network configuration is supplied, we should not write a skip message if DHCP is not enabled. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16efi_selftest: enable 'bootefi hello'Heinrich Schuchardt
In our Python tests we want to run 'bootefi hello'. Enable it by default when compiling with CMD_BOOTEFI_SELFTEST. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16cmd: fix lsblk commandHeinrich Schuchardt
Add missing includes. Add CMD_LSBLK to sandbox_defconfig. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-16cmd: drop fitupd commandHeinrich Schuchardt
The `fitupd' command is not used by any board. The `dfu tftp' command provides the same capabilities. So let's drop the `fitupd' command. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-15Merge tag 'mmc-7-24-2020' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmcTom Rini
- Correct mmc_spi check condition - Generate R1/R2/R1b response - Read SSR for SD SPI
2020-07-15Merge branch '2020-07-15-ci-updates'Tom Rini
- Make sure GRUB is copied to the right place for CI on GitLab/Azure - Note in our GitHub PR template that you can use this to trigger Azure CI
2020-07-15Azure: copy GRUB to correct build pathHeinrich Schuchardt
The GRUB binaries are expected in $UBOOT_TRAVIS_BUILD_DIR. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-15.gitlab-ci.yml: copy GRUB to correct build pathHeinrich Schuchardt
The GRUB binaries are expected in $UBOOT_TRAVIS_BUILD_DIR. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
2020-07-15github: azure: Update our GitHub template to note for CITom Rini
While the general policy of not taking changes to the project via pull requests directly on GitHub has not changed, it can be useful to submit a PR there in order to trigger a CI run on Azure. These are run automatically and the results are populated back to GitHub. Add a note to the template to reflect this. Signed-off-by: Tom Rini <trini@konsulko.com>
2020-07-14Merge tag 'ti-v2020.10-rc1' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-ti - Sync DMA and CPSW DT bindings for K3 devices - Other minor fixes for mmc and other TI devices
2020-07-14mmc_spi: generate R1b response for erase and stop transmission commandPragnesh Patel
As per the SD physical layer specification version 7.10, erase command (CMD38) and stop transmission command (CMD12) will generate R1b response. R1b = R1 + busy signal A non-zero value after the R1 response indicates card is ready for next command. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com>
2020-07-14mmc: mmc_spi: Generate R1 response for erase block start and end addressPragnesh Patel
Erase block start address (CMD32) and erase block end address (CMD33) command will generate R1 response for mmc SPI mode. R1 response is 1 byte long for mmc SPI, so assign 1 byte as a response for this commands. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com>
2020-07-14mmc: mmc_spi: Read R2 response for send status command - CMD13Pragnesh Patel
Send status command (CMD13) will send R1 response under SD mode but R2 response under SPI mode. R2 response is 2 bytes long, so read 2 bytes for mmc SPI mode Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com>
2020-07-14mmc: read ssr for SD spiPragnesh Patel
The content of ssr is useful only for erase operations. This saves erase time. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com>
2020-07-14mmc: mmc_spi: generate R1 response for different mmc SPI commandsPragnesh Patel
R1 response is 1 byte long for mmc SPI commands as per the updated physical layer specification version 7.10. So correct the resp and resp_size for existing commands Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com>
2020-07-14mmc: mmc_spi: correct the while conditionPragnesh Patel
When variable i will become 0, while(i--) loop breaks but variable i will again decrement to -1 because of i-- and that's why below condition "if (!i && (r != resp_match_value)" will never execute, So doing "i--" inside of while() loop solves this problem. Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com>
2020-07-13Merge tag 'efi-2020-10-rc1-3' of ↵Tom Rini
https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for efi-2020-10-rc1 (3) Up to now UEFI variables where stored in U-Boot environment variables. Saving UEFI variables was not possible without saving the U-Boot environment variables. With this patch series file ubootefi.var in the EFI system partition is used for saving UEFI variables. Furthermore the UEFI variables are exposed for reading at runtime. Code corrections for UEFI secure boot are provided. A buffer overrun in the RSA library is fixed.
2020-07-13arm: k3: use correct weak function name spl_board_prepare_for_linuxPatrick Delaunay
Replace the function spl_board_prepare_for_boot_linux by the correct name of the weak function spl_board_prepare_for_linux defined in spl.h. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
2020-07-13mmc: omap_hsmmc: Set 3.3V for IO voltage on all placesPali Rohár
In commit commit d2c05f50e12f ("mmc: omap_hsmmc: Set 3.3V for IO voltage") was changed 3.0V IO voltage to 3.3V but it was not done on all places in omap_hsmmc driver. That commit broke eMMC support on Nokia N900. This patch fixes that problematic commit and changes 3.0V to 3.3V on all remaining places in omap_hsmmc driver. Fixes: d2c05f50e12f ("mmc: omap_hsmmc: Set 3.3V for IO voltage") Signed-off-by: Pali Rohár <pali@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Faiz Abbas <faiz_abbas@ti.com>
2020-07-13arm: k3: Consolidate and silence k3_fit_atf.sh callJan Kiszka
Buiding u-boot-spl-k3[_HS].its is currently unconditionally verbose about what it does. Change that by wrapping the call to k3_fit_atf.sh into a cmd, also using that chance to reduce duplicate lines of makefile code - only IS_HS=1 is different when CONFIG_TI_SECURE_DEVICE is on. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Lokesh Vutla <lokeshvutla@ti.com>
2020-07-13omap3_beagle: Finish current outstanding DM migrationsTom Rini
At this point in time we can now remove our legacy code and switch to enabling DM for USB and Ethernet. Cc: Derald D. Woods <woods.technical@gmail.com> Cc: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Tested-by: Derald D. Woods <woods.technical@gmail.com>
2020-07-13ARM: da850-evm: Unify config options with KconfigAdam Ford
There are two options that are currently whitelisted, but they are redundant, because there are not necessary since Kconfig options exist to basically state the same thing. CONFIG_DIRECT_NOR_BOOT and CONFIG_USE_NOR are both set together and only used by the da850 when booting from NOR, however the only time CONFIG_MTD_NOR_FLASH is configured is when booting from NOR. Since NOR doesn't need SPL, the options for SPL can be moved to a check for building SPL instead of checking for NOR. This patch removes the checks for these two config options and unifies the checks around the Kconfig option of CONFIG_MTD_NOR_FLASH. Since this board is the only board that uses these two config options, they can be removed from the whitelist table. Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-13README: davinci: Clarify when SPL is used and the target devices.Adam Ford
The documentation states that SPL is enabled in all config options for the da850. This incorrect, because devices booting from NOR do not need the SPL to do the low level initializion because when booting from NOR, the board is able to execute in place (XIP) This also clarifies that SPL isn't only used for booting from SPI, because it is also used for booting from MMC and NAND for those devices supporting those boot options. Signed-off-by: Adam Ford <aford173@gmail.com>
2020-07-13arm: dts: k3-am65: Sync CPSW DT node from kernelVignesh Raghavendra
Sync CPSW DT node from kernel and move it out of -u-boot.dtsi file. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-07-13arm: dts: k3-j721e: Sync CPSW DT node from kernelVignesh Raghavendra
Sync CPSW DT node from Kernel and move it out of -u-boot.dtsi file. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-07-13net: ti: am65-cpsw-nuss: Update driver to use kernel DTVignesh Raghavendra
Kernel DT has CPSW ports under ethernet-ports subnode. Update the driver to look for the same. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-07-13net: ti: am65-cpsw-nuss: Set ALE default thread enableVignesh Raghavendra
Force default thread to be used for RX as ALE is anyways set to Bypass mode. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-07-13net: ti: am65-cpsw-nuss: Remove dead codeVignesh Raghavendra
MDIO node is not referenced further, therefore drop the dead code. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-07-13dma: ti: k3-udma: Switch to k3_ringacc_request_rings_pairVignesh Raghavendra
We only request ring pairs via K3 DMA driver, switch to use the new k3_ringacc_request_rings_pair() to simplify the code. As a good side effect, all boot stages now use exposed RING mode which avoid maintaining proxy mode for 32 bit R5 core. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-07-13dma: ti: k3-udma: Move RX descriptor ring entries to rflow structVignesh Raghavendra
In K3 UDMA architecture, RX rings are associated with RX flows rather than RX channels, therefore move the ring pointers to udma_rflow struct Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-07-13dma: ti: k3-udma: Introduce udma_chan_config structVignesh Raghavendra
Encapsulate channel configuration in a separate struct so as to ease resetting of these fields with memset() and also to increase readability of the code. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2020-07-13soc: ti: k3-ringacc: Separate soc specific initializationVignesh Raghavendra
In preparation of adding more K3 SoCs, separate soc specific initialization add a SoC specific initialization hook. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 06:40:15 +0000